static inline void omap5_irq_save_context(void)
{
u32 i, val;
for (i = 0; i < irq_banks; i++) {
/* Save the CPUx interrupt mask for IRQ 0 to 159 */
val = wakeupgen_readl(i, 0);
sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU0, i);
val = wakeupgen_readl(i, 1);
sar_writel(val, OMAP5_WAKEUPGENENB_OFFSET_CPU1, i);
sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
sar_writel(0x0, OMAP5_WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
}
/* Save AuxBoot* registers */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + OMAP5_AUXCOREBOOT1_OFFSET);
/* Set the Backup Bit Mask status */
val = __raw_readl(sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
val |= SAR_BACKUP_STATUS_WAKEUPGEN;
__raw_writel(val, sar_base + OMAP5_SAR_BACKUP_STATUS_OFFSET);
}
static void irq_save_context(void)
{
u32 i, val;
if (omap_rev() == OMAP4430_REV_ES1_0)
return;
if (!sar_base)
sar_base = omap4_get_sar_ram_base();
for (i = 0; i < NR_REG_BANKS; i++) {
/* */
val = wakeupgen_readl(i, 0);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
val = wakeupgen_readl(i, 1);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU1, i);
/*
*/
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
}
/* */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* */
val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
__raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
__raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET);
/* */
val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
val |= SAR_BACKUP_STATUS_WAKEUPGEN;
__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
}
/*
* Save WakeupGen interrupt context in SAR BANK3. Restore is done by
* ROM code. WakeupGen IP is integrated along with GIC to manage the
* interrupt wakeups from CPU low power states. It manages
* masking/unmasking of Shared peripheral interrupts(SPI). So the
* interrupt enable/disable control should be in sync and consistent
* at WakeupGen and GIC so that interrupts are not lost.
*/
static void irq_save_context(void)
{
u32 i, val;
if (omap_rev() == OMAP4430_REV_ES1_0)
return;
if (!sar_base)
sar_base = omap4_get_sar_ram_base();
for (i = 0; i < NR_REG_BANKS; i++) {
/* Save the CPUx interrupt mask for IRQ 0 to 127 */
val = wakeupgen_readl(i, 0);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU0, i);
val = wakeupgen_readl(i, 1);
sar_writel(val, WAKEUPGENENB_OFFSET_CPU1, i);
/*
* Disable the secure interrupts for CPUx. The restore
* code blindly restores secure and non-secure interrupt
* masks from SAR RAM. Secure interrupts are not suppose
* to be enabled from HLOS. So overwrite the SAR location
* so that the secure interrupt remains disabled.
*/
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU0, i);
sar_writel(0x0, WAKEUPGENENB_SECURE_OFFSET_CPU1, i);
}
/* Save AuxBoot* registers */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* Save SyncReq generation logic */
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT0_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_AUX_CORE_BOOT_0);
__raw_writel(val, sar_base + AUXCOREBOOT1_OFFSET);
/* Save SyncReq generation logic */
val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_MASK);
__raw_writel(val, sar_base + PTMSYNCREQ_MASK_OFFSET);
val = __raw_readl(wakeupgen_base + OMAP_PTMSYNCREQ_EN);
__raw_writel(val, sar_base + PTMSYNCREQ_EN_OFFSET);
/* Set the Backup Bit Mask status */
val = __raw_readl(sar_base + SAR_BACKUP_STATUS_OFFSET);
val |= SAR_BACKUP_STATUS_WAKEUPGEN;
__raw_writel(val, sar_base + SAR_BACKUP_STATUS_OFFSET);
}
/*
* Continue initialise the wakeupgen initialization after sar
* is initialized
*/
void __init omap_wakeupgen_init_finish(void)
{
int i;
unsigned int max_spi_reg;
/*
* Find out how many interrupts are supported.
* OMAP4 supports max of 128 SPIs where as GIC can support
* up to 1020 interrupt sources. On OMAP4, maximum SPIs are
* fused in DIST_CTR bit-fields as 128. Hence the code is safe
* from reserved register writes since its well within 1020.
*/
max_spi_reg = gic_readl(GIC_DIST_CTR, 0) & 0x1f;
/*
* Set CPU0 GIC backup flag permanently for omap4460/70 GP,
* this is needed because of the ROM code bug that breaks
* GIC during wakeup from device off. This errata fix also
* clears the GIC save area during init to prevent restoring
* garbage to the GIC.
*/
if ((cpu_is_omap446x() || cpu_is_omap447x()) &&
omap_type() == OMAP2_DEVICE_TYPE_GP)
pm44xx_errata |= PM_OMAP4_ROM_CPU1_BACKUP_ERRATUM_xxx;
if (cpu_is_omap44xx() && (omap_type() == OMAP2_DEVICE_TYPE_GP)) {
sar_base = omap4_get_sar_ram_base();
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_CPU1_BACKUP_ERRATUM_xxx))
for (i = SAR_BACKUP_STATUS_OFFSET;
i < WAKEUPGENENB_OFFSET_CPU0; i += 4)
sar_writel(0, i, 0);
sar_writel(GIC_ISR_NON_SECURE, SAR_ICDISR_CPU0_OFFSET, 0);
sar_writel(GIC_ISR_NON_SECURE, SAR_ICDISR_CPU1_OFFSET, 0);
for (i = 0; i < max_spi_reg; i++)
sar_writel(GIC_ISR_NON_SECURE, SAR_ICDISR_SPI_OFFSET,
i);
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_CPU1_BACKUP_ERRATUM_xxx))
__raw_writel(SAR_BACKUP_STATUS_GIC_CPU0,
sar_base + SAR_BACKUP_STATUS_OFFSET);
} else {
l3_main_3_oh = omap_hwmod_lookup("l3_main_3");
if (!l3_main_3_oh)
pr_err("%s: failed to get l3_main_3_oh\n", __func__);
}
}
/*
* Initialise the wakeupgen module.
