/**
* @brief Initialize device TX queue
*
* @param devId uint8_t, ID of DPDK device
* @param queueId uint16_t, TX queue ID to initialize
* @param desc uint16_t, max queue description length
*
* @return 0 if success and DPDK related error code otherwice
*/
int DPDKAdapter::initTxQueue(uint8_t devId, uint16_t queueId, uint16_t desc)
{
if(devId > RTE_MAX_ETHPORTS)
{
qCritical("Device ID is out of range");
return -1;
}
qDebug("Initializing TX queue %d of device %d", queueId, devId);
struct rte_eth_txconf txConf;
//Set default TX queue params
memset(&txConf, 0, sizeof(rte_eth_txconf));
txConf.tx_thresh.pthresh = DPDK_TX_PTHRESH;
txConf.tx_thresh.hthresh = DPDK_TX_HTHRESH;
txConf.tx_thresh.wthresh = DPDK_TX_WTHRESH;
int ret = rte_eth_tx_queue_setup(devId,
queueId,
desc,
SOCKET_ID_ANY,
&txConf);
if(ret < 0)
qCritical("TX Queue setup error: err=%d, dev=%u", ret, (unsigned) devId);
return ret;
}
static void
app_init_ports(void)
{
uint32_t i;
/* Init driver */
RTE_LOG(INFO, USER1, "Initializing the PMD driver ...\n");
if (rte_eal_pci_probe() < 0)
rte_panic("Cannot probe PCI\n");
/* Init NIC ports, then start the ports */
for (i = 0; i < app.n_ports; i++) {
uint8_t port;
int ret;
port = (uint8_t) app.ports[i];
RTE_LOG(INFO, USER1, "Initializing NIC port %u ...\n", port);
/* Init port */
ret = rte_eth_dev_configure(
port,
1,
1,
&port_conf);
if (ret < 0)
rte_panic("Cannot init NIC port %u (%d)\n", port, ret);
rte_eth_promiscuous_enable(port);
/* Init RX queues */
ret = rte_eth_rx_queue_setup(
port,
0,
app.port_rx_ring_size,
rte_eth_dev_socket_id(port),
&rx_conf,
app.pool);
if (ret < 0)
rte_panic("Cannot init RX for port %u (%d)\n",
(uint32_t) port, ret);
/* Init TX queues */
ret = rte_eth_tx_queue_setup(
port,
0,
app.port_tx_ring_size,
rte_eth_dev_socket_id(port),
&tx_conf);
if (ret < 0)
rte_panic("Cannot init TX for port %u (%d)\n",
(uint32_t) port, ret);
/* Start port */
ret = rte_eth_dev_start(port);
if (ret < 0)
rte_panic("Cannot start port %u (%d)\n", port, ret);
}
app_ports_check_link();
}
static bool config_port(uint8_t port, bool simple_tx) {
int rc = rte_eth_dev_configure(port, 1, 1, &port_conf);
if (rc) {
printf("Configure %d failed: %d\n", port, rc);
return false;
}
tx_conf.txq_flags = simple_tx
? ETH_TXQ_FLAGS_NOMULTSEGS | ETH_TXQ_FLAGS_NOOFFLOADS
: ETH_TXQ_FLAGS_NOMULTSEGS;
rc = rte_eth_tx_queue_setup(port, 0, TX_DESCS, rte_socket_id(), &tx_conf);
if (rc) {
printf("could not configure tx queue on port %d: %d\n", port, rc);
return false;
}
// dev_start segfaults without a rx queue
rc = rte_eth_rx_queue_setup(port, 0, RX_DESCS, rte_socket_id(), &rx_conf, make_mempool());
if (rc) {
printf("could not configure tx queue on port %d: %d\n", port, rc);
return false;
}
rc = rte_eth_dev_start(port);
if (rc) {
printf("failed to start port %d: %d\n", port, rc);
return false;
}
return true;
}
/* Setup ethdev hardware queues */
static int
dpdk_ethdev_queues_setup(struct vr_dpdk_ethdev *ethdev)
{
int ret, i;
uint8_t port_id = ethdev->ethdev_port_id;
struct rte_mempool *mempool;
/* configure RX queues */
RTE_LOG(DEBUG, VROUTER, "%s: nb_rx_queues=%u nb_tx_queues=%u\n",
__func__, (unsigned)ethdev->ethdev_nb_rx_queues,
(unsigned)ethdev->ethdev_nb_tx_queues);
for (i = 0; i < VR_DPDK_MAX_NB_RX_QUEUES; i++) {
if (i < ethdev->ethdev_nb_rss_queues) {
mempool = vr_dpdk.rss_mempool;
ethdev->ethdev_queue_states[i] = VR_DPDK_QUEUE_RSS_STATE;
} else if (i < ethdev->ethdev_nb_rx_queues) {
if (vr_dpdk.nb_free_mempools == 0) {
RTE_LOG(ERR, VROUTER, " error assigning mempool to eth device %"
PRIu8 " RX queue %d\n", port_id, i);
return -ENOMEM;
}
vr_dpdk.nb_free_mempools--;
mempool = vr_dpdk.free_mempools[vr_dpdk.nb_free_mempools];
ethdev->ethdev_queue_states[i] = VR_DPDK_QUEUE_READY_STATE;
} else {
ethdev->ethdev_queue_states[i] = VR_DPDK_QUEUE_NONE;
continue;
}
ret = rte_eth_rx_queue_setup(port_id, i, VR_DPDK_NB_RXD,
rte_eth_dev_socket_id(port_id), &rx_queue_conf, mempool);
if (ret < 0) {
/* return mempool to the list */
if (mempool != vr_dpdk.rss_mempool)
vr_dpdk.nb_free_mempools++;
RTE_LOG(ERR, VROUTER, " error setting up eth device %" PRIu8 " RX queue %d"
": %s (%d)\n", port_id, i, rte_strerror(-ret), -ret);
return ret;
}
/* save queue mempool pointer */
ethdev->ethdev_mempools[i] = mempool;
}
i = ethdev->ethdev_nb_rx_queues - ethdev->ethdev_nb_rss_queues;
RTE_LOG(INFO, VROUTER, " setup %d RSS queue(s) and %d filtering queue(s)\n",
(int)ethdev->ethdev_nb_rss_queues, i);
/* configure TX queues */
for (i = 0; i < ethdev->ethdev_nb_tx_queues; i++) {
ret = rte_eth_tx_queue_setup(port_id, i, VR_DPDK_NB_TXD,
rte_eth_dev_socket_id(port_id), &tx_queue_conf);
if (ret < 0) {
RTE_LOG(ERR, VROUTER, " error setting up eth device %" PRIu8 " TX queue %d"
": %s (%d)\n", port_id, i, rte_strerror(-ret), -ret);
return ret;
}
}
return 0;
}
/**
* Initialise an individual port:
* - configure number of rx and tx rings
* - set up each rx ring, to pull from the main mbuf pool
* - set up each tx ring
* - start the port and report its status to stdout
*/
static int
init_port(uint8_t port_num)
{
/* for port configuration all features are off by default */
const struct rte_eth_conf port_conf = {
.rxmode = {
.mq_mode = ETH_RSS
}
};
const uint16_t rx_rings = 1, tx_rings = num_clients;
const uint16_t rx_ring_size = RTE_MP_RX_DESC_DEFAULT;
const uint16_t tx_ring_size = RTE_MP_TX_DESC_DEFAULT;
struct rte_eth_link link;
uint16_t q;
int retval;
printf("Port %u init ... ", (unsigned)port_num);
fflush(stdout);
/* Standard DPDK port initialisation - config port, then set up
* rx and tx rings */
if ((retval = rte_eth_dev_configure(port_num, rx_rings, tx_rings,
&port_conf)) != 0)
return retval;
for (q = 0; q < rx_rings; q++) {
retval = rte_eth_rx_queue_setup(port_num, q, rx_ring_size,
SOCKET0, &rx_conf_default, pktmbuf_pool);
if (retval < 0) return retval;
}
for ( q = 0; q < tx_rings; q ++ ) {
retval = rte_eth_tx_queue_setup(port_num, q, tx_ring_size,
SOCKET0, &tx_conf_default);
if (retval < 0) return retval;
}
rte_eth_promiscuous_enable(port_num);
retval = rte_eth_dev_start(port_num);
if (retval < 0) return retval;
printf( "done: ");
/* get link status */
rte_eth_link_get(port_num, &link);
if (link.link_status) {
printf(" Link Up - speed %u Mbps - %s\n",
(uint32_t) link.link_speed,
(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex\n"));
} else {
printf(" Link Down\n");
}
return 0;
}
int
tcpreplay_netport_init(struct arguments *args)
{
int ret;
uint8_t rss_key [40];
struct rte_eth_link link;
struct rte_eth_dev_info dev_info;
struct rte_eth_rss_conf rss_conf;
struct rte_eth_fdir fdir_conf;
/* Retreiving and printing device infos */
rte_eth_dev_info_get(i, &dev_info);
printf("Name:%s\n\tDriver name: %s\n\tMax rx queues: %d\n\tMax tx queues: %d\n", dev_info.pci_dev->driver->name,dev_info.driver_name, dev_info.max_rx_queues, dev_info.max_tx_queues);
