void platform_early_init(void)
{
platform_init_interrupts();
platform_init_timer();
msm_clock_init();
msm_gpio_init();
}
void platform_early_init(void)
{
board_init();
platform_init_interrupts();
platform_init_timer();
msm_gpio_init();
}
void platform_early_init(void)
{
system_rev = HW_REV;
/* initialize clocks */
clock_init_early();
/* initialize GPIOs */
gpio_init_early();
/* initialize the interrupt controller */
platform_init_interrupts();
/* initialize the timer block */
platform_init_timer();
/* initialize the uart */
uart_init_early();
#if defined(TCC_I2C_USE)
i2c_init_early();
#endif
adc_init_early();
}
void platform_early_init(void)
{
//uart3_clock_init();
//uart_init();
platform_init_interrupts();
platform_init_timer();
}
void platform_early_init(void)
{
/* initialize the interrupt controller */
platform_init_interrupts();
/* initialize the timer block */
platform_init_timer();
}
void platform_early_init(void)
{
uart1_mux_init();
uart1_clock_init();
uart_init();
platform_init_interrupts();
platform_init_timer();
}
void platform_init(void)
{
/* init interrupt controller */
platform_init_interrupts();
/* init serial port */
console_init();
/* init timmer for kernel tick */
platform_init_timer();
//platform_set_periodic_timer(timer_tick, 0, 10); /* 10ms */
}
void platform_early_init(void)
{
/* update the heap end so we can take advantage of more ram */
platform_init_multiboot_info();
/* get the text console working */
platform_init_console();
/* initialize the interrupt controller */
platform_init_interrupts();
/* initialize the timer */
platform_init_timer();
}
void platform_early_init(void)
{
/* initialize the basic clocks */
per_L3_config();
per_L4_config();
wkup_clk_config();
/* initialize the tx half of the debug uart */
platform_init_debug();
/* initialize the interrupt controller */
platform_init_interrupts();
/* initialize the timer */
platform_init_timer();
}
void platform_early_init(void)
{
#if WITH_DEBUG_UART
uart1_clock_init();
uart_init();
#endif
if(machine_is_8x25()) {
qgic_init();
target_uses_qgic = 1;
debug_timer = (GIC_PPI_START + 2);
gpt_timer = (GIC_PPI_START + 3);
usb_hs_int = INT_USB_HS_GIC;
} else {
platform_init_interrupts();
debug_timer = 8;
gpt_timer = 7;
usb_hs_int = INT_USB_HS_VIC;
}
platform_init_timer();
}
void platform_early_init(void)
{
platform_init_uart();
/* update the heap end so we can take advantage of more ram */
platform_init_multiboot_info();
/* get the text console working */
platform_init_console();
/* initialize the interrupt controller */
platform_init_interrupts();
/* initialize the timer */
platform_init_timer();
#if WITH_KERNEL_VM
heap_arena_init();
pmm_add_arena(&heap_arena);
#endif
}
void platform_early_init(void)
{
#ifdef LK_PROFILING
unsigned int time_led_init;
unsigned int time_pmic6329_init;
unsigned int time_i2c_init;
unsigned int time_disp_init;
unsigned int time_platform_early_init;
time_platform_early_init = get_timer(0);
#endif
/* initialize the uart */
uart_init_early();
/* initialize the frame buffet information */
g_fb_size = mt_disp_get_vram_size();
g_fb_base = memory_size() - g_fb_size;
dprintf(INFO, "FB base = 0x%x, FB size = %d\n", g_fb_base, g_fb_size);
platform_init_interrupts();
platform_early_init_timer();
mt_gpio_set_default();
#ifdef LK_PROFILING
time_i2c_init = get_timer(0);
#endif
// i2c_v1_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- i2c init takes %d ms -------- \n", get_timer(time_i2c_init));
#endif
mtk_wdt_init();
#ifdef LK_PROFILING
time_led_init = get_timer(0);
#endif
leds_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- led init takes %d ms -------- \n", get_timer(time_led_init));
#endif
isink0_init(); //turn on PMIC6329 isink0
#ifdef LK_PROFILING
time_disp_init = get_timer(0);
#endif
mt_disp_init((void *)g_fb_base);
#ifdef LK_PROFILING
printf("[PROFILE] ------- disp init takes %d ms -------- \n", get_timer(time_disp_init));
#endif
#ifdef CONFIG_CFB_CONSOLE
drv_video_init();
#endif
#ifdef LK_PROFILING
time_pmic6329_init = get_timer(0);
#endif
pmic6329_init();
//<2013/01/03-samhuang, improve KPI-0092 to add VIB before show logo.
