C++ (Cpp) s3c_fimc2_set_platdata примеры использования

Пример #1

0

Показать файл

Файл: mx_camera.c Проект: Abioy/meizu-mx-kernel

static int  __init mx_init_camera(void)
{
#ifdef CONFIG_VIDEO_M6MO
	if (machine_is_m030())
		i2c_devs7[0].irq = M030_GPIO_CAMERA0_EINT;
#endif

	s3c_i2c7_set_platdata(NULL);
	i2c_register_board_info(7, i2c_devs7, ARRAY_SIZE(i2c_devs7));
	
#ifdef CONFIG_VIDEO_FIMC
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(NULL);
	s3c_fimc2_set_platdata(NULL);
	s3c_fimc3_set_platdata(NULL);
#ifndef CONFIG_PM_GENERIC_DOMAINS
	s3c_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
#endif
#endif	

#ifdef CONFIG_VIDEO_FIMC_MIPI
	s3c_csis0_set_platdata(NULL);
#ifndef CONFIG_PM_GENERIC_DOMAINS
	s3c_device_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
#endif
#endif

	return 0;
}

Пример #2

0

Показать файл

static void __init smdk6442_machine_init(void)
{
//	s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info;

	smdk6442_smc911x_set();

#ifdef CONFIG_FB_S3C_AMS320
	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
#endif
	s3cfb_set_platdata(NULL);

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
  i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
	i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));

	s3c_ts_set_platdata(&s3c_ts_platform);
	s3c_adc_set_platdata(&s3c_adc_platform);

	/* fb */
//	s3cfb_set_platdata(&fb_data);

	platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices));

	s5p6442_pm_init();

	smdk_backlight_register();

#if defined(CONFIG_MMC_SDHCI_S3C)
        s3c_sdhci_set_platdata();
#endif

	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(&fimc_plat);
	smdk6442_cam0_power(1);
	smdk6442_cam1_power(1);
	
}

Пример #3

0

Показать файл

Файл: mach-universal.c Проект: wrjght/kernel-for-odroid

static void __init universal_machine_init(void)
{
	int err;

	tl2796_gpio_setup();

	universal_i2c_gpio_init();

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
	i2c_register_board_info(I2C_GPIO_26V_BUS, i2c_gpio_26v_devs,
				ARRAY_SIZE(i2c_gpio_26v_devs));
	i2c_register_board_info(I2C_GPIO_HDMI_BUS, i2c_gpio_hdmi_devs,
				ARRAY_SIZE(i2c_gpio_hdmi_devs));
	i2c_register_board_info(I2C_GPIO_28V_BUS, i2c_gpio_28v_devs,
				ARRAY_SIZE(i2c_gpio_28v_devs));

	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
	s3cfb_set_platdata(&fb_data);

	err = camera_pin_request();
	if (err)
		printk(KERN_INFO "CAMERA PIN REQUEST FAILED\n");

	/* Registering external camera to platform data */
	/*fimc_setting.camera[0] = &camera_a;*/
	fimc_setting.camera[0] = &camera_c;

	s3c_fimc0_set_platdata(&fimc_setting);
	s3c_fimc1_set_platdata(&fimc_setting);
	s3c_fimc2_set_platdata(&fimc_setting);	/* testing MIPI */
	
	/* CSI-2 */
	s3c_csis_set_platdata(NULL);

	s3c_fimc_reset_camera();
	platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
}

Пример #4

0

Показать файл

static void __init smdkc100_machine_init(void)
{
    s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info;
    s3c_device_onenand.dev.platform_data = &s3c_onenand_data;

    smdkc100_smc911x_set();

    s3c_ts_set_platdata(&s3c_ts_platform);
    s3c_adc_set_platdata(&s3c_adc_platform);

    /* i2c */
    s3c_i2c0_set_platdata(NULL);
    s3c_i2c1_set_platdata(NULL);
    i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
    i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

    /* fimc */
    s3c_fimc0_set_platdata(&fimc_plat);
    s3c_fimc1_set_platdata(&fimc_plat);
    s3c_fimc2_set_platdata(&fimc_plat);
    s3c_csis_set_platdata(NULL);
    smdkc100_reset_camera();

    /* fb */
#ifdef CONFIG_FB_S3C
    s3cfb_set_platdata(&fb_data);

#endif
    platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));

#if defined(CONFIG_PM)
    s5pc1xx_pm_init();
#endif
    smdk_backlight_register();

