void test_exhaustive_recovery_verify(const secp256k1_context *ctx, const secp256k1_ge *group, int order) {
/* This is essentially a copy of test_exhaustive_verify, with recovery added */
int s, r, msg, key;
for (s = 1; s < order; s++) {
for (r = 1; r < order; r++) {
for (msg = 1; msg < order; msg++) {
for (key = 1; key < order; key++) {
secp256k1_ge nonconst_ge;
secp256k1_ecdsa_recoverable_signature rsig;
secp256k1_ecdsa_signature sig;
secp256k1_pubkey pk;
secp256k1_scalar sk_s, msg_s, r_s, s_s;
secp256k1_scalar s_times_k_s, msg_plus_r_times_sk_s;
int recid = 0;
int k, should_verify;
unsigned char msg32[32];
secp256k1_scalar_set_int(&s_s, s);
secp256k1_scalar_set_int(&r_s, r);
secp256k1_scalar_set_int(&msg_s, msg);
secp256k1_scalar_set_int(&sk_s, key);
secp256k1_scalar_get_b32(msg32, &msg_s);
/* Verify by hand */
/* Run through every k value that gives us this r and check that *one* works.
* Note there could be none, there could be multiple, ECDSA is weird. */
should_verify = 0;
for (k = 0; k < order; k++) {
secp256k1_scalar check_x_s;
r_from_k(&check_x_s, group, k);
if (r_s == check_x_s) {
secp256k1_scalar_set_int(&s_times_k_s, k);
secp256k1_scalar_mul(&s_times_k_s, &s_times_k_s, &s_s);
secp256k1_scalar_mul(&msg_plus_r_times_sk_s, &r_s, &sk_s);
secp256k1_scalar_add(&msg_plus_r_times_sk_s, &msg_plus_r_times_sk_s, &msg_s);
should_verify |= secp256k1_scalar_eq(&s_times_k_s, &msg_plus_r_times_sk_s);
}
}
/* nb we have a "high s" rule */
should_verify &= !secp256k1_scalar_is_high(&s_s);
/* We would like to try recovering the pubkey and checking that it matches,
* but pubkey recovery is impossible in the exhaustive tests (the reason
* being that there are 12 nonzero r values, 12 nonzero points, and no
* overlap between the sets, so there are no valid signatures). */
/* Verify by converting to a standard signature and calling verify */
secp256k1_ecdsa_recoverable_signature_save(&rsig, &r_s, &s_s, recid);
secp256k1_ecdsa_recoverable_signature_convert(ctx, &sig, &rsig);
memcpy(&nonconst_ge, &group[sk_s], sizeof(nonconst_ge));
secp256k1_pubkey_save(&pk, &nonconst_ge);
CHECK(should_verify ==
secp256k1_ecdsa_verify(ctx, &sig, msg32, &pk));
}
}
}
}
}
void test_exhaustive_verify(const secp256k1_context *ctx, const secp256k1_ge *group, int order) {
int s, r, msg, key;
for (s = 1; s < order; s++) {
for (r = 1; r < order; r++) {
for (msg = 1; msg < order; msg++) {
for (key = 1; key < order; key++) {
secp256k1_ge nonconst_ge;
secp256k1_ecdsa_signature sig;
secp256k1_pubkey pk;
secp256k1_scalar sk_s, msg_s, r_s, s_s;
secp256k1_scalar s_times_k_s, msg_plus_r_times_sk_s;
int k, should_verify;
unsigned char msg32[32];
secp256k1_scalar_set_int(&s_s, s);
secp256k1_scalar_set_int(&r_s, r);
secp256k1_scalar_set_int(&msg_s, msg);
secp256k1_scalar_set_int(&sk_s, key);
/* Verify by hand */
/* Run through every k value that gives us this r and check that *one* works.
