void
fdfinish(struct fd_softc *fd, struct buf *bp)
{
struct fdc_softc *fdc = device_private(device_parent(fd->sc_dev));
/*
* Move this drive to the end of the queue to give others a `fair'
* chance. We only force a switch if N operations are completed while
* another drive is waiting to be serviced, since there is a long motor
* startup delay whenever we switch.
*/
(void)BUFQ_GET(fd->sc_q);
if (TAILQ_NEXT(fd, sc_drivechain) && ++fd->sc_ops >= 8) {
fd->sc_ops = 0;
TAILQ_REMOVE(&fdc->sc_drives, fd, sc_drivechain);
if (BUFQ_PEEK(fd->sc_q) != NULL)
TAILQ_INSERT_TAIL(&fdc->sc_drives, fd, sc_drivechain);
else
fd->sc_active = 0;
}
bp->b_resid = fd->sc_bcount;
fd->sc_skip = 0;
#if NRND > 0
rnd_add_uint32(&fd->rnd_source, bp->b_blkno);
#endif
biodone(bp);
/* turn off motor 5s from now */
callout_reset(&fd->sc_motoroff_ch, 5 * hz, fd_motor_off, fd);
fdc->sc_state = DEVIDLE;
}
int
pckbcintr(void *vsc)
{
struct pckbc_softc *sc = (struct pckbc_softc *)vsc;
struct pckbc_internal *t = sc->id;
u_char stat;
pckbc_slot_t slot;
struct pckbc_slotdata *q;
int served = 0, data;
for(;;) {
stat = bus_space_read_1(t->t_iot, t->t_ioh_c, 0);
if (!(stat & KBS_DIB))
break;
slot = (t->t_haveaux && (stat & 0x20)) ?
PCKBC_AUX_SLOT : PCKBC_KBD_SLOT;
q = t->t_slotdata[slot];
if (q != NULL && q->polling)
return 0;
served = 1;
KBD_DELAY;
data = bus_space_read_1(t->t_iot, t->t_ioh_d, 0);
rnd_add_uint32(&q->rnd_source, (stat<<8)|data);
pckbportintr(t->t_pt, slot, data);
}
return (served);
}
void
lddone(struct ld_softc *sc, struct buf *bp)
{
if ((bp->b_flags & B_ERROR) != 0) {
diskerr(bp, "ld", "error", LOG_PRINTF, 0, sc->sc_dk.dk_label);
printf("\n");
}
disk_unbusy(&sc->sc_dk, bp->b_bcount - bp->b_resid);
#if NRND > 0
rnd_add_uint32(&sc->sc_rnd_source, bp->b_rawblkno);
#endif
biodone(bp);
if (--sc->sc_queuecnt <= sc->sc_maxqueuecnt) {
if ((sc->sc_flags & LDF_DRAIN) != 0)
wakeup(&sc->sc_queuecnt);
while ((bp = BUFQ_FIRST(&sc->sc_bufq)) != NULL) {
BUFQ_REMOVE(&sc->sc_bufq, bp);
if (!ldstart(sc, bp))
break;
}
}
}
int
pckbcintr_hard(void *vsc)
{
struct pckbc_softc *sc = (struct pckbc_softc *)vsc;
struct pckbc_internal *t = sc->id;
u_char stat;
pckbc_slot_t slot;
struct pckbc_slotdata *q;
int served = 0, data, next, s;
for(;;) {
stat = bus_space_read_1(t->t_iot, t->t_ioh_c, 0);
if (!(stat & KBS_DIB))
break;
served = 1;
slot = (t->t_haveaux && (stat & 0x20)) ?
PCKBC_AUX_SLOT : PCKBC_KBD_SLOT;
q = t->t_slotdata[slot];
if (!q) {
/* XXX do something for live insertion? */
printf("pckbc: no dev for slot %d\n", slot);
KBD_DELAY;
(void) bus_space_read_1(t->t_iot, t->t_ioh_d, 0);
continue;
}
KBD_DELAY;
data = bus_space_read_1(t->t_iot, t->t_ioh_d, 0);
rnd_add_uint32(&q->rnd_source, (stat<<8)|data);
if (q->polling) {
q->poll_data = data;
q->poll_stat = stat;
break; /* pckbc_poll_data() will get it */
}
#if 0 /* XXXBJH */
if (CMD_IN_QUEUE(q) && pckbc_cmdresponse(t, slot, data))
continue;
#endif
s = splhigh();
next = (t->rbuf_write+1) % PCKBC_RBUF_SIZE;
if (next == t->rbuf_read) {
splx(s);
break;
}
t->rbuf[t->rbuf_write].data = data;
t->rbuf[t->rbuf_write].slot = slot;
t->rbuf_write = next;
splx(s);
}
return (served);
}
int
rtk_intr(void *arg)
{
struct rtk_softc *sc;
struct ifnet *ifp;
uint16_t status;
int handled;
sc = arg;
ifp = &sc->ethercom.ec_if;
if (!device_has_power(sc->sc_dev))
return 0;
/* Disable interrupts. */
CSR_WRITE_2(sc, RTK_IMR, 0x0000);
handled = 0;
for (;;) {
status = CSR_READ_2(sc, RTK_ISR);
if (status == 0xffff)
break; /* Card is gone... */
if (status)
