/* @fn LoacationApp_Sleep
* @brief Sample Application set allow/disallow sleep mode.
* @return none*/
void LoacationApp_Sleep( uint8 allow ) {
#if defined( POWER_SAVING )
if ( allow ) {
osal_pwrmgr_task_state( NWK_TaskID, PWRMGR_CONSERVE );
NLME_SetPollRate( 0 );
} else {
osal_pwrmgr_task_state( NWK_TaskID, PWRMGR_HOLD );
NLME_SetPollRate( 1000 );
}
#endif
}
void ther_wake_lock(void)
{
struct ther_info *ti = &ther_info;
if (ti->lock_users == 0) {
osal_pwrmgr_task_state(ti->task_id, PWRMGR_HOLD);
}
ti->lock_users++;
}
void ther_wake_unlock(void)
{
struct ther_info *ti = &ther_info;
ti->lock_users--;
if (ti->lock_users == 0) {
osal_pwrmgr_task_state(ti->task_id, PWRMGR_CONSERVE);
}
}
HAL_ISR_FUNCTION(port1Isr, P1INT_VECTOR)
#endif
{
HAL_ENTER_ISR();
PxIFG = 0;
PxIF = 0;
dmaRdyIsr = 1;
#ifdef POWER_SAVING
CLEAR_SLEEP_MODE();
osal_pwrmgr_task_state(Hal_TaskID, PWRMGR_HOLD);
#if HAL_UART_TX_BY_ISR
if (dmaCfg.txHead == dmaCfg.txTail) {
HAL_UART_DMA_CLR_RDY_OUT();
}
#endif
#endif
HAL_EXIT_ISR();
}
HAL_ISR_FUNCTION(port0Isr, P0INT_VECTOR)
{
unsigned char status;
unsigned char i;
HAL_ENTER_ISR();
status = P0IFG;
status &= P0IEN;
if (status)
{
P0IFG = ~status;
P0IF = 0;
#if HAL_UART_DMA == 1
extern uint8 Hal_TaskID;
extern volatile uint8 dmaRdyIsr;
dmaRdyIsr = 1;
CLEAR_SLEEP_MODE();
osal_pwrmgr_task_state(Hal_TaskID, PWRMGR_HOLD);
#if HAL_UART_TX_BY_ISR
if (dmaCfg.txHead == dmaCfg.txTail)
{
HAL_UART_DMA_CLR_RDY_OUT();
}
#endif
#endif // HAL_UART_DMA
for (i = 0; i < OS_MAX_INTERRUPT; i++)
{
if (PIN_MAJOR(blueBasic_interrupts[i].pin) == 0 && (status & (1 << PIN_MINOR(blueBasic_interrupts[i].pin))))
{
osal_set_event(blueBasic_TaskID, BLUEBASIC_EVENT_INTERRUPT << i);
}
}
}
HAL_EXIT_ISR();
}
/**************************************************************************************************
* @fn Hal_ProcessEvent
*
* @brief Hal Process Event
*
* @param task_id - Hal TaskId
* events - events
*
* @return None
**************************************************************************************************/
uint16 Hal_ProcessEvent( uint8 task_id, uint16 events )
{
uint8 *msgPtr;
(void)task_id; // Intentionally unreferenced parameter
if ( events & SYS_EVENT_MSG )
{
msgPtr = osal_msg_receive(Hal_TaskID);
while (msgPtr)
{
/* Do something here - for now, just deallocate the msg and move on */
/* De-allocate */
osal_msg_deallocate( msgPtr );
/* Next */
msgPtr = osal_msg_receive( Hal_TaskID );
}
return events ^ SYS_EVENT_MSG;
}
#if (defined HAL_BUZZER) && (HAL_BUZZER == TRUE)
if (events & HAL_BUZZER_EVENT)
{
HalBuzzerStop();
return events ^ HAL_BUZZER_EVENT;
}
#endif
#ifdef CC2591_COMPRESSION_WORKAROUND
if ( events & PERIOD_RSSI_RESET_EVT )