* Note there could be none, there could be multiple, ECDSA is weird. */
should_verify = 0;
for (k = 0; k < order; k++) {
secp256k1_scalar check_x_s;
r_from_k(&check_x_s, group, k);
if (r_s == check_x_s) {
secp256k1_scalar_set_int(&s_times_k_s, k);
secp256k1_scalar_mul(&s_times_k_s, &s_times_k_s, &s_s);
secp256k1_scalar_mul(&msg_plus_r_times_sk_s, &r_s, &sk_s);
secp256k1_scalar_add(&msg_plus_r_times_sk_s, &msg_plus_r_times_sk_s, &msg_s);
should_verify |= secp256k1_scalar_eq(&s_times_k_s, &msg_plus_r_times_sk_s);
}
}
/* nb we have a "high s" rule */
should_verify &= !secp256k1_scalar_is_high(&s_s);
/* Verify by calling verify */
secp256k1_ecdsa_signature_save(&sig, &r_s, &s_s);
memcpy(&nonconst_ge, &group[sk_s], sizeof(nonconst_ge));
secp256k1_pubkey_save(&pk, &nonconst_ge);
secp256k1_scalar_get_b32(msg32, &msg_s);
CHECK(should_verify ==
secp256k1_ecdsa_verify(ctx, &sig, msg32, &pk));
}
}
}
}
}
void test_wnaf(const secp256k1_scalar_t *number, int w) {
secp256k1_scalar_t x, two, t;
secp256k1_scalar_set_int(&x, 0);
secp256k1_scalar_set_int(&two, 2);
int wnaf[256];
int bits = secp256k1_ecmult_wnaf(wnaf, number, w);
CHECK(bits <= 256);
int zeroes = -1;
for (int i=bits-1; i>=0; i--) {
secp256k1_scalar_mul(&x, &x, &two);
int v = wnaf[i];
if (v) {
CHECK(zeroes == -1 || zeroes >= w-1); /* check that distance between non-zero elements is at least w-1 */
zeroes=0;
CHECK((v & 1) == 1); /* check non-zero elements are odd */
CHECK(v <= (1 << (w-1)) - 1); /* check range below */
CHECK(v >= -(1 << (w-1)) - 1); /* check range above */
} else {
CHECK(zeroes != -1); /* check that no unnecessary zero padding exists */
zeroes++;
}
if (v >= 0) {
secp256k1_scalar_set_int(&t, v);
} else {
secp256k1_scalar_set_int(&t, -v);
secp256k1_scalar_negate(&t, &t);
}
secp256k1_scalar_add(&x, &x, &t);
}
CHECK(secp256k1_scalar_eq(&x, number)); /* check that wnaf represents number */
}
static void run_test(bench_data* data, size_t count, int includes_g) {
char str[32];
static const secp256k1_scalar zero = SECP256K1_SCALAR_CONST(0, 0, 0, 0, 0, 0, 0, 0);
size_t iters = 1 + ITERS / count;
size_t iter;
data->count = count;
data->includes_g = includes_g;
/* Compute (the negation of) the expected results directly. */
data->offset1 = (data->count * 0x537b7f6f + 0x8f66a481) % POINTS;
data->offset2 = (data->count * 0x7f6f537b + 0x6a1a8f49) % POINTS;
for (iter = 0; iter < iters; ++iter) {
secp256k1_scalar tmp;
secp256k1_scalar total = data->scalars[(data->offset1++) % POINTS];
size_t i = 0;
for (i = 0; i + 1 < count; ++i) {
secp256k1_scalar_mul(&tmp, &data->seckeys[(data->offset2++) % POINTS], &data->scalars[(data->offset1++) % POINTS]);
secp256k1_scalar_add(&total, &total, &tmp);
}
secp256k1_scalar_negate(&total, &total);
secp256k1_ecmult(&data->ctx->ecmult_ctx, &data->expected_output[iter], NULL, &zero, &total);
}
/* Run the benchmark. */
sprintf(str, includes_g ? "ecmult_%ig" : "ecmult_%i", (int)count);
run_benchmark(str, bench_ecmult, bench_ecmult_setup, bench_ecmult_teardown, data, 10, count * (1 + ITERS / count));
}
void bench_scalar_mul(void* arg) {
int i;
bench_inv_t *data = (bench_inv_t*)arg;
for (i = 0; i < 200000; i++) {
secp256k1_scalar_mul(&data->scalar_x, &data->scalar_x, &data->scalar_y);
}
}
void run_ecmult_chain(void) {
/* random starting point A (on the curve) */
