*/
bool_t sdc_lld_read_aligned(SDCDriver *sdcp, uint32_t startblk,
uint8_t *buf, uint32_t n) {
uint32_t resp[1];
chDbgCheck((n < (0x1000000 / MMCSD_BLOCK_SIZE)), "max transaction size");
//SDIO->DTIMER = STM32_SDC_READ_TIMEOUT;
SDIO->DTIMER = 0xFFFFFFFF; // KL
/* Checks for errors and waits for the card to be ready for reading.*/
if (_sdc_wait_for_transfer_state(sdcp))
return CH_FAILED;
/* Prepares the DMA channel for writing.*/
dmaStreamSetMemory0(sdcp->dma, buf);
dmaStreamSetTransactionSize(sdcp->dma,
(n * MMCSD_BLOCK_SIZE) / sizeof (uint32_t));
dmaStreamSetMode(sdcp->dma, sdcp->dmamode | STM32_DMA_CR_DIR_P2M);
dmaStreamEnable(sdcp->dma);
/* Setting up data transfer.*/
SDIO->ICR = STM32_SDIO_ICR_ALL_FLAGS;
SDIO->MASK = SDIO_MASK_DCRCFAILIE |
SDIO_MASK_DTIMEOUTIE |
SDIO_MASK_STBITERRIE |
SDIO_MASK_RXOVERRIE |
SDIO_MASK_DATAENDIE;
SDIO->DLEN = n * MMCSD_BLOCK_SIZE;
/* Talk to card what we want from it.*/
if (sdc_lld_prepare_read(sdcp, startblk, n, resp) == TRUE)
goto error;
/* Transaction starts just after DTEN bit setting.*/
SDIO->DCTRL = SDIO_DCTRL_DTDIR |
SDIO_DCTRL_DBLOCKSIZE_3 |
SDIO_DCTRL_DBLOCKSIZE_0 |
SDIO_DCTRL_DMAEN |
SDIO_DCTRL_DTEN;
if (sdc_lld_wait_transaction_end(sdcp, n, resp) == TRUE)
goto error;
return CH_SUCCESS;
error:
sdc_lld_error_cleanup(sdcp, n, resp);
return CH_FAILED;
/**
* @brief Writes one or more blocks.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[in] startblk first block to write
* @param[out] buf pointer to the write buffer
* @param[in] n number of blocks to write
*
* @return The operation status.
* @retval HAL_SUCCESS operation succeeded.
* @retval HAL_FAILED operation failed.
*
* @notapi
*/
bool sdc_lld_write_aligned(SDCDriver *sdcp, uint32_t startblk,
const uint8_t *buf, uint32_t blocks) {
uint32_t resp[1];
osalDbgCheck(blocks < 0x1000000 / MMCSD_BLOCK_SIZE);
sdcp->sdio->DTIMER = STM32_SDC_WRITE_TIMEOUT;
/* Checks for errors and waits for the card to be ready for writing.*/
if (_sdc_wait_for_transfer_state(sdcp))
return HAL_FAILED;
/* Prepares the DMA channel for writing.*/
dmaStreamSetMemory0(sdcp->dma, buf);
dmaStreamSetTransactionSize(sdcp->dma,
(blocks * MMCSD_BLOCK_SIZE) / sizeof (uint32_t));
dmaStreamSetMode(sdcp->dma, sdcp->dmamode | STM32_DMA_CR_DIR_M2P);
dmaStreamEnable(sdcp->dma);
/* Setting up data transfer.*/
sdcp->sdio->ICR = STM32_SDIO_ICR_ALL_FLAGS;
sdcp->sdio->MASK = SDIO_MASK_DCRCFAILIE |
SDIO_MASK_DTIMEOUTIE |
SDIO_MASK_STBITERRIE |
SDIO_MASK_TXUNDERRIE |
SDIO_MASK_DATAENDIE;
sdcp->sdio->DLEN = blocks * MMCSD_BLOCK_SIZE;
/* Talk to card what we want from it.*/
if (sdc_lld_prepare_write(sdcp, startblk, blocks, resp) == TRUE)
goto error;
/* Transaction starts just after DTEN bit setting.*/
sdcp->sdio->DCTRL = SDIO_DCTRL_DBLOCKSIZE_3 |
SDIO_DCTRL_DBLOCKSIZE_0 |
SDIO_DCTRL_DMAEN |
SDIO_DCTRL_DTEN;
if (sdc_lld_wait_transaction_end(sdcp, blocks, resp) == TRUE)
goto error;
return HAL_SUCCESS;
error:
sdc_lld_error_cleanup(sdcp, blocks, resp);
return HAL_FAILED;
}
/**
* @brief Reads special registers using data bus.
* @details Needs only during card detection procedure.
*
* @param[in] sdcp pointer to the @p SDCDriver object
* @param[out] buf pointer to the read buffer
* @param[in] bytes number of bytes to read
* @param[in] cmd card command
* @param[in] arg argument for command
*
* @return The operation status.
* @retval HAL_SUCCESS operation succeeded.
* @retval HAL_FAILED operation failed.
*
* @notapi
*/
bool sdc_lld_read_special(SDCDriver *sdcp, uint8_t *buf, size_t bytes,
uint8_t cmd, uint32_t arg) {
uint32_t resp[1];
if(sdc_lld_prepare_read_bytes(sdcp, buf, bytes))
goto error;
if (sdc_lld_send_cmd_short_crc(sdcp, cmd, arg, resp)
|| MMCSD_R1_ERROR(resp[0]))
goto error;
if (sdc_lld_wait_transaction_end(sdcp, 1, resp))
goto error;
return HAL_SUCCESS;
error:
sdc_lld_error_cleanup(sdcp, 1, resp);
return HAL_FAILED;
}