void putintUSART( char *data)
{
while(BusyUSART());
putcUSART(*(data+1));
while(BusyUSART());
putcUSART(*data);
}
void sendCommand(rom char *string) {
while(*string) {
putcUSART(*string);
XLCDPut(*string);
*string++;
}
putcUSART((char)13);
XLCDPut((char)13);
}
void putStrUSART(char *str) {
int i = 0 ;
XLCDClear();
while ( str[i] ) {
XLCDPut(str[i]);
putcUSART(str[i++]);
}
putcUSART((char)13);
}
/******************************************************************************
* Function: void sendReport(void)
*
* PreCondition: None
*
* Input: None
*
* Output: Send report to bleutooth client
*
* Side Effects: Filed ReportData array not used by others
*
* Note: To reduce space get rid of the ReportData array
* (it is probably better).
*****************************************************************************/
void sendReport(void) {
int i = 0;
BYTE *p;
//report back the state of the ivibot register values
ReportData[REP_PORTB] = PORTB; //0
ReportData[REP_PORTD] = PORTD; //1
ReportData[REP_PORTEC] = getPortEC(); //2
ReportData[REP_AD0] = getAD0(); //3
ReportData[REP_AD1] = getAD1(); //4
ReportData[REP_AD2] = getAD2(); //5
ReportData[REP_AD3] = getAD3(); //6
ReportData[REP_PR2] = PR2; //7
ReportData[REP_T2CON] = T2CON; //8
ReportData[REP_CCP1] = CCP1CON; //9
ReportData[REP_CCP2] = CCP2CON; //10
ReportData[REP_CCPR1L] = stored_CCPR1L; //11 CCPR1L stored, it is not allowed to read the counting REG;
ReportData[REP_CCPR2L] = stored_CCPR2L; //12 see CCPR1L above;
ReportData[REP_PROTOCOL] = REP_PROTOCOLVERSION; //13
ReportData[REP_TRISB] = TRISB; //14
ReportData[REP_TRISD] = TRISD; //15
p = (BYTE *) & SystemTime;
ReportData[REP_SYSTEMMSTIMERL] = p[0]; // 16 Byte 0
ReportData[REP_SYSTEMMSTIMERML] = p[1]; // 17 ,, 1
ReportData[REP_SYSTEMMSTIMERMH] = p[2]; // 18 ,, 2
ReportData[REP_SYSTEMMSTIMERH] = p[3]; // 19 ,, 3
p = (BYTE *) & counter0;
ReportData[REP_COUNTER0L] = p[0]; // 20 Byte 0
ReportData[REP_COUNTER0ML] = p[1]; // 21 ,, 1
ReportData[REP_COUNTER0MH] = p[2]; // 22 ,, 2
ReportData[REP_COUNTER0H] = p[3]; // 23 ,, 3
p = (BYTE *) & counter1;
ReportData[REP_COUNTER1L] = p[0]; // 24 Byte 0
ReportData[REP_COUNTER1ML] = p[1]; // 25 ,, 1
ReportData[REP_COUNTER1MH] = p[2]; // 26 ,, 2
ReportData[REP_COUNTER1H] = p[3]; // 27 ,, 3
// Start with ascii ESC followed by 'AT' so the JAVA counterpart can sync
putcUSART((char) 27);
putcUSART((char) 'A');
putcUSART((char) 'T');
for (i = 0; i < 32; i++) { // Java bluetooth client expecte 32 BYTES only 28 used.
//putcUSART('B') ; // debug
//putcUSART((char) i + '0');
putcUSART(ReportData[i]);
}
putcUSART((char) 13); // Send a single newline, end of this report transmission.
}
void main(void) {
int count;
int size;
unsigned int adcValue = 0;
unsigned int adcValueOld = 0;
char buffer[16];
ConfigureOscillator();
InitApp();
lcd_init();
lcd_enable();
lcd_cursor_off();
lcd_test();
lcd_pos(2, 1);
while (1) {
ConvertADC();
while (BusyADC());
adcValue = ReadADC();
if (adcValue != adcValueOld) {
lcd_clear();
//Linha 1
lcd_pos(1, 1);
memset(&buffer[0], 0, sizeof (buffer));
sprintf(&buffer[0], "Step:%.4u %3.1f%%", adcValue, ((float) adcValue / 1023) * 100);
size = (strlen(buffer) > sizeof(buffer)) ? sizeof(buffer) : strlen(buffer);
lcd_write_buffer(buffer, size);
for(count = 0; count < size; count++){
while(BusyUSART());
putcUSART((char)buffer[count]);
}
//Linha 2
lcd_pos(2, 1);
memset(&buffer[0], 0, sizeof (buffer));
sprintf(&buffer[0], "Volts:%1.7fV", (float)adcValue * ((float)5 /1023));
size = (strlen(buffer) > sizeof(buffer)) ? sizeof(buffer) : strlen(buffer);
lcd_write_buffer(buffer, size);
//Variável de controle
adcValueOld = adcValue;
for(count = 0; count < size; count++){
while(BusyUSART());
putcUSART((char)buffer[count]);
}
}
for (count = 0; count < 40; count++) {
__delay_ms(10);
}
}
}
void Tx_Mensagem(unsigned char msg_serial){
/*TXREG=msg_serial;
while(PIR1bits.TXIF==0);*/
while(BusyUSART()); //Aguarda o final da transmissão
putcUSART(msg_serial);
stdout = _H_USART;
}
void putsUSART( char *data)
{
do
{ // Transmit a byte
while(BusyUSART());
putcUSART(*data);
} while( *data++ );
}
void terminalTask() {
if (DataRdyUSART()) {\
while(BusyUSART());
cmd = getcUSART();
while(BusyUSART());
putcUSART(cmd);
}
switch (cmd) {
case '?':
sendTerminalCommandList();
break;
case '1':
terminalSendPString(TERMINAL_RETURN);
terminalSendPString("Measuring carbon...");
measureCarbon();
terminalSendPString(TERMINAL_RETURN);
updateTerminal();
break;
case '2':
terminalSendPString(TERMINAL_RETURN);
terminalSendPString("Measuring salinity...");
measureSalinity();
terminalSendPString(TERMINAL_RETURN);
updateTerminal();
break;
case '3':
terminalSendPString(TERMINAL_RETURN);
terminalSendPString("Measuring flow rate...");
measureFlowRate();
terminalSendPString(TERMINAL_RETURN);
updateTerminal();
break;
case '4':
terminalSendPString(TERMINAL_RETURN);
terminalSendPString("Measuring temperature...");
measureTemperature();
terminalSendPString(TERMINAL_RETURN);
updateTerminal();
break;
case 'c':
updateTerminal();
break;
case 'd':
terminalSendPString(TERMINAL_RETURN);
terminalSendPString("Revealing display");
sendTerminalCommandLine();
break;
case 0xff:
break;
default:
terminalSendPString(TERMINAL_RETURN);
terminalSendPString("Invalid command");
sendTerminalCommandLine();
}
cmd = 0xff;
}
/**
* \brief The PIC18 print function.