secp256k1_fe_t ax; VERIFY_CHECK(secp256k1_fe_set_hex(&ax, "8b30bbe9ae2a990696b22f670709dff3727fd8bc04d3362c6c7bf458e2846004", 64));
secp256k1_fe_t ay; VERIFY_CHECK(secp256k1_fe_set_hex(&ay, "a357ae915c4a65281309edf20504740f0eb3343990216b4f81063cb65f2f7e0f", 64));
secp256k1_gej_t a; secp256k1_gej_set_xy(&a, &ax, &ay);
/* two random initial factors xn and gn */
static const unsigned char xni[32] = {
0x84, 0xcc, 0x54, 0x52, 0xf7, 0xfd, 0xe1, 0xed,
0xb4, 0xd3, 0x8a, 0x8c, 0xe9, 0xb1, 0xb8, 0x4c,
0xce, 0xf3, 0x1f, 0x14, 0x6e, 0x56, 0x9b, 0xe9,
0x70, 0x5d, 0x35, 0x7a, 0x42, 0x98, 0x54, 0x07
};
secp256k1_scalar_t xn;
secp256k1_scalar_set_b32(&xn, xni, NULL);
static const unsigned char gni[32] = {
0xa1, 0xe5, 0x8d, 0x22, 0x55, 0x3d, 0xcd, 0x42,
0xb2, 0x39, 0x80, 0x62, 0x5d, 0x4c, 0x57, 0xa9,
0x6e, 0x93, 0x23, 0xd4, 0x2b, 0x31, 0x52, 0xe5,
0xca, 0x2c, 0x39, 0x90, 0xed, 0xc7, 0xc9, 0xde
};
secp256k1_scalar_t gn;
secp256k1_scalar_set_b32(&gn, gni, NULL);
/* two small multipliers to be applied to xn and gn in every iteration: */
static const unsigned char xfi[32] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0x13,0x37};
secp256k1_scalar_t xf;
secp256k1_scalar_set_b32(&xf, xfi, NULL);
static const unsigned char gfi[32] = {0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0x71,0x13};
secp256k1_scalar_t gf;
secp256k1_scalar_set_b32(&gf, gfi, NULL);
/* accumulators with the resulting coefficients to A and G */
secp256k1_scalar_t ae;
secp256k1_scalar_set_int(&ae, 1);
secp256k1_scalar_t ge;
secp256k1_scalar_set_int(&ge, 0);
/* the point being computed */
secp256k1_gej_t x = a;
for (int i=0; i<200*count; i++) {
/* in each iteration, compute X = xn*X + gn*G; */
secp256k1_ecmult(&x, &x, &xn, &gn);
/* also compute ae and ge: the actual accumulated factors for A and G */
/* if X was (ae*A+ge*G), xn*X + gn*G results in (xn*ae*A + (xn*ge+gn)*G) */
secp256k1_scalar_mul(&ae, &ae, &xn);
secp256k1_scalar_mul(&ge, &ge, &xn);
secp256k1_scalar_add(&ge, &ge, &gn);
/* modify xn and gn */
secp256k1_scalar_mul(&xn, &xn, &xf);
secp256k1_scalar_mul(&gn, &gn, &gf);
/* verify */
if (i == 19999) {
char res[132]; int resl = 132;
secp256k1_gej_get_hex(res, &resl, &x);
CHECK(strcmp(res, "(D6E96687F9B10D092A6F35439D86CEBEA4535D0D409F53586440BD74B933E830,B95CBCA2C77DA786539BE8FD53354D2D3B4F566AE658045407ED6015EE1B2A88)") == 0);
}
}
/* redo the computation, but directly with the resulting ae and ge coefficients: */
secp256k1_gej_t x2; secp256k1_ecmult(&x2, &a, &ae, &ge);
char res[132]; int resl = 132;
char res2[132]; int resl2 = 132;
secp256k1_gej_get_hex(res, &resl, &x);
secp256k1_gej_get_hex(res2, &resl2, &x2);
CHECK(strcmp(res, res2) == 0);
CHECK(strlen(res) == 131);
}
void scalar_test(void) {
unsigned char c[32];
/* Set 's' to a random scalar, with value 'snum'. */
secp256k1_scalar_t s;
random_scalar_order_test(&s);
/* Set 's1' to a random scalar, with value 's1num'. */
secp256k1_scalar_t s1;
random_scalar_order_test(&s1);
/* Set 's2' to a random scalar, with value 'snum2', and byte array representation 'c'. */
secp256k1_scalar_t s2;
random_scalar_order_test(&s2);
secp256k1_scalar_get_b32(c, &s2);
#ifndef USE_NUM_NONE
secp256k1_num_t snum, s1num, s2num;
secp256k1_scalar_get_num(&snum, &s);
secp256k1_scalar_get_num(&s1num, &s1);
