int main ( int argc, char *argv[] ) {
// behaviour
unsigned char scanonlaunch = 1;
unsigned int interval_secs = 5;
int logall = -1; // -1 means normal logging rules; >=0 means log all!
// misc
int i;
/* iterate across args
*/
for ( i = 1; i < argc; i++ ) {
if ( argv [ i ][ 0 ] == '-' && argv [ i ][ 1 ] == 'd' ) {
//printf ( "Going daemon mode. Silent running.\n" );
g_daemon_mode = 1;
} else if ( isdigit ( argv [ i ][ 0 ] ) ) {
interval_secs = atoi ( argv [ i ] );
} else if ( argv [ i ][ 0 ] == '-' && argv [ i ][ 1 ] == 'n' ) {
scanonlaunch = 0;
} else if ( argv [ i ][ 0 ] == '-' && argv [ i ][ 1 ] == 'l' ) {
if ( isdigit ( argv [ i ][ 2 ] ) ) {
unsigned char x = atoi ( argv [ i ] + 2 );
if ( x >= 0 &&
x < pndn_none )
{
logall = x;
}
} else {
logall = 0;
}
} else {
printf ( "%s [-d] [-l] [##]\n", argv [ 0 ] );
printf ( "-d\tDaemon mode; detach from terminal, chdir to /tmp, suppress output. Optional.\n" );
printf ( "-n\tDo not scan on launch; default is to run a scan for apps when %s is invoked.\n", argv [ 0 ] );
printf ( "-l#\tLog-it; -l is 0-and-up (or all), and -l2 means 2-and-up (not all); l[0-3] for now. Log goes to /tmp/pndnotifyd.log\n" );
printf ( "##\tA numeric value is interpreted as number of seconds between checking for filesystem changes. Default %u.\n",
interval_secs );
printf ( "Signal: HUP the process to force reload of configuration and reset the notifier watch paths\n" );
exit ( 0 );
}
} // for
/* enable logging?
*/
pnd_log_set_pretext ( "pndnotifyd" );
pnd_log_set_flush ( 1 );
if ( logall == -1 ) {
// standard logging; non-daemon versus daemon
if ( g_daemon_mode ) {
// nada
} else {
pnd_log_set_filter ( pndn_rem );
pnd_log_to_stdout();
}
} else {
FILE *f;
f = fopen ( "/tmp/pndnotifyd.log", "w" );
if ( f ) {
pnd_log_set_filter ( logall );
pnd_log_to_stream ( f );
pnd_log ( pndn_rem, "logall mode - logging to /tmp/pndnotifyd.log\n" );
}
if ( logall == pndn_debug ) {
pnd_log_set_buried_logging ( 1 ); // log the shit out of it
pnd_log ( pndn_rem, "logall mode 0 - turned on buried logging\n" );
}
} // logall
pnd_log ( pndn_rem, "%s built %s %s", argv [ 0 ], __DATE__, __TIME__ );
pnd_log ( pndn_rem, "log level starting as %u", pnd_log_get_filter() );
pnd_log ( pndn_rem, "Interval between checks is %u seconds\n", interval_secs );
// check if inotify is awake yet; if not, try waiting for awhile to see if it does
pnd_log ( pndn_rem, "Starting INOTIFY test; should be instant, but may take awhile...\n" );
if ( ! pnd_notify_wait_until_ready ( 120 /* seconds */ ) ) {
pnd_log ( pndn_error, "ERROR: INOTIFY refuses to be useful and quite awhile has passed. Bailing out.\n" );
return ( -1 );
}
pnd_log ( pndn_rem, "INOTIFY seems to be useful, whew.\n" );
// basic daemon set up
if ( g_daemon_mode ) {
// set a CWD somewhere else
#if 0
chdir ( "/tmp" );
#endif
// detach from terminal
if ( ( i = fork() ) < 0 ) {
pnd_log ( pndn_error, "ERROR: Couldn't fork()\n" );
exit ( i );
}
if ( i ) {
exit ( 0 ); // exit parent
}
setsid();
// umask
umask ( 022 ); // emitted files can be rwxr-xr-x
} // set up daemon
// wait for a user to be logged in - we should probably get hupped when a user logs in, so we can handle
// log-out and back in again, with SDs popping in and out between..