*/
int __init omap_wakeupgen_init(void)
{
int i;
unsigned int boot_cpu = smp_processor_id();
unsigned int max_spi_reg;
/* Not supported on OMAP4 ES1.0 silicon */
if (omap_rev() == OMAP4430_REV_ES1_0) {
WARN(1, "WakeupGen: Not supported on OMAP4430 ES1.0\n");
return -EPERM;
}
/* Static mapping, never released */
wakeupgen_base = ioremap(OMAP_WKUPGEN_BASE, SZ_4K);
if (WARN_ON(!wakeupgen_base))
return -ENOMEM;
if (cpu_is_omap44xx()) {
irq_banks = OMAP4_NR_BANKS;
max_irqs = OMAP4_NR_IRQS;
secure_api_index = OMAP4_HAL_SAVEGIC_INDEX;
secure_hw_api_index = OMAP4_HAL_SAVEHW_INDEX;
secure_hal_save_all_api_index = OMAP4_HAL_SAVEALL_INDEX;
secure_ram_api_index = OMAP4_HAL_SAVESECURERAM_INDEX;
} else if (cpu_is_omap54xx()) {
secure_api_index = OMAP5_HAL_SAVEGIC_INDEX;
secure_hw_api_index = OMAP5_HAL_SAVEHW_INDEX;
secure_hal_save_all_api_index = OMAP5_HAL_SAVEALL_INDEX;
secure_ram_api_index = OMAP5_HAL_SAVESECURERAM_INDEX;
}
/* Clear all IRQ bitmasks at wakeupGen level */
for (i = 0; i < irq_banks; i++) {
wakeupgen_writel(0, i, CPU0_ID);
wakeupgen_writel(0, i, CPU1_ID);
}
/*
* Override GIC architecture specific functions to add
* OMAP WakeupGen interrupt controller along with GIC
*/
gic_arch_extn.irq_mask = wakeupgen_mask;
gic_arch_extn.irq_unmask = wakeupgen_unmask;
gic_arch_extn.flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE;
/*
* FIXME: Add support to set_smp_affinity() once the core
* GIC code has necessary hooks in place.
*/
/* Associate all the IRQs to boot CPU like GIC init does. */
for (i = 0; i < max_irqs; i++)
irq_target_cpu[i] = boot_cpu;
/*
* Find out how many interrupts are supported.
* OMAP4 supports max of 128 SPIs where as GIC can support
* up to 1020 interrupt sources. On OMAP4, maximum SPIs are
* fused in DIST_CTR bit-fields as 128. Hence the code is safe
* from reserved register writes since its well within 1020.
*/
max_spi_reg = gic_readl(GIC_DIST_CTR, 0) & 0x1f;
spi_irq_banks = min(max_spi_reg, irq_banks);
/*
* Set CPU0 GIC backup flag permanently for omap4460 GP,
* this is needed because of the ROM code bug that breaks
* GIC during wakeup from device off. This errata fix also
* clears the GIC save area during init to prevent restoring
* garbage to the GIC.
*/
if (cpu_is_omap446x() && omap_type() == OMAP2_DEVICE_TYPE_GP)
pm44xx_errata |= PM_OMAP4_ROM_CPU1_BACKUP_ERRATUM_xxx;
if (cpu_is_omap44xx() && (omap_type() == OMAP2_DEVICE_TYPE_GP)) {
sar_base = omap4_get_sar_ram_base();
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_CPU1_BACKUP_ERRATUM_xxx))
for (i = SAR_BACKUP_STATUS_OFFSET;
i < WAKEUPGENENB_OFFSET_CPU0; i += 4)
sar_writel(0, i, 0);
sar_writel(GIC_ISR_NON_SECURE, SAR_ICDISR_CPU0_OFFSET, 0);
sar_writel(GIC_ISR_NON_SECURE, SAR_ICDISR_CPU1_OFFSET, 0);
for (i = 0; i < max_spi_reg; i++)
sar_writel(GIC_ISR_NON_SECURE, SAR_ICDISR_SPI_OFFSET,
i);
if (IS_PM44XX_ERRATUM(PM_OMAP4_ROM_CPU1_BACKUP_ERRATUM_xxx))
__raw_writel(SAR_BACKUP_STATUS_GIC_CPU0,
sar_base + SAR_BACKUP_STATUS_OFFSET);
} else {
l3_main_3_oh = omap_hwmod_lookup("l3_main_3");
if (!l3_main_3_oh)
pr_err("%s: failed to get l3_main_3_oh\n", __func__);
}
irq_hotplug_init();
irq_pm_init();
return 0;
}