}

Пример #5

0

Показать файл

Файл: mach-hkdkc110.c Проект: dalinaum/studyak

static void __init smdkv210_machine_init(void)
{
	/* Find out S5PC110 chip version */
	_hw_version_check();

#ifdef CONFIG_ANDROID_PMEM
	android_pmem_set_platdata();
#endif
	/* i2c */
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
	i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));

#if defined(CONFIG_HKDKC110_BOARD) && defined(CONFIG_INPUT_YAMAHA_SENSORS) && !defined(CONFIG_INPUT_BMA150_SENSOR)
	// i2c-gpio sda/scl set pull-up yas529,bma150,ish1000
	gpio_request(GPIO_SENSORS_SDA, "GPB2");
	s3c_gpio_setpull(GPIO_SENSORS_SDA, S3C_GPIO_PULL_UP);
	gpio_direction_input(GPIO_SENSORS_SDA);
	gpio_free(GPIO_SENSORS_SDA);

	gpio_request(GPIO_SENSORS_SCL, "GPB2");
	s3c_gpio_setpull(GPIO_SENSORS_SCL, S3C_GPIO_PULL_UP);
	gpio_direction_input(GPIO_SENSORS_SCL);
	gpio_free(GPIO_SENSORS_SCL);

	// BMA150 CS PIN --> HIGH
	gpio_request(S5PV210_GPB(1), "GPB2");
	s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_NONE);
	gpio_direction_output(S5PV210_GPB(1), 1);
	gpio_free(S5PV210_GPB(1));

	i2c_register_board_info(4, i2c_devs4, ARRAY_SIZE(i2c_devs4));
#endif

	/* to support system shut down */
	pm_power_off = smdkv210_power_off;

#ifdef CONFIG_FB_S3C_LP101WH1
	s3cfb_set_platdata(&lp101wh1_data);
#endif

#ifdef CONFIG_FB_S3C_LMS350DF
	s3cfb_set_platdata(&lms350df_data);
#endif

#if defined(CONFIG_PM)
	s3c_pm_init();
#endif
#ifdef CONFIG_VIDEO_FIMC
	/* fimc */
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(&fimc_plat);
#endif
	/* 5V */
	hkdkc110_5V_power(1);

#ifdef CONFIG_VIDEO_MFC50
	/* mfc */
	s3c_mfc_set_platdata(NULL);
#endif

#ifdef CONFIG_VIDEO_TV20
	s3c_set_qos();
#endif

#ifdef CONFIG_S3C_DEV_HSMMC
	s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
	s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
	s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
	s3c_sdhci_set_platdata();
#endif
	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
#if defined(CONFIG_HAVE_PWM)
	smdk_backlight_register();
#endif
}

Пример #6

0

Показать файл

static void __init smdkc100_machine_init(void)
{
	/* spi */
#ifdef CONFIG_SPI_S3C64XX
	u32 val;

	val = __raw_readl(S5PC1XX_GPBCON);
	val &= ~(0xf<<12);
	val |= (0x1<<12);
	__raw_writel(val, S5PC1XX_GPBCON);

	val = __raw_readl(S5PC1XX_GPBPUD);
	val &= ~(0x3<<6);
	val |= (0x2<<6);
	__raw_writel(val, S5PC1XX_GPBPUD);

	s3c64xx_spi_set_info(BUSNUM(0), S5PC1XX_SPI_SRCCLK_PCLK,
			 ARRAY_SIZE(smdk_spi0_csi));

	spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
#endif

        s3c_device_nand.dev.platform_data = &s3c_nand_mtd_part_info;
	s3c_device_onenand.dev.platform_data = &s3c_onenand_data;

	//smdkc100_smc911x_set();

	s3c_ts_set_platdata(&s3c_ts_platform);
	s3c_adc_set_platdata(&s3c_adc_platform);

	/* i2c */
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

	/* pb206x i2c */
	pb206x_i2c_add_bus(0, 100);
	pb206x_i2c_add_bus(1, 100);
	pb206x_i2c_add_bus(2, 100);
	pb206x_i2c_add_bus(3, 100);
	pb206x_i2c_add_bus(4, 100);
	//pb206x_i2c_add_bus(5, 100);

	/* i2c client */
	pp876ax_i2c_client_init();

	/* fimc */
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(&fimc_plat);
	s3c_csis_set_platdata(NULL);

	/* fb */
#ifdef CONFIG_FB_S3C
	s3cfb_set_platdata(NULL);
#endif
	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));