pnd_log ( pndn_rem, "Checking to see if a user is logged in\n" );
while ( 1 ) {
if ( pnd_check_login ( g_username, 127 ) ) {
break;
}
pnd_log ( pndn_debug, " No one logged in yet .. spinning.\n" );
sleep ( 2 );
} // spin
pnd_log ( pndn_rem, "Looks like user '%s' is in, continue.\n", g_username );
/* parse configs
*/
consume_configuration();
/* startup
*/
pnd_log ( pndn_rem, "PXML overrides searchpath is '%s'\n", overridespath );
pnd_log ( pndn_rem, "Notify searchpath is '%s'\n", notifypath );
pnd_log ( pndn_rem, "Desktop apps ---------------------------------\n" );
pnd_log ( pndn_rem, "Apps searchpath is '%s'\n", desktop_appspath );
pnd_log ( pndn_rem, ".desktop files emit to '%s'\n", desktop_dotdesktoppath );
pnd_log ( pndn_rem, ".desktop icon files emit to '%s'\n", desktop_iconpath );
pnd_log ( pndn_rem, "Menu apps ---------------------------------\n" );
pnd_log ( pndn_rem, "Apps searchpath is '%s'\n", menu_appspath );
pnd_log ( pndn_rem, ".desktop files emit to '%s'\n", menu_dotdesktoppath );
pnd_log ( pndn_rem, ".desktop icon files emit to '%s'\n", menu_iconpath );
pnd_log ( pndn_rem, ".desktop info files emit to '%s'\n", info_dotdesktoppath ? info_dotdesktoppath : "n/a" );
/* set up signal handler
*/
sigset_t ss;
sigemptyset ( &ss );
struct sigaction siggy;
siggy.sa_handler = sighup_handler;
siggy.sa_mask = ss; /* implicitly blocks the origin signal */
siggy.sa_flags = 0; /* don't need anything */
sigaction ( SIGHUP, &siggy, NULL );
siggy.sa_handler = sigint_handler;
sigaction ( SIGINT, &siggy, NULL );
/* set up notifies
*/
// if we're gong to scan on launch, it'll set things right up and then set up notifications.
// if no scan on launch, we need to set the notif's up now.
//if ( ! scanonlaunch ) {
setup_notifications();
//}
dbh = pnd_dbusnotify_init();
/* daemon main loop
*/
unsigned char watch_inotify, watch_dbus;
while ( 1 ) {
watch_dbus = 0;
watch_inotify = 0;
if ( dbh ) {
watch_dbus = pnd_dbusnotify_rediscover_p ( dbh );
}
if ( ! watch_dbus && nh ) {
watch_inotify = pnd_notify_rediscover_p ( nh );
}
// need to rediscover?
if ( scanonlaunch || watch_inotify || watch_dbus ) {
// by this point, the watched directories have notified us that something of relevent
// has occurred; we should be clever, but we're not, so just re-brute force the
// discovery and spit out .desktop files..
pnd_log ( pndn_rem, "------------------------------------------------------\n" );
pnd_log ( pndn_rem, "System changes detected in dbus or watched paths .. performing re-discover!\n" );
// if this was a forced scan, lets not do that next iteration
if ( scanonlaunch ) {
pnd_log ( pndn_rem, "scan-on-first-launch detected an event\n" );
scanonlaunch = 0;
}
if ( watch_inotify ) {
pnd_log ( pndn_rem, "inotify detected an event\n" );
}
if ( watch_dbus ) {
pnd_log ( pndn_rem, "dbusnotify detected an event\n" );
pnd_notify_shutdown ( nh );
nh = 0;
}
if ( time ( NULL ) - createtime <= 2 ) {
pnd_log ( pndn_rem, "Rediscovery request comes to soon after previous discovery; skipping.\n" );
sleep ( interval_secs );
continue;
}
pnd_log ( pndn_rem, "------------------------------------------------------\n" );
createtime = time ( NULL ); // all 'new' .destops are created at or after this time; prev are old.
