void __init config_q40(void)
{
mach_sched_init = q40_sched_init;
mach_init_IRQ = q40_init_IRQ;
arch_gettimeoffset = q40_gettimeoffset;
mach_hwclk = q40_hwclk;
mach_get_ss = q40_get_ss;
mach_get_rtc_pll = q40_get_rtc_pll;
mach_set_rtc_pll = q40_set_rtc_pll;
mach_set_clock_mmss = q40_set_clock_mmss;
mach_reset = q40_reset;
mach_get_model = q40_get_model;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
mach_beep = q40_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = q40_heartbeat;
#endif
mach_halt = q40_halt;
/* disable a few things that SMSQ might have left enabled */
q40_disable_irqs();
/* no DMA at all, but ide-scsi requires it.. make sure
* all physical RAM fits into the boundary - otherwise
* allocator may play costly and useless tricks */
mach_max_dma_address = 1024*1024*1024;
}
void __init config_q40(void)
{
mach_sched_init = q40_sched_init;
mach_init_IRQ = q40_init_IRQ;
mach_gettimeoffset = q40_gettimeoffset;
mach_hwclk = q40_hwclk;
mach_get_ss = q40_get_ss;
mach_get_rtc_pll = q40_get_rtc_pll;
mach_set_rtc_pll = q40_set_rtc_pll;
mach_set_clock_mmss = q40_set_clock_mmss;
mach_reset = q40_reset;
mach_get_model = q40_get_model;
#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE)
mach_beep = q40_mksound;
#endif
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = q40_heartbeat;
#endif
mach_halt = q40_halt;
q40_disable_irqs();
mach_max_dma_address = 1024*1024*1024;
}
void __init config_q40(void)
{
mach_sched_init = q40_sched_init;
mach_keyb_init = q40kbd_init_hw;
mach_kbd_translate = q40kbd_translate;
mach_init_IRQ = q40_init_IRQ;
mach_gettimeoffset = q40_gettimeoffset;
mach_gettod = q40_gettod;
mach_hwclk = q40_hwclk;
mach_set_clock_mmss = q40_set_clock_mmss;
mach_reset = q40_reset;
mach_free_irq = q40_free_irq;
mach_process_int = q40_process_int;
mach_get_irq_list = q40_get_irq_list;
mach_request_irq = q40_request_irq;
enable_irq = q40_enable_irq;
disable_irq = q40_disable_irq;
mach_default_handler = &q40_sys_default_handler;
mach_get_model = q40_get_model;
mach_get_hardware_list = q40_get_hardware_list;
kd_mksound = q40_mksound;
#ifdef CONFIG_MAGIC_SYSRQ
mach_sysrq_key = 0x54;
#endif
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = q40_heartbeat;
#endif
mach_halt = q40_halt;
conswitchp = &dummy_con;
/* disable a few things that SMSQ might have left enabled */
q40_disable_irqs();
/* no DMA at all, but ide-scsi requires it.. make sure
* all physical RAM fits into the boundary - otherwise
* allocator may play costly and useless tricks */
mach_max_dma_address = 1024*1024*1024;
/* useful for early debugging stages - writes kernel messages into SRAM */
if (!strncmp( m68k_debug_device,"mem",3 ))
{
/*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/
_cpleft=2000-((long)q40_mem_cptr-0xff020000)/4;
q40_console_driver.write = q40_mem_console_write;
register_console(&q40_console_driver);
}
}