#if defined(CONFIG_PM)
	s5pc1xx_pm_init();
#endif
        smdk_backlight_register();

#if defined(CONFIG_MMC_SDHCI_S3C)
	s3c_sdhci_set_platdata();
#endif

	smdkc100_reset_camera();
}

Пример #7

0

Показать файл

Файл: mach-smdkv210.c Проект: Bonsai-Project/bonsai_android_kernel

static void __init smdkv210_machine_init(void)
{
	/* Find out S5PC110 chip version */
	_hw_version_check();

	/* OneNAND */
#ifdef CONFIG_MTD_ONENAND
	//s3c_device_onenand.dev.platform_data = &s5p_onenand_data;
#endif

#ifdef CONFIG_DM9000
	smdkv210_dm9000_set();
#endif

#ifdef CONFIG_ANDROID_PMEM
	android_pmem_set_platdata();
#endif
	/* i2c */
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
	i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));

#ifdef CONFIG_FB_S3C
	s3cfb_set_platdata(NULL);
#endif

#if defined(CONFIG_BLK_DEV_IDE_S3C)
	s3c_ide_set_platdata(&smdkv210_ide_pdata);
#endif

#if defined(CONFIG_TOUCHSCREEN_S3C)
	s3c_ts_set_platdata(&s3c_ts_platform);
#endif

#if defined(CONFIG_S5PV210_ADCTS)
	s3c_adcts_set_platdata(&s3c_adcts_cfgs);
#endif

#if defined(CONFIG_PM)
	s3c_pm_init();
#endif
#ifdef CONFIG_VIDEO_FIMC
	/* fimc */
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(&fimc_plat);
	s3c_csis_set_platdata(NULL);
	smdkv210_cam0_power(1);
	smdkv210_cam1_power(1);
	smdkv210_mipi_cam_reset();
#endif

#ifdef CONFIG_VIDEO_MFC50
	/* mfc */
	s3c_mfc_set_platdata(NULL);
#endif

#ifdef CONFIG_S3C_DEV_HSMMC
	s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
	s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
	s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
	s5pv210_default_sdhci3();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
	s3c_sdhci_set_platdata();
#endif
	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
}

Пример #8

0

Показать файл

Файл: mach-smdkv210.c Проект: uplusplus/ls300_smdkc110

static void __init smdkv210_machine_init(void)
{
	/* Find out S5PC110 chip version */
	_hw_version_check();

	/* OneNAND */
#ifdef CONFIG_MTD_ONENAND
	//s3c_device_onenand.dev.platform_data = &s5p_onenand_data;
#endif
#ifdef CONFIG_MTD_NAND
	//s3c_device_nand.dev.platform_data = &s5p_nand_data;
#endif

#ifdef CONFIG_DM9000
	smdkv210_dm9000_set();
#endif

#ifdef CONFIG_ANDROID_PMEM
	android_pmem_set_platdata();
#endif
	/* i2c */
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
	i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));

	/* to support system shut down */
	pm_power_off = smdkv210_power_off;
#if defined(CONFIG_SPI_CNTRLR_0)
        s3cspi_set_slaves(BUSNUM(0), ARRAY_SIZE(s3c_slv_pdata_0), s3c_slv_pdata_0);
#endif
#if defined(CONFIG_SPI_CNTRLR_1)
        s3cspi_set_slaves(BUSNUM(1), ARRAY_SIZE(s3c_slv_pdata_1), s3c_slv_pdata_1);
#endif
#if defined(CONFIG_SPI_CNTRLR_2)
        s3cspi_set_slaves(BUSNUM(2), ARRAY_SIZE(s3c_slv_pdata_2), s3c_slv_pdata_2);
#endif
        spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));

#ifdef CONFIG_FB_S3C_LTE480WV
	s3cfb_set_platdata(&lte480wv_fb_data);
#endif

#if defined(CONFIG_BLK_DEV_IDE_S3C)
	s3c_ide_set_platdata(&smdkv210_ide_pdata);
#endif

#if defined(CONFIG_TOUCHSCREEN_S3C)
	s3c_ts_set_platdata(&s3c_ts_platform);
#endif

#if defined(CONFIG_S5PV210_ADC)
	s3c_adc_set_platdata(&s3c_adc_platform);
#endif

#if defined(CONFIG_PM)
	s3c_pm_init();
#endif
#ifdef CONFIG_VIDEO_FIMC
	/* fimc */
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(&fimc_plat);
	s3c_csis_set_platdata(NULL);
	smdkv210_cam0_power(1);
	smdkv210_cam1_power(1);
	smdkv210_mipi_cam_reset();
#endif