CSR_WRITE_2(sc, RTK_ISR, status);
if ((status & RTK_INTRS) == 0)
break;
handled = 1;
if (status & RTK_ISR_RX_OK)
rtk_rxeof(sc);
if (status & RTK_ISR_RX_ERR)
rtk_rxeof(sc);
if (status & (RTK_ISR_TX_OK|RTK_ISR_TX_ERR))
rtk_txeof(sc);
if (status & RTK_ISR_SYSTEM_ERR) {
rtk_reset(sc);
rtk_init(ifp);
}
}
/* Re-enable interrupts. */
CSR_WRITE_2(sc, RTK_IMR, RTK_INTRS);
if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
rtk_start(ifp);
rnd_add_uint32(&sc->rnd_source, status);
return handled;
}
int
smap_intr(void *arg)
{
struct smap_softc *sc = arg;
struct ifnet *ifp;
u_int16_t cause, disable, r;
cause = _reg_read_2(SPD_INTR_STATUS_REG16) &
_reg_read_2(SPD_INTR_ENABLE_REG16);
disable = cause & (SPD_INTR_RXDNV | SPD_INTR_TXDNV);
if (disable) {
r = _reg_read_2(SPD_INTR_ENABLE_REG16);
r &= ~disable;
_reg_write_2(SPD_INTR_ENABLE_REG16, r);
printf("%s: invalid descriptor. (%c%c)\n", DEVNAME,
disable & SPD_INTR_RXDNV ? 'R' : '_',
disable & SPD_INTR_TXDNV ? 'T' : '_');
if (disable & SPD_INTR_RXDNV)
smap_rxeof(arg);
_reg_write_2(SPD_INTR_CLEAR_REG16, disable);
}
if (cause & SPD_INTR_TXEND) {
_reg_write_2(SPD_INTR_CLEAR_REG16, SPD_INTR_TXEND);
if (_reg_read_1(SMAP_RXFIFO_FRAME_REG8) > 0)
cause |= SPD_INTR_RXEND;
smap_txeof(arg);
}
if (cause & SPD_INTR_RXEND) {
_reg_write_2(SPD_INTR_CLEAR_REG16, SPD_INTR_RXEND);
smap_rxeof(arg);
if (sc->tx_desc_cnt > 0 &&
sc->tx_desc_cnt > _reg_read_1(SMAP_TXFIFO_FRAME_REG8))
smap_txeof(arg);
}
if (cause & SPD_INTR_EMAC3)
emac3_intr(arg);
/* if transmission is pending, start here */
ifp = &sc->ethercom.ec_if;
if (IFQ_IS_EMPTY(&ifp->if_snd) == 0)
smap_start(ifp);
#if NRND > 0
rnd_add_uint32(&sc->rnd_source, cause | sc->tx_fifo_ptr << 16);
#endif
return (1);
}
static void
xbdresume(void)
{
struct xbdreq *pxr, *xr;
struct xbd_softc *xs;
struct buf *bp;
while ((pxr = SIMPLEQ_FIRST(&xbdr_suspended)) != NULL) {
DPRINTF(XBDB_IO, ("xbdstart: resuming xbdreq %p for bp %p\n",
pxr, pxr->xr_bp));
bp = pxr->xr_bp;
xs = getxbd_softc(bp->b_dev);
if (xs == NULL || xs->sc_shutdown) {
bp->b_flags |= B_ERROR;
bp->b_error = EIO;
}
if (bp->b_flags & B_ERROR) {
pxr->xr_bdone -= pxr->xr_bqueue;
pxr->xr_bqueue = 0;
if (pxr->xr_bdone == 0) {
bp->b_resid = bp->b_bcount;
if (pxr->xr_aligned)
unmap_align(pxr);
PUT_XBDREQ(pxr);
if (xs)
{
disk_unbusy(&xs->sc_dksc.sc_dkdev,
(bp->b_bcount - bp->b_resid),
(bp->b_flags & B_READ));
#if NRND > 0
rnd_add_uint32(&xs->rnd_source,
bp->b_blkno);
#endif
}
biodone(bp);
}
continue;
}
while (__predict_true(pxr->xr_bqueue > 0)) {
GET_XBDREQ(xr);
if (__predict_false(xr == NULL))
goto out;
xr->xr_parent = pxr;
fill_ring(xr);
}
DPRINTF(XBDB_IO, ("xbdstart: resumed xbdreq %p for bp %p\n",
pxr, bp));
SIMPLEQ_REMOVE_HEAD(&xbdr_suspended, xr_suspended);
}
out:
return;
}
static void
arckbd_keyupdown(device_t self, int byte1, int byte2)
{
struct arckbd_softc *sc = device_private(self);
u_int type;
int value;
rnd_add_uint32(&sc->sc_rnd_source, byte1);
if ((byte1 & 0x0f) == 7) {
/* Mouse button event */
/*
* This is all very silly, as the wsmouse driver then
* differentiates the button state to see if there's
* an event worth passing to the user.
*
* Oh well, at least NetBSD and Acorn number their
* mouse buttons the same way.
*/
if (ARCKBD_IS_KDDA(byte1))
sc->sc_mouse_buttons |= (1 << (byte2 & 0x0f));
else
sc->sc_mouse_buttons &= ~(1 << (byte2 & 0x0f));
#if NWSMOUSE > 0
if (sc->sc_wsmousedev != NULL)
wsmouse_input(sc->sc_wsmousedev,
sc->sc_mouse_buttons,
0, 0, 0, 0,
WSMOUSE_INPUT_DELTA);
#endif
} else {
type = ARCKBD_IS_KDDA(byte1) ?