secp256k1_scalar_get_num(&s2num, &s2);
secp256k1_num_t order;
secp256k1_scalar_order_get_num(&order);
secp256k1_num_t half_order = order;
secp256k1_num_shift(&half_order, 1);
#endif
{
/* Test that fetching groups of 4 bits from a scalar and recursing n(i)=16*n(i-1)+p(i) reconstructs it. */
secp256k1_scalar_t n;
secp256k1_scalar_set_int(&n, 0);
for (int i = 0; i < 256; i += 4) {
secp256k1_scalar_t t;
secp256k1_scalar_set_int(&t, secp256k1_scalar_get_bits(&s, 256 - 4 - i, 4));
for (int j = 0; j < 4; j++) {
secp256k1_scalar_add(&n, &n, &n);
}
secp256k1_scalar_add(&n, &n, &t);
}
CHECK(secp256k1_scalar_eq(&n, &s));
}
{
/* Test that fetching groups of randomly-sized bits from a scalar and recursing n(i)=b*n(i-1)+p(i) reconstructs it. */
secp256k1_scalar_t n;
secp256k1_scalar_set_int(&n, 0);
int i = 0;
while (i < 256) {
int now = (secp256k1_rand32() % 15) + 1;
if (now + i > 256) {
now = 256 - i;
}
secp256k1_scalar_t t;
secp256k1_scalar_set_int(&t, secp256k1_scalar_get_bits_var(&s, 256 - now - i, now));
for (int j = 0; j < now; j++) {
secp256k1_scalar_add(&n, &n, &n);
}
secp256k1_scalar_add(&n, &n, &t);
i += now;
}
CHECK(secp256k1_scalar_eq(&n, &s));
}
#ifndef USE_NUM_NONE
{
/* Test that adding the scalars together is equal to adding their numbers together modulo the order. */
secp256k1_num_t rnum;
secp256k1_num_add(&rnum, &snum, &s2num);
secp256k1_num_mod(&rnum, &order);
secp256k1_scalar_t r;
secp256k1_scalar_add(&r, &s, &s2);
secp256k1_num_t r2num;
secp256k1_scalar_get_num(&r2num, &r);
CHECK(secp256k1_num_eq(&rnum, &r2num));
}
{
/* Test that multipying the scalars is equal to multiplying their numbers modulo the order. */
secp256k1_num_t rnum;
secp256k1_num_mul(&rnum, &snum, &s2num);
secp256k1_num_mod(&rnum, &order);
secp256k1_scalar_t r;
secp256k1_scalar_mul(&r, &s, &s2);
secp256k1_num_t r2num;
secp256k1_scalar_get_num(&r2num, &r);
CHECK(secp256k1_num_eq(&rnum, &r2num));
/* The result can only be zero if at least one of the factors was zero. */
CHECK(secp256k1_scalar_is_zero(&r) == (secp256k1_scalar_is_zero(&s) || secp256k1_scalar_is_zero(&s2)));
/* The results can only be equal to one of the factors if that factor was zero, or the other factor was one. */
CHECK(secp256k1_num_eq(&rnum, &snum) == (secp256k1_scalar_is_zero(&s) || secp256k1_scalar_is_one(&s2)));
CHECK(secp256k1_num_eq(&rnum, &s2num) == (secp256k1_scalar_is_zero(&s2) || secp256k1_scalar_is_one(&s)));
}
{
/* Check that comparison with zero matches comparison with zero on the number. */
CHECK(secp256k1_num_is_zero(&snum) == secp256k1_scalar_is_zero(&s));
/* Check that comparison with the half order is equal to testing for high scalar. */
CHECK(secp256k1_scalar_is_high(&s) == (secp256k1_num_cmp(&snum, &half_order) > 0));
secp256k1_scalar_t neg;
secp256k1_scalar_negate(&neg, &s);
secp256k1_num_t negnum;
secp256k1_num_sub(&negnum, &order, &snum);
secp256k1_num_mod(&negnum, &order);
/* Check that comparison with the half order is equal to testing for high scalar after negation. */
CHECK(secp256k1_scalar_is_high(&neg) == (secp256k1_num_cmp(&negnum, &half_order) > 0));
/* Negating should change the high property, unless the value was already zero. */
CHECK((secp256k1_scalar_is_high(&s) == secp256k1_scalar_is_high(&neg)) == secp256k1_scalar_is_zero(&s));