{
macRxResetRssi();
return (events ^ PERIOD_RSSI_RESET_EVT);
}
#endif
if ( events & HAL_LED_BLINK_EVENT )
{
#if (defined (BLINK_LEDS)) && (HAL_LED == TRUE)
HalLedUpdate();
#endif /* BLINK_LEDS && HAL_LED */
return events ^ HAL_LED_BLINK_EVENT;
}
if (events & HAL_KEY_EVENT)
{
#if (defined HAL_KEY) && (HAL_KEY == TRUE)
/* Check for keys */
HalKeyPoll();
/* if interrupt disabled, do next polling */
if (!Hal_KeyIntEnable)
{
osal_start_timerEx( Hal_TaskID, HAL_KEY_EVENT, 100);
}
#endif
return events ^ HAL_KEY_EVENT;
}
#if defined POWER_SAVING
if ( events & HAL_SLEEP_TIMER_EVENT )
{
halRestoreSleepLevel();
return events ^ HAL_SLEEP_TIMER_EVENT;
}
if ( events & HAL_PWRMGR_HOLD_EVENT )
{
(void)osal_pwrmgr_task_state(Hal_TaskID, PWRMGR_HOLD);
(void)osal_stop_timerEx(Hal_TaskID, HAL_PWRMGR_CONSERVE_EVENT);
(void)osal_clear_event(Hal_TaskID, HAL_PWRMGR_CONSERVE_EVENT);
return (events & ~(HAL_PWRMGR_HOLD_EVENT | HAL_PWRMGR_CONSERVE_EVENT));
}
if ( events & HAL_PWRMGR_CONSERVE_EVENT )
{
(void)osal_pwrmgr_task_state(Hal_TaskID, PWRMGR_CONSERVE);
return events ^ HAL_PWRMGR_CONSERVE_EVENT;
}
#endif
return 0;
}
/*********************************************************************
* @fn ParkingApp_Init
*
* @brief Initialization function for the Generic App Task.
* This is called during initialization and should contain
* any application specific initialization (ie. hardware
* initialization/setup, table initialization, power up
* notificaiton ... ).
*
* @param task_id - the ID assigned by OSAL. This ID should be
* used to send messages and set timers.
*
* @return none
*/
void ParkingApp_Init( uint8 task_id )
{
//开始应用初始化，闪灯
//HalLedSet(HAL_LED_1,HAL_LED_MODE_FLASH);
HalLedBlink( HAL_LED_1, 10, 50, 1000 );
ParkingApp_TaskID = task_id;
ParkingApp_NwkState = DEV_INIT;
ParkingApp_TransID = 0;
// Device hardware initialization can be added here or in main() (Zmain.c).
// If the hardware is application specific - add it here.
// If the hardware is other parts of the device add it in main().
#if defined ( BUILD_ALL_DEVICES )
// The "Demo" target is setup to have BUILD_ALL_DEVICES and HOLD_AUTO_START
// We are looking at a jumper (defined in ParkingAppHw.c) to be jumpered
// together - if they are - we will start up a coordinator. Otherwise,
// the device will start as a router.
if ( readCoordinatorJumper() )
zgDeviceLogicalType = ZG_DEVICETYPE_COORDINATOR;
else
zgDeviceLogicalType = ZG_DEVICETYPE_ROUTER;
#endif // BUILD_ALL_DEVICES
#if defined ( HOLD_AUTO_START )
// HOLD_AUTO_START is a compile option that will surpress ZDApp
// from starting the device and wait for the application to
// start the device.
