//----------------------------------------------------------------------
void SipPhone::muteMicrophoneForCall(const int &call_id, const float &mute)
{
pjsua_call_info ci;
pjsua_call_get_info(call_id,&ci);
pjsua_conf_adjust_tx_level(ci.conf_slot, mute);
}
/**
* \fn _ics_core_adjust_audio_volume()
* \brief Tuy chinh am luong cho mic va speaker
* \param agr1: ics_t *data
* agr2: char *device
* agr3: level
*/
static void _ics_core_adjust_audio_volume(ics_t *data, char *device, float level) {
if (strcmp(device,"r") == 0) {
pjsua_conf_adjust_rx_level(0, level);
}
else if (strcmp(device,"t") == 0) {
pjsua_conf_adjust_tx_level(0, level);
}
else
printf("Invalid input to adjust device");
}
/**
* \fn _ics_adjust_audio_volume()
* \brief Tuy chinh am luong cho mic va speaker
* \param agr1: ics_t *data
* agr2: char *device
* agr3: level
*/
static void _ics_adjust_audio_volume(ics_t *data, int device, float level) {
PJ_UNUSED_ARG(data);
if (device == 0) {
pjsua_conf_adjust_rx_level(0, level);
}
else if (device == 1) {
pjsua_conf_adjust_tx_level(0, level);
}
else
SHOW_LOG(3, "Invalid input to adjust device");
}
void ScreenPhone::setVolume(const float volume, const QString &device)
{
if(device == "mic")
{
pjsua_conf_adjust_rx_level(0, volume);
controller->qmlviewer->rootContext()->setContextProperty("micVolume", volume);
}
else if(device == "spk")
{
pjsua_conf_adjust_tx_level(0, volume);
controller->qmlviewer->rootContext()->setContextProperty("spkVolume", volume);
}
}
static void ui_adjust_volume()
{
char buf[128];
char text[128];
sprintf(buf, "Adjust mic level: [%4.1fx] ", app_config.mic_level);
if (simple_input(buf,text,sizeof(text))) {
char *err;
app_config.mic_level = (float)strtod(text, &err);
pjsua_conf_adjust_rx_level(0, app_config.mic_level);
}
sprintf(buf, "Adjust speaker level: [%4.1fx] ", app_config.speaker_level);
if (simple_input(buf,text,sizeof(text))) {
char *err;
app_config.speaker_level = (float)strtod(text, &err);
pjsua_conf_adjust_tx_level(0, app_config.speaker_level);
}
}
//----------------------------------------------------------------------
void SipPhone::muteSound(const bool &mute)
{
float level = 0.f;
if (mute)
{
LogInfo info(LogInfo::STATUS_MESSAGE, "phone", 0, "muteSound: true");
signalLogData(info);
level = 0.f;
}
else
{
LogInfo info(LogInfo::STATUS_MESSAGE, "phone", 0, "muteSound: false");
signalLogData(info);
level = 1.f;
}
speaker_level_ = level;
pjsua_conf_adjust_tx_level(0, level);
self_->signalSoundLevel(int(level * 255));
}
//=============================================================================
void SIPConference::AdjustTranVolume(pjsua_call_id call_id, float level)
{
VFVW_LOG("entering AdjustTranVolume()");
pjsua_call_info ci;
pjsua_call_get_info (call_id, &ci);
VFVW_LOG("AdjustTranVolume call_id=%d,level=%f", call_id, level);
#ifdef DEBUG
unsigned tx_level = 0;
unsigned rx_level = 0;
status = pjsua_conf_get_signal_level(ci.conf_slot, &tx_level, &rx_level);
if (status != PJ_SUCCESS)
error_exit ("Error get signal level", status);
VFVW_LOG("current tx_level=%d,rx_level=%d", tx_level, rx_level);
#endif
status = pjsua_conf_adjust_tx_level(ci.conf_slot, level);
if (status != PJ_SUCCESS)
error_exit ("Error adjust tx level", status);
}
//----------------------------------------------------------------------
void SipPhone::init()
{
pj_status_t status;
/* Create pjsua first! */
status = pjsua_create();
if (status != PJ_SUCCESS)
{
LogInfo info(LogInfo::STATUS_FATAL_ERROR, "pjsip", status, "Error in pjsua_create()");
signalLogData(info);
return;
}
/* Init pjsua */
{
pjsua_config cfg;
pjsua_logging_config log_cfg;
ConfigFileHandler &config = ConfigFileHandler::getInstance();
QString stun = config.getStunServer();
pjsua_config_default(&cfg);
if (stun.size())
{
char ch_stun[100];
if (stun.size() > 99)
{
LogInfo info(LogInfo::STATUS_ERROR, "pjsip", 0, "Error init pjsip, stun-server too long");
signalLogData(info);
return;
}
strcpy(ch_stun, stun.toLocal8Bit().data());
ch_stun[stun.size()] = 0;
cfg.stun_srv[cfg.stun_srv_cnt++] = pj_str(ch_stun);
}
cfg.enable_unsolicited_mwi = PJ_FALSE;
cfg.cb.on_incoming_call = &incomingCallCb;
cfg.cb.on_call_state = &callStateCb;
cfg.cb.on_call_media_state = &callMediaStateCb;
cfg.cb.on_reg_state = ®StateCb;
pjsua_logging_config_default(&log_cfg);
log_cfg.console_level = 4;
status = pjsua_init(&cfg, &log_cfg, NULL);
printf("init successfull\n");
if (status != PJ_SUCCESS)
{
LogInfo info(LogInfo::STATUS_FATAL_ERROR, "pjsip", status, "Error in pjsua_init()");
signalLogData(info);
return;
}
}
/* Add UDP transport. */
{
pjsua_transport_config cfg;
pjsua_acc_id aid;
pjsua_transport_id transport_id = -1;
pjsua_transport_config tcp_cfg;
pjsua_transport_config_default(&cfg);
cfg.port = 5060;
status = pjsua_transport_create(PJSIP_TRANSPORT_UDP, &cfg, &transport_id);
if (status != PJ_SUCCESS)
{
LogInfo info(LogInfo::STATUS_FATAL_ERROR, "pjsip", status, "Error creating transport");
signalLogData(info);
return;
}
/* Add local account */
pjsua_acc_add_local(transport_id, PJ_TRUE, &aid);
pjsua_acc_set_online_status(aid, PJ_TRUE);
if (cfg.port == 0)
{
pjsua_transport_info ti;
pj_sockaddr_in *a;
pjsua_transport_get_info(transport_id, &ti);
a = (pj_sockaddr_in*)&ti.local_addr;
tcp_cfg.port = pj_ntohs(a->sin_port);
}
}
/* Initialization is done, now start pjsua */
status = pjsua_start();
if (status != PJ_SUCCESS)
{
LogInfo info(LogInfo::STATUS_FATAL_ERROR, "pjsip", status, "Error starting PJSUA");
signalLogData(info);
return;
}
pjsua_conf_adjust_rx_level(0, 1.f);
pjsua_conf_adjust_tx_level(0, 1.f);
speaker_level_ = 1.f;
mic_level_ = 1.f;
}