/* ************************************************************************
* ************************************************************************
* I N I T
* ************************************************************************
* ************************************************************************ */
static int __init rtnetproxy_init_module(void)
{
int err;
/* Initialize the proxy's rtskb pool (JK) */
if (rtskb_pool_init(&rtskb_pool, proxy_rtskbs) < proxy_rtskbs) {
rtskb_pool_release(&rtskb_pool);
return -ENOMEM;
}
dev_rtnetproxy.init = rtnetproxy_init;
SET_MODULE_OWNER(&dev_rtnetproxy);
/* Define the name for this unit */
err=dev_alloc_name(&dev_rtnetproxy,"rtproxy");
if(err<0) {
rtskb_pool_release(&rtskb_pool);
return err;
}
err = register_netdev(&dev_rtnetproxy);
if (err<0) {
rtskb_pool_release(&rtskb_pool);
return err;
}
/* Initialize the ringbuffers: */
memset(&ring_rtskb_kernel_rtnet, 0, sizeof(ring_rtskb_kernel_rtnet));
memset(&ring_rtskb_rtnet_kernel, 0, sizeof(ring_rtskb_rtnet_kernel));
memset(&ring_skb_kernel_rtnet, 0, sizeof(ring_skb_kernel_rtnet));
memset(&ring_skb_rtnet_kernel, 0, sizeof(ring_skb_rtnet_kernel));
/* Init the task for transmission */
rtdm_sem_init(&rtnetproxy_sem, 0);
rtdm_task_init(&rtnetproxy_thread, "rtnetproxy",
rtnetproxy_transmit_thread, 0,
RTDM_TASK_LOWEST_PRIORITY, 0);
/* Register srq */
rtdm_nrtsig_init(&rtnetproxy_signal, rtnetproxy_signal_handler);
/* rtNet stuff: */
rt_ip_register_fallback(rtnetproxy_recv);
printk("rtnetproxy installed as \"%s\"\n", dev_rtnetproxy.name);
return 0;
}
/***
* rt_socket_cleanup - releases resources allocated for the socket
*/
int rt_socket_cleanup(struct rtdm_dev_context *context)
{
struct rtsocket *sock = (struct rtsocket *)&context->dev_private;
unsigned int rtskbs;
unsigned long flags;
rtos_event_sem_delete(&sock->wakeup_event);
rtos_spin_lock_irqsave(&sock->param_lock, flags);
set_bit(SKB_POOL_CLOSED, &context->context_flags);
rtskbs = atomic_read(&sock->pool_size);
rtos_spin_unlock_irqrestore(&sock->param_lock, flags);
if (rtskbs > 0) {
if (test_bit(RTDM_CREATED_IN_NRT, &context->context_flags)) {
rtskbs = rtskb_pool_shrink(&sock->skb_pool, rtskbs);
atomic_sub(rtskbs, &sock->pool_size);
if (atomic_read(&sock->pool_size) > 0)
return -EAGAIN;
rtskb_pool_release(&sock->skb_pool);
} else {
rtskbs = rtskb_pool_shrink_rt(&sock->skb_pool, rtskbs);
atomic_sub(rtskbs, &sock->pool_size);
if (atomic_read(&sock->pool_size) > 0)
return -EAGAIN;
rtskb_pool_release_rt(&sock->skb_pool);
}
}
return 0;
}
int __init rtcfg_init_frames(void)
{
int ret;
rtskb_queue_init(&rx_queue);
rtos_event_sem_init(&rx_event);
if (rtskb_pool_init(&rtcfg_pool, num_rtskbs) < num_rtskbs) {
ret = -ENOMEM;
goto error1;
}
ret = rtos_task_init(&rx_task, rtcfg_rx_task, 0,
RTOS_LOWEST_RT_PRIORITY);
if (ret < 0)
goto error1;
ret = rtdev_add_pack(&rtcfg_packet_type);
if (ret < 0)
goto error2;
return 0;
error2:
rtos_task_delete(&rx_task);
error1:
rtos_event_sem_delete(&rx_event);
rtskb_pool_release(&rtcfg_pool);
return ret;
}
static void __exit scc_enet_cleanup(void)
{
struct rtnet_device *rtdev = rtdev_root;
struct scc_enet_private *cep = (struct scc_enet_private *)rtdev->priv;
volatile cpm8xx_t *cp = cpmp;
volatile scc_enet_t *ep;
if (rtdev) {
rtdm_irq_disable(&cep->irq_handle);
rtdm_irq_free(&cep->irq_handle);
