//
// receive data.
//
pj_ssize_t recv(void *buf, pj_size_t len, int flag = 0)
{
pj_ssize_t bytes = len;
if (pj_sock_recv(sock_, buf, &bytes, flag) != PJ_SUCCESS)
return -1;
return bytes;
}
/*
* pj_ioqueue_recv()
*
* Start asynchronous recv() from the socket.
*/
PJ_DEF(pj_status_t) pj_ioqueue_recv( pj_ioqueue_key_t *key,
pj_ioqueue_op_key_t *op_key,
void *buffer,
pj_ssize_t *length,
unsigned flags )
{
struct read_operation *read_op;
PJ_ASSERT_RETURN(key && op_key && buffer && length, PJ_EINVAL);
PJ_CHECK_STACK();
/* Check if key is closing (need to do this first before accessing
* other variables, since they might have been destroyed. See ticket
* #469).
*/
if (IS_CLOSING(key))
return PJ_ECANCELLED;
read_op = (struct read_operation*)op_key;
read_op->op = PJ_IOQUEUE_OP_NONE;
/* Try to see if there's data immediately available.
*/
if ((flags & PJ_IOQUEUE_ALWAYS_ASYNC) == 0) {
pj_status_t status;
pj_ssize_t size;
size = *length;
status = pj_sock_recv(key->fd, buffer, &size, flags);
if (status == PJ_SUCCESS) {
/* Yes! Data is available! */
*length = size;
return PJ_SUCCESS;
} else {
/* If error is not EWOULDBLOCK (or EAGAIN on Linux), report
* the error to caller.
*/
if (status != PJ_STATUS_FROM_OS(PJ_BLOCKING_ERROR_VAL))
return status;
}
}
flags &= ~(PJ_IOQUEUE_ALWAYS_ASYNC);
/*
* No data is immediately available.
* Must schedule asynchronous operation to the ioqueue.
*/
read_op->op = PJ_IOQUEUE_OP_RECV;
read_op->buf = buffer;
read_op->size = *length;
read_op->flags = flags;
pj_mutex_lock(key->mutex);
pj_list_insert_before(&key->read_list, read_op);
ioqueue_add_to_set(key->ioqueue, key, READABLE_EVENT);
pj_mutex_unlock(key->mutex);
return PJ_EPENDING;
}
int main() {
pj_sock_t sock;
pj_sockaddr_in to_addr;
char *s = "Cong hoa xa hoi chu nghia VietNam";
char buffer[100];
pj_ssize_t len;
struct timeval tv_begin, tv_end, tv_diff;
pj_log_set_level(3);
CHECK(__FILE__, pj_init());
pj_bzero(buffer, sizeof(buffer));
CHECK_R( __FILE__, pj_sock_socket(PJ_AF_INET, PJ_SOCK_DGRAM, 0, &sock) );
//udp_socket(12345, &sock);
setup_addr_with_host_and_port(&to_addr, "127.0.0.1", 33333);
len = strlen(s);
gettimeofday(&tv_begin, NULL);
pj_sock_sendto(sock, s, &len, 0, &to_addr, sizeof(to_addr));
PJ_LOG(3, (__FILE__, "Sent: %s", s));
len = 100;
pj_sock_recv(sock, buffer, &len, 0);
gettimeofday(&tv_end, NULL);
int diff = timeval_subtract(&tv_diff, &tv_end, &tv_begin);
PJ_LOG(3, (__FILE__, "Received: %s %0.2f msec", buffer, diff*1.0/1000));
pj_shutdown();
return 0;
}
/*
* select_test()
*
* Test main entry.