/* run the discovery
*/
// do some 'locking'
pnd_log ( pndn_rem, "creating lockfile %s", PNDLOCKNAME );
if ( ! pnd_lock ( PNDLOCKNAME ) ) {
// problem .. well, too bad, we need to do this .. proceed!
}
// scan..
pnd_log ( pndn_rem, " Scanning desktop paths----------------------------\n" );
if ( ! perform_discoveries ( desktop_appspath, overridespath, desktop_dotdesktoppath, desktop_iconpath ) ) {
pnd_log ( pndn_rem, " No applications found in desktop search path\n" );
}
if ( menu_appspath && menu_dotdesktoppath && menu_iconpath ) {
pnd_log ( pndn_rem, " Scanning menu paths----------------------------\n" );
if ( ! perform_discoveries ( menu_appspath, overridespath, menu_dotdesktoppath, menu_iconpath ) ) {
pnd_log ( pndn_rem, " No applications found in menu search path\n" );
}
}
// unlock
pnd_log ( pndn_rem, "clearing lockfile %s", PNDLOCKNAME );
pnd_unlock ( PNDLOCKNAME );
// if we've got a hup script located, lets invoke it
if ( pndhup ) {
pnd_log ( pndn_rem, "Invoking hup script '%s'.\n", pndhup );
pnd_exec_no_wait_1 ( pndhup, NULL );
}
// since its entirely likely new directories have been found (ie: SD with a directory structure was inserted)
// we should re-apply watches to catch all these new directories; ie: user might use on-device browser to
// drop in new applications, or use the shell to juggle them around, or any number of activities.
if ( watch_dbus ) {
setup_notifications();
}
} // need to rediscover?
// lets not eat up all the CPU
// should use an alarm or select() or something -- I mean really, why aren't I putting interval_secs into
// the select() call above in pnd_notify_whatsitcalled()? -- but lets not break this right before release shall we
// NOTE: Oh right, I remember now -- inotify will spam when a card is inserted, and it will not be instantaneoous..
// the events will dribble in over a second. So this sleep is a lame trick that generally works. I really should
// do select(), and then when it returns just spin for a couple seconds slurping up events until no more and a thresh-hold
// time is hit, but this will do for now. I suck.
sleep ( interval_secs );
} // while
/* shutdown
*/
pnd_notify_shutdown ( nh );
pnd_dbusnotify_shutdown ( dbh );
return ( 0 );
}
int main ( int argc, char *argv[] ) {
int i;
int logall = -1; // -1 means normal logging rules; >=0 means log all!
for ( i = 1; i < argc; i++ ) {
if ( argv [ i ][ 0 ] == '-' && argv [ i ][ 1 ] == 'd' ) {
//printf ( "Going daemon mode. Silent running.\n" );
g_daemon_mode = 1;
} else if ( argv [ i ][ 0 ] == '-' && argv [ i ][ 1 ] == 'l' ) {
if ( isdigit ( argv [ i ][ 2 ] ) ) {
unsigned char x = atoi ( argv [ i ] + 2 );
if ( x >= 0 &&
x < pndn_none )
{
logall = x;
}
} else {
logall = 0;
}
} else {
usage ( argv );
exit ( 0 );
}
} // for
/* enable logging?