ep = (scc_enet_t *)(&cp->cp_dparam[PROFF_ENET]);
m8xx_cpm_dpfree(ep->sen_genscc.scc_rbase);
m8xx_cpm_dpfree(ep->sen_genscc.scc_tbase);
rt_stack_disconnect(rtdev);
rt_unregister_rtnetdev(rtdev);
rt_rtdev_disconnect(rtdev);
printk("%s: unloaded\n", rtdev->name);
rtskb_pool_release(&cep->skb_pool);
rtdev_free(rtdev);
rtdev_root = NULL;
}
}
int __init rtcfg_init_frames(void)
{
int ret;
if (rtskb_pool_init(&rtcfg_pool, num_rtskbs) < num_rtskbs)
return -ENOMEM;
rtskb_queue_init(&rx_queue);
rtdm_event_init(&rx_event, 0);
ret = rtdm_task_init(&rx_task, "rtcfg-rx", rtcfg_rx_task, 0,
RTDM_TASK_LOWEST_PRIORITY, 0);
if (ret < 0) {
rtdm_event_destroy(&rx_event);
goto error1;
}
ret = rtdev_add_pack(&rtcfg_packet_type);
if (ret < 0)
goto error2;
return 0;
error2:
rtdm_event_destroy(&rx_event);
rtdm_task_join_nrt(&rx_task, 100);
error1:
rtskb_pool_release(&rtcfg_pool);
return ret;
}
/***
* rt_socket_cleanup - releases resources allocated for the socket
*/
int rt_socket_cleanup(struct rtdm_dev_context *sockctx)
{
struct rtsocket *sock = (struct rtsocket *)&sockctx->dev_private;
int ret = 0;
rtdm_sem_destroy(&sock->pending_sem);
mutex_lock(&sock->pool_nrt_lock);
set_bit(SKB_POOL_CLOSED, &sockctx->context_flags);
if (sock->pool_size > 0) {
sock->pool_size -= rtskb_pool_shrink(&sock->skb_pool, sock->pool_size);
if (sock->pool_size > 0)
ret = -EAGAIN;
else
rtskb_pool_release(&sock->skb_pool);
}
mutex_unlock(&sock->pool_nrt_lock);
return ret;
}
void rtcap_cleanup(void)
{
unsigned long flags;
#if defined(CONFIG_RTAI_24) || defined(CONFIG_RTAI_30) || defined(CONFIG_RTAI_31)
if (start_timer)
stop_rt_timer();
#endif
rtos_nrt_signal_delete(&cap_signal);
/* unregister capturing handlers */
rtos_spin_lock_irqsave(&rtcap_lock, flags);
rtcap_handler = NULL;
rtos_spin_unlock_irqrestore(&rtcap_lock, flags);
/* empty queue (should be already empty) */
rtcap_signal_handler();
cleanup_tap_devices();
rtskb_pool_release(&cap_pool);
printk("RTcap: unloaded\n");
}
void rt2x00_core_remove(struct rtnet_device * rtnet_dev) {
struct rtwlan_device * rtwlan_dev = rtnetdev_priv(rtnet_dev);
rtskb_pool_release(&rtwlan_dev->skb_pool);
rt_unregister_rtnetdev(rtnet_dev);
rt_rtdev_disconnect(rtnet_dev);
rtdev_free(rtnet_dev);
}
/**
* rtnet_mgr_release(): release the RTnet-Manager
*
*/
void rtnet_release(void)
{
rt_printk("RTnet: End real-time networking\n");
rt_stack_mgr_delete(&STACK_manager);
rt_rtdev_mgr_delete(&RTDEV_manager);
#ifdef CONFIG_PROC_FS
rtnet_mgr_proc_unregister ();
#endif
rtnet_chrdev_release();
rt_inet_proto_release();
rtnet_dev_release();
rtsockets_release();
rtskb_pool_release();
cleanup_crc32();
}
static void __exit rtnetproxy_cleanup_module(void)
{
/* Unregister the fallback at rtnet */
rt_ip_register_fallback(0);
/* free the rtai srq */
rtdm_nrtsig_destroy(&rtnetproxy_signal);
rtdm_task_destroy(&rtnetproxy_thread);
rtdm_sem_destroy(&rtnetproxy_sem);
/* Free the ringbuffers... */
{
struct sk_buff *del_skb; /* standard skb */
while ((del_skb = read_from_ringbuffer(&ring_skb_rtnet_kernel)) != 0)
{
dev_kfree_skb(del_skb);
}
while ((del_skb = read_from_ringbuffer(&ring_skb_kernel_rtnet)) != 0)
{
dev_kfree_skb(del_skb);
}
}
{
struct rtskb *del; /* rtnet skb */
while ((del=read_from_ringbuffer(&ring_rtskb_kernel_rtnet))!=0)
{
kfree_rtskb(del); // Although this is kernel mode, freeing should work...