*/
int select_test()
{
pj_sock_t udp1=PJ_INVALID_SOCKET, udp2=PJ_INVALID_SOCKET;
pj_sockaddr_in udp_addr;
int status;
int setcount[3];
pj_str_t s;
const char data[] = "hello";
const int datalen = 5;
pj_ssize_t sent, received;
char buf[10];
pj_status_t rc;
PJ_LOG(3, (THIS_FILE, "...Testing simple UDP select()"));
// Create two UDP sockets.
rc = pj_sock_socket( pj_AF_INET(), pj_SOCK_DGRAM(), 0, &udp1);
if (rc != PJ_SUCCESS) {
app_perror("...error: unable to create socket", rc);
status=-10; goto on_return;
}
rc = pj_sock_socket( pj_AF_INET(), pj_SOCK_DGRAM(), 0, &udp2);
if (udp2 == PJ_INVALID_SOCKET) {
app_perror("...error: unable to create socket", rc);
status=-20; goto on_return;
}
// Bind one of the UDP socket.
pj_bzero(&udp_addr, sizeof(udp_addr));
udp_addr.sin_family = pj_AF_INET();
udp_addr.sin_port = UDP_PORT;
udp_addr.sin_addr = pj_inet_addr(pj_cstr(&s, "127.0.0.1"));
if (pj_sock_bind(udp2, &udp_addr, sizeof(udp_addr))) {
status=-30; goto on_return;
}
// Send data.
sent = datalen;
rc = pj_sock_sendto(udp1, data, &sent, 0, &udp_addr, sizeof(udp_addr));
if (rc != PJ_SUCCESS || sent != datalen) {
app_perror("...error: sendto() error", rc);
status=-40; goto on_return;
}
// Sleep a bit. See http://trac.pjsip.org/repos/ticket/890
pj_thread_sleep(10);
// Check that socket is marked as reable.
// Note that select() may also report that sockets are writable.
status = do_select(udp1, udp2, setcount);
if (status < 0) {
char errbuf[128];
pj_strerror(pj_get_netos_error(), errbuf, sizeof(errbuf));
PJ_LOG(1,(THIS_FILE, "...error: %s", errbuf));
status=-50; goto on_return;
}
if (status == 0) {
status=-60; goto on_return;
}
if (setcount[READ_FDS] != 1) {
status=-70; goto on_return;
}
if (setcount[WRITE_FDS] != 0) {
if (setcount[WRITE_FDS] == 2) {
PJ_LOG(3,(THIS_FILE, "...info: system reports writable sockets"));
} else {
status=-80; goto on_return;
}
} else {
PJ_LOG(3,(THIS_FILE,
"...info: system doesn't report writable sockets"));
}
if (setcount[EXCEPT_FDS] != 0) {
status=-90; goto on_return;
}
// Read the socket to clear readable sockets.
received = sizeof(buf);
rc = pj_sock_recv(udp2, buf, &received, 0);
if (rc != PJ_SUCCESS || received != 5) {
status=-100; goto on_return;
}
status = 0;
// Test timeout on the read part.
// This won't necessarily return zero, as select() may report that
// sockets are writable.
setcount[0] = setcount[1] = setcount[2] = 0;
status = do_select(udp1, udp2, setcount);
if (status != 0 && status != setcount[WRITE_FDS]) {
PJ_LOG(3,(THIS_FILE, "...error: expecting timeout but got %d sks set",
status));
PJ_LOG(3,(THIS_FILE, " rdset: %d, wrset: %d, exset: %d",
setcount[0], setcount[1], setcount[2]));
status = -110; goto on_return;
}
if (setcount[READ_FDS] != 0) {
PJ_LOG(3,(THIS_FILE, "...error: readable socket not expected"));
status = -120; goto on_return;
}
status = 0;
on_return:
if (udp1 != PJ_INVALID_SOCKET)
pj_sock_close(udp1);
if (udp2 != PJ_INVALID_SOCKET)
pj_sock_close(udp2);
return status;
}
static int server_thread(void *p)
{
struct server_t *srv = (struct server_t*)p;
char *pkt = (char*)pj_pool_alloc(pool, srv->buf_size);
pj_sock_t newsock = PJ_INVALID_SOCKET;
while (!thread_quit) {
