static int captured_command_loop (void *data) { struct ui *ui = current_ui; /* Top-level execution commands can be run in the background from here on. */ current_ui->async = 1; /* Give the interpreter a chance to print a prompt, if necessary */ if (ui->prompt_state != PROMPT_BLOCKED) interp_pre_command_loop (top_level_interpreter ()); /* Now it's time to start the event loop. */ start_event_loop (); /* FIXME: cagney/1999-11-05: A correct command_loop() implementaton would clean things up (restoring the cleanup chain) to the state they were just prior to the call. Technically, this means that the do_cleanups() below is redundant. Unfortunately, many FUNCs are not that well behaved. do_cleanups should either be replaced with a do_cleanups call (to cover the problem) or an assertion check to detect bad FUNCs code. */ do_cleanups (all_cleanups ()); /* If the command_loop returned, normally (rather than threw an error) we try to quit. If the quit is aborted, catch_errors() which called this catch the signal and restart the command loop. */ quit_command (NULL, ui->instream == ui->stdin_stream); return 1; }
void simple_shell() { int n_args, i; //memory space for user command is always the same, freed on quit char * * sarray = malloc(max_arg_c * sizeof(*sarray)); for (i = 0; i < max_arg_c; i += 1) sarray[i] = malloc(max_arg_length + 1); print_commands(); while (1) { printf("\n---> "); for (i = 0; i < max_arg_c; i += 1) *sarray[i] = (char *)NULL; n_args = get_command_line(sarray); if (quit_command(sarray[0])) { printf("exiting shell \n"); for (i = 0; i < max_arg_c; i += 1) free(sarray[i]); free(sarray); break; } else if (!strcmp(sarray[0], "help")) print_commands(); else if (!strcmp(sarray[0], "echo")) { for (i = 1; i < n_args && sarray[i] != NULL; i += 1) printf("%s ", sarray[i]); } else if (!strcmp(sarray[0], "run")) run_program(sarray, n_args); else printf("command not found. "); } }
static void quit_command1(char *arg, int from_tty) { if (macsbug_screen) { /* if macsbug screen is on... */ if (!gdb_target_running()) /* ...if not currently running... */ fprintf(stderr, "\n"); /* ...need extra \n for missing confirm */ fprintf(stderr, "\n" ERASE_BELOW "\n"); /* ...erase everything below */ } quit_command(arg, from_tty); /* let gdb do the quitting */ }
/* When there is an event ready on the stdin file desriptor, instead of calling readline directly throught the callback function, or instead of calling gdb_readline2, give gdb a chance to detect errors and do something. */ void stdin_event_handler (int error, gdb_client_data client_data) { if (error) { printf_unfiltered (_("error detected on stdin\n")); delete_file_handler (input_fd); discard_all_continuations (); /* If stdin died, we may as well kill gdb. */ quit_command ((char *) 0, stdin == instream); } else (*call_readline) (client_data); }
void stdin_event_handler (int error, gdb_client_data client_data) { struct ui *ui = (struct ui *) client_data; if (error) { /* Switch to the main UI, so diagnostics always go there. */ current_ui = main_ui; delete_file_handler (ui->input_fd); if (main_ui == ui) { /* If stdin died, we may as well kill gdb. */ printf_unfiltered (_("error detected on stdin\n")); quit_command ((char *) 0, 0); } else { /* Simply delete the UI. */ delete ui; } } else { /* Switch to the UI whose input descriptor woke up the event loop. */ current_ui = ui; /* This makes sure a ^C immediately followed by further input is always processed in that order. E.g,. with input like "^Cprint 1\n", the SIGINT handler runs, marks the async signal handler, and then select/poll may return with stdin ready, instead of -1/EINTR. The gdb.base/double-prompt-target-event-error.exp test exercises this. */ QUIT; do { call_stdin_event_handler_again_p = 0; ui->call_readline (client_data); } while (call_stdin_event_handler_again_p != 0); } }
void stdin_event_handler (int error, gdb_client_data client_data) { if (error) { printf_unfiltered (_("error detected on stdin\n")); delete_file_handler (input_fd); /* If stdin died, we may as well kill gdb. */ quit_command ((char *) 0, stdin == instream); } else { do { call_stdin_event_handler_again_p = 0; (*call_readline) (client_data); } while (call_stdin_event_handler_again_p != 0); } }
static int captured_command_loop (void *data) { current_interp_command_loop (); /* FIXME: cagney/1999-11-05: A correct command_loop() implementaton would clean things up (restoring the cleanup chain) to the state they were just prior to the call. Technically, this means that the do_cleanups() below is redundant. Unfortunately, many FUNCs are not that well behaved. do_cleanups should either be replaced with a do_cleanups call (to cover the problem) or an assertion check to detect bad FUNCs code. */ do_cleanups (ALL_CLEANUPS); /* If the command_loop returned, normally (rather than threw an error) we try to quit. If the quit is aborted, catch_errors() which called this catch the signal and restart the command loop. */ quit_command (NULL, instream == stdin); return 1; }
void check_clients() { int i, connfd; char buf[MAXLINE]; rio_t rio; for (i = 0; (i <= p.maxi) && (p.nready > 0); i++) { connfd = p.clientfd[i]; rio = p.clientrio[i]; if ((connfd > 0) && FD_ISSET(connfd, &p.ready_set)){ p.nready--; if (Rio_readlineb(&rio, buf, MAXLINE) > 0) { get_msg(buf,buf); request_check(i, buf); while( rio.rio_cnt > 0 ){ Rio_readlineb(&rio,buf,MAXLINE); get_msg(buf,buf); request_check(i,buf); } } else{/* EOF detected. User Exit */ //debug char buf[MAX_MSG_LEN]; show_user(buf,MAX_MSG_LEN,user_table[connfd]); printf("!!Exit%s\n", buf); /* do quit command for user at connfd[i] */ quit_command(i); } //debug debug_list_all_user(); debug_list_all_channel(); printf("===================================\n"); } } }
