Пример #1
0
void mips_read_watch_registers(void)
{
	struct mips3264_watch_reg_state *watches =
		&current->thread.watch.mips3264;
	switch (current_cpu_data.watch_reg_use_cnt) {
	default:
		BUG();
	case 4:
		watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff);
	case 3:
		watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff);
	case 2:
		watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff);
	case 1:
		watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff);
	}
	if (current_cpu_data.watch_reg_use_cnt == 1 &&
	    (watches->watchhi[0] & 7) == 0) {
		/* Pathological case of release 1 architecture that
		 * doesn't set the condition bits.  We assume that
		 * since we got here, the watch condition was met and
		 * signal that the conditions requested in watchlo
		 * were met.  */
		watches->watchhi[0] |= (watches->watchlo[0] & 7);
	}
 }
Пример #2
0
/*
 * Read back the watchhi registers so the user space debugger has
 * access to the I, R, and W bits.  A maximum of four registers are
 * read although the machine may have more.
 */
void rlx_read_watch_registers(void)
{
	struct rlx3264_watch_reg_state *watches =
		&current->thread.watch.rlx3264;
	unsigned int wmpstatus = read_lxc0_wmpstatus();

	switch (current_cpu_data.watch_reg_use_cnt) {
	default:
		BUG();
	case 4:
		watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff);
		if (wmpstatus & WMPSTATUSF_EM3)
			watches->watchhi[3] |= (wmpstatus & 0x7);
	case 3:
		watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff);
		if (wmpstatus & WMPSTATUSF_EM2)
			watches->watchhi[2] |= (wmpstatus & 0x7);
	case 2:
		watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff);
		if (wmpstatus & WMPSTATUSF_EM1)
			watches->watchhi[1] |= (wmpstatus & 0x7);
	case 1:
		watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff);
		if (wmpstatus & WMPSTATUSF_EM0)
			watches->watchhi[0] |= (wmpstatus & 0x7);
	}

	/* read badvaddr that caused watch or mpu exception */
	watches->wmpvaddr = read_lxc0_wmpvaddr();
 }
Пример #3
0
void mips_read_watch_registers(void)
{
	struct mips3264_watch_reg_state *watches =
		&current->thread.watch.mips3264;
	switch (current_cpu_data.watch_reg_use_cnt) {
	default:
		BUG();
	case 4:
		watches->watchhi[3] = (read_c0_watchhi3() & 0x0fff);
	case 3:
		watches->watchhi[2] = (read_c0_watchhi2() & 0x0fff);
	case 2:
		watches->watchhi[1] = (read_c0_watchhi1() & 0x0fff);
	case 1:
		watches->watchhi[0] = (read_c0_watchhi0() & 0x0fff);
	}
	if (current_cpu_data.watch_reg_use_cnt == 1 &&
	    (watches->watchhi[0] & 7) == 0) {
		watches->watchhi[0] |= (watches->watchlo[0] & 7);
	}
 }
Пример #4
0
__cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
{
	unsigned int t;

	if ((c->options & MIPS_CPU_WATCH) == 0)
		return;
	/*
	 * Check which of the I,R and W bits are supported, then
	 * disable the register.
	 */
	write_c0_watchlo0(7);
	t = read_c0_watchlo0();
	write_c0_watchlo0(0);
	c->watch_reg_masks[0] = t & 7;

	/* Write the mask bits and read them back to determine which
	 * can be used. */
	c->watch_reg_count = 1;
	c->watch_reg_use_cnt = 1;
	t = read_c0_watchhi0();
	write_c0_watchhi0(t | 0xff8);
	t = read_c0_watchhi0();
	c->watch_reg_masks[0] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo1(7);
	t = read_c0_watchlo1();
	write_c0_watchlo1(0);
	c->watch_reg_masks[1] = t & 7;

	c->watch_reg_count = 2;
	c->watch_reg_use_cnt = 2;
	t = read_c0_watchhi1();
	write_c0_watchhi1(t | 0xff8);
	t = read_c0_watchhi1();
	c->watch_reg_masks[1] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo2(7);
	t = read_c0_watchlo2();
	write_c0_watchlo2(0);
	c->watch_reg_masks[2] = t & 7;

	c->watch_reg_count = 3;
	c->watch_reg_use_cnt = 3;
	t = read_c0_watchhi2();
	write_c0_watchhi2(t | 0xff8);
	t = read_c0_watchhi2();
	c->watch_reg_masks[2] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo3(7);
	t = read_c0_watchlo3();
	write_c0_watchlo3(0);
	c->watch_reg_masks[3] = t & 7;

	c->watch_reg_count = 4;
	c->watch_reg_use_cnt = 4;
	t = read_c0_watchhi3();
	write_c0_watchhi3(t | 0xff8);
	t = read_c0_watchhi3();
	c->watch_reg_masks[3] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	/* We use at most 4, but probe and report up to 8. */
	c->watch_reg_count = 5;
	t = read_c0_watchhi4();
	if ((t & 0x80000000) == 0)
		return;

	c->watch_reg_count = 6;
	t = read_c0_watchhi5();
	if ((t & 0x80000000) == 0)
		return;

	c->watch_reg_count = 7;
	t = read_c0_watchhi6();
	if ((t & 0x80000000) == 0)
		return;

	c->watch_reg_count = 8;
}
Пример #5
0
void __cpuinit rlx_probe_watch_registers(struct cpuinfo_mips *c)
{
	unsigned int t;

	if ((c->options & MIPS_CPU_WATCH) == 0)
		return;
	/*
	 * Check which of the I,R and W bits are supported, then
	 * disable the register.
	 */
	write_c0_watchlo0(7);
	t = read_c0_watchlo0();
	write_c0_watchlo0(0);
	c->watch_reg_masks[0] = t & 7;