}
while ((del=read_from_ringbuffer(&ring_rtskb_rtnet_kernel))!=0)
{
kfree_rtskb(del); // Although this is kernel mode, freeing should work...
}
}
/* Unregister the net device: */
unregister_netdev(&dev_rtnetproxy);
kfree(dev_rtnetproxy.priv);
memset(&dev_rtnetproxy, 0, sizeof(dev_rtnetproxy));
dev_rtnetproxy.init = rtnetproxy_init;
rtskb_pool_release(&rtskb_pool);
}
/***
* rt_socket_cleanup - releases resources allocated for the socket
*/
void rt_socket_cleanup(struct rtdm_fd *fd)
{
struct rtsocket *sock = rtdm_fd_to_private(fd);
rtdm_sem_destroy(&sock->pending_sem);
mutex_lock(&sock->pool_nrt_lock);
set_bit(SKB_POOL_CLOSED, &sock->flags);
if (sock->pool_size > 0)
rtskb_pool_release(&sock->skb_pool);
mutex_unlock(&sock->pool_nrt_lock);
module_put(sock->owner);
}
void rtcfg_cleanup_frames(void)
{
struct rtskb *rtskb;
while (rtdev_remove_pack(&rtcfg_packet_type) == -EAGAIN) {
RTCFG_DEBUG(3, "RTcfg: waiting for protocol unregistration\n");
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(1*HZ); /* wait a second */
}
rtos_event_sem_delete(&rx_event);
rtos_task_delete(&rx_task);
while ((rtskb = rtskb_dequeue(&rx_queue)) != NULL) {
rtdev_dereference(rtskb->rtdev);
kfree_rtskb(rtskb);
}
rtskb_pool_release(&rtcfg_pool);
}
/* Initialize the CPM Ethernet on SCC. If EPPC-Bug loaded us, or performed
* some other network I/O, a whole bunch of this has already been set up.
* It is no big deal if we do it again, we just have to disable the
* transmit and receive to make sure we don't catch the CPM with some
* inconsistent control information.
*/
int __init scc_enet_init(void)
{
struct rtnet_device *rtdev = NULL;
struct scc_enet_private *cep;
int i, j, k;
unsigned char *eap, *ba;
dma_addr_t mem_addr;
bd_t *bd;
volatile cbd_t *bdp;
volatile cpm8xx_t *cp;
volatile scc_t *sccp;
volatile scc_enet_t *ep;
volatile immap_t *immap;
cp = cpmp; /* Get pointer to Communication Processor */
immap = (immap_t *)(mfspr(IMMR) & 0xFFFF0000); /* and to internal registers */
bd = (bd_t *)__res;
/* Configure the SCC parameters (this has formerly be done
* by macro definitions).
*/
switch (rtnet_scc) {
case 3:
CPM_CR_ENET = CPM_CR_CH_SCC3;
PROFF_ENET = PROFF_SCC3;
SCC_ENET = 2; /* Index, not number! */
CPMVEC_ENET = CPMVEC_SCC3;
break;
case 2:
CPM_CR_ENET = CPM_CR_CH_SCC2;
PROFF_ENET = PROFF_SCC2;
SCC_ENET = 1; /* Index, not number! */
CPMVEC_ENET = CPMVEC_SCC2;
break;
case 1:
CPM_CR_ENET = CPM_CR_CH_SCC1;
PROFF_ENET = PROFF_SCC1;
SCC_ENET = 0; /* Index, not number! */
CPMVEC_ENET = CPMVEC_SCC1;
break;
default:
printk(KERN_ERR "enet: SCC%d doesn't exit (check rtnet_scc)\n", rtnet_scc);
return -1;
}
/* Allocate some private information and create an Ethernet device instance.