*
* C18 has some serious issue when it handles strings, especially constant
* strings. They tend to end up in the rom and thus makes it impossible to
* treat constants strings and other strings in the same way.
*/
void pic18_print(const rom char *msg)
{
while (*msg)
{
while (BusyUSART());
putcUSART(*msg++);
}
while (BusyUSART());
}
void ProcessIO(void)
{
uchar i;
BlinkUSBStatus(); //Blink the LEDs according to the USB device status
// User Application USB tasks
if((USBDeviceState < CONFIGURED_STATE)||(USBSuspendControl==1)) return;
// only check for new USB buffer if the old RS232 buffer is
// empty. This will cause additional USB packets to be NAK'd
// RS232_送信バッファに HostPC から届いたデータをFillする.
if( mDataRdyUSART() < 32 )
if (LastRS232Out == 0) {
LastRS232Out = getsUSBUSART(RS232_Out_Data,64); //until the buffer is free.
if(LastRS232Out > 0) {
// RS232_Out_Data_Rdy = 1; // signal buffer full
RS232cp = 0; // Reset the current position
}
}
#if USART_USE_TX_INTERRUPT // 送信割り込みを使用する.
//USARTが送信可であれば RS232_送信バッファの内容を USARTに １文字送る.
if(LastRS232Out && mTxRdyUSART()) {
// PIR1bits.TXIF = 0; // 送信割り込みフラグ.
PIE1bits.TXIE = 1; // 送信割り込み許可.
}
#else
//USARTが送信可であれば RS232_送信バッファの内容を USARTに １文字送る.
if(LastRS232Out && mTxRdyUSART()) {
putcUSART(RS232_Out_Data[RS232cp]); //１文字送る.
++RS232cp;
if (RS232cp == LastRS232Out) {
// RS232_Out_Data_Rdy = 0;
LastRS232Out=0;
RS232cp=0;
}
}
#endif
//可能なら、RS232_受信バッファの内容をHostPCに送る.
if((USBUSARTIsTxTrfReady()) && (mDataRdyUSART())){
i=0;
while( mDataRdyUSART() ) {
if(i>=CDC_DATA_OUT_EP_SIZE) break;
USB_Out_Buffer[i++]=getcUSART();
}
putUSBUSART(&USB_Out_Buffer[0], i);
NextUSBOut = 0;
}
CDCTxService();
}
void putINT_serial(u16 vcdc) {
unsigned int temp, dvd = 10000;
char i = 0, k = 0;
temp = vcdc;
for (i = 0; i < 5; i++) {
temp = vcdc / dvd;
if (temp) k++;
if (k) putcUSART((char) temp + '0');
vcdc = vcdc - (temp * dvd);
dvd /= 10;
}
}
static void processCy7c4xxFifo(void)
{
unsigned char c;
static unsigned char *cy7c4xx_buf_ptr = InDataPacket;
static unsigned char len = 0;
if (cy7c4xxPull(&c) != 0)
return;
if (len) {
*cy7c4xx_buf_ptr = c;
++cy7c4xx_buf_ptr;
--len;
if (len == 0) {
#if DEBUG
if (usbfifo_debug_operation.dump_fifo_out == 1) {
unsigned char l = cy7c4xx_buf_ptr-InDataPacket, i;
unsigned char b[12];
putrsUSART("FIFO IN: '");
for (i=0;i<l;++i) {
if (i != 0) {
while (BusyUSART());
putcUSART(' ');
}
sprintf(b, "%02x", InDataPacket[i]);
putsUSART(b);
}
sprintf(b, "' len=%3d\r\n", l);
putsUSART(b);
}
if (usbfifo_debug_operation.fifo_loopback == 1) {
unsigned char l = cy7c4xx_buf_ptr-InDataPacket, i; /* length of incoming packet _must_ not exceed the length of outgoing */
fifo9403aPush(l, 1);
for (i=0;i<l;++i)
fifo9403aPush(InDataPacket[i], 1);
}
#endif
/* FIXME: use real ping-pong */
while (USBHandleBusy(UsbInDataHandle)); // should not loop, anyway ...
UsbInDataHandle = USBGenWrite(USBGEN_DATA_EP_NUM, (BYTE*)&InDataPacket, cy7c4xx_buf_ptr-InDataPacket);
while (USBHandleBusy(UsbInDataHandle)); // have to wait here as full ping-pong is not implemented
// and thus we don't want data from FIFO override the data being sent here
cy7c4xx_buf_ptr = InDataPacket;
}
} else {
len = c;
}
}
void sendString(rom char* data, int length) ///Works
{
int i;
unsigned char temp;
Delay10KTCYx(100);
while(BusyUSART());
for(i = 0; i < length; i++)
{
temp = data[i];
putcUSART(temp);
Delay100TCYx(100);
}
}
/*
*------------------------------------------------------------------------------
* void PutrsUART(const rom char *data)
*
* Summary : Send the rom character string through UART
*
* Input : const rom char *data - pointer to the null terminated string rom.