	/* Write the mask bits and read them back to determine which
	 * can be used. */
	c->watch_reg_count = 1;
	c->watch_reg_use_cnt = 1;
	t = read_c0_watchhi0();
	write_c0_watchhi0(t | 0xff8);
	t = read_c0_watchhi0();
	c->watch_reg_masks[0] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo1(7);
	t = read_c0_watchlo1();
	write_c0_watchlo1(0);
	c->watch_reg_masks[1] = t & 7;

	c->watch_reg_count = 2;
	c->watch_reg_use_cnt = 2;
	t = read_c0_watchhi1();
	write_c0_watchhi1(t | 0xff8);
	t = read_c0_watchhi1();
	c->watch_reg_masks[1] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo2(7);
	t = read_c0_watchlo2();
	write_c0_watchlo2(0);
	c->watch_reg_masks[2] = t & 7;

	c->watch_reg_count = 3;
	c->watch_reg_use_cnt = 3;
	t = read_c0_watchhi2();
	write_c0_watchhi2(t | 0xff8);
	t = read_c0_watchhi2();
	c->watch_reg_masks[2] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo3(7);
	t = read_c0_watchlo3();
	write_c0_watchlo3(0);
	c->watch_reg_masks[3] = t & 7;

	c->watch_reg_count = 4;
	c->watch_reg_use_cnt = 4;
	t = read_c0_watchhi3();
	write_c0_watchhi3(t | 0xff8);
	t = read_c0_watchhi3();
	c->watch_reg_masks[3] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	/* taroko processor can be configured for more than 4
	 * registers */

	write_c0_watchlo4(7);
        t = read_c0_watchlo4();
        write_c0_watchlo4(0);

	c->watch_reg_count = 5;
        c->watch_reg_use_cnt = 5;
        t = read_c0_watchhi4();
        write_c0_watchhi4(t | 0xff8);
	t = read_c0_watchhi4();
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo5(7);
        t = read_c0_watchlo5();
        write_c0_watchlo5(0);

	c->watch_reg_count = 6;
        c->watch_reg_use_cnt = 6;
        t = read_c0_watchhi5();
        write_c0_watchhi5(t | 0xff8);
	t = read_c0_watchhi5();
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo6(7);
        t = read_c0_watchlo6();
        write_c0_watchlo6(0);

	c->watch_reg_count = 7;
        c->watch_reg_use_cnt = 7;
        t = read_c0_watchhi6();
        write_c0_watchhi6(t | 0xff8);
	t = read_c0_watchhi6();
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo7(7);
        t = read_c0_watchlo7();
        write_c0_watchlo7(0);

	c->watch_reg_count = 8;
        c->watch_reg_use_cnt = 8;
        t = read_c0_watchhi7();
        write_c0_watchhi7(t | 0xff8);
        t = read_c0_watchhi7();
        if ((t & 0x80000000) == 0)
                return;
}
Пример #6
0
__cpuinit void mips_probe_watch_registers(struct cpuinfo_mips *c)
{
	unsigned int t;

	if ((c->options & MIPS_CPU_WATCH) == 0)
		return;
	write_c0_watchlo0(7);
	t = read_c0_watchlo0();
	write_c0_watchlo0(0);
	c->watch_reg_masks[0] = t & 7;

	c->watch_reg_count = 1;
	c->watch_reg_use_cnt = 1;
	t = read_c0_watchhi0();
	write_c0_watchhi0(t | 0xff8);
	t = read_c0_watchhi0();
	c->watch_reg_masks[0] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo1(7);
	t = read_c0_watchlo1();
	write_c0_watchlo1(0);
	c->watch_reg_masks[1] = t & 7;

	c->watch_reg_count = 2;
	c->watch_reg_use_cnt = 2;
	t = read_c0_watchhi1();
	write_c0_watchhi1(t | 0xff8);
	t = read_c0_watchhi1();
	c->watch_reg_masks[1] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo2(7);
	t = read_c0_watchlo2();
	write_c0_watchlo2(0);
	c->watch_reg_masks[2] = t & 7;

	c->watch_reg_count = 3;
	c->watch_reg_use_cnt = 3;
	t = read_c0_watchhi2();
	write_c0_watchhi2(t | 0xff8);
	t = read_c0_watchhi2();
	c->watch_reg_masks[2] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	write_c0_watchlo3(7);
	t = read_c0_watchlo3();
	write_c0_watchlo3(0);
	c->watch_reg_masks[3] = t & 7;

	c->watch_reg_count = 4;
	c->watch_reg_use_cnt = 4;
	t = read_c0_watchhi3();
	write_c0_watchhi3(t | 0xff8);
	t = read_c0_watchhi3();
	c->watch_reg_masks[3] |= (t & 0xff8);
	if ((t & 0x80000000) == 0)
		return;

	
	c->watch_reg_count = 5;
	t = read_c0_watchhi4();
	if ((t & 0x80000000) == 0)
		return;

	c->watch_reg_count = 6;
	t = read_c0_watchhi5();
	if ((t & 0x80000000) == 0)
		return;

	c->watch_reg_count = 7;
	t = read_c0_watchhi6();
	if ((t & 0x80000000) == 0)
		return;

	c->watch_reg_count = 8;
}