static void rtl_op_bss_info_changed(struct ieee80211_hw *hw,
struct ieee80211_vif *vif,
struct ieee80211_bss_conf *bss_conf, u32 changed)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtlpriv);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
struct ieee80211_sta *sta = NULL;
mutex_lock(&rtlpriv->locks.conf_mutex);
if ((vif->type == NL80211_IFTYPE_ADHOC) ||
(vif->type == NL80211_IFTYPE_AP) ||
(vif->type == NL80211_IFTYPE_MESH_POINT)) {
if ((changed & BSS_CHANGED_BEACON) ||
(changed & BSS_CHANGED_BEACON_ENABLED &&
bss_conf->enable_beacon)) {
if (mac->beacon_enabled == 0) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
("BSS_CHANGED_BEACON_ENABLED\n"));
/*start hw beacon interrupt. */
/*rtlpriv->cfg->ops->set_bcn_reg(hw); */
mac->beacon_enabled = 1;
rtlpriv->cfg->ops->update_interrupt_mask(hw,
rtlpriv->cfg->maps
[RTL_IBSS_INT_MASKS],
0);
if (rtlpriv->cfg->ops->linked_set_reg)
rtlpriv->cfg->ops->linked_set_reg(hw);
}
}
if ((changed & BSS_CHANGED_BEACON_ENABLED &&
!bss_conf->enable_beacon)) {
if (mac->beacon_enabled == 1) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
("ADHOC DISABLE BEACON\n"));
mac->beacon_enabled = 0;
rtlpriv->cfg->ops->update_interrupt_mask(hw, 0,
rtlpriv->cfg->maps
[RTL_IBSS_INT_MASKS]);
}
}
if (changed & BSS_CHANGED_BEACON_INT) {
RT_TRACE(rtlpriv, COMP_BEACON, DBG_TRACE,
("BSS_CHANGED_BEACON_INT\n"));
mac->beacon_interval = bss_conf->beacon_int;
rtlpriv->cfg->ops->set_bcn_intv(hw);
}
}
/*TODO: reference to enum ieee80211_bss_change */
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
/* we should reset all sec info & cam
* before set cam after linked, we should not
* reset in disassoc, that will cause tkip->wep
* fail because some flag will be wrong */
/* reset sec info */
rtl_cam_reset_sec_info(hw);
/* reset cam to fix wep fail issue
* when change from wpa to wep */
rtl_cam_reset_all_entry(hw);
mac->link_state = MAC80211_LINKED;
mac->cnt_after_linked = 0;
mac->assoc_id = bss_conf->aid;
memcpy(mac->bssid, bss_conf->bssid, 6);
if (rtlpriv->cfg->ops->linked_set_reg)
rtlpriv->cfg->ops->linked_set_reg(hw);
if (mac->opmode == NL80211_IFTYPE_STATION && sta)
rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0);
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
("BSS_CHANGED_ASSOC\n"));
} else {
if (mac->link_state == MAC80211_LINKED)
rtl_lps_leave(hw);
mac->link_state = MAC80211_NOLINK;
memset(mac->bssid, 0, 6);
mac->vendor = PEER_UNKNOWN;
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
("BSS_CHANGED_UN_ASSOC\n"));
}
}
if (changed & BSS_CHANGED_ERP_CTS_PROT) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
("BSS_CHANGED_ERP_CTS_PROT\n"));
mac->use_cts_protect = bss_conf->use_cts_prot;
}
if (changed & BSS_CHANGED_ERP_PREAMBLE) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_LOUD,
("BSS_CHANGED_ERP_PREAMBLE use short preamble:%x\n",
bss_conf->use_short_preamble));
mac->short_preamble = bss_conf->use_short_preamble;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_ACK_PREAMBLE,
(u8 *) (&mac->short_preamble));
}
if (changed & BSS_CHANGED_ERP_SLOT) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
("BSS_CHANGED_ERP_SLOT\n"));
if (bss_conf->use_short_slot)
mac->slot_time = RTL_SLOT_TIME_9;
else
mac->slot_time = RTL_SLOT_TIME_20;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SLOT_TIME,
(u8 *) (&mac->slot_time));
}
if (changed & BSS_CHANGED_HT) {
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_TRACE,
("BSS_CHANGED_HT\n"));
rcu_read_lock();
sta = get_sta(hw, vif, (u8 *)bss_conf->bssid);
if (sta) {
if (sta->ht_cap.ampdu_density >
mac->current_ampdu_density)
mac->current_ampdu_density =
sta->ht_cap.ampdu_density;