*/
pnd_log_set_pretext ( "pndevmapperd" );
pnd_log_set_flush ( 1 );
if ( logall == -1 ) {
// standard logging; non-daemon versus daemon
if ( g_daemon_mode ) {
// nada
} else {
pnd_log_set_filter ( pndn_rem );
pnd_log_to_stdout();
}
} else {
FILE *f;
f = fopen ( "/tmp/pndevmapperd.log", "w" );
if ( f ) {
pnd_log_set_filter ( logall );
pnd_log_to_stream ( f );
pnd_log ( pndn_rem, "logall mode - logging to /tmp/pndevmapperd.log\n" );
}
if ( logall == pndn_debug ) {
pnd_log_set_buried_logging ( 1 ); // log the shit out of it
pnd_log ( pndn_rem, "logall mode 0 - turned on buried logging\n" );
}
} // logall
pnd_log ( pndn_rem, "%s built %s %s", argv [ 0 ], __DATE__, __TIME__ );
pnd_log ( pndn_rem, "log level starting as %u", pnd_log_get_filter() );
// basic daemon set up
if ( g_daemon_mode ) {
// set a CWD somewhere else
chdir ( "/tmp" );
// detach from terminal
if ( ( i = fork() ) < 0 ) {
pnd_log ( pndn_error, "ERROR: Couldn't fork()\n" );
exit ( i );
}
if ( i ) {
exit ( 0 ); // exit parent
}
setsid();
// umask
umask ( 022 ); // emitted files can be rwxr-xr-x
} // set up daemon
/* hmm, seems to not like working right after boot.. do we depend on another daemon or
* on giving kernel time to init something, or ... wtf?
* -- lets give the system some time to wake up
*/
{ // delay
// this one works for pndnotifyd, which actually needs INOTIFYH..
//
// check if inotify is awake yet; if not, try waiting for awhile to see if it does
pnd_log ( pndn_rem, "Starting INOTIFY test; should be instant, but may take awhile...\n" );
if ( ! pnd_notify_wait_until_ready ( 120 /* seconds */ ) ) {
pnd_log ( pndn_error, "ERROR: INOTIFY refuses to be useful and quite awhile has passed. Bailing out.\n" );
return ( -1 );
}
pnd_log ( pndn_rem, "INOTIFY seems to be useful, whew.\n" );
// pndnotifyd also waits for user to log in .. pretty excessive, especially since
// what if user wants to close the lid while at the log in screen? for now play the
// odds as thats pretty unliekly usage scenariom but is clearly not acceptible :/
//
// wait for a user to be logged in - we should probably get hupped when a user logs in, so we can handle
// log-out and back in again, with SDs popping in and out between..
pnd_log ( pndn_rem, "Checking to see if a user is logged in\n" );
char tmp_username [ 128 ];
while ( 1 ) {
if ( pnd_check_login ( tmp_username, 127 ) ) {
break;
}
pnd_log ( pndn_debug, " No one logged in yet .. spinning.\n" );
sleep ( 2 );
} // spin
pnd_log ( pndn_rem, "Looks like user '%s' is in, continue.\n", tmp_username );
} // delay
/* inhale config or die trying
*/
char *configpath;
// attempt to fetch a sensible default searchpath for configs
configpath = pnd_conf_query_searchpath();
// attempt to fetch the apps config. since it finds us the runscript
pnd_conf_handle evmaph;
evmaph = pnd_conf_fetch_by_id ( pnd_conf_evmap, configpath );
if ( ! evmaph ) {
// couldn't locate conf, just bail
pnd_log ( pndn_error, "ERROR: Couldn't locate conf file\n" );
exit ( -1 );
}
/* iterate across conf, stocking the event map
*/
void *n = pnd_box_get_head ( evmaph );
while ( n ) {