#ifdef CONFIG_VIDEO_MFC50
	/* mfc */
	s3c_mfc_set_platdata(NULL);
#endif

#ifdef CONFIG_VIDEO_TV20
	s3c_set_qos();
#endif

#ifdef CONFIG_S3C_DEV_HSMMC
	s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
	s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
	s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
	s5pv210_default_sdhci3();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
	s3c_sdhci_set_platdata();
#endif
	platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices));
#if defined(CONFIG_HAVE_PWM)
	smdk_backlight_register();
#endif
}

Пример #9

0

Показать файл

Файл: mach-p1p2.c Проект: Byst/StupidFast

static void __init smdkc110_machine_init(void)
{
	/* i2c */
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	s3c_i2c3_set_platdata(NULL);
	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));

        /* spi */
#if defined(CONFIG_SPI_CNTRLR_0)
        s3cspi_set_slaves(BUSNUM(0), ARRAY_SIZE(s3c_slv_pdata_0), s3c_slv_pdata_0);
#endif
#if defined(CONFIG_SPI_CNTRLR_1)
        s3cspi_set_slaves(BUSNUM(1), ARRAY_SIZE(s3c_slv_pdata_1), s3c_slv_pdata_1);
#endif
#if defined(CONFIG_SPI_CNTRLR_2)
        s3cspi_set_slaves(BUSNUM(2), ARRAY_SIZE(s3c_slv_pdata_2), s3c_slv_pdata_2);
#endif
        spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));

	universal_wm8994_init();
	universal_sdhci2_set_platdata();



#ifdef CONFIG_FB_S3C_LVDS
	s3cfb_set_platdata(&lvds_data);
#endif
	/* pmem */	
#ifdef CONFIG_ANDROID_PMEM
	android_pmem_set_platdata();	
#endif
	/* fimc */
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(&fimc_plat);

	s3c_csis_set_platdata(NULL);
	smdkc110_cam0_power(1);
	smdkc110_cam1_power(1);
	smdkc110_mipi_cam_power(1);

	/* ipc */
	s3c_ipc_set_platdata(NULL);
	
	platform_add_devices(smdkc110_devices, ARRAY_SIZE(smdkc110_devices));

#if defined(CONFIG_PM)
	s5pc11x_pm_init();
#endif

#if defined(CONFIG_HAVE_PWM)
	smdk_backlight_register();
#endif

	s3c_gpio_cfgpin( AP_I2C_SCL_28V, 1 );
	s3c_gpio_setpull( AP_I2C_SCL_28V, S3C_GPIO_PULL_UP); 
	s3c_gpio_cfgpin( AP_I2C_SDA_28V, 1 );
	s3c_gpio_setpull( AP_I2C_SDA_28V, S3C_GPIO_PULL_UP); 

	sec_class = class_create(THIS_MODULE, "sec");

}

Пример #10

0

Показать файл

Файл: mach-mango210.c Проект: Asure/Dropad-kernel-2.6.32.9

static void __init mango210_machine_init(void)
{
	/* Find out S5PC110 chip version */
	_hw_version_check();

#ifdef CONFIG_MTD_NAND
//	s3c_device_nand.dev.platform_data = &s5p_nand_data;
#endif

#ifdef CONFIG_SMSC911X
	mango210_smsc911x_set();
#endif

#ifdef CONFIG_ANDROID_PMEM
	android_pmem_set_platdata();
#endif
	/* i2c */
	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
	i2c_register_board_info(2, i2c_devs2, ARRAY_SIZE(i2c_devs2));

	/* to support system shut down */
	pm_power_off = mango210_power_off;

#if defined(CONFIG_SPI_CNTRLR_0)
        s3cspi_set_slaves(BUSNUM(0), ARRAY_SIZE(s3c_slv_pdata_0), s3c_slv_pdata_0);
#endif
#if defined(CONFIG_SPI_CNTRLR_1)
        s3cspi_set_slaves(BUSNUM(1), ARRAY_SIZE(s3c_slv_pdata_1), s3c_slv_pdata_1);
#endif
#if defined(CONFIG_SPI_CNTRLR_2)
        s3cspi_set_slaves(BUSNUM(2), ARRAY_SIZE(s3c_slv_pdata_2), s3c_slv_pdata_2);
#endif
        spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));