secp256k1_num_t negnum2;
secp256k1_scalar_get_num(&negnum2, &neg);
/* Negating a scalar should be equal to (order - n) mod order on the number. */
CHECK(secp256k1_num_eq(&negnum, &negnum2));
secp256k1_scalar_add(&neg, &neg, &s);
/* Adding a number to its negation should result in zero. */
CHECK(secp256k1_scalar_is_zero(&neg));
secp256k1_scalar_negate(&neg, &neg);
/* Negating zero should still result in zero. */
CHECK(secp256k1_scalar_is_zero(&neg));
}
{
/* Test secp256k1_scalar_mul_shift_var. */
secp256k1_scalar_t r;
unsigned int shift = 256 + (secp256k1_rand32() % 257);
secp256k1_scalar_mul_shift_var(&r, &s1, &s2, shift);
secp256k1_num_t rnum;
secp256k1_num_mul(&rnum, &s1num, &s2num);
secp256k1_num_shift(&rnum, shift - 1);
secp256k1_num_t one;
unsigned char cone[1] = {0x01};
secp256k1_num_set_bin(&one, cone, 1);
secp256k1_num_add(&rnum, &rnum, &one);
secp256k1_num_shift(&rnum, 1);
secp256k1_num_t rnum2;
secp256k1_scalar_get_num(&rnum2, &r);
CHECK(secp256k1_num_eq(&rnum, &rnum2));
}
#endif
{
/* Test that scalar inverses are equal to the inverse of their number modulo the order. */
if (!secp256k1_scalar_is_zero(&s)) {
secp256k1_scalar_t inv;
secp256k1_scalar_inverse(&inv, &s);
#ifndef USE_NUM_NONE
secp256k1_num_t invnum;
secp256k1_num_mod_inverse(&invnum, &snum, &order);
secp256k1_num_t invnum2;
secp256k1_scalar_get_num(&invnum2, &inv);
CHECK(secp256k1_num_eq(&invnum, &invnum2));
#endif
secp256k1_scalar_mul(&inv, &inv, &s);
/* Multiplying a scalar with its inverse must result in one. */
CHECK(secp256k1_scalar_is_one(&inv));
secp256k1_scalar_inverse(&inv, &inv);
/* Inverting one must result in one. */
CHECK(secp256k1_scalar_is_one(&inv));
}
}
{
/* Test commutativity of add. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_add(&r1, &s1, &s2);
secp256k1_scalar_add(&r2, &s2, &s1);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test add_bit. */
int bit = secp256k1_rand32() % 256;
secp256k1_scalar_t b;
secp256k1_scalar_set_int(&b, 1);
CHECK(secp256k1_scalar_is_one(&b));
for (int i = 0; i < bit; i++) {
secp256k1_scalar_add(&b, &b, &b);
}
secp256k1_scalar_t r1 = s1, r2 = s1;
if (!secp256k1_scalar_add(&r1, &r1, &b)) {
/* No overflow happened. */
secp256k1_scalar_add_bit(&r2, bit);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
}
{
/* Test commutativity of mul. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_mul(&r1, &s1, &s2);
secp256k1_scalar_mul(&r2, &s2, &s1);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test associativity of add. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_add(&r1, &s1, &s2);
secp256k1_scalar_add(&r1, &r1, &s);
secp256k1_scalar_add(&r2, &s2, &s);
secp256k1_scalar_add(&r2, &s1, &r2);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test associativity of mul. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_mul(&r1, &s1, &s2);
secp256k1_scalar_mul(&r1, &r1, &s);
secp256k1_scalar_mul(&r2, &s2, &s);
secp256k1_scalar_mul(&r2, &s1, &r2);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test distributitivity of mul over add. */
secp256k1_scalar_t r1, r2, t;
secp256k1_scalar_add(&r1, &s1, &s2);
secp256k1_scalar_mul(&r1, &r1, &s);
secp256k1_scalar_mul(&r2, &s1, &s);
secp256k1_scalar_mul(&t, &s2, &s);