*/
rtdev = rtdev_root = rt_alloc_etherdev(sizeof(struct scc_enet_private));
if (rtdev == NULL) {
printk(KERN_ERR "enet: Could not allocate ethernet device.\n");
return -1;
}
rtdev_alloc_name(rtdev, "rteth%d");
rt_rtdev_connect(rtdev, &RTDEV_manager);
RTNET_SET_MODULE_OWNER(rtdev);
rtdev->vers = RTDEV_VERS_2_0;
cep = (struct scc_enet_private *)rtdev->priv;
rtdm_lock_init(&cep->lock);
/* Get pointer to SCC area in parameter RAM.
*/
ep = (scc_enet_t *)(&cp->cp_dparam[PROFF_ENET]);
/* And another to the SCC register area.
*/
sccp = (volatile scc_t *)(&cp->cp_scc[SCC_ENET]);
cep->sccp = (scc_t *)sccp; /* Keep the pointer handy */
/* Disable receive and transmit in case EPPC-Bug started it.
*/
sccp->scc_gsmrl &= ~(SCC_GSMRL_ENR | SCC_GSMRL_ENT);
/* Cookbook style from the MPC860 manual.....
* Not all of this is necessary if EPPC-Bug has initialized
* the network.
* So far we are lucky, all board configurations use the same
* pins, or at least the same I/O Port for these functions.....
* It can't last though......
*/
#if (defined(PA_ENET_RXD) && defined(PA_ENET_TXD))
/* Configure port A pins for Txd and Rxd.
*/
immap->im_ioport.iop_papar |= (PA_ENET_RXD | PA_ENET_TXD);
immap->im_ioport.iop_padir &= ~(PA_ENET_RXD | PA_ENET_TXD);
immap->im_ioport.iop_paodr &= ~PA_ENET_TXD;
#elif (defined(PB_ENET_RXD) && defined(PB_ENET_TXD))
/* Configure port B pins for Txd and Rxd.
*/
immap->im_cpm.cp_pbpar |= (PB_ENET_RXD | PB_ENET_TXD);
immap->im_cpm.cp_pbdir &= ~(PB_ENET_RXD | PB_ENET_TXD);
immap->im_cpm.cp_pbodr &= ~PB_ENET_TXD;
#else
#error Exactly ONE pair of PA_ENET_[RT]XD, PB_ENET_[RT]XD must be defined
#endif
#if defined(PC_ENET_LBK)
/* Configure port C pins to disable External Loopback
*/
immap->im_ioport.iop_pcpar &= ~PC_ENET_LBK;
immap->im_ioport.iop_pcdir |= PC_ENET_LBK;
immap->im_ioport.iop_pcso &= ~PC_ENET_LBK;
immap->im_ioport.iop_pcdat &= ~PC_ENET_LBK; /* Disable Loopback */
#endif /* PC_ENET_LBK */
/* Configure port C pins to enable CLSN and RENA.
*/
immap->im_ioport.iop_pcpar &= ~(PC_ENET_CLSN | PC_ENET_RENA);
immap->im_ioport.iop_pcdir &= ~(PC_ENET_CLSN | PC_ENET_RENA);
immap->im_ioport.iop_pcso |= (PC_ENET_CLSN | PC_ENET_RENA);
/* Configure port A for TCLK and RCLK.
*/
immap->im_ioport.iop_papar |= (PA_ENET_TCLK | PA_ENET_RCLK);
immap->im_ioport.iop_padir &= ~(PA_ENET_TCLK | PA_ENET_RCLK);
/* Configure Serial Interface clock routing.
* First, clear all SCC bits to zero, then set the ones we want.
*/
cp->cp_sicr &= ~SICR_ENET_MASK;
cp->cp_sicr |= SICR_ENET_CLKRT;
/* Manual says set SDDR, but I can't find anything with that
* name. I think it is a misprint, and should be SDCR. This
* has already been set by the communication processor initialization.
*/
/* Allocate space for the buffer descriptors in the DP ram.
* These are relative offsets in the DP ram address space.
* Initialize base addresses for the buffer descriptors.