printf("\tPCI Adress: %04d:%02d:%02x:%01d\n", dev_info.pci_dev->addr.domain, dev_info.pci_dev->addr.bus, dev_info.pci_dev->addr.devid, dev_info.pci_dev->addr.function);
/* Configure device with '1' rx queues and 1 tx queue */
ret = rte_eth_dev_configure(i, 1, 1, &port_conf);
if (ret < 0) rte_panic("Error configuring the port\n");
/* For each RX queue in each NIC */
/* Configure rx queue j of current device on current NUMA socket. It takes elements from the mempool */
ret = rte_eth_rx_queue_setup(i, 0, RX_QUEUE_SZ, rte_socket_id(), &rx_conf, pktmbuf_pool);
if (ret < 0) FATAL_ERROR("Error configuring receiving queue\n");
/* Configure mapping [queue] -> [element in stats array] */
ret = rte_eth_dev_set_rx_queue_stats_mapping (i, 0, 0);
if (ret < 0) FATAL_ERROR("Error configuring receiving queue stats\n");
/* Configure tx queue of current device on current NUMA socket. Mandatory configuration even if you want only rx packet */
ret = rte_eth_tx_queue_setup(i, 0, TX_QUEUE_SZ, rte_socket_id(), &tx_conf);
if (ret < 0) FATAL_ERROR("Error configuring transmitting queue. Errno: %d (%d bad arg, %d no mem)\n", -ret, EINVAL ,ENOMEM);
/* Start device */
ret = rte_eth_dev_start(i);
if (ret < 0) FATAL_ERROR("Cannot start port\n");
/* Enable receipt in promiscuous mode for an Ethernet device */
rte_eth_promiscuous_enable(i);
/* Print link status */
rte_eth_link_get_nowait(i, &link);
if (link.link_status) printf("\tPort %d Link Up - speed %u Mbps - %s\n", (uint8_t)i, (unsigned)link.link_speed,(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?("full-duplex") : ("half-duplex\n"));
else printf("\tPort %d Link Down\n",(uint8_t)i);
/* Print RSS support, not reliable because a NIC could support rss configuration just in rte_eth_dev_configure whithout supporting rte_eth_dev_rss_hash_conf_get*/
rss_conf.rss_key = rss_key;
ret = rte_eth_dev_rss_hash_conf_get (i,&rss_conf);
if (ret == 0) printf("\tDevice supports RSS\n"); else printf("\tDevice DOES NOT support RSS\n");
/* Print Flow director support */
ret = rte_eth_dev_fdir_get_infos (i, &fdir_conf);
if (ret == 0) printf("\tDevice supports Flow Director\n"); else printf("\tDevice DOES NOT support Flow Director\n");
if (args)
return 1;
return 1;
}
static void
bond_port_init(struct rte_mempool *mbuf_pool)
{
int retval;
uint8_t i;
retval = rte_eth_bond_create("bond0", BONDING_MODE_ALB,
0 /*SOCKET_ID_ANY*/);
if (retval < 0)
rte_exit(EXIT_FAILURE,
"Faled to create bond port\n");
BOND_PORT = (uint8_t)retval;
retval = rte_eth_dev_configure(BOND_PORT, 1, 1, &port_conf);
if (retval != 0)
rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n",
BOND_PORT, retval);
/* RX setup */
retval = rte_eth_rx_queue_setup(BOND_PORT, 0, RTE_RX_DESC_DEFAULT,
rte_eth_dev_socket_id(BOND_PORT), NULL,
mbuf_pool);
if (retval < 0)
rte_exit(retval, " port %u: RX queue 0 setup failed (res=%d)",
BOND_PORT, retval);
/* TX setup */
retval = rte_eth_tx_queue_setup(BOND_PORT, 0, RTE_TX_DESC_DEFAULT,
rte_eth_dev_socket_id(BOND_PORT), NULL);
if (retval < 0)
rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
BOND_PORT, retval);
for (i = 0; i < slaves_count; i++) {
if (rte_eth_bond_slave_add(BOND_PORT, slaves[i]) == -1)
rte_exit(-1, "Oooops! adding slave (%u) to bond (%u) failed!\n",
slaves[i], BOND_PORT);
}
retval = rte_eth_dev_start(BOND_PORT);
if (retval < 0)
rte_exit(retval, "Start port %d failed (res=%d)", BOND_PORT, retval);
rte_eth_promiscuous_enable(BOND_PORT);
struct ether_addr addr;
rte_eth_macaddr_get(BOND_PORT, &addr);
printf("Port %u MAC: ", (unsigned)BOND_PORT);
PRINT_MAC(addr);
printf("\n");
}
static void
app_init_ports(void)
{
uint32_t i;
/* Init NIC ports, then start the ports */
for (i = 0; i < app.n_ports; i++) {
uint32_t port;
int ret;
port = app.ports[i];
RTE_LOG(INFO, USER1, "Initializing NIC port %u ...\n", port);
/* Init port */
ret = rte_eth_dev_configure(
port,
1,
1,
&app.port_conf);
if (ret < 0)
rte_panic("Cannot init NIC port %u (%d)\n", port, ret);
rte_eth_promiscuous_enable(port);
/* Init RX queues */
ret = rte_eth_rx_queue_setup(
port,
0,
app.rsz_hwq_rx,
rte_eth_dev_socket_id(port),
&app.rx_conf,
app.pool);
if (ret < 0)
rte_panic("Cannot init RX for port %u (%d)\n",
(uint32_t) port, ret);
/* Init TX queues */
ret = rte_eth_tx_queue_setup(
port,
0,
app.rsz_hwq_tx,
rte_eth_dev_socket_id(port),
&app.tx_conf);
if (ret < 0)
rte_panic("Cannot init TX for port %u (%d)\n", port,
ret);
/* Start port */
ret = rte_eth_dev_start(port);
if (ret < 0)
rte_panic("Cannot start port %u (%d)\n", port, ret);
}
app_ports_check_link();
}
int
VIFHYPER_CREATE(const char *devstr, struct virtif_sc *vif_sc, uint8_t *enaddr,
struct virtif_user **viup)
{
struct rte_eth_conf portconf;
struct rte_eth_link link;
struct ether_addr ea;
struct virtif_user *viu;
int rv = EINVAL; /* XXX: not very accurate ;) */
viu = malloc(sizeof(*viu));
memset(viu, 0, sizeof(*viu));
viu->viu_devstr = strdup(devstr);
viu->viu_virtifsc = vif_sc;
/* this is here only for simplicity */
if ((rv = globalinit(viu)) != 0)
goto out;
memset(&portconf, 0, sizeof(portconf));
if ((rv = rte_eth_dev_configure(IF_PORTID,
NQUEUE, NQUEUE, &portconf)) < 0)
OUT("configure device");
if ((rv = rte_eth_rx_queue_setup(IF_PORTID,
0, NDESCRX, 0, &rxconf, mbpool_rx)) <0)
OUT("rx queue setup");
if ((rv = rte_eth_tx_queue_setup(IF_PORTID, 0, NDESCTX, 0, &txconf)) < 0)
OUT("tx queue setup");
if ((rv = rte_eth_dev_start(IF_PORTID)) < 0)
OUT("device start");
rte_eth_link_get(IF_PORTID, &link);
if (!link.link_status) {
ifwarn(viu, "link down");
}
rte_eth_promiscuous_enable(IF_PORTID);
rte_eth_macaddr_get(IF_PORTID, &ea);
memcpy(enaddr, ea.addr_bytes, ETHER_ADDR_LEN);
rv = pthread_create(&viu->viu_rcvpt, NULL, receiver, viu);
out:
/* XXX: well this isn't much of an unrolling ... */
if (rv != 0)
free(viu);
else
*viup = viu;
return rumpuser_component_errtrans(-rv);
}
static inline int
port_init(uint16_t port, struct rte_mempool *mbuf_pool)
{
struct rte_eth_conf port_conf = port_conf_default;
const uint16_t rx_rings = 1, tx_rings = 1;
int retval;
uint16_t q;
if (port >= rte_eth_dev_count())
return -1;
/* Configure the Ethernet device. */
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval != 0)
return retval;
/* Allocate and set up 1 RX queue per Ethernet port. */
for (q = 0; q < rx_rings; q++) {
retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
rte_eth_dev_socket_id(port), NULL, mbuf_pool);
if (retval < 0)
return retval;
}
/* Allocate and set up 1 TX queue per Ethernet port. */
for (q = 0; q < tx_rings; q++) {
retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
rte_eth_dev_socket_id(port), NULL);
if (retval < 0)
return retval;
}
/* Start the Ethernet port. */
retval = rte_eth_dev_start(port);
if (retval < 0)
return retval;
/* Display the port MAC address. */
struct ether_addr addr;
rte_eth_macaddr_get(port, &addr);
printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
" %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
(unsigned int)port,
addr.addr_bytes[0], addr.addr_bytes[1],
addr.addr_bytes[2], addr.addr_bytes[3],
addr.addr_bytes[4], addr.addr_bytes[5]);
/* Enable RX in promiscuous mode for the Ethernet device. */
rte_eth_promiscuous_enable(port);
return 0;
}
/**
* Initialise an individual port:
* - configure number of rx and tx rings
* - set up each rx ring, to pull from the main mbuf pool
* - set up each tx ring
* - start the port and report its status to stdout
*/
int
init_port(uint8_t port_num)
{
/* for port configuration all features are off by default */\
const struct rte_eth_conf port_conf = {
.rxmode = {
.hw_vlan_filter = 0,
.hw_vlan_strip = 0,
.hw_vlan_extend = 0,
.mq_mode = ETH_MQ_RX_RSS
}
};
const uint16_t rx_rings = 1, tx_rings = 1;
const uint16_t rx_ring_size = RTE_MP_RX_DESC_DEFAULT;
const uint16_t tx_ring_size = RTE_MP_TX_DESC_DEFAULT;
uint16_t q;
int retval;
printf("Port %u init ... ", (unsigned)port_num);
fflush(stdout);
/* Standard DPDK port initialisation - config port, then set up
* rx and tx rings */
if ((retval = rte_eth_dev_configure(port_num, rx_rings, tx_rings,
&port_conf)) != 0)
return retval;
for (q = 0; q < rx_rings; q++) {
retval = rte_eth_rx_queue_setup(port_num, q, rx_ring_size,
rte_eth_dev_socket_id(port_num),
NULL, pktmbuf_pool);
if (retval < 0) return retval;
}
for ( q = 0; q < tx_rings; q ++ ) {
retval = rte_eth_tx_queue_setup(port_num, q, tx_ring_size,
rte_eth_dev_socket_id(port_num),
NULL);
if (retval < 0) return retval;
}
rte_eth_promiscuous_enable(port_num);
retval = rte_eth_dev_start(port_num);
if (retval < 0) return retval;
printf( "Port %d Init done\n", port_num);
return 0;
}
/*
* Initialises a given port using global settings and with the rx buffers
* coming from the mbuf_pool passed as parameter
*/
static inline int
port_init(uint8_t port, struct rte_mempool *mbuf_pool)
{
struct rte_eth_conf port_conf;
const uint16_t rxRings = ETH_VMDQ_DCB_NUM_QUEUES,
txRings = (uint16_t)rte_lcore_count();
const uint16_t rxRingSize = 128, txRingSize = 512;
int retval;
uint16_t q;
retval = get_eth_conf(&port_conf, num_pools);
if (retval < 0)
return retval;
if (port >= rte_eth_dev_count()) return -1;
retval = rte_eth_dev_configure(port, rxRings, txRings, &port_conf);
if (retval != 0)
return retval;
for (q = 0; q < rxRings; q ++) {
retval = rte_eth_rx_queue_setup(port, q, rxRingSize,
rte_eth_dev_socket_id(port),
NULL,
mbuf_pool);
if (retval < 0)
return retval;
}
for (q = 0; q < txRings; q ++) {
retval = rte_eth_tx_queue_setup(port, q, txRingSize,
rte_eth_dev_socket_id(port),
NULL);
if (retval < 0)
return retval;
}
retval = rte_eth_dev_start(port);
if (retval < 0)
return retval;
struct ether_addr addr;
rte_eth_macaddr_get(port, &addr);
printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
(unsigned)port,
addr.addr_bytes[0], addr.addr_bytes[1], addr.addr_bytes[2],
addr.addr_bytes[3], addr.addr_bytes[4], addr.addr_bytes[5]);
return 0;
}
static void
slave_port_init(uint16_t portid, struct rte_mempool *mbuf_pool)
{
int retval;
uint16_t nb_rxd = RTE_RX_DESC_DEFAULT;
uint16_t nb_txd = RTE_TX_DESC_DEFAULT;
if (portid >= rte_eth_dev_count())
rte_exit(EXIT_FAILURE, "Invalid port\n");
retval = rte_eth_dev_configure(portid, 1, 1, &port_conf);
if (retval != 0)
rte_exit(EXIT_FAILURE, "port %u: configuration failed (res=%d)\n",
portid, retval);
retval = rte_eth_dev_adjust_nb_rx_tx_desc(portid, &nb_rxd, &nb_txd);
if (retval != 0)
rte_exit(EXIT_FAILURE, "port %u: rte_eth_dev_adjust_nb_rx_tx_desc "
"failed (res=%d)\n", portid, retval);
/* RX setup */
retval = rte_eth_rx_queue_setup(portid, 0, nb_rxd,
rte_eth_dev_socket_id(portid), NULL,
mbuf_pool);
if (retval < 0)
rte_exit(retval, " port %u: RX queue 0 setup failed (res=%d)",
portid, retval);
/* TX setup */
retval = rte_eth_tx_queue_setup(portid, 0, nb_txd,
rte_eth_dev_socket_id(portid), NULL);
if (retval < 0)
rte_exit(retval, "port %u: TX queue 0 setup failed (res=%d)",
portid, retval);
retval = rte_eth_dev_start(portid);
if (retval < 0)
rte_exit(retval,
"Start port %d failed (res=%d)",
portid, retval);
struct ether_addr addr;
rte_eth_macaddr_get(portid, &addr);
printf("Port %u MAC: ", portid);
PRINT_MAC(addr);
printf("\n");
}
int32_t interfaceSetup(void)
{
uint8_t portIndex = 0, portCount = rte_eth_dev_count();
int32_t ret = 0, socket_id = -1;
struct rte_eth_link link;
for (portIndex = 0; portIndex < portCount; portIndex++)
{
/* fetch the socket Id to which the port the mapped */
for (ret = 0; ret < GTP_MAX_NUMANODE; ret++)
{
if (numaNodeInfo[ret].intfTotal) {
if (numaNodeInfo[ret].intfAvail & (1 << portIndex)) {
socket_id = ret;
break;
}
}
}
memset(&link, 0x00, sizeof(struct rte_eth_link));
ret = rte_eth_dev_configure(portIndex, 1, 1, &portConf);
if (unlikely(ret < 0))
{
rte_panic("ERROR: Dev Configure\n");
return -1;
}
ret = rte_eth_rx_queue_setup(portIndex, 0, RTE_TEST_RX_DESC_DEFAULT,
0, NULL, numaNodeInfo[socket_id].rx[0]);
if (unlikely(ret < 0))
{
rte_panic("ERROR: Rx Queue Setup\n");
return -2;
}
ret = rte_eth_tx_queue_setup(portIndex, 0, RTE_TEST_TX_DESC_DEFAULT,
0, NULL);
if (unlikely(ret < 0))
{
rte_panic("ERROR: Tx Queue Setup\n");
return -3;
}
rte_eth_promiscuous_enable(portIndex);
rte_eth_dev_start(portIndex);
}
return 0;
}
int
rw_piot_tx_queue_setup(rw_piot_api_handle_t api_handle,
uint16_t tx_queue_id,
uint16_t nb_tx_desc,
unsigned int socket_id,
const struct rte_eth_txconf *tx_conf)
{
rw_piot_device_t *rw_piot_dev = RWPIOT_GET_DEVICE(api_handle);
ASSERT(RWPIOT_VALID_DEVICE(rw_piot_dev));
if (NULL == rw_piot_dev) {
RW_PIOT_LOG(RTE_LOG_ERR, "PIOT Could not find device by handle\n");
return -1;
}
return(rte_eth_tx_queue_setup(rw_piot_dev->rte_port_id, tx_queue_id, nb_tx_desc, socket_id, tx_conf));
}
/*
* Initialises a given port using global settings and with the rx buffers
* coming from the mbuf_pool passed as parameter
*/
static inline int
port_init(uint8_t port, struct rte_mempool *mbuf_pool)
{
struct rte_eth_conf port_conf = port_conf_default;
const uint16_t rx_rings = 1, tx_rings = 1;
int retval;
uint16_t q;
if (port >= rte_eth_dev_count())
return -1;
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval != 0)
return retval;
for (q = 0; q < rx_rings; q++) {
retval = rte_eth_rx_queue_setup(port, q, RX_RING_SIZE,
rte_eth_dev_socket_id(port), NULL, mbuf_pool);
if (retval < 0)
return retval;
}
for (q = 0; q < tx_rings; q++) {
retval = rte_eth_tx_queue_setup(port, q, TX_RING_SIZE,
rte_eth_dev_socket_id(port), NULL);
if (retval < 0)
return retval;
}
retval = rte_eth_dev_start(port);
if (retval < 0)
return retval;
struct ether_addr addr;
rte_eth_macaddr_get(port, &addr);
printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
(unsigned)port,
addr.addr_bytes[0], addr.addr_bytes[1],