pj_ssize_t pkt_len;
int rc;
pj_fd_set_t rset;
pj_time_val timeout = {0, 500};
while (!thread_quit) {
PJ_FD_ZERO(&rset);
PJ_FD_SET(srv->sock, &rset);
rc = pj_sock_select((int)srv->sock+1, &rset, NULL, NULL, &timeout);
if (rc != 1) {
continue;
}
rc = pj_sock_accept(srv->sock, &newsock, NULL, NULL);
if (rc == PJ_SUCCESS) {
break;
}
}
if (thread_quit)
break;
while (!thread_quit) {
PJ_FD_ZERO(&rset);
PJ_FD_SET(newsock, &rset);
rc = pj_sock_select((int)newsock+1, &rset, NULL, NULL, &timeout);
if (rc != 1) {
PJ_LOG(3,("http test", "client timeout"));
continue;
}
pkt_len = srv->buf_size;
rc = pj_sock_recv(newsock, pkt, &pkt_len, 0);
if (rc == PJ_SUCCESS) {
break;
}
}
if (thread_quit)
break;
/* Simulate network RTT */
pj_thread_sleep(50);
if (srv->action == ACTION_IGNORE) {
continue;
} else if (srv->action == ACTION_REPLY) {
pj_size_t send_size = 0;
unsigned ctr = 0;
pj_ansi_sprintf(pkt, "HTTP/1.0 200 OK\r\n");
if (srv->send_content_length) {
pj_ansi_sprintf(pkt + pj_ansi_strlen(pkt),
"Content-Length: %d\r\n",
srv->data_size);
}
pj_ansi_sprintf(pkt + pj_ansi_strlen(pkt), "\r\n");
pkt_len = pj_ansi_strlen(pkt);
rc = pj_sock_send(newsock, pkt, &pkt_len, 0);
if (rc != PJ_SUCCESS) {
pj_sock_close(newsock);
continue;
}
while (send_size < srv->data_size) {
pkt_len = srv->data_size - send_size;
if (pkt_len > (signed)srv->buf_size)
pkt_len = srv->buf_size;
send_size += pkt_len;
pj_create_random_string(pkt, pkt_len);
pj_ansi_sprintf(pkt, "\nPacket: %d", ++ctr);
pkt[pj_ansi_strlen(pkt)] = '\n';
rc = pj_sock_send(newsock, pkt, &pkt_len, 0);
if (rc != PJ_SUCCESS)
break;
}
pj_sock_close(newsock);
}
}
return 0;
}
static int send_recv_test(int sock_type,
pj_sock_t ss, pj_sock_t cs,
pj_sockaddr_in *dstaddr, pj_sockaddr_in *srcaddr,
int addrlen)
{
enum { DATA_LEN = 16 };
char senddata[DATA_LEN+4], recvdata[DATA_LEN+4];
pj_ssize_t sent, received, total_received;
pj_status_t rc;
TRACE_(("test", "....create_random_string()"));
pj_create_random_string(senddata, DATA_LEN);
senddata[DATA_LEN-1] = '\0';
/*
* Test send/recv small data.
*/
TRACE_(("test", "....sendto()"));
if (dstaddr) {
sent = DATA_LEN;
rc = pj_sock_sendto(cs, senddata, &sent, 0, dstaddr, addrlen);
if (rc != PJ_SUCCESS || sent != DATA_LEN) {
app_perror("...sendto error", rc);
rc = -140; goto on_error;
}
} else {
sent = DATA_LEN;
rc = pj_sock_send(cs, senddata, &sent, 0);
if (rc != PJ_SUCCESS || sent != DATA_LEN) {
app_perror("...send error", rc);
rc = -145; goto on_error;
}
}
TRACE_(("test", "....recv()"));
if (srcaddr) {
pj_sockaddr_in addr;
int srclen = sizeof(addr);
pj_bzero(&addr, sizeof(addr));
received = DATA_LEN;
rc = pj_sock_recvfrom(ss, recvdata, &received, 0, &addr, &srclen);
if (rc != PJ_SUCCESS || received != DATA_LEN) {
app_perror("...recvfrom error", rc);
rc = -150; goto on_error;
}
if (srclen != addrlen)
return -151;
if (pj_sockaddr_cmp(&addr, srcaddr) != 0) {
char srcaddr_str[32], addr_str[32];
strcpy(srcaddr_str, pj_inet_ntoa(srcaddr->sin_addr));
strcpy(addr_str, pj_inet_ntoa(addr.sin_addr));
PJ_LOG(3,("test", "...error: src address mismatch (original=%s, "
"recvfrom addr=%s)",
srcaddr_str, addr_str));
return -152;
}
} else {
/* Repeat recv() until all data is received.
