static int idescsi_eh_abort (struct scsi_cmnd *cmd)
{
idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host);
ide_drive_t *drive = scsi->drive;
int busy;
int ret = FAILED;
/* In idescsi_eh_abort we try to gently pry our command from the ide subsystem */
if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
printk (KERN_WARNING "ide-scsi: abort called for %lu\n", cmd->serial_number);
if (!drive) {
printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_abort\n");
WARN_ON(1);
goto no_drive;
}
/* First give it some more time, how much is "right" is hard to say :-( */
busy = ide_wait_not_busy(HWIF(drive), 100); /* FIXME - uses mdelay which causes latency? */
if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
printk (KERN_WARNING "ide-scsi: drive did%s become ready\n", busy?" not":"");
spin_lock_irq(&ide_lock);
/* If there is no pc running we're done (our interrupt took care of it) */
if (!scsi->pc) {
ret = SUCCESS;
goto ide_unlock;
}
/* It's somewhere in flight. Does ide subsystem agree? */
if (scsi->pc->scsi_cmd->serial_number == cmd->serial_number && !busy &&
elv_queue_empty(drive->queue) && HWGROUP(drive)->rq != scsi->pc->rq) {
/*
* FIXME - not sure this condition can ever occur
*/
printk (KERN_ERR "ide-scsi: cmd aborted!\n");
if (blk_sense_request(scsi->pc->rq))
kfree(scsi->pc->buf);
/* we need to call blk_put_request twice. */
blk_put_request(scsi->pc->rq);
blk_put_request(scsi->pc->rq);
kfree(scsi->pc);
scsi->pc = NULL;
ret = SUCCESS;
}
ide_unlock:
spin_unlock_irq(&ide_lock);
no_drive:
if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
printk (KERN_WARNING "ide-scsi: abort returns %s\n", ret == SUCCESS?"success":"failed");
return ret;
}
static int idescsi_bios(struct scsi_device *sdev, struct block_device *bdev,
sector_t capacity, int *parm)
{
idescsi_scsi_t *idescsi = scsihost_to_idescsi(sdev->host);
ide_drive_t *drive = idescsi->drive;
if (drive->bios_cyl && drive->bios_head && drive->bios_sect) {
parm[0] = drive->bios_head;
parm[1] = drive->bios_sect;
parm[2] = drive->bios_cyl;
}
return 0;
}
static int idescsi_ioctl (struct scsi_device *dev, int cmd, void __user *arg)
{
idescsi_scsi_t *scsi = scsihost_to_idescsi(dev->host);
if (cmd == SG_SET_TRANSFORM) {
if (arg)
set_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
else
clear_bit(IDESCSI_SG_TRANSFORM, &scsi->transform);
return 0;
} else if (cmd == SG_GET_TRANSFORM)
return put_user(test_bit(IDESCSI_SG_TRANSFORM, &scsi->transform), (int __user *) arg);
return -EINVAL;
}
static void ide_scsi_remove(ide_drive_t *drive)
{
struct Scsi_Host *scsihost = drive->driver_data;
struct ide_scsi_obj *scsi = scsihost_to_idescsi(scsihost);
struct gendisk *g = scsi->disk;
scsi_remove_host(scsihost);
ide_proc_unregister_driver(drive, scsi->driver);
ide_unregister_region(g);
drive->driver_data = NULL;
g->private_data = NULL;
put_disk(g);
ide_scsi_put(scsi);
drive->scsi = 0;
}
static inline idescsi_scsi_t *drive_to_idescsi(ide_drive_t *ide_drive)
{
return scsihost_to_idescsi(ide_drive->driver_data);
}
static int ide_scsi_probe(ide_drive_t *drive)
{
idescsi_scsi_t *idescsi;
struct Scsi_Host *host;
struct gendisk *g;
static int warned;
int err = -ENOMEM;
if (!warned && drive->media == ide_cdrom) {
printk(KERN_WARNING "ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device\n");
warned = 1;
}
if (idescsi_nocd && drive->media == ide_cdrom)
return -ENODEV;
if (!strstr("ide-scsi", drive->driver_req) ||
!drive->present ||
drive->media == ide_disk ||
!(host = scsi_host_alloc(&idescsi_template,sizeof(idescsi_scsi_t))))
return -ENODEV;
drive->scsi = 1;
g = alloc_disk(1 << PARTN_BITS);
if (!g)
goto out_host_put;
ide_init_disk(g, drive);
host->max_id = 1;
if (drive->id->last_lun)
debug_log("%s: id->last_lun=%u\n", drive->name,
drive->id->last_lun);
if ((drive->id->last_lun & 0x7) != 7)
host->max_lun = (drive->id->last_lun & 0x7) + 1;
else
host->max_lun = 1;
drive->driver_data = host;
idescsi = scsihost_to_idescsi(host);
idescsi->drive = drive;
idescsi->driver = &idescsi_driver;