*
* Output : None
*------------------------------------------------------------------------------
*/
void PutrsUART(const rom char *data)
{
TX_EN = 1; //enable the tx control for rs485 communication
Delay10us(1);
do
{
// Wait till the last bit trasmision
while(BusyUSART());
// Transmit a byte
putcUSART(*data++);
} while( *data != '\0');
TX_EN = 0; //disable the tx control for rs485 communication
Delay10us(1);
}
void ProcessIO(void)
{
uchar cnt;
//Blink the LEDs according to the USB device status
BlinkUSBStatus();
// User Application USB tasks
if((USBDeviceState < CONFIGURED_STATE)||(USBSuspendControl==1)) return;
// only check for new USB buffer if the old RS232 buffer is
// empty. This will cause additional USB packets to be NAK'd
// RS232_送信バッファに HostPC から届いたデータをFillする.
if (LastRS232Out == 0) {
LastRS232Out = getsUSBUSART(RS232_Out_Data,64); //until the buffer is free.
if(LastRS232Out > 0) {
RS232cp = 0; // Reset the current position
}
}
for(cnt=0;cnt<32;cnt++) {
//USARTが送信可であれば RS232_送信バッファの内容を USARTに １文字送る.
if(LastRS232Out && mTxRdyUSART()) {
putcUSART(RS232_Out_Data[RS232cp]); //１文字送る.
++RS232cp;
if (RS232cp == LastRS232Out) {
LastRS232Out=0;
RS232cp=0;
}
}
//USARTがデータを受信済みであれば RS232_受信バッファに溜める.
if(mDataRdyUSART()) {
USB_Out_Buffer[NextUSBOut] = getcUSART();
++NextUSBOut;
//USB_Out_Buffer[NextUSBOut] = 0;
}
}
//可能なら、RS232_受信バッファの内容をHostPCに送る.
if((USBUSARTIsTxTrfReady()) && (NextUSBOut > 0)){
putUSBUSART(&USB_Out_Buffer[0], NextUSBOut);
NextUSBOut = 0;
}
CDCTxService();
}
void main (void) {
// Interrupt configs
RCONbits.IPEN = 0; // Deshabilitar prioridades
INTCONbits.PEIE = 1; // Habilitar interrupciones de perifericos
INTCONbits.GIE = 1; // Habilitar interrupciones globales
// Inicializa el USART y lo configura a 8N1, 9600 badios
OpenUSART(
USART_TX_INT_OFF & // TX sin interrupciones
USART_RX_INT_ON & // RX con interrupciones
USART_ASYNCH_MODE & // Modo asincronico
USART_EIGHT_BIT & // 8 bits de datos
USART_CONT_RX & // Recepci?n continua
USART_BRGH_HIGH, 129 // 9600 baudios a 20 mhz (calcular con PicBaudRate)
);
// Init LCD
lcd_init();
lcd_gotoxy(0,2);
lcd_putrs(" Temp: ");
// Safety?
__delay_ms(39);
while (1) {
if (dataFlag != 0) {
dataFlag = 0;
// Convierte el float a string
sprintf(strGrados, "%2.1f,", grados);
if (data == 0xFD) putcUSART(0xFD); // Control
else if (data == 0xFF) putsUSART(strGrados); // Env�a info
}
Medir_Temperatura();
__delay_ms(39);
grados = Leer_DS18B20();
lcd_gotoxy(10,2);
printf("%2.1f", grados);
}
}
void uartbuf_flush(UINT channel) {
unsigned char ch;
if ((channel == SLAVE_TX) || (channel == SLAVE_HPTX)) {
while (!cbuffer_isempty(&Uart[channel])) {
cbuffer_read(&Uart[channel], &ch);
#ifdef DEBUG
printf("(0x%03X) - ", ch);
#else
while (BusyUSART());
putcUSART(ch);
#endif
}
}
}
// Master Mode
void master(void){
while(1){
WriteUSART(27);
putrsUSART (ClrScr);
putrsUSART (Menu1);
while(!DataRdyUSART()); //wait for data
key = ReadUSART(); //read data
putcUSART(key);
switch (key) {
case '1':
{
WriteUSART(27);
putrsUSART (ClrScr);
putrsUSART (Menu1_1);
while(!DataRdyUSART()); //wait for data
key = ReadUSART(); //read data
break;
}
case '2':
{
trackmode();
break;
}
case '3':
{
WriteUSART(27);
putrsUSART (ClrScr);
putrsUSART (Menu1_3);
manmode();
break;
}
case '4':
{
blink();
}
default:
{
putrsUSART (BadKey);
break;
}
}
}
}
/********************************************************************
* Function: void ProcessIO(void)
*
* PreCondition: None
*
* Input: None
*
* Output: None
*
* Side Effects: None
*
* Overview: This function is a place holder for other user
* routines. It is a mixture of both USB and
* non-USB tasks.
*
* Note: None
*******************************************************************/
void ProcessIO(void)
{
//Blink the LEDs according to the USB device status
BlinkUSBStatus();
// User Application USB tasks
if((USBDeviceState < CONFIGURED_STATE)||(USBSuspendControl==1)) return;
// only check for new USB buffer if the old RS232 buffer is
// empty.
// Additional USB packets will be NAK'd
// until the buffer is free.
if (RS232_Out_Data_Rdy == 0)
{
LastRS232Out = getsUSBUSART(RS232_Out_Data,64);
if(LastRS232Out > 0)
{
RS232_Out_Data_Rdy = 1; // signal
//buffer full
RS232cp = 0;// Reset the current position
}
}
if(RS232_Out_Data_Rdy && mTxRdyUSART())
{
putcUSART(RS232_Out_Data[RS232cp]);
++RS232cp;
if (RS232cp == LastRS232Out)
RS232_Out_Data_Rdy = 0;
}
if(mDataRdyUSART())
{
USB_Out_Buffer[NextUSBOut] = getcUSART();
++NextUSBOut;
USB_Out_Buffer[NextUSBOut] = 0;
}
if((mUSBUSARTIsTxTrfReady()) && (NextUSBOut > 0))
{
putUSBUSART(&USB_Out_Buffer[0], NextUSBOut);
NextUSBOut = 0;
}
CDCTxService();
} //end ProcessIO
//Encapsulates the whole testing process
u8 testPart() {
PartSS = 0;
diff = 0;
part_unit = 'm'; //mV by default
pins[0] = 'X';
pins[1] = 'X';
pins[2] = 'X';
//returns the number of conducting directions between all 3 pins
//On return tList, nC, diff, and other variables hold the results
testConduct();
//gets the ID of the part that is most probable
PartSS = getPartSS();
//switches depending on the PartSS value, here is where all the part specific functions all called
part_val = switchPart(PartSS);
#ifdef HAS_SERIAL_PORT
putrsUSART("\n\n");
tListPrint_serial();
putrsUSART("\nPartSS: ");
putINT_serial(PartSS);
putcUSART('\n');
printPart_serial();
#endif
#ifdef HAS_USB_CDC
if (terminalF) {
puts_cdc("\n\n");
tListPrint_cdc();
puts_cdc("\nPartSS: ");
putINT_cdc(PartSS);
putc_cdc('\n');
printPart_cdc();
}
#endif
#ifdef HAS_LCD
printPart_lcd();
#endif
if (PartSS) return 1;
return 0;
}
void printPart_serial() {
putrsUSART(type_descs[PartSS]);
if(PartSS == ERROR || PartSS >= NOID) return;
putINT_serial(part_val);
putcUSART(part_unit);
putcUSART(' ');
putrsUSART("1:");
putcUSART(pins[0]);
putcUSART(' ');
putrsUSART("2:");
putcUSART(pins[1]);
putcUSART(' ');
putrsUSART("3:");
putcUSART(pins[2]);
putcUSART(' ');
}
//TODO:Funcao facilita leitura de inteiros
int getInt(){
int i=0;
int iReturn=0; //inteiro a ser retornado.