WSCONS_EVENT_KEY_DOWN : WSCONS_EVENT_KEY_UP;
value = ((byte1 & 0x0f) << 4) | (byte2 & 0x0f);
if (sc->sc_flags & AKF_POLLING) {
sc->sc_poll_type = type;
sc->sc_poll_value = value;
}
#if NWSKBD > 0
else if (sc->sc_wskbddev != NULL)
wskbd_input(sc->sc_wskbddev, type, value);
#endif
}
}
static void
ucom_write_status(struct ucom_softc *sc, struct ucom_buffer *ub,
usbd_status err)
{
struct tty *tp = sc->sc_tty;
uint32_t cc = ub->ub_len;
switch (err) {
case USBD_IN_PROGRESS:
ub->ub_index = ub->ub_len;
break;
case USBD_STALLED:
ub->ub_index = 0;
softint_schedule(sc->sc_si);
break;
case USBD_NORMAL_COMPLETION:
usbd_get_xfer_status(ub->ub_xfer, NULL, NULL, &cc, NULL);
#if defined(__NetBSD__) && NRND > 0
rnd_add_uint32(&sc->sc_rndsource, cc);
#endif
/*FALLTHROUGH*/
default:
SIMPLEQ_REMOVE_HEAD(&sc->sc_obuff_full, ub_link);
SIMPLEQ_INSERT_TAIL(&sc->sc_obuff_free, ub, ub_link);
cc -= sc->sc_opkthdrlen;
CLR(tp->t_state, TS_BUSY);
if (ISSET(tp->t_state, TS_FLUSH))
CLR(tp->t_state, TS_FLUSH);
else
ndflush(&tp->t_outq, cc);
if (err != USBD_CANCELLED && err != USBD_IOERROR &&
!sc->sc_dying) {
if ((ub = SIMPLEQ_FIRST(&sc->sc_obuff_full)) != NULL)
ucom_submit_write(sc, ub);
(*tp->t_linesw->l_start)(tp);
}
break;
}
}
static int
sq_intr(void * arg)
{
struct sq_softc *sc = arg;
struct ifnet *ifp = &sc->sc_ethercom.ec_if;
int handled = 0;
u_int32_t stat;
stat = bus_space_read_4(sc->sc_hpct, sc->sc_hpch, HPC_ENETR_RESET);
if ((stat & 2) == 0) {
printf("%s: Unexpected interrupt!\n", sc->sc_dev.dv_xname);
return 0;
}
bus_space_write_4(sc->sc_hpct, sc->sc_hpch, HPC_ENETR_RESET, 2);
/*
* If the interface isn't running, the interrupt couldn't
* possibly have come from us.
*/
if ((ifp->if_flags & IFF_RUNNING) == 0)
return 0;
sc->sq_intrcnt.ev_count++;
/* Always check for received packets */
if (sq_rxintr(sc) != 0)
handled++;
/* Only handle transmit interrupts if we actually sent something */
if (sc->sc_nfreetx < SQ_NTXDESC) {
sq_txintr(sc);
handled++;
}
#if NRND > 0
if (handled)
rnd_add_uint32(&sc->rnd_source, stat);
#endif
return (handled);
}
static void
arckbd_mousemoved(device_t self, int byte1, int byte2)
{
struct arckbd_softc *sc = device_private(self);
rnd_add_uint32(&sc->sc_rnd_source, byte1);
#if NWSMOUSE > 0
if (sc->sc_wsmousedev != NULL) {
int dx, dy;
/* deltas are 7-bit signed */
dx = byte1 < 0x40 ? byte1 : byte1 - 0x80;
dy = byte2 < 0x40 ? byte2 : byte2 - 0x80;
wsmouse_input(sc->sc_wsmousedev,
sc->sc_mouse_buttons,
dx, dy, 0, 0,
WSMOUSE_INPUT_DELTA);
}
#endif
}
static int
sackbc_rxint(void *cookie)
{
struct sackbc_softc *sc = cookie;
int stat, code = -1;
stat = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_STAT);
DPRINTF(("sackbc_rxint stat=%x\n", stat));
if (stat & KBDSTAT_RXF) {
code = bus_space_read_4(sc->iot, sc->ioh, SACCKBD_DATA);
rnd_add_uint32(&sc->rnd_source, (stat<<8)|code);
if (sc->polling) {
sc->poll_data = code;
sc->poll_stat = stat;
} else
pckbportintr(sc->pt, sc->slot, code);
return 1;
}
return 0;
}
static void
dk_done1(struct dk_softc *dksc, struct buf *bp, bool lock)
{
struct disk *dk = &dksc->sc_dkdev;
if (bp->b_error != 0) {
struct cfdriver *cd = device_cfdriver(dksc->sc_dev);
diskerr(bp, cd->cd_name, "error", LOG_PRINTF, 0,
dk->dk_label);
printf("\n");
}
if (lock)
mutex_enter(&dksc->sc_iolock);
disk_unbusy(dk, bp->b_bcount - bp->b_resid, (bp->b_flags & B_READ));
if (lock)
mutex_exit(&dksc->sc_iolock);
rnd_add_uint32(&dksc->sc_rnd_source, bp->b_rawblkno);
biodone(bp);
}
/*
* Controller interrupt.
