int amend_main(int argc, char** argv)
{
if (argc != 2)
{
printf("Usage: amend <script>\n");
return 0;
}
RecoveryCommandContext ctx = { NULL };
if (register_update_commands(&ctx)) {
LOGE("Can't install update commands\n");
}
return run_script(argv[1]);
}
int
main(int argc, char **argv)
{
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
fprintf(stderr, "Starting recovery on %s", ctime(&start));
ui_init();
ui_print("Android system recovery utility\n");
get_args(&argc, &argv);
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w': wipe_data = wipe_cache = 1; break;
case 'c': wipe_cache = 1; break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
fprintf(stderr, "Command:");
for (arg = 0; arg < argc; arg++) {
fprintf(stderr, " \"%s\"", argv[arg]);
}
fprintf(stderr, "\n\n");
property_list(print_property, NULL);
fprintf(stderr, "\n");
#if TEST_AMEND
test_amend();
#endif
RecoveryCommandContext ctx = { NULL };
if (register_update_commands(&ctx)) {
LOGE("Can't install update commands\n");
}
int status = INSTALL_SUCCESS;
if (update_package != NULL) {
status = install_package(update_package);
if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n");
} else if (wipe_data || wipe_cache) {
if (wipe_data && erase_root("DATA:")) status = INSTALL_ERROR;
if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n");
} else {
status = INSTALL_ERROR; // No command specified
}
if (status != INSTALL_SUCCESS) ui_set_background(BACKGROUND_ICON_ERROR);
if (status != INSTALL_SUCCESS || ui_text_visible()) prompt_and_wait();
// If there is a radio image pending, reboot now to install it.
maybe_install_firmware_update(send_intent);
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
ui_print("Rebooting...\n");
sync();
reboot(RB_AUTOBOOT);
return EXIT_SUCCESS;
}
int
main(int argc, char **argv) {
if (strstr(argv[0], "recovery") == NULL)
{
if (strstr(argv[0], "flash_image") != NULL)
return flash_image_main(argc, argv);
if (strstr(argv[0], "dump_image") != NULL)
return dump_image_main(argc, argv);
if (strstr(argv[0], "erase_image") != NULL)
return erase_image_main(argc, argv);
if (strstr(argv[0], "mkyaffs2image") != NULL)
return mkyaffs2image_main(argc, argv);
if (strstr(argv[0], "unyaffs") != NULL)
return unyaffs_main(argc, argv);
if (strstr(argv[0], "amend"))
return amend_main(argc, argv);
if (strstr(argv[0], "nandroid"))
return nandroid_main(argc, argv);
if (strstr(argv[0], "reboot"))
return reboot_main(argc, argv);
if (strstr(argv[0], "setprop"))
return setprop_main(argc, argv);
return busybox_driver(argc, argv);
}
__system("/sbin/postrecoveryboot.sh");
create_fstab();
int is_user_initiated_recovery = 0;
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
fprintf(stderr, "Starting recovery on %s", ctime(&start));
ui_init();
ui_print(EXPAND(RECOVERY_VERSION)"\n");
#ifdef BOARD_GOAPK_DEFY
ui_print(EXPAND(RECOVERY_VERSION_GOAPK)"\n");
ui_print(EXPAND(RECOVERY_VERSION_QUN)"\n");
#endif
get_args(&argc, &argv);
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w': wipe_data = wipe_cache = 1; break;
case 'c': wipe_cache = 1; break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
device_recovery_start();
fprintf(stderr, "Command:");
for (arg = 0; arg < argc; arg++) {
fprintf(stderr, " \"%s\"", argv[arg]);
}
fprintf(stderr, "\n\n");
property_list(print_property, NULL);
fprintf(stderr, "\n");
int status = INSTALL_SUCCESS;
RecoveryCommandContext ctx = { NULL };
if (register_update_commands(&ctx)) {
LOGE("Can't install update commands\n");
}
if (update_package != NULL) {
if (wipe_data && erase_root("DATA:")) status = INSTALL_ERROR;
status = install_package(update_package);
if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n");
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
if (erase_root("DATA:")) status = INSTALL_ERROR;
if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n");
} else if (wipe_cache) {
if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Cache wipe failed.\n");
} else {
LOGI("Checking for extendedcommand...\n");
status = INSTALL_ERROR; // No command specified
// we are starting up in user initiated recovery here
// let's set up some default options
signature_check_enabled = 0;
script_assert_enabled = 0;
is_user_initiated_recovery = 1;
ui_set_show_text(1);
if (extendedcommand_file_exists()) {
LOGI("Running extendedcommand...\n");
int ret;
if (0 == (ret = run_and_remove_extendedcommand())) {
status = INSTALL_SUCCESS;
ui_set_show_text(0);
}
else {
handle_failure(ret);
}
} else {
LOGI("Skipping execution of extendedcommand, file not found...\n");
}
}
if (status != INSTALL_SUCCESS && !is_user_initiated_recovery) ui_set_background(BACKGROUND_ICON_ERROR);
if (status != INSTALL_SUCCESS || ui_text_visible()) prompt_and_wait();
#ifndef BOARD_HAS_NO_MISC_PARTITION
// If there is a radio image pending, reboot now to install it.
