void DiveGasPressureItem::modelDataChanged(const QModelIndex &topLeft, const QModelIndex &bottomRight)
{
// We don't have enougth data to calculate things, quit.
if (!shouldCalculateStuff(topLeft, bottomRight))
return;
int last_index = -1;
QPolygonF boundingPoly; // This is the "Whole Item", but a pressure can be divided in N Polygons.
polygons.clear();
for (int i = 0, count = dataModel->rowCount(); i < count; i++) {
plot_data *entry = dataModel->data().entry + i;
int mbar = GET_PRESSURE(entry);
if (entry->cylinderindex != last_index) {
polygons.append(QPolygonF()); // this is the polygon that will be actually drawned on screen.
last_index = entry->cylinderindex;
}
if (!mbar) {
continue;
}
QPointF point(hAxis->posAtValue(entry->sec), vAxis->posAtValue(mbar));
boundingPoly.push_back(point); // The BoundingRect
polygons.last().push_back(point); // The polygon thta will be plotted.
}
setPolygon(boundingPoly);
qDeleteAll(texts);
texts.clear();
int mbar, cyl;
int seen_cyl[MAX_CYLINDERS] = { false, };
int last_pressure[MAX_CYLINDERS] = { 0, };
int last_time[MAX_CYLINDERS] = { 0, };
struct plot_data *entry;
cyl = -1;
for (int i = 0, count = dataModel->rowCount(); i < count; i++) {
entry = dataModel->data().entry + i;
mbar = GET_PRESSURE(entry);
if (!mbar)
continue;
if (cyl != entry->cylinderindex) {
cyl = entry->cylinderindex;
if (!seen_cyl[cyl]) {
plotPressureValue(mbar, entry->sec, Qt::AlignRight | Qt::AlignTop);
plotGasValue(mbar, entry->sec, Qt::AlignRight | Qt::AlignBottom,
displayed_dive.cylinder[cyl].gasmix);
seen_cyl[cyl] = true;
}
}
last_pressure[cyl] = mbar;
last_time[cyl] = entry->sec;
}
for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) {
if (last_time[cyl]) {
plotPressureValue(last_pressure[cyl], last_time[cyl], Qt::AlignLeft | Qt::AlignTop);
}
}
}
void DiveGasPressureItem::modelDataChanged(const QModelIndex &topLeft, const QModelIndex &bottomRight)
{
// We don't have enougth data to calculate things, quit.
if (!shouldCalculateStuff(topLeft, bottomRight))
return;
int last_index = -1;
int o2mbar;
QPolygonF boundingPoly, o2Poly; // This is the "Whole Item", but a pressure can be divided in N Polygons.
polygons.clear();
if (displayed_dive.dc.divemode == CCR)
polygons.append(o2Poly);
for (int i = 0, count = dataModel->rowCount(); i < count; i++) {
o2mbar = 0;
plot_data *entry = dataModel->data().entry + i;
int mbar = GET_PRESSURE(entry);
if (displayed_dive.dc.divemode == CCR)
o2mbar = GET_O2CYLINDER_PRESSURE(entry);
if (entry->cylinderindex != last_index) {
polygons.append(QPolygonF()); // this is the polygon that will be actually drawn on screen.
last_index = entry->cylinderindex;
}
if (!mbar) {
continue;
}
if (o2mbar) {
QPointF o2point(hAxis->posAtValue(entry->sec), vAxis->posAtValue(o2mbar));
boundingPoly.push_back(o2point);
polygons.first().push_back(o2point);
}
QPointF point(hAxis->posAtValue(entry->sec), vAxis->posAtValue(mbar));
boundingPoly.push_back(point); // The BoundingRect
polygons.last().push_back(point); // The polygon thta will be plotted.
}
setPolygon(boundingPoly);
qDeleteAll(texts);
texts.clear();
int mbar, cyl;
int seen_cyl[MAX_CYLINDERS] = { false, };
int last_pressure[MAX_CYLINDERS] = { 0, };
int last_time[MAX_CYLINDERS] = { 0, };
struct plot_data *entry;
cyl = -1;
o2mbar = 0;
double print_y_offset[8][2] = { { 0, -0.5 }, { 0, -0.5 }, { 0, -0.5 }, { 0, -0.5 }, { 0, -0.5 } ,{ 0, -0.5 }, { 0, -0.5 }, { 0, -0.5 } };
// CCR dives: These are offset values used to print the gas lables and pressures on a CCR dive profile at
// appropriate Y-coordinates: One doublet of values for each of 8 cylinders.
