Пример #1
0
papi_status_t
class_status_to_attributes(printer_t *p, char *printer, short status,
		char *reject_reason, long reject_date)
{
	if (p == NULL)
		return (PAPI_BAD_ARGUMENT);

	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-reject-reason", reject_reason);
	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-reject-date", reject_date);

	/* add the current system time */
	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
			"printer-current-time", time(NULL));

	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
			"printer-up-time", time(NULL));

	/* add the status information */
	lpsched_printer_status_to_attributes(&p->attributes, status);

	papiAttributeListAddString(&p->attributes, PAPI_ATTR_EXCL,
			"printer-state-reasons", "none");

	lpsched_printer_defaults(&p->attributes);

	return (PAPI_OK);
}
Пример #2
0
papi_status_t
papiServiceSetEncryption(papi_service_t handle,
                         papi_encryption_t encryption)
{
    service_t *svc = handle;

    if (svc == NULL)
        return (PAPI_BAD_ARGUMENT);

    return (papiAttributeListAddInteger(&svc->attributes, PAPI_ATTR_REPLACE,
                                        "encryption", (int)encryption));
}
Пример #3
0
static papi_status_t
ipp_initialize_response(papi_attribute_t **request,
			papi_attribute_t ***response)
{
	papi_attribute_t **operational = NULL;
	int i;

	if ((request == NULL) || (response == NULL))
		return (PAPI_BAD_ARGUMENT);

	/* If the response was initialized, start over */
	if (*response != NULL) {
		papiAttributeListFree(*response);
		*response = NULL;
	}

	/* Add the basic ipp header information to the response */
	(void) papiAttributeListGetInteger(request, NULL, "version-major", &i);
	(void) papiAttributeListAddInteger(response, PAPI_ATTR_REPLACE,
					"version-major", i);
	(void) papiAttributeListGetInteger(request, NULL, "version-minor", &i);
	(void) papiAttributeListAddInteger(response, PAPI_ATTR_REPLACE,
					"version-minor", i);

	(void) papiAttributeListGetInteger(request, NULL, "request-id", &i);
	(void) papiAttributeListAddInteger(response, PAPI_ATTR_REPLACE,
					"request-id", i);

	/* Add a default operational attributes group to the response */
	(void) papiAttributeListAddString(&operational, PAPI_ATTR_EXCL,
			"attributes-charset", "utf-8");
	(void) papiAttributeListAddString(&operational, PAPI_ATTR_EXCL,
			"attributes-natural-language", "en-us");

	(void) papiAttributeListAddCollection(response, PAPI_ATTR_REPLACE,
				"operational-attributes-group", operational);
	papiAttributeListFree(operational);

	return (PAPI_OK);
}
Пример #4
0
void
lpsched_printer_status_to_attributes(papi_attribute_t ***attrs,
	unsigned short status)
{
	if (attrs == NULL)
		return;

	if (status & (PS_DISABLED|PS_LATER|PS_FAULTED|PS_FORM_FAULT)) {
		papiAttributeListAddInteger(attrs, PAPI_ATTR_REPLACE,
				"printer-state", 0x05); /* stopped */
		if (status & PS_LATER)
			papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
				"printer-state-reasons", "moving-to-paused");
		else if (status & PS_FAULTED)
			papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
				"printer-state-reasons", "none");
		else if (status & PS_FORM_FAULT)
			papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
				"printer-state-reasons",
				"interpreter-resource-unavailable");
		else
			papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
				"printer-state-reasons", "paused");
	} else if (status & PS_BUSY) {
		papiAttributeListAddInteger(attrs, PAPI_ATTR_REPLACE,
				"printer-state", 0x04); /* processing */
		papiAttributeListAddString(attrs, PAPI_ATTR_REPLACE,
				"printer-state-reasons", "moving-to-paused");
	} else {
		papiAttributeListAddInteger(attrs, PAPI_ATTR_REPLACE,
				"printer-state", 0x03); /* idle */
	}

	papiAttributeListAddBoolean(attrs, PAPI_ATTR_REPLACE,
			"printer-is-accepting-jobs",
			((status & PS_REJECTED) != PS_REJECTED));
	papiAttributeListAddBoolean(attrs, PAPI_ATTR_REPLACE,
			"printer-is-processing-jobs",
			((status & PS_DISABLED) != PS_DISABLED));
}
Пример #5
0
void
lpsched_printer_defaults(papi_attribute_t ***attributes)
{
	if (attributes == NULL)
		return;

	papiAttributeListAddBoolean(attributes, PAPI_ATTR_REPLACE,
			"multiple-document-jobs-supported", PAPI_TRUE);
	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
			"multiple-document-handling-supported",
			"seperate-documents-colated-copies");
	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
			"pdl-override-supported", "not-attempted");
	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
			"job-priority-supported", 40);
	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
			"job-priority-default", 20);
	papiAttributeListAddRange(attributes, PAPI_ATTR_REPLACE,
			"copies-supported", 1, 65535);
	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
			"copies-default", 1);
	papiAttributeListAddBoolean(attributes, PAPI_ATTR_REPLACE,
			"page-ranges-supported", PAPI_TRUE);
	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
			"number-up-supported", 1);
	papiAttributeListAddInteger(attributes, PAPI_ATTR_REPLACE,
			"number-up-default", 1);
	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
			"job-hold-until-supported", "no-hold");
	papiAttributeListAddString(attributes, PAPI_ATTR_APPEND,
			"job-hold-until-supported", "indefinite");
	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
			"job-hold-until-default", "no-hold");
	papiAttributeListAddString(attributes, PAPI_ATTR_REPLACE,
			"document-format-default", "application/octet-stream");

}
Пример #6
0
papi_status_t
ipp_process_request(papi_attribute_t **request, papi_attribute_t ***response,
	ipp_reader_t iread, void *fd)
{
	papi_status_t result = PAPI_OK;

	ipp_initialize_response(request, response);