maybe_install_firmware_update(send_intent);
#endif
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
ui_print("Rebooting...\n");
sync();
reboot(RB_AUTOBOOT);
return EXIT_SUCCESS;
}
int
main(int argc, char **argv) {
if (strstr(argv[0], "recovery") == NULL)
{
if (strstr(argv[0], "flash_image") != NULL)
return flash_image_main(argc, argv);
if (strstr(argv[0], "dump_image") != NULL)
return dump_image_main(argc, argv);
if (strstr(argv[0], "erase_image") != NULL)
return erase_image_main(argc, argv);
if (strstr(argv[0], "mkyaffs2image") != NULL)
return mkyaffs2image_main(argc, argv);
if (strstr(argv[0], "unyaffs") != NULL)
return unyaffs_main(argc, argv);
if (strstr(argv[0], "nandroid"))
return nandroid_main(argc, argv);
if (strstr(argv[0], "reboot"))
return reboot_main(argc, argv);
if (strstr(argv[0], "setprop"))
return setprop_main(argc, argv);
if (strstr(argv[0], "getprop"))
return getprop_main(argc, argv);
return busybox_driver(argc, argv);
}
int is_user_initiated_recovery = 0;
time_t start = time(NULL);
// If these fail, there's not really anywhere to complain...
freopen(TEMPORARY_LOG_FILE, "a", stdout); setbuf(stdout, NULL);
freopen(TEMPORARY_LOG_FILE, "a", stderr); setbuf(stderr, NULL);
fprintf(stderr, "Starting recovery on %s", ctime(&start));
ui_init();
ui_print(EXPAND(RECOVERY_VERSION)"\n");
//get_args(&argc, &argv);
int previous_runs = 0;
const char *send_intent = NULL;
const char *update_package = NULL;
int wipe_data = 0, wipe_cache = 0;
int arg;
while ((arg = getopt_long(argc, argv, "", OPTIONS, NULL)) != -1) {
switch (arg) {
case 'p': previous_runs = atoi(optarg); break;
case 's': send_intent = optarg; break;
case 'u': update_package = optarg; break;
case 'w': wipe_data = wipe_cache = 1; break;
case 'c': wipe_cache = 1; break;
case '?':
LOGE("Invalid command argument\n");
continue;
}
}
//device_recovery_start();
fprintf(stderr, "Command:");
for (arg = 0; arg < argc; arg++) {
fprintf(stderr, " \"%s\"", argv[arg]);
}
fprintf(stderr, "\n\n");
property_list(print_property, NULL);
fprintf(stderr, "\n");
int status = INSTALL_SUCCESS;
//Register amend commands
RecoveryCommandContext ctx = { NULL };
if (register_update_commands(&ctx)) {
LOGE("Can't install update commands\n");
}
if (update_package != NULL) {
status = install_package(update_package);
if (status != INSTALL_SUCCESS) ui_print("Installation aborted.\n");
} else if (wipe_data) {
if (device_wipe_data()) status = INSTALL_ERROR;
if (erase_root("DATA:")) status = INSTALL_ERROR;
if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Data wipe failed.\n");
} else if (wipe_cache) {
if (wipe_cache && erase_root("CACHE:")) status = INSTALL_ERROR;
if (status != INSTALL_SUCCESS) ui_print("Cache wipe failed.\n");
} else {
status = INSTALL_ERROR; // No command specified
}
if (status != INSTALL_SUCCESS || ui_text_visible()) prompt_and_wait();
// Otherwise, get ready to boot the main system...
finish_recovery(send_intent);
ui_print("Rebooting...\n");
sync();
reboot(RB_AUTOBOOT);
return EXIT_SUCCESS;
}