// Order of offsets within a doublet: gas lable offset; gas pressure offset.
// The array is initialised with default values that apply to non-CCR dives.
bool offsets_initialised = false;
int o2cyl = -1, dilcyl = -1;
QFlags<Qt::AlignmentFlag> alignVar= Qt::AlignTop, align_dil = Qt::AlignBottom, align_o2 = Qt::AlignTop;
double axisRange = (vAxis->maximum() - vAxis->minimum())/1000; // Convert axis pressure range to bar
double axisLog = log10(log10(axisRange));
for (int i = 0, count = dataModel->rowCount(); i < count; i++) {
entry = dataModel->data().entry + i;
mbar = GET_PRESSURE(entry);
if (displayed_dive.dc.divemode == CCR && displayed_dive.oxygen_cylinder_index >= 0)
o2mbar = GET_O2CYLINDER_PRESSURE(entry);
if (o2mbar) { // If there is an o2mbar value then this is a CCR dive. Then do:
// The first time an o2 value is detected, see if the oxygen cyl pressure graph starts above or below the dil graph
if (!offsets_initialised) { // Initialise the parameters for placing the text correctly near the graph line:
o2cyl = displayed_dive.oxygen_cylinder_index;
dilcyl = displayed_dive.diluent_cylinder_index;
if ((o2mbar > mbar)) { // If above, write o2 start cyl pressure above graph and diluent pressure below graph:
print_y_offset[o2cyl][0] = -7 * axisLog; // y offset for oxygen gas lable (above); pressure offsets=-0.5, already initialised
print_y_offset[dilcyl][0] = 5 * axisLog; // y offset for diluent gas lable (below)
} else { // ... else write o2 start cyl pressure below graph:
print_y_offset[o2cyl][0] = 5 * axisLog; // o2 lable & pressure below graph; pressure offsets=-0.5, already initialised
print_y_offset[dilcyl][0] = -7.8 * axisLog; // and diluent lable above graph.
align_dil = Qt::AlignTop;
align_o2 = Qt::AlignBottom;
}
offsets_initialised = true;
}
if (!seen_cyl[displayed_dive.oxygen_cylinder_index]) { //For o2, on the left of profile, write lable and pressure
plotPressureValue(o2mbar, entry->sec, align_o2, print_y_offset[o2cyl][1]);
plotGasValue(o2mbar, entry->sec, displayed_dive.cylinder[displayed_dive.oxygen_cylinder_index].gasmix, align_o2, print_y_offset[o2cyl][0]);
seen_cyl[displayed_dive.oxygen_cylinder_index] = true;
}
last_pressure[displayed_dive.oxygen_cylinder_index] = o2mbar;
last_time[displayed_dive.oxygen_cylinder_index] = entry->sec;
alignVar = align_dil;
}
if (!mbar)
continue;
if (cyl != entry->cylinderindex) { // Pressure value near the left hand edge of the profile - other cylinders:
cyl = entry->cylinderindex; // For each other cylinder, write the gas lable and pressure
if (!seen_cyl[cyl]) {
plotPressureValue(mbar, entry->sec, alignVar, print_y_offset[cyl][1]);
plotGasValue(mbar, entry->sec, displayed_dive.cylinder[cyl].gasmix, align_dil, print_y_offset[cyl][0]);
seen_cyl[cyl] = true;
}
}
last_pressure[cyl] = mbar;
last_time[cyl] = entry->sec;
}
for (cyl = 0; cyl < MAX_CYLINDERS; cyl++) { // For each cylinder, on right hand side of profile, write cylinder pressure
alignVar = ((o2cyl >= 0) && (cyl == displayed_dive.oxygen_cylinder_index)) ? align_o2 : align_dil;
if (last_time[cyl]) {
plotPressureValue(last_pressure[cyl], last_time[cyl], (alignVar | Qt::AlignLeft), print_y_offset[cyl][1]);
}
}
}
void DiveGasPressureItem::modelDataChanged(const QModelIndex &topLeft, const QModelIndex &bottomRight)
{
// We don't have enougth data to calculate things, quit.