char *k = pnd_box_get_key ( n );
//printf ( "key %s\n", k );
if ( strncmp ( k, "keys.", 5 ) == 0 ) {
k += 5;
// keys should really push push generic-events onto the table, since they;'re just a special case of them
// to make things easier to read
// figure out which keycode we're talking about
keycode_t *p = keycodes;
while ( p -> keycode != -1 ) {
if ( strcasecmp ( p -> keyname, k ) == 0 ) {
break;
}
p++;
}
if ( p -> keycode != -1 ) {
g_evmap [ g_evmap_max ].key_p = 1; // its a key, not an event
g_evmap [ g_evmap_max ].reqs = p; // note the keycode
// note the script to activate in response
if ( strchr ( n, ' ' ) ) {
char *foo = strdup ( n );
char *t = strchr ( foo, ' ' );
*t = '\0';
g_evmap [ g_evmap_max ].script = foo;
g_evmap [ g_evmap_max ].maxhold = atoi ( t + 1 );
} else {
g_evmap [ g_evmap_max ].script = n;
g_evmap [ g_evmap_max ].maxhold = 0;
}
pnd_log ( pndn_rem, "Registered key %s [%d] to script %s with maxhold %d\n",
p -> keyname, p -> keycode, (char*) n, g_evmap [ g_evmap_max ].maxhold );
g_evmap_max++;
} else {
pnd_log ( pndn_warning, "WARNING! Key '%s' is not handled by pndevmapperd yet! Skipping.", k );
}
} else if ( strncmp ( k, "events.", 7 ) == 0 ) {
k += 7;
// yes, key events could really be defined in this generic sense, and really we could just let people
// put the code and so on right in the conf, but trying to keep it easy on people; maybe should
// add a 'generic' section to conf file and just let folks redefine random events that way
// Really, it'd be nice if the /dev/input/events could spit out useful text, and just use scripts
// to respond without a daemon per se; for that matter, pnd-ls and pnd-map pnd-dotdesktopemitter
// should just exist as scripts rather than daemons, but whose counting?
// figure out which keycode we're talking about
generic_event_t *p = generics;
while ( p -> code != -1 ) {
if ( strcasecmp ( p -> name, k ) == 0 ) {
break;
}
p++;
}
if ( p -> code != -1 ) {
g_evmap [ g_evmap_max ].key_p = 0; // its an event, not a key
g_evmap [ g_evmap_max ].reqs = p; // note the keycode
g_evmap [ g_evmap_max ].script = n; // note the script to activate in response
pnd_log ( pndn_rem, "Registered generic event %s [%d] to script %s\n", p -> name, p -> code, (char*) n );
g_evmap_max++;
} else {
pnd_log ( pndn_warning, "WARNING! Generic event '%s' is not handled by pndevmapperd yet! Skipping.", k );
}
} else if ( strncmp ( k, "pndevmapperd.", 7 ) == 0 ) {
// not consumed here, skip silently
} else if ( strncmp ( k, "battery.", 8 ) == 0 ) {
// not consumed here, skip silently
} else if ( strncmp ( k, "battery_charge.", 15 ) == 0 ) {
// not consumed here, skip silently
} else {
// uhhh
pnd_log ( pndn_warning, "Unknown config key '%s'; skipping.\n", k );
}
n = pnd_box_get_next ( n );
} // while
if ( pnd_conf_get_as_int ( evmaph, "pndevmapperd.loglevel" ) != PND_CONF_BADNUM ) {
pnd_log_set_filter ( pnd_conf_get_as_int ( evmaph, "pndevmapperd.loglevel" ) );
pnd_log ( pndn_rem, "config file causes loglevel to change to %u", pnd_log_get_filter() );
}
if ( pnd_conf_get_as_int ( evmaph, "pndevmapperd.minimum_separation" ) != PND_CONF_BADNUM ) {