if (sta->ht_cap.ampdu_factor <
mac->current_ampdu_factor)
mac->current_ampdu_factor =
sta->ht_cap.ampdu_factor;
}
rcu_read_unlock();
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SHORTGI_DENSITY,
(u8 *) (&mac->max_mss_density));
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_FACTOR,
&mac->current_ampdu_factor);
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_AMPDU_MIN_SPACE,
&mac->current_ampdu_density);
}
if (changed & BSS_CHANGED_BSSID) {
u32 basic_rates;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BSSID,
(u8 *) bss_conf->bssid);
RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG,
(MAC_FMT "\n", MAC_ARG(bss_conf->bssid)));
mac->vendor = PEER_UNKNOWN;
memcpy(mac->bssid, bss_conf->bssid, 6);
rtlpriv->cfg->ops->set_network_type(hw, vif->type);
rcu_read_lock();
sta = get_sta(hw, vif, (u8 *)bss_conf->bssid);
if (!sta) {
rcu_read_unlock();
goto out;
}
if (rtlhal->current_bandtype == BAND_ON_5G) {
mac->mode = WIRELESS_MODE_A;
} else {
if (sta->supp_rates[0] <= 0xf)
mac->mode = WIRELESS_MODE_B;
else
mac->mode = WIRELESS_MODE_G;
}
if (sta->ht_cap.ht_supported) {
if (rtlhal->current_bandtype == BAND_ON_2_4G)
mac->mode = WIRELESS_MODE_N_24G;
else
mac->mode = WIRELESS_MODE_N_5G;
}
/* just station need it, because ibss & ap mode will
* set in sta_add, and will be NULL here */
if (mac->opmode == NL80211_IFTYPE_STATION) {
struct rtl_sta_info *sta_entry;
sta_entry = (struct rtl_sta_info *) sta->drv_priv;
sta_entry->wireless_mode = mac->mode;
}
if (sta->ht_cap.ht_supported) {
mac->ht_enable = true;
/*
* for cisco 1252 bw20 it's wrong
* if (ht_cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) {
* mac->bw_40 = true;
* }
* */
}
if (changed & BSS_CHANGED_BASIC_RATES) {
/* for 5G must << RATE_6M_INDEX=4,
* because 5G have no cck rate*/
if (rtlhal->current_bandtype == BAND_ON_5G)
basic_rates = sta->supp_rates[1] << 4;
else
basic_rates = sta->supp_rates[0];
mac->basic_rates = basic_rates;
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_BASIC_RATE,
(u8 *) (&basic_rates));
}
rcu_read_unlock();
}
/*
* For FW LPS:
* To tell firmware we have connected
* to an AP. For 92SE/CE power save v2.
*/
if (changed & BSS_CHANGED_ASSOC) {
if (bss_conf->assoc) {
if (ppsc->fwctrl_lps) {
u8 mstatus = RT_MEDIA_CONNECT;
rtlpriv->cfg->ops->set_hw_reg(hw,
HW_VAR_H2C_FW_JOINBSSRPT,
(u8 *) (&mstatus));
ppsc->report_linked = true;
}
} else {
if (ppsc->fwctrl_lps) {
u8 mstatus = RT_MEDIA_DISCONNECT;
rtlpriv->cfg->ops->set_hw_reg(hw,
HW_VAR_H2C_FW_JOINBSSRPT,
(u8 *)(&mstatus));
ppsc->report_linked = false;
}
}
}
out:
mutex_unlock(&rtlpriv->locks.conf_mutex);
}
int rtl92su_hw_init(struct ieee80211_hw *hw)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
struct rtl_phy *rtlphy = &(rtlpriv->phy);
struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
int err = 0;
bool rtstatus = true;
u8 i;
int wdcapra_add[] = {
REG_EDCA_BE_PARAM, REG_EDCA_BK_PARAM,
REG_EDCA_VI_PARAM, REG_EDCA_VO_PARAM};
u8 secr_value = 0x0;
/* 1. MAC Initialize */
/* Before FW download, we have to set some MAC register */
err = _rtl92su_macconfig_before_fwdownload(hw);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"Failed to get the device ready for the firmware (%d)\n",
err);
return err;
}
rtlhal->version = (enum version_8192s)((rtl_read_dword(rtlpriv,
REG_PMC_FSM) >> 16) & 0xF);
/* 2. download firmware */
rtstatus = rtl92s_download_fw(hw);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
"Failed to download FW. Init HW without FW now... Please copy FW into /lib/firmware/rtlwifi\n");
return -ENOENT;
}
/* After FW download, we have to reset MAC register */
_rtl92su_macconfig_after_fwdownload(hw);