* This applies only for non-UDP of course, since for UDP
* we would expect all data to be received in one packet.
*/
total_received = 0;
do {
received = DATA_LEN-total_received;
rc = pj_sock_recv(ss, recvdata+total_received, &received, 0);
if (rc != PJ_SUCCESS) {
app_perror("...recv error", rc);
rc = -155; goto on_error;
}
if (received <= 0) {
PJ_LOG(3,("", "...error: socket has closed! (received=%d)",
received));
rc = -156; goto on_error;
}
if (received != DATA_LEN-total_received) {
if (sock_type != pj_SOCK_STREAM()) {
PJ_LOG(3,("", "...error: expecting %u bytes, got %u bytes",
DATA_LEN-total_received, received));
rc = -157; goto on_error;
}
}
total_received += received;
} while (total_received < DATA_LEN);
}
TRACE_(("test", "....memcmp()"));
if (pj_memcmp(senddata, recvdata, DATA_LEN) != 0) {
PJ_LOG(3,("","...error: received data mismatch "
"(got:'%s' expecting:'%s'",
recvdata, senddata));
rc = -160; goto on_error;
}
/*
* Test send/recv big data.
*/
TRACE_(("test", "....sendto()"));
if (dstaddr) {
sent = BIG_DATA_LEN;
rc = pj_sock_sendto(cs, bigdata, &sent, 0, dstaddr, addrlen);
if (rc != PJ_SUCCESS || sent != BIG_DATA_LEN) {
app_perror("...sendto error", rc);
rc = -161; goto on_error;
}
} else {
sent = BIG_DATA_LEN;
rc = pj_sock_send(cs, bigdata, &sent, 0);
if (rc != PJ_SUCCESS || sent != BIG_DATA_LEN) {
app_perror("...send error", rc);
rc = -165; goto on_error;
}
}
TRACE_(("test", "....recv()"));
/* Repeat recv() until all data is received.
* This applies only for non-UDP of course, since for UDP
* we would expect all data to be received in one packet.
*/
total_received = 0;
do {
received = BIG_DATA_LEN-total_received;
rc = pj_sock_recv(ss, bigbuffer+total_received, &received, 0);
if (rc != PJ_SUCCESS) {
app_perror("...recv error", rc);
rc = -170; goto on_error;
}
if (received <= 0) {
PJ_LOG(3,("", "...error: socket has closed! (received=%d)",
received));
rc = -173; goto on_error;
}
if (received != BIG_DATA_LEN-total_received) {
if (sock_type != pj_SOCK_STREAM()) {
PJ_LOG(3,("", "...error: expecting %u bytes, got %u bytes",
BIG_DATA_LEN-total_received, received));
rc = -176; goto on_error;
}
}
total_received += received;
} while (total_received < BIG_DATA_LEN);
TRACE_(("test", "....memcmp()"));
if (pj_memcmp(bigdata, bigbuffer, BIG_DATA_LEN) != 0) {
PJ_LOG(3,("", "...error: received data has been altered!"));
rc = -180; goto on_error;
}
rc = 0;
on_error:
return rc;
}
void ioqueue_dispatch_read_event( pj_ioqueue_t *ioqueue, pj_ioqueue_key_t *h )
{
pj_status_t rc;
/* Lock the key. */
pj_mutex_lock(h->mutex);
if (IS_CLOSING(h)) {
pj_mutex_unlock(h->mutex);
return;
}
# if PJ_HAS_TCP
if (!pj_list_empty(&h->accept_list)) {
struct accept_operation *accept_op;
pj_bool_t has_lock;
/* Get one accept operation from the list. */
accept_op = h->accept_list.next;
pj_list_erase(accept_op);
accept_op->op = PJ_IOQUEUE_OP_NONE;
/* Clear bit in fdset if there is no more pending accept */
if (pj_list_empty(&h->accept_list))
ioqueue_remove_from_set(ioqueue, h, READABLE_EVENT);
rc=pj_sock_accept(h->fd, accept_op->accept_fd,
accept_op->rmt_addr, accept_op->addrlen);
if (rc==PJ_SUCCESS && accept_op->local_addr) {
rc = pj_sock_getsockname(*accept_op->accept_fd,
accept_op->local_addr,
accept_op->addrlen);
}
/* Unlock; from this point we don't need to hold key's mutex
* (unless concurrency is disabled, which in this case we should
* hold the mutex while calling the callback) */
if (h->allow_concurrent) {
/* concurrency may be changed while we're in the callback, so
* save it to a flag.
