void to_uni(SIG_ENTITY *sig,void *msg,int size)
{
if (q_open(&in_dsc,msg,size) < 0) {
abort_call(sig,msg,size);
return;
}
process_uni(sig,msg);
if (q_close(&in_dsc) < 0)
diag(COMPONENT,DIAG_ERROR,"q_close returned <0 in to_uni");
}
INT4 WriteTopo (void)
/***********************************************************************
*
*_Title WriteTopo - Write final topography solution to file
*
*_DESC Write final topography solution to file
*
*_HIST June 13 2002 Janet Barrett, Original version
* July 29 2002 JB, Replaced ioct with ioct1 to prevent the image
* from being reoriented
*_END
************************************************************************/
{
INT4 limits[3][2];
INT4 nvals,slen,ival;
FLOAT4 rval;
INT4 ret;
INT4 ioct1;
topo.fileid = 0;
topo.naxes = 3;
topo.order = 1;
topo.core_dims[0] = ins;
topo.suffix_dims[0] = 0;
(void) strcpy(topo.axnames[0],"SAMPLE");
topo.core_dims[1] = inl;
topo.suffix_dims[1] = 0;
(void) strcpy(topo.axnames[1],"LINE");
topo.core_dims[2] = 1;
topo.suffix_dims[2] = 0;
(void) strcpy(topo.axnames[2],"BAND");
topo.pixel_type = 3;
topo.scale[0] = 0.0;
topo.scale[1] = 1.0;
(void) u_type_keys(topo.pixel_type,&topo.item_bytes,
topo.core_type,sizeof(topo.core_type),&ret);
if (ret) {
strcpy(C_MSG->pcpmsg,"Error creating output topo file.");
pcpmessage(C_MSG->pcpmsg);
return(-1);
}
(void) q_set_sys_keys(&topo.fileid,topo.naxes,topo.order,
topo.core_dims,topo.suffix_dims,(CHAR *)topo.axnames,
sizeof(topo.axnames[0]),topo.item_bytes,
topo.core_type,topo.scale,&ret);
if (ret) {
strcpy(C_MSG->pcpmsg,"Error creating output topo file.");
pcpmessage(C_MSG->pcpmsg);
return(-2);
}
(void) q_open(&topo.fileid,fid,topofile,3,0," ",0,0,1,0,&ret);
if (ret) {
strcpy(C_MSG->pcpmsg,"Error opening output topo file.");
pcpmessage(C_MSG->pcpmsg);
return(-3);
}
ioct1 = 1;
(void) zlineout(&cdum[n2],nx,ny,&cdum[n3],ins,inl,scale,ioct1,cosemi);
limits[0][0] = 1;
limits[0][1] = ins;
limits[1][0] = 1;
limits[1][1] = inl;
limits[2][0] = 1;
limits[2][1] = 1;
(void) q_lio_cbrick(topo.fileid,2,limits,(void *)(&cdum[n3]),&ret);
if (ret) {
strcpy(C_MSG->pcpmsg,"Error writing data to output topo file.");
pcpmessage(C_MSG->pcpmsg);
return(-5);
}
(void) q_close(topo.fileid,1,&ret);
if (ret) {
strcpy(C_MSG->pcpmsg,"Error closing output topo file.");
pcpmessage(C_MSG->pcpmsg);
return(-6);
}
return(0);
}
INT4 InitPcsi (void)
/***********************************************************************
*
*_Title InitPcsi - Initialize pcsi parameters
*
*_DESC Initialize pcsi parameters
*
*_HIST Mar 9 2003 Janet Barrett, Created by modifying the initpcp
* subroutine used by the pc2d program.
* Jul 9 2003 JB - Fixed a problem with handling Level 1 labels
* in a Level 2 image.
* Jan 11 2010 JB - The both.level element is not being set by
* calls to lev1_init or lev2_init. This was fixed by
* using the spi_level value in place of it.
*
*_END
************************************************************************/
{
BOOLEAN levels,frame;
INT4 level,spi_level;
INT4 lzin,llog,lnote;
INT4 length,icount,ret;
INT4 naxes,order,core_size[3],suf_size[3];
INT4 issi,isli;
INT4 iesi,ieli;
INT4 iflag,jflag;
INT4 lpos;
INT4 icard;
INT4 ccont[3];
INT4 scont[3];
INT4 dflag;
INT4 icountx,icounty;
INT4 levgroups;
INT4 found;
INT4 i,j;
int (*p)();
FLOAT4 dzxm,dzym;
FLOAT4 z01,z02,z03,z04;
FLOAT4 xsinci,xlinci;
FLOAT4 dzdip;
FLOAT4 arg;
FLOAT4 si0;
FLOAT4 se0;
FLOAT4 bclipin;
FLOAT4 db1,db2;
FLOAT4 cardaz;
FLOAT4 delaza,delazb;
FLOAT4 xcenter,ycenter;
FLOAT4 clat,clon;
FLOAT8 azi;
FLOAT8 lat,lon;
FLOAT8 inc,emi,pha;
FLOAT8 scaz,sunaz;
FLOAT8 ssclat,ssclon;
FLOAT8 ssunlat,ssunlon;
FLOAT8 radii[3];
FLOAT8 slantrange;
CHAR axis_name[3][MAXLITLEN+1];
CHAR item_type[MAXLITLEN+1];
CHAR prmname[30];
CHAR tmpstr[256];
CHAR planet[11];
CHAR sfrom[136];
CHAR scan_sc[NUMOFSCAN][LEV_SPACECRAFT_NAME_SIZE] =
{"MARS_GLOBAL_SURVEYOR",
"MARS_GLOBAL_SURVEYOR",
"MARS_ODYSSEY"};
CHAR scan_inst[NUMOFSCAN][LEV_INSTRUMENT_NAME_SIZE] =
{"MOC_NA_A",
"MOC_WA_A",
"THEMIS_IR"};
CHAR frame_sc[NUMOFFRAME][LEV_SPACECRAFT_NAME_SIZE] =
{"GALILEO_1",
"VIKING_ORBITER_1",
"VIKING_ORBITER_1",
"VIKING_ORBITER_2",
"VIKING_ORBITER_2",
"MARS_ODYSSEY",
"VOYAGER_1",
"VOYAGER_1",
"VOYAGER_2",
"VOYAGER_2"};
/* "CASSINI",
"LUNAR_ORBITER_4"};*/
CHAR frame_inst[NUMOFFRAME][LEV_INSTRUMENT_NAME_SIZE] =
{"SSI",
"VISUAL_IMAGING_SUBSYSTEM_CAMERA_A",
"VISUAL_IMAGING_SUBSYSTEM_CAMERA_B",
"VISUAL_IMAGING_SUBSYSTEM_CAMERA_A",
"VISUAL_IMAGING_SUBSYSTEM_CAMERA_B",
"THEMIS_VIS",
"WA",
"NA",
"WA",
"NA"};
/* "VIMS",
"24_INCH_FOCAL_LENGTH_CAMERA"};*/
FLOAT8 frame_flinpix[NUMOFFRAME] =
{98455.811,
40323.83,
40328.08,
40341.85,
40298.585,
22222.222,
16989.138,
127248.26,
17209.598,
127528.17};
LevData data,tmpdata;
Lev both;
FLOAT8 sampres,lineres,azres,sres;
INT4 PcsiFirstGuess (void);
CHAR obj_name[5]="QUBE";
CHAR grp_name[1] = "";
CHAR grp2_name[21]="IMAGE_MAP_PROJECTION";
INT4 mulpht;
INT4 whcnt,hg1cnt,hg2cnt,hhcnt,b0cnt,thetacnt,bhcnt,chcnt,kcnt,lcnt;
/******************************************************************************
* Get input and output file parameters from TAE
******************************************************************************/
strcpy(prmname,"TO");
u_get_file_parm("TO",1,(CHAR *)topofile,sizeof(topofile),&length,&icount,&ret);
if (ret) goto user_parameter_error;
if (icount <= 0 || strlen(topofile) == 0) goto to_file_error;
(void) u_strtrim(topofile,topofile);
if (strlen(topofile) == 0) goto to_file_error;
if (u_file_exist(topofile)) goto to_file_exist;
if (strncmp(&(topofile[strlen(topofile)-1]),"/",1) == 0) goto to_file_error;
(void) u_ver_flspec(topofile,"cub",topofile,sizeof(topofile),&ret);
if (ret) goto to_file_invalid;
strcpy(prmname,"ZOUT");
