/**
* Called to put a packet on the Link Layer receive packet queue.
*
* @param rxpdu Pointer to received PDU
*/
void
ble_ll_rx_pdu_in(struct os_mbuf *rxpdu)
{
struct os_mbuf_pkthdr *pkthdr;
pkthdr = OS_MBUF_PKTHDR(rxpdu);
STAILQ_INSERT_TAIL(&g_ble_ll_data.ll_rx_pkt_q, pkthdr, omp_next);
os_eventq_put(&g_ble_ll_data.ll_evq, &g_ble_ll_data.ll_rx_pkt_ev);
}
/**
* Called to indicate the advertising event is over.
*
* Context: Interrupt
*
* @param advsm
*
*/
static void
ble_ll_adv_tx_done(void *arg)
{
struct ble_ll_adv_sm *advsm;
advsm = (struct ble_ll_adv_sm *)arg;
os_eventq_put(&g_ble_ll_data.ll_evq, &advsm->adv_txdone_ev);
ble_ll_log(BLE_LL_LOG_ID_ADV_TXDONE, ble_ll_state_get(), 0, 0);
ble_ll_state_set(BLE_LL_STATE_STANDBY);
}
/**
* Called to put a packet on the Link Layer transmit packet queue.
*
* @param txpdu Pointer to transmit packet
*/
void
ble_ll_acl_data_in(struct os_mbuf *txpkt)
{
os_sr_t sr;
struct os_mbuf_pkthdr *pkthdr;
pkthdr = OS_MBUF_PKTHDR(txpkt);
OS_ENTER_CRITICAL(sr);
STAILQ_INSERT_TAIL(&g_ble_ll_data.ll_tx_pkt_q, pkthdr, omp_next);
OS_EXIT_CRITICAL(sr);
os_eventq_put(&g_ble_ll_data.ll_evq, &g_ble_ll_data.ll_tx_pkt_ev);
}
int
ble_hs_tx_data(struct os_mbuf *om)
{
int rc;
rc = os_mqueue_put(&ble_hs_tx_q, &ble_hs_evq, om);
if (rc != 0) {
return BLE_HS_EOS;
}
os_eventq_put(ble_hs_parent_evq, &ble_hs_event_co.cf_c.c_ev);
return 0;
}
/*
* Receive a character from UART.
*/
static int
nmgr_uart_rx_char(void *arg, uint8_t data)
{
struct nmgr_uart_state *nus = (struct nmgr_uart_state *)arg;
struct os_mbuf *m;
int rc;
if (!nus->nus_rx) {
m = os_msys_get_pkthdr(SHELL_NLIP_MAX_FRAME, 0);
if (!m) {
return 0;
}
nus->nus_rx = OS_MBUF_PKTHDR(m);
if (OS_MBUF_TRAILINGSPACE(m) < SHELL_NLIP_MAX_FRAME) {
/*
* mbuf is too small.
*/
os_mbuf_free_chain(m);
nus->nus_rx = NULL;
return 0;
}
}
m = OS_MBUF_PKTHDR_TO_MBUF(nus->nus_rx);
if (data == '\n') {
/*
* Full line of input. Process it outside interrupt context.
*/
assert(!nus->nus_rx_q);
nus->nus_rx_q = nus->nus_rx;
nus->nus_rx = NULL;
os_eventq_put(g_mgmt_evq, &nus->nus_cb_ev);
return 0;
} else {
rc = os_mbuf_append(m, &data, 1);
if (rc == 0) {
return 0;
}
}
/* failed */
nus->nus_rx->omp_len = 0;
m->om_len = 0;
os_mbuf_free_chain(SLIST_NEXT(m, om_next));
SLIST_NEXT(m, om_next) = NULL;
return 0;
}
/**
* Sends an HCI command to the controller. On success, the supplied buffer is
* relinquished to the controller task. On failure, the caller must free the
* buffer.
*
* @param cmd A flat buffer containing the HCI command to
* send.
*
* @return 0 on success;
* BLE_ERR_MEM_CAPACITY on HCI buffer exhaustion.
*/
int
ble_ll_hci_cmd_rx(uint8_t *cmd, void *arg)
{
struct os_event *ev;
/* Get an event structure off the queue */
ev = &g_ble_ll_hci_cmd_ev;
if (ev->ev_queued) {
return BLE_ERR_MEM_CAPACITY;
}
/* Fill out the event and post to Link Layer */
ev->ev_queued = 0;
ev->ev_arg = cmd;
os_eventq_put(&g_ble_ll_data.ll_evq, ev);
return 0;
}
/* XXX: For now, put this here */
int
ble_hci_transport_ctlr_event_send(uint8_t *hci_ev)
{
os_error_t err;
struct os_event *ev;
assert(hci_ev != NULL);
/* Get an event structure off the queue */
ev = (struct os_event *)os_memblock_get(&g_hci_os_event_pool);
if (!ev) {
err = os_memblock_put(&g_hci_cmd_pool, hci_ev);
assert(err == OS_OK);
return -1;
}
/* Fill out the event and post to Link Layer */
ev->ev_queued = 0;
ev->ev_type = BLE_HOST_HCI_EVENT_CTLR_EVENT;
ev->ev_arg = hci_ev;
os_eventq_put(&ble_hs_evq, ev);
return 0;
}
/**
* Called when an advertising event is over.
*
* Context: Link Layer task.
*
* @param arg Pointer to advertising state machine.