*/
has_lock = PJ_FALSE;
pj_mutex_unlock(h->mutex);
} else {
has_lock = PJ_TRUE;
}
/* Call callback. */
if (h->cb.on_accept_complete && !IS_CLOSING(h)) {
(*h->cb.on_accept_complete)(h,
(pj_ioqueue_op_key_t*)accept_op,
*accept_op->accept_fd, rc);
}
if (has_lock) {
pj_mutex_unlock(h->mutex);
}
}
else
# endif
if (key_has_pending_read(h)) {
struct read_operation *read_op;
pj_ssize_t bytes_read;
pj_bool_t has_lock;
/* Get one pending read operation from the list. */
read_op = h->read_list.next;
pj_list_erase(read_op);
/* Clear fdset if there is no pending read. */
if (pj_list_empty(&h->read_list))
ioqueue_remove_from_set(ioqueue, h, READABLE_EVENT);
bytes_read = read_op->size;
if ((read_op->op == PJ_IOQUEUE_OP_RECV_FROM)) {
read_op->op = PJ_IOQUEUE_OP_NONE;
rc = pj_sock_recvfrom(h->fd, read_op->buf, &bytes_read,
read_op->flags,
read_op->rmt_addr,
read_op->rmt_addrlen);
} else if ((read_op->op == PJ_IOQUEUE_OP_RECV)) {
read_op->op = PJ_IOQUEUE_OP_NONE;
rc = pj_sock_recv(h->fd, read_op->buf, &bytes_read,
read_op->flags);
} else {
pj_assert(read_op->op == PJ_IOQUEUE_OP_READ);
read_op->op = PJ_IOQUEUE_OP_NONE;
/*
* User has specified pj_ioqueue_read().
* On Win32, we should do ReadFile(). But because we got
* here because of select() anyway, user must have put a
* socket descriptor on h->fd, which in this case we can
* just call pj_sock_recv() instead of ReadFile().
* On Unix, user may put a file in h->fd, so we'll have
* to call read() here.
* This may not compile on systems which doesn't have
* read(). That's why we only specify PJ_LINUX here so
* that error is easier to catch.
*/
# if defined(PJ_WIN32) && PJ_WIN32 != 0 || \
defined(PJ_WIN32_WINCE) && PJ_WIN32_WINCE != 0
rc = pj_sock_recv(h->fd, read_op->buf, &bytes_read,
read_op->flags);
//rc = ReadFile((HANDLE)h->fd, read_op->buf, read_op->size,
// &bytes_read, NULL);
# elif (defined(PJ_HAS_UNISTD_H) && PJ_HAS_UNISTD_H != 0)
bytes_read = read(h->fd, read_op->buf, bytes_read);
rc = (bytes_read >= 0) ? PJ_SUCCESS : pj_get_os_error();
# elif defined(PJ_LINUX_KERNEL) && PJ_LINUX_KERNEL != 0
bytes_read = sys_read(h->fd, read_op->buf, bytes_read);
rc = (bytes_read >= 0) ? PJ_SUCCESS : -bytes_read;
# else
# error "Implement read() for this platform!"
# endif
}
if (rc != PJ_SUCCESS) {
# if defined(PJ_WIN32) && PJ_WIN32 != 0
/* On Win32, for UDP, WSAECONNRESET on the receive side
* indicates that previous sending has triggered ICMP Port
* Unreachable message.