/* NOTE: 1999-04-30 This is the asynchronous version of the command_loop function. The command_loop function will be obsolete when we switch to use the event loop at every execution of gdb. */ static void command_handler (char *command) { struct cleanup *old_chain; int stdin_is_tty = ISATTY (stdin); struct continuation_arg *arg1; struct continuation_arg *arg2; long time_at_cmd_start; #ifdef HAVE_SBRK long space_at_cmd_start = 0; #endif extern int display_time; extern int display_space; quit_flag = 0; if (instream == stdin && stdin_is_tty) reinitialize_more_filter (); old_chain = make_cleanup (null_cleanup, 0); /* If readline returned a NULL command, it means that the connection with the terminal is gone. This happens at the end of a testsuite run, after Expect has hung up but GDB is still alive. In such a case, we just quit gdb killing the inferior program too. */ if (command == 0) quit_command ((char *) 0, stdin == instream); time_at_cmd_start = get_run_time (); if (display_space) { #ifdef HAVE_SBRK char *lim = (char *) sbrk (0); space_at_cmd_start = lim - lim_at_start; #endif } execute_command (command, instream == stdin); /* Set things up for this function to be compete later, once the execution has completed, if we are doing an execution command, otherwise, just go ahead and finish. */ if (target_can_async_p () && target_executing) { arg1 = (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg)); arg2 = (struct continuation_arg *) xmalloc (sizeof (struct continuation_arg)); arg1->next = arg2; arg2->next = NULL; arg1->data.longint = time_at_cmd_start; #ifdef HAVE_SBRK arg2->data.longint = space_at_cmd_start; #endif add_continuation (command_line_handler_continuation, arg1); } /* Do any commands attached to breakpoint we stopped at. Only if we are always running synchronously. Or if we have just executed a command that doesn't start the target. */ if (!target_can_async_p () || !target_executing) { bpstat_do_actions (&stop_bpstat); do_cleanups (old_chain); if (display_time) { long cmd_time = get_run_time () - time_at_cmd_start; printf_unfiltered (_("Command execution time: %ld.%06ld\n"), cmd_time / 1000000, cmd_time % 1000000); } if (display_space) { #ifdef HAVE_SBRK char *lim = (char *) sbrk (0); long space_now = lim - lim_at_start; long space_diff = space_now - space_at_cmd_start; printf_unfiltered (_("Space used: %ld (%c%ld for this command)\n"), space_now, (space_diff >= 0 ? '+' : '-'), space_diff); #endif } } }
static int captured_main (void *data) { struct captured_main_args *context = data; int argc = context->argc; char **argv = context->argv; int count; static int quiet = 0; static int batch = 0; static int set_args = 0; /* Pointers to various arguments from command line. */ char *symarg = NULL; char *execarg = NULL; char *corearg = NULL; char *cdarg = NULL; char *ttyarg = NULL; /* These are static so that we can take their address in an initializer. */ static int print_help; static int print_version; /* Pointers to all arguments of --command option. */ char **cmdarg; /* Allocated size of cmdarg. */ int cmdsize; /* Number of elements of cmdarg used. */ int ncmd; /* Indices of all arguments of --directory option. */ char **dirarg; /* Allocated size. */ int dirsize; /* Number of elements used. */ int ndir; struct stat homebuf, cwdbuf; char *homedir, *homeinit; int i; long time_at_startup = get_run_time (); #if defined (HAVE_SETLOCALE) && defined (HAVE_LC_MESSAGES) setlocale (LC_MESSAGES, ""); #endif #if defined (HAVE_SETLOCALE) setlocale (LC_CTYPE, ""); #endif bindtextdomain (PACKAGE, LOCALEDIR); textdomain (PACKAGE); /* This needs to happen before the first use of malloc. */ init_malloc (NULL); #ifdef HAVE_SBRK lim_at_start = (char *) sbrk (0); #endif #if defined (ALIGN_STACK_ON_STARTUP) i = (int) &count & 0x3; if (i != 0) alloca (4 - i); #endif cmdsize = 1; cmdarg = (char **) xmalloc (cmdsize * sizeof (*cmdarg)); ncmd = 0; dirsize = 1; dirarg = (char **) xmalloc (dirsize * sizeof (*dirarg)); ndir = 0; quit_flag = 0; line = (char *) xmalloc (linesize); line[0] = '\0'; /* Terminate saved (now empty) cmd line */ instream = stdin; getcwd (gdb_dirbuf, sizeof (gdb_dirbuf)); current_directory = gdb_dirbuf; gdb_stdout = stdio_fileopen (stdout); gdb_stderr = stdio_fileopen (stderr); gdb_stdlog = gdb_stderr; /* for moment */ gdb_stdtarg = gdb_stderr; /* for moment */ gdb_stdin = stdio_fileopen (stdin); gdb_stdtargerr = gdb_stderr; /* for moment */ gdb_stdtargin = gdb_stdin; /* for moment */ /* initialize error() */ error_init (); /* Set the sysroot path. */ #ifdef TARGET_SYSTEM_ROOT_RELOCATABLE gdb_sysroot = make_relative_prefix (argv[0], BINDIR, TARGET_SYSTEM_ROOT); if (gdb_sysroot) { struct stat s; int res = 0; if (stat (gdb_sysroot, &s) == 0) if (S_ISDIR (s.st_mode)) res = 1; if (res == 0) { xfree (gdb_sysroot); gdb_sysroot = TARGET_SYSTEM_ROOT; } } else gdb_sysroot = TARGET_SYSTEM_ROOT; #else #if defined (TARGET_SYSTEM_ROOT) gdb_sysroot = TARGET_SYSTEM_ROOT; #else gdb_sysroot = ""; #endif #endif /* There will always be an interpreter. Either the one passed into this captured main, or one specified by the user at start up, or the console. Initialize the interpreter to the one requested by the application. */ interpreter_p = xstrdup (context->interpreter_p); /* Parse arguments and options. */ { int c; /* When var field is 0, use flag field to record the equivalent short option (or arbitrary numbers starting at 10 for those with no equivalent). */ enum { OPT_SE = 10, OPT_CD, OPT_ANNOTATE, OPT_STATISTICS, OPT_TUI, OPT_NOWINDOWS, OPT_WINDOWS }; static struct option long_options[] = { #if defined(TUI) {"tui", no_argument, 0, OPT_TUI}, #endif {"xdb", no_argument, &xdb_commands, 1}, {"dbx", no_argument, &dbx_commands, 1}, {"readnow", no_argument, &readnow_symbol_files, 1}, {"r", no_argument, &readnow_symbol_files, 1}, {"quiet", no_argument, &quiet, 1}, {"q", no_argument, &quiet, 1}, {"silent", no_argument, &quiet, 1}, {"nx", no_argument, &inhibit_gdbinit, 1}, {"n", no_argument, &inhibit_gdbinit, 1}, {"batch", no_argument, &batch, 1}, {"epoch", no_argument, &epoch_interface, 1}, /* This is a synonym for "--annotate=1". --annotate is now preferred, but keep this here for a long time because people will be running emacses which use --fullname. */ {"fullname", no_argument, 0, 'f'}, {"f", no_argument, 0, 'f'}, {"annotate", required_argument, 0, OPT_ANNOTATE}, {"help", no_argument, &print_help, 1}, {"se", required_argument, 0, OPT_SE}, {"symbols", required_argument, 0, 's'}, {"s", required_argument, 0, 's'}, {"exec", required_argument, 0, 'e'}, {"e", required_argument, 0, 'e'}, {"core", required_argument, 0, 'c'}, {"c", required_argument, 0, 'c'}, {"pid", required_argument, 0, 'p'}, {"p", required_argument, 0, 'p'}, {"command", required_argument, 0, 'x'}, {"version", no_argument, &print_version, 1}, {"x", required_argument, 0, 'x'}, #ifdef GDBTK {"tclcommand", required_argument, 0, 