*/
int
elintr(void *arg)
{
struct el_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_int8_t rxstat;
int len;
DPRINTF(("elintr: "));
/* Check board status. */
if ((bus_space_read_1(iot, ioh, EL_AS) & EL_AS_RXBUSY) != 0) {
(void)bus_space_read_1(iot, ioh, EL_RXC);
bus_space_write_1(iot, ioh, EL_AC, EL_AC_IRQE | EL_AC_RX);
return 0;
}
for (;;) {
rxstat = bus_space_read_1(iot, ioh, EL_RXS);
if (rxstat & EL_RXS_STALE)
break;
/* If there's an overflow, reinit the board. */
if ((rxstat & EL_RXS_NOFLOW) == 0) {
DPRINTF(("overflow.\n"));
el_hardreset(sc);
/* Put board back into receive mode. */
if (sc->sc_ethercom.ec_if.if_flags & IFF_PROMISC)
bus_space_write_1(iot, ioh, EL_RXC,
EL_RXC_AGF | EL_RXC_DSHORT | EL_RXC_DDRIB |
EL_RXC_DOFLOW | EL_RXC_PROMISC);
else
bus_space_write_1(iot, ioh, EL_RXC,
EL_RXC_AGF | EL_RXC_DSHORT | EL_RXC_DDRIB |
EL_RXC_DOFLOW | EL_RXC_ABROAD);
(void)bus_space_read_1(iot, ioh, EL_AS);
bus_space_write_1(iot, ioh, EL_RBC, 0);
break;
}
/* Incoming packet. */
len = bus_space_read_1(iot, ioh, EL_RBL);
len |= bus_space_read_1(iot, ioh, EL_RBH) << 8;
DPRINTF(("receive len=%d rxstat=%x ", len, rxstat));
bus_space_write_1(iot, ioh, EL_AC, EL_AC_HOST);
/* Pass data up to upper levels. */
elread(sc, len);
/* Is there another packet? */
if ((bus_space_read_1(iot, ioh, EL_AS) & EL_AS_RXBUSY) != 0)
break;
rnd_add_uint32(&sc->rnd_source, rxstat);
DPRINTF(("<rescan> "));
}
(void)bus_space_read_1(iot, ioh, EL_RXC);
bus_space_write_1(iot, ioh, EL_AC, EL_AC_IRQE | EL_AC_RX);
return 1;
}
void
uhidev_intr(struct usbd_xfer *xfer, void *addr, usbd_status status)
{
struct uhidev_softc *sc = addr;
device_t cdev;
struct uhidev *scd;
u_char *p;
u_int rep;
uint32_t cc;
usbd_get_xfer_status(xfer, NULL, NULL, &cc, NULL);
#ifdef UHIDEV_DEBUG
if (uhidevdebug > 5) {
uint32_t i;
DPRINTF(("uhidev_intr: status=%d cc=%d\n", status, cc));
DPRINTF(("uhidev_intr: data ="));
for (i = 0; i < cc; i++)
DPRINTF((" %02x", sc->sc_ibuf[i]));
DPRINTF(("\n"));
}
#endif
if (status == USBD_CANCELLED)
return;
if (status != USBD_NORMAL_COMPLETION) {
DPRINTF(("%s: interrupt status=%d\n", device_xname(sc->sc_dev),
status));
usbd_clear_endpoint_stall_async(sc->sc_ipipe);
return;
}
p = sc->sc_ibuf;
if (sc->sc_nrepid != 1)
rep = *p++, cc--;
else
rep = 0;
if (rep >= sc->sc_nrepid) {
printf("uhidev_intr: bad repid %d\n", rep);
return;
}
cdev = sc->sc_subdevs[rep];
if (!cdev)
return;
scd = device_private(cdev);
DPRINTFN(5,("uhidev_intr: rep=%d, scd=%p state=0x%x\n",
rep, scd, scd ? scd->sc_state : 0));
if (!(scd->sc_state & UHIDEV_OPEN))
return;
#ifdef UHIDEV_DEBUG
if (scd->sc_in_rep_size != cc) {
DPRINTF(("%s: expected %d bytes, got %d\n",
device_xname(sc->sc_dev), scd->sc_in_rep_size, cc));
}
#endif
if (cc == 0) {
DPRINTF(("%s: 0-length input ignored\n",
device_xname(sc->sc_dev)));
return;
}
rnd_add_uint32(&scd->rnd_source, (uintptr_t)(sc->sc_ibuf));
scd->sc_intr(scd, p, cc);
}
static int
xbd_response_handler(void *arg)
{
struct buf *bp;
struct xbd_softc *xs;
blk_ring_resp_entry_t *ring_resp;
struct xbdreq *pxr, *xr;
int i;
for (i = resp_cons; i != blk_ring->resp_prod; i = BLK_RING_INC(i)) {
ring_resp = &blk_ring->ring[MASK_BLK_IDX(i)].resp;
xr = (struct xbdreq *)ring_resp->id;
pxr = xr->xr_parent;
DPRINTF(XBDB_IO, ("xbd_response_handler(%d): pxr %p xr %p "
"bdone %04lx breq %04lx\n", i, pxr, xr, pxr->xr_bdone,
xr->xr_breq));
pxr->xr_bdone -= xr->xr_breq;
DIAGCONDPANIC(pxr->xr_bdone < 0,
("xbd_response_handler: pxr->xr_bdone < 0"));
if (__predict_false(ring_resp->status)) {
pxr->xr_bp->b_flags |= B_ERROR;
pxr->xr_bp->b_error = EIO;
}
if (xr != pxr) {
PUT_XBDREQ(xr);
if (!SIMPLEQ_EMPTY(&xbdr_suspended))
xbdresume();
}
if (pxr->xr_bdone == 0) {