#if defined(CONFIG_FB_S3C_LB070WV6) || defined(CONFIG_FB_S3C_LTN101NT05)
	s3cfb_set_platdata(&mango_fb_data);
#endif

#if defined(CONFIG_TOUCHSCREEN_S3C)
	s3c_ts_set_platdata(&s3c_ts_platform);
#endif

#if defined(CONFIG_S5PV210_ADC)
	s3c_adc_set_platdata(&s3c_adc_platform);
#endif

#if defined(CONFIG_PM)
	s3c_pm_init();
#endif

#ifdef CONFIG_VIDEO_FIMC
#ifdef CONFIG_S5PV210_SETUP_FIMC0
	s3c_fimc0_set_platdata(&fimc_plat);
#endif
#ifdef CONFIG_S5PV210_SETUP_FIMC1
	s3c_fimc1_set_platdata(&fimc_plat);
#endif
#ifdef CONFIG_S5PV210_SETUP_FIMC2
	s3c_fimc2_set_platdata(&fimc_plat);
#endif

	mango210_camera_set();
	mango210_cam0_power(1);
#else
#ifdef CONFIG_S5PV210_SETUP_FIMC0
	s3c_fimc0_set_platdata(NULL);
#endif
#ifdef CONFIG_S5PV210_SETUP_FIMC1
	s3c_fimc1_set_platdata(NULL);
#endif
#ifdef CONFIG_S5PV210_SETUP_FIMC2
	s3c_fimc2_set_platdata(NULL);
#endif
#endif

#ifdef CONFIG_SMSC911X
	mango210_smsc911x_set();
#endif

#ifdef CONFIG_VIDEO_MFC50
	/* mfc */
	s3c_mfc_set_platdata(NULL);
#endif

#ifdef CONFIG_VIDEO_TV20
	s3c_set_qos();
#endif

#ifdef CONFIG_S3C_DEV_HSMMC
	s5pv210_default_sdhci0();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
	s5pv210_default_sdhci1();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
	s5pv210_default_sdhci2();
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
	s5pv210_default_sdhci3();
#endif
#ifdef CONFIG_S5PV210_SETUP_SDHCI
	s3c_sdhci_set_platdata();
#endif
	platform_add_devices(mango210_devices, ARRAY_SIZE(mango210_devices));
	
#if defined(CONFIG_HAVE_PWM)
	mango_backlight_register();
#endif

#ifdef CONFIG_USB_SUPPORT
	mango210_usb_host_set();
#endif
}

Пример #11

0

Показать файл

Файл: mach-smdk4210.c Проект: MaxLustig/android_kernel_samsung_galaxys2

static void __init smdk4210_machine_init(void)
{
	c1_config_gpio_table();
	c1_config_sleep_gpio_table();
	
	s3c_pm_init();
	
	s3c_gpio_cfgpin(GPIO_WLAN_EN, S3C_GPIO_OUTPUT);
	s3c_gpio_setpull(GPIO_WLAN_EN, S3C_GPIO_PULL_NONE);
	
	exynos4_pd_enable(&exynos4_device_pd[PD_MFC].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_G3D].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_LCD0].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_LCD1].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_CAM].dev);
	exynos4_pd_enable(&exynos4_device_pd[PD_TV].dev);
	
	/* SROMC Setup */
	/* TODO: Move me to a separate function */
	/*u32 tmp;

	tmp = __raw_readl(S5P_SROM_BW);
	tmp &= ~(0xffff);
	tmp |= (0x9999);
	__raw_writel(tmp, S5P_SROM_BW);

	__raw_writel(0xff1ffff1, S5P_SROM_BC1);

	tmp = __raw_readl(S5P_VA_GPIO + 0x120);
	tmp &= ~(0xffffff);
	tmp |= (0x221121);
	__raw_writel(tmp, (S5P_VA_GPIO + 0x120));

	__raw_writel(0x22222222, (S5P_VA_GPIO + 0x180));
	__raw_writel(0x22222222, (S5P_VA_GPIO + 0x1a0));
	__raw_writel(0x22222222, (S5P_VA_GPIO + 0x1c0));
	__raw_writel(0x22222222, (S5P_VA_GPIO + 0x1e0));	*/
	
	/* MMC Card init */
	s3c_gpio_cfgpin(GPIO_MASSMEM_EN, S3C_GPIO_OUTPUT);
	gpio_set_value(GPIO_MASSMEM_EN, GPIO_MASSMEM_EN_LEVEL);
	