'z'}, {"enable-external-editor", no_argument, 0, 'y'}, {"editor-command", required_argument, 0, 'w'}, #endif {"ui", required_argument, 0, 'i'}, {"interpreter", required_argument, 0, 'i'}, {"i", required_argument, 0, 'i'}, {"directory", required_argument, 0, 'd'}, {"d", required_argument, 0, 'd'}, {"cd", required_argument, 0, OPT_CD}, {"tty", required_argument, 0, 't'}, {"baud", required_argument, 0, 'b'}, {"b", required_argument, 0, 'b'}, {"nw", no_argument, NULL, OPT_NOWINDOWS}, {"nowindows", no_argument, NULL, OPT_NOWINDOWS}, {"w", no_argument, NULL, OPT_WINDOWS}, {"windows", no_argument, NULL, OPT_WINDOWS}, {"statistics", no_argument, 0, OPT_STATISTICS}, {"write", no_argument, &write_files, 1}, {"args", no_argument, &set_args, 1}, {0, no_argument, 0, 0} }; while (1) { int option_index; c = getopt_long_only (argc, argv, "", long_options, &option_index); if (c == EOF || set_args) break; /* Long option that takes an argument. */ if (c == 0 && long_options[option_index].flag == 0) c = long_options[option_index].val; switch (c) { case 0: /* Long option that just sets a flag. */ break; case OPT_SE: symarg = optarg; execarg = optarg; break; case OPT_CD: cdarg = optarg; break; case OPT_ANNOTATE: /* FIXME: what if the syntax is wrong (e.g. not digits)? */ annotation_level = atoi (optarg); break; case OPT_STATISTICS: /* Enable the display of both time and space usage. */ display_time = 1; display_space = 1; break; case OPT_TUI: /* --tui is equivalent to -i=tui. */ xfree (interpreter_p); interpreter_p = xstrdup ("tui"); break; case OPT_WINDOWS: /* FIXME: cagney/2003-03-01: Not sure if this option is actually useful, and if it is, what it should do. */ use_windows = 1; break; case OPT_NOWINDOWS: /* -nw is equivalent to -i=console. */ xfree (interpreter_p); interpreter_p = xstrdup (INTERP_CONSOLE); use_windows = 0; break; case 'f': annotation_level = 1; /* We have probably been invoked from emacs. Disable window interface. */ use_windows = 0; break; case 's': symarg = optarg; break; case 'e': execarg = optarg; break; case 'c': corearg = optarg; break; case 'p': /* "corearg" is shared by "--core" and "--pid" */ corearg = optarg; break; case 'x': cmdarg[ncmd++] = optarg; if (ncmd >= cmdsize) { cmdsize *= 2; cmdarg = (char **) xrealloc ((char *) cmdarg, cmdsize * sizeof (*cmdarg)); } break; #ifdef GDBTK case 'z': { extern int gdbtk_test (char *); if (!gdbtk_test (optarg)) { fprintf_unfiltered (gdb_stderr, _("%s: unable to load tclcommand file \"%s\""), argv[0], optarg); exit (1); } break; } case 'y': /* Backwards compatibility only. */ break; case 'w': { external_editor_command = xstrdup (optarg); break; } #endif /* GDBTK */ case 'i': xfree (interpreter_p); interpreter_p = xstrdup (optarg); break; case 'd': dirarg[ndir++] = optarg; if (ndir >= dirsize) { dirsize *= 2; dirarg = (char **) xrealloc ((char *) dirarg, dirsize * sizeof (*dirarg)); } break; case 't': ttyarg = optarg; break; case 'q': quiet = 1; break; case 'b': { int i; char *p; i = strtol (optarg, &p, 0); if (i == 0 && p == optarg) /* Don't use *_filtered or warning() (which relies on current_target) until after initialize_all_files(). */ fprintf_unfiltered (gdb_stderr, _("warning: could not set baud rate to `%s'.\n"), optarg); else baud_rate = i; } break; case 'l': { int i; char *p; i = strtol (optarg, &p, 0); if (i == 0 && p == optarg) /* Don't use *_filtered or warning() (which relies on current_target) until after initialize_all_files(). */ fprintf_unfiltered (gdb_stderr, _("warning: could not set timeout limit to `%s'.\n"), optarg); else remote_timeout = i; } break; case '?': fprintf_unfiltered (gdb_stderr, _("Use `%s --help' for a complete list of options.\n"), argv[0]); exit (1); } } /* If --help or --version, disable window interface. */ if (print_help || print_version) { use_windows = 0; } if (set_args) { /* The remaining options are the command-line options for the inferior. The first one is the sym/exec file, and the rest are arguments. */ if (optind >= argc) { fprintf_unfiltered (gdb_stderr, _("%s: `--args' specified but no program specified\n"), argv[0]); exit (1); } symarg = argv[optind]; execarg = argv[optind]; ++optind; set_inferior_args_vector (argc - optind, &argv[optind]); } else { /* OK, that's all the options. The other arguments are filenames. */ count = 0; for (; optind < argc; optind++) switch (++count) { case 1: symarg = argv[optind]; execarg = argv[optind]; break; case 2: /* The documentation says this can be a "ProcID" as well. We will try it as both a corefile and a pid. */ corearg = argv[optind]; break; case 3: fprintf_unfiltered (gdb_stderr, _("Excess command line arguments ignored. (%s%s)\n"), argv[optind], (optind == argc - 1) ? "" : " ..."); break; } } if (batch) quiet = 1; } /* Initialize all files. Give the interpreter a chance to take control of the console via the deprecated_init_ui_hook(). */ gdb_init (argv[0]); /* Do these (and anything which might call wrap_here or *_filtered) after initialize_all_files() but before the interpreter has been installed. Otherwize the help/version messages will be eaten by the interpreter's output handler. */ if (print_version) { print_gdb_version (gdb_stdout); wrap_here (""); printf_filtered ("\n"); exit (0); } if (print_help) { print_gdb_help (gdb_stdout); fputs_unfiltered ("\n", gdb_stdout); exit (0); } /* FIXME: cagney/2003-02-03: The big hack (part 1 of 2) that lets GDB retain the old MI1 interpreter startup behavior. Output the copyright message before the interpreter is installed. That way it isn't encapsulated in MI output. */ if (!quiet && strcmp (interpreter_p, INTERP_MI1) == 0) { /* Print all the junk at the top, with trailing "..." if we are about to read a symbol file (possibly slowly). */ print_gdb_version (gdb_stdout); if (symarg) printf_filtered (".."); wrap_here (""); gdb_flush (gdb_stdout); /* Force to screen during slow operations */ } /* Install the default UI. All the interpreters should have had a look at things by now. Initialize the default interpreter. */ { /* Find it. */ struct interp *interp = interp_lookup (interpreter_p); if (interp == NULL) error ("Interpreter `%s' unrecognized", interpreter_p); /* Install it. */ if (!interp_set (interp)) { fprintf_unfiltered (gdb_stderr, "Interpreter `%s' failed to initialize.