g_minimum_separation = pnd_conf_get_as_int ( evmaph, "pndevmapperd.minimum_separation" );
pnd_log ( pndn_rem, "config file causes minimum_separation to change to %u", g_minimum_separation );
}
// battery conf
if ( pnd_conf_get_as_int ( evmaph, "battery.threshold" ) != PND_CONF_BADNUM ) {
b_threshold = pnd_conf_get_as_int ( evmaph, "battery.threshold" );
pnd_log ( pndn_rem, "Battery threshold set to %u", b_threshold );
}
if ( pnd_conf_get_as_int ( evmaph, "battery.check_interval" ) != PND_CONF_BADNUM ) {
b_frequency = pnd_conf_get_as_int ( evmaph, "battery.check_interval" );
pnd_log ( pndn_rem, "Battery check interval set to %u", b_frequency );
}
if ( pnd_conf_get_as_int ( evmaph, "battery.blink_interval" ) != PND_CONF_BADNUM ) {
b_blinkfreq = pnd_conf_get_as_int ( evmaph, "battery.blink_interval" );
pnd_log ( pndn_rem, "Battery blink interval set to %u", b_blinkfreq );
}
if ( pnd_conf_get_as_int ( evmaph, "battery.blink_duration" ) != PND_CONF_BADNUM ) {
b_blinkdur = pnd_conf_get_as_int ( evmaph, "battery.blink_duration" );
pnd_log ( pndn_rem, "Battery blink duration set to %u", b_blinkdur );
}
b_active = 0;
if ( pnd_conf_get_as_int ( evmaph, "battery.shutdown_threshold" ) != PND_CONF_BADNUM ) {
b_shutdown = pnd_conf_get_as_int ( evmaph, "battery.shutdown_threshold" );
pnd_log ( pndn_rem, "Battery shutdown threshold set to %u", b_shutdown );
}
if ( pnd_conf_get_as_int ( evmaph, "battery.shutdown_delay" ) != PND_CONF_BADNUM ) {
b_shutdelay = pnd_conf_get_as_int ( evmaph, "battery.shutdown_delay" );
pnd_log ( pndn_rem, "Battery shutdown delay set to %u", b_shutdelay );
}
if ( pnd_conf_get_as_char ( evmaph, "battery.shutdown_script" ) != NULL ) {
b_shutdown_script = strdup ( pnd_conf_get_as_char ( evmaph, "battery.shutdown_script" ) );
pnd_log ( pndn_rem, "Battery shutdown script set to %s", b_shutdown_script );
}
if ( pnd_conf_get_as_int ( evmaph, "battery_charge.enable" ) != PND_CONF_BADNUM ) {
bc_enable = pnd_conf_get_as_int ( evmaph, "battery_charge.enable" );
pnd_log ( pndn_rem, "Battery charge enable set to %u", bc_enable );
}
if ( pnd_conf_get_as_int ( evmaph, "battery_charge.stop_capacity" ) != PND_CONF_BADNUM ) {
bc_stopcap = pnd_conf_get_as_int ( evmaph, "battery_charge.stop_capacity" );
pnd_log ( pndn_rem, "Battery charge stop capacity set to %u", bc_stopcap );
}
if ( pnd_conf_get_as_int ( evmaph, "battery_charge.stop_current" ) != PND_CONF_BADNUM ) {
bc_stopcur = pnd_conf_get_as_int ( evmaph, "battery_charge.stop_current" );
pnd_log ( pndn_rem, "Battery charge stop current set to %u", bc_stopcur );
}
if ( pnd_conf_get_as_int ( evmaph, "battery_charge.start_capacity" ) != PND_CONF_BADNUM ) {
bc_startcap = pnd_conf_get_as_int ( evmaph, "battery_charge.start_capacity" );
pnd_log ( pndn_rem, "Battery charge start capacity set to %u", bc_startcap );
}
if ( pnd_conf_get_as_char ( evmaph, "battery_charge.device" ) != NULL ) {
bc_charge_device = strdup ( pnd_conf_get_as_char ( evmaph, "battery_charge.device" ) );
pnd_log ( pndn_rem, "Battery charge device set to %s", bc_charge_device );
}
/* do we have anything to do?
