C++ (Cpp) rtw_hal_reset_security_engine примеры использования

Пример #1

Файл: hal_intf.c Проект: jhartma/rtl8723bs

uint	 rtw_hal_init(_adapter *padapter) 
{
	uint	status = _SUCCESS;
	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
	int i;

	status = padapter->HalFunc.hal_init(padapter);

	if(status == _SUCCESS){

		rtw_hal_init_opmode(padapter);

		for (i = 0; i<dvobj->iface_nums; i++)
			dvobj->padapters[i]->hw_init_completed = true;
			
		if (padapter->registrypriv.notch_filter == 1)
			rtw_hal_notch_filter(padapter, 1);

		rtw_hal_reset_security_engine(padapter);

		for (i = 0; i<dvobj->iface_nums; i++)
			rtw_sec_restore_wep_key(dvobj->padapters[i]);

		rtw_led_control(padapter, LED_CTL_POWER_ON);

		init_hw_mlme_ext(padapter);
		
		rtw_bb_rf_gain_offset(padapter);
	}
	else{
		for (i = 0; i<dvobj->iface_nums; i++)
			dvobj->padapters[i]->hw_init_completed = false;
		DBG_871X("rtw_hal_init: hal__init fail\n");
	}

	RT_TRACE(_module_hal_init_c_,_drv_err_,("-rtl871x_hal_init:status=0x%x\n",status));

	return status;

}	

Пример #2

Файл: hal_intf.c Проект: austinmarton/rtl8812au_linux

uint	 rtw_hal_init(_adapter *padapter) 
{
	uint	status = _SUCCESS;
	struct dvobj_priv *dvobj = adapter_to_dvobj(padapter);
	int i;

#ifdef CONFIG_DUALMAC_CONCURRENT
	if(padapter->hw_init_completed == _TRUE)
	{
		DBG_871X("rtw_hal_init: hw_init_completed == _TRUE\n");
		return status;
	}

	// before init mac0, driver must init mac1 first to avoid usb rx error.
	if((padapter->pbuddy_adapter != NULL) && (padapter->DualMacConcurrent == _TRUE)
		&& (padapter->adapter_type == PRIMARY_ADAPTER))
	{
		if(padapter->pbuddy_adapter->hw_init_completed == _TRUE)
		{
			DBG_871X("rtw_hal_init: pbuddy_adapter hw_init_completed == _TRUE\n");
		}
		else
		{
			status = 	padapter->HalFunc.hal_init(padapter->pbuddy_adapter);
			if(status == _SUCCESS){
				padapter->pbuddy_adapter->hw_init_completed = _TRUE;
			}
			else{
			 	padapter->pbuddy_adapter->hw_init_completed = _FALSE;
				RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail(pbuddy_adapter)\n"));
				DBG_871X("rtw_hal_init: hal__init fail(pbuddy_adapter)\n");
				return status;
			}
		}
	}
#endif

	status = padapter->HalFunc.hal_init(padapter);

	if(status == _SUCCESS){

		rtw_hal_init_opmode(padapter);

		for (i = 0; i<dvobj->iface_nums; i++) {
			padapter = dvobj->padapters[i];
			padapter->hw_init_completed = _TRUE;
		}
			
		if (padapter->registrypriv.notch_filter == 1)
			rtw_hal_notch_filter(padapter, 1);

		rtw_hal_reset_security_engine(padapter);
		rtw_sec_restore_wep_key(padapter);

		rtw_led_control(padapter, LED_CTL_POWER_ON);

		init_hw_mlme_ext(padapter);
	}
	else{
		for (i = 0; i<dvobj->iface_nums; i++) {
			padapter = dvobj->padapters[i];
			padapter->hw_init_completed = _FALSE;
		}
		DBG_871X("rtw_hal_init: hal__init fail\n");
	}

	RT_TRACE(_module_hal_init_c_,_drv_err_,("-rtl871x_hal_init:status=0x%x\n",status));

	return status;

}	

Пример #3

Файл: hal_intf.c Проект: 32743069/amlogic_common_3050

uint	 rtw_hal_init(_adapter *padapter) 
{
	uint	status = _SUCCESS;

	if(padapter->hw_init_completed == _TRUE)
	{
		DBG_871X("rtw_hal_init: hw_init_completed == _TRUE\n");
		return status;
	}
#ifdef CONFIG_DEINIT_BEFORE_INIT
	status = padapter->HalFunc.hal_deinit(padapter);
	if(status != _SUCCESS){
		DBG_871X("rtw_hal_init: hal_deinit before hal_init FAIL !!\n");
		return status;
	}
#endif
	
#ifdef CONFIG_DUALMAC_CONCURRENT
	// before init mac0, driver must init mac1 first to avoid usb rx error.
	if((padapter->pbuddy_adapter != NULL) && (padapter->DualMacConcurrent == _TRUE)
		&& (padapter->adapter_type == PRIMARY_ADAPTER))
	{
		if(padapter->pbuddy_adapter->hw_init_completed == _TRUE)
		{
			DBG_871X("rtw_hal_init: pbuddy_adapter hw_init_completed == _TRUE\n");
		}
		else
		{
#ifdef CONFIG_DEINIT_BEFORE_INIT
			status = padapter->HalFunc.hal_deinit(padapter->pbuddy_adapter);
			if(status != _SUCCESS){
				DBG_871X("rtw_hal_init: hal_deinit before hal_init FAIL !!(pbuddy_adapter)\n");
				return status;
			}
#endif
			status = 	padapter->HalFunc.hal_init(padapter->pbuddy_adapter);
			if(status == _SUCCESS){
				padapter->pbuddy_adapter->hw_init_completed = _TRUE;
			}
			else{
			 	padapter->pbuddy_adapter->hw_init_completed = _FALSE;
				RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail(pbuddy_adapter)\n"));
				return status;
			}
		}
	}
#else
	if(adapter_to_dvobj(padapter)->NumInterfaces == 2 && padapter->registrypriv.mac_phy_mode != 1)
	{
		if(padapter->pbuddy_adapter->hw_init_completed == _FALSE)
		{
#ifdef CONFIG_DEINIT_BEFORE_INIT
			status = padapter->HalFunc.hal_deinit(padapter->pbuddy_adapter);
			if(status != _SUCCESS){
				DBG_871X("rtw_hal_init: hal_deinit before hal_init FAIL !!(pbuddy_adapter)\n");
				return status;
			}
#endif
			status = padapter->HalFunc.hal_init(padapter->pbuddy_adapter);
			if(status == _SUCCESS){
				padapter->pbuddy_adapter->hw_init_completed = _TRUE;
			}
			else{
				padapter->pbuddy_adapter->hw_init_completed = _FALSE;
				RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail for another interface\n"));
			}
		}
	}
#endif

	padapter->hw_init_completed=_FALSE;

	status = padapter->HalFunc.hal_init(padapter);

	if(status == _SUCCESS){
		padapter->hw_init_completed = _TRUE;
		
		if (padapter->registrypriv.notch_filter == 1)
			rtw_hal_notch_filter(padapter, 1);
		
		rtw_hal_reset_security_engine(padapter);
	}
	else{
	 	padapter->hw_init_completed = _FALSE;
		RT_TRACE(_module_hal_init_c_,_drv_err_,("rtw_hal_init: hal__init fail\n"));
	}

	RT_TRACE(_module_hal_init_c_,_drv_err_,("-rtl871x_hal_init:status=0x%x\n",status));

	return status;

}