* But we wouldn't know at this point which one of previous
* key that has triggered the error, since UDP socket can
* be shared!
* So we'll just ignore it!
*/
if (rc == PJ_STATUS_FROM_OS(WSAECONNRESET)) {
//PJ_LOG(4,(THIS_FILE,
// "Ignored ICMP port unreach. on key=%p", h));
}
# endif
/* In any case we would report this to caller. */
bytes_read = -rc;
}
/* Unlock; from this point we don't need to hold key's mutex
* (unless concurrency is disabled, which in this case we should
* hold the mutex while calling the callback) */
if (h->allow_concurrent) {
/* concurrency may be changed while we're in the callback, so
* save it to a flag.
*/
has_lock = PJ_FALSE;
pj_mutex_unlock(h->mutex);
} else {
has_lock = PJ_TRUE;
}
/* Call callback. */
if (h->cb.on_read_complete && !IS_CLOSING(h)) {
(*h->cb.on_read_complete)(h,
(pj_ioqueue_op_key_t*)read_op,
bytes_read);
}
if (has_lock) {
pj_mutex_unlock(h->mutex);
}
} else {
/*
* This is normal; execution may fall here when multiple threads
* are signalled for the same event, but only one thread eventually
* able to process the event.
*/
pj_mutex_unlock(h->mutex);
}
}
/*
* sock_producer_consumer()
*
* Simple producer-consumer benchmarking. Send loop number of
* buf_size size packets as fast as possible.
*/
static int sock_producer_consumer(int sock_type,
unsigned buf_size,
unsigned loop,
unsigned *p_bandwidth)
{
pj_sock_t consumer, producer;
pj_pool_t *pool;
char *outgoing_buffer, *incoming_buffer;
pj_timestamp start, stop;
unsigned i;
pj_highprec_t elapsed, bandwidth;
pj_size_t total_received;
pj_status_t rc;
/* Create pool. */
pool = pj_pool_create(mem, NULL, 4096, 4096, NULL);
if (!pool)
return -10;
/* Create producer-consumer pair. */
rc = app_socketpair(PJ_AF_INET, sock_type, 0, &consumer, &producer);
if (rc != PJ_SUCCESS) {
app_perror("...error: create socket pair", rc);
return -20;
}
/* Create buffers. */
outgoing_buffer = pj_pool_alloc(pool, buf_size);
incoming_buffer = pj_pool_alloc(pool, buf_size);
/* Start loop. */
pj_get_timestamp(&start);
total_received = 0;
for (i=0; i<loop; ++i) {
pj_ssize_t sent, part_received, received;
pj_time_val delay;
sent = buf_size;
rc = pj_sock_send(producer, outgoing_buffer, &sent, 0);
if (rc != PJ_SUCCESS || sent != (pj_ssize_t)buf_size) {
app_perror("...error: send()", rc);
return -61;
}
/* Repeat recv() until all data is part_received.
* This applies only for non-UDP of course, since for UDP
* we would expect all data to be part_received in one packet.