bp = pxr->xr_bp;
xs = getxbd_softc(bp->b_dev);
if (xs == NULL) { /* don't fail bp if we're shutdown */
bp->b_flags |= B_ERROR;
bp->b_error = EIO;
}
DPRINTF(XBDB_IO, ("xbd_response_handler(%d): "
"completed bp %p\n", i, bp));
if (bp->b_flags & B_ERROR)
bp->b_resid = bp->b_bcount;
else
bp->b_resid = 0;
if (pxr->xr_aligned)
unmap_align(pxr);
PUT_XBDREQ(pxr);
if (xs) {
disk_unbusy(&xs->sc_dksc.sc_dkdev,
(bp->b_bcount - bp->b_resid),
(bp->b_flags & B_READ));
#if NRND > 0
rnd_add_uint32(&xs->rnd_source,
bp->b_blkno);
#endif
}
biodone(bp);
if (!SIMPLEQ_EMPTY(&xbdr_suspended))
xbdresume();
/* XXX possible lockup if this was the only
* active device and requests were held back in
* the queue.
*/
if (xs)
dk_iodone(xs->sc_di, &xs->sc_dksc);
}
}
resp_cons = i;
/* check if xbdresume queued any requests */
if (last_req_prod != req_prod)
signal_requests_to_xen();
return 0;
}
int
bce_intr(void *xsc)
{
struct bce_softc *sc;
struct ifnet *ifp;
uint32_t intstatus;
int wantinit;
int handled = 0;
sc = xsc;
ifp = &sc->ethercom.ec_if;
for (wantinit = 0; wantinit == 0;) {
intstatus = bus_space_read_4(sc->bce_btag, sc->bce_bhandle,
BCE_INT_STS);
/* ignore if not ours, or unsolicited interrupts */
intstatus &= sc->bce_intmask;
if (intstatus == 0)
break;
handled = 1;
/* Ack interrupt */
bus_space_write_4(sc->bce_btag, sc->bce_bhandle, BCE_INT_STS,
intstatus);
/* Receive interrupts. */
if (intstatus & I_RI)
bce_rxintr(sc);
/* Transmit interrupts. */
if (intstatus & I_XI)
bce_txintr(sc);
/* Error interrupts */
if (intstatus & ~(I_RI | I_XI)) {
const char *msg = NULL;
if (intstatus & I_XU)
msg = "transmit fifo underflow";
if (intstatus & I_RO) {
msg = "receive fifo overflow";
ifp->if_ierrors++;
}
if (intstatus & I_RU)
msg = "receive descriptor underflow";
if (intstatus & I_DE)
msg = "descriptor protocol error";
if (intstatus & I_PD)
msg = "data error";
if (intstatus & I_PC)
msg = "descriptor error";
if (intstatus & I_TO)
msg = "general purpose timeout";
if (msg != NULL)
aprint_error_dev(sc->bce_dev, "%s\n", msg);
wantinit = 1;
}
}
if (handled) {
if (wantinit)
bce_init(ifp);
rnd_add_uint32(&sc->rnd_source, intstatus);
/* Try to get more packets going. */
bce_start(ifp);
}
return (handled);
}
int
sacomintr(void *arg)
{
struct sacom_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_char *put, *end;
u_int cc;
u_int sr0, sr1;
if (COM_ISALIVE(sc) == 0)
return 0;
COM_LOCK(sc);
sr0 = bus_space_read_4(iot, ioh, SACOM_SR0);
if (!sr0) {
COM_UNLOCK(sc);
return 0;
}
if (ISSET(sr0, SR0_EIF))
/* XXX silently discard error bits */
bus_space_read_4(iot, ioh, SACOM_DR);
if (ISSET(sr0, SR0_RBB))
bus_space_write_4(iot, ioh, SACOM_SR0, SR0_RBB);
if (ISSET(sr0, SR0_REB)) {
bus_space_write_4(iot, ioh, SACOM_SR0, SR0_REB);
#if defined(DDB) || defined(KGDB)
#ifndef DDB_BREAK_CHAR
if (ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
console_debugger();
}
#endif
#endif /* DDB || KGDB */
}
end = sc->sc_ebuf;
put = sc->sc_rbput;
cc = sc->sc_rbavail;
sr1 = bus_space_read_4(iot, ioh, SACOM_SR1);
if (ISSET(sr0, SR0_RFS | SR0_RID)) {
if (!ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) {
while (cc > 0) {
if (!ISSET(sr1, SR1_RNE)) {
bus_space_write_4(iot, ioh, SACOM_SR0,
SR0_RID);
break;
}
put[0] = bus_space_read_4(iot, ioh, SACOM_DR);
put[1] = sr1;
#if defined(DDB) && defined(DDB_BREAK_CHAR)
if (put[0] == DDB_BREAK_CHAR &&
ISSET(sc->sc_hwflags, COM_HW_CONSOLE)) {
console_debugger();
sr1 = bus_space_read_4(iot, ioh, SACOM_SR1);
continue;
}
#endif
put += 2;
if (put >= end)
put = sc->sc_rbuf;
cc--;
sr1 = bus_space_read_4(iot, ioh, SACOM_SR1);
}
/*
* Current string of incoming characters ended because
* no more data was available or we ran out of space.