#ifdef DEBUG
	fprintf(stderr, "REQUEST:");
	papiAttributeListPrint(stderr, request, " %d  ", getpid());
	fprintf(stderr, "\n");
#endif

	/* verify that the request is "well-formed" */
	if ((result = ipp_validate_request(request, response)) == PAPI_OK) {
		papi_service_t svc = NULL;
		ipp_handler_t *handler;

		result = print_service_connect(&svc, request, response);
		handler = ipp_operation_handler(request, response);

		/* process the request */
		if ((result == PAPI_OK) && (handler != NULL))
			result = (handler)(svc, request, response, iread, fd);
#ifdef DEBUG
		fprintf(stderr, "RESULT: %s\n", papiStatusString(result));
#endif
		papiServiceDestroy(svc);
	}

	(void) papiAttributeListAddInteger(response, PAPI_ATTR_EXCL,
				"status-code", result);
	massage_response(request, *response);

#ifdef DEBUG
	fprintf(stderr, "RESPONSE:");
	papiAttributeListPrint(stderr, *response, " %d  ", getpid());
	fprintf(stderr, "\n");
#endif

	return (result);
}
Пример #7
0
papi_status_t
printer_status_to_attributes(printer_t *p, char *printer, char *form,
		char *character_set, char *disable_reason, char *reject_reason,
		short status, char *request_id,
		long disable_date, long reject_date)
{
	if (p == NULL)
		return (PAPI_BAD_ARGUMENT);

	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
			"form-ready", form);
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-active-job", request_id);
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-mounted-char-set", character_set);
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-disable-reason", disable_reason);
	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-disable-date", disable_date);
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-reject-reason", reject_reason);
	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-reject-date", reject_date);

	/* add the current system time */
	papiAttributeListAddDatetime(&p->attributes, PAPI_ATTR_REPLACE,
			"printer-current-time", time(NULL));

	/* add the time since last enabled */
	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
			"printer-up-time", time(NULL));

	/* add the status information */
	lpsched_printer_status_to_attributes(&p->attributes, status);

	papiAttributeListAddString(&p->attributes, PAPI_ATTR_EXCL,
			"printer-state-reasons", "none");

	lpsched_printer_defaults(&p->attributes);

	return (PAPI_OK);
}
Пример #8
0
papi_status_t
papiJobStreamClose(papi_service_t handle,
		papi_stream_t stream, papi_job_t *job)
{
	papi_status_t status = PAPI_OK;
	service_t *svc = handle;
	job_stream_t *s = stream;
	job_t *j = NULL;
	char *tmp = NULL, *c;

	if ((svc == NULL) || (stream == NULL) || (job == NULL))
		return (PAPI_BAD_ARGUMENT);

	if ((*job = j = calloc(1, sizeof (*j))) == NULL)
		return (PAPI_TEMPORARY_ERROR);

	close(s->fd);

	lpsched_request_to_job_attributes(s->request, j);

	if (s->meta_data_file != NULL) {
		status = lpsched_commit_job(svc, s->meta_data_file, &tmp);
		if (status != PAPI_OK) {
			unlink(s->meta_data_file);
			return (status);
		}
		if ((c = strrchr(tmp, '-')) != NULL)
			c++;
		papiAttributeListAddInteger(&j->attributes, PAPI_ATTR_REPLACE,
		    "job-id", atoi(c));
		papiAttributeListAddString(&j->attributes, PAPI_ATTR_REPLACE,
		    "job-uri", tmp);
		free(s->meta_data_file);
	}
	freerequest(s->request);
	free(s);

	return (PAPI_OK);
}
Пример #9
0
void
ipp_operations_supported(papi_attribute_t ***list, papi_attribute_t **request)
{
	papi_attribute_t **group = NULL;

	(void) papiAttributeListGetCollection(request, NULL,
				"operations", &group);
	if (group != NULL) {
		int i;

		for (i = 0; handlers[i].name != NULL; i++) {
			char boolean = PAPI_FALSE;
			(void) papiAttributeListGetBoolean(group, NULL,
					handlers[i].name, &boolean);

			if (boolean == PAPI_TRUE)
				(void) papiAttributeListAddInteger(list,
					PAPI_ATTR_APPEND,
					"operations-supported",
					handlers[i].id);
		}
	}
}
Пример #10
0
papi_status_t
papiJobCreate(papi_service_t handle, char *printer,
		papi_attribute_t **job_attributes,
		papi_job_ticket_t *job_ticket, papi_job_t *job)
{
	papi_status_t status;
	service_t *svc = handle;
	job_t *j = NULL;
	REQUEST *request;
	char *request_id = NULL;
	char *c;
	char *tmp = NULL;
	char metadata_file[MAXPATHLEN];

	if ((svc == NULL) || (printer == NULL) || (job == NULL))
		return (PAPI_BAD_ARGUMENT);

	if (job_ticket != NULL)
		return (PAPI_JOB_TICKET_NOT_SUPPORTED);

	if ((*job = j = calloc(1, sizeof (*j))) == NULL)
		return (PAPI_TEMPORARY_ERROR);

	/* 1 for the control file (-0) */
	status = lpsched_alloc_files(svc, 1, &request_id);
	if (status != PAPI_OK)
		return (status);

	/* convert the attributes to an lpsched REQUEST structure */
	request = create_request(svc, (char *)printer,
	    (papi_attribute_t **)job_attributes);
	if (request == NULL)
		return (PAPI_TEMPORARY_ERROR);
	addlist(&request->file_list, DUMMY_FILE);	/* add a dummy file */
	request->actions |= ACT_HOLD;			/* hold the job */

