void bravo_analog_init(void)
{
D("%s\n", __func__);
/* stereo pmic init */
pmic_spkr_set_gain(LEFT_SPKR, SPKR_GAIN_PLUS12DB);
pmic_spkr_set_gain(RIGHT_SPKR, SPKR_GAIN_PLUS12DB);
pmic_spkr_en_right_chan(OFF_CMD);
pmic_spkr_en_left_chan(OFF_CMD);
pmic_spkr_add_right_left_chan(OFF_CMD);
pmic_spkr_en_stereo(OFF_CMD);
pmic_spkr_select_usb_with_hpf_20hz(OFF_CMD);
pmic_spkr_bypass_mux(OFF_CMD);
pmic_spkr_en_hpf(ON_CMD);
pmic_spkr_en_sink_curr_from_ref_volt_cir(OFF_CMD);
pmic_spkr_set_mux_hpf_corner_freq(SPKR_FREQ_0_73KHZ);
pmic_mic_set_volt(MIC_VOLT_1_80V);
pmic_set_speaker_delay(SPKR_DLY_100MS);
gpio_request(BRAVO_AUD_JACKHP_EN, "aud_jackhp_en");
gpio_direction_output(BRAVO_AUD_JACKHP_EN, 1);
gpio_set_value(BRAVO_AUD_JACKHP_EN, 0);
mutex_lock(&bt_sco_lock);
config_gpio_table(bt_sco_disable,
ARRAY_SIZE(bt_sco_disable));
gpio_set_value(BRAVO_BT_PCM_OUT, 0);
mutex_unlock(&bt_sco_lock);
}
void pmic_init(void)
{
s32 dal_rc;
u8 dev_type;
u32 stereo;
dal_rc = CAD_RES_SUCCESS;
dev_type = 0;
if (pmic_spkr_is_stereo_en(&stereo))
pmic_is_stereo = 0;
else
pmic_is_stereo = 1;
D("pmic stereo out val = 0x%08x\n", stereo);
/* Initialize the PMIC MIC and SPKR */
if (pmic_is_stereo) {
pmic_spkr_set_gain(LEFT_SPKR, SPKR_GAIN_PLUS12DB);
pmic_spkr_set_gain(RIGHT_SPKR, SPKR_GAIN_PLUS12DB);
} else
pmic_set_speaker_gain(SPKR_GAIN_PLUS12DB);
pmic_mic_set_volt(MIC_VOLT_1_80V);
pmic_initialized = 1;
}
void analog_init(void)
{
pmic_spkr_set_gain(LEFT_SPKR, SPKR_GAIN_PLUS12DB);
pmic_spkr_set_gain(RIGHT_SPKR, SPKR_GAIN_PLUS12DB);
pmic_mic_set_volt(MIC_VOLT_1_80V);
gpio_direction_output(GPIO_HEADSET_AMP, 1);
gpio_set_value(GPIO_HEADSET_AMP, 0);
}
static int pecan_gpio_earsense_work_func(void)
{
int state;
int gpio_value;
struct snd_set_hook_param_rep hkrep;
struct snd_set_hook_mode_msg hookmsg;
int rc;
struct msm_rpc_endpoint *ept = msm_rpc_connect_compatible(RPC_SND_PROG,
RPC_SND_VERS, 0);
if (IS_ERR(ept)) {
rc = PTR_ERR(ept);
ept = NULL;
printk(KERN_ERR"failed to connect snd svc, error %d\n", rc);
}
hookmsg.args.cb_func = -1;
hookmsg.args.client_data = 0;
gpio_value = gpio_get_value(GPIO_EAR_SENSE);
printk(KERN_INFO"%s: ear sense detected : %s\n", __func__,
gpio_value?"injected":"ejected");
if (gpio_value == EAR_EJECT) {
state = EAR_STATE_EJECT;
pmic_mic_en(0);
hookmsg.args.mode = cpu_to_be32(0);
} else {
state = EAR_STATE_INJECT;
pmic_mic_set_volt(MIC_VOLT_1_80V);
pmic_mic_en(1);
hookmsg.args.mode = cpu_to_be32(1);
}
if(ept) {
rc = msm_rpc_call_reply(ept,
SND_SET_HOOK_MODE_PROC,
&hookmsg, sizeof(hookmsg),&hkrep, sizeof(hkrep), 5 * HZ);
if (rc < 0){
printk(KERN_ERR "%s:rpc err because of %d\n", __func__, rc);
} else {
printk("send success\n");
}
} else {
printk(KERN_ERR "%s:ext_snd is NULL\n", __func__);
}
rc = msm_rpc_close(ept);
if (rc < 0)
printk(KERN_ERR"msm_rpc_close failed\n");
return state;
}
static int debug_mic_set_volt(char *buf, int size)
{
int vol;
int cnt;
cnt = sscanf(buf, "%d", &vol);
if (cnt < 1) {
printk(KERN_ERR "%s: sscanf failed cnt=%d" , __func__, cnt);
return -EINVAL;
}
if (pmic_mic_set_volt(vol) < 0)
return -EFAULT;
return size;
}
void analog_init(void)
{
/* stereo pmic init */
pmic_spkr_set_gain(LEFT_SPKR, SPKR_GAIN_PLUS12DB);
pmic_spkr_set_gain(RIGHT_SPKR, SPKR_GAIN_PLUS12DB);
pmic_mic_set_volt(MIC_VOLT_1_80V);
#if !HUAWEI_HWID(S70)
gpio_direction_output(GPIO_HEADSET_AMP, 1);
gpio_set_value(GPIO_HEADSET_AMP, 0);
#else
/* switch speaker off */
#if HUAWEI_HWID_L2(S7, S7201)
pmic_secure_mpp_control_digital_output(
PM_MPP_12,
PM_MPP__DLOGIC__LVL_VDD,
PM_MPP__DLOGIC_OUT__CTRL_LOW);
#endif
gpio_set_value(GPIO_SPK_PWN, 0); /* 0: MUTE; 1: ON*/
#endif
}