lk_vibr_enable();
//>2013/01/03-samhuang
#ifdef LK_PROFILING
printf("[PROFILE] ------- pmic6329_init takes %d ms -------- \n", get_timer(time_pmic6329_init));
printf("[PROFILE] ------- platform_early_init takes %d ms -------- \n", get_timer(time_platform_early_init));
#endif
}
void platform_init()
{
dprintf(DEBUG, "platform_init: initializing interrupts\n");
platform_init_interrupts();
dprintf(DEBUG, "platform_init: finished initializing interrupts\n");
}
//#define PMIC_WRAP_PORTING //only for lk early porting
void platform_early_init(void)
{
#ifdef LK_PROFILING
unsigned int time_led_init;
unsigned int time_pmic6329_init;
unsigned int time_platform_early_init;
unsigned int time_repair_sram;
unsigned int time_display_early_init;
unsigned int time_wdt_early_init;
time_platform_early_init = get_timer(0);
#endif
/* initialize the uart */
uart_init_early();
platform_init_interrupts();
platform_early_init_timer();
mt_gpio_set_default();
#ifdef REPAIR_SRAM_ENABLE_LK_FOR_82_BRINGUP
#ifdef LK_PROFILING
time_repair_sram = get_timer(0);
#endif
int repair_ret;
repair_ret = repair_sram();
if(repair_ret != 0)
{
printf("Sram repair failed %d\n", repair_ret);
while(1);
}
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- Repair SRAM takes %d ms -------- \n",(int) get_timer(time_repair_sram));
#endif
#endif
//i2c_v1_init();
#ifdef LK_PROFILING
time_wdt_early_init = get_timer(0);
#endif
mtk_wdt_init();
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- WDT Init takes %d ms -------- \n", (int)get_timer(time_wdt_early_init));
#endif
// WDT will be triggered when uncompressing linux image on FPGA
#ifdef MACH_FPGA
mtk_wdt_disable();
#endif
#ifdef MTK_MT8193_SUPPORT
mt8193_init();
#endif
/* initialize the frame buffet information */
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
#ifdef LK_PROFILING
time_display_early_init = get_timer(0);
#endif
g_fb_size = mt_disp_get_vram_size();
g_fb_base = memory_size() - g_fb_size + DRAM_PHY_ADDR;
dprintf(INFO, "FB base = 0x%x, FB size = %d\n", g_fb_base, g_fb_size);
#ifdef LK_PROFILING
dprintf(INFO,"[PROFILE] ------- Display eraly init takes %d ms -------- \n", (int)get_timer(time_display_early_init));
#endif
#endif
#ifdef LK_PROFILING
time_led_init = get_timer(0);
#endif
#ifndef MACH_FPGA
leds_init();
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- led init takes %d ms -------- \n", get_timer(time_led_init));
#endif
isink0_init(); //turn on PMIC6329 isink0
//FIXME: Disable for MT6582 FPGA Ealry Porting
#ifndef DISABLE_DISPLAY_IN_LK_FOR_82_BRINGUP
if (!(lcm_params->type==LCM_TYPE_DSI && lcm_params->dsi.mode ==CMD_MODE))
mt_disp_init((void *)g_fb_base);
#endif
#ifdef PMIC_WRAP_PORTING
pwrap_init_lk();
pwrap_init_for_early_porting();
#endif
#ifdef LK_PROFILING
time_pmic6329_init = get_timer(0);
#endif
pmic_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- pmic_init takes %d ms -------- \n", get_timer(time_pmic6329_init));
printf("[PROFILE] ------- platform_early_init takes %d ms -------- \n", get_timer(time_platform_early_init));
#endif
}
void platform_early_init(void)
{
#ifdef LK_PROFILING
unsigned int time_led_init;
unsigned int time_pmic6329_init;
unsigned int time_i2c_init;
unsigned int time_disp_init;
unsigned int time_platform_early_init;
time_platform_early_init = get_timer(0);
#endif
/* initialize the frame buffet information */
g_fb_size = mt_disp_get_vram_size();
g_fb_base = memory_size() - g_fb_size + DRAM_PHY_ADDR;
dprintf(INFO, "FB base = 0x%x, FB size = %d\n", g_fb_base, g_fb_size);
platform_init_interrupts();
platform_early_init_timer();
mt_gpio_set_default();
/* initialize the uart */
uart_init_early();
#ifdef LK_PROFILING
time_i2c_init = get_timer(0);
#endif
mt_i2c_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- i2c init takes %d ms -------- \n", get_timer(time_i2c_init));
#endif
mtk_wdt_init();
#ifdef LK_PROFILING
time_led_init = get_timer(0);
#endif
#ifndef MACH_FPAG
leds_init();
#endif
#ifdef LK_PROFILING
printf("[PROFILE] ------- led init takes %d ms -------- \n", get_timer(time_led_init));
#endif
isink0_init(); //turn on PMIC6329 isink0
#ifdef LK_PROFILING
time_disp_init = get_timer(0);
#endif
mt_disp_init((void *)g_fb_base);
#ifdef LK_PROFILING
printf("[PROFILE] ------- disp init takes %d ms -------- \n", get_timer(time_disp_init));
#endif
#ifdef CONFIG_CFB_CONSOLE
drv_video_init();
#endif
#ifdef MACH_FPGA
pwrap_init_lk();
pwrap_init_for_early_porting();
#endif
#ifdef LK_PROFILING
time_pmic6329_init = get_timer(0);
#endif
pmic6320_init();
#ifdef LK_PROFILING
printf("[PROFILE] ------- pmic6329_init takes %d ms -------- \n", get_timer(time_pmic6329_init));
printf("[PROFILE] ------- platform_early_init takes %d ms -------- \n", get_timer(time_platform_early_init));
#endif
}
void platform_early_init(void)
{
uart_init();
platform_init_interrupts();
platform_init_timer();
}