*/
received = 0;
do {
part_received = buf_size-received;
rc = pj_sock_recv(consumer, incoming_buffer+received,
&part_received, 0);
if (rc != PJ_SUCCESS) {
app_perror("...recv error", rc);
return -70;
}
if (part_received <= 0) {
PJ_LOG(3,("", "...error: socket has closed (part_received=%d)!",
part_received));
return -73;
}
if ((pj_size_t)part_received != buf_size-received) {
if (sock_type != PJ_SOCK_STREAM) {
PJ_LOG(3,("", "...error: expecting %u bytes, got %u bytes",
buf_size-received, part_received));
return -76;
}
}
received += part_received;
} while ((pj_size_t)received < buf_size);
total_received += received;
/* Stop test if it's been runnign for more than 10 secs. */
pj_get_timestamp(&stop);
delay = pj_elapsed_time(&start, &stop);
if (delay.sec > 10)
break;
}
/* Stop timer. */
pj_get_timestamp(&stop);
elapsed = pj_elapsed_usec(&start, &stop);
/* bandwidth = total_received * 1000 / elapsed */
bandwidth = total_received;
pj_highprec_mul(bandwidth, 1000);
pj_highprec_div(bandwidth, elapsed);
*p_bandwidth = (pj_uint32_t)bandwidth;
/* Close sockets. */
pj_sock_close(consumer);
pj_sock_close(producer);
/* Done */
pj_pool_release(pool);
return 0;
}
PJ_DEF(int) pj_ioqueue_poll( pj_ioqueue_t *ioque, const pj_time_val *timeout)
{
pj_fdset_t rfdset, wfdset, xfdset;
int rc;
pj_ioqueue_key_t *h;
/* Copy ioqueue's fd_set to local variables. */
pj_mutex_lock(ioque->mutex);
rfdset = ioque->rfdset;
wfdset = ioque->wfdset;
#if PJ_HAS_TCP
xfdset = ioque->xfdset;
#else
PJ_FD_ZERO(&xfdset);
#endif
/* Unlock ioqueue before select(). */
pj_mutex_unlock(ioque->mutex);
rc = pj_sock_select(FD_SETSIZE, &rfdset, &wfdset, &xfdset, timeout);
if (rc <= 0)
return rc;
/* Lock ioqueue again before scanning for signalled sockets. */
pj_mutex_lock(ioque->mutex);
#if PJ_HAS_TCP
/* Scan for exception socket */
h = ioque->hlist.next;
for ( ; h!=&ioque->hlist; h = h->next) {
if ((h->op & PJ_IOQUEUE_OP_CONNECT) && PJ_FD_ISSET(h->fd, &xfdset))
break;
}
if (h != &ioque->hlist) {
/* 'connect()' should be the only operation. */
pj_assert((h->op == PJ_IOQUEUE_OP_CONNECT));
/* Clear operation. */
h->op &= ~(PJ_IOQUEUE_OP_CONNECT);
PJ_FD_CLR(h->fd, &ioque->wfdset);
PJ_FD_CLR(h->fd, &ioque->xfdset);
/* Unlock I/O queue before calling callback. */
pj_mutex_unlock(ioque->mutex);
/* Call callback. */
(*h->cb.on_connect_complete)(h, -1);
return 1;
}
#endif /* PJ_HAS_TCP */
/* Scan for writable socket */
h = ioque->hlist.next;
for ( ; h!=&ioque->hlist; h = h->next) {
if ((PJ_IOQUEUE_IS_WRITE_OP(h->op) || PJ_IOQUEUE_IS_CONNECT_OP(h->op)) && PJ_FD_ISSET(h->fd, &wfdset))
break;
}
if (h != &ioque->hlist) {
pj_assert(PJ_IOQUEUE_IS_WRITE_OP(h->op) || PJ_IOQUEUE_IS_CONNECT_OP(h->op));
#if PJ_HAS_TCP
if ((h->op & PJ_IOQUEUE_OP_CONNECT)) {
/* Completion of connect() operation */
pj_ssize_t bytes_transfered;
#if defined(PJ_LINUX)
/* from connect(2):
* On Linux, use getsockopt to read the SO_ERROR option at
* level SOL_SOCKET to determine whether connect() completed
* successfully (if SO_ERROR is zero).
*/
int value;
socklen_t vallen = sizeof(value);
int rc = getsockopt(h->fd, SOL_SOCKET, SO_ERROR, &value, &vallen);
if (rc != 0) {
/* Argh!! What to do now???
* Just indicate that the socket is connected. The
* application will get error as soon as it tries to use
* the socket to send/receive.