addr.addr_bytes[2], addr.addr_bytes[3],
addr.addr_bytes[4], addr.addr_bytes[5]);
rte_eth_promiscuous_enable(port);
return 0;
}
static int setup_and_bond_ports(struct rte_mempool *mp)
{
int portid, queueid;
int ret;
int pl_idx;
int nb_queue;
nb_queue = rte_lcore_count();
nb_port = rte_eth_dev_count();
memset(lcore_args, 0, sizeof(struct lcore_arg_t) * RTE_MAX_LCORE);
for(portid = 0; portid < nb_port; portid++)
{
ret = rte_eth_dev_configure(portid, nb_queue, nb_queue, &port_conf);
if(unlikely(ret < 0))
{
rte_exit(EINVAL, "port %d configure failed!\n", portid);
}
for(queueid = 0; queueid < nb_queue; queueid++)
{
ret = rte_eth_rx_queue_setup(portid, queueid, NB_RXD, rte_socket_id(), NULL, mp);
if(unlikely(ret < 0))
{
rte_exit(EINVAL, "port %d rx queue %d setup failed!\n", portid, queueid);
}
ret = rte_eth_tx_queue_setup(portid, queueid, NB_TXD, rte_socket_id(), NULL);
if(unlikely(ret < 0))
{
rte_exit(EINVAL, "port %d tx queue %d setup failed!\n", portid, queueid);
}
pl_idx = lcore_args[queueid].pl_len;
lcore_args[queueid].pl[pl_idx].portid = portid;
lcore_args[queueid].pl[pl_idx].queueid = queueid;
lcore_args[queueid].mp = mp;
lcore_args[queueid].pl_len = pl_idx + 1;
}
ret = rte_eth_dev_start(portid);
if(unlikely(ret < 0))
{
rte_exit(EINVAL, "port %d start failed!\n", portid);
}
rte_eth_promiscuous_enable(portid);
}
return 0;
}
static inline int
configure_eth_port(uint8_t port_id)
{
struct ether_addr addr;
const uint16_t rxRings = 1, txRings = 1;
const uint8_t nb_ports = rte_eth_dev_count();
int ret;
uint16_t q;
if (port_id > nb_ports)
return -1;
ret = rte_eth_dev_configure(port_id, rxRings, txRings, &port_conf_default);
if (ret != 0)
return ret;
for (q = 0; q < rxRings; q++) {
ret = rte_eth_rx_queue_setup(port_id, q, RX_DESC_PER_QUEUE,
rte_eth_dev_socket_id(port_id), NULL,
mbuf_pool);
if (ret < 0)
return ret;
}
for (q = 0; q < txRings; q++) {
ret = rte_eth_tx_queue_setup(port_id, q, TX_DESC_PER_QUEUE,
rte_eth_dev_socket_id(port_id), NULL);
if (ret < 0)
return ret;
}
ret = rte_eth_dev_start(port_id);
if (ret < 0)
return ret;
rte_eth_macaddr_get(port_id, &addr);
printf("Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
(unsigned)port_id,
addr.addr_bytes[0], addr.addr_bytes[1],
addr.addr_bytes[2], addr.addr_bytes[3],
addr.addr_bytes[4], addr.addr_bytes[5]);
rte_eth_promiscuous_enable(port_id);
return 0;
}
void configure_eth_port(uint8_t port_id)
{
int ret;
rte_eth_dev_stop(port_id);
ret = rte_eth_dev_configure(port_id, 1, 1, &port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure port %u (error %d)\n",
(unsigned) port_id, ret);
/* Initialize the port's RX queue */
ret = rte_eth_rx_queue_setup(port_id, 0, RX_DESC_PER_QUEUE,
rte_eth_dev_socket_id(port_id),
NULL,
mbuf_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Failed to setup RX queue on "
"port %u (error %d)\n", (unsigned) port_id, ret);
/* Initialize the port's TX queue */
ret = rte_eth_tx_queue_setup(port_id, 0, TX_DESC_PER_QUEUE,
rte_eth_dev_socket_id(port_id),
NULL);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Failed to setup TX queue on "
"port %u (error %d)\n", (unsigned) port_id, ret);
/* Initialize the port's flow control */
ret = rte_eth_dev_flow_ctrl_set(port_id, &fc_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Failed to setup hardware flow control on "
"port %u (error %d)\n", (unsigned) port_id, ret);
/* Start the port */
ret = rte_eth_dev_start(port_id);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Failed to start port %u (error %d)\n",
(unsigned) port_id, ret);
/* Put it in promiscuous mode */
rte_eth_promiscuous_enable(port_id);
}
void init_port(int port_id)
{
struct rte_eth_dev_info dev_info;
int ret;
struct rte_eth_link link;
rte_eth_dev_info_get(port_id, &dev_info);
printf("Name:%s\n\tDriver name: %s\n\tMax rx queues: %d\n\tMax tx queues: %d\n", dev_info.pci_dev->driver->name,dev_info.driver_name, dev_info.max_rx_queues, dev_info.max_tx_queues);
printf("\tPCI Adress: %04d:%02d:%02x:%01d\n", dev_info.pci_dev->addr.domain, dev_info.pci_dev->addr.bus, dev_info.pci_dev->addr.devid, dev_info.pci_dev->addr.function);
ret = rte_eth_dev_configure(port_id, 1, 1, &port_conf);
if (ret < 0)
rte_panic("Error configuring the port\n");
ret = rte_eth_rx_queue_setup(port_id, 0, RX_QUEUE_SZ, rte_socket_id(), &rx_conf, pktmbuf_pool);
if (ret < 0)
FATAL_ERROR("Error configuring receiving queue= %d\n", ret);
// TODO: Need to check whether it is supported in the VMXNET
/*ret = rte_eth_dev_set_rx_queue_stats_mapping(port_id, 0, 0);
if (ret < 0)
FATAL_ERROR("Error configuring receiving queue stats= %d [ENOTSUP= %d]\n", ret, ENOTSUP); */
ret = rte_eth_tx_queue_setup(port_id, 0, TX_QUEUE_SZ, rte_socket_id(), &tx_conf);
if (ret < 0)
FATAL_ERROR("Error configuring transmitting queue. Errno: %d (%d bad arg, %d no mem)\n", -ret, EINVAL ,ENOMEM);
/* Start device */
ret = rte_eth_dev_start(port_id);
if (ret < 0)
FATAL_ERROR("Cannot start port\n");
/* Enable receipt in promiscuous mode for an Ethernet device */
//rte_eth_promiscuous_enable(port_id);
/* Print link status */
rte_eth_link_get_nowait(port_id, &link);
if (link.link_status)
printf("\tPort %d Link Up - speed %u Mbps - %s\n", (uint8_t)port_id, (unsigned)link.link_speed,(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?("full-duplex") : ("half-duplex\n"));
else
printf("\tPort %d Link Down\n",(uint8_t)port_id);
}
int
rumpcomp_virtif_create(int devnum, struct virtif_user **viup)
{
struct rte_eth_conf portconf;
struct rte_eth_link link;
int rv = EINVAL; /* XXX: not very accurate ;) */
/* this is here only for simplicity */
if (globalinit() != 0)
goto out;
memset(&portconf, 0, sizeof(portconf));
if (rte_eth_dev_configure(IF_PORTID, NQUEUE, NQUEUE, &portconf) < 0)
OUT("configure device\n");
if (rte_eth_rx_queue_setup(IF_PORTID, 0, NDESC, 0, &rxconf, mbpool) <0)
OUT("rx queue setup\n");
if (rte_eth_tx_queue_setup(IF_PORTID, 0, NDESC, 0, &txconf) < 0)
OUT("tx queue setup\n");
if (rte_eth_dev_start(IF_PORTID) < 0)
OUT("device start\n");
rte_eth_link_get(IF_PORTID, &link);
if (!link.link_status) {
printf("warning: virt link down\n");
}
rte_eth_promiscuous_enable(IF_PORTID);
rv = 0;
out:
*viup = NULL; /* not used by the driver in its current state */
return rv;
}
static void
app_init_nics(void)
{
unsigned socket;
uint32_t lcore;
uint16_t port;
uint8_t queue;
int ret;
uint32_t n_rx_queues, n_tx_queues;
/* Init NIC ports and queues, then start the ports */
for (port = 0; port < APP_MAX_NIC_PORTS; port ++) {
struct rte_mempool *pool;
uint16_t nic_rx_ring_size;
uint16_t nic_tx_ring_size;
struct rte_eth_rxconf rxq_conf;
struct rte_eth_txconf txq_conf;
struct rte_eth_dev_info dev_info;
struct rte_eth_conf local_port_conf = port_conf;
n_rx_queues = app_get_nic_rx_queues_per_port(port);
n_tx_queues = app.nic_tx_port_mask[port];
if ((n_rx_queues == 0) && (n_tx_queues == 0)) {