ZDOInitDevice(0);
#endif
// Setup for the periodic message's destination address
// Broadcast to everyone
#if (defined DATABROADCAST && DATABROADCAST == TRUE)
ParkingApp_Periodic_DstAddr.addrMode = (afAddrMode_t)AddrBroadcast; //afAddr16Bit;
ParkingApp_Periodic_DstAddr.addr.shortAddr = 0xFFFF; // 0x0000;
#else
ParkingApp_Periodic_DstAddr.addrMode = (afAddrMode_t)afAddr16Bit;
ParkingApp_Periodic_DstAddr.addr.shortAddr = 0x0000;
#endif
ParkingApp_Periodic_DstAddr.endPoint = PARKINGAPP_ENDPOINT;
// Fill out the endpoint description.
ParkingApp_epDesc.endPoint = PARKINGAPP_ENDPOINT;
ParkingApp_epDesc.task_id = &ParkingApp_TaskID;
ParkingApp_epDesc.simpleDesc = (SimpleDescriptionFormat_t *)&ParkingApp_SimpleDesc;
ParkingApp_epDesc.latencyReq = noLatencyReqs;
// Register the endpoint description with the AF
afRegister( &ParkingApp_epDesc );
// Register for all key events - This app will handle all key events
RegisterForKeys( ParkingApp_TaskID );
osal_pwrmgr_task_state( ParkingApp_TaskID, PWRMGR_CONSERVE );
// Set TXPOWER
// MAC_MlmeSetReq( ZMacPhyTransmitPower, &txPower );
// By default, all devices start out in Group 1
ParkingApp_Group.ID = 0x0005;
osal_memcpy( ParkingApp_Group.name, "Group 1", 7 );
aps_AddGroup( PARKINGAPP_ENDPOINT, &ParkingApp_Group );
}
void ECGSensor_Init( uint8 task_id )
{
ECGSensor_TaskID = task_id;
#ifdef POWER_SAVING
(void)osal_pwrmgr_task_state( task_id, PWRMGR_CONSERVE );
#endif
uart_open();
// Setup the GAP Peripheral Role Profile
// 对于CC2540_ECG, 设备初始化时，进行广播
uint8 initial_advertising_enable = TRUE;
// By setting this to zero, the device will go into the waiting state after
// being discoverable for 30.72 second, and will not being advertising again
// until the enabler is set back to TRUE
uint16 gapRole_AdvertOffTime = 0;
uint8 enable_update_request = DEFAULT_ENABLE_UPDATE_REQUEST;
uint16 desired_min_interval = DEFAULT_DESIRED_MIN_CONN_INTERVAL;
uint16 desired_max_interval = DEFAULT_DESIRED_MAX_CONN_INTERVAL;
uint16 desired_slave_latency = DEFAULT_DESIRED_SLAVE_LATENCY;
uint16 desired_conn_timeout = DEFAULT_DESIRED_CONN_TIMEOUT;
// Set the GAP Role Parameters
GAPRole_SetParameter( GAPROLE_ADVERT_ENABLED, sizeof( uint8 ), &initial_advertising_enable );
GAPRole_SetParameter( GAPROLE_ADVERT_OFF_TIME, sizeof( uint16 ), &gapRole_AdvertOffTime );
GAPRole_SetParameter( GAPROLE_SCAN_RSP_DATA, sizeof ( scanRspData ), scanRspData );
GAPRole_SetParameter( GAPROLE_ADVERT_DATA, sizeof( advertData ), advertData );
GAPRole_SetParameter( GAPROLE_PARAM_UPDATE_ENABLE, sizeof( uint8 ), &enable_update_request );
GAPRole_SetParameter( GAPROLE_MIN_CONN_INTERVAL, sizeof( uint16 ), &desired_min_interval );
GAPRole_SetParameter( GAPROLE_MAX_CONN_INTERVAL, sizeof( uint16 ), &desired_max_interval );
GAPRole_SetParameter( GAPROLE_SLAVE_LATENCY, sizeof( uint16 ), &desired_slave_latency );
GAPRole_SetParameter( GAPROLE_TIMEOUT_MULTIPLIER, sizeof( uint16 ), &desired_conn_timeout );