*/
if ( ! g_evmap_max ) {
// uuuh, nothing to do?
pnd_log ( pndn_warning, "WARNING! No events configured to watch, so just spinning wheels...\n" );
exit ( -1 );
} // spin
/* set up sigchld -- don't want zombies all over; well, we do, but not process zombies
*/
sigset_t ss;
sigemptyset ( &ss );
struct sigaction siggy;
siggy.sa_handler = sigchld_handler;
siggy.sa_mask = ss; /* implicitly blocks the origin signal */
siggy.sa_flags = SA_RESTART; /* don't need anything */
sigaction ( SIGCHLD, &siggy, NULL );
/* set up the battery level warning timers
*/
siggy.sa_handler = sigalrm_handler;
siggy.sa_mask = ss; /* implicitly blocks the origin signal */
siggy.sa_flags = SA_RESTART; /* don't need anything */
sigaction ( SIGALRM, &siggy, NULL );
if ( set_next_alarm ( b_frequency, 0 ) ) { // check every 'frequency' seconds
pnd_log ( pndn_rem, "Checking for low battery every %u seconds\n", b_frequency );
} else {
pnd_log ( pndn_error, "ERROR: Couldn't set up timer for every %u seconds\n", b_frequency );
}
/* actually try to do something useful
*/
// stolen in part from notaz :)
// try to locate the appropriate devices
int id;
int fds [ 8 ] = { -1, -1, -1, -1, -1, -1, -1, -1 }; // 0 = keypad, 1 = gpio keys
int imaxfd = 0;
for ( id = 0; ; id++ ) {
char fname[64];
char name[256] = { 0, };
int fd;
snprintf ( fname, sizeof ( fname ), "/dev/input/event%i", id );
fd = open ( fname, O_RDONLY );
if ( fd == -1 ) {
break;
}
if ( ioctl (fd, EVIOCGNAME(sizeof(name)), name ) < 0 ) {
name [ 0 ] = '\0';
}
pnd_log ( pndn_rem, "%s maps to %s\n", fname, name );
if ( strcmp ( name, PND_EVDEV_KEYPAD/*"omap_twl4030keypad"*/ ) == 0 ) {
fds [ 0 ] = fd;
} else if ( strcmp ( name, "gpio-keys" ) == 0) {
fds [ 1 ] = fd;
} else if ( strcmp ( name, "AT Translated Set 2 keyboard" ) == 0) { // for vmware, my dev environment
fds [ 0 ] = fd;
} else if ( strcmp ( name, PND_EVDEV_POWER/*"triton2-pwrbutton"*/ ) == 0) {
fds [ 2 ] = fd;
} else if ( strcmp ( name, PND_EVDEV_TS/*"ADS784x Touchscreen"*/ ) == 0) {
fds [ 3 ] = fd;
} else if ( strcmp ( name, PND_EVDEV_NUB1/*"vsense66"*/ ) == 0) {
fds [ 4 ] = fd;
} else if ( strcmp ( name, PND_EVDEV_NUB1/*"vsense67"*/ ) == 0) {
fds [ 5 ] = fd;
} else {
pnd_log ( pndn_rem, "Ignoring unknown device '%s'\n", name );
//fds [ 6 ] = fd;
close ( fd );
fd = -1;
continue;
}
if (imaxfd < fd) imaxfd = fd;
} // for
if ( fds [ 0 ] == -1 ) {
pnd_log ( pndn_warning, "WARNING! Couldn't find keypad device\n" );
}
if ( fds [ 1 ] == -1 ) {
pnd_log ( pndn_warning, "WARNING! couldn't find button device\n" );
}
if ( fds [ 0 ] == -1 && fds [ 1 ] == -1 ) {
pnd_log ( pndn_error, "ERROR! Couldn't find either device!\n" );
//exit ( -2 );
}
/* loop forever, watching for events
*/
while ( 1 ) {
struct input_event ev[64];
unsigned int max_fd = 3; /* imaxfd */
int fd = -1, rd, ret;
fd_set fdset;
// set up fd list
FD_ZERO ( &fdset );
imaxfd = 0;
for (i = 0; i < max_fd /*imaxfd*/; i++) {
if ( fds [ i ] != -1 ) {
FD_SET( fds [ i ], &fdset );
if ( fds [ i ] > imaxfd ) {
imaxfd = fds [ i ];
}
}
}
// figure out if we can block forever, or not
unsigned char do_block = 1;
struct timeval tv;
tv.tv_usec = 0;
tv.tv_sec = 1;
for ( i = i; i < g_evmap_max; i++ ) {
if ( g_evmap [ i ].keydown_time && g_evmap [ i ].maxhold ) {
do_block = 0;
break;
}
}
// wait for fd's or timeout
ret = select ( imaxfd + 1, &fdset, NULL, NULL, do_block ? NULL /* no timeout */ : &tv );
if ( ret == -1 ) {
pnd_log ( pndn_error, "ERROR! select(2) failed with: %s\n", strerror ( errno ) );
continue; // retry!