continue;
}
/* Init port */
printf("Initializing NIC port %u ...\n", port);
rte_eth_dev_info_get(port, &dev_info);
if (dev_info.tx_offload_capa & DEV_TX_OFFLOAD_MBUF_FAST_FREE)
local_port_conf.txmode.offloads |=
DEV_TX_OFFLOAD_MBUF_FAST_FREE;
local_port_conf.rx_adv_conf.rss_conf.rss_hf &=
dev_info.flow_type_rss_offloads;
if (local_port_conf.rx_adv_conf.rss_conf.rss_hf !=
port_conf.rx_adv_conf.rss_conf.rss_hf) {
printf("Port %u modified RSS hash function based on hardware support,"
"requested:%#"PRIx64" configured:%#"PRIx64"\n",
port,
port_conf.rx_adv_conf.rss_conf.rss_hf,
local_port_conf.rx_adv_conf.rss_conf.rss_hf);
}
ret = rte_eth_dev_configure(
port,
(uint8_t) n_rx_queues,
(uint8_t) n_tx_queues,
&local_port_conf);
if (ret < 0) {
rte_panic("Cannot init NIC port %u (%d)\n", port, ret);
}
rte_eth_promiscuous_enable(port);
nic_rx_ring_size = app.nic_rx_ring_size;
nic_tx_ring_size = app.nic_tx_ring_size;
ret = rte_eth_dev_adjust_nb_rx_tx_desc(
port, &nic_rx_ring_size, &nic_tx_ring_size);
if (ret < 0) {
rte_panic("Cannot adjust number of descriptors for port %u (%d)\n",
port, ret);
}
app.nic_rx_ring_size = nic_rx_ring_size;
app.nic_tx_ring_size = nic_tx_ring_size;
rxq_conf = dev_info.default_rxconf;
rxq_conf.offloads = local_port_conf.rxmode.offloads;
/* Init RX queues */
for (queue = 0; queue < APP_MAX_RX_QUEUES_PER_NIC_PORT; queue ++) {
if (app.nic_rx_queue_mask[port][queue] == 0) {
continue;
}
app_get_lcore_for_nic_rx(port, queue, &lcore);
socket = rte_lcore_to_socket_id(lcore);
pool = app.lcore_params[lcore].pool;
printf("Initializing NIC port %u RX queue %u ...\n",
port, queue);
ret = rte_eth_rx_queue_setup(
port,
queue,
(uint16_t) app.nic_rx_ring_size,
socket,
&rxq_conf,
pool);
if (ret < 0) {
rte_panic("Cannot init RX queue %u for port %u (%d)\n",
queue, port, ret);
}
}
txq_conf = dev_info.default_txconf;
txq_conf.offloads = local_port_conf.txmode.offloads;
/* Init TX queues */
if (app.nic_tx_port_mask[port] == 1) {
app_get_lcore_for_nic_tx(port, &lcore);
socket = rte_lcore_to_socket_id(lcore);
printf("Initializing NIC port %u TX queue 0 ...\n",
port);
ret = rte_eth_tx_queue_setup(
port,
0,
(uint16_t) app.nic_tx_ring_size,
socket,
&txq_conf);
if (ret < 0) {
rte_panic("Cannot init TX queue 0 for port %d (%d)\n",
port,
ret);
}
}
/* Start port */
ret = rte_eth_dev_start(port);
if (ret < 0) {
rte_panic("Cannot start port %d (%d)\n", port, ret);
}
}
check_all_ports_link_status(APP_MAX_NIC_PORTS, (~0x0));
}
/**********************************************************************
*@description:
*
*
*@parameters:
* [in]:
* [in]:
*
*@return values:
*
**********************************************************************/
static int odp_init_ports(unsigned short nb_ports, struct odp_user_config *user_conf, struct odp_lcore_config *lcore_conf)
{
int ret;
uint8_t portid;
uint16_t queueid;
unsigned lcore_id;
uint8_t nb_rx_queue =0;
uint8_t max_rx_queue =0;
uint8_t queue, socketid;
uint32_t n_tx_queue, nb_lcores, nb_mbuf;
struct ether_addr eth_addr;
struct rte_eth_dev_info dev_info;
struct rte_eth_txconf *txconf;
nb_lcores = rte_lcore_count();
n_tx_queue = nb_lcores;
if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
n_tx_queue = MAX_TX_QUEUE_PER_PORT;
printf("\nStart to Init port \n" );
/* initialize all ports */
for (portid = 0; portid < nb_ports; portid++)
{
/* skip ports that are not enabled */
if ((user_conf->port_mask & (1 << portid)) == 0)
{
printf("\nSkipping disabled port %d\n", portid);
continue;
}
/* init port */
printf("\t port %d: \n", portid );
nb_rx_queue = odp_get_port_rx_queues_nb(portid, user_conf);
if(max_rx_queue < nb_rx_queue)
max_rx_queue = nb_rx_queue;
printf("\t Creating queues: rx queue number=%d tx queue number=%u... \n", nb_rx_queue, (unsigned)n_tx_queue );
ret = rte_eth_dev_configure(portid, nb_rx_queue, (uint16_t)n_tx_queue, &odp_port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%d\n", ret, portid);
rte_eth_macaddr_get(portid, ð_addr);
printf ("\t MAC Address:%02X:%02X:%02X:%02X:%02X:%02X \n",
eth_addr.addr_bytes[0], eth_addr.addr_bytes[1],
eth_addr.addr_bytes[2], eth_addr.addr_bytes[3],
eth_addr.addr_bytes[4], eth_addr.addr_bytes[5]);
/* init one TX queue per couple (lcore,port) */
queueid = 0;
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++)
{
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
if (user_conf->numa_on)
socketid = (uint8_t)rte_lcore_to_socket_id(lcore_id);
else
socketid = 0;
printf("\t lcore id:%u, tx queue id:%d, socket id:%d \n", lcore_id, queueid, socketid);
ret = rte_eth_tx_queue_setup(portid, queueid, ODP_TX_DESC_DEFAULT, socketid, &odp_tx_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_tx_queue_setup: err=%d, " "port=%d\n", ret, portid);
lcore_conf[lcore_id].tx_queue_id[portid] = queueid;
queueid++;
}
printf("\n");
}
nb_mbuf = RTE_MAX((nb_ports*nb_rx_queue*ODP_RX_DESC_DEFAULT +
nb_ports*nb_lcores*MAX_PKT_BURST +
nb_ports*n_tx_queue*ODP_TX_DESC_DEFAULT +
nb_lcores*MEMPOOL_CACHE_SIZE), (unsigned)8192);
/* init memory */
ret = odp_init_mbuf_pool(nb_mbuf, user_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "init_mem failed\n");
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++)
{
if (rte_lcore_is_enabled(lcore_id) == 0)
continue;
printf("\nInitializing rx queues on lcore %u ... \n", lcore_id );
/* init RX queues */
for(queue = 0; queue < lcore_conf[lcore_id].n_rx_queue; ++queue)
{
portid = lcore_conf[lcore_id].rx_queue_list[queue].port_id;
queueid = lcore_conf[lcore_id].rx_queue_list[queue].queue_id;
if (user_conf->numa_on)
socketid = (uint8_t)rte_lcore_to_socket_id(lcore_id);
else
socketid = 0;
printf("port id:%d, rx queue id: %d, socket id:%d \n", portid, queueid, socketid);
ret = rte_eth_rx_queue_setup(portid, queueid, ODP_RX_DESC_DEFAULT, socketid, &odp_rx_conf, odp_pktmbuf_pool[socketid]);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_rx_queue_setup: err=%d," "port=%d\n", ret, portid);
}
}
return 0;
}
int
rte_netmap_init_port(uint8_t portid, const struct rte_netmap_port_conf *conf)
{
int32_t ret;
uint16_t i;
uint16_t rx_slots, tx_slots;
if (conf == NULL ||
portid >= RTE_DIM(ports) ||
conf->nr_tx_rings > netmap.conf.max_rings ||
conf->nr_rx_rings > netmap.conf.max_rings) {
RTE_LOG(ERR, USER1, "%s(%hhu): invalid parameters\n",
__func__, portid);
return (-EINVAL);
}
rx_slots = (uint16_t)rte_align32pow2(conf->nr_rx_slots);
tx_slots = (uint16_t)rte_align32pow2(conf->nr_tx_slots);
if (tx_slots > netmap.conf.max_slots ||
rx_slots > netmap.conf.max_slots) {
RTE_LOG(ERR, USER1, "%s(%hhu): invalid parameters\n",
__func__, portid);
return (-EINVAL);
}
ret = rte_eth_dev_configure(portid, conf->nr_rx_rings,
conf->nr_tx_rings, conf->eth_conf);
if (ret < 0) {
RTE_LOG(ERR, USER1, "Couldn't configure port %hhu\n", portid);
return (ret);
}
for (i = 0; i < conf->nr_tx_rings; i++) {