	/* 400 kHz for initialization of MMC Card  */
	__raw_writel((__raw_readl(S5P_CLKDIV_FSYS3) & 0xfffffff0)
		     | 0x9, S5P_CLKDIV_FSYS3);
	__raw_writel((__raw_readl(S5P_CLKDIV_FSYS2) & 0xfff0fff0)
		     | 0x80008, S5P_CLKDIV_FSYS2);
	__raw_writel((__raw_readl(S5P_CLKDIV_FSYS1) & 0xfff0fff0)
		     | 0x90009, S5P_CLKDIV_FSYS1);

	/* PLATDATA init */
	s3c_i2c0_set_platdata(NULL);
	/*i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0))*/

	s3c_i2c1_set_platdata(NULL);
	/*i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));*/
	
	smdk4210_init_tsp();
	s3c_i2c3_set_platdata(&i2c3_data);
	i2c_register_board_info(3, i2c_devs3, ARRAY_SIZE(i2c_devs3)); /* TSP */
	
	smdk4210_init_pmic();
	s3c_i2c5_set_platdata(NULL);
	i2c_register_board_info(5, i2c_devs5, ARRAY_SIZE(i2c_devs5));
	
	s3c_i2c6_set_platdata(NULL);
	//i2c_register_board_info(6, i2c_devs6, ARRAY_SIZE(i2c_devs6));

	/*s3c_i2c7_set_platdata(NULL);											TVOUT
	i2c_register_board_info(7, i2c_devs7, ARRAY_SIZE(i2c_devs7));*/
	
	smdk4210_init_touchkey();
	i2c_register_board_info(9, i2c_gpio_gauge_devs, ARRAY_SIZE(i2c_gpio_gauge_devs));
	
	s3cfb_set_platdata(NULL);
	s3c_device_fb.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
	
	s3c_sdhci2_set_platdata(&smdk4210_hsmmc2_pdata);
	s3c_sdhci0_set_platdata(&smdk4210_hsmmc0_pdata);
	s3c_sdhci3_set_platdata(&smdk4210_hsmmc3_pdata);
	s3c_mshci_set_platdata(&smdk4210_mshc_pdata);

	
	s5p_fimg2d_set_platdata(&fimg2d_data);
	s5p_device_fimg2d.dev.parent = &exynos4_device_pd[PD_LCD0].dev;
	
	/* fimc */
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(&fimc_plat);

#if 0 /* TVOUT - Will nebkat hax? */
	s5p_hdmi_hpd_set_platdata(&hdmi_hpd_data);
	s5p_hdmi_cec_set_platdata(&hdmi_cec_data);
	s5p_device_tvout.dev.parent = &exynos4_device_pd[PD_TV].dev;
#endif
	

	smdk4210_otg_init();
	smdk4210_ohci_init();
	clk_xusbxti.rate = 24000000;
	smdk4210_init_battery_gauge();
	smdk4210_ehci_init();
	
	platform_add_devices(smdk4210_devices, ARRAY_SIZE(smdk4210_devices));

	samsung_bl_set(&smdk4210_bl_gpio_info, &smdk4210_bl_data);
	/*smdk4210_bt_setup();*/
}

Пример #12

0

Показать файл

static void __init mini210_machine_init(void)
{
	arm_pm_restart = smdkc110_pm_restart;

	s3c_pm_init();

	mini210_wifi_init();
#ifdef CONFIG_DM9000
	mini210_dm9000_init();
#endif

	platform_add_devices(mini210_devices, ARRAY_SIZE(mini210_devices));

#ifdef CONFIG_ANDROID_PMEM
	android_pmem_set_platdata();
#endif

#ifdef CONFIG_KEYBOARD_SAMSUNG
	samsung_keypad_set_platdata(&mini210_keypad_data);
#endif
#ifdef CONFIG_TOUCHSCREEN_S3C2410
	s3c24xx_ts_set_platdata(&s3c_ts_platform);
#endif

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
#ifdef CONFIG_TOUCHSCREEN_GOODIX
	if (mini210_get_ctp() == CTP_GT80X) {
		i2c2_data.frequency = 260*1000;
	}
#endif
	s3c_i2c2_set_platdata(&i2c2_data);
	i2c_register_board_info(0, mini210_i2c_devs0,
			ARRAY_SIZE(mini210_i2c_devs0));
	i2c_register_board_info(1, mini210_i2c_devs1,
			ARRAY_SIZE(mini210_i2c_devs1));
	i2c_register_board_info(2, mini210_i2c_devs2,
			ARRAY_SIZE(mini210_i2c_devs2));
#ifdef CONFIG_TOUCHSCREEN_EGALAX
	i2c_register_board_info(5, i2c_devs5, ARRAY_SIZE(i2c_devs5));
#endif