if (!shouldCalculateStuff(topLeft, bottomRight))
return;
int plotted_cyl[MAX_CYLINDERS] = { false, };
int last_plotted[MAX_CYLINDERS] = { 0, };
QPolygonF poly[MAX_CYLINDERS];
QPolygonF boundingPoly;
polygons.clear();
for (int i = 0, count = dataModel->rowCount(); i < count; i++) {
struct plot_data *entry = dataModel->data().entry + i;
for (int cyl = 0; cyl < MAX_CYLINDERS; cyl++) {
int mbar = GET_PRESSURE(entry, cyl);
int time = entry->sec;
if (!mbar)
continue;
QPointF point(hAxis->posAtValue(time), vAxis->posAtValue(mbar));
boundingPoly.push_back(point);
if (plotted_cyl[cyl]) {
/* Have we used this culinder in the last two minutes? Continue */
if (time - last_plotted[cyl] <= 2*60) {
poly[cyl].push_back(point);
last_plotted[cyl] = time;
continue;
}
/* Finish the previous one, start a new one */
polygons.append(poly[cyl]);
poly[cyl] = QPolygonF();
}
plotted_cyl[cyl] = true;
last_plotted[cyl] = time;
poly[cyl].push_back(point);
}
}
for (int cyl = 0; cyl < MAX_CYLINDERS; cyl++) {
if (!plotted_cyl[cyl])
continue;
polygons.append(poly[cyl]);
}
setPolygon(boundingPoly);
qDeleteAll(texts);
texts.clear();
int seen_cyl[MAX_CYLINDERS] = { false, };
int last_pressure[MAX_CYLINDERS] = { 0, };
int last_time[MAX_CYLINDERS] = { 0, };
// These are offset values used to print the gas lables and pressures on a
// dive profile at appropriate Y-coordinates. We alternate aligning the
// label and the gas pressure above and under the pressure line.
// The values are historical, and we could try to pick the over/under
// depending on whether this pressure is higher or lower than the average.
// Right now it's just strictly alternating when you have multiple gas
// pressures.
QFlags<Qt::AlignmentFlag> alignVar = Qt::AlignTop;
QFlags<Qt::AlignmentFlag> align[MAX_CYLINDERS];
double axisRange = (vAxis->maximum() - vAxis->minimum())/1000; // Convert axis pressure range to bar
double axisLog = log10(log10(axisRange));
for (int i = 0, count = dataModel->rowCount(); i < count; i++) {
struct plot_data *entry = dataModel->data().entry + i;
for (int cyl = 0; cyl < MAX_CYLINDERS; cyl++) {
int mbar = GET_PRESSURE(entry, cyl);
if (!mbar)
continue;
if (!seen_cyl[cyl]) {
double value_y_offset, label_y_offset;
// Magic Y offset depending on whether we're aliging
// the top of the text or the bottom of the text to
// the pressure line.
value_y_offset = -0.5;
if (alignVar & Qt::AlignTop) {
label_y_offset = 5 * axisLog;
} else {
label_y_offset = -7 * axisLog;
}
plotPressureValue(mbar, entry->sec, alignVar, value_y_offset);
plotGasValue(mbar, entry->sec, displayed_dive.cylinder[cyl].gasmix, alignVar, label_y_offset);
seen_cyl[cyl] = true;
/* Alternate alignment as we see cylinder use.. */
align[cyl] = alignVar;
alignVar ^= Qt::AlignTop | Qt::AlignBottom;
}
last_pressure[cyl] = mbar;
last_time[cyl] = entry->sec;
}
}
// For each cylinder, on right hand side of profile, write cylinder pressure
for (int cyl = 0; cyl < MAX_CYLINDERS; cyl++) {
if (last_time[cyl]) {
double value_y_offset = -0.5;
plotPressureValue(last_pressure[cyl], last_time[cyl], align[cyl] | Qt::AlignLeft, value_y_offset);
}
}
}
