int qemuUpdateActivePciHostdevs(struct qemud_driver *driver,
virDomainDefPtr def)
{
pciDeviceList *pcidevs;
int ret = -1;
if (!def->nhostdevs)
return 0;
if (!(pcidevs = qemuGetPciHostDeviceList(def->hostdevs, def->nhostdevs)))
return -1;
while (pciDeviceListCount(pcidevs) > 0) {
pciDevice *dev = pciDeviceListGet(pcidevs, 0);
pciDeviceListSteal(pcidevs, dev);
if (pciDeviceListAdd(driver->activePciHostdevs, dev) < 0) {
pciFreeDevice(dev);
goto cleanup;
}
}
ret = 0;
cleanup:
pciDeviceListFree(pcidevs);
return ret;
}
int qemuPrepareHostdevPCIDevices(struct qemud_driver *driver,
const char *name,
const unsigned char *uuid,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs)
{
pciDeviceList *pcidevs;
int last_processed_hostdev_vf = -1;
int i;
int ret = -1;
if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
return -1;
/* We have to use 9 loops here. *All* devices must
* be detached before we reset any of them, because
* in some cases you have to reset the whole PCI,
* which impacts all devices on it. Also, all devices
* must be reset before being marked as active.
*/
/* Loop 1: validate that non-managed device isn't in use, eg
* by checking that device is either un-bound, or bound
* to pci-stub.ko
*/
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
pciDevice *other;
if (!pciDeviceIsAssignable(dev, !driver->relaxedACS)) {
virReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is not assignable"),
pciDeviceGetName(dev));
goto cleanup;
}
/* The device is in use by other active domain if
* the dev is in list driver->activePciHostdevs.
*/
if ((other = pciDeviceListFind(driver->activePciHostdevs, dev))) {
const char *other_name = pciDeviceGetUsedBy(other);
if (other_name)
virReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is in use by domain %s"),
pciDeviceGetName(dev), other_name);
else
virReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is already in use"),
pciDeviceGetName(dev));
goto cleanup;
}
}
/* Loop 2: detach managed devices */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
if (pciDeviceGetManaged(dev) &&
pciDettachDevice(dev, driver->activePciHostdevs, NULL) < 0)
goto reattachdevs;
}
/* Loop 3: Now that all the PCI hostdevs have been detached, we
* can safely reset them */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
if (pciResetDevice(dev, driver->activePciHostdevs,
driver->inactivePciHostdevs) < 0)
goto reattachdevs;
}
/* Loop 4: For SRIOV network devices, Now that we have detached the
* the network device, set the netdev config */
for (i = 0; i < nhostdevs; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET &&
hostdev->parent.data.net) {
if (qemuDomainHostdevNetConfigReplace(hostdev, uuid,
driver->stateDir) < 0) {
goto resetvfnetconfig;
}
}
last_processed_hostdev_vf = i;
}
/* Loop 5: Now mark all the devices as active */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
if (pciDeviceListAdd(driver->activePciHostdevs, dev) < 0)
goto inactivedevs;
}
/* Loop 6: Now remove the devices from inactive list. */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
pciDeviceListDel(driver->inactivePciHostdevs, dev);
}
/* Loop 7: Now set the used_by_domain of the device in
* driver->activePciHostdevs as domain name.
*/
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev, *activeDev;
dev = pciDeviceListGet(pcidevs, i);
activeDev = pciDeviceListFind(driver->activePciHostdevs, dev);
pciDeviceSetUsedBy(activeDev, name);
}
/* Loop 8: Now set the original states for hostdev def */
for (i = 0; i < nhostdevs; i++) {
pciDevice *dev;
pciDevice *pcidev;
virDomainHostdevDefPtr hostdev = hostdevs[i];
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
if (hostdev->source.subsys.type != VIR_DOMAIN_HOSTDEV_SUBSYS_TYPE_PCI)
continue;
dev = pciGetDevice(hostdev->source.subsys.u.pci.domain,
hostdev->source.subsys.u.pci.bus,
hostdev->source.subsys.u.pci.slot,
hostdev->source.subsys.u.pci.function);
/* original states "unbind_from_stub", "remove_slot",
* "reprobe" were already set by pciDettachDevice in
* loop 2.
