int
pmsprobe(device_t parent, cfdata_t match, void *aux)
{
struct pckbport_attach_args *pa = aux;
u_char cmd[1], resp[2];
int res;
if (pa->pa_slot != PCKBPORT_AUX_SLOT)
return 0;
/* Flush any garbage. */
pckbport_flush(pa->pa_tag, pa->pa_slot);
/* reset the device */
cmd[0] = PMS_RESET;
res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 2, resp, 1);
if (res) {
aprint_debug("pmsprobe: reset error %d\n", res);
return 0;
}
if (resp[0] != PMS_RSTDONE) {
printf("pmsprobe: reset response 0x%x\n", resp[0]);
return 0;
}
/* get type number (0 = mouse) */
if (resp[1] != 0) {
aprint_debug("pmsprobe: type 0x%x\n", resp[1]);
return 0;
}
return 10;
}
/*
* these are both bad jokes
*/
int
pckbdprobe(struct device *parent, struct cfdata *cf, void *aux)
{
struct pckbport_attach_args *pa = aux;
int res;
u_char cmd[1], resp[1];
/*
* XXX There are rumours that a keyboard can be connected
* to the aux port as well. For me, this didn't work.
* For further experiments, allow it if explicitly
* wired in the config file.
*/
if ((pa->pa_slot != PCKBPORT_KBD_SLOT) &&
(cf->cf_loc[PCKBPORTCF_SLOT] == PCKBPORTCF_SLOT_DEFAULT))
return 0;
/* Flush any garbage. */
pckbport_flush(pa->pa_tag, pa->pa_slot);
/* Reset the keyboard. */
cmd[0] = KBC_RESET;
res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 1, resp, 1);
if (res) {
#ifdef DEBUG
printf("pckbdprobe: reset error %d\n", res);
#endif
/*
* There is probably no keyboard connected.
* Let the probe succeed if the keyboard is used
* as console input - it can be connected later.
*/
return pckbd_is_console(pa->pa_tag, pa->pa_slot) ? 1 : 0;
}
if (resp[0] != KBR_RSTDONE) {
printf("pckbdprobe: reset response 0x%x\n", resp[0]);
return 0;
}
/*
* Some keyboards seem to leave a second ack byte after the reset.
* This is kind of stupid, but we account for them anyway by just
* flushing the buffer.
*/
pckbport_flush(pa->pa_tag, pa->pa_slot);
if (pckbd_set_xtscancode(pa->pa_tag, pa->pa_slot))
return 0;
return 2;
}
int
pckbd_enable(void *v, int on)
{
struct pckbd_softc *sc = v;
int res;
u_char cmd[1];
if (on) {
if (sc->sc_enabled) {
#ifdef DIAGNOSTIC
printf("pckbd_enable: bad enable\n");
#endif
return EBUSY;
}
pckbport_slot_enable(sc->id->t_kbctag, sc->id->t_kbcslot, 1);
cmd[0] = KBC_ENABLE;
res = pckbport_poll_cmd(sc->id->t_kbctag, sc->id->t_kbcslot,
cmd, 1, 0, NULL, 0);
if (res) {
printf("pckbd_enable: command error\n");
return (res);
}
res = pckbd_set_xtscancode(sc->id->t_kbctag,
sc->id->t_kbcslot);
if (res)
return res;
sc->sc_enabled = 1;
} else {
if (sc->id->t_isconsole)
return EBUSY;
cmd[0] = KBC_DISABLE;
res = pckbport_enqueue_cmd(sc->id->t_kbctag, sc->id->t_kbcslot,
cmd, 1, 0, 1, 0);
if (res) {
printf("pckbd_disable: command error\n");
return res;
}
pckbport_slot_enable(sc->id->t_kbctag, sc->id->t_kbcslot, 0);
sc->sc_enabled = 0;
}
return 0;
}
void
pmsattach(device_t parent, device_t self, void *aux)
{
struct pms_softc *sc = device_private(self);
struct pckbport_attach_args *pa = aux;
struct wsmousedev_attach_args a;
u_char cmd[2], resp[2];
int res;
sc->sc_dev = self;
sc->sc_kbctag = pa->pa_tag;
sc->sc_kbcslot = pa->pa_slot;
aprint_naive("\n");
aprint_normal("\n");
/* Flush any garbage. */
pckbport_flush(pa->pa_tag, pa->pa_slot);
/* reset the device */
cmd[0] = PMS_RESET;
res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 2, resp, 1);
if (res || resp[0] != PMS_RSTDONE || resp[1] != 0) {
aprint_debug("pmsattach: reset error\n");
return;
}
sc->inputstate = 0;
sc->buttons = 0;
sc->protocol = PMS_UNKNOWN;
#ifdef PMS_SYNAPTICS_TOUCHPAD
/* Probe for synaptics touchpad. */
if (pms_synaptics_probe_init(sc) == 0) {
sc->protocol = PMS_SYNAPTICS;
} else
#endif
#ifdef PMS_ELANTECH_TOUCHPAD
if (pms_elantech_probe_init(sc) == 0) {
sc->protocol = PMS_ELANTECH;
} else
#endif
/* Install generic handler. */
pckbport_set_inputhandler(sc->sc_kbctag, sc->sc_kbcslot,
pmsinput, sc, device_xname(sc->sc_dev));
a.accessops = &pms_accessops;
a.accesscookie = sc;
/*
* Attach the wsmouse, saving a handle to it.
* Note that we don't need to check this pointer against NULL
* here or in pmsintr, because if this fails pms_enable() will
* never be called, so pmsinput() will never be called.
*/
sc->sc_wsmousedev = config_found_ia(self, "wsmousedev", &a, wsmousedevprint);
/* no interrupts until enabled */
cmd[0] = PMS_DEV_DISABLE;
res = pckbport_poll_cmd(pa->pa_tag, pa->pa_slot, cmd, 1, 0, 0, 0);
if (res)
aprint_error("pmsattach: disable error\n");
pckbport_slot_enable(sc->sc_kbctag, sc->sc_kbcslot, 0);
kthread_create(PRI_NONE, 0, NULL, pms_reset_thread, sc,
&sc->sc_event_thread, device_xname(sc->sc_dev));
#ifndef PMS_DISABLE_POWERHOOK
sc->sc_suspended = 0;
#endif
if (!pmf_device_register(self, pms_suspend, pms_resume))
aprint_error_dev(self, "couldn't establish power handler\n");
}