*/
i = m8xx_cpm_dpalloc(sizeof(cbd_t) * RX_RING_SIZE);
ep->sen_genscc.scc_rbase = i;
cep->rx_bd_base = (cbd_t *)&cp->cp_dpmem[i];
i = m8xx_cpm_dpalloc(sizeof(cbd_t) * TX_RING_SIZE);
ep->sen_genscc.scc_tbase = i;
cep->tx_bd_base = (cbd_t *)&cp->cp_dpmem[i];
cep->dirty_tx = cep->cur_tx = cep->tx_bd_base;
cep->cur_rx = cep->rx_bd_base;
/* Issue init Rx BD command for SCC.
* Manual says to perform an Init Rx parameters here. We have
* to perform both Rx and Tx because the SCC may have been
* already running.
* In addition, we have to do it later because we don't yet have
* all of the BD control/status set properly.
cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_RX) | CPM_CR_FLG;
while (cp->cp_cpcr & CPM_CR_FLG);
*/
/* Initialize function code registers for big-endian.
*/
ep->sen_genscc.scc_rfcr = SCC_EB;
ep->sen_genscc.scc_tfcr = SCC_EB;
/* Set maximum bytes per receive buffer.
* This appears to be an Ethernet frame size, not the buffer
* fragment size. It must be a multiple of four.
*/
ep->sen_genscc.scc_mrblr = PKT_MAXBLR_SIZE;
/* Set CRC preset and mask.
*/
ep->sen_cpres = 0xffffffff;
ep->sen_cmask = 0xdebb20e3;
ep->sen_crcec = 0; /* CRC Error counter */
ep->sen_alec = 0; /* alignment error counter */
ep->sen_disfc = 0; /* discard frame counter */
ep->sen_pads = 0x8888; /* Tx short frame pad character */
ep->sen_retlim = 15; /* Retry limit threshold */
ep->sen_maxflr = PKT_MAXBUF_SIZE; /* maximum frame length register */
ep->sen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */
ep->sen_maxd1 = PKT_MAXBLR_SIZE; /* maximum DMA1 length */
ep->sen_maxd2 = PKT_MAXBLR_SIZE; /* maximum DMA2 length */
/* Clear hash tables.
*/
ep->sen_gaddr1 = 0;
ep->sen_gaddr2 = 0;
ep->sen_gaddr3 = 0;
ep->sen_gaddr4 = 0;
ep->sen_iaddr1 = 0;
ep->sen_iaddr2 = 0;
ep->sen_iaddr3 = 0;
ep->sen_iaddr4 = 0;
/* Set Ethernet station address.
*/
eap = (unsigned char *)&(ep->sen_paddrh);
#ifdef CONFIG_FEC_ENET
/* We need a second MAC address if FEC is used by Linux */
for (i=5; i>=0; i--)
*eap++ = rtdev->dev_addr[i] = (bd->bi_enetaddr[i] |
(i==3 ? 0x80 : 0));
#else
for (i=5; i>=0; i--)
*eap++ = rtdev->dev_addr[i] = bd->bi_enetaddr[i];
#endif
ep->sen_pper = 0; /* 'cause the book says so */
ep->sen_taddrl = 0; /* temp address (LSB) */
ep->sen_taddrm = 0;
ep->sen_taddrh = 0; /* temp address (MSB) */
/* Now allocate the host memory pages and initialize the
* buffer descriptors.
*/
bdp = cep->tx_bd_base;
for (i=0; i<TX_RING_SIZE; i++) {
/* Initialize the BD for every fragment in the page.
*/
bdp->cbd_sc = 0;
bdp->cbd_bufaddr = 0;
bdp++;
}
/* Set the last buffer to wrap.
*/
bdp--;
bdp->cbd_sc |= BD_SC_WRAP;
bdp = cep->rx_bd_base;
k = 0;
for (i=0; i<CPM_ENET_RX_PAGES; i++) {
/* Allocate a page.
*/
ba = (unsigned char *)consistent_alloc(GFP_KERNEL, PAGE_SIZE, &mem_addr);
/* Initialize the BD for every fragment in the page.