while(i<TAM_NUM){ // Atende ao buffer de 5 char
if(PIR1bits.RCIF){ //Checa se foi registrador foi carregado
PIR1bits.RCIF = 0; //Reinicializa Flag de recebimento
cbuffer = RCREG; //Recebe dado
if(cbuffer == 0x0D){ //Checa se foi ENTER
break; //para iteracao
} else {
sbuffer[i++] = cbuffer; //Poe na string para ser convertido
putcUSART(cbuffer); //imprime
while(BusyUSART());
} } }
puts(CRLF); //quebra linha
while(BusyUSART());
iReturn = atoi(sbuffer); //Armazena return
while(i>=0) sbuffer[i--] = '\0';//limpa para uso futuro
return iReturn;
}
/**
* \brief The PIC18 print variable function.
*
* Used for debugging purposes only.
*/
void pic18_print_var(unsigned long var)
{
static unsigned char digits[] =
{
'0', '1', '2', '3',
'4', '5', '6', '7',
'8', '9', 'a', 'b',
'c', 'd', 'e', 'f'
};
unsigned char i, *tmp = (unsigned char*)&var;
tmp += 3;
for (i=0;i<4;i++, tmp--)
{
while (BusyUSART());
putcUSART(digits[*tmp >> 4]);
while (BusyUSART());
putcUSART(digits[*tmp & 0xf]);
}
while (BusyUSART());
}
void uartLoopbackSM(LoopbackData *data){
switch(data->state){
case WAIT_DATA:
if(DataRdyUSART() == 0)
break;
data->dataByte = getcUSART();
data->state = WAIT_TO_TX;
break;
case WAIT_TO_TX:
if(BusyUSART() == 1)
break;
putcUSART(data->dataByte);
data->state = WAIT_DATA;
break;
default:
break;
}
}
void main()
{
unsigned char i2cdata = 0, usartdata = 0;
unsigned char data = 0;
unsigned char str[] = "nom de la toune";
unsigned char AUTO[] = "Auto";
unsigned char NORMAL[] = "Normal";
unsigned char CUTOM1[] = "Custom 1";
unsigned char CUTOM2[] = "Custom 2";
unsigned char CUTOM3[] = "Custom 3";
// Config position
short xposMMODE = 40;
short yposMMODE = 2; //(tranche de 8)
initialisation(); //Initialise tout
LED1=0;
LED2=1;
LED3=1;
while(debut)
{
//chech dsp pour signal autocorrélation puis debut à 1
if (read1==0xFF)
debut=0;
LED1 = 0;
}
LED1 = 1;
//Boucle infinie
while(1)
{
//Affichage de l'écran initial
if(!debut)
{
GLCD_Bitmap(logo, 0, 0, 128, 64);
Delay10KTCYx(0);
Delay10KTCYx(0);
Delay10KTCYx(0);
Delay10KTCYx(0);
Delay10KTCYx(0);
Delay10KTCYx(0);
Delay10KTCYx(0);
Delay10KTCYx(0);
GLCD_ClearScreen();
GLCD_Bitmap(PAUSE, 47, 2, 35, 24);
debut=1;
}
if(last_nombre != nombre) //Si une transition a eu lieu, gérer les menus d'affichage
{
switch(nombre)
{
case 0:
GLCD_Bitmap(ICONES, 0, 6, 128, 16);
GLCD_Bitmap(MODEselec, 1, 6, 68, 16);
GLCD_GoTo(5,7);
if(modeselect == 0)
GLCD_WriteString(AUTO,1);
else if(modeselect == 1)
GLCD_WriteString(NORMAL,1);
else if(modeselect == 2)
GLCD_WriteString(CUTOM1,1);
else if(modeselect == 3)
GLCD_WriteString(CUTOM2,1);
else if(modeselect == 4)
GLCD_WriteString(CUTOM3,1);
if(proj)
GLCD_Bitmap(flecheICO, 75, 5, 8, 8); //SPOT
else
GLCD_Bitmap(flecheNULL, 75, 5, 8, 8); //SPOT
if(strob)
GLCD_Bitmap(flecheICO, 95, 5, 8, 8); //STROB
else
GLCD_Bitmap(flecheNULL, 95, 5, 8, 8); //STROB
if(vu)
GLCD_Bitmap(flecheICO, 115, 5, 8, 8); //BARR
else
GLCD_Bitmap(flecheNULL, 115, 5, 8, 8); //BARR
break;
case 1:
//GLCD_ClearScreen();
GLCD_Bitmap(ICONES, 0, 6, 128, 16);
GLCD_Bitmap(SPOTselec, 70, 6, 18, 16);
GLCD_GoTo(5,7);
if(modeselect == 0)
GLCD_WriteString(AUTO,0);
else if(modeselect == 1)
GLCD_WriteString(NORMAL,0);
else if(modeselect == 2)
GLCD_WriteString(CUTOM1,0);
else if(modeselect == 3)
GLCD_WriteString(CUTOM2,0);
else if(modeselect == 4)
GLCD_WriteString(CUTOM3,0);
if(proj)
GLCD_Bitmap(flecheICO, 75, 5, 8, 8); //SPOT
else
GLCD_Bitmap(flecheNULL, 75, 5, 8, 8); //SPOT
if(strob)
GLCD_Bitmap(flecheICO, 95, 5, 8, 8); //STROB
else
GLCD_Bitmap(flecheNULL, 95, 5, 8, 8); //STROB
if(vu)
GLCD_Bitmap(flecheICO, 115, 5, 8, 8); //BARR
else
GLCD_Bitmap(flecheNULL, 115, 5, 8, 8); //BARR
break;
case 2:
//GLCD_ClearScreen();
GLCD_Bitmap(ICONES, 0, 6, 128, 16);