ret = rte_eth_tx_queue_setup(portid, i, tx_slots,
conf->socket_id, conf->tx_conf);
if (ret < 0) {
RTE_LOG(ERR, USER1,
"Couldn't configure TX queue %"PRIu16" of "
"port %"PRIu8"\n",
i, portid);
return (ret);
}
ret = rte_eth_rx_queue_setup(portid, i, rx_slots,
conf->socket_id, conf->rx_conf, conf->pool);
if (ret < 0) {
RTE_LOG(ERR, USER1,
"Couldn't configure RX queue %"PRIu16" of "
"port %"PRIu8"\n",
i, portid);
return (ret);
}
}
/* copy config to the private storage. */
ports[portid].eth_conf = conf->eth_conf[0];
ports[portid].rx_conf = conf->rx_conf[0];
ports[portid].tx_conf = conf->tx_conf[0];
ports[portid].pool = conf->pool;
ports[portid].socket_id = conf->socket_id;
ports[portid].nr_tx_rings = conf->nr_tx_rings;
ports[portid].nr_rx_rings = conf->nr_rx_rings;
ports[portid].nr_tx_slots = tx_slots;
ports[portid].nr_rx_slots = rx_slots;
ports[portid].tx_burst = conf->tx_burst;
ports[portid].rx_burst = conf->rx_burst;
return (0);
}
int32_t interfaceSetup(void)
{
uint8_t portIndex = 0, portCount = rte_eth_dev_count();
int32_t ret = 0, socket_id = -1;
struct rte_eth_link link;
for (portIndex = 0; portIndex < portCount; portIndex++)
{
/* fetch the socket Id to which the port the mapped */
for (ret = 0; ret < MAX_NUMANODE; ret++)
{
if (numaNodeInfo[ret].intfTotal) {
if (numaNodeInfo[ret].intfAvail & (1 << portIndex)) {
socket_id = ret;
break;
}
}
}
memset(&link, 0x00, sizeof(struct rte_eth_link));
ret = rte_eth_dev_configure(portIndex, 1, 1, &portConf);
if (unlikely(ret < 0))
{
rte_panic("ERROR: Dev Configure\n");
return -1;
}
ret = rte_eth_rx_queue_setup(portIndex, 0, RTE_TEST_RX_DESC_DEFAULT,
0, NULL, numaNodeInfo[socket_id].rx[0]);
if (unlikely(ret < 0))
{
rte_panic("ERROR: Rx Queue Setup\n");
return -2;
}
ret = rte_eth_tx_queue_setup(portIndex, 0, RTE_TEST_TX_DESC_DEFAULT,
0, NULL);
if (unlikely(ret < 0))
{
rte_panic("ERROR: Tx Queue Setup\n");
return -3;
}
rte_eth_link_get(portIndex, &link);
if (unlikely(link.link_duplex != ETH_LINK_FULL_DUPLEX)) {
printf(" port:%u; duplex:%s, status:%s",
(unsigned) portIndex,
(link.link_duplex == ETH_LINK_FULL_DUPLEX)?"Full":"half",
(link.link_status == 1)?"up":"down");
/*return -1;
Note: there is chance if interface is not connected or speed
does not match
*/
}
rte_eth_promiscuous_enable(portIndex);
rte_eth_dev_start(portIndex);
}
return 0;
}
static int dpdk_main(int port_id, int argc, char* argv[])
{
struct rte_eth_dev_info dev_info;
unsigned nb_queues;
FILE* lfile;
uint8_t core_id;
int ret;
printf("In dpdk_main\n");
// Open the log file
lfile = fopen("./vrouter.log", "w");
// Program the rte log
rte_openlog_stream(lfile);
ret = rte_eal_init(argc, argv);
if (ret < 0) {
log_crit( "Invalid EAL parameters\n");
return -1;
}
log_info( "Programming cmd rings now!\n");
rx_event_fd = (int *) malloc(sizeof(int *) * rte_lcore_count());
if (!rx_event_fd) {
log_crit("Failed to allocate memory for rx event fd arrays\n");
return -ENOMEM;
}
rte_eth_macaddr_get(port_id, &port_eth_addr);
log_info("Port%d: MAC Address: ", port_id);
print_ethaddr(&port_eth_addr);
/* Determine the number of RX/TX pairs supported by NIC */
rte_eth_dev_info_get(port_id, &dev_info);
dev_info.pci_dev->intr_handle.type = RTE_INTR_HANDLE_VFIO_MSIX;
dev_info.pci_dev->intr_handle.max_intr =
dev_info.max_rx_queues + dev_info.max_tx_queues;
ret = rte_intr_efd_enable(&dev_info.pci_dev->intr_handle,
dev_info.max_rx_queues);
if (ret < 0) {
rte_exit(EXIT_FAILURE, "Failed to enable rx interrupts\n");
}
ret = rte_intr_enable(&dev_info.pci_dev->intr_handle);
if (ret < 0) {
rte_exit(EXIT_FAILURE, "Failed to enable interrupts\n");
}
ret = rte_eth_dev_configure(port_id, dev_info.max_rx_queues,
dev_info.max_tx_queues, &port_conf);
if (ret < 0) {
rte_exit(EXIT_FAILURE, "Failed to configure ethernet device\n");
}
/* For each RX/TX pair */
nb_queues = dev_info.max_tx_queues;
for (core_id = 0; core_id < nb_queues; core_id++) {
char s[64];
if (rte_lcore_is_enabled(core_id) == 0)
continue;
/* NUMA socket number */
unsigned socketid = rte_lcore_to_socket_id(core_id);
if (socketid >= NB_SOCKETS) {
log_crit( "Socket %d of lcore %u is out of range %d\n",
socketid, core_id, NB_SOCKETS);
return -EBADF;
}
/* Create memory pool */
if (pktmbuf_pool[socketid] == NULL) {
log_info("Creating mempool on %d of ~%lx bytes\n",
socketid, NB_MBUF * MBUF_SIZE);
printf("Creating mempool on %d of ~%lx bytes\n",
socketid, NB_MBUF * MBUF_SIZE);
snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
pktmbuf_pool[socketid] = rte_mempool_create(s,
NB_MBUF,
MBUF_SIZE,
MEMPOOL_CACHE_SIZE,
PKTMBUF_PRIV_SZ,
rte_pktmbuf_pool_init,
NULL,
rte_pktmbuf_init,
NULL,
socketid,
0);
if (!pktmbuf_pool[socketid]) {
log_crit( "Cannot init mbuf pool on socket %d\n", socketid);
return -ENOMEM;
}
}
/* Setup the TX queue */
ret = rte_eth_tx_queue_setup(port_id,
core_id,
RTE_TX_DESC_DEFAULT,
socketid,
&tx_conf);
if (ret < 0) {
log_crit( "Cannot initialize TX queue (%d)\n", core_id);
return -ENODEV;
}
/* Setup the RX queue */
ret = rte_eth_rx_queue_setup(port_id,
core_id,
RTE_RX_DESC_DEFAULT,
socketid,
&rx_conf,
pktmbuf_pool[socketid]);
if (ret < 0) {
log_crit( "Cannot initialize RX queue (%d)\n", core_id);
return -ENODEV;
}
/* Create the event fds for event notification */
lcore_cmd_event_fd[core_id] = eventfd(0, 0);
}
// Start the eth device
ret = rte_eth_dev_start(port_id);
if (ret < 0) {
log_crit( "rte_eth_dev_start: err=%d, port=%d\n", ret, core_id);
return -ENODEV;
}
// Put the device in promiscuous mode
rte_eth_promiscuous_enable(port_id);
// Wait for link up
//check_all_ports_link_status(1, 1u << port_id);
log_info( "Starting engines on every core\n");
rte_eal_mp_remote_launch(engine_loop, &dev_info, CALL_MASTER);
return 0;
}
static inline int
port_init_common(uint8_t port, const struct rte_eth_conf *port_conf,
struct rte_mempool *mp)
{
const uint16_t rx_ring_size = 512, tx_ring_size = 512;
int retval;
uint16_t q;
struct rte_eth_dev_info dev_info;
if (!rte_eth_dev_is_valid_port(port))
return -1;
retval = rte_eth_dev_configure(port, 0, 0, port_conf);
rte_eth_dev_info_get(port, &dev_info);
default_params.rx_rings = RTE_MIN(dev_info.max_rx_queues,
MAX_NUM_RX_QUEUE);
default_params.tx_rings = 1;
/* Configure the Ethernet device. */
retval = rte_eth_dev_configure(port, default_params.rx_rings,
default_params.tx_rings, port_conf);
if (retval != 0)
return retval;
for (q = 0; q < default_params.rx_rings; q++) {
retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
rte_eth_dev_socket_id(port), NULL, mp);
if (retval < 0)
return retval;
}
/* Allocate and set up 1 TX queue per Ethernet port. */
for (q = 0; q < default_params.tx_rings; q++) {
retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
rte_eth_dev_socket_id(port), NULL);
if (retval < 0)
return retval;
}
/* Start the Ethernet port. */
retval = rte_eth_dev_start(port);
if (retval < 0)