*/
if ((pcidev = pciDeviceListFind(pcidevs, dev))) {
hostdev->origstates.states.pci.unbind_from_stub =
pciDeviceGetUnbindFromStub(pcidev);
hostdev->origstates.states.pci.remove_slot =
pciDeviceGetRemoveSlot(pcidev);
hostdev->origstates.states.pci.reprobe =
pciDeviceGetReprobe(pcidev);
}
pciFreeDevice(dev);
}
/* Loop 9: Now steal all the devices from pcidevs */
while (pciDeviceListCount(pcidevs) > 0)
pciDeviceListStealIndex(pcidevs, 0);
ret = 0;
goto cleanup;
inactivedevs:
/* Only steal all the devices from driver->activePciHostdevs. We will
* free them in pciDeviceListFree().
*/
while (pciDeviceListCount(pcidevs) > 0) {
pciDevice *dev = pciDeviceListGet(pcidevs, 0);
pciDeviceListSteal(driver->activePciHostdevs, dev);
}
resetvfnetconfig:
for (i = 0; i < last_processed_hostdev_vf; i++) {
virDomainHostdevDefPtr hostdev = hostdevs[i];
if (hostdev->parent.type == VIR_DOMAIN_DEVICE_NET &&
hostdev->parent.data.net) {
qemuDomainHostdevNetConfigRestore(hostdev, driver->stateDir);
}
}
reattachdevs:
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
pciReAttachDevice(dev, driver->activePciHostdevs, NULL);
}
cleanup:
pciDeviceListFree(pcidevs);
return ret;
}
int qemuPrepareHostdevPCIDevices(struct qemud_driver *driver,
const char *name,
virDomainHostdevDefPtr *hostdevs,
int nhostdevs)
{
pciDeviceList *pcidevs;
int i;
int ret = -1;
if (!(pcidevs = qemuGetPciHostDeviceList(hostdevs, nhostdevs)))
return -1;
/* We have to use 6 loops here. *All* devices must
* be detached before we reset any of them, because
* in some cases you have to reset the whole PCI,
* which impacts all devices on it. Also, all devices
* must be reset before being marked as active.
*/
/* Loop 1: validate that non-managed device isn't in use, eg
* by checking that device is either un-bound, or bound
* to pci-stub.ko
*/
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
pciDevice *other;
if (!pciDeviceIsAssignable(dev, !driver->relaxedACS)) {
qemuReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is not assignable"),
pciDeviceGetName(dev));
goto cleanup;
}
/* The device is in use by other active domain if
* the dev is in list driver->activePciHostdevs.
*/
if ((other = pciDeviceListFind(driver->activePciHostdevs, dev))) {
const char *other_name = pciDeviceGetUsedBy(other);
if (other_name)
qemuReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is in use by domain %s"),
pciDeviceGetName(dev), other_name);
else
qemuReportError(VIR_ERR_OPERATION_INVALID,
_("PCI device %s is already in use"),
pciDeviceGetName(dev));
goto cleanup;
}
}
/* Loop 2: detach managed devices */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
if (pciDeviceGetManaged(dev) &&
pciDettachDevice(dev, driver->activePciHostdevs) < 0)
goto reattachdevs;
}
/* Loop 3: Now that all the PCI hostdevs have been detached, we
* can safely reset them */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
if (pciResetDevice(dev, driver->activePciHostdevs, pcidevs) < 0)
goto reattachdevs;
}
/* Loop 4: Now mark all the devices as active */
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
if (pciDeviceListAdd(driver->activePciHostdevs, dev) < 0) {
pciFreeDevice(dev);
goto inactivedevs;
}
}
/* Loop 5: Now set the used_by_domain of the device in
* driver->activePciHostdevs as domain name.
*/
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev, *activeDev;
dev = pciDeviceListGet(pcidevs, i);
activeDev = pciDeviceListFind(driver->activePciHostdevs, dev);
pciDeviceSetUsedBy(activeDev, name);
}
/* Loop 6: Now steal all the devices from pcidevs */
while (pciDeviceListCount(pcidevs) > 0) {
pciDevice *dev = pciDeviceListGet(pcidevs, 0);
pciDeviceListSteal(pcidevs, dev);
}
ret = 0;
goto cleanup;
inactivedevs:
/* Only steal all the devices from driver->activePciHostdevs. We will
* free them in pciDeviceListFree().
*/
while (pciDeviceListCount(pcidevs) > 0) {
pciDevice *dev = pciDeviceListGet(pcidevs, 0);
pciDeviceListSteal(driver->activePciHostdevs, dev);
}
reattachdevs:
for (i = 0; i < pciDeviceListCount(pcidevs); i++) {
pciDevice *dev = pciDeviceListGet(pcidevs, i);
pciReAttachDevice(dev, driver->activePciHostdevs);
}
cleanup:
pciDeviceListFree(pcidevs);
return ret;
}