#ifdef CONFIG_S5PV210_SETUP_IDE
	s3c_ide_set_platdata(&mini210_ide_pdata);
#endif

#ifdef CONFIG_FB_S3C_MINI210
	{
		struct s3cfb_lcd *mlcd = mini210_get_lcd();
		if (!(mlcd->args & 0x0f)) {
			if (readl(S5PV210_GPF0_BASE + 0x184) & 0x10)
				mlcd->args |= (1 << 7);
		}
		mini210_fb_data.lcd = mlcd;
		s3c_fb_set_platdata(&mini210_fb_data);
	}
#endif

#ifdef CONFIG_S3C_DEV_HSMMC
	s3c_sdhci0_set_platdata(&mini210_hsmmc0_pdata);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC1
	s3c_sdhci1_set_platdata(&mini210_hsmmc1_pdata);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC2
	s3c_sdhci2_set_platdata(&mini210_hsmmc2_pdata);
#endif
#ifdef CONFIG_S3C_DEV_HSMMC3
	s3c_sdhci3_set_platdata(&mini210_hsmmc3_pdata);
#endif

#ifdef CONFIG_VIDEO_FIMC
	/* fimc */
	s3c_fimc0_set_platdata(&fimc_plat_lsi);
	s3c_fimc1_set_platdata(&fimc_plat_lsi);
	s3c_fimc2_set_platdata(&fimc_plat_lsi);
#ifdef CONFIG_VIDEO_S5K4BA
#ifdef CAM_ITU_CH_A
	smdkv210_cam0_power(1);
#else
	smdkv210_cam1_power(1);
#endif
#endif
#endif

#ifdef CONFIG_VIDEO_FIMC_MIPI
	s3c_csis_set_platdata(NULL);
#endif

#ifdef CONFIG_VIDEO_JPEG_V2
	s3c_jpeg_set_platdata(&jpeg_plat);
#endif
#ifdef CONFIG_VIDEO_MFC50
	/* mfc */
	s3c_mfc_set_platdata(NULL);
#endif

	/* spi */
#ifdef CONFIG_SPI_S3C64XX
	if (!gpio_request(S5PV210_GPB(1), "SPI_CS0")) {
		gpio_direction_output(S5PV210_GPB(1), 1);
		s3c_gpio_cfgpin(S5PV210_GPB(1), S3C_GPIO_SFN(1));
		s3c_gpio_setpull(S5PV210_GPB(1), S3C_GPIO_PULL_UP);
		s5pv210_spi_set_info(0, S5PV210_SPI_SRCCLK_PCLK,
				ARRAY_SIZE(smdk_spi0_csi));
	}
	if (!gpio_request(S5PV210_GPB(5), "SPI_CS1")) {
		gpio_direction_output(S5PV210_GPB(5), 1);
		s3c_gpio_cfgpin(S5PV210_GPB(5), S3C_GPIO_SFN(1));
		s3c_gpio_setpull(S5PV210_GPB(5), S3C_GPIO_PULL_UP);
		s5pv210_spi_set_info(1, S5PV210_SPI_SRCCLK_PCLK,
				ARRAY_SIZE(smdk_spi1_csi));
	}
	spi_register_board_info(s3c_spi_devs, ARRAY_SIZE(s3c_spi_devs));
#endif

	mini210_otg_init();
	mini210_ehci_init();
	mini210_ohci_init();
	clk_xusbxti.rate = 24000000;

	regulator_has_full_constraints();

	mini210_setup_clocks();

	/* write something into the INFORM6 register that we can use to
	 * differentiate an unclear reboot from a clean reboot (which
	 * writes a small integer code to INFORM6).
	 */
	__raw_writel(0xee, S5P_INFORM6);
}