return retval;
/* Display the port MAC address. */
struct ether_addr addr;
rte_eth_macaddr_get(port, &addr);
printf("Port %u MAC: %02" PRIx8 " %02" PRIx8 " %02" PRIx8
" %02" PRIx8 " %02" PRIx8 " %02" PRIx8 "\n",
(unsigned int)port,
addr.addr_bytes[0], addr.addr_bytes[1],
addr.addr_bytes[2], addr.addr_bytes[3],
addr.addr_bytes[4], addr.addr_bytes[5]);
/* Enable RX in promiscuous mode for the Ethernet device. */
rte_eth_promiscuous_enable(port);
return 0;
}
int
main(int argc, char **argv)
{
//struct lcore_queue_conf *qconf = NULL;
//struct rte_eth_dev_info dev_info;
struct lcore_env** envs;
int ret;
uint8_t n_ports;
unsigned lcore_count;
ret = rte_eal_init(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid EAL arguments\n");
argc -= ret;
argv += ret;
ret = l2sw_parse_args(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid MARIO arguments\n");
lcore_count = rte_lcore_count();
n_ports = rte_eth_dev_count();
//RTE_LOG(INFO, MARIO, "Find %u logical cores\n" , lcore_count);
mbuf_pool = rte_mempool_create("mbuf_pool", NB_MBUF, MBUF_SIZE,
32, sizeof(struct rte_pktmbuf_pool_private),
rte_pktmbuf_pool_init, NULL,
rte_pktmbuf_init, NULL,
rte_socket_id(), 0);
if (mbuf_pool == NULL)
rte_exit(EXIT_FAILURE, "Cannot init mbuf pool\n");
// init route_table
route_table = create_route_table(ROUTE_ENTRY_SIZE);
add_staticroute(route_table);
// init arp_table
arp_table = create_arp_table(ARP_ENTRY_SIZE);
n_ports = rte_eth_dev_count();
if (n_ports == 0)
rte_exit(EXIT_FAILURE, "No Ethernet ports - byte\n");
//RTE_LOG(INFO, MARIO, "Find %u ethernet ports\n", n_ports);
if (n_ports > RTE_MAX_ETHPORTS)
n_ports = RTE_MAX_ETHPORTS;
/* Each logical core is assigned a dedicated TX queue on each port. */
/*
for(uint8_t port_id = 0; port_id < n_ports; port_id++) {
rte_eth_dev_info_get(port_id, &dev_info);
}
*/
/* Initialize the port/queue configuration of each logical core */
/*
for(uint8_t port_id = 0; port_id < n_ports; port_id++) {
;
}
*/
/* Initialize lcore_env */
envs = (struct lcore_env**) rte_malloc(NULL,sizeof(struct lcore_env*),0);
if (envs == NULL)
rte_exit(EXIT_FAILURE, "Cannot allocate memory for core envs\n");
uint8_t lcore_id;
for (lcore_id = 0; lcore_id < lcore_count; lcore_id++) {
struct lcore_env* env;
env = (struct lcore_env*) rte_malloc(NULL,sizeof(struct lcore_env) +
sizeof(struct mbuf_table) *n_ports,0);
if (env == NULL)
rte_exit(EXIT_FAILURE,
"Cannot allocate memory for %u core env\n", lcore_id);
env->n_port = n_ports;
env->lcore_id = lcore_id;
memset(env->tx_mbufs, 0, sizeof(struct mbuf_table) * n_ports);
envs[lcore_id] = env;
}
/* Initialise each port */
uint8_t port_id;
for(port_id = 0; port_id < n_ports; port_id++) {
//RTE_LOG(INFO, MARIO, "Initializing port %u...", port_id);
fflush(stdout);
ret = rte_eth_dev_configure(port_id, lcore_count, lcore_count, &port_conf);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Cannot configure device: err=%d, port=%u\n",
ret, (unsigned)port_id);
//RTE_LOG(INFO, MARIO, "done\n");
rte_eth_macaddr_get(port_id, &port2eth[port_id]);
/* init one RX queue */
uint8_t core_id;
for (core_id = 0; core_id < lcore_count; core_id++) {
ret = rte_eth_rx_queue_setup(port_id, core_id, nb_rxd,
rte_eth_dev_socket_id(port_id),
NULL,
mbuf_pool);
if (ret < 0)
rte_exit(EXIT_FAILURE,
"rte_eth_rx_queue_setup:err=%d, port=%u queue=%u\n",
ret, (unsigned) port_id, (unsigned) core_id);
}
/* init one TX queue */
for (core_id = 0; core_id < lcore_count; core_id++) {
ret = rte_eth_tx_queue_setup(port_id, core_id, nb_txd,
rte_eth_dev_socket_id(port_id), NULL);
if (ret < 0)
rte_exit(EXIT_FAILURE,
"rte_eth_tx_queue_setup:err=%d, port=%u queue=%u\n",
ret, (unsigned) port_id, (unsigned) core_id);
}
/* Start device */
ret = rte_eth_dev_start(port_id);
if (ret < 0)
rte_exit(EXIT_FAILURE, "rte_eth_dev_start:err=%d, port=%u\n",
ret, (unsigned) port_id);
rte_eth_promiscuous_enable(port_id);
/*RTE_LOG(INFO, MARIO,
"Port %u, MAC address %02x:%02x:%02x:%02x:%02x:%02x\n\n",
port_id,
port2eth[port_id].addr_bytes[0],
port2eth[port_id].addr_bytes[1],
port2eth[port_id].addr_bytes[2],
port2eth[port_id].addr_bytes[3],
port2eth[port_id].addr_bytes[4],
port2eth[port_id].addr_bytes[5]);
*/
memset(&port_statistics, 0, sizeof(port_statistics));
}
check_all_ports_link_status(n_ports);
/* launch per-lcore init on every lcore */
rte_eal_mp_remote_launch(l2sw_launch_one_lcore, envs, CALL_MASTER);
{
uint8_t lcore_id;
RTE_LCORE_FOREACH_SLAVE(lcore_id) {
if (rte_eal_wait_lcore(lcore_id) < 0)
return -1;
}
}
rte_free(arp_table);
rte_free(route_table);
return 0;
}
void pktgen_config_ports(void)
{
uint32_t lid, pid, i, s, q, sid;
rxtx_t rt;
pkt_seq_t * pkt;
port_info_t * info;
char buff[RTE_MEMZONE_NAMESIZE];
int32_t ret, cache_size;
char output_buff[256] = { 0 };
// Find out the total number of ports in the system.
// We have already blacklisted the ones we needed to in main routine.
pktgen.nb_ports = rte_eth_dev_count();
if (pktgen.nb_ports > RTE_MAX_ETHPORTS)
pktgen.nb_ports = RTE_MAX_ETHPORTS;
if ( pktgen.nb_ports == 0 )
pktgen_log_panic("*** Did not find any ports to use ***");
pktgen.starting_port = 0;
// Setup the number of ports to display at a time
if ( pktgen.nb_ports > pktgen.nb_ports_per_page )
pktgen.ending_port = pktgen.starting_port + pktgen.nb_ports_per_page;
else
pktgen.ending_port = pktgen.starting_port + pktgen.nb_ports;
wr_port_matrix_dump(pktgen.l2p);
pktgen_log_info("Configuring %d ports, MBUF Size %d, MBUF Cache Size %d",
pktgen.nb_ports, MBUF_SIZE, MBUF_CACHE_SIZE);
// For each lcore setup each port that is handled by that lcore.
for(lid = 0; lid < RTE_MAX_LCORE; lid++) {
if ( wr_get_map(pktgen.l2p, RTE_MAX_ETHPORTS, lid) == 0 )
continue;
// For each port attached or handled by the lcore
for(pid = 0; pid < pktgen.nb_ports; pid++) {
// If non-zero then this port is handled by this lcore.
if ( wr_get_map(pktgen.l2p, pid, lid) == 0 )
continue;
wr_set_port_private(pktgen.l2p, pid, &pktgen.info[pid]);
pktgen.info[pid].pid = pid;
}
}
wr_dump_l2p(pktgen.l2p);
pktgen.total_mem_used = 0;
for(pid = 0; pid < pktgen.nb_ports; pid++) {
// Skip if we do not have any lcores attached to a port.
if ( (rt.rxtx = wr_get_map(pktgen.l2p, pid, RTE_MAX_LCORE)) == 0 )
continue;
pktgen.port_cnt++;
snprintf(output_buff, sizeof(output_buff),
"Initialize Port %d -- TxQ %d, RxQ %d", pid, rt.tx, rt.rx);
info = wr_get_port_private(pktgen.l2p, pid);
// Create the pkt header structures for transmitting sequence of packets.
snprintf(buff, sizeof(buff), "seq_hdr_%d", pid);
info->seq_pkt = (pkt_seq_t *)rte_zmalloc(buff, (sizeof(pkt_seq_t) * NUM_TOTAL_PKTS), RTE_CACHE_LINE_SIZE);
if ( info->seq_pkt == NULL )
pktgen_log_panic("Unable to allocate %d pkt_seq_t headers", NUM_TOTAL_PKTS);
info->seqIdx = 0;
info->seqCnt = 0;
info->nb_mbufs = MAX_MBUFS_PER_PORT;
cache_size = (info->nb_mbufs > RTE_MEMPOOL_CACHE_MAX_SIZE)?