GLCD_Bitmap(STROBselec, 90, 6, 18, 16);
GLCD_GoTo(5,7);
if(modeselect == 0)
GLCD_WriteString(AUTO,0);
else if(modeselect == 1)
GLCD_WriteString(NORMAL,0);
else if(modeselect == 2)
GLCD_WriteString(CUTOM1,0);
else if(modeselect == 3)
GLCD_WriteString(CUTOM2,0);
else if(modeselect == 4)
GLCD_WriteString(CUTOM3,0);
if(proj)
GLCD_Bitmap(flecheICO, 75, 5, 8, 8); //SPOT
else
GLCD_Bitmap(flecheNULL, 75, 5, 8, 8); //SPOT
if(strob)
GLCD_Bitmap(flecheICO, 95, 5, 8, 8); //STROB
else
GLCD_Bitmap(flecheNULL, 95, 5, 8, 8); //STROB
if(vu)
GLCD_Bitmap(flecheICO, 115, 5, 8, 8); //BARR
else
GLCD_Bitmap(flecheNULL, 115, 5, 8, 8); //BARR
break;
case 3:
//GLCD_ClearScreen();
GLCD_Bitmap(ICONES, 0, 6, 128, 16);
GLCD_Bitmap(BARRselec, 110, 6, 18, 16);
GLCD_GoTo(5,7);
if(modeselect == 0)
GLCD_WriteString(AUTO,0);
else if(modeselect == 1)
GLCD_WriteString(NORMAL,0);
else if(modeselect == 2)
GLCD_WriteString(CUTOM1,0);
else if(modeselect == 3)
GLCD_WriteString(CUTOM2,0);
else if(modeselect == 4)
GLCD_WriteString(CUTOM3,0);
if(proj)
GLCD_Bitmap(flecheICO, 75, 5, 8, 8); //SPOT
else
GLCD_Bitmap(flecheNULL, 75, 5, 8, 8); //SPOT
if(strob)
GLCD_Bitmap(flecheICO, 95, 5, 8, 8); //STROB
else
GLCD_Bitmap(flecheNULL, 95, 5, 8, 8); //STROB
if(vu)
GLCD_Bitmap(flecheICO, 115, 5, 8, 8); //BARR
else
GLCD_Bitmap(flecheNULL, 115, 5, 8, 8); //BARR
break;
case 4:
GLCD_ClearScreen();
GLCD_Bitmap(titreMODE, 0, 0, 128, 16);
GLCD_GoTo(xposMMODE,yposMMODE);
GLCD_WriteString(AUTO,1);
GLCD_GoTo(xposMMODE,yposMMODE+1);
GLCD_WriteString(NORMAL,0);
GLCD_GoTo(xposMMODE,yposMMODE+2);
GLCD_WriteString(CUTOM1,0);
GLCD_GoTo(xposMMODE,yposMMODE+3);
GLCD_WriteString(CUTOM2,0);
GLCD_GoTo(xposMMODE,yposMMODE+4);
GLCD_WriteString(CUTOM3,0);
break;
case 5:
GLCD_ClearScreen();
GLCD_Bitmap(titreMODE, 0, 0, 128, 16);
GLCD_GoTo(xposMMODE,yposMMODE);
GLCD_WriteString(AUTO,0);
GLCD_GoTo(xposMMODE,yposMMODE+1);
GLCD_WriteString(NORMAL,1);
GLCD_GoTo(xposMMODE,yposMMODE+2);
GLCD_WriteString(CUTOM1,0);
GLCD_GoTo(xposMMODE,yposMMODE+3);
GLCD_WriteString(CUTOM2,0);
GLCD_GoTo(xposMMODE,yposMMODE+4);
GLCD_WriteString(CUTOM3,0);
break;
case 6:
GLCD_ClearScreen();
GLCD_Bitmap(titreMODE, 0, 0, 128, 16);
GLCD_GoTo(xposMMODE,yposMMODE);
GLCD_WriteString(AUTO,0);
GLCD_GoTo(xposMMODE,yposMMODE+1);
GLCD_WriteString(NORMAL,0);
GLCD_GoTo(xposMMODE,yposMMODE+2);
GLCD_WriteString(CUTOM1,1);
GLCD_GoTo(xposMMODE,yposMMODE+3);
GLCD_WriteString(CUTOM2,0);
GLCD_GoTo(xposMMODE,yposMMODE+4);
GLCD_WriteString(CUTOM3,0);
break;
case 7:
GLCD_ClearScreen();
GLCD_Bitmap(titreMODE, 0, 0, 128, 16);
GLCD_GoTo(xposMMODE,yposMMODE);
GLCD_WriteString(AUTO,0);
GLCD_GoTo(xposMMODE,yposMMODE+1);
GLCD_WriteString(NORMAL,0);
GLCD_GoTo(xposMMODE,yposMMODE+2);
GLCD_WriteString(CUTOM1,0);
GLCD_GoTo(xposMMODE,yposMMODE+3);
GLCD_WriteString(CUTOM2,1);
GLCD_GoTo(xposMMODE,yposMMODE+4);
GLCD_WriteString(CUTOM3,0);
break;
case 8:
GLCD_ClearScreen();
GLCD_Bitmap(titreMODE, 0, 0, 128, 16);
GLCD_GoTo(xposMMODE,yposMMODE);
GLCD_WriteString(AUTO,0);
GLCD_GoTo(xposMMODE,yposMMODE+1);
GLCD_WriteString(NORMAL,0);
GLCD_GoTo(xposMMODE,yposMMODE+2);
GLCD_WriteString(CUTOM1,0);
GLCD_GoTo(xposMMODE,yposMMODE+3);
GLCD_WriteString(CUTOM2,0);
GLCD_GoTo(xposMMODE,yposMMODE+4);
GLCD_WriteString(CUTOM3,1);
break;
}
last_nombre = nombre;
}
//Si on appuit sur le bouton, activer l'actuateur en question ou changer de menu
if(!ENC_SW)
{
while(!ENC_SW);
Delay10KTCYx(125);
switch(nombre)
{
case 0:
emplacement=2;
nombre=modeselect+4;
last_nombre=0;
break;
case 1:
if(proj)
proj=0;
else
proj=1;
last_nombre=0;
break;
case 2:
if(strob)
strob=0;
else
strob=1;
last_nombre=0;
break;
case 3:
if(vu)
vu=0;
else
vu=1;
last_nombre=0;
break;
case 4:
modeselect=0;
emplacement=1;
nombre=0;