\n", interpreter_p); exit (1); } } /* FIXME: cagney/2003-02-03: The big hack (part 2 of 2) that lets GDB retain the old MI1 interpreter startup behavior. Output the copyright message after the interpreter is installed when it is any sane interpreter. */ if (!quiet && !current_interp_named_p (INTERP_MI1)) { /* Print all the junk at the top, with trailing "..." if we are about to read a symbol file (possibly slowly). */ print_gdb_version (gdb_stdout); if (symarg) printf_filtered (".."); wrap_here (""); gdb_flush (gdb_stdout); /* Force to screen during slow operations */ } error_pre_print = "\n\n"; quit_pre_print = error_pre_print; /* We may get more than one warning, don't double space all of them... */ warning_pre_print = _("\nwarning: "); /* Read and execute $HOME/.gdbinit file, if it exists. This is done *before* all the command line arguments are processed; it sets global parameters, which are independent of what file you are debugging or what directory you are in. */ homedir = getenv ("HOME"); if (homedir) { homeinit = (char *) alloca (strlen (homedir) + strlen (gdbinit) + 10); strcpy (homeinit, homedir); strcat (homeinit, "/"); strcat (homeinit, gdbinit); if (!inhibit_gdbinit) { catch_command_errors (source_command, homeinit, 0, RETURN_MASK_ALL); } /* Do stats; no need to do them elsewhere since we'll only need them if homedir is set. Make sure that they are zero in case one of them fails (this guarantees that they won't match if either exists). */ memset (&homebuf, 0, sizeof (struct stat)); memset (&cwdbuf, 0, sizeof (struct stat)); stat (homeinit, &homebuf); stat (gdbinit, &cwdbuf); /* We'll only need this if homedir was set. */ } /* Now perform all the actions indicated by the arguments. */ if (cdarg != NULL) { catch_command_errors (cd_command, cdarg, 0, RETURN_MASK_ALL); } for (i = 0; i < ndir; i++) catch_command_errors (directory_command, dirarg[i], 0, RETURN_MASK_ALL); xfree (dirarg); if (execarg != NULL && symarg != NULL && strcmp (execarg, symarg) == 0) { /* The exec file and the symbol-file are the same. If we can't open it, better only print one error message. catch_command_errors returns non-zero on success! */ if (catch_command_errors (exec_file_attach, execarg, !batch, RETURN_MASK_ALL)) catch_command_errors (symbol_file_add_main, symarg, 0, RETURN_MASK_ALL); } else { if (execarg != NULL) catch_command_errors (exec_file_attach, execarg, !batch, RETURN_MASK_ALL); if (symarg != NULL) catch_command_errors (symbol_file_add_main, symarg, 0, RETURN_MASK_ALL); } /* After the symbol file has been read, print a newline to get us beyond the copyright line... But errors should still set off the error message with a (single) blank line. */ if (!quiet) printf_filtered ("\n"); error_pre_print = "\n"; quit_pre_print = error_pre_print; warning_pre_print = _("\nwarning: "); if (corearg != NULL) { /* corearg may be either a corefile or a pid. If its first character is a digit, try attach first and then corefile. Otherwise try corefile first. */ if (isdigit (corearg[0])) { if (catch_command_errors (attach_command, corearg, !batch, RETURN_MASK_ALL) == 0) catch_command_errors (core_file_command, corearg, !batch, RETURN_MASK_ALL); } else /* Can't be a pid, better be a corefile. */ catch_command_errors (core_file_command, corearg, !batch, RETURN_MASK_ALL); } if (ttyarg != NULL) catch_command_errors (tty_command, ttyarg, !batch, RETURN_MASK_ALL); /* Error messages should no longer be distinguished with extra output. */ error_pre_print = NULL; quit_pre_print = NULL; warning_pre_print = _("warning: "); /* Read the .gdbinit file in the current directory, *if* it isn't the same as the $HOME/.gdbinit file (it should exist, also). */ if (!homedir || memcmp ((char *) &homebuf, (char *) &cwdbuf, sizeof (struct stat))) if (!inhibit_gdbinit) { catch_command_errors (source_command, gdbinit, 0, RETURN_MASK_ALL); } for (i = 0; i < ncmd; i++) { #if 0 /* NOTE: cagney/1999-11-03: SET_TOP_LEVEL() was a macro that expanded into a call to setjmp(). */ if (!SET_TOP_LEVEL ()) /* NB: This is #if 0'd out */ { /* NOTE: I am commenting this out, because it is not clear where this feature is used. It is very old and undocumented. ezannoni: 1999-05-04 */ #if 0 if (cmdarg[i][0] == '-' && cmdarg[i][1] == '\0') read_command_file (stdin); else #endif source_command (cmdarg[i], !batch); do_cleanups (ALL_CLEANUPS); } #endif catch_command_errors (source_command, cmdarg[i], !batch, RETURN_MASK_ALL); } xfree (cmdarg); /* Read in the old history after all the command files have been read. */ init_history (); if (batch) { if (attach_flag) /* Either there was a problem executing the command in the batch file aborted early, or the batch file forgot to do an explicit detach. Explicitly detach the inferior ensuring that there are no zombies. */ target_detach (NULL, 0); /* We have hit the end of the batch file. */ exit (0); } /* Do any host- or target-specific hacks. This is used for i960 targets to force the user to set a nindy target and spec its parameters. */ #ifdef BEFORE_MAIN_LOOP_HOOK BEFORE_MAIN_LOOP_HOOK; #endif /* Show time and/or space usage. */ if (display_time) { long init_time = get_run_time () - time_at_startup; printf_unfiltered (_("Startup time: %ld.%06ld\n"), init_time / 1000000, init_time % 1000000); } if (display_space) { #ifdef HAVE_SBRK extern char **environ; char *lim = (char *) sbrk (0); printf_unfiltered (_("Startup size: data size %ld\n"), (long) (lim - (char *) &environ)); #endif } #if 0 /* FIXME: cagney/1999-11-06: The original main loop was like: */ while (1) { if (!SET_TOP_LEVEL ()) { do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */ /* GUIs generally have their own command loop, mainloop, or whatever. This is a good place to gain control because many error conditions will end up here via longjmp(). */ if (deprecated_command_loop_hook) deprecated_command_loop_hook (); else deprecated_command_loop (); quit_command ((char *) 0, instream == stdin); } } /* NOTE: If the command_loop() returned normally, the loop would attempt to exit by calling the function quit_command(). That function would either call exit() or throw an error returning control to SET_TOP_LEVEL. */ /* NOTE: The function do_cleanups() was called once each time round the loop. The usefulness of the call isn't clear. If an error was thrown, everything would have already been cleaned up. If command_loop() returned normally and quit_command() was called, either exit() or error() (again cleaning up) would be called. */ #endif /* NOTE: cagney/1999-11-07: There is probably no reason for not moving this loop and the code found in captured_command_loop() into the command_loop() proper. The main thing holding back that change - SET_TOP_LEVEL() - has been eliminated. */ while (1) { catch_errors (captured_command_loop, 0, "", RETURN_MASK_ALL); } /* No exit -- exit is through quit_command. */ }