u_get_file_parm("ZOUT",1,(CHAR *)zoutfile,sizeof(zoutfile),&length,&icount,&ret);
if (ret) goto user_parameter_error;
if (icount <= 0 || strlen(zoutfile) == 0) {
dozout = FALSE;
} else {
(void) u_strtrim(zoutfile,zoutfile);
(void) u_ver_flspec(zoutfile,"cub",zoutfile,sizeof(zoutfile),&ret);
if (ret) goto flspec_error;
if (u_file_exist(zoutfile)) {
if (remove(zoutfile)) goto zout_remove_error;
}
dozout = TRUE;
}
(void) xctae_files(zin,sizeof(zin),&lzin,&usezin,&usedatum,logfile,
sizeof(logfile),&llog,note,sizeof(note),&lnote);
/******************************************************************************
* Get subcube specifiers
******************************************************************************/
strcpy(prmname,"SFROM");
u_get_str_parm("SFROM",1,(CHAR *)sfrom,sizeof(sfrom),&length,&icount,&ret);
if (ret) goto user_parameter_error;
if (icount <= 0) (void) strcpy(sfrom," ");
/******************************************************************************
* Open the FROM file and get information
******************************************************************************/
strcpy(prmname,"FROM");
u_get_file_parm("FROM",1,(CHAR *)from,sizeof(from),&length,&icount,&ret);
if (ret) goto user_parameter_error;
q_open(&fid,0,from,READ_ONLY,0,"",0,0,1,0,&ret);
if (ret) goto cube_open_error;
q_check_std(fid,&ret);
if (ret) goto invalid_cube;
q_get_sys_keys(fid,1,&naxes,&order,core_size,suf_size,
(char *)axis_name,sizeof(axis_name[0]),&image_bytes,
item_type,sizeof(item_type),image_scale,&ret);
if (ret) goto bad_sys_keys;
/******************************************************************************
* Parse the SFROM subcube specification and apply to the FROM file and
* then read system keywords again to reflect the virtual cube
******************************************************************************/
(void) u_parse_isub(fid,sfrom,1,core_size,suf_size,ccont,scont,&ret);
if (ret) goto parse_sfrom_error;
(void) q_set_virtual(fid,&ret);
if (ret) goto sfrom_error;
q_get_sys_keys(fid,1,&naxes,&order,core_size,suf_size,
(char *)axis_name,sizeof(axis_name[0]),&image_bytes,
item_type,sizeof(item_type),image_scale,&ret);
if (ret) goto bad_sys_keys;
ins = core_size[0];
inl = core_size[1];
/******************************************************************************
* Set the variables describing the FROM subcube
******************************************************************************/
u_get_isub_desc(fid,"SAMPLE",&issi,&iesi,&xsinci,&dflag,&ret);
if (ret) goto bad_subsamp;
if (dflag != 1) goto bad_subsamp;
u_get_isub_desc(fid,"LINE",&isli,&ieli,&xlinci,&dflag,&ret);
if (ret) goto bad_subline;
if (dflag != 1) goto bad_subline;
if (xsinci != xlinci) goto inc_error; /* Need to be equal or
map scale will not be accurate */
/******************************************************************************
* Set center of virtual subcube
******************************************************************************/
xcenter = 0.5*(ins+1);
ycenter = 0.5*(inl+1);
/******************************************************************************
* Get photoclinometry parameters from TAE
******************************************************************************/
strcpy(prmname,"MAXMEM");
u_get_int_parm("MAXMEM",1,&C_MEM3->nmax,&icount,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"DNATM");
u_get_real_parm("DNATM",1,1,6,&C_DNORM->dnatm,&icount,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"DNDATUM");
u_get_real_parm("DNDATUM",1,1,6,&dndatum,&icount,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"DATUMTYP");
u_get_int_parm("DATUMTYP",1,&C_DATUM2->datumtyp,&icount,&ret);
if (ret) goto user_parameter_error;
nucenter = FALSE; /* Reset to True if X,Y inputs given */
strcpy(prmname,"X");
u_get_dbl_parm("X",1,1,6,&x,&icountx,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"Y");
u_get_dbl_parm("Y",1,1,6,&y,&icounty,&ret);
if (ret) goto user_parameter_error;
if ((icountx >= 1) && (icounty >= 1)) nucenter = TRUE;
strcpy(prmname,"DISTORTD");
u_get_str_parm("DISTORTD",1,(CHAR *)tmpstr,sizeof(tmpstr),&length,&icount,&ret);
if (ret) goto user_parameter_error;
distortd = TRUE;
if (strncmp(tmpstr,"NO",1) == 0)
distortd = FALSE;
strcpy(prmname,"METHOD");
u_get_str_parm("METHOD",1,(CHAR *)method,sizeof(method),&length,&icount,&ret);
if (ret) goto user_parameter_error;
if (strncmp(method,"SOR",3) == 0) {
sordir = 0;
} else if (strncmp(method,"DIR",3) == 0) {
sordir = 1;
} else {
sordir = 2;
}
strcpy(prmname,"PHOFUNC");
u_get_str_parm("PHOFUNC",1,(CHAR *)C_PPARS4->phofunc,sizeof(C_PPARS4->phofunc),
&length,&icount,&ret);
if (ret) goto user_parameter_error;
C_PPARS1->piopt = 0;
if (strncmp(C_PPARS4->phofunc,"HAPLEG",6) == 0)
C_PPARS1->piopt = 1;
if (strncmp(C_PPARS4->phofunc,"HAPL_S",6) == 0)
C_PPARS1->piopt = 1;
C_PPARS3->hapke = FALSE;
if (strncmp(C_PPARS4->phofunc,"H",1) == 0)
C_PPARS3->hapke = TRUE;
strcpy(prmname,"WH");
u_get_real_parm("WH",1,1,6,&C_PPARS5->pwh,&whcnt,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"HG1");
u_get_real_parm("HG1",1,1,6,&C_PPARS5->phg1,&hg1cnt,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"HG2");
u_get_real_parm("HG2",1,1,6,&C_PPARS5->phg2,&hg2cnt,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"HH");
u_get_real_parm("HH",1,1,6,&C_PPARS5->phh,&hhcnt,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"B0");
u_get_real_parm("B0",1,1,6,&C_PPARS5->pb0,&b0cnt,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"THETA");
u_get_real_parm("THETA",1,1,6,&C_PPARS5->ptheta,&thetacnt,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"BH");
u_get_real_parm("BH",1,1,6,&C_PPARS5->pbh,&bhcnt,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"CH");