GLCD_ClearScreen();
break;
case 5:
modeselect=1;
emplacement=1;
nombre=0;
GLCD_ClearScreen();
break;
case 6:
modeselect=2;
emplacement=1;
nombre=0;
GLCD_ClearScreen();
break;
case 7:
modeselect=3;
emplacement=1;
nombre=0;
GLCD_ClearScreen();
break;
case 8:
modeselect=4;
emplacement=1;
nombre=0;
GLCD_ClearScreen();
break;
}
}
//Si la pédale est appuyée, changer de on-off
if(!PORTBbits.RB3)
{
while(!PORTBbits.RB3); //Attente que la pédale soit relâché
if(etatplay==0)
{
play=1;
pause=0;
etatplay=1;
}
else
{
pause=1;
last_nombre=9;
etatplay=0;
}
}
// ---------------------------------------------------------------------------------------
// PLAY
if(play)
{
//Affiche play à l'écran
GLCD_Bitmap(PLAY, 47, 2, 35, 24);
//Envoie le mode vers le dsp
euart_out=modeselect;
while(BusyUSART());
putcUSART(euart_out);
Delay10KTCYx(0);
Delay10KTCYx(0);
Delay10KTCYx(0);
GLCD_ClearScreen();
last_nombre=9;
play=1;
}
// ---------------------------------------------------------------------------------------
// PAUSE
if(emplacement == 1)
{
//Si non-pause, afficher les barres graphiques
if(pause==0)
{
graphVU(chan_L,chan_R);
}
//Si pause, afficher l'image du pause
else if(pause==1 && last_nombre!=nombre)
{
GLCD_ClearScreen();
GLCD_Bitmap(PAUSE, 47, 2, 35, 24);
last_nombre=9;
}
//Affiche le nom de la chanson en cours
GLCD_GoTo(2,0);
if(toune==1)
GLCD_WriteString(music_1,0);
else if(toune==2)
GLCD_WriteString(music_2,0);
else if(toune==3)
GLCD_WriteString(music_3,0);
}
// I2C, actualiser la FFT et envoyer les données vers le contrôleur principal
if(flag_i2c)
{
flag_i2c=0;
//Si trame FFT initiale détecté, commence à mettre à jour la FFT
if((read3&0b00010000)==0x10)
{
compteur_fft=1;
}
//Met à jour chaque trame de la FFT
switch(compteur_fft)
{
case 1:
fft1=(read3&0b00001111);
break;
case 2:
fft2=(read3&0b00001111);
break;
case 3:
fft3=(read3&0b00001111);
break;
case 4:
fft4=(read3&0b00001111);
break;
case 5:
fft5=(read3&0b00001111);
break;
case 6:
fft6=(read3&0b00001111);
break;
case 7:
fft7=(read3&0b00001111);
break;
case 8:
fft8=(read3&0b00001111);
break;
case 9:
fft9=(read3&0b00001111);
break;
case 10:
fft10=(read3&0b00001111);
break;
case 11:
fft11=(read3&0b00001111);
break;
case 12:
fft12=(read3&0b00001111);
break;
case 13:
fft13=(read3&0b00001111);
break;
case 14:
fft14=(read3&0b00001111);
break;
case 15:
fft15=(read3&0b00001111);
break;
case 16:
fft16=(read3&0b00001111);
compteur_fft=0;
break;
default:
LED2=1;
break;
}
//Lorsque la FFT est actualiser, la faire afficher à l'écran
if(compteur_fft==1 && (emplacement ==1) && (etatplay==1))
graphFFT(2*fft1,2*fft2,2*fft3,2*fft4,2*fft5,2*fft6,2*fft7,2*fft8,2*fft9,2*fft10,2*fft11,2*fft12,2*fft13,2*fft14,2*fft15,2*fft16);
compteur_fft++;
//Choix de la chanson selon les données reçu
if((read4&0b00001111)==0b00000001)
toune=1;
else if((read4&0b00001111)==0b00000010)
toune=2;
else if((read4&0b00001111)==0b00000011)
toune=3;
//Masques pour savoir les actuateurs à activer
i2c_actuateur=0b00001000;
if(vu && !pause)
i2c_actuateur |= 0b00000001;
if(proj && !pause)
i2c_actuateur |= 0b00000010;
if(strob && !pause)
i2c_actuateur |= 0b00000100;
//Émet I2C uniquement sur nouvelles données
if((last_i2c_1 != read2) || (last_i2c_2 != i2c_actuateur))
{
tst_str[1] = read2;
tst_str[2] = i2c_actuateur;
send_str_I2C(0x40, tst_str);
}
last_i2c_1 = read2;
last_i2c_2 = i2c_actuateur;
}
if(play)
{
while(BusyUSART());
putcUSART(euart_out);
play=0;
}
}
}
/********************************************************************
* Function: void ProcessIO(void)
*
* PreCondition: None
*
* Input: None
*
* Output: None
*
* Side Effects: None
*
* Overview: This function is a place holder for other user
* routines. It is a mixture of both USB and
* non-USB tasks.