*/
for (j=0; j<CPM_ENET_RX_FRPPG; j++) {
bdp->cbd_sc = BD_ENET_RX_EMPTY | BD_ENET_RX_INTR;
bdp->cbd_bufaddr = mem_addr;
cep->rx_vaddr[k++] = ba;
mem_addr += CPM_ENET_RX_FRSIZE;
ba += CPM_ENET_RX_FRSIZE;
bdp++;
}
}
/* Set the last buffer to wrap.
*/
bdp--;
bdp->cbd_sc |= BD_SC_WRAP;
/* Let's re-initialize the channel now. We have to do it later
* than the manual describes because we have just now finished
* the BD initialization.
*/
cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET, CPM_CR_INIT_TRX) | CPM_CR_FLG;
while (cp->cp_cpcr & CPM_CR_FLG);
cep->skb_cur = cep->skb_dirty = 0;
sccp->scc_scce = 0xffff; /* Clear any pending events */
/* Enable interrupts for transmit error, complete frame
* received, and any transmit buffer we have also set the
* interrupt flag.
*/
sccp->scc_sccm = (SCCE_ENET_TXE | SCCE_ENET_RXF | SCCE_ENET_TXB);
/* Install our interrupt handler.
*/
rtdev->irq = CPM_IRQ_OFFSET + CPMVEC_ENET;
rt_stack_connect(rtdev, &STACK_manager);
if ((i = rtdm_irq_request(&cep->irq_handle, rtdev->irq,
scc_enet_interrupt, 0, "rt_mpc8xx_enet", rtdev))) {
printk(KERN_ERR "Couldn't request IRQ %d\n", rtdev->irq);
rtdev_free(rtdev);
return i;
}
/* Set GSMR_H to enable all normal operating modes.
* Set GSMR_L to enable Ethernet to MC68160.
*/
sccp->scc_gsmrh = 0;
sccp->scc_gsmrl = (SCC_GSMRL_TCI | SCC_GSMRL_TPL_48 | SCC_GSMRL_TPP_10 | SCC_GSMRL_MODE_ENET);
/* Set sync/delimiters.
*/
sccp->scc_dsr = 0xd555;
/* Set processing mode. Use Ethernet CRC, catch broadcast, and
* start frame search 22 bit times after RENA.
*/
sccp->scc_pmsr = (SCC_PMSR_ENCRC | SCC_PMSR_NIB22);
/* It is now OK to enable the Ethernet transmitter.
* Unfortunately, there are board implementation differences here.
*/
#if (!defined (PB_ENET_TENA) && defined (PC_ENET_TENA))
immap->im_ioport.iop_pcpar |= PC_ENET_TENA;
immap->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
#elif ( defined (PB_ENET_TENA) && !defined (PC_ENET_TENA))
cp->cp_pbpar |= PB_ENET_TENA;
cp->cp_pbdir |= PB_ENET_TENA;
#else
#error Configuration Error: define exactly ONE of PB_ENET_TENA, PC_ENET_TENA
#endif
#if defined(CONFIG_RPXLITE) || defined(CONFIG_RPXCLASSIC)
/* And while we are here, set the configuration to enable ethernet.
*/
*((volatile uint *)RPX_CSR_ADDR) &= ~BCSR0_ETHLPBK;
*((volatile uint *)RPX_CSR_ADDR) |=
(BCSR0_ETHEN | BCSR0_COLTESTDIS | BCSR0_FULLDPLXDIS);
#endif
#ifdef CONFIG_BSEIP
/* BSE uses port B and C for PHY control.
*/
cp->cp_pbpar &= ~(PB_BSE_POWERUP | PB_BSE_FDXDIS);
cp->cp_pbdir |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
cp->cp_pbdat |= (PB_BSE_POWERUP | PB_BSE_FDXDIS);
immap->im_ioport.iop_pcpar &= ~PC_BSE_LOOPBACK;
immap->im_ioport.iop_pcdir |= PC_BSE_LOOPBACK;
immap->im_ioport.iop_pcso &= ~PC_BSE_LOOPBACK;
immap->im_ioport.iop_pcdat &= ~PC_BSE_LOOPBACK;
#endif
#ifdef CONFIG_FADS
cp->cp_pbpar |= PB_ENET_TENA;
cp->cp_pbdir |= PB_ENET_TENA;
/* Enable the EEST PHY.