secp256k1_scalar_add(&r2, &r2, &t);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test square. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_sqr(&r1, &s1);
secp256k1_scalar_mul(&r2, &s1, &s1);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
}
void scalar_test(void) {
unsigned char c[32];
/* Set 's' to a random scalar, with value 'snum'. */
secp256k1_rand256_test(c);
secp256k1_scalar_t s;
secp256k1_scalar_set_b32(&s, c, NULL);
secp256k1_num_t snum;
secp256k1_num_set_bin(&snum, c, 32);
secp256k1_num_mod(&snum, &secp256k1_ge_consts->order);
/* Set 's1' to a random scalar, with value 's1num'. */
secp256k1_rand256_test(c);
secp256k1_scalar_t s1;
secp256k1_scalar_set_b32(&s1, c, NULL);
secp256k1_num_t s1num;
secp256k1_num_set_bin(&s1num, c, 32);
secp256k1_num_mod(&s1num, &secp256k1_ge_consts->order);
/* Set 's2' to a random scalar, with value 'snum2', and byte array representation 'c'. */
secp256k1_rand256_test(c);
secp256k1_scalar_t s2;
int overflow = 0;
secp256k1_scalar_set_b32(&s2, c, &overflow);
secp256k1_num_t s2num;
secp256k1_num_set_bin(&s2num, c, 32);
secp256k1_num_mod(&s2num, &secp256k1_ge_consts->order);
{
/* Test that fetching groups of 4 bits from a scalar and recursing n(i)=16*n(i-1)+p(i) reconstructs it. */
secp256k1_num_t n, t, m;
secp256k1_num_set_int(&n, 0);
secp256k1_num_set_int(&m, 16);
for (int i = 0; i < 256; i += 4) {
secp256k1_num_set_int(&t, secp256k1_scalar_get_bits(&s, 256 - 4 - i, 4));
secp256k1_num_mul(&n, &n, &m);
secp256k1_num_add(&n, &n, &t);
}
CHECK(secp256k1_num_eq(&n, &snum));
}
{
/* Test that get_b32 returns the same as get_bin on the number. */
unsigned char r1[32];
secp256k1_scalar_get_b32(r1, &s2);
unsigned char r2[32];
secp256k1_num_get_bin(r2, 32, &s2num);
CHECK(memcmp(r1, r2, 32) == 0);
/* If no overflow occurred when assigning, it should also be equal to the original byte array. */
CHECK((memcmp(r1, c, 32) == 0) == (overflow == 0));
}
{
/* Test that adding the scalars together is equal to adding their numbers together modulo the order. */
secp256k1_num_t rnum;
secp256k1_num_add(&rnum, &snum, &s2num);
secp256k1_num_mod(&rnum, &secp256k1_ge_consts->order);
secp256k1_scalar_t r;
secp256k1_scalar_add(&r, &s, &s2);
secp256k1_num_t r2num;
secp256k1_scalar_get_num(&r2num, &r);
CHECK(secp256k1_num_eq(&rnum, &r2num));
}
{
/* Test that multipying the scalars is equal to multiplying their numbers modulo the order. */
secp256k1_num_t rnum;
secp256k1_num_mul(&rnum, &snum, &s2num);
secp256k1_num_mod(&rnum, &secp256k1_ge_consts->order);
secp256k1_scalar_t r;
secp256k1_scalar_mul(&r, &s, &s2);
secp256k1_num_t r2num;
secp256k1_scalar_get_num(&r2num, &r);
CHECK(secp256k1_num_eq(&rnum, &r2num));
/* The result can only be zero if at least one of the factors was zero. */
CHECK(secp256k1_scalar_is_zero(&r) == (secp256k1_scalar_is_zero(&s) || secp256k1_scalar_is_zero(&s2)));
/* The results can only be equal to one of the factors if that factor was zero, or the other factor was one. */
CHECK(secp256k1_num_eq(&rnum, &snum) == (secp256k1_scalar_is_zero(&s) || secp256k1_scalar_is_one(&s2)));
CHECK(secp256k1_num_eq(&rnum, &s2num) == (secp256k1_scalar_is_zero(&s2) || secp256k1_scalar_is_one(&s)));
}
{
/* Check that comparison with zero matches comparison with zero on the number. */
CHECK(secp256k1_num_is_zero(&snum) == secp256k1_scalar_is_zero(&s));