u_get_real_parm("CH",1,1,6,&C_PPARS5->pch,&chcnt,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"K");
u_get_real_parm("K",1,1,6,&C_PPARS2->pex,&kcnt,&ret);
if (ret) goto user_parameter_error;
strcpy(prmname,"L");
u_get_real_parm("L",1,1,6,&C_PPARS2->pl2,&lcnt,&ret);
if (ret) goto user_parameter_error;
if (strncmp(C_PPARS4->phofunc,"HAPHEN",6) == 0) {
if (whcnt < 1 || thetacnt < 1 || b0cnt < 1 || hhcnt < 1 ||
hg1cnt < 1 || hg2cnt < 1) goto haphen_error;
} else if (strncmp(C_PPARS4->phofunc,"HAPLEG",6) == 0) {
if (whcnt < 1 || thetacnt < 1 || b0cnt < 1 || hhcnt < 1 ||
bhcnt < 1 || chcnt < 1) goto hapleg_error;
} else if (strncmp(C_PPARS4->phofunc,"HAPH_S",6) == 0) {
if (whcnt < 1 || hg1cnt < 1 || hg2cnt < 1) goto haph_s_error;
} else if (strncmp(C_PPARS4->phofunc,"HAPL_S",6) == 0) {
if (whcnt < 1 || bhcnt < 1 || chcnt < 1) goto hapl_s_error;
} else if (strncmp(C_PPARS4->phofunc,"LAMBER",6) == 0) {
C_PPARS2->pex = 1.0;
C_PPARS2->pl2 = 0.0;
} else if (strncmp(C_PPARS4->phofunc,"LOMSEL",6) == 0) {
C_PPARS2->pex = 1.0;
C_PPARS2->pl2 = 1.0;
} else if (strncmp(C_PPARS4->phofunc,"MIN",3) == 0) {
C_PPARS2->pl2 = 0.0;
if (kcnt < 1) goto min_error;
} else if (strncmp(C_PPARS4->phofunc,"LUNLAM",6) == 0) {
C_PPARS2->pex = 1.0;
if (lcnt < 1) goto lunlam_error;
}
/******************************************************************************
* Evaluate default (center) location in image if needed. This default is in
* ALL cases now the center of the virtual subcube, transferred to full cube.
******************************************************************************/
if (!nucenter) {
x = (FLOAT8) (issi) + (xcenter-1.0) * xsinci;
y = (FLOAT8) (isli) + (ycenter-1.0) * xlinci;
}
/******************************************************************************
* Check for the 3 levels Level 1 keyword groups (ISIS_INSTRUMENT,
* ISIS_GEOMETRY, ISIS_TARGET)
******************************************************************************/
levgroups = 0;
(void) p_check_key(fid,"QUBE","ISIS_INSTRUMENT","",&icount,&ret);
if (!ret) levgroups = levgroups + 1;
(void) p_check_key(fid,"QUBE","ISIS_GEOMETRY","",&icount,&ret);
if (!ret) levgroups = levgroups + 1;
(void) p_check_key(fid,"QUBE","ISIS_TARGET","",&icount,&ret);
if (!ret) levgroups = levgroups + 1;
/******************************************************************************
* All 3 levels Level 1 keyword groups are missing. This is either a
* pre-levels Level 1 file or a Level 2 file that has had the groups erased
* from the labels (or, under the old system, never got them). If the file
* contains either ISIS_MOSAIC or IMAGE_MAP_PROJECTION keyword groups, then
* it is not a Level 1 image and cannot be used. Otherwise, try using old
* SPICE routines.
******************************************************************************/
if (levgroups == 0) {
(void) p_check_key(fid,"QUBE","ISIS_MOSAIC","",&icount,&ret);
if (!ret) {
/* Level 2 mosaic without required groups */
goto mosaic_group_error;
} else {
(void) p_check_key(fid,"QUBE","IMAGE_MAP_PROJECTION","",&icount,&ret);
if (!ret) {
(void) p_check_key(fid,"QUBE","IMAGE_MAP_PROJECTION",
"MAP_PROJECTION_TYPE",&icount,&ret);
if (!ret) {
/* Level 2 image without required groups */
goto level2_group_error;
}
}
}
/* Pre-levels Level 1 image */
iflag = 0;
jflag = 1;
if (!distortd) jflag = 0;
spi_phosun(fid,obj_name,sizeof(obj_name),grp_name,sizeof(grp_name),
grp2_name,sizeof(grp2_name),jflag,0,&iflag,
&y,&x,&lat,&lon,&emi,&inc,&pha,&ssclat,&ssclon,
&scaz,&ssunlat,&ssunlon,&sunaz,&aznor,&res,&ret);
if (ret) goto spi_phosun_error;
/******************************************************************************
* If we got to here without an error, this is a valid pre-levels Level 1
* file.
******************************************************************************/
levels = FALSE;
level = 1;
/******************************************************************************
* All pre-levels instruments are framing cameras.
******************************************************************************/
frame = TRUE;
/******************************************************************************
* Now assign emi, inc, pha, scaz, sunaz to variables used below as
* appropriate for the framing camera case: Z axis is viewing direction, so
* emission angle is used to calculate datum derivatives rather than emission
* vector. Also calculate the scaling variable, cosemi, to be used for
* line-of-sight to vertical on output and vertical to line-of-sight on
* input.
******************************************************************************/
res = res * xsinci; /* xsinci=xlinci guaranteed */
sres = res;
C_AEPAR1->aspect = 1.0;
C_PSNPAR->phase[0] = pha;
clinc = pha;
azinc = sunaz;
clemi = 0.0;
azemi = 0.0;
dip = emi;
az = scaz + 180.0;
cosemi = cos(emi*L_DEG2RAD);
/******************************************************************************
* Obtain parameters needed for spherical datum
******************************************************************************/
if (C_DATUM2->datumtyp == 2) {
spi_lbplan(fid,"QUBE","","IMAGE_MAP_PROJECTION",planet,
sizeof(planet),radii,&lpos,&ret);
if (ret) goto spi_lbplan_error;
if (radii[1] == 0.0) radii[1] = radii[0];
if (radii[2] == 0.0) radii[2] = radii[0];
radius = sqrt((radii[0]*radii[0]+radii[1]*radii[1]+
radii[2]*radii[2])/3.0);
C_DATUM1->r0 = radius/res; /* Planet radius in pixels */
/******************************************************************************
* Obtain planet center in full frame and convert to subframe. xs0 and yl0 are
* with respect to the pixels of the subcube; xs0f and yl0f are computed by
* geomset at each grid resolution and refer to coordinates equal to indices
* in the DEM.