static int captured_main (void *data) { /* If you add initializations here, you also need to add then to the proc do_steps_and_nexts in selftest.exp. */ struct captured_main_args *context = data; int argc = context->argc; char **argv = context->argv; int count; static int quiet = 0; static int batch = 0; static int set_args = 0; /* Pointers to various arguments from command line. */ char *symarg = NULL; char *execarg = NULL; char *corearg = NULL; char *cdarg = NULL; char *ttyarg = NULL; /* APPLE LOCAL: Set the osabi via option. */ char *osabiarg = NULL; /* These are static so that we can take their address in an initializer. */ static int print_help; static int print_version; /* Pointers to all arguments of --command option. */ char **cmdarg; /* Allocated size of cmdarg. */ int cmdsize; /* Number of elements of cmdarg used. */ int ncmd; /* Indices of all arguments of --directory option. */ char **dirarg; /* Allocated size. */ int dirsize; /* Number of elements used. */ int ndir; /* APPLE LOCAL globalbuf */ struct stat homebuf, cwdbuf, globalbuf; char *homedir; /* APPLE LOCAL attach -waitfor */ char *attach_waitfor = NULL; /* APPLE LOCAL: set the architecture. */ char *initial_arch = NULL; int i; long time_at_startup = get_run_time (); #if defined (HAVE_SETLOCALE) && defined (HAVE_LC_MESSAGES) setlocale (LC_MESSAGES, ""); #endif #if defined (HAVE_SETLOCALE) setlocale (LC_CTYPE, ""); #endif bindtextdomain (PACKAGE, LOCALEDIR); textdomain (PACKAGE); /* APPLE LOCAL memory */ #ifdef USE_MMALLOC init_mmalloc_default_pool ((PTR) NULL); #endif /* This needs to happen before the first use of malloc. */ init_malloc (NULL); #ifdef HAVE_SBRK lim_at_start = (char *) sbrk (0); #endif #if defined (ALIGN_STACK_ON_STARTUP) i = (int) &count & 0x3; if (i != 0) alloca (4 - i); #endif cmdsize = 1; cmdarg = (char **) xmalloc (cmdsize * sizeof (*cmdarg)); ncmd = 0; dirsize = 1; dirarg = (char **) xmalloc (dirsize * sizeof (*dirarg)); ndir = 0; quit_flag = 0; line = (char *) xmalloc (linesize); line[0] = '\0'; /* Terminate saved (now empty) cmd line */ instream = stdin; getcwd (gdb_dirbuf, sizeof (gdb_dirbuf)); current_directory = gdb_dirbuf; /* APPLE LOCAL gdb_null */ gdb_null = ui_file_new (); gdb_stdout = stdio_fileopen (stdout); gdb_stderr = stdio_fileopen (stderr); gdb_stdlog = gdb_stderr; /* for moment */ gdb_stdtarg = gdb_stderr; /* for moment */ gdb_stdin = stdio_fileopen (stdin); gdb_stdtargerr = gdb_stderr; /* for moment */ gdb_stdtargin = gdb_stdin; /* for moment */ /* APPLE LOCAL: set our main thread's name */ #ifdef HAVE_PTHREAD_SETNAME_NP pthread_setname_np ("gdb main thread"); #endif /* Set the sysroot path. */ #ifdef TARGET_SYSTEM_ROOT_RELOCATABLE gdb_sysroot = make_relative_prefix (argv[0], BINDIR, TARGET_SYSTEM_ROOT); if (gdb_sysroot) { struct stat s; int res = 0; if (stat (gdb_sysroot, &s) == 0) if (S_ISDIR (s.st_mode)) res = 1; if (res == 0) { xfree (gdb_sysroot); gdb_sysroot = TARGET_SYSTEM_ROOT; } } else gdb_sysroot = TARGET_SYSTEM_ROOT; #else #if defined (TARGET_SYSTEM_ROOT) gdb_sysroot = TARGET_SYSTEM_ROOT; #else gdb_sysroot = ""; #endif #endif /* There will always be an interpreter. Either the one passed into this captured main, or one specified by the user at start up, or the console. Initialize the interpreter to the one requested by the application. */ interpreter_p = xstrdup (context->interpreter_p); /* Parse arguments and options. */ { int c; /* When var field is 0, use flag field to record the equivalent short option (or arbitrary numbers starting at 10 for those with no equivalent). */ enum { OPT_SE = 10, OPT_CD, OPT_ANNOTATE, OPT_STATISTICS, OPT_TUI, OPT_NOWINDOWS, OPT_WINDOWS, OPT_WAITFOR, /* APPLE LOCAL */ OPT_ARCH, /* APPLE LOCAL */ OPT_OSABI /* APPLE LOCAL */ }; static struct option long_options[] = { #if defined(TUI) {"tui", no_argument, 0, OPT_TUI}, #endif {"xdb", no_argument, &xdb_commands, 1}, {"dbx", no_argument, &dbx_commands, 1}, {"readnow", no_argument, &readnow_symbol_files, 1}, {"r", no_argument, &readnow_symbol_files, 1}, {"quiet", no_argument, &quiet, 1}, {"q", no_argument, &quiet, 1}, {"silent", no_argument, &quiet, 1}, {"nx", no_argument, &inhibit_gdbinit, 1}, {"n", no_argument, &inhibit_gdbinit, 1}, {"batch", no_argument, &batch, 1}, {"epoch", no_argument, &epoch_interface, 1}, /* This is a synonym for "--annotate=1". --annotate is now preferred, but keep this here for a long time because people will be running emacses which use --fullname. */ {"fullname", no_argument, 0, 'f'}, {"f", no_argument, 0, 'f'}, {"annotate", required_argument, 0, OPT_ANNOTATE}, {"help", no_argument, &print_help, 1}, {"se", required_argument, 0, OPT_SE}, {"symbols", required_argument, 0, 's'}, {"s", required_argument, 0, 's'}, {"exec", required_argument, 0, 'e'}, {"e", required_argument, 0, 'e'}, {"core", required_argument, 0, 'c'}, {"c", required_argument, 0, 'c'}, {"pid", required_argument, 0, 'p'}, {"p", required_argument, 0, 'p'}, {"command", required_argument, 0, 'x'}, {"version", no_argument, &print_version, 1}, {"x", required_argument, 0, 'x'}, #ifdef GDBTK {"tclcommand", required_argument, 0, 'z'}, {"enable-external-editor", no_argument, 0, 'y'}, {"editor-command", required_argument, 0, 'w'}, #endif {"ui", required_argument, 0, 'i'}, {"interpreter", required_argument, 0, 'i'}, {"i", required_argument, 0, 'i'}, {"directory", required_argument, 0, 'd'}, {"d", required_argument, 0, 'd'}, {"cd", required_argument, 0, OPT_CD}, {"tty", required_argument, 0, 't'}, {"baud", required_argument, 0, 'b'}, {"b", required_argument, 0, 'b'}, {"nw", no_argument, NULL, OPT_NOWINDOWS}, {"nowindows", no_argument, NULL, OPT_NOWINDOWS}, {"w", no_argument, NULL, OPT_WINDOWS}, {"windows", no_argument, NULL, OPT_WINDOWS}, {"statistics", no_argument, 0, OPT_STATISTICS}, {"write", no_argument, &write_files, 1}, {"args", no_argument, &set_args, 1}, /* APPLE LOCAL: */ {"waitfor", required_argument, 