*/
static void
ble_ll_adv_done(struct ble_ll_adv_sm *advsm)
{
uint8_t mask;
uint8_t final_adv_chan;
int32_t delta_t;
uint32_t itvl;
uint32_t start_time;
assert(advsm->enabled);
/* Remove the element from the schedule if it is still there. */
ble_ll_sched_rmv_elem(&advsm->adv_sch);
os_eventq_remove(&g_ble_ll_data.ll_evq, &advsm->adv_txdone_ev);
/*
* Check if we have ended our advertising event. If our last advertising
* packet was sent on the last channel, it means we are done with this
* event.
*/
if (advsm->adv_chanmask & 0x04) {
final_adv_chan = BLE_PHY_ADV_CHAN_START + 2;
} else if (advsm->adv_chanmask & 0x02) {
final_adv_chan = BLE_PHY_ADV_CHAN_START + 1;
} else {
final_adv_chan = BLE_PHY_ADV_CHAN_START;
}
if (advsm->adv_chan == final_adv_chan) {
/* Check if we need to resume scanning */
ble_ll_scan_chk_resume();
/* This event is over. Set adv channel to first one */
advsm->adv_chan = ble_ll_adv_first_chan(advsm);
/* Calculate start time of next advertising event */
itvl = advsm->adv_itvl_usecs;
if (advsm->adv_type != BLE_HCI_ADV_TYPE_ADV_DIRECT_IND_HD) {
itvl += rand() % (BLE_LL_ADV_DELAY_MS_MAX * 1000);
}
advsm->adv_event_start_time += os_cputime_usecs_to_ticks(itvl);
advsm->adv_pdu_start_time = advsm->adv_event_start_time;
/*
* The scheduled time better be in the future! If it is not, we will
* just keep advancing until we the time is in the future
*/
start_time = advsm->adv_pdu_start_time -
os_cputime_usecs_to_ticks(XCVR_TX_SCHED_DELAY_USECS);
delta_t = (int32_t)(start_time - os_cputime_get32());
if (delta_t < 0) {
/* Calculate start time of next advertising event */
while (delta_t < 0) {
itvl = advsm->adv_itvl_usecs;
if (advsm->adv_type != BLE_HCI_ADV_TYPE_ADV_DIRECT_IND_HD) {
itvl += rand() % (BLE_LL_ADV_DELAY_MS_MAX * 1000);
}
itvl = os_cputime_usecs_to_ticks(itvl);
advsm->adv_event_start_time += itvl;
advsm->adv_pdu_start_time = advsm->adv_event_start_time;
delta_t += (int32_t)itvl;
}
}
} else {
/*
* Move to next advertising channel. If not in the mask, just
* increment by 1. We can do this because we already checked if we
* just transmitted on the last advertising channel
*/
++advsm->adv_chan;
mask = 1 << (advsm->adv_chan - BLE_PHY_ADV_CHAN_START);
if ((mask & advsm->adv_chanmask) == 0) {
++advsm->adv_chan;
}
/*
* We will transmit right away. Set next pdu start time to now
* plus a xcvr start delay just so we dont count late adv starts
*/
advsm->adv_pdu_start_time = os_cputime_get32() +
os_cputime_usecs_to_ticks(XCVR_TX_SCHED_DELAY_USECS);
}
/*
* Stop high duty cycle directed advertising if we have been doing
* it for more than 1.28 seconds
*/
if (advsm->adv_type == BLE_HCI_ADV_TYPE_ADV_DIRECT_IND_HD) {
if (advsm->adv_pdu_start_time >= advsm->adv_dir_hd_end_time) {
/* Disable advertising */
advsm->enabled = 0;
ble_ll_conn_comp_event_send(NULL, BLE_ERR_DIR_ADV_TMO,
advsm->conn_comp_ev);
advsm->conn_comp_ev = NULL;
ble_ll_scan_chk_resume();
return;
}
}
/* We need to regenerate our RPA's if we have passed timeout */
#if (MYNEWT_VAL(BLE_LL_CFG_FEAT_LL_PRIVACY) == 1)
ble_ll_adv_chk_rpa_timeout(advsm);
#endif
/* Schedule advertising transmit */
ble_ll_adv_set_sched(advsm, 0);
/*
* In the unlikely event we cant reschedule this, just post a done
* event and we will reschedule the next advertising event
*/
if (ble_ll_sched_adv_reschedule(&advsm->adv_sch)) {
os_eventq_put(&g_ble_ll_data.ll_evq, &advsm->adv_txdone_ev);
}
}
void
ble_hs_event_enqueue(struct os_event *ev)
{
os_eventq_put(&ble_hs_evq, ev);
os_eventq_put(ble_hs_parent_evq, &ble_hs_event_co.cf_c.c_ev);
}
/**
* Called to post event to Link Layer when a data buffer overflow has
* occurred.
*
* Context: Interrupt
*
*/
void
ble_ll_data_buffer_overflow(void)
{
os_eventq_put(&g_ble_ll_data.ll_evq, &g_ble_ll_data.ll_dbuf_overflow_ev);
}
/**
* ble ll event send
*
* Send an event to the Link Layer task
*
* @param ev Event to add to the Link Layer event queue.
*/
void
ble_ll_event_send(struct os_event *ev)
{
os_eventq_put(&g_ble_ll_data.ll_evq, ev);
}
/**
* ADP5061 IRQ
* Add interrupt handling task to queue
*/
static void
adp5061_isr(void *arg){
os_eventq_put(os_eventq_dflt_get(), &interrup_handler);
}