*
* Note: None
*******************************************************************/
void ProcessIO(void)
{
//Blink the LEDs according to the USB device status
BlinkUSBStatus();
// User Application USB tasks
if((USBDeviceState < CONFIGURED_STATE)||(USBSuspendControl==1)) return;
if (RS232_Out_Data_Rdy == 0) // only check for new USB buffer if the old RS232 buffer is
{ // empty. This will cause additional USB packets to be NAK'd
LastRS232Out = getsUSBUSART(RS232_Out_Data,64); //until the buffer is free.
if(LastRS232Out > 0)
{
RS232_Out_Data_Rdy = 1; // signal buffer full
RS232cp = 0; // Reset the current position
}
}
//Check if one or more bytes are waiting in the physical UART transmit
//queue. If so, send it out the UART TX pin.
if(RS232_Out_Data_Rdy && mTxRdyUSART())
{
#if defined(USB_CDC_SUPPORT_HARDWARE_FLOW_CONTROL)
//Make sure the receiving UART device is ready to receive data before
//actually sending it.
if(UART_CTS == USB_CDC_CTS_ACTIVE_LEVEL)
{
putcUSART(RS232_Out_Data[RS232cp]);
++RS232cp;
if (RS232cp == LastRS232Out)
RS232_Out_Data_Rdy = 0;
}
#else
//Hardware flow control not being used. Just send the data.
putcUSART(RS232_Out_Data[RS232cp]);
++RS232cp;
if (RS232cp == LastRS232Out)
RS232_Out_Data_Rdy = 0;
#endif
}
//Check if we received a character over the physical UART, and we need
//to buffer it up for eventual transmission to the USB host.
if(mDataRdyUSART() && (NextUSBOut < (CDC_DATA_OUT_EP_SIZE - 1)))
{
USB_Out_Buffer[NextUSBOut] = getcUSART();
++NextUSBOut;
USB_Out_Buffer[NextUSBOut] = 0;
}
#if defined(USB_CDC_SUPPORT_HARDWARE_FLOW_CONTROL)
//Drive RTS pin, to let UART device attached know if it is allowed to
//send more data or not. If the receive buffer is almost full, we
//deassert RTS.
if(NextUSBOut <= (CDC_DATA_OUT_EP_SIZE - 5u))
{
UART_RTS = USB_CDC_RTS_ACTIVE_LEVEL;
}
else
{
UART_RTS = (USB_CDC_RTS_ACTIVE_LEVEL ^ 1);
}
#endif
//Check if any bytes are waiting in the queue to send to the USB host.
//If any bytes are waiting, and the endpoint is available, prepare to
//send the USB packet to the host.
if((USBUSARTIsTxTrfReady()) && (NextUSBOut > 0))
{
putUSBUSART(&USB_Out_Buffer[0], NextUSBOut);
NextUSBOut = 0;
}
CDCTxService();
}//end ProcessIO
void main()
{
int i;
TRISAbits.TRISA0 = 1; //Direciona o pino 0 da porta A como entrada
TRISAbits.TRISA3 = 1; //Direciona o pino 3 da porta A como entrada
TRISCbits.TRISC2 = 0; //Direciona o pino 2 da porta C como saída (Aquecimento)
TRISAbits.TRISA4 = 1; //Direciona o pino 4 da porta A como entrada (B2)
OpenUSART(USART_TX_INT_OFF //desabilita interrupção de transmissão
& USART_RX_INT_OFF //desabilita interrupção de recepção
& USART_ASYNCH_MODE //modo assíncrono
& USART_EIGHT_BIT //transmissão e recepção em 8 bits
& USART_BRGH_HIGH, //Baud Rate em alta velocidade
25); //SPBRG p/ 19200 bps
ADCON2 = 0b10100001; /*ADFM1 = 1 -> Resultado da conversão AD
... justificado à direita
-
****Velocidade de aquisição em 8TAD
ACQT2 = 1
ACQT1 = 0
ACQT0 = 0
****Fonte de clock em Fosc/8
ADCS2 = 0
ADCS1 = 0
ADCS0 = 1*/
ADCON1 = 0b00001011; /* -
-
VCFG1 = 0 -> Vref- = terra
VCFG0 = 1 -> Vref+ = VDD
*****Seleciona os canais AN0 e AN3 como analógicos
PCFG3 = 1
PCFG2 = 1
PCFG1 = 0
PCFG0 = 1*/
msg_inicial();
while(1)
{
while(!DataRdyUSART()); //Aguarda a chegada de um caractere no buffer de recepção
rec[i] = getcUSART(); //recebe o caractere e armazena no índice n_dado da
//matriz n_dado
putcUSART(rec[i]);
Delay10KTCYx(1); //Gera um delay de 5ms
i++;
if(rec[i-1]==0x0D)
{
trata_serial();
i=0;
msg_inicial();
}
}
}
void tListPrint_serial() {
u8 i, t1;
u16 t2;
putrsUSART("\nVcc:");
putINT_serial(VCC);
putrsUSART("\nnC:");
putcUSART(nC + '0');
putrsUSART("\ndiff:");
putcUSART(diff + '0');
for (i = 0; i < 12; i++) {
putrsUSART("\nCP");
putcUSART(i + '1');
putrsUSART(": ");
t1 = (u8) tList[i][0];
putcUSART(t1 + '0');
putrsUSART("->");
t1 = (u8) tList[i][1];
putcUSART(t1 + '0');
putrsUSART(" Value: ");
t2 = tList[i][2];
putINT_serial(t2);
}
for (i = 0; i < 3; i++) {
putrsUSART("\ntIN");
putcUSART(i + '1');
putrsUSART(": ");
putcUSART(tIN[i] + '0');
}
for (i = 0; i < 3; i++) {
putrsUSART("\ntOUT");
putcUSART(i + '1');
putrsUSART(": ");
putcUSART(tOUT[i] + '0');
}
for (i = 0; i < 3; i++) {
putrsUSART("\ntC");
putcUSART(i + '1');
putrsUSART(": ");
putcUSART(tC[i] + '0');
}
for (i = 0; i < 8; i++) {
putrsUSART("\ntN");
putcUSART(i + '1');
putrsUSART(": ");
putcUSART(tN[i] + '0');
}
}
static void processUsbCommands(void)
{
#if defined(USB_POLLING)
// Check bus status and service USB interrupts.
USBDeviceTasks(); // Interrupt or polling method. If using polling, must call
// this function periodically. This function will take care
// of processing and responding to SETUP transactions
// (such as during the enumeration process when you first
// plug in). USB hosts require that USB devices should accept
// and process SETUP packets in a timely fashion. Therefore,
// when using polling, this function should be called
// regularly (such as once every 1.8ms or faster** [see
// inline code comments in usb_device.c for explanation when
// "or faster" applies]) In most cases, the USBDeviceTasks()
// function does not take very long to execute (ex: <100
// instruction cycles) before it returns.