* Schedule a receive event if any data was received.
* If we're out of space, turn off receive interrupts.
*/
sc->sc_rbput = put;
sc->sc_rbavail = cc;
if (!ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED))
sc->sc_rx_ready = 1;
/* XXX do RX hardware flow control */
/*
* If we're out of space, disable receive interrupts
* until the queue has drained a bit.
*/
if (!cc) {
SET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED);
CLR(sc->sc_cr3, CR3_RIE);
bus_space_write_4(iot, ioh, SACOM_CR3,
sc->sc_cr3);
}
} else {
#ifdef DIAGNOSTIC
panic("sacomintr: we shouldn't reach here");
#endif
CLR(sc->sc_cr3, CR3_RIE);
bus_space_write_4(iot, ioh, SACOM_CR3, sc->sc_cr3);
}
}
/*
* Done handling any receive interrupts. See if data can be
* transmitted as well. Schedule tx done event if no data left
* and tty was marked busy.
*/
sr0 = bus_space_read_4(iot, ioh, SACOM_SR0);
if (ISSET(sr0, SR0_TFS)) {
/*
* If we've delayed a parameter change, do it now, and restart
* output.
* XXX sacom_loadchannelregs() waits TX completion,
* XXX resulting in ~0.1s hang (300bps, 4 bytes) in worst case
*/
if (sc->sc_heldchange) {
sacom_loadchannelregs(sc);
sc->sc_heldchange = 0;
sc->sc_tbc = sc->sc_heldtbc;
sc->sc_heldtbc = 0;
}
/* Output the next chunk of the contiguous buffer, if any. */
if (sc->sc_tbc > 0) {
sacom_filltx(sc);
} else {
/* Disable transmit completion interrupts if necessary. */
if (ISSET(sc->sc_cr3, CR3_TIE)) {
CLR(sc->sc_cr3, CR3_TIE);
bus_space_write_4(iot, ioh, SACOM_CR3,
sc->sc_cr3);
}
if (sc->sc_tx_busy) {
sc->sc_tx_busy = 0;
sc->sc_tx_done = 1;
}
}
}
COM_UNLOCK(sc);
/* Wake up the poller. */
softint_schedule(sc->sc_si);
#if NRND > 0 && defined(RND_COM)
rnd_add_uint32(&sc->rnd_source, iir | lsr);
#endif
return 1;
}
static int
dbgu_intr(void* arg)
{
struct at91dbgu_softc *sc = arg;
#if 0
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
#endif
u_char *put, *end;
u_int cc;
uint32_t imr, sr;
int c = 0;
imr = DBGUREG(DBGU_IMR);
#if 0
if (!imr)
return 0;
#endif
sr = DBGUREG(DBGU_SR);
if (!(sr & imr)) {
if (sr & DBGU_SR_RXRDY) {
// printf("sr=0x%08x imr=0x%08x\n", sr, imr);
}
return 0;
}
end = sc->sc_ebuf;
put = sc->sc_rbput;
cc = sc->sc_rbavail;
// ok, we DO have some interrupts to serve!
if (sr & DBGU_SR_RXRDY) {
int cn_trapped = 0;
c = DBGUREG(DBGU_RHR);
if (ISSET(sr, (DBGU_SR_OVRE | DBGU_SR_FRAME | DBGU_SR_PARE)))
DBGUREG(DBGU_CR) = DBGU_CR_RSTSTA;
if (ISSET(sr, DBGU_SR_FRAME) && c == 0) {
c = CNC_BREAK;
}
#ifdef DDB
extern int db_active;
if (!db_active)
#endif
cn_check_magic(cn_tab->cn_dev, c, at91dbgu_cnm_state);
if (!cn_trapped && cc) {
put[0] = c & 0xff;
put[1] = sr & 0xff;
put += 2;
if (put >= end)
put = sc->sc_rbuf;
cc--;
/*
* Current string of incoming characters ended because
* no more data was available or we ran out of space.
* Schedule a receive event if any data was received.
* If we're out of space, turn off receive interrupts.
*/
sc->sc_rbput = put;
sc->sc_rbavail = cc;
if (!ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED))
sc->sc_rx_ready = 1;
/*
* See if we are in danger of overflowing a buffer. If
* so, use hardware flow control to ease the pressure.
*/
/* but at91dbgu cannot (yet). X-( */
/*
* If we're out of space, disable receive interrupts
* until the queue has drained a bit.
*/
if (!cc) {
SET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED);
}
}
}
/*
* Done handling any receive interrupts. See if data can be
* transmitted as well. Schedule tx done event if no data left
* and tty was marked busy.