RTE_MEMPOOL_CACHE_MAX_SIZE : info->nb_mbufs;
pktgen_port_conf_setup(pid, &rt, &default_port_conf);
if ( (ret = rte_eth_dev_configure(pid, rt.rx, rt.tx, &info->port_conf)) < 0)
pktgen_log_panic("Cannot configure device: port=%d, Num queues %d,%d (%d)%s",
pid, rt.rx, rt.tx, errno, rte_strerror(-ret));
pkt = &info->seq_pkt[SINGLE_PKT];
// Grab the source MAC addresses */
rte_eth_macaddr_get(pid, &pkt->eth_src_addr);
pktgen_log_info("%s, Src MAC %02x:%02x:%02x:%02x:%02x:%02x", output_buff,
pkt->eth_src_addr.addr_bytes[0],
pkt->eth_src_addr.addr_bytes[1],
pkt->eth_src_addr.addr_bytes[2],
pkt->eth_src_addr.addr_bytes[3],
pkt->eth_src_addr.addr_bytes[4],
pkt->eth_src_addr.addr_bytes[5]);
// Copy the first Src MAC address in SINGLE_PKT to the rest of the sequence packets.
for (i = 0; i < NUM_SEQ_PKTS; i++)
ethAddrCopy( &info->seq_pkt[i].eth_src_addr, &pkt->eth_src_addr );
pktgen.mem_used = 0;
for(q = 0; q < rt.rx; q++) {
// grab the socket id value based on the lcore being used.
sid = rte_lcore_to_socket_id(wr_get_port_lid(pktgen.l2p, pid, q));
// Create and initialize the default Receive buffers.
info->q[q].rx_mp = pktgen_mbuf_pool_create("Default RX", pid, q, info->nb_mbufs, sid, cache_size);
if ( info->q[q].rx_mp == NULL )
pktgen_log_panic("Cannot init port %d for Default RX mbufs", pid);
ret = rte_eth_rx_queue_setup(pid, q, pktgen.nb_rxd, sid, &info->rx_conf, pktgen.info[pid].q[q].rx_mp);
if (ret < 0)
pktgen_log_panic("rte_eth_rx_queue_setup: err=%d, port=%d, %s", ret, pid, rte_strerror(-ret));
}
pktgen_log_info("");
for(q = 0; q < rt.tx; q++) {
// grab the socket id value based on the lcore being used.
sid = rte_lcore_to_socket_id(wr_get_port_lid(pktgen.l2p, pid, q));
// Create and initialize the default Transmit buffers.
info->q[q].tx_mp = pktgen_mbuf_pool_create("Default TX", pid, q, MAX_MBUFS_PER_PORT, sid, cache_size);
if ( info->q[q].tx_mp == NULL )
pktgen_log_panic("Cannot init port %d for Default TX mbufs", pid);
// Create and initialize the range Transmit buffers.
info->q[q].range_mp = pktgen_mbuf_pool_create("Range TX", pid, q, MAX_MBUFS_PER_PORT, sid, 0);
if ( info->q[q].range_mp == NULL )
pktgen_log_panic("Cannot init port %d for Range TX mbufs", pid);
// Create and initialize the sequence Transmit buffers.
info->q[q].seq_mp = pktgen_mbuf_pool_create("Sequence TX", pid, q, MAX_MBUFS_PER_PORT, sid, cache_size);
if ( info->q[q].seq_mp == NULL )
pktgen_log_panic("Cannot init port %d for Sequence TX mbufs", pid);
// Used for sending special packets like ARP requests
info->q[q].special_mp = pktgen_mbuf_pool_create("Special TX", pid, q, MAX_SPECIAL_MBUFS, sid, cache_size);
if (info->q[q].special_mp == NULL)
pktgen_log_panic("Cannot init port %d for Special TX mbufs", pid);
// Setup the PCAP file for each port
if ( pktgen.info[pid].pcap != NULL ) {
if ( pktgen_pcap_parse(pktgen.info[pid].pcap, info, q) == -1 )
pktgen_log_panic("Cannot load PCAP file for port %d", pid);
}
// Find out the link speed to program the WTHRESH value correctly.
pktgen_get_link_status(info, pid, 0);
//info->tx_conf.tx_thresh.wthresh = (info->link.link_speed == 1000)? TX_WTHRESH_1GB : TX_WTHRESH;
ret = rte_eth_tx_queue_setup(pid, q, pktgen.nb_txd, sid, &info->tx_conf);
if (ret < 0)
pktgen_log_panic("rte_eth_tx_queue_setup: err=%d, port=%d, %s", ret, pid, rte_strerror(-ret));
#if 0
ret = rte_eth_dev_flow_ctrl_set(pid, &fc_conf);
if (ret < 0)
pktgen_log_panic("rte_eth_dev_flow_ctrl_set: err=%d, port=%d, %s", ret, pid, rte_strerror(-ret));
#endif
pktgen_log_info("");
}
pktgen_log_info("%*sPort memory used = %6lu KB", 71, " ", (pktgen.mem_used + 1023)/1024);
}
pktgen_log_info("%*sTotal memory used = %6lu KB", 70, " ", (pktgen.total_mem_used + 1023)/1024);
// Start up the ports and display the port Link status
for(pid = 0; pid < pktgen.nb_ports; pid++) {
if ( wr_get_map(pktgen.l2p, pid, RTE_MAX_LCORE) == 0 )
continue;
info = wr_get_port_private(pktgen.l2p, pid);
/* Start device */
if ( (ret = rte_eth_dev_start(pid)) < 0 )
pktgen_log_panic("rte_eth_dev_start: port=%d, %s", pid, rte_strerror(-ret));
pktgen_get_link_status(info, pid, 1);
if (info->link.link_status) {
snprintf(output_buff, sizeof(output_buff), "Port %2d: Link Up - speed %u Mbps - %s", pid,
(uint32_t) info->link.link_speed,
(info->link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
("full-duplex") : ("half-duplex"));
} else
snprintf(output_buff, sizeof(output_buff), "Port %2d: Link Down", pid);
// If enabled, put device in promiscuous mode.
if (pktgen.flags & PROMISCUOUS_ON_FLAG) {
strncatf(output_buff, " <Enable promiscuous mode>");
rte_eth_promiscuous_enable(pid);
}
pktgen_log_info("%s", output_buff);
pktgen.info[pid].seq_pkt[SINGLE_PKT].pktSize = MIN_PKT_SIZE;
// Setup the port and packet defaults. (must be after link speed is found)
for (s = 0; s < NUM_TOTAL_PKTS; s++)
pktgen_port_defaults(pid, s);
pktgen_range_setup(info);
pktgen_rnd_bits_init(&pktgen.info[pid].rnd_bitfields);
}
pktgen_log_info("");
for (sid = 0; sid < wr_coremap_cnt(pktgen.core_info, pktgen.core_cnt, 0); sid++)
pktgen_packet_capture_init(&pktgen.capture[sid], sid);
}
/*
* Initialises a given port using global settings and with the rx buffers
* coming from the mbuf_pool passed as parameter
*/
static inline int
port_init(uint8_t port, struct rte_mempool *mbuf_pool)
{
struct rte_eth_dev_info dev_info;
struct rte_eth_conf port_conf;
uint16_t rx_rings, tx_rings = (uint16_t)rte_lcore_count();
const uint16_t rx_ring_size = RTE_TEST_RX_DESC_DEFAULT, tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
int retval;
uint16_t q;
/* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
rte_eth_dev_info_get (port, &dev_info);
/*configure the number of supported virtio devices based on VMDQ limits */
num_devices = dev_info.max_vmdq_pools;
num_queues = dev_info.max_rx_queues;
retval = validate_num_devices(MAX_DEVICES);
if (retval < 0)
return retval;
/* Get port configuration. */
retval = get_eth_conf(&port_conf, num_devices);
if (retval < 0)
return retval;
if (port >= rte_eth_dev_count()) return -1;
rx_rings = (uint16_t)num_queues,
/* Configure ethernet device. */
retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
if (retval != 0)
return retval;
/* Setup the queues. */
for (q = 0; q < rx_rings; q ++) {
retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
rte_eth_dev_socket_id(port), &rx_conf_default,
mbuf_pool);
if (retval < 0)
return retval;
}
for (q = 0; q < tx_rings; q ++) {
retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
rte_eth_dev_socket_id(port), &tx_conf_default);
if (retval < 0)
return retval;
}
/* Start the device. */
retval = rte_eth_dev_start(port);
if (retval < 0)
return retval;
rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
RTE_LOG(INFO, VHOST_PORT, "Max virtio devices supported: %u\n", num_devices);
RTE_LOG(INFO, VHOST_PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
" %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
(unsigned)port,
vmdq_ports_eth_addr[port].addr_bytes[0],
vmdq_ports_eth_addr[port].addr_bytes[1],
vmdq_ports_eth_addr[port].addr_bytes[2],
vmdq_ports_eth_addr[port].addr_bytes[3],
vmdq_ports_eth_addr[port].addr_bytes[4],
vmdq_ports_eth_addr[port].addr_bytes[5]);
return 0;
}