// Set the GAP Characteristics
GGS_SetParameter( GGS_DEVICE_NAME_ATT, GAP_DEVICE_NAME_LEN, attDeviceName );
// Set advertising interval
uint16 advInt = DEFAULT_ADVERTISING_INTERVAL;
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_LIM_DISC_ADV_INT_MAX, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MIN, advInt );
GAP_SetParamValue( TGAP_GEN_DISC_ADV_INT_MAX, advInt );
// Setup the GAP Bond Manager
uint32 passkey = 0; // passkey "000000"
uint8 pairMode = GAPBOND_PAIRING_MODE_WAIT_FOR_REQ;
uint8 mitm = TRUE;
uint8 ioCap = GAPBOND_IO_CAP_DISPLAY_ONLY;
uint8 bonding = TRUE;
GAPBondMgr_SetParameter( GAPBOND_DEFAULT_PASSCODE, sizeof ( uint32 ), &passkey );
GAPBondMgr_SetParameter( GAPBOND_PAIRING_MODE, sizeof ( uint8 ), &pairMode );
GAPBondMgr_SetParameter( GAPBOND_MITM_PROTECTION, sizeof ( uint8 ), &mitm );
GAPBondMgr_SetParameter( GAPBOND_IO_CAPABILITIES, sizeof ( uint8 ), &ioCap );
GAPBondMgr_SetParameter( GAPBOND_BONDING_ENABLED, sizeof ( uint8 ), &bonding );
// Initialize GATT attributes
GGS_AddService( GATT_ALL_SERVICES ); // GAP
GATTServApp_AddService( GATT_ALL_SERVICES ); // GATT attributes
DevInfo_AddService(); // Device Information Service
SimpleProfile_AddService( GATT_ALL_SERVICES ); // Simple GATT Profile
// 设置Battery Characteristic Values
uint8 critical = DEFAULT_BATT_CRITICAL_LEVEL;
Batt_SetParameter( BATT_PARAM_CRITICAL_LEVEL, sizeof (uint8 ), &critical );
Batt_AddService( ); // 电池电量服务
//Register for Battery service callback;
Batt_Register ( ECGSensorBattCB );
// Setup the SimpleProfile Characteristic Values
uint8 charValue1 = 1;
uint8 charValue2 = 2;
uint8 charValue3 = 3;
uint8 charValue4 = 4;
uint8 charValue5[SIMPLEPROFILE_CHAR5_LEN] = { 1, 2, 3, 4, 5 };
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR1, sizeof ( uint8 ), &charValue1 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR2, sizeof ( uint8 ), &charValue2 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR3, sizeof ( uint8 ), &charValue3 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR4, sizeof ( uint8 ), &charValue4 );
SimpleProfile_SetParameter( SIMPLEPROFILE_CHAR5, SIMPLEPROFILE_CHAR5_LEN, charValue5 );
// Simple Keys Profile
SK_AddService( GATT_ALL_SERVICES );
// Register for all key events - This app will handle all key events
RegisterForKeys( ECGSensor_TaskID );
// Register callback with SimpleGATTprofile
VOID SimpleProfile_RegisterAppCBs( &ECGSensor_SimpleProfileCBs );
// Enable clock divide on halt
// This reduces active current while radio is active and CC254x MCU
// is halted
HCI_EXT_ClkDivOnHaltCmd( HCI_EXT_ENABLE_CLK_DIVIDE_ON_HALT );
// makes sure LEDs are off
HalLedSet( (HAL_LED_1), HAL_LED_MODE_OFF );
HalLedSet( (HAL_LED_2), HAL_LED_MODE_ON );
// Setup a delayed profile startup
osal_set_event( ECGSensor_TaskID, START_DEVICE_EVT );
// 初始化ADS1194
ADS1194_Init(ECGRate,ECGGain);
}