******************************************************************************/
spi_findlin(fid,(FLOAT4) ssclat,(FLOAT4) ssclon,
&C_DATUM1->xs0,&C_DATUM1->yl0,&ret);
if (ret) goto spi_findlin_error;
C_DATUM1->xs0=(C_DATUM1->xs0 - (FLOAT4) issi)/xsinci
+ 1.0;
C_DATUM1->yl0=(C_DATUM1->yl0 - (FLOAT4) isli)/xlinci
+ 1.0;
/******************************************************************************
* Must calculate z00s for sphere, putting middle of image at height 0
******************************************************************************/
C_DATUM1->z00s = -sqrt(C_DATUM1->r0*C_DATUM1->r0 -
pow((xcenter-C_DATUM1->xs0)*C_AEPAR1->aspect,2.0) -
pow((ycenter-C_DATUM1->yl0),2.0));
}
/******************************************************************************
* All 3 levels Level 1 keyword groups were found. This is a levels file,
* either Level 1 or Level 2 with the Level 1 groups included.
******************************************************************************/
} else if (levgroups == 3) {
levels = TRUE;
spi_level = lev_find_level(fid);
if (spi_level == 2) {
if (lev2_init_from_labels(fid,&both.map)) goto lev_init_error;
if (lev1_init(fid,&both.spi,0)) goto lev_init_error;
} else {
if (lev1_init(fid,&both.spi,0)) goto lev_init_error;
}
/* if (lev_init(fid,&both)) goto lev_init_error;*/
/******************************************************************************
* If input file is level 2 (map projected), then get the center latitude
* and center longitude.
******************************************************************************/
if (spi_level > 1 && strcmp(both.map.proj.name,"ORTHOGRAPHIC") == 0) {
(void) p_check_key(fid,"QUBE","IMAGE_MAP_PROJECTION","CENTER_LATITUDE",
&icount,&ret);
if (ret) goto clat_error;
icount = 1;
p_get_real_key(fid,"QUBE","IMAGE_MAP_PROJECTION","CENTER_LATITUDE",
2,&icount,&clat,&ret);
if (ret) goto clat_error;
(void) p_check_key(fid,"QUBE","IMAGE_MAP_PROJECTION","CENTER_LONGITUDE",
&icount,&ret);
if (ret) goto clon_error;
icount = 1;
p_get_real_key(fid,"QUBE","IMAGE_MAP_PROJECTION","CENTER_LONGITUDE",
2,&icount,&clon,&ret);
if (ret) goto clon_error;
}
/******************************************************************************
* This is a levels Level 1 image.
******************************************************************************/
if (spi_level == 1) {
level = 1;
data.samp = x;
data.line = y;
if (lev1_linesamp_to_latlon(&both.spi,&data)) goto ls_to_latlon;
/******************************************************************************
* Return emission, incidence, phase as emi, inc, pha respectively. These
* angles are evaluated at location x,y relative to the full image cube.
******************************************************************************/
lev1_calc_emission_angle(&data,&emi);
lev1_calc_incidence_angle(&data,&inc);
lev1_calc_phase_angle(&data,&pha);
/******************************************************************************
* Check spacecraft/instrument to determine if it's a scanner or a
* framing camera .
******************************************************************************/
found = -1;
for (icount=0; icount<NUMOFSCAN; icount++) {
if (strcmp(both.spi.inst.spacecraft,scan_sc[icount]) == 0
&& strcmp(both.spi.inst.name,scan_inst[icount]) == 0) {
frame = FALSE;
found = icount;
}
}
if (found == -1) {
for (icount=0; icount<NUMOFFRAME; icount++) {
if (strcmp(both.spi.inst.spacecraft,frame_sc[icount]) == 0
&& strcmp(both.spi.inst.name,frame_inst[icount]) == 0) {
frame = TRUE;
found = icount;
}
}
}
/* Invalid instrument */
if (found == -1) goto unknown_inst;
/******************************************************************************
* This is a scanner. Spherical datum model does not make sense.
******************************************************************************/
if (frame == FALSE) {
/******************************************************************************
* Return sample resolution, line resolution, spacecraft azimuth, sun azimuth
* as sampres, lineres, scaz, sunaz respectively. All of these values are
* evaluated at location x,y relative to the full image cube.
******************************************************************************/
if (lev1_calc_resolution(&both.spi,&data,&sampres,&lineres))
goto res_error;
if (sampres > lineres) azres = sampres;
else azres = lineres;
lev1_calc_spacecraft_azimuth(&both.spi,&data,azres,&scaz);
lev1_calc_sun_azimuth(&both.spi,&data,azres,&sunaz);
/******************************************************************************
* Now assign emi, inc, pha, scaz, sunaz to variables used below as
* appropriate for the scanner case: Z axis is local vertical, so
* emission angle is used to calculate emission vector rather than datum
* derivatives. Also calculate the scaling variable, cosemi, to be used
* for line-of-sight to vertical on output and vertical to line-of-sight on
* input (cosemi=1.0 for scanners).
******************************************************************************/
res = lineres*xlinci;
sres = sampres*xsinci;
C_AEPAR1->aspect = sampres/lineres;
C_PSNPAR->phase[0] = pha;
clinc = inc;
azinc = sunaz;
clemi = emi;
azemi = scaz;
dip = 0.0;
az = 0.0;
C_DATUM2->datumtyp = 1;
cosemi = 1.0;
/******************************************************************************
* This is a framing camera.
******************************************************************************/
} else {
lev1_calc_slant_distance(&data,&slantrange);
/******************************************************************************
* Return resolution, spacecraft azimuth, sun azimuth as res[index],
* scaz, sunaz respectively. All of these values are evaluated at
* location x,y relative to the full image cube.
******************************************************************************/
res = (slantrange/frame_flinpix[found])*xlinci;
sres = res;
azres = res;
lev1_calc_spacecraft_azimuth(&both.spi,&data,azres,&scaz);
lev1_calc_sun_azimuth(&both.spi,&data,azres,&sunaz);
/******************************************************************************
* Now assign emi, inc, pha, scaz, sunaz to variables used below as
* appropriate for the framing camera case: Z axis is viewing direction, so
* emission angle is used to calculate datum derivatives rather than
* emission vector. Also calculate the scaling variable, cosemi, to be used
* for line-of-sight to vertical on output and vertical to line-of-sight on
* input.