#ifdef LP_USE_PAPI_ATTR
	/*
	 * store the job attributes in the PAPI job attribute file that was
	 * created by lpsched_alloc_files(), the attributes will then pass
	 * through lpsched and be given to the slow-filters and the printer's
	 * interface script to process them
	 */
	snprintf(metadata_file, sizeof (metadata_file), "%s%s-%s",
	    "/var/spool/lp/temp/", request_id, LP_PAPIATTRNAME);
	status = psm_copy_attrsToFile(job_attributes, metadata_file);
	if (status != PAPI_OK) {
		detailed_error(svc, "unable to copy attributes to file: %s: %s",
		    metadata_file, strerror(errno));
		free(request_id);
		return (PAPI_DEVICE_ERROR);
	}
#endif

	/* store the REQUEST on disk */
	snprintf(metadata_file, sizeof (metadata_file), "%s-0", request_id);
	free(request_id);
	if (putrequest(metadata_file, request) < 0) {
		detailed_error(svc, gettext("unable to save request: %s: %s"),
		    metadata_file, strerror(errno));
		return (PAPI_DEVICE_ERROR);
	}

	status = lpsched_commit_job(svc, metadata_file, &tmp);
	if (status != PAPI_OK) {
		unlink(metadata_file);
		return (status);
	}

	lpsched_request_to_job_attributes(request, j);

	if ((c = strrchr(tmp, '-')) != NULL)
		c++;
	papiAttributeListAddInteger(&j->attributes, PAPI_ATTR_REPLACE,
	    "job-id", atoi(c));
	papiAttributeListAddString(&j->attributes, PAPI_ATTR_REPLACE,
	    "job-uri", tmp);

	return (PAPI_OK);
}
Пример #11
0
papi_status_t
papiJobModify(papi_service_t handle, char *printer, int32_t job_id,
		papi_attribute_t **attributes, papi_job_t *job)
{
	papi_status_t status;
	job_t *j = NULL;
	service_t *svc = handle;
	char *file = NULL;
	char *dest;
	REQUEST *r = NULL;
	char lpfile[BUFSIZ];

	if ((svc == NULL) || (printer == NULL) || (job_id < 0) ||
	    (attributes == NULL))
		return (PAPI_BAD_ARGUMENT);

	if ((*job = j = calloc(1, sizeof (*j))) == NULL)
		return (PAPI_TEMPORARY_ERROR);

	dest = printer_name_from_uri_id(printer, job_id);
	status = lpsched_start_change(svc, dest, job_id, &file);
	if (status != PAPI_OK)
		return (status);

	if ((r = getrequest(file)) != NULL) {
		job_attributes_to_lpsched_request(handle, r,
		    (papi_attribute_t **)attributes);
#ifdef LP_USE_PAPI_ATTR
		/*
		 * store the job attributes in the PAPI job attribute file
		 * that was created by the origonal job request. We need to
		 * modify the attributes in the file as per the new attributes
		 */
		snprintf(lpfile, sizeof (lpfile), "%s%d-%s",
		    "/var/spool/lp/temp/", job_id, LP_PAPIATTRNAME);
		status = psm_modifyAttrsFile(attributes, lpfile);
		if (status != PAPI_OK) {
			detailed_error(svc,
			    "unable to modify the attributes file: %s: %s",
			    lpfile, strerror(errno));
			return (PAPI_DEVICE_ERROR);
		}
#endif

		if (putrequest(file, r) < 0) {
			detailed_error(svc,
			    gettext("failed to write job: %s: %s"),
			    file, strerror(errno));
			freerequest(r);
			return (PAPI_DEVICE_ERROR);
		}
	} else {
		detailed_error(svc, gettext("failed to read job: %s: %s"),
		    file, strerror(errno));
		return (PAPI_DEVICE_ERROR);
	}

	status = lpsched_end_change(svc, dest, job_id);
	lpsched_request_to_job_attributes(r, j);

	papiAttributeListAddInteger(&j->attributes, PAPI_ATTR_REPLACE,
	    "job-id", job_id);

	freerequest(r);

	return (status);
}
Пример #12
0
papi_status_t
papiJobSubmit(papi_service_t handle, char *printer,
		papi_attribute_t **job_attributes,
		papi_job_ticket_t *job_ticket,
		char **files, papi_job_t *job)
{
	papi_status_t status;
	service_t *svc = handle;
	job_t *j;
	int file_no;
	char *request_id = NULL;
	REQUEST *request;
	int i;
	char *c;
	char *tmp = NULL;
	char lpfile[BUFSIZ];

	if ((svc == NULL) || (printer == NULL) || (files == NULL) ||
	    (job == NULL))
		return (PAPI_BAD_ARGUMENT);

	if (job_ticket != NULL)
		return (PAPI_OPERATION_NOT_SUPPORTED);

	if (files != NULL)
		for (file_no = 0; files[file_no] != NULL; file_no++)
			if (access(files[file_no], R_OK) < 0) {
				detailed_error(svc,
					gettext("Cannot access file: %s: %s"),
					files[file_no], strerror(errno));
				return (PAPI_BAD_ARGUMENT);
			}

	if ((*job = j = calloc(1, sizeof (*j))) == NULL)
		return (PAPI_TEMPORARY_ERROR);

	/* file_no + 1 for the control file (-0) */
	status = lpsched_alloc_files(svc, file_no + 1, &request_id);
	if (status != PAPI_OK)
		return (status);

	request = create_request(svc, (char *)printer,
				(papi_attribute_t **)job_attributes);

	for (i = 0; files[i] != NULL; i++) {
		papi_status_t status;
		snprintf(lpfile, sizeof (lpfile), "%s%s-%d",
			"/var/spool/lp/temp/", request_id, i+1);
		status = copy_file(files[i], lpfile);
		if (status != PAPI_OK) {
			detailed_error(svc,
				gettext("unable to copy: %s -> %s: %s"),
				files[i], lpfile, strerror(errno));
				freerequest(request);
			return (PAPI_DEVICE_ERROR);
		}
		addlist(&(request->file_list), lpfile);
	}