*/
if (ISSET(sr, DBGU_SR_TXRDY) && sc->sc_tbc > 0) {
/* Output the next chunk of the contiguous buffer, if any. */
at91dbgu_filltx(sc);
} else {
/* Disable transmit completion interrupts if necessary. */
DBGUREG(DBGU_IDR) = DBGU_INT_TXRDY;
if (sc->sc_tx_busy) {
sc->sc_tx_busy = 0;
sc->sc_tx_done = 1;
}
}
/* Wake up the poller. */
softint_schedule(sc->sc_si);
#if 0
#ifdef RND_COM
rnd_add_uint32(&sc->rnd_source, imr ^ sr ^ c);
#endif
#endif
return (1);
}
int
sscomrxintr(void *arg)
{
struct sscom_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
u_char *put, *end;
u_int cc;
if (SSCOM_ISALIVE(sc) == 0)
return 0;
SSCOM_LOCK(sc);
end = sc->sc_ebuf;
put = sc->sc_rbput;
cc = sc->sc_rbavail;
do {
u_char msts, delta;
u_char uerstat;
uint32_t ufstat;
ufstat = bus_space_read_4(iot, ioh, SSCOM_UFSTAT);
/* XXX: break interrupt with no character? */
if ( (ufstat & (UFSTAT_RXCOUNT|UFSTAT_RXFULL)) &&
!ISSET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED)) {
while (cc > 0) {
int cn_trapped = 0;
/* get status and received character.
read status register first */
uerstat = sscom_geterr(iot, ioh);
put[0] = sscom_getc(iot, ioh);
if (ISSET(uerstat, UERSTAT_BREAK)) {
int con_trapped = 0;
cn_check_magic(sc->sc_tty->t_dev,
CNC_BREAK, sscom_cnm_state);
if (con_trapped)
continue;
#if defined(KGDB)
if (ISSET(sc->sc_hwflags,
SSCOM_HW_KGDB)) {
kgdb_connect(1);
continue;
}
#endif
}
put[1] = uerstat;
cn_check_magic(sc->sc_tty->t_dev,
put[0], sscom_cnm_state);
if (!cn_trapped) {
put += 2;
if (put >= end)
put = sc->sc_rbuf;
cc--;
}
ufstat = bus_space_read_4(iot, ioh, SSCOM_UFSTAT);
if ( (ufstat & (UFSTAT_RXFULL|UFSTAT_RXCOUNT)) == 0 )
break;
}
/*
* Current string of incoming characters ended because
* no more data was available or we ran out of space.
* Schedule a receive event if any data was received.
* If we're out of space, turn off receive interrupts.
*/
sc->sc_rbput = put;
sc->sc_rbavail = cc;
if (!ISSET(sc->sc_rx_flags, RX_TTY_OVERFLOWED))
sc->sc_rx_ready = 1;
/*
* See if we are in danger of overflowing a buffer. If
* so, use hardware flow control to ease the pressure.
*/
if (!ISSET(sc->sc_rx_flags, RX_IBUF_BLOCKED) &&
cc < sc->sc_r_hiwat) {
SET(sc->sc_rx_flags, RX_IBUF_BLOCKED);
sscom_hwiflow(sc);
}
/*
* If we're out of space, disable receive interrupts
* until the queue has drained a bit.
*/
if (!cc) {
SET(sc->sc_rx_flags, RX_IBUF_OVERFLOWED);
sscom_disable_rxint(sc);
sc->sc_ucon &= ~UCON_ERRINT;
bus_space_write_4(iot, ioh, SSCOM_UCON, sc->sc_ucon);
}
}
msts = sc->sc_read_modem_status(sc);
delta = msts ^ sc->sc_msts;
sc->sc_msts = msts;
#ifdef notyet
/*
* Pulse-per-second (PSS) signals on edge of DCD?
* Process these even if line discipline is ignoring DCD.
*/
if (delta & sc->sc_ppsmask) {
struct timeval tv;
if ((msr & sc->sc_ppsmask) == sc->sc_ppsassert) {
/* XXX nanotime() */
microtime(&tv);
TIMEVAL_TO_TIMESPEC(&tv,
&sc->ppsinfo.assert_timestamp);
if (sc->ppsparam.mode & PPS_OFFSETASSERT) {
timespecadd(&sc->ppsinfo.assert_timestamp,
&sc->ppsparam.assert_offset,
&sc->ppsinfo.assert_timestamp);
}
#ifdef PPS_SYNC
if (sc->ppsparam.mode & PPS_HARDPPSONASSERT)
hardpps(&tv, tv.tv_usec);
#endif
sc->ppsinfo.assert_sequence++;
sc->ppsinfo.current_mode = sc->ppsparam.mode;
} else if ((msr & sc->sc_ppsmask) == sc->sc_ppsclear) {
/* XXX nanotime() */
microtime(&tv);
TIMEVAL_TO_TIMESPEC(&tv,
&sc->ppsinfo.clear_timestamp);
if (sc->ppsparam.mode & PPS_OFFSETCLEAR) {
timespecadd(&sc->ppsinfo.clear_timestamp,
&sc->ppsparam.clear_offset,
&sc->ppsinfo.clear_timestamp);
}
#ifdef PPS_SYNC
if (sc->ppsparam.mode & PPS_HARDPPSONCLEAR)
hardpps(&tv, tv.tv_usec);
#endif
sc->ppsinfo.clear_sequence++;
sc->ppsinfo.current_mode = sc->ppsparam.mode;
}
}
#endif
/*
* Process normal status changes
*/
if (ISSET(delta, sc->sc_msr_mask)) {
SET(sc->sc_msr_delta, delta);
/*
* Stop output immediately if we lose the output
* flow control signal or carrier detect.