******************************************************************************/
C_AEPAR1->aspect = 1.0;
C_PSNPAR->phase[0] = pha;
clinc = pha;
azinc = sunaz;
clemi = 0.0;
azemi = 0.0;
dip = emi;
az = scaz + 180.0;
cosemi = cos(emi*L_DEG2RAD);
/******************************************************************************
* Obtain parameters needed for spherical datum
******************************************************************************/
if (C_DATUM2->datumtyp == 2) {
radii[0] = both.spi.target.radii[0];
radii[1] = both.spi.target.radii[1];
radii[2] = both.spi.target.radii[2];
if (radii[1] == 0.0) radii[1] = radii[0];
if (radii[2] == 0.0) radii[2] = radii[0];
radius = sqrt((radii[0]*radii[0]+radii[1]*radii[1]+
radii[2]*radii[2])/3.0);
C_DATUM1->r0 = radius/res; /* Planet radius in pixels */
lev1_calc_subspace(&both.spi,&data,&tmpdata);
ssclat = tmpdata.lat;
ssclon = tmpdata.lon;
data.lat = ssclat;
data.lon = ssclon;
if (lev1_latlon_to_linesamp(&both.spi,&data)) goto latlon_to_ls;
C_DATUM1->xs0 = data.samp;
C_DATUM1->yl0 = data.line;
/******************************************************************************
* We have planet center in terms of full image cube, so convert to
* subcube.
******************************************************************************/
C_DATUM1->xs0=(C_DATUM1->xs0 - (FLOAT4) issi)/xsinci
+ 1.0;
C_DATUM1->yl0=(C_DATUM1->yl0 - (FLOAT4) isli)/xlinci
+ 1.0;
/******************************************************************************
* Must calculate z00s for sphere, putting middle of image at height 0
******************************************************************************/
C_DATUM1->z00s = -sqrt(C_DATUM1->r0*C_DATUM1->r0 -
pow((xcenter-C_DATUM1->xs0)*C_AEPAR1->aspect,2.0) -
pow((ycenter-C_DATUM1->yl0),2.0));
}
}
/******************************************************************************
* This is a levels Level 2 image. Having two Level 2 files is permitted
* in software. The two image subcubes are the same size and they have
* the same projection parameters. It doesn't matter if the scalar datum
* variables are set twice from labels for both images; the results are
* guaranteed to be the same.
******************************************************************************/
} else {
level = 2;
/******************************************************************************
* Next, check the projection. Orthographic projection allows a set of
* images to be treated like one image. The coverage could be highly
* localized (setting projection center to subspacecraft point minimizes
* parallax) or hemispheric in scale. Spherical datum type is always used
* in this projection, with center at center of projection. Coordinate
* system has Z axis out of planet at center of projection. This point is
* known by lat and lon. First find its Level 1 coordinates so we can find
* ema, inc, phase here. NOTE that azimuths are returned but they are with
* respect to Level 1 space so they don't get used.
******************************************************************************/
if (strcmp(both.map.proj.name,"ORTHOGRAPHIC") == 0) {
data.lat = (FLOAT8) clat;
data.lon = (FLOAT8) clon;
if (lev1_latlon_to_linesamp(&both.spi,&data))
goto latlon_to_ls;
lev1_calc_emission_angle(&data,&emi);
lev1_calc_incidence_angle(&data,&inc);
lev1_calc_phase_angle(&data,&pha);
/******************************************************************************
* Now find the Level 2 coordinates of the center so we can find the
* azimuths. This routine gives line and sample of a given lat,lon in
* terms of the full image. Will later calculate position relative to
* subcube.
******************************************************************************/
if (lev2_latlon_to_linesamp(&both.map,&data))
goto latlon_to_ls;
C_DATUM1->xs0 = data.samp;
C_DATUM1->yl0 = data.line;
/******************************************************************************
* Find azimuth to sun and spacecraft in Level 2.
******************************************************************************/
/* Convert mapscale to units of resolution */
res = both.map.proj.kmperpix * xlinci;
sres = res;
azres = res;
tmpdata = data;
lev2_calc_spacecraft_azimuth(&both.spi,&data,
&both.map,&tmpdata,azres,&scaz);
tmpdata = data;
lev2_calc_sun_azimuth(&both.spi,&data,
&both.map,&tmpdata,azres,&sunaz);
/******************************************************************************
* Now assign emi, inc, pha, scaz, sunaz to variables used below as
* appropriate for the map projected case: Z axis is the local vertical,
* so emission angle is used to calculate emission vector rather than datum
* derivatives. Also calculate the scaling variable, cosemi, to be used
* for line-of-sight to vertical on output and vertical to line-of-sight on
* input (cosemi=1.0 for map-projected images).
******************************************************************************/
C_AEPAR1->aspect = 1.0;
C_PSNPAR->phase[0] = pha;
clinc = inc;
azinc = sunaz;
clemi = emi;
azemi = scaz;
C_DATUM2->datumtyp = 2;
cosemi = 1.0;
/******************************************************************************
* Obtain parameters needed for spherical datum
******************************************************************************/
radii[0] = both.spi.target.radii[0];
radii[1] = both.spi.target.radii[1];
radii[2] = both.spi.target.radii[2];
if (radii[1] == 0.0) radii[1] = radii[0];
if (radii[2] == 0.0) radii[2] = radii[0];
radius = sqrt((radii[0]*radii[0]+radii[1]*radii[1]+
radii[2]*radii[2])/3.0);
C_DATUM1->r0 = radius/res; /* Planet radius in pixels */
/******************************************************************************
* Call above gave planet center in full image cube, so convert to subcube
******************************************************************************/
C_DATUM1->xs0=(C_DATUM1->xs0 - (FLOAT4) issi)/xsinci
+ 1.0;
C_DATUM1->yl0=(C_DATUM1->yl0 - (FLOAT4) isli)/xlinci
+ 1.0;
/******************************************************************************
* Must calculate z00s for sphere, putting middle of image at height 0
******************************************************************************/
C_DATUM1->z00s = -sqrt(C_DATUM1->r0*C_DATUM1->r0 -
pow((xcenter-C_DATUM1->xs0)*C_AEPAR1->aspect,2.0) -
pow((ycenter-C_DATUM1->yl0),2.0));
/******************************************************************************
* Finally, calculate dip and azimuth of dip for sphere at reference
* point. Do this by calling datum to get the elevation differences across
* the pixel near the reference point (converted from full image cube to
* subcube coordinates.
******************************************************************************/
(void) geomset(1.0); /* Setup needed before datum */
i = (INT4) ((x - (FLOAT4) issi)/
xsinci + .5) + 1;
j = (INT4) ((y - (FLOAT4) isli)/
xlinci + .5) + 1;
(void) datum(i,j,4,&z01,&z02,&z03,&z04);
dzxm = 0.5*(-z01+z02+z03-z04);
dzym = 0.5*(-z01-z02+z03+z04);
dip = atan(sqrt((dzxm/C_AEPAR1->aspect)*(dzxm/C_AEPAR1->aspect)+
dzym*dzym))*L_RAD2DEG;
az = atan2(dzym*C_AEPAR1->aspect*C_AEPAR1->aspect,dzxm)*L_RAD2DEG;
/******************************************************************************
* Non-orthographic projections can be used to rectify scanner images.