#ifdef LP_USE_PAPI_ATTR
	/*
	 * store the job attributes in the PAPI job attribute file that was
	 * created by lpsched_alloc_files(), the attributes will then pass
	 * through lpsched and be given to the slow-filters and the printer's
	 * interface script to process them
	 */
	snprintf(lpfile, sizeof (lpfile), "%s%s-%s",
		"/var/spool/lp/temp/", request_id, LP_PAPIATTRNAME);
	status = psm_copy_attrsToFile(job_attributes, lpfile);
	if (status != PAPI_OK) {
		detailed_error(svc, "unable to copy attributes to file: %s: %s",
				lpfile, strerror(errno));
		return (PAPI_DEVICE_ERROR);
	}
#endif

	/* store the meta-data file */
	snprintf(lpfile, sizeof (lpfile), "%s-0", request_id);
	if (putrequest(lpfile, request) < 0) {
		detailed_error(svc, gettext("unable to save request: %s: %s"),
			lpfile, strerror(errno));
		freerequest(request);
		return (PAPI_DEVICE_ERROR);
	}

	status = lpsched_commit_job(svc, lpfile, &tmp);
	if (status != PAPI_OK) {
		unlink(lpfile);
		freerequest(request);
		return (status);
	}

	lpsched_request_to_job_attributes(request, j);
	freerequest(request);

	if ((c = strrchr(tmp, '-')) != NULL)
		c++;
	papiAttributeListAddInteger(&j->attributes, PAPI_ATTR_REPLACE,
			"job-id", atoi(c));
	papiAttributeListAddString(&j->attributes, PAPI_ATTR_REPLACE,
			"job-uri", tmp);

	return (PAPI_OK);
}
Пример #13
0
static int
ipp_handler(request_rec *r)
{
	papi_attribute_t **request = NULL, **response = NULL;
	IPPListenerConfig *config;
	papi_status_t status;
	int ret;

	/* Really, IPP is all POST requests */
	if (r->method_number != M_POST)
		return (DECLINED);

#ifndef APACHE2
	/*
	 * An IPP request must have a MIME type of "application/ipp"
	 * (RFC-2910, Section 4, page 19).  If it doesn't match this
	 * MIME type, we should decline the request and let someone else
	 * try and handle it.
	 */
	if (r->headers_in != NULL) {
		char *mime_type = (char *)ap_table_get(r->headers_in,
							"Content-Type");

		if ((mime_type == NULL) ||
		    (strcasecmp(mime_type, "application/ipp") != 0))
			return (DECLINED);
	}
#endif
	/* CHUNKED_DECHUNK might not work right for IPP? */
	if ((ret = ap_setup_client_block(r, REQUEST_CHUNKED_DECHUNK)) != OK)
		return (ret);

	if (!ap_should_client_block(r))
		return (HTTP_INTERNAL_SERVER_ERROR);

#ifndef APACHE2
	ap_soft_timeout("ipp_module: read/reply request ", r);
#endif
	/* read the IPP request off the network */
	status = ipp_read_message(read_data, r, &request, IPP_TYPE_REQUEST);

	if (status != PAPI_OK)
		_log_rerror(APLOG_MARK, APLOG_ERR, r,
			"read failed: %s\n", papiStatusString(status));
#ifdef DEBUG
	papiAttributeListPrint(stderr, request, "request (%d)  ", getpid());
#endif

	(void) papiAttributeListAddString(&request, PAPI_ATTR_EXCL,
		"originating-host", (char *)
#ifdef APACHE2
		ap_get_remote_host
			(r->connection, r->per_dir_config, REMOTE_NAME, NULL));
#else
		ap_get_remote_host
			(r->connection, r->per_dir_config, REMOTE_NAME));
#endif

	(void) papiAttributeListAddInteger(&request, PAPI_ATTR_EXCL,
				"uri-port", ap_get_server_port(r));
	if (r->headers_in != NULL) {
		char *host = (char *)ap_table_get(r->headers_in, "Host");

		if ((host == NULL) || (host[0] == '\0'))
			host = (char *)ap_get_server_name(r);

		(void) papiAttributeListAddString(&request, PAPI_ATTR_EXCL,
				"uri-host", host);
	}
	(void) papiAttributeListAddString(&request, PAPI_ATTR_EXCL,
				"uri-path", r->uri);

	config = ap_get_module_config(r->per_dir_config, &ipp_module);
	if (config != NULL) {
		(void) papiAttributeListAddInteger(&request, PAPI_ATTR_EXCL,
				"conformance", config->conformance);
		(void) papiAttributeListAddCollection(&request, PAPI_ATTR_EXCL,
				"operations", config->operations);
		if (config->default_user != NULL)
			(void) papiAttributeListAddString(&request,
						PAPI_ATTR_EXCL, "default-user",
						config->default_user);
		if (config->default_svc != NULL)
			(void) papiAttributeListAddString(&request,
					PAPI_ATTR_EXCL, "default-service",
					config->default_svc);
	}

	/*
	 * For Trusted Solaris, pass the fd number of the socket connection
	 * to the backend so the it can be forwarded to the backend print
	 * service to retrieve the sensativity label off of a multi-level
	 * port.
	 */
	(void) papiAttributeListAddInteger(&request, PAPI_ATTR_EXCL,
			"peer-socket", ap_bfileno(r->connection->client, B_RD));

	/* process the request */
	status = ipp_process_request(request, &response, read_data, r);
	if (status != PAPI_OK) {
		errno = 0;
		_log_rerror(APLOG_MARK, APLOG_ERR, r,
			"request failed: %s\n", papiStatusString(status));
		discard_data(r);
	}
#ifdef DEBUG
	fprintf(stderr, "processing result: %s\n", papiStatusString(status));
	papiAttributeListPrint(stderr, response, "response (%d)  ", getpid());
#endif