*/
PJ_PERROR(("ioqueue", "Unable to determine connect() status"));
bytes_transfered = 0;
} else {
bytes_transfered = value;
}
#elif defined(PJ_WIN32)
bytes_transfered = 0; /* success */
#else
# error "Got to check this one!"
#endif
/* Clear operation. */
h->op &= (~PJ_IOQUEUE_OP_CONNECT);
PJ_FD_CLR(h->fd, &ioque->wfdset);
PJ_FD_CLR(h->fd, &ioque->xfdset);
/* Unlock mutex before calling callback. */
pj_mutex_unlock(ioque->mutex);
/* Call callback. */
(*h->cb.on_connect_complete)(h, bytes_transfered);
return 1;
} else
#endif /* PJ_HAS_TCP */
{
/* Completion of write(), send(), or sendto() operation. */
/* Clear operation. */
h->op &= ~(PJ_IOQUEUE_OP_WRITE | PJ_IOQUEUE_OP_SEND_TO);
PJ_FD_CLR(h->fd, &ioque->wfdset);
/* Unlock mutex before calling callback. */
pj_mutex_unlock(ioque->mutex);
/* Call callback. */
/* All data must have been sent? */
(*h->cb.on_write_complete)(h, h->wr_buflen);
return 1;
}
/* Unreached. */
}
/* Scan for readable socket. */
h = ioque->hlist.next;
for ( ; h!=&ioque->hlist; h = h->next) {
if ((PJ_IOQUEUE_IS_READ_OP(h->op) || PJ_IOQUEUE_IS_ACCEPT_OP(h->op)) &&
PJ_FD_ISSET(h->fd, &rfdset))
break;
}
if (h != &ioque->hlist) {
pj_assert(PJ_IOQUEUE_IS_READ_OP(h->op) || PJ_IOQUEUE_IS_ACCEPT_OP(h->op));
# if PJ_HAS_TCP
if ((h->op & PJ_IOQUEUE_OP_ACCEPT)) {
/* accept() must be the only operation specified on server socket */
pj_assert(h->op == PJ_IOQUEUE_OP_ACCEPT);
*h->accept_fd = pj_sock_accept(h->fd, h->rmt_addr, h->rmt_addrlen);
if (*h->accept_fd == PJ_INVALID_SOCKET) {
rc = -1;
} else if (h->local_addr) {
rc = pj_sock_getsockname(*h->accept_fd, h->local_addr, h->local_addrlen);
} else {
rc = 0;
}
h->op &= ~(PJ_IOQUEUE_OP_ACCEPT);
PJ_FD_CLR(h->fd, &ioque->rfdset);
/* Unlock mutex before calling callback. */
pj_mutex_unlock(ioque->mutex);
/* Call callback. */
(*h->cb.on_accept_complete)(h, rc);
return 1;
} else
# endif
if ((h->op & PJ_IOQUEUE_OP_RECV_FROM)) {
rc = pj_sock_recvfrom(h->fd, h->rd_buf, h->rd_buflen, 0,
h->rmt_addr, h->rmt_addrlen);
} else {
rc = pj_sock_recv(h->fd, h->rd_buf, h->rd_buflen, 0);
}
if (rc < 0) {
pj_status_t sock_err = -1;
# if defined(_WIN32)
/* On Win32, for UDP, WSAECONNRESET on the receive side
* indicates that previous sending has triggered ICMP Port
* Unreachable message.
* But we wouldn't know at this point which one of previous
* key that has triggered the error, since UDP socket can
* be shared!
* So we'll just ignore it!
*/
sock_err = pj_sock_getlasterror();
if (sock_err == PJ_ECONNRESET) {
pj_mutex_unlock(ioque->mutex);
PJ_LOG(4,(THIS_FILE, "Received ICMP port unreachable on key=%p (ignored)!", h));
return 0;
}
# endif
PJ_LOG(4, (THIS_FILE, "socket recv error on key %p, rc=%d, err=%d", h, rc, sock_err));
}
h->op &= ~(PJ_IOQUEUE_OP_READ | PJ_IOQUEUE_OP_RECV_FROM);
PJ_FD_CLR(h->fd, &ioque->rfdset);
/* Unlock mutex before callback. */
pj_mutex_unlock(ioque->mutex);
/* Call callback. */
(*h->cb.on_read_complete)(h, rc);
return 1;
}
/* Shouldn't happen. */
/* For strange reason on WinXP select() can return 1 while there is no
* fd_set signaled. */
/* pj_assert(0); */
rc = 0;
pj_mutex_unlock(ioque->mutex);
return rc;
}