} else if ( ret == 0 ) { // select returned with timeout (no fd)
// timeout occurred; should only happen when 1 or more keys are being held down and
// they're "maxhold" keys, so we have to see if their timer has passed
unsigned int now = time ( NULL );
for ( i = i; i < g_evmap_max; i++ ) {
if ( g_evmap [ i ].keydown_time &&
g_evmap [ i ].maxhold &&
now - g_evmap [ i ].keydown_time >= g_evmap [ i ].maxhold )
{
keycode_t *k = (keycode_t*) g_evmap [ i ].reqs;
dispatch_key ( k -> keycode, 0 /* key up */ );
}
} // for
} else { // an fd was fiddled with
for ( i = 0; i < max_fd; i++ ) {
if ( fds [ i ] != -1 && FD_ISSET ( fds [ i ], &fdset ) ) {
fd = fds [ i ];
} // fd is set?
} // for
/* buttons or keypad */
rd = read ( fd, ev, sizeof(struct input_event) * 64 );
if ( rd < (int) sizeof(struct input_event) ) {
pnd_log ( pndn_error, "ERROR! read(2) input_event failed with: %s\n", strerror ( errno ) );
break;
}
for (i = 0; i < rd / sizeof(struct input_event); i++ ) {
if ( ev[i].type == EV_SYN ) {
continue;
} else if ( ev[i].type == EV_KEY ) {
// do we even know about this key at all?
keycode_t *p = keycodes;
while ( p -> keycode != -1 ) {
if ( p -> keycode == ev [ i ].code ) {
break;
}
p++;
}
// if we do, hand it off to dispatcher to look up if we actually do something with it
if ( p -> keycode != -1 ) {
if ( logall >= 0 ) {
pnd_log ( pndn_debug, "Key Event: key %s [%d] value %d\n", p -> keyname, p -> keycode, ev [ i ].value );
}
dispatch_key ( p -> keycode, ev [ i ].value );
} else {
if ( logall >= 0 ) {
pnd_log ( pndn_warning, "Unknown Key Event: keycode %d value %d\n", ev [ i ].code, ev [ i ].value );
}
}
} else if ( ev[i].type == EV_SW ) {
// do we even know about this event at all?
generic_event_t *p = generics;
while ( p -> code != -1 ) {
if ( p -> code == ev [ i ].code ) {
break;
}
p++;
}
// if we do, hand it off to dispatcher to look up if we actually do something with it
if ( p -> code != -1 ) {
if ( logall >= 0 ) {
pnd_log ( pndn_debug, "Generic Event: event %s [%d] value %d\n", p -> name, p -> code, ev [ i ].value );
}
dispatch_event ( p -> code, ev [ i ].value );
} else {
if ( logall >= 0 ) {
pnd_log ( pndn_warning, "Unknown Generic Event: code %d value %d\n", ev [ i ].code, ev [ i ].value );
}
}
} else {
pnd_log ( pndn_debug, "DEBUG: Unexpected event type %i received\n", ev[i].type );
continue;
} // type?
} // for
} // an fd was touched
} // while
for (i = 0; i < 2; i++) {
if ( i != 2 && fds [ i ] != -1 ) {
close (fds [ i ] );
}
}
return ( 0 );
} // main