	/*
	 * If the client is using chunking and we have not yet received the
	 * final "0" sized chunk, we need to discard any data that may
	 * remain in the post request.
	 */
	if ((r->read_chunked != 0) &&
	    (ap_table_get(r->headers_in, "Content-Length") == NULL))
		discard_data(r);

	/* write an IPP response back to the network */
	r->content_type = "application/ipp";

#ifndef	APACHE2
	ap_send_http_header(r);
#endif

	status = ipp_write_message(write_data, r, response);
	if (status != PAPI_OK)
		_log_rerror(APLOG_MARK, APLOG_ERR, r,
			"write failed: %s\n", papiStatusString(status));
#ifdef DEBUG
	fprintf(stderr, "write result: %s\n", papiStatusString(status));
	fflush(stderr);
#endif

	papiAttributeListFree(request);
	papiAttributeListFree(response);

#ifndef APACHE2
	ap_kill_timeout(r);
	if (ap_rflush(r) < 0)
		_log_rerror(APLOG_MARK, APLOG_ERR, r,
			"flush failed, response may not have been sent");
#endif

	return (OK);
}
static gint
gp_transport_papi_construct (GnomePrintTransport *gp_transport)
{
	GPTransportPAPI *transport;
	char *value;
	long valint;
	papi_status_t status;
	papi_service_t service = NULL;
	papi_attribute_t **attributes = NULL;

	transport = GP_TRANSPORT_PAPI (gp_transport);

	/* gnome_print_config_dump (gp_transport->config); */

	/* FIXME: this used to be Settings.Transport.Backend.Printer */
	value = (char *)gnome_print_config_get (gp_transport->config,
		(unsigned char *)"Printer");
	if (!value) {
		g_warning ("Could not find \"Settings.Transport.Backend.Printer\"");
		return GNOME_PRINT_ERROR_UNKNOWN;
	}

	transport->printer = value;

	status = papiServiceCreate (&service, transport->printer, NULL, NULL,
		NULL, PAPI_ENCRYPT_NEVER, NULL);
	if (status != PAPI_OK) {
		g_warning ("Could not create PAPI service");
		return GNOME_PRINT_ERROR_UNKNOWN;
	}
	transport->service = service;

	value = (char *)gnome_print_config_get (gp_transport->config,
		(unsigned char *)GNOME_PRINT_KEY_NUM_COPIES);
	errno = 0;
	valint = strtol ((char *)value, NULL, 10);
	if (errno == 0)
		papiAttributeListAddInteger (&attributes, PAPI_ATTR_EXCL,
			"copies", valint);
	else
		papiAttributeListAddInteger (&attributes, PAPI_ATTR_EXCL,
			"copies", 1);
	g_free (value);

	/*
	 * We really ought to pull this value from somewhere.  It probably will
	 * be "application/postscript" most of the time, but at least with
	 * "application/octet-stream" (raw data), the queue should do the right
	 * thing.
	 */
	papiAttributeListAddString (&attributes, PAPI_ATTR_EXCL,
		"document-format", "application/octet-stream");
	/*
	 * Always print burst pages; GNOME doesn't have an attribute to query
	 * for it.
	 */
	papiAttributeListAddString (&attributes, PAPI_ATTR_EXCL,
		"job-sheets", "standard");

	/*
	 * How does PaperSource translate into an IPP attribute?  I assume that
	 * this is the input tray, but it's not in gnome-print-config.h.  This
	 * is a holdover from the CUPS module, which uses InputSlot.
	 */
	/*
	value = gnome_print_config_get (gp_transport->config,
		"Settings.Output.PaperSource");
	papiAttributeListAddString (&attributes, PAPI_ATTR_EXCL, "???", value);
	g_free (value);
	*/

	/*
	 * lpsched can't deal with bad media values; printing to a remote
	 * printer via lpd will simply fail.
	 */
	/*
	value = (char *)gnome_print_config_get (gp_transport->config,
		(unsigned char *)GNOME_PRINT_KEY_PAPER_SIZE);
	papiAttributeListAddString (&attributes, PAPI_ATTR_EXCL,
		"media", value);
	g_free (value);
	*/

	value = (char *)gnome_print_config_get (gp_transport->config,
		(unsigned char *)GNOME_PRINT_KEY_DOCUMENT_NAME);
	if (value != NULL && value[0] != '\0')
		papiAttributeListAddString (&attributes, PAPI_ATTR_EXCL,
			"job-name", value);
	g_free (value);

	transport->attributes = attributes;

	return GNOME_PRINT_OK;
}
Пример #15
0
papi_status_t
papiJobSubmitByReference(papi_service_t handle, char *printer,
		papi_attribute_t **job_attributes,
		papi_job_ticket_t *job_ticket,
		char **files, papi_job_t *job)
{
	service_t *svc = handle;
	struct stat statbuf;
	job_t *j;
	int file_no;
	short status;
	char *request_id = NULL;
	REQUEST *request;
	char *c;
	char *tmp = NULL;
	char lpfile[BUFSIZ];
	char **file_list = NULL;

	if ((svc == NULL) || (printer == NULL) || (files == NULL) ||
	    (job == NULL))
		return (PAPI_BAD_ARGUMENT);

	if (job_ticket != NULL)
		return (PAPI_OPERATION_NOT_SUPPORTED);

	if (files != NULL)
		for (file_no = 0; files[file_no] != NULL; file_no++) {
			if (access(files[file_no], R_OK) < 0) {
				detailed_error(svc,
				    gettext("Cannot access file: %s: %s"),
				    files[file_no], strerror(errno));
				return (PAPI_DOCUMENT_ACCESS_ERROR);
			}
			if (stat(files[file_no], &statbuf) < 0) {
				detailed_error(svc,
				    gettext("Cannot access file: %s: %s"),
				    files[file_no], strerror(errno));
				return (PAPI_DOCUMENT_ACCESS_ERROR);
			}
			if (statbuf.st_size == 0) {
				detailed_error(svc,
				    gettext("Zero byte (empty) file: %s"),
				    files[file_no]);
				return (PAPI_BAD_ARGUMENT);
			}