* Intent is to represent a small region only, so datum type is planar and
* in fact has zero dip, similar to handling of Level 1 scanner images. No
* error checking is done to see if the projection has severe skew or other
* distortions that would make the calculation nonsensical.
*
* User input or default reference point location is in Level 2 space, so
* convert to Level 1 space using lat,lon coordinates.
******************************************************************************/
} else {
data.samp = x;
data.line = y;
if (lev2_linesamp_to_latlon(&both.map,&data)) goto ls_to_latlon;
if (lev2_latlon_to_linesamp(&both.map,&data)) goto latlon_to_ls;
tmpdata = data;
if (lev1_latlon_to_linesamp(&both.spi,&data))
goto latlon_to_ls;
else if (lev1_linesamp_to_latlon(&both.spi,&data))
goto ls_to_latlon;
/******************************************************************************
* Return emission, incidence, phase as emi, inc, pha respectively. These
* angles are evaluated at a location relative to the whole image.
******************************************************************************/
lev1_calc_emission_angle(&data,&emi);
lev1_calc_incidence_angle(&data,&inc);
lev1_calc_phase_angle(&data,&pha);
/******************************************************************************
* Get ground resolutions of map at the reference point.
******************************************************************************/
if (lev2_calc_map_resolution(&both.spi,&data,
&both.map,&tmpdata,&sampres,&lineres))
goto res_error;
/******************************************************************************
* Now, find azimuth to sun and spacecraft in Level 2.
******************************************************************************/
res = lineres*xlinci;
sres = sampres*xsinci;
azres = res;
lev2_calc_spacecraft_azimuth(&both.spi,&data,
&both.map,&tmpdata,azres,&scaz);
lev2_calc_sun_azimuth(&both.spi,&data,
&both.map,&tmpdata,azres,&sunaz);
/******************************************************************************
* Now assign emi, inc, pha, scaz, sunaz to variables used below as
* appropriate for the map projected case: Z axis is the local vertical,
* so emission angle is used to calculate emission vector rather than datum
* derivatives. Also calculate the scaling variable, cosemi, to be used
* for line-of-sight to vertical on output and vertical to line-of-sight on
* input (cosemi=1.0 for map-projected images).
******************************************************************************/
C_AEPAR1->aspect = sampres/lineres;
C_PSNPAR->phase[0] = pha;
clinc = inc;
azinc = sunaz;
clemi = emi;
azemi = scaz;
dip = 0.0;
az = 0.0;
C_DATUM2->datumtyp = 1;
cosemi = 1.0;
}
}
/******************************************************************************
* Only some of the needed levels Level 1 keyword groups found. Image is
* invalid.
******************************************************************************/
} else {
goto labels_not_complete;
}
/******************************************************************************
* Now proceed to calculate stored values with label information. Still
* need to calculate derivatives of the plane datum.
******************************************************************************/
dzdip = tan(dip*L_DEG2RAD)/sqrt(pow(cos(az*L_DEG2RAD)*C_AEPAR1->aspect,2.0)
+pow(sin(az*L_DEG2RAD),2.0));
C_DATUM1->dzx0 = -cos(az*L_DEG2RAD)*dzdip*C_AEPAR1->aspect*C_AEPAR1->aspect;
C_DATUM1->dzy0 = -sin(az*L_DEG2RAD)*dzdip;
C_DATUM1->z00 = -(C_DATUM1->dzx0*xcenter+C_DATUM1->dzy0*ycenter);
C_DATUM1->dz10 = -(C_DATUM1->dzx0+C_DATUM1->dzy0);
C_DATUM1->dz20 = -(C_DATUM1->dzx0-C_DATUM1->dzy0);
(void) geomset(1.0);
scale = 1000.0*res;
C_PGEOM->ci[0] = cos(clinc*L_DEG2RAD)*SQ2;
si0 = sin(clinc*L_DEG2RAD)/
sqrt(pow(cos(azinc*L_DEG2RAD)*C_AEPAR1->aspect,2.0)
+pow(sin(azinc*L_DEG2RAD),2.0));
C_PGEOM->si1[0] = si0*cos((45.0-azinc)*L_DEG2RAD);
C_PGEOM->si2[0] = si0*sin((45.0-azinc)*L_DEG2RAD);
C_PGEOM->ce[0] = cos(clemi*L_DEG2RAD)*SQ2;
se0 = sin(clemi*L_DEG2RAD)/
sqrt(pow(cos(azemi*L_DEG2RAD)*C_AEPAR1->aspect,2.0)
+pow(sin(azemi*L_DEG2RAD),2.0));
C_PGEOM->se1[0] = se0*cos((45.0-azemi)*L_DEG2RAD);
C_PGEOM->se2[0] = se0*sin((45.0-azemi)*L_DEG2RAD);
/******************************************************************************
* Calculations above are purely GEOMETRIC; those below are PHOTOMETRIC,
* i.e., depending on surface properties and description thereof.
******************************************************************************/
if (C_PPARS3->hapke) {
if (strncmp(C_PPARS4->phofunc,"HAPH_S",6) == 0) {
C_PPARS2->falpha[0] = (1.0-C_PPARS5->phg2)*
(1.0-C_PPARS5->phg1*C_PPARS5->phg1)/
(pow(1.0+C_PPARS5->phg1*C_PPARS5->phg1+2.0*
C_PPARS5->phg1*cos(C_PSNPAR->phase[0]*L_DEG2RAD),1.5))+
C_PPARS5->phg2*(1.0-C_PPARS5->phg1*C_PPARS5->phg1)/
(pow(1.0+C_PPARS5->phg1*C_PPARS5->phg1-2.0*C_PPARS5->phg1*
cos(C_PSNPAR->phase[0]*L_DEG2RAD),1.5))-1.0;
} else if (strncmp(C_PPARS4->phofunc,"HAPL_S",6) == 0) {
C_PPARS2->falpha[0] = 1.0+C_PPARS5->pbh*cos(C_PSNPAR->phase[0]*
L_DEG2RAD)+C_PPARS5->pch*(1.5*cos(C_PSNPAR->phase[0]*L_DEG2RAD)+
0.5);
}
C_PPARS2->twogam = 2.0*sqrt(1.0-C_PPARS5->pwh);
if (strncmp(C_PPARS4->phofunc,"HAPLEG",6) == 0 ||
strncmp(C_PPARS4->phofunc,"HAPHEN",6) == 0) {
mulpht = 62;
if (strncmp(C_PPARS4->phofunc,"HAPHEN",6) == 0)
mulpht = mulpht + 23;
if (C_PPARS5->phh != 0.0) mulpht = mulpht + 3;
if (C_PPARS5->ptheta != 0.0) mulpht = mulpht + 127;
C_PPARS1->mulps = (16+mulpht)*2;
C_PPARS1->mulpsp = (42+mulpht*4)*2;
} else {
C_PPARS1->mulps = 15;
C_PPARS1->mulpsp = 15;
}
} else {
C_PPARS2->pex1 = C_PPARS2->pex-1.0;
C_PPARS2->pl2 = C_PPARS2->pl2+C_PPARS2->pl2;
C_PPARS2->pl1 = 1.0-.5*C_PPARS2->pl2;
if (C_PPARS2->pl2 == 0.0) {
if (C_PPARS2->pex == 1.0) {
C_PPARS1->mulps = 0;
C_PPARS1->mulpsp = 0;
} else {
C_PPARS1->mulps = 15;
C_PPARS1->mulpsp = 4;
}
} else if (C_PPARS2->pl2 == 2.0) {
C_PPARS1->mulps = 3;
C_PPARS1->mulpsp = 4;
} else {
if (C_PPARS2->pex == 1.0) {
C_PPARS1->mulps = 5;
C_PPARS1->mulpsp = 7;
} else {
C_PPARS1->mulps = 21;
C_PPARS1->mulpsp = 14;
}
}
}
/******************************************************************************
* End of material-dependent code. Find photometric function
* normalization, etc. (AEPARs)
******************************************************************************/
bclipin = 1.0e30;
C_AEPAR1->bmax = 1.0e30;
i = (INT4) (xcenter+.5);
j = (INT4) (ycenter+.5);
(void) pbder(i,j,0.0,0.0,&C_AEPAR1->bnorm,&db1,&db2,1);
(void) findbmax();
if (C_AEPAR1->bmax < C_AEPAR1->bnorm*bclipin) C_AEPAR1->bclip = C_AEPAR1->bmax;
else C_AEPAR1->bclip = C_AEPAR1->bnorm*bclipin;
C_AEPAR2->flop = FALSE;
C_AEPAR2->logimg = FALSE;
/******************************************************************************
* Find azimuth of characteristic strips. This is calculated in terms of
* true Cartesian azimuth, whereas the other azimuths are those on the
* pixel grid, which may not have a unit aspect ratio. We will output the
* azimuth of characteristics transformed to a grid azimuth. Starting point
* for the search is the (numerator) sun azimuth, transformed to Cartesian.