*/
*((volatile uint *)BCSR1) &= ~BCSR1_ETHEN;
#endif
rtdev->base_addr = (unsigned long)ep;
/* The CPM Ethernet specific entries in the device structure. */
rtdev->open = scc_enet_open;
rtdev->hard_start_xmit = scc_enet_start_xmit;
rtdev->stop = scc_enet_close;
rtdev->hard_header = &rt_eth_header;
rtdev->get_stats = scc_enet_get_stats;
if (!rx_pool_size)
rx_pool_size = RX_RING_SIZE * 2;
if (rtskb_pool_init(&cep->skb_pool, rx_pool_size) < rx_pool_size) {
rtdm_irq_disable(&cep->irq_handle);
rtdm_irq_free(&cep->irq_handle);
rtskb_pool_release(&cep->skb_pool);
rtdev_free(rtdev);
return -ENOMEM;
}
if ((i = rt_register_rtnetdev(rtdev))) {
printk(KERN_ERR "Couldn't register rtdev\n");
rtdm_irq_disable(&cep->irq_handle);
rtdm_irq_free(&cep->irq_handle);
rtskb_pool_release(&cep->skb_pool);
rtdev_free(rtdev);
return i;
}
/* And last, enable the transmit and receive processing.
*/
sccp->scc_gsmrl |= (SCC_GSMRL_ENR | SCC_GSMRL_ENT);
printk("%s: CPM ENET Version 0.2 on SCC%d, irq %d, addr %02x:%02x:%02x:%02x:%02x:%02x\n",
rtdev->name, SCC_ENET+1, rtdev->irq,
rtdev->dev_addr[0], rtdev->dev_addr[1], rtdev->dev_addr[2],
rtdev->dev_addr[3], rtdev->dev_addr[4], rtdev->dev_addr[5]);
return 0;
}
int __init rtcap_init(void)
{
struct rtnet_device *rtdev;
struct net_device *dev;
int ret;
int devices = 0;
int i;
unsigned long flags;
printk("RTcap: real-time capturing interface\n");
#if defined(CONFIG_RTAI_24) || defined(CONFIG_RTAI_30) || defined(CONFIG_RTAI_31)
if (start_timer) {
rt_set_oneshot_mode();
start_rt_timer(0);
}
#endif
rtskb_queue_init(&cap_queue);
ret = rtos_nrt_signal_init(&cap_signal, rtcap_signal_handler);
if (ret < 0)
goto error1;
for (i = 0; i < MAX_RT_DEVICES; i++) {
tap_device[i].present = 0;
rtdev = rtdev_get_by_index(i);
if (rtdev != NULL) {
down(&rtdev->nrt_sem);
if (test_bit(PRIV_FLAG_UP, &rtdev->priv_flags)) {
up(&rtdev->nrt_sem);
printk("RTcap: %s busy, skipping device!\n", rtdev->name);
rtdev_dereference(rtdev);
continue;
}
if (rtdev->mac_priv != NULL) {
up(&rtdev->nrt_sem);
printk("RTcap: RTmac discipline already active on device %s. "
"Load RTcap before RTmac!\n", rtdev->name);
rtdev_dereference(rtdev);
continue;
}
memset(&tap_device[i].tap_dev_stats, 0,
sizeof(struct net_device_stats));
dev = &tap_device[i].tap_dev;
memset(dev, 0, sizeof(struct net_device));
dev->init = tap_dev_init;
dev->priv = rtdev;
strncpy(dev->name, rtdev->name, IFNAMSIZ-1);
dev->name[IFNAMSIZ-1] = 0;
ret = register_netdev(dev);
if (ret < 0) {
up(&rtdev->nrt_sem);
rtdev_dereference(rtdev);
printk("RTcap: unable to register %s!\n", dev->name);
goto error2;
}
tap_device[i].present = TAP_DEV;
tap_device[i].orig_xmit = rtdev->hard_start_xmit;
if ((rtdev->flags & IFF_LOOPBACK) == 0) {
dev = &tap_device[i].rtmac_tap_dev;
memset(dev, 0, sizeof(struct net_device));
dev->init = tap_dev_init;
dev->priv = rtdev;
strncpy(dev->name, rtdev->name, IFNAMSIZ-1);
dev->name[IFNAMSIZ-1] = 0;
strncat(dev->name, "-mac", IFNAMSIZ-strlen(dev->name));
ret = register_netdev(dev);