			if (files[file_no][0] != '/') {
				char path[MAXPATHLEN];

				if (getcwd(path, sizeof (path)) == NULL) {
					detailed_error(svc, gettext(
					    "getcwd for file: %s: %s"),
					    files[file_no],
					    strerror(errno));
					return (PAPI_DOCUMENT_ACCESS_ERROR);
				}
				strlcat(path, "/", sizeof (path));
				if (strlcat(path, files[file_no], sizeof (path))
				    >= sizeof (path)) {
					detailed_error(svc, gettext(
					    "pathname too long: %s"),
					    files[file_no]);
					return (PAPI_DOCUMENT_ACCESS_ERROR);
				}
				addlist(&file_list, path);
			} else
				addlist(&file_list, (char *)files[file_no]);
		}

	if ((*job = j = calloc(1, sizeof (*j))) == NULL)
		return (PAPI_TEMPORARY_ERROR);

	/* 1 for the control file (-0) */
	status = lpsched_alloc_files(svc, 1, &request_id);
	if (status != PAPI_OK)
		return (status);

	request = create_request(svc, (char *)printer,
	    (papi_attribute_t **)job_attributes);
	request->file_list = file_list;

#ifdef LP_USE_PAPI_ATTR
	/*
	 * store the job attributes in the PAPI job attribute file that was
	 * created by lpsched_alloc_files(), the attributes will then pass
	 * through lpsched and be given to the slow-filters and the printer's
	 * interface script to process them
	 */
	snprintf(lpfile, sizeof (lpfile), "%s%s-%s",
	    "/var/spool/lp/temp/", request_id, LP_PAPIATTRNAME);
	status = psm_copy_attrsToFile(job_attributes, lpfile);
	if (status != PAPI_OK) {
		detailed_error(svc, "unable to copy attributes to file: %s: %s",
		    lpfile, strerror(errno));
		return (PAPI_DEVICE_ERROR);
	}
#endif

	/* store the meta-data file */
	snprintf(lpfile, sizeof (lpfile), "%s-0", request_id);
	if (putrequest(lpfile, request) < 0) {
		detailed_error(svc, gettext("unable to save request: %s: %s"),
		    lpfile, strerror(errno));
		freerequest(request);
		return (PAPI_DEVICE_ERROR);
	}

	status = lpsched_commit_job(svc, lpfile, &tmp);
	if (status != PAPI_OK) {
		unlink(lpfile);
		freerequest(request);
		return (status);
	}

	lpsched_request_to_job_attributes(request, j);

	freerequest(request);

	if ((c = strrchr(tmp, '-')) != NULL)
		c++;
	papiAttributeListAddInteger(&j->attributes, PAPI_ATTR_REPLACE,
	    "job-id", atoi(c));
	papiAttributeListAddString(&j->attributes, PAPI_ATTR_REPLACE,
	    "job-uri", tmp);

	return (PAPI_OK);
}
Пример #16
0
int
main(int ac, char *av[])
{
	papi_status_t status;
	papi_service_t svc = NULL;
	papi_attribute_t **list = NULL;
	papi_encryption_t encryption = PAPI_ENCRYPT_NEVER;
	papi_job_t job = NULL;
	char prefetch[3];
	int prefetch_len = sizeof (prefetch);
	char *printer = NULL;
	char b = PAPI_TRUE;
	int copy = 0;
	int silent = 0;
	int dump = 0;
	int validate = 0;
	int modify = -1;
	int c;
	uid_t ruid;
	struct passwd *pw;

	(void) setlocale(LC_ALL, "");
	(void) textdomain("SUNW_OST_OSCMD");

	ruid = getuid();
	if ((pw = getpwuid(ruid)) != NULL)
		(void) initgroups(pw->pw_name, pw->pw_gid);
	(void) setuid(ruid);


	while ((c = getopt(ac, av, "DEH:P:S:T:cd:f:i:mn:o:pq:rst:Vwy:")) != EOF)
		switch (c) {
		case 'H':	/* handling */
			if (strcasecmp(optarg, "hold") == 0)
				papiAttributeListAddString(&list,
				    PAPI_ATTR_EXCL,
				    "job-hold-until", "indefinite");
			else if (strcasecmp(optarg, "immediate") == 0)
				papiAttributeListAddString(&list,
				    PAPI_ATTR_EXCL,
				    "job-hold-until", "no-hold");
			else
				papiAttributeListAddString(&list,
				    PAPI_ATTR_EXCL,
				    "job-hold-until", optarg);
			break;
		case 'P': {	/* page list */
			char buf[BUFSIZ];