*/
if (ISSET(~msts, sc->sc_msr_mask)) {
sc->sc_tbc = 0;
sc->sc_heldtbc = 0;
#ifdef SSCOM_DEBUG
if (sscom_debug)
sscomstatus(sc, "sscomintr ");
#endif
}
sc->sc_st_check = 1;
}
/*
* Done handling any receive interrupts.
*/
/*
* If we've delayed a parameter change, do it
* now, and restart * output.
*/
if ((ufstat & UFSTAT_TXCOUNT) == 0) {
/* XXX: we should check transmitter empty also */
if (sc->sc_heldchange) {
sscom_loadchannelregs(sc);
sc->sc_heldchange = 0;
sc->sc_tbc = sc->sc_heldtbc;
sc->sc_heldtbc = 0;
}
}
} while (0);
SSCOM_UNLOCK(sc);
/* Wake up the poller. */
softint_schedule(sc->sc_si);
#ifdef RND_COM
rnd_add_uint32(&sc->rnd_source, iir | rsr);
#endif
return 1;
}
static void
ucomreadcb(usbd_xfer_handle xfer, usbd_private_handle p, usbd_status status)
{
struct ucom_softc *sc = (struct ucom_softc *)p;
struct tty *tp = sc->sc_tty;
struct ucom_buffer *ub;
u_int32_t cc;
u_char *cp;
int s;
ub = SIMPLEQ_FIRST(&sc->sc_ibuff_empty);
SIMPLEQ_REMOVE_HEAD(&sc->sc_ibuff_empty, ub_link);
if (status == USBD_CANCELLED || status == USBD_IOERROR ||
sc->sc_dying) {
DPRINTF(("ucomreadcb: dying\n"));
ub->ub_index = ub->ub_len = 0;
/* Send something to wake upper layer */
s = spltty();
if (status != USBD_CANCELLED) {
(tp->t_linesw->l_rint)('\n', tp);
mutex_spin_enter(&tty_lock); /* XXX */
ttwakeup(tp);
mutex_spin_exit(&tty_lock); /* XXX */
}
splx(s);
return;
}
if (status == USBD_STALLED) {
usbd_clear_endpoint_stall_async(sc->sc_bulkin_pipe);
ucomsubmitread(sc, ub);
return;
}
if (status != USBD_NORMAL_COMPLETION) {
printf("ucomreadcb: wonky status=%s\n", usbd_errstr(status));
return;
}
usbd_get_xfer_status(xfer, NULL, (void *)&cp, &cc, NULL);
if (cc == 0) {
aprint_normal_dev(sc->sc_dev,
"ucomreadcb: zero length xfer!\n");
}
KDASSERT(cp == ub->ub_data);
#if defined(__NetBSD__) && NRND > 0
rnd_add_uint32(&sc->sc_rndsource, cc);
#endif
if (sc->sc_opening) {
ucomsubmitread(sc, ub);
return;
}
if (sc->sc_methods->ucom_read != NULL) {
sc->sc_methods->ucom_read(sc->sc_parent, sc->sc_portno,
&cp, &cc);
ub->ub_index = (u_int)(cp - ub->ub_data);
} else
ub->ub_index = 0;
ub->ub_len = cc;
SIMPLEQ_INSERT_TAIL(&sc->sc_ibuff_full, ub, ub_link);
ucom_read_complete(sc);
}
int
sscomtxintr(void *arg)
{
struct sscom_softc *sc = arg;
bus_space_tag_t iot = sc->sc_iot;
bus_space_handle_t ioh = sc->sc_ioh;
uint32_t ufstat;
if (SSCOM_ISALIVE(sc) == 0)
return 0;
SSCOM_LOCK(sc);
ufstat = bus_space_read_4(iot, ioh, SSCOM_UFSTAT);
/*
* If we've delayed a parameter change, do it
* now, and restart * output.
*/
if (sc->sc_heldchange && (ufstat & UFSTAT_TXCOUNT) == 0) {
/* XXX: we should check transmitter empty also */
sscom_loadchannelregs(sc);
sc->sc_heldchange = 0;
sc->sc_tbc = sc->sc_heldtbc;
sc->sc_heldtbc = 0;
}
/*
* See if data can be transmitted as well. Schedule tx
* done event if no data left and tty was marked busy.
*/
if (!ISSET(ufstat,UFSTAT_TXFULL)) {
/*
* Output the next chunk of the contiguous
* buffer, if any.
*/
if (sc->sc_tbc > 0) {
__sscom_output_chunk(sc, ufstat);
}
else {
/*
* Disable transmit sscompletion
* interrupts if necessary.
*/
if (sc->sc_hwflags & SSCOM_HW_TXINT)
sscom_disable_txint(sc);
if (sc->sc_tx_busy) {
sc->sc_tx_busy = 0;
sc->sc_tx_done = 1;
}
}
}
SSCOM_UNLOCK(sc);
/* Wake up the poller. */
softint_schedule(sc->sc_si);
#ifdef RND_COM
rnd_add_uint32(&sc->rnd_source, iir | rsr);
#endif
return 1;
}