/*Retrieve default FW Cmd IO map. */
rtlhal->fwcmd_iomap = rtl_read_word(rtlpriv, REG_LBUS_MON_ADDR);
rtlhal->fwcmd_ioparam = rtl_read_dword(rtlpriv, REG_LBUS_ADDR_MASK);
/* 3. Initialize MAC/PHY Config by MACPHY_reg.txt */
rtstatus = rtl92s_phy_mac_config(hw);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "MAC Config failed\n");
return -EINVAL;
}
/* because last function modify RCR, so we update
* rcr var here, or TP will unstable for receive_config
* is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
* RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
*/
/* Make sure BB/RF write OK. We should prevent enter IPS. radio off. */
/* We must set flag avoid BB/RF config period later!! */
rtl_write_word(rtlpriv, CMDR, 0x37FC);
/* 4. Initialize BB After MAC Config PHY_reg.txt, AGC_Tab.txt */
rtstatus = rtl92s_phy_bb_config(hw);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, "BB Config failed\n");
return -ENODEV;
}
/* 5. Initiailze RF RAIO_A.txt RF RAIO_B.txt */
/* Before initalizing RF. We can not use FW to do RF-R/W. */
rtlphy->rf_mode = RF_OP_BY_SW_3WIRE;
/* Before RF-R/W we must execute the IO from Scott's suggestion. */
rtl_write_byte(rtlpriv, REG_AFE_XTAL_CTRL + 1, 0xDB);
if (rtlhal->version == VERSION_8192S_ACUT)
rtl_write_byte(rtlpriv, REG_SPS1_CTRL + 3, 0x07);
else
rtl_write_byte(rtlpriv, REG_RF_CTRL, 0x07);
rtstatus = rtl92s_phy_rf_config(hw);
if (!rtstatus) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, "RF Config failed\n");
return -EOPNOTSUPP;
}
/* After read predefined TXT, we must set BB/MAC/RF
* register as our requirement */
rtlphy->rfreg_chnlval[0] = rtl92s_phy_query_rf_reg(hw,
(enum radio_path)0,
RF_CHNLBW,
RFREG_OFFSET_MASK);
rtlphy->rfreg_chnlval[1] = rtl92s_phy_query_rf_reg(hw,
(enum radio_path)1,
RF_CHNLBW,
RFREG_OFFSET_MASK);
/*---- Set CCK and OFDM Block "ON"----*/
rtl_set_bbreg(hw, REG_RFPGA0_RFMOD, BCCKEN, 0x1);
rtl_set_bbreg(hw, REG_RFPGA0_RFMOD, BOFDMEN, 0x1);
/*3 Set Hardware(Do nothing now) */
_rtl92su_hw_configure(hw);
/* Read EEPROM TX power index and PHY_REG_PG.txt to capture correct */
/* TX power index for different rate set. */
/* Get original hw reg values */
rtl92s_phy_get_hw_reg_originalvalue(hw);
/* Write correct tx power index */
rtl92s_phy_set_txpower(hw, rtlphy->current_channel);
/* We must set MAC address after firmware download. */
for (i = 0; i < 6; i++)
rtl_write_byte(rtlpriv, MACIDR0 + i, rtlefuse->dev_addr[i]);
/* We enable high power and RA related mechanism after NIC
* initialized. */
if (hal_get_firmwareversion(rtlpriv) >= 0x35) {
/* Fw v.53 and later. */
rtl92s_phy_set_fw_cmd(hw, FW_CMD_RA_INIT);
} else if (hal_get_firmwareversion(rtlpriv) == 0x34) {
/* Fw v.52. */
rtl_write_dword(rtlpriv, REG_WFM5, FW_RA_INIT);
rtl92s_phy_chk_fwcmd_iodone(hw);
} else {
/* Compatible earlier FW version. */
rtl_write_dword(rtlpriv, REG_WFM5, FW_RA_RESET);
rtl92s_phy_chk_fwcmd_iodone(hw);
rtl_write_dword(rtlpriv, REG_WFM5, FW_RA_ACTIVE);
rtl92s_phy_chk_fwcmd_iodone(hw);
rtl_write_dword(rtlpriv, REG_WFM5, FW_RA_REFRESH);
rtl92s_phy_chk_fwcmd_iodone(hw);
}
/* Security related
* 1. Clear all H/W keys.
* 2. Enable H/W encryption/decryption. */
rtl_cam_reset_all_entry(hw);
secr_value |= SCR_TXENCENABLE;
secr_value |= SCR_RXENCENABLE;
secr_value |= SCR_NOSKMC;
rtl_write_byte(rtlpriv, REG_SECR, secr_value);
for (i = 0; i < 4; i++)
rtl_write_dword(rtlpriv, wdcapra_add[i], 0x5e4322);
if (rtlphy->rf_type == RF_1T2R) {
bool mrc2set = true;
/* Turn on B-Path */
rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_MRC, (u8 *)&mrc2set);
}
rtlpriv->cfg->ops->led_control(hw, LED_CTL_POWER_ON);
rtl92s_dm_init(hw);
return err;
}