			snprintf(buf, sizeof (buf), "page-ranges=%s", optarg);
			papiAttributeListFromString(&list,
			    PAPI_ATTR_EXCL, buf);
			}
			break;
		case 'S':	/* charset */
			papiAttributeListAddString(&list, PAPI_ATTR_EXCL,
			    "lp-charset", optarg);
			break;
		case 'T':	/* type */
			papiAttributeListAddString(&list, PAPI_ATTR_EXCL,
			    "document-format",
			    lp_type_to_mime_type(optarg));
			break;
		case 'D':	/* dump */
			dump = 1;
			break;
		case 'c':	/* copy */
			copy = 1;
			break;
		case 'd':	/* destination */
			printer = optarg;
			break;
		case 'f':	/* form */
			papiAttributeListAddString(&list, PAPI_ATTR_EXCL,
			    "form", optarg);
			break;
		case 'i':	/* modify job */
			if ((get_printer_id(optarg, &printer, &modify) < 0) ||
			    (modify < 0)) {
				fprintf(stderr,
				    gettext("invalid request id: %s\n"),
				    optarg);
				exit(1);
			}
			break;
		case 'm':	/* mail when complete */
			papiAttributeListAddBoolean(&list, PAPI_ATTR_EXCL,
			    "rfc-1179-mail", 1);
			break;
		case 'n':	/* copies */
			papiAttributeListAddInteger(&list, PAPI_ATTR_EXCL,
			    "copies", atoi(optarg));
			break;
		case 'o':	/* lp "options" */
			papiAttributeListFromString(&list,
			    PAPI_ATTR_REPLACE, optarg);
			break;
		case 'p':	/* Solaris - notification */
			papiAttributeListAddBoolean(&list, PAPI_ATTR_EXCL,
			    "rfc-1179-mail", 1);
			break;
		case 'q': {	/* priority */
			int i = atoi(optarg);

			i = 100 - (i * 2.5);
			if ((i < 1) || (i > 100)) {
				fprintf(stderr, gettext("UX:lp: "));
				fprintf(stderr, gettext("ERROR: "));
				fprintf(stderr, gettext("Bad priority"
				    " value \"%s\"."), optarg);
				fprintf(stderr, gettext("\n      "));
				fprintf(stderr, gettext("TO FIX"));
				fprintf(stderr, gettext(": "));
				fprintf(stderr, gettext("Use an integer value"
				    " from 0 to 39."));
				fprintf(stderr, gettext("\n"));
				exit(1);
			}
			papiAttributeListAddInteger(&list, PAPI_ATTR_EXCL,
			    "job-priority", i);
			}
			break;
		case 'r':	/* "raw" mode */
			papiAttributeListAddString(&list, PAPI_ATTR_EXCL,
			    "document-format",
			    "application/octet-stream");
			papiAttributeListAddString(&list, PAPI_ATTR_APPEND,
			    "stty", "raw");
			break;
		case 's':	/* suppress message */
			silent = 1;
			break;
		case 't':	/* title */
			papiAttributeListAddString(&list, PAPI_ATTR_EXCL,
			    "job-name", optarg);
			break;
		case 'V':	/* validate */
			validate = 1;
			break;
		case 'w':
			papiAttributeListAddBoolean(&list, PAPI_ATTR_EXCL,
			    "rfc-1179-mail", 1);
			break;
		case 'y':	/* lp "modes" */
			papiAttributeListAddString(&list, PAPI_ATTR_APPEND,
			    "lp-modes", optarg);
			break;
		case 'E':
			encryption = PAPI_ENCRYPT_REQUIRED;
			break;
		default:
			usage(av[0]);
		}

	/* convert "banner", "nobanner" to "job-sheet" */
	if (papiAttributeListGetBoolean(list, NULL, "banner", &b) == PAPI_OK) {
		(void) papiAttributeListDelete(&list, "banner");
		if (b == PAPI_FALSE)
			papiAttributeListAddString(&list, PAPI_ATTR_EXCL,
			    "job-sheets", "none");
	}

	if ((printer == NULL) &&
	    ((printer = getenv("PRINTER")) == NULL) &&
	    ((printer = getenv("LPDEST")) == NULL))
		printer = DEFAULT_DEST;

	if (((optind + 1) == ac) && (strcmp(av[optind], "-") == 0))
		optind = ac;

	if (modify == -1) {
		char *document_format = "text/plain";

		if (optind != ac) {
			/* get the mime type of the file data */
#ifdef MAGIC_MIME
			magic_t ms = NULL;

			if ((ms = magic_open(MAGIC_MIME)) != NULL) {
				document_format = magic_file(ms, av[optind]);
				magic_close(ms);
			}
#else
			if (is_postscript(av[optind]) == 1)
				document_format = "application/postscript";
#endif
		} else {
			if (is_postscript_stream(0, prefetch, &prefetch_len)
			    == 1)
				document_format = "application/postscript";
		}

		papiAttributeListAddInteger(&list, PAPI_ATTR_EXCL, "copies", 1);
		papiAttributeListAddString(&list, PAPI_ATTR_EXCL,
		    "document-format", document_format);
		papiAttributeListAddString(&list, PAPI_ATTR_EXCL,
		    "job-sheets", "standard");
	}

	status = papiServiceCreate(&svc, printer, NULL, NULL, cli_auth_callback,
	    encryption, NULL);
	if (status != PAPI_OK) {
		fprintf(stderr, gettext(
		    "Failed to contact service for %s: %s\n"), printer,
		    verbose_papi_message(svc, status));
		exit(1);
	}

	if (dump != 0) {
		printf("requesting attributes:\n");
		papiAttributeListPrint(stdout, list, "\t");
		printf("\n");
	}

	if (modify != -1)
		status = papiJobModify(svc, printer, modify, list, &job);
	else if (optind == ac)	/* no file list, use stdin */
		status = jobSubmitSTDIN(svc, printer, prefetch, prefetch_len,
		    list, &job);
	else if (validate == 1)	/* validate the request can be processed */
		status = papiJobValidate(svc, printer, list,
		    NULL, &av[optind], &job);
	else if (copy == 0)	/* reference the files in the job, default */
		status = papiJobSubmitByReference(svc, printer, list,
		    NULL, &av[optind], &job);
	else			/* copy the files before return, -c */
		status = papiJobSubmit(svc, printer, list,
		    NULL, &av[optind], &job);

	papiAttributeListFree(list);

	if (status != PAPI_OK) {
		fprintf(stderr, gettext("%s: %s\n"), printer,
		    verbose_papi_message(svc, status));
		papiJobFree(job);
		papiServiceDestroy(svc);
		exit(1);
	}

	if (((silent == 0) || (dump != 0)) &&
	    ((list = papiJobGetAttributeList(job)) != NULL)) {
		int32_t id = -1;