/* Check that comparison with the half order is equal to testing for high scalar. */
CHECK(secp256k1_scalar_is_high(&s) == (secp256k1_num_cmp(&snum, &secp256k1_ge_consts->half_order) > 0));
secp256k1_scalar_t neg;
secp256k1_scalar_negate(&neg, &s);
secp256k1_num_t negnum;
secp256k1_num_sub(&negnum, &secp256k1_ge_consts->order, &snum);
secp256k1_num_mod(&negnum, &secp256k1_ge_consts->order);
/* Check that comparison with the half order is equal to testing for high scalar after negation. */
CHECK(secp256k1_scalar_is_high(&neg) == (secp256k1_num_cmp(&negnum, &secp256k1_ge_consts->half_order) > 0));
/* Negating should change the high property, unless the value was already zero. */
CHECK((secp256k1_scalar_is_high(&s) == secp256k1_scalar_is_high(&neg)) == secp256k1_scalar_is_zero(&s));
secp256k1_num_t negnum2;
secp256k1_scalar_get_num(&negnum2, &neg);
/* Negating a scalar should be equal to (order - n) mod order on the number. */
CHECK(secp256k1_num_eq(&negnum, &negnum2));
secp256k1_scalar_add(&neg, &neg, &s);
/* Adding a number to its negation should result in zero. */
CHECK(secp256k1_scalar_is_zero(&neg));
secp256k1_scalar_negate(&neg, &neg);
/* Negating zero should still result in zero. */
CHECK(secp256k1_scalar_is_zero(&neg));
}
{
/* Test that scalar inverses are equal to the inverse of their number modulo the order. */
if (!secp256k1_scalar_is_zero(&s)) {
secp256k1_scalar_t inv;
secp256k1_scalar_inverse(&inv, &s);
secp256k1_num_t invnum;
secp256k1_num_mod_inverse(&invnum, &snum, &secp256k1_ge_consts->order);
secp256k1_num_t invnum2;
secp256k1_scalar_get_num(&invnum2, &inv);
CHECK(secp256k1_num_eq(&invnum, &invnum2));
secp256k1_scalar_mul(&inv, &inv, &s);
/* Multiplying a scalar with its inverse must result in one. */
CHECK(secp256k1_scalar_is_one(&inv));
secp256k1_scalar_inverse(&inv, &inv);
/* Inverting one must result in one. */
CHECK(secp256k1_scalar_is_one(&inv));
}
}
{
/* Test commutativity of add. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_add(&r1, &s1, &s2);
secp256k1_scalar_add(&r2, &s2, &s1);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test commutativity of mul. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_mul(&r1, &s1, &s2);
secp256k1_scalar_mul(&r2, &s2, &s1);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test associativity of add. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_add(&r1, &s1, &s2);
secp256k1_scalar_add(&r1, &r1, &s);
secp256k1_scalar_add(&r2, &s2, &s);
secp256k1_scalar_add(&r2, &s1, &r2);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test associativity of mul. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_mul(&r1, &s1, &s2);
secp256k1_scalar_mul(&r1, &r1, &s);
secp256k1_scalar_mul(&r2, &s2, &s);
secp256k1_scalar_mul(&r2, &s1, &r2);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test distributitivity of mul over add. */
secp256k1_scalar_t r1, r2, t;
secp256k1_scalar_add(&r1, &s1, &s2);
secp256k1_scalar_mul(&r1, &r1, &s);
secp256k1_scalar_mul(&r2, &s1, &s);
secp256k1_scalar_mul(&t, &s2, &s);
secp256k1_scalar_add(&r2, &r2, &t);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
{
/* Test square. */
secp256k1_scalar_t r1, r2;
secp256k1_scalar_sqr(&r1, &s1);
secp256k1_scalar_mul(&r2, &s1, &s1);
CHECK(secp256k1_scalar_eq(&r1, &r2));
}
}