******************************************************************************/
azi = atan2(sin(azinc*L_DEG2RAD)/C_AEPAR1->aspect,cos(azinc*L_DEG2RAD))*
L_RAD2DEG;
if (azi >= 0) icount = (INT4) (azi/90.0+.5);
else icount = (INT4) (azi/90.0-.5);
icard = icount-4*(icount/4);
cardaz = 90.0*((FLOAT4) icard);
delaza = cardaz-azi-45.0;
delazb = cardaz-azi+45.0;
p = ddberr;
C_AEPAR1->delaz = zbrent(p,delaza,delazb,1.0e-6);
if (ins > inl) arg = ins;
else arg = inl;
if (fabs(sin(C_AEPAR1->delaz*L_DEG2RAD)*cos(C_AEPAR1->delaz*L_DEG2RAD))*
arg <= 0.5) C_AEPAR1->delaz = 0.0;
while (icard < 0) {
icard = icard+4;
cardaz = cardaz+360.;
}
C_AEPAR1->charaz = cardaz-C_AEPAR1->delaz;
if (C_AEPAR1->dbrat*(0.5-(icard%2)) < 0.0) C_AEPAR1->charaz =
C_AEPAR1->charaz+90.;
C_AEPAR1->charaz = C_AEPAR1->charaz-360.0*((INT4) (C_AEPAR1->charaz/360.0));
if (C_AEPAR1->charaz > 180.) C_AEPAR1->charaz = C_AEPAR1->charaz-360.;
if (C_AEPAR1->charaz >= 0.) arg = 180.;
else arg = -180.;
if (fabs(C_AEPAR1->charaz) > 90.) C_AEPAR1->charaz = C_AEPAR1->charaz-arg;
/******************************************************************************
* We use Cartesian charaz but print grid-relative charazgrid for the
* user. No longer need to use ioct in main program to control geometric
* transformation of images on input. Instead, set ioct1=1 and use it in
* calls to pblinein1, etc. By setting the octant of the characteristics
* ioct here and using it to control the SOR sweep direction, we get
* optimal results for any charaz. ioct is passed via common.
******************************************************************************/
charazgrid = atan2(sin(C_AEPAR1->charaz*L_DEG2RAD)*C_AEPAR1->aspect,
cos(C_AEPAR1->charaz*L_DEG2RAD))*L_RAD2DEG;
if ((-90.0 <= C_AEPAR1->charaz) && (C_AEPAR1->charaz < -45.0))
C_AEPAR3->ioct = -2;
else if ((-45.0 <= C_AEPAR1->charaz) && (C_AEPAR1->charaz < 0.0))
C_AEPAR3->ioct = -1;
else if ((45.0 < C_AEPAR1->charaz) && (C_AEPAR1->charaz <= 90.0))
C_AEPAR3->ioct = 2;
else
C_AEPAR3->ioct = 1;
sprintf(C_MSG->pcpmsg,"X= %f",x);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Y= %f",y);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"RADIUS= %f",radius);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Dip of datum= %f",dip);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Azimuth of dip= %f",az);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Azimuth of characteristics= %f",charazgrid);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Resolution (km/pix) = %f",sres);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Aspect = %f",1.0/C_AEPAR1->aspect);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Emission angle = %f",emi);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Incidence angle = %f",inc);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Phase angle = %f",pha);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Spacecraft azimuth = %f",scaz);
u_write_msg(3,C_MSG->pcpmsg);
sprintf(C_MSG->pcpmsg,"Sun azimuth = %f",sunaz);
u_write_msg(3,C_MSG->pcpmsg);
/******************************************************************************
* Finish getting TAE parameters
******************************************************************************/
(void) pcsi_ipars(&nsmooth);
(void) write2log(1,ins,inl,note,lnote,from,clinc,
azinc,clemi,azemi,sres,
dip,az,charazgrid,radius,dndatum,
1.0/C_AEPAR1->aspect);
if (PcsiFirstGuess()) goto first_guess_error;
(void) write2log(2,ins,inl,note,lnote,from,clinc,
azinc,clemi,azemi,sres,
dip,az,charazgrid,radius,dndatum,
1.0/C_AEPAR1->aspect);
return(0);
/*****************************************************
Error section
*****************************************************/
user_parameter_error:
sprintf(C_MSG->pcpmsg,"Error retrieving TAE parameter %s",prmname);
u_error("INITPCSI-TAEERR",C_MSG->pcpmsg,-1,1);
return(-1);
spi_phosun_error:
sprintf(C_MSG->pcpmsg,
"Unable to get spacecraft and sun position information for %s",from);
u_error("INITPCSI-SPIPHOSUN",C_MSG->pcpmsg,-2,1);
return(-2);
spi_findlin_error:
sprintf(C_MSG->pcpmsg,"Unable to convert lat,lon to line,samp for %s",
from);
u_error("INITPCSI-SPIFINDLIN",C_MSG->pcpmsg,-3,1);
return(-3);
spi_lbplan_error:
sprintf(C_MSG->pcpmsg,"Unable to read planet radii and lpos from %s",
from);
u_error("INITPCSI-SPILBP",C_MSG->pcpmsg,-4,1);
return(-4);
first_guess_error:
sprintf(C_MSG->pcpmsg,"Unable to generate an initial solution for topography");
u_error("INITPCSI-SOLNERR",C_MSG->pcpmsg,-5,1);
return(-5);