Пример #13

0

Показать файл

Файл: naples-camera.c Проект: 0x7678/SJKernel-gn2

void __init midas_camera_init(void)
{
#ifdef CONFIG_VIDEO_FIMC
	s3c_fimc0_set_platdata(&fimc_plat);
	s3c_fimc1_set_platdata(&fimc_plat);
	s3c_fimc2_set_platdata(NULL);
	s3c_fimc3_set_platdata(NULL);
#ifdef CONFIG_EXYNOS_DEV_PD
	s3c_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev;
#endif
#ifdef CONFIG_VIDEO_FIMC_MIPI
	s3c_csis0_set_platdata(NULL);
	s3c_csis1_set_platdata(NULL);
#ifdef CONFIG_EXYNOS_DEV_PD
	s3c_device_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev;
	s3c_device_csis1.dev.parent = &exynos4_device_pd[PD_CAM].dev;
#endif
#endif
#endif /* CONFIG_VIDEO_FIMC */

	camera_class = class_create(THIS_MODULE, "camera");

	if (!s5k4ecgx_dev) {
		s5k4ecgx_dev = device_create(camera_class,
				NULL, 0, NULL, "rear");
		if (IS_ERR(s5k4ecgx_dev)) {
			pr_err("s5k4ecgx_dev : failed to create device!\n");
		} else {
			if (device_create_file(s5k4ecgx_dev,
				&dev_attr_rear_flash) < 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_rear_flash.attr.name);
			}
			if (device_create_file(s5k4ecgx_dev,
				&dev_attr_rear_camtype)
					< 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_rear_camtype.attr.name);
			}
			if (device_create_file(s5k4ecgx_dev,
				&dev_attr_rear_camfw) < 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_rear_camfw.attr.name);
			}
		}
	}
	if (!db8131m_dev) {
		db8131m_dev = device_create(camera_class,
				NULL, 0, NULL, "front");
		if (IS_ERR(db8131m_dev)) {
			pr_err("db8131m_dev : failed to create device!\n");
		} else {
			if (device_create_file(db8131m_dev,
				&dev_attr_front_camtype)
					< 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_front_camtype.attr.name);
			}
			if (device_create_file(db8131m_dev,
				&dev_attr_front_camfw) < 0) {
				pr_err("failed to create device file, %s\n",
					dev_attr_front_camfw.attr.name);
			}
		}
	}
}

Пример #14

0

Показать файл

Файл: mach-mid.c Проект: jeqx/android_kernel_samsung_smdkv210

static void __init mid_machine_init(void) {

	s3c_pm_init();
	sound_init();
	mid_audio_jack_init();
	mid_dm9000_init();

	platform_add_devices(mid_devices, ARRAY_SIZE(mid_devices));

	pm_power_off = mid_power_off;
	arm_pm_restart = mid_pm_restart;

	// Read configuration
	mid_init_cfg();
	mid_gpio_init();

	// Setup devices
	mid_detect_lcd();
	mid_detect_camera();
	mid_detect_i2cdevs();

#ifdef CONFIG_ANDROID_PMEM
	android_pmem_set_platdata();
#endif

	s3c_adc_set_platdata(&s3c_adc_platform);
	s3c_nand_set_platdata(&mid_nand_info);
	s3c_ts_set_platdata(&s3c_ts_platform);

	s3c_i2c0_set_platdata(NULL);
	s3c_i2c1_set_platdata(NULL);
	s3c_i2c2_set_platdata(NULL);
	i2c_register_board_info(0, mid_i2c_devs0,
			ARRAY_SIZE(mid_i2c_devs0));
	i2c_register_board_info(1, mid_i2c_devs1,
			ARRAY_SIZE(mid_i2c_devs1));
	i2c_register_board_info(2, mid_i2c_devs2,
			ARRAY_SIZE(mid_i2c_devs2));

	s3c_fb_set_platdata(&mid_fb_data);

	s3c_ehci_set_platdata(&mid_ehci_pdata);

#ifdef CONFIG_S3C_DEV_HSMMC
	s3c_sdhci0_set_platdata(&s5pv210_hsmmc0_pdata);
	s3c_sdhci1_set_platdata(&s5pv210_hsmmc1_pdata);
#endif

#ifdef CONFIG_VIDEO_FIMC
    /* fimc */
	s3c_fimc0_set_platdata(&fimc_plat_lsi);
	s3c_fimc1_set_platdata(&fimc_plat_lsi);
	s3c_fimc2_set_platdata(&fimc_plat_lsi);
#endif
#ifdef CONFIG_VIDEO_FIMC_MIPI
	s3c_csis_set_platdata(NULL);
#endif

#ifdef CONFIG_VIDEO_JPEG_V2
	s3c_jpeg_set_platdata(&jpeg_plat);
#endif
#ifdef CONFIG_VIDEO_MFC50
	 /* mfc */
	s3c_mfc_set_platdata(NULL);
#endif
#ifdef CONFIG_MFD_MAX8998
	regulator_has_full_constraints();
#endif
	mid_usbhost_setpower(1);
}