0, OPT_WAITFOR}, /* APPLE LOCAL: */ {"arch", required_argument, 0, OPT_ARCH}, /* APPLE LOCAL: */ {"osabi", required_argument, 0, OPT_OSABI}, {"l", required_argument, 0, 'l'}, {0, no_argument, 0, 0} }; while (1) { int option_index; c = getopt_long_only (argc, argv, "", long_options, &option_index); if (c == EOF || set_args) break; /* Long option that takes an argument. */ if (c == 0 && long_options[option_index].flag == 0) c = long_options[option_index].val; switch (c) { case 0: /* Long option that just sets a flag. */ break; case OPT_SE: symarg = optarg; execarg = optarg; break; case OPT_CD: cdarg = optarg; break; case OPT_ANNOTATE: /* FIXME: what if the syntax is wrong (e.g. not digits)? */ annotation_level = atoi (optarg); break; case OPT_STATISTICS: /* Enable the display of both time and space usage. */ display_time = 1; display_space = 1; break; case OPT_TUI: /* --tui is equivalent to -i=tui. */ xfree (interpreter_p); interpreter_p = xstrdup ("tui"); break; case OPT_WINDOWS: /* FIXME: cagney/2003-03-01: Not sure if this option is actually useful, and if it is, what it should do. */ use_windows = 1; break; case OPT_NOWINDOWS: /* -nw is equivalent to -i=console. */ xfree (interpreter_p); interpreter_p = xstrdup (INTERP_CONSOLE); use_windows = 0; break; /* APPLE LOCAL: */ case OPT_WAITFOR: attach_waitfor = (char *) xmalloc (12 + strlen (optarg)); sprintf (attach_waitfor, "-waitfor \"%s\"", optarg); break; /* APPLE LOCAL: */ case OPT_ARCH: initial_arch = xstrdup (optarg); break; /* APPLE LOCAL: Set the osabi via option. This option was added along with a modification to the gdb driver shell script for armv6. Binaries with the "arm" architecture (ARM v4T) and "armv6" (ARM v6) can be inter mixed on armv6 capaable targets since all instructions in the ARM v4T instruction set are present in the ARM v6 instruction set. The same gdb executable is used for both, and the osabi set/show variable controls which gets used for cross targets. We need to set this variable prior to loading any executables so that the correct slice of a fat file can be selected. Now gdb can be launched with the "armv6" arch along with an executable and the correct slice will be selected: gdb -arch armv6 <file> */ case OPT_OSABI: osabiarg = optarg; break; /* APPLE LOCAL END */ case 'f': annotation_level = 1; /* We have probably been invoked from emacs. Disable window interface. */ use_windows = 0; break; case 's': symarg = optarg; break; case 'e': execarg = optarg; break; case 'c': corearg = optarg; break; case 'p': /* "corearg" is shared by "--core" and "--pid" */ corearg = optarg; break; case 'x': cmdarg[ncmd++] = optarg; if (ncmd >= cmdsize) { cmdsize *= 2; cmdarg = (char **) xrealloc ((char *) cmdarg, cmdsize * sizeof (*cmdarg)); } break; #ifdef GDBTK case 'z': { extern int gdbtk_test (char *); if (!gdbtk_test (optarg)) { fprintf_unfiltered (gdb_stderr, _("%s: unable to load tclcommand file \"%s\""), argv[0], optarg); exit (1); } break; } case 'y': /* Backwards compatibility only. */ break; case 'w': { external_editor_command = xstrdup (optarg); break; } #endif /* GDBTK */ case 'i': xfree (interpreter_p); interpreter_p = xstrdup (optarg); break; case 'd': dirarg[ndir++] = optarg; if (ndir >= dirsize) { dirsize *= 2; dirarg = (char **) xrealloc ((char *) dirarg, dirsize * sizeof (*dirarg)); } break; case 't': ttyarg = optarg; break; case 'q': quiet = 1; break; case 'b': { int i; char *p; i = strtol (optarg, &p, 0); if (i == 0 && p == optarg) /* Don't use *_filtered or warning() (which relies on current_target) until after initialize_all_files(). */ fprintf_unfiltered (gdb_stderr, _("warning: could not set baud rate to `%s'.\n"), optarg); else baud_rate = i; } break; case 'l': { int i; char *p; i = strtol (optarg, &p, 0); if (i == 0 && p == optarg) /* Don't use *_filtered or warning() (which relies on current_target) until after initialize_all_files(). */ fprintf_unfiltered (gdb_stderr, _("warning: could not set timeout limit to `%s'.\n"), optarg); else remote_timeout = i; } break; case '?': fprintf_unfiltered (gdb_stderr, _("Use `%s --help' for a complete list of options.\n"), argv[0]); exit (1); } } /* If --help or --version, disable window interface. */ if (print_help || print_version) { use_windows = 0; } if (set_args) { /* The remaining options are the command-line options for the inferior. The first one is the sym/exec file, and the rest are arguments. */ if (optind >= argc) { fprintf_unfiltered (gdb_stderr, _("%s: `--args' specified but no program specified\n"), argv[0]); exit (1); } symarg = argv[optind]; execarg = argv[optind]; ++optind; set_inferior_args_vector (argc - optind, &argv[optind]); } else { /* OK, that's all the options. The other arguments are filenames. */ count = 0; for (; optind < argc; optind++) switch (++count) { case 1: symarg = argv[optind]; execarg = argv[optind]; break; case 2: /* The documentation says this can be a "ProcID" as well. We will try it as both a corefile and a pid. */ corearg = argv[optind]; break; case 3: fprintf_unfiltered (gdb_stderr, _("Excess command line arguments ignored. (%s%s)\n"), argv[optind], (optind == argc - 1) ? "" : " ..."); break; } } if (batch) quiet = 1; } /* Initialize all files. Give the interpreter a chance to take control of the console via the deprecated_init_ui_hook (). */ gdb_init (argv[0]); /* Do these (and anything which might call wrap_here or *_filtered) after initialize_all_files() but before the interpreter has been installed. Otherwize the help/version messages will be eaten by the interpreter's output handler. */ if (print_version) { print_gdb_version (gdb_stdout); wrap_here (""); printf_filtered ("\n"); exit (0); } if (print_help) { print_gdb_help (gdb_stdout); fputs_unfiltered ("\n", gdb_stdout); exit (0); } /* FIXME: cagney/2003-02-03: The big hack (part 1 of 2) that lets GDB retain the old MI1 interpreter startup behavior. Output the copyright message before the interpreter is installed. That way it isn't encapsulated in MI output. */ if (!quiet && strcmp (interpreter_p, INTERP_MI1) == 0) { /* APPLE LOCAL begin don't print dots */ /* Print all the junk at the top. */ print_gdb_version (gdb_stdout); printf_filtered ("\n"); /* APPLE LOCAL end don't print dots */ wrap_here (""); gdb_flush (gdb_stdout); /* Force to screen during slow operations */ } /* APPLE LOCAL begin */ if (state_change_hook) { state_change_hook (STATE_ACTIVE); } /* APPLE LOCAL end */ /* Install the default UI. All the interpreters should have had a look at things by now. Initialize the default interpreter. */ { /* Find it. */ struct interp *interp = interp_lookup (interpreter_p); if (interp == NULL) error (_("Interpreter `%s' unrecognized"), interpreter_p); /* Install it. */ /* APPLE LOCAL clarity */ if (interp_set (interp) == NULL) { fprintf_unfiltered (gdb_stderr, "Interpreter `%s' failed to initialize.