if (ret < 0) {
up(&rtdev->nrt_sem);
rtdev_dereference(rtdev);
printk("RTcap: unable to register %s!\n", dev->name);
goto error2;
}
tap_device[i].present |= RTMAC_TAP_DEV;
rtdev->hard_start_xmit = rtcap_xmit_hook;
} else
rtdev->hard_start_xmit = rtcap_loopback_xmit_hook;
/* If the device requires no xmit_lock, start_xmit points equals
* hard_start_xmit => we have to update this as well
*/
if (rtdev->features & RTNETIF_F_NON_EXCLUSIVE_XMIT)
rtdev->start_xmit = rtdev->hard_start_xmit;
tap_device[i].present |= XMIT_HOOK;
__MOD_INC_USE_COUNT(rtdev->owner);
up(&rtdev->nrt_sem);
devices++;
}
}
if (devices == 0) {
printk("RTcap: no real-time devices found!\n");
ret = -ENODEV;
goto error2;
}
if (rtskb_pool_init(&cap_pool, rtcap_rtskbs * devices) <
rtcap_rtskbs * devices) {
rtskb_pool_release(&cap_pool);
ret = -ENOMEM;
goto error2;
}
/* register capturing handlers with RTnet core */
rtos_spin_lock_irqsave(&rtcap_lock, flags);
rtcap_handler = rtcap_rx_hook;
rtos_spin_unlock_irqrestore(&rtcap_lock, flags);
return 0;
error2:
cleanup_tap_devices();
rtos_nrt_signal_delete(&cap_signal);
error1:
#if defined(CONFIG_RTAI_24) || defined(CONFIG_RTAI_30) || defined(CONFIG_RTAI_31)
if (start_timer)
stop_rt_timer();
#endif
return ret;
}
struct rtnet_device * rt2x00_core_probe(struct _rt2x00_dev_handler * handler,
void * priv,
u32 sizeof_dev) {
struct rtnet_device * rtnet_dev = NULL;
struct _rt2x00_core * core = NULL;
struct rtwlan_device * rtwlan_dev = NULL;
static int cards_found = -1;
int err;
DEBUG("Start.\n");
cards_found++;
if (cards[cards_found] == 0)
goto exit;
rtnet_dev = rtwlan_alloc_dev(sizeof_dev + sizeof(*core));
if(!rtnet_dev)
goto exit;
rt_rtdev_connect(rtnet_dev, &RTDEV_manager);
RTNET_SET_MODULE_OWNER(rtnet_dev);
rtnet_dev->vers = RTDEV_VERS_2_0;
rtwlan_dev = rtnetdev_priv(rtnet_dev);
memset(rtwlan_dev, 0x00, sizeof(*rtwlan_dev));
core = rtwlan_priv(rtwlan_dev);
memset(core, 0x00, sizeof(*core));
core->rtwlan_dev = rtwlan_dev;
core->handler = handler;
core->priv = (void*)core + sizeof(*core);
core->rtnet_dev = rtnet_dev;
if (rtskb_pool_init(&core->rtwlan_dev->skb_pool, RX_ENTRIES*2) < RX_ENTRIES*2) {
rtskb_pool_release(&core->rtwlan_dev->skb_pool);
ERROR("rtskb_pool_init failed.\n");
goto exit;
}
/* Set configuration default values. */
rt2x00_init_config(core);
if(core->handler->dev_probe
&& core->handler->dev_probe(core, priv)){
ERROR("device probe failed.\n");
goto exit;
}
INFO("Device " MAC_FMT " detected.\n", MAC_ARG(rtnet_dev->dev_addr));
rtwlan_dev->hard_start_xmit = rt2x00_start_xmit;
rtnet_dev->open = &rt2x00_open;
rtnet_dev->stop = &rt2x00_close;
rtnet_dev->do_ioctl = &rt2x00_ioctl;
rtnet_dev->hard_header = &rt_eth_header;
if ((err = rt_register_rtnetdev(rtnet_dev)) != 0) {
rtdev_free(rtnet_dev);
ERROR("rtnet_device registration failed.\n");
printk("err=%d\n", err);
goto exit_dev_remove;
}
set_bit(DEVICE_AWAKE, &core->flags);
return rtnet_dev;
exit_dev_remove:
if(core->handler->dev_remove)
core->handler->dev_remove(core);
exit:
return NULL;
}
