C++ (Cpp) pmic_power_switcher_set_dvs примеры использования

Пример #1

Файл: dvfs_v2.c Проект: traveller42/linux-2.6.28.mx233-falconwing

void pmic_voltage_init(void)
{
	t_regulator_voltage volt;

	/* Enable 4 mc13783 output voltages */
	pmic_write_reg(REG_ARBITRATION_SWITCHERS, (1 << 5), (1 << 5));

	/* Set mc13783 DVS speed 25mV each 4us */
	pmic_write_reg(REG_SWITCHERS_4, (0 << 6), (3 << 6));

	if (cpu_is_mx31())
		volt.sw1a = SW1A_1_625V;
	else
		volt.sw1a = SW1A_1_425V;

	pmic_power_regulator_set_voltage(SW_SW1A, volt);

	volt.sw1a = SW1A_1_25V;
	pmic_power_switcher_set_dvs(SW_SW1A, volt);

	if (cpu_is_mx32()) {
		volt.sw1a = SW1A_0_975V;
		pmic_power_switcher_set_stby(SW_SW1A, volt);
	}

	volt.sw1b = SW1A_1_25V;
	pmic_power_switcher_set_dvs(SW_SW1B, volt);

	volt.sw1b = SW1A_1_25V;
	pmic_power_switcher_set_stby(SW_SW1B, volt);
}

Пример #2

Файл: dvfs_v2.c Проект: miettal/armadillo420_standard

void pmic_voltage_init(void)
{
	t_regulator_voltage volt;

	/* Enable 4 mc13783 output voltages */
	pmic_write_reg(REG_ARBITRATION_SWITCHERS, 1, (1 << 5));

	/* Enable mc13783 voltage ready signal */
	pmic_write_reg(REG_INTERRUPT_MASK_1, 0, (1 << 11));

	/* Set mc13783 DVS speed 25mV each 4us */
	pmic_write_reg(REG_SWITCHERS_4, 1, (1 << 6));
	pmic_write_reg(REG_SWITCHERS_4, 0, (1 << 7));

	volt.sw1a = SW1A_1_625V;
	pmic_power_regulator_set_voltage(SW_SW1A, volt);

	volt.sw1a = SW1A_1_25V;
	pmic_power_switcher_set_dvs(SW_SW1A, volt);

	volt.sw1b = SW1A_1_25V;
	pmic_power_switcher_set_dvs(SW_SW1B, volt);

	volt.sw1b = SW1A_1_25V;
	pmic_power_switcher_set_stby(SW_SW1B, volt);
}