\n", interpreter_p); exit (1); } } /* FIXME: cagney/2003-02-03: The big hack (part 2 of 2) that lets GDB retain the old MI1 interpreter startup behavior. Output the copyright message after the interpreter is installed when it is any sane interpreter. */ if (!quiet && !current_interp_named_p (INTERP_MI1)) { /* Print all the junk at the top, with trailing "..." if we are about to read a symbol file (possibly slowly). */ print_gdb_version (gdb_stdout); if (symarg) printf_filtered (".."); wrap_here (""); gdb_flush (gdb_stdout); /* Force to screen during slow operations */ } error_pre_print = "\n\n"; quit_pre_print = error_pre_print; /* We may get more than one warning, don't double space all of them... */ warning_pre_print = _("\nwarning: "); /* APPLE LOCAL begin move inits up */ /* Make sure that they are zero in case one of them fails (this guarantees that they won't match if either exists). */ memset (&homebuf, 0, sizeof (struct stat)); memset (&cwdbuf, 0, sizeof (struct stat)); /* APPLE LOCAL end move inits up */ /* APPLE LOCAL begin global gdbinit */ memset (&globalbuf, 0, sizeof (struct stat)); stat (gdbinit_global, &globalbuf); if (!inhibit_gdbinit) { /* if (!SET_TOP_LEVEL ()) */ source_file (gdbinit_global, 0); } do_cleanups (ALL_CLEANUPS); /* APPLE LOCAL end global gdbinit */ /* APPLE LOCAL: Set the $_Xcode convenience variable at '0' before sourcing any .gdbinit files. Xcode will override this to 1 when it is launching gdb but we need to start with a value of 0 so .gdbinit files can use it in conditional expressions. */ set_internalvar (lookup_internalvar ("_Xcode"), value_from_longest (builtin_type_int, (LONGEST) 0)); /* Read and execute $HOME/.gdbinit file, if it exists. This is done *before* all the command line arguments are processed; it sets global parameters, which are independent of what file you are debugging or what directory you are in. */ homedir = getenv ("HOME"); if (homedir) { char *homeinit = xstrprintf ("%s/%s", homedir, gdbinit); /* APPLE LOCAL move inits up */ stat (homeinit, &homebuf); /* APPLE LOCAL gdbinit */ if (!inhibit_gdbinit) if ((globalbuf.st_dev != homebuf.st_dev) || (globalbuf.st_ino != homebuf.st_ino)) { catch_command_errors (source_file, homeinit, 0, RETURN_MASK_ALL); } } /* Now perform all the actions indicated by the arguments. */ if (cdarg != NULL) { catch_command_errors (cd_command, cdarg, 0, RETURN_MASK_ALL); } for (i = 0; i < ndir; i++) catch_command_errors (directory_command, dirarg[i], 0, RETURN_MASK_ALL); xfree (dirarg); /* APPLE LOCAL: If an architecture has been supplied, process it. FIXME: Note, this is a TOTAL hack. There should be some gdbarch'y type function that processes these options. The odd thing is that you would want the SAME function for all the gdbarch'es that are registered, so it actually lives a little above the gdbarch.... Not sure how to do that. So instead, I just hack... */ #if defined (USE_POSIX_SPAWN) || defined (USE_ARCH_FOR_EXEC) if (initial_arch != NULL) { char *arch_string = NULL; char *osabi_string; #if defined (TARGET_POWERPC) if (strcmp (initial_arch, "ppc") == 0) { arch_string = "powerpc:common"; osabi_string = "Darwin"; } else if (strcmp (initial_arch, "ppc64") == 0) { arch_string = "powerpc:common64"; osabi_string = "Darwin64"; } else warning ("invalid argument \"%s\" for \"--arch\", should be one of " "\"ppc\" or \"ppc64\"\n", initial_arch); #elif defined (TARGET_I386) if (strcmp (initial_arch, "i386") == 0) { arch_string = "i386"; osabi_string = "Darwin"; } else if (strcmp (initial_arch, "x86_64") == 0) { arch_string = "i386:x86-64"; osabi_string = "Darwin64"; } else warning ("invalid argument \"%s\" for \"--arch\", should be one of " "\"i386\" or \"x86_64\"\n", initial_arch); #elif defined (TARGET_ARM) if (strcmp (initial_arch, "arm") == 0) { arch_string = "arm"; osabi_string = "Darwin"; } else if (strcmp (initial_arch, "armv6") == 0) { arch_string = "armv6"; osabi_string = "DarwinV6"; } else warning ("invalid argument \"%s\" for \"--arch\", should be one of " "\"armv\" or \"armv6\"\n", initial_arch); #endif if (arch_string != NULL) { set_architecture_from_string (arch_string); set_osabi_from_string (osabi_string); } } #else warning ("--arch option not supported in this gdb."); #endif /* APPLE LOCAL BEGIN: Set the osabi via option. */ if (osabiarg != NULL) set_osabi_option (osabiarg); /* APPLE LOCAL END */ if (execarg != NULL && symarg != NULL && strcmp (execarg, symarg) == 0) { /* The exec file and the symbol-file are the same. If we can't open it, better only print one error message. catch_command_errors returns non-zero on success! */ if (catch_command_errors (exec_file_attach, execarg, !batch, RETURN_MASK_ALL)) catch_command_errors (symbol_file_add_main, symarg, 0, RETURN_MASK_ALL); } else { if (execarg != NULL) catch_command_errors (exec_file_attach, execarg, !batch, RETURN_MASK_ALL); if (symarg != NULL) catch_command_errors (symbol_file_add_main, symarg, 0, RETURN_MASK_ALL); } /* APPLE LOCAL begin */ if (state_change_hook && symarg != NULL) { state_change_hook (STATE_INFERIOR_LOADED); } /* APPLE LOCAL end */ /* APPLE LOCAL begin */ if (attach_waitfor != NULL) { printf_filtered ("\n"); catch_command_errors (attach_command, attach_waitfor, 0, RETURN_MASK_ALL); } /* After the symbol file has been read, print a newline to get us beyond the copyright line... But errors should still set off the error message with a (single) blank line. */ if (!quiet) printf_filtered ("\n"); error_pre_print = "\n"; quit_pre_print = error_pre_print; warning_pre_print = _("\nwarning: "); if (corearg != NULL) { if (catch_command_errors (core_file_attach, corearg, !batch, RETURN_MASK_ALL) == 0) { /* See if the core file is really a PID. */ /* Be careful, we have quoted the corearg above... */ if (corearg[0] == '"') { int len = strlen (corearg); if (corearg[len - 1] == '"') { corearg[len - 1] = '\0'; corearg += 1; } } if (isdigit (corearg[0])) catch_command_errors (attach_command, corearg, !batch, RETURN_MASK_ALL); } } if (ttyarg != NULL) catch_command_errors (tty_command, ttyarg, !batch, RETURN_MASK_ALL); /* Error messages should no longer be distinguished with extra output. */ error_pre_print = NULL; quit_pre_print = NULL; warning_pre_print = _("warning: "); /* Read the .gdbinit file in the current directory, *if* it isn't the same as the $HOME/.gdbinit file (it should exist, also). */ stat (gdbinit, &cwdbuf); if (!inhibit_gdbinit) if (((globalbuf.st_dev != cwdbuf.st_dev) || (globalbuf.st_ino != cwdbuf.st_ino)) && ((homebuf.st_dev != cwdbuf.st_dev) || (homebuf.st_ino != cwdbuf.st_ino))) { /* APPLE LOCAL: fix for CVE-2005-1705 */ if (cwdbuf.st_uid == getuid ()) catch_command_errors (source_file, gdbinit, 0, RETURN_MASK_ALL); } /* These need to be set this late in the initialization to ensure that they are defined for the current environment. They define the radix variables needed by a save-breakpoints file to preserve the radix across the breakpoints restoration assuming they are restored using the -x (-command) command line options. */ set_internalvar (lookup_internalvar ("input_radix"), value_from_longest (builtin_type_int, (LONGEST) input_radix)); set_internalvar (lookup_internalvar ("output_radix"), value_from_longest (builtin_type_int, (LONGEST) output_radix)); for (i = 0; i < ncmd; i++) { #if 0 /* NOTE: cagney/1999-11-03: SET_TOP_LEVEL() was a macro that expanded into a call to setjmp(). */ if (!SET_TOP_LEVEL ()) /* NB: This is #if 0'd out */ { /* NOTE: I am commenting this out, because it is not clear where this feature is used. It is very old and undocumented. ezannoni: 1999-05-04 */ #if 0 if (cmdarg[i][0] == '-' && cmdarg[i][1] == '\0') read_command_file (stdin); else #endif source_file (cmdarg[i], !batch); do_cleanups (ALL_CLEANUPS); } #endif catch_command_errors (source_file, cmdarg[i], !batch, RETURN_MASK_ALL); } xfree (cmdarg); /* Read in the old history after all the command files have been read. */ init_history (); if (batch) { if (attach_flag) /* Either there was a problem executing the command in the batch file aborted early, or the batch file forgot to do an explicit detach. Explicitly detach the inferior ensuring that there are no zombies. */ target_detach (NULL, 0); /* We have hit the end of the batch file. */ exit (0); } /* Do any host- or target-specific hacks. This is used for i960 targets to force the user to set a nindy target and spec its parameters. */ #ifdef BEFORE_MAIN_LOOP_HOOK BEFORE_MAIN_LOOP_HOOK; #endif /* Show time and/or space usage. */ if (display_time) { long init_time = get_run_time () - time_at_startup; printf_unfiltered (_("Startup time: %ld.%06ld\n"), init_time / 1000000, init_time % 1000000); } if (display_space) { #ifdef HAVE_SBRK extern char **environ; char *lim = (char *) sbrk (0); printf_unfiltered (_("Startup size: data size %ld\n"), (long) (lim - (char *) &environ)); #endif } #if 0 /* FIXME: cagney/1999-11-06: The original main loop was like: */ while (1) { if (!SET_TOP_LEVEL ()) { do_cleanups (ALL_CLEANUPS); /* Do complete cleanup */ /* GUIs generally have their own command loop, mainloop, or whatever. This is a good place to gain control because many error conditions will end up here via longjmp(). */ if (deprecated_command_loop_hook) deprecated_command_loop_hook (); else deprecated_command_loop (); quit_command ((char *) 0, instream == stdin); } } /* NOTE: If the command_loop() returned normally, the loop would attempt to exit by calling the function quit_command(). That function would either call exit() or throw an error returning control to SET_TOP_LEVEL. */ /* NOTE: The function do_cleanups() was called once each time round the loop. The usefulness of the call isn't clear. If an error was thrown, everything would have already been cleaned up. If command_loop() returned normally and quit_command() was called, either exit() or error() (again cleaning up) would be called. */ #endif /* NOTE: cagney/1999-11-07: There is probably no reason for not moving this loop and the code found in captured_command_loop() into the command_loop() proper. The main thing holding back that change - SET_TOP_LEVEL() - has been eliminated. */ while (1) { catch_errors (captured_command_loop, 0, "", RETURN_MASK_ALL); } /* No exit -- exit is through quit_command. */ }
void request_check(int index, char* buf){ char tokens[MAX_MSG_TOKENS][MAX_MSG_LEN+1]; int arg_num = tokenize(buf,tokens); int type,connfd; connfd = p.clientfd[index]; if (!strcmp(tokens[0],"USER")) type = USER_CMD; else if(!strcmp(tokens[0],"NICK")) type = NICK_CMD; else if(!strcmp(tokens[0],"JOIN")) type = JOIN_CMD; else if(!strcmp(tokens[0],"QUIT")) type = QUIT_CMD; else if(!strcmp(tokens[0],"PART")) type = PART_CMD; else if(!strcmp(tokens[0],"LIST")) type = LIST_CMD; else if(!strcmp(tokens[0],"WHO")) type = WHO_CMD; else if(!strcmp(tokens[0],"PRIVMSG")) type = PRIVMSG_CMD; else type = UNKONWN_CMD; //DEBUG int i; printf(" # CMD:%s\t ARG_NUM:%d\t",tokens[0],arg_num); for(i=0;i<4;i++) printf(" ARG%d:%s\t",i,tokens[i+1]); printf("\n"); if(type == UNKONWN_CMD) unknown_command(connfd,tokens[0]); else if(arg_num < ARG_NUM[type]){ char msg[MAX_MSG_LEN]; if(type == NICK_CMD) /* NICK ERRRO TYPE: ERR_NOERR_NONICKNAMEGIVEN */ snprintf(msg,MAX_MSG_LEN,":No nickname given\n"); else if(type == PRIVMSG_CMD){ /* PRIVMSG ERRRO TYPE: ERR_NORECIPIENT */ if(!arg_num) snprintf(msg,MAX_MSG_LEN,":No recipient given PRIVMSG\n"); /* PRIVMSG ERRRO TYPE: ERR_NOTEXTTOSEND */ else snprintf(msg,MAX_MSG_LEN,":No text to send\n"); }else snprintf(msg,MAX_MSG_LEN,"%s:Not enough parameters\n", tokens[0]); send_msg_back(connfd,msg); } else switch(type){ case QUIT_CMD: quit_command(index); break; case USER_CMD: user_command(connfd,tokens[1],tokens[4]); break; case NICK_CMD: nick_command(connfd,tokens[1]); break; default: if(check_register(connfd)){ switch(type){ case JOIN_CMD: join_command(connfd,tokens[1]); break; case PART_CMD: part_command(connfd,tokens[1],1); break; case LIST_CMD: list_command(connfd); break; case WHO_CMD: who_command(connfd,tokens[1]); break; case PRIVMSG_CMD: privmsg_command(connfd,tokens[1],tokens[2]); } }else send_msg_back(connfd,":You have not registered\n"); } }