lev_init_error:
sprintf(C_MSG->pcpmsg,"Unable to initialize input file %s",from);
u_error("INITPCSI-LEVINIT",C_MSG->pcpmsg,-6,1);
return(-6);
ls_to_latlon:
sprintf(C_MSG->pcpmsg,"Unable to convert line,sample to lat,lon for %s",
from);
u_error("INITPCSI-LSTOLATLON",C_MSG->pcpmsg,-7,1);
return(-7);
latlon_to_ls:
sprintf(C_MSG->pcpmsg,"Unable to convert lat,lon to line,sample for %s",
from);
u_error("INITPCSI-LATLONTOLS",C_MSG->pcpmsg,-8,1);
return(-8);
res_error:
sprintf(C_MSG->pcpmsg,
"Unable to determine line,sample resolution for %s",from);
u_error("INITPCSI-LSRES",C_MSG->pcpmsg,-9,1);
return(-9);
bad_subsamp:
sprintf(C_MSG->pcpmsg,"Error getting sub-sample information for %s",
from);
u_error("INITPCSI-SUBSAMP",C_MSG->pcpmsg,-10,1);
return(-10);
bad_subline:
sprintf(C_MSG->pcpmsg,"Error getting sub-line information for %s",
from);
u_error("INITPCSI-SUBLINE",C_MSG->pcpmsg,-11,1);
return(-11);
inc_error:
sprintf(C_MSG->pcpmsg,"Line and sample increment of file %s are not equal",
from);
u_error("INITPCSI-LINCSINC",C_MSG->pcpmsg,-12,1);
return(-12);
mosaic_group_error:
sprintf(C_MSG->pcpmsg,
"Mosaicked images must have all of groups: ISIS_INSTRUMENT, ISIS_GEOMETRY, ISIS_TARGET");
u_error("INITPCSI-MOSGRP",C_MSG->pcpmsg,-13,1);
return(-13);
level2_group_error:
sprintf(C_MSG->pcpmsg,
"Level 2 images must have all of groups: ISIS_INSTRUMENT, ISIS_GEOMETRY, ISIS_TARGET");
u_error("INITPCSI-LEV2GRP",C_MSG->pcpmsg,-14,1);
return(-14);
unknown_inst:
sprintf(C_MSG->pcpmsg,
"Unknown spacecraft/instrument found in %s",from);
u_error("INITPCSI-BILEV1",C_MSG->pcpmsg,-15,1);
return(-15);
labels_not_complete:
sprintf(C_MSG->pcpmsg,
"Necessary Level 1 keyword groups not found in %s",from);
u_error("INITPCSI-INCLAB",C_MSG->pcpmsg,-16,1);
return(-16);
haphen_error:
sprintf(C_MSG->pcpmsg,
"The following values must be provided for function HAPHEN: wh,theta,b0,hh,hg1,hg2");
u_error("INITPCSI-HAPHEN",C_MSG->pcpmsg,-17,1);
return(-17);
hapleg_error:
sprintf(C_MSG->pcpmsg,
"The following values must be provided for function HAPLEG: wh,theta,b0,hh,bh,ch");
u_error("INITPCSI-HAPLEG",C_MSG->pcpmsg,-18,1);
return(-18);
haph_s_error:
sprintf(C_MSG->pcpmsg,
"The following values must be provided for function HAPH_S: wh,hg1,hg2");
u_error("INITPCSI-HAPH_S",C_MSG->pcpmsg,-19,1);
return(-19);
hapl_s_error:
sprintf(C_MSG->pcpmsg,
"The following values must be provided for function HAPL_S: wh,bh,ch");
u_error("INITPCSI-HAPL_S",C_MSG->pcpmsg,-20,1);
return(-20);
min_error:
sprintf(C_MSG->pcpmsg,
"The following values must be provided for function MIN: k");
u_error("INITPCSI-MIN",C_MSG->pcpmsg,-21,1);
return(-21);
lunlam_error:
sprintf(C_MSG->pcpmsg,
"The following values must be provided for function LUNLAM: l");
u_error("INITPCSI-LUNLAM",C_MSG->pcpmsg,-22,1);
return(-22);
zout_remove_error:
sprintf(C_MSG->pcpmsg,
"Unable to delete pre-existing ZOUT file");
u_error("INITPCSI-ZOUTREM",C_MSG->pcpmsg,-23,1);
return(-23);
flspec_error:
sprintf(C_MSG->pcpmsg,
"The ZOUT filename is invalid");
u_error("INITPCSI-FLSPEC",C_MSG->pcpmsg,-24,1);
return(-24);
to_file_error:
sprintf(C_MSG->pcpmsg,
"TO file was not specified by user");
u_error("INITPCSI-TOERR",C_MSG->pcpmsg,-25,1);
return(-25);
to_file_exist:
sprintf(C_MSG->pcpmsg,
"TO file already exists");
u_error("INITPCSI-TOEXIST",C_MSG->pcpmsg,-26,1);
return(-26);
to_file_invalid:
sprintf(C_MSG->pcpmsg,
"TO file name invalid");
u_error("INITPCSI-TOINV",C_MSG->pcpmsg,-27,1);
return(-27);
cube_open_error:
sprintf(C_MSG->pcpmsg,"Error opening input cube file %s",from);
u_error("INITPCSI-OPENERR",C_MSG->pcpmsg,-28,1);
return(-28);
invalid_cube:
sprintf(C_MSG->pcpmsg,"%s is not a standard cube file",from);
u_error("INITPCSI-INVCUBE",C_MSG->pcpmsg,-29,1);
return(-29);
bad_sys_keys:
sprintf(C_MSG->pcpmsg,"Error obtaining system keywords from %s",from);
u_error("INITPCSI-SYSKEYS",C_MSG->pcpmsg,-30,1);
return(-30);
parse_sfrom_error:
sprintf(C_MSG->pcpmsg,"Unable to parse SFROM parameter %s for %s",sfrom,from);
u_error("INITPCSI-PRSSFROM",C_MSG->pcpmsg,-31,1);
return(-31);
sfrom_error:
sprintf(C_MSG->pcpmsg,"Unable to apply SFROM %s to input file %s",sfrom,from);
u_error("INITPCSI-SFROMERR",C_MSG->pcpmsg,-32,1);
return(-32);
clat_error:
sprintf(C_MSG->pcpmsg,"Unable to get clat from labels of %s",from);
u_error("INITPCSI-CLAT",C_MSG->pcpmsg,-33,1);
return(-33);
clon_error:
sprintf(C_MSG->pcpmsg,"Unable to get clon from labels of %s",from);
u_error("INITPCSI-CLON",C_MSG->pcpmsg,-34,1);
return(-34);
}