		if (printer == NULL)
			papiAttributeListGetString(list, NULL,
			    "printer-name", &printer);

		papiAttributeListGetInteger(list, NULL,
		    "job-id-requested", &id);
		if (id == -1) {
			papiAttributeListGetInteger(list, NULL, "job-id", &id);
		}

		printf(gettext("request id is %s-%d "), printer, id);
		if (ac != optind)
			printf("(%d file(s))\n", ac - optind);
		else
			printf("(standard input)\n");

		if (dump != 0) {
			printf("job attributes:\n");
			papiAttributeListPrint(stdout, list, "\t");
			printf("\n");
		}
	}

	papiJobFree(job);
	papiServiceDestroy(svc);

	return (0);
}
Пример #17
0
papi_status_t
lpsched_printer_configuration_to_attributes(service_t *svc, printer_t *p,
	char *dest)
{
	PRINTER *tmp;
	char buf[BUFSIZ+1];
	struct utsname sysname;
	char **allowed = NULL, **denied = NULL;

	if ((svc == NULL) || (p == NULL) || (dest == NULL))
		return (PAPI_BAD_ARGUMENT);

	/* get the configuration DB data */
	if ((tmp = getprinter(dest)) == NULL) {
		detailed_error(svc,
			gettext("unable to read configuration data"));
		return (PAPI_DEVICE_ERROR);
	}

	/* name */
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
				"printer-name", tmp->name);
	if (tmp->name != NULL) {
		char uri[BUFSIZ];

		snprintf(uri, sizeof (uri), "lpsched://localhost/printers/%s",
				tmp->name);
		papiAttributeListAddString(&p->attributes, PAPI_ATTR_REPLACE,
				"printer-uri-supported", uri);
	}

	/* banner */
	if ((tmp->banner & BAN_OPTIONAL) == BAN_OPTIONAL)
		papiAttributeListAddString(&p->attributes, PAPI_ATTR_APPEND,
				"job-sheets-supported", "optional");
	else if (tmp->banner & BAN_NEVER)
		papiAttributeListAddString(&p->attributes, PAPI_ATTR_APPEND,
				"job-sheets-supported", "none");
	else if (tmp->banner & BAN_ALWAYS)
		papiAttributeListAddString(&p->attributes, PAPI_ATTR_APPEND,
				"job-sheets-supported", "standard");

	/* input_types */
	if (tmp->input_types != NULL) {
		int i;

		for (i = 0; tmp->input_types[i] != NULL; i++)
			papiAttributeListAddLPString(&p->attributes,
				PAPI_ATTR_APPEND, "document-format-supported",
				lp_type_to_mime_type(tmp->input_types[i]));
	}

	/* description */
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
			"printer-info", tmp->description);

	/* add lpsched specific attributes */
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
				"device-uri", tmp->device);
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-dial-info", tmp->dial_info);
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-fault-recovery", tmp->fault_rec);
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-interface-script", tmp->interface);
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-data-rate", tmp->speed);
	papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-stty", tmp->stty);
	papiAttributeListAddBoolean(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-login-term", tmp->login);
	papiAttributeListAddBoolean(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-daisy", tmp->daisy);
	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-charsets", tmp->char_sets);
#ifdef CAN_DO_MODULES
	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-modules", tmp->modules);
#endif /* CAN_DO_MODULES */
	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-options", tmp->options);
	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-printer-type", tmp->printer_types);
	if (tmp->fault_alert.shcmd != NULL) {
		papiAttributeListAddLPString(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-fault-alert-command",
				tmp->fault_alert.shcmd);
		papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-fault-alert-threshold",
				tmp->fault_alert.Q);
		papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-fault-alert-interval",
				tmp->fault_alert.W);
	}
	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-cpi-value", tmp->cpi.val);
	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-cpi-unit", tmp->cpi.sc);
	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-lpi-value", tmp->lpi.val);
	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-lpi-unit", tmp->lpi.sc);
	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-plen-value", tmp->plen.val);
	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-plen-unit", tmp->plen.sc);
	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-pwid-value", tmp->pwid.val);
	papiAttributeListAddInteger(&p->attributes, PAPI_ATTR_REPLACE,
				"lpsched-pwid-unit", tmp->pwid.sc);

	/* allow/deny list */
	load_userprinter_access(dest, &allowed, &denied);
	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
				"requesting-user-name-allowed", allowed);
	papiAttributeListAddLPStrings(&p->attributes, PAPI_ATTR_REPLACE,
				"requesting-user-name-denied", denied);

#ifdef LP_USE_PAPI_ATTR
	if (tmp->ppd != NULL) {
		int fd;
		struct stat sbuf;

		/* construct the two URIs for the printer's PPD file */
		if (uname(&sysname) < 0) {
			/* failed to get systen name */
			sysname.nodename[0] = 0;
		}
		snprintf(buf, sizeof (buf), "file://%s%s/ppd/%s.ppd",
			sysname.nodename, ETCDIR, tmp->name);
		papiAttributeListAddString(&p->attributes, PAPI_ATTR_REPLACE,
			"ppd-file-uri", buf);

		snprintf(buf, sizeof (buf), "file://%s%s",
			sysname.nodename, tmp->ppd);
		papiAttributeListAddString(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-printer-configure-ppd-uri", buf);
		papiAttributeListAddString(&p->attributes, PAPI_ATTR_REPLACE,
			"lpsched-ppd-source-path", tmp->ppd);

		snprintf(buf, sizeof (buf), "%s/ppd/%s.ppd", ETCDIR, tmp->name);

		/*
		 * We don't return error on any of the error conditions, we just
		 * silently return without adding the attribute.
		 */
		PPDFileToAttributesList(&p->attributes, buf);
	}
#endif

	freeprinter(tmp);

	return (PAPI_OK);
}