idescsi->host = host;
idescsi->disk = g;
g->private_data = &idescsi->driver;
ide_proc_register_driver(drive, &idescsi_driver);
err = 0;
idescsi_setup(drive, idescsi);
g->fops = &idescsi_ops;
ide_register_region(g);
err = scsi_add_host(host, &drive->gendev);
if (!err) {
scsi_scan_host(host);
return 0;
}
/* fall through on error */
ide_unregister_region(g);
ide_proc_unregister_driver(drive, &idescsi_driver);
put_disk(g);
out_host_put:
drive->scsi = 0;
scsi_host_put(host);
return err;
}
static int idescsi_eh_reset (struct scsi_cmnd *cmd)
{
struct request *req;
idescsi_scsi_t *scsi = scsihost_to_idescsi(cmd->device->host);
ide_drive_t *drive = scsi->drive;
int ready = 0;
int ret = SUCCESS;
/* In idescsi_eh_reset we forcefully remove the command from the ide subsystem and reset the device. */
if (test_bit(IDESCSI_LOG_CMD, &scsi->log))
printk (KERN_WARNING "ide-scsi: reset called for %lu\n", cmd->serial_number);
if (!drive) {
printk (KERN_WARNING "ide-scsi: Drive not set in idescsi_eh_reset\n");
WARN_ON(1);
return FAILED;
}
spin_lock_irq(cmd->device->host->host_lock);
spin_lock(&ide_lock);
if (!scsi->pc || (req = scsi->pc->rq) != HWGROUP(drive)->rq || !HWGROUP(drive)->handler) {
printk (KERN_WARNING "ide-scsi: No active request in idescsi_eh_reset\n");
spin_unlock(&ide_lock);
spin_unlock_irq(cmd->device->host->host_lock);
return FAILED;
}
/* kill current request */
if (__blk_end_request(req, -EIO, 0))
BUG();
if (blk_sense_request(req))
kfree(scsi->pc->buf);
kfree(scsi->pc);
scsi->pc = NULL;
blk_put_request(req);
/* now nuke the drive queue */
while ((req = elv_next_request(drive->queue))) {
if (__blk_end_request(req, -EIO, 0))
BUG();
}
HWGROUP(drive)->rq = NULL;
HWGROUP(drive)->handler = NULL;
HWGROUP(drive)->busy = 1; /* will set this to zero when ide reset finished */
spin_unlock(&ide_lock);
ide_do_reset(drive);
/* ide_do_reset starts a polling handler which restarts itself every 50ms until the reset finishes */
do {
spin_unlock_irq(cmd->device->host->host_lock);
msleep(50);
spin_lock_irq(cmd->device->host->host_lock);
} while ( HWGROUP(drive)->handler );
ready = drive_is_ready(drive);
HWGROUP(drive)->busy--;
if (!ready) {
printk (KERN_ERR "ide-scsi: reset failed!\n");
ret = FAILED;
}
spin_unlock_irq(cmd->device->host->host_lock);
return ret;
}
static int idescsi_queue (struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct Scsi_Host *host = cmd->device->host;
idescsi_scsi_t *scsi = scsihost_to_idescsi(host);
ide_drive_t *drive = scsi->drive;
struct request *rq = NULL;
struct ide_atapi_pc *pc = NULL;
int write = cmd->sc_data_direction == DMA_TO_DEVICE;
if (!drive) {
scmd_printk (KERN_ERR, cmd, "drive not present\n");
goto abort;
}
scsi = drive_to_idescsi(drive);
pc = kmalloc(sizeof(struct ide_atapi_pc), GFP_ATOMIC);
rq = blk_get_request(drive->queue, write, GFP_ATOMIC);
if (rq == NULL || pc == NULL) {
printk (KERN_ERR "ide-scsi: %s: out of memory\n", drive->name);
goto abort;
}
memset (pc->c, 0, 12);
pc->flags = 0;
if (cmd->sc_data_direction == DMA_TO_DEVICE)
pc->flags |= PC_FLAG_WRITING;
pc->rq = rq;
memcpy (pc->c, cmd->cmnd, cmd->cmd_len);
pc->buf = NULL;
pc->sg = scsi_sglist(cmd);
pc->sg_cnt = scsi_sg_count(cmd);
pc->b_count = 0;
pc->req_xfer = pc->buf_size = scsi_bufflen(cmd);
pc->scsi_cmd = cmd;
pc->done = done;
pc->timeout = jiffies + cmd->timeout_per_command;
if (test_bit(IDESCSI_LOG_CMD, &scsi->log)) {
printk ("ide-scsi: %s: que %lu, cmd = ", drive->name, cmd->serial_number);
ide_scsi_hex_dump(cmd->cmnd, cmd->cmd_len);
if (memcmp(pc->c, cmd->cmnd, cmd->cmd_len)) {
printk ("ide-scsi: %s: que %lu, tsl = ", drive->name, cmd->serial_number);
ide_scsi_hex_dump(pc->c, 12);
}
}
rq->special = (char *) pc;
rq->cmd_type = REQ_TYPE_SPECIAL;
spin_unlock_irq(host->host_lock);
rq->ref_count++;
memcpy(rq->cmd, pc->c, 12);
blk_execute_rq_nowait(drive->queue, scsi->disk, rq, 0, NULL);
spin_lock_irq(host->host_lock);
return 0;
abort:
kfree (pc);
if (rq)
blk_put_request(rq);
cmd->result = DID_ERROR << 16;
done(cmd);
return 0;
}