#endif
// Note: The user application should not begin attempting to read/write over the USB
// until after the device has been fully enumerated. After the device is fully
// enumerated, the USBDeviceState will be set to "CONFIGURED_STATE".
if ((USBDeviceState < CONFIGURED_STATE)||(USBSuspendControl==1))
return;
// As the device completes the enumeration process, the UsbCbInitEP() function will
// get called. In this function, we initialize the user application endpoints (in this
// example code, the user application makes use of endpoint 1 IN and endpoint 1 OUT).
// The USBGenRead() function call in the UsbCbInitEP() function initializes endpoint 1 OUT
// and "arms" it so that it can receive a packet of data from the host. Once the endpoint
// has been armed, the host can then send data to it (assuming some kind of application software
// is running on the host, and the application software tries to send data to the USB device).
// If the host sends a packet of data to the endpoint 1 OUT buffer, the hardware of the SIE will
// automatically receive it and store the data at the memory location pointed to when we called
// USBGenRead(). Additionally, the endpoint handle (in this case UsbOutCmdHandle) will indicate
// that the endpoint is no longer busy. At this point, it is safe for this firmware to begin reading
// from the endpoint buffer, and processing the data. In this example, we have implemented a few very
// simple commands. For example, if the host sends a packet of data to the endpoint 1 OUT buffer, with the
// first byte = 0x80, this is being used as a command to indicate that the firmware should "Toggle LED(s)".
if (!USBHandleBusy(UsbOutCmdHandle)) { // Check if the endpoint has received any data from the host.
#if DEBUG
unsigned char l = USBHandleGetLength(UsbOutCmdHandle);
if (usbfifo_debug_operation.dump_usb_out == 1) {
unsigned char b[16];
unsigned char i;
putrsUSART("USB OUT: '");
for (i=0;i<l;++i) {
if (i != 0) {
while (BusyUSART());
putcUSART(' ');
}
sprintf(b, "%02x", OutCmdPacket[i]);
putsUSART(b);
}
sprintf(b, "' len=%3d\r\n", l);
putsUSART(b);
}
if (usbfifo_debug_operation.usb_loopback == 1) {
unsigned char i;
// Now check to make sure no previous attempts to send data to the host are still pending. If any attemps are still
// pending, we do not want to write to the endpoint 1 IN buffer again, until the previous transaction is complete.
// Otherwise the unsent data waiting in the buffer will get overwritten and will result in unexpected behavior.
while (USBHandleBusy(UsbInCmdHandle));
for (i=0;i<l;++i)
InCmdPacket[i] = OutCmdPacket[i];
// The endpoint was not "busy", therefore it is safe to write to the buffer and arm the endpoint.
// The USBGenWrite() function call "arms" the endpoint (and makes the handle indicate the endpoint is busy).
// Once armed, the data will be automatically sent to the host (in hardware by the SIE) the next time the
// host polls the endpoint. Once the data is successfully sent, the handle (in this case UsbInCmdHandle)
// will indicate the the endpoint is no longer busy.
UsbInCmdHandle = USBGenWrite(USBGEN_CMD_EP_NUM, (BYTE*)&InCmdPacket, l);
}
#endif
switch (OutCmdPacket[0]) {
#if DEBUG
case USBFIFO_CMD_DUMP_USB_OUT:
usbfifo_debug_operation.dump_usb_out ^= 1;
break;
case USBFIFO_CMD_DUMP_FIFO_OUT:
usbfifo_debug_operation.dump_fifo_out ^= 1;
break;
case USBFIFO_CMD_FIFO_LOOPBACK:
usbfifo_debug_operation.fifo_loopback ^= 1;
break;
case USBFIFO_CMD_USB_LOOPBACK:
usbfifo_debug_operation.usb_loopback ^= 1;
break;
#endif
default:
{
unsigned char b[8];
putrsUSART("Unexpected cmd=");
sprintf(b, "0x%2X\r\n", OutCmdPacket[0]);
putsUSART(b);
}
break;
}
// Re-arm the OUT endpoint for the next packet:
// The USBGenRead() function call "arms" the endpoint (and makes it "busy"). If the endpoint is armed, the SIE will
// automatically accept data from the host, if the host tries to send a packet of data to the endpoint. Once a data
// packet addressed to this endpoint is received from the host, the endpoint will no longer be busy, and the application
// can read the data which will be sitting in the buffer.
UsbOutCmdHandle = USBGenRead(USBGEN_CMD_EP_NUM, (BYTE*)&OutCmdPacket, USBGEN_EP_SIZE);
}
if (!USBHandleBusy(UsbOutDataHandle)) {
#if USBGEN_EP_SIZE > FIFO_9403A_MAX_MSG_LEN
#error "Transfer of more than FIFO_9403A_MAX_MSG_LEN not implemented"
#endif
unsigned char l = USBHandleGetLength(UsbOutDataHandle);
unsigned char i;
#if DEBUG
if (usbfifo_debug_operation.dump_usb_out == 1) {
unsigned char b[16];
putrsUSART("USB OUT: '");
for (i=0;i<l;++i) {
if (i != 0) {
while (BusyUSART());
putcUSART(' ');
}
sprintf(b, "%02x", OutDataPacket[i]);
}
sprintf(b, "' len=%3d\r\n", l);
putsUSART(b);
}
if (usbfifo_debug_operation.usb_loopback == 1) {
while (USBHandleBusy(UsbInDataHandle)); // ensure that FIFO data left the device
for (i=0;i<l;++i)
InDataPacket[i] = OutDataPacket[i];
/* FIXME: use real ping-pong */
UsbInDataHandle = USBGenWrite(USBGEN_DATA_EP_NUM, (BYTE*)&InDataPacket, l);
while (USBHandleBusy(UsbInDataHandle)); // have to wait here as full ping-pong is not implemented
// and thus we don't want data from FIFO override the data being sent here
}
#endif
fifo9403aPush(l, 1);
for (i=0;i<l;++i)
fifo9403aPush(OutDataPacket[i], 1);
UsbOutDataHandle = USBGenRead(USBGEN_DATA_EP_NUM, (BYTE*)&OutDataPacket, USBGEN_EP_SIZE);
}
}
