bool sensorsAutodetect(void)
{
memset(&acc, 0, sizeof(acc));
memset(&gyro, 0, sizeof(gyro));
#if defined(USE_GYRO_MPU6050) || defined(USE_GYRO_MPU3050) || defined(USE_GYRO_MPU6500) || defined(USE_GYRO_SPI_MPU6500) || defined(USE_GYRO_SPI_MPU6000) || defined(USE_ACC_MPU6050)
const extiConfig_t *extiConfig = selectMPUIntExtiConfig();
mpuDetectionResult_t *mpuDetectionResult = detectMpu(extiConfig);
UNUSED(mpuDetectionResult);
#endif
if (!detectGyro()) {
return false;
}
detectAcc(sensorSelectionConfig()->acc_hardware);
detectBaro(sensorSelectionConfig()->baro_hardware);
// Now time to init things, acc first
if (sensors(SENSOR_ACC))
acc.init();
// this is safe because either mpu6050 or mpu3050 or lg3d20 sets it, and in case of fail, we never get here.
gyro.init(gyroConfig()->gyro_lpf);
#ifdef MAG
detectMag(sensorSelectionConfig()->mag_hardware);
#endif
reconfigureAlignment(sensorAlignmentConfig());
return true;
}
bool sensorsAutodetect(sensorAlignmentConfig_t *sensorAlignmentConfig, uint8_t gyroLpf, uint8_t accHardwareToUse, uint8_t magHardwareToUse, uint8_t baroHardwareToUse,
int16_t magDeclinationFromConfig,
uint32_t looptime, uint8_t gyroSync, uint8_t gyroSyncDenominator) {
int16_t deg, min;
#ifndef MAG
UNUSED(magHardwareToUse);
#endif
memset(&acc, 0, sizeof(acc));
memset(&gyro, 0, sizeof(gyro));
#if defined(USE_GYRO_MPU6050) || defined(USE_GYRO_MPU3050) || defined(USE_GYRO_MPU6500) || defined(USE_GYRO_SPI_MPU6500) || defined(USE_GYRO_SPI_MPU6000) || defined(USE_ACC_MPU6050)
const extiConfig_t *extiConfig = selectMPUIntExtiConfig();
mpuDetectionResult_t *mpuDetectionResult = detectMpu(extiConfig);
UNUSED(mpuDetectionResult);
#endif
if (!detectGyro()) {
return false;
}
detectAcc(accHardwareToUse);
detectBaro(baroHardwareToUse);
// Now time to init things, acc first
if (sensors(SENSOR_ACC))
acc.init();
// this is safe because either mpu6050 or mpu3050 or lg3d20 sets it, and in case of fail, we never get here.
gyroUpdateSampleRate(looptime, gyroLpf, gyroSync, gyroSyncDenominator); // Set gyro sampling rate divider before initialization
gyro.init(gyroLpf);
#ifdef MAG
detectMag(magHardwareToUse);
#endif
reconfigureAlignment(sensorAlignmentConfig);
// FIXME extract to a method to reduce dependencies, maybe move to sensors_compass.c
if (sensors(SENSOR_MAG)) {
// calculate magnetic declination
deg = magDeclinationFromConfig / 100;
min = magDeclinationFromConfig % 100;
magneticDeclination = (deg + ((float)min * (1.0f / 60.0f))) * 10; // heading is in 0.1deg units
} else {
magneticDeclination = 0.0f; // TODO investigate if this is actually needed if there is no mag sensor or if the value stored in the config should be used.
}
return true;
}
bool sensorsAutodetect(sensorAlignmentConfig_t *sensorAlignmentConfig, uint8_t gyroLpf, uint8_t accHardwareToUse, uint8_t magHardwareToUse, uint8_t baroHardwareToUse,
int16_t magDeclinationFromConfig) {
int16_t deg, min;
memset(&acc, 0, sizeof(acc));
memset(&gyro, 0, sizeof(gyro));
#if defined(USE_GYRO_MPU6050) || defined(USE_GYRO_MPU3050) || defined(USE_GYRO_MPU6500) || defined(USE_GYRO_SPI_MPU6500) || defined(USE_GYRO_SPI_MPU6000) || defined(USE_ACC_MPU6050)
const extiConfig_t *extiConfig = selectMPUIntExtiConfig();
mpuDetectionResult_t *mpuDetectionResult = detectMpu(extiConfig);
UNUSED(mpuDetectionResult);
#endif
if (!detectGyro()) {
return false;
}
detectAcc(accHardwareToUse);
detectBaro(baroHardwareToUse);
// Now time to init things, acc first
if (sensors(SENSOR_ACC))
acc.init(&acc);
gyro.init(gyroLpf);
detectMag(magHardwareToUse);
reconfigureAlignment(sensorAlignmentConfig);
// FIXME extract to a method to reduce dependencies, maybe move to sensors_compass.c
if (sensors(SENSOR_MAG)) {
// calculate magnetic declination
deg = magDeclinationFromConfig / 100;
min = magDeclinationFromConfig % 100;
magneticDeclination = (deg + ((float)min * (1.0f / 60.0f))) * 10; // heading is in 0.1deg units
} else {
magneticDeclination = 0.0f; // TODO investigate if this is actually needed if there is no mag sensor or if the value stored in the config should be used.
}
return true;
}
bool sensorsAutodetect(void)
{
memset(&acc, 0, sizeof(acc));
memset(&gyro, 0, sizeof(gyro));
#if defined(USE_GYRO_MPU6050) || defined(USE_GYRO_MPU3050) || defined(USE_GYRO_MPU6500) || defined(USE_GYRO_SPI_MPU6500) || defined(USE_GYRO_SPI_MPU6000) || defined(USE_ACC_MPU6050)
const extiConfig_t *extiConfig = selectMPUIntExtiConfig();
mpuDetectionResult_t *mpuDetectionResult = detectMpu(extiConfig);
UNUSED(mpuDetectionResult);
#endif
if (!detectGyro()) {
return false;
}
gyro.sampleFrequencyHz = gyroConfig()->gyro_sample_hz;
// this is safe because either mpu6050 or mpu3050 or lg3d20 sets it, and in case of fail, we never get here.
gyro.init(&gyro, gyroConfig()->gyro_lpf);
gyroInit();
// the combination of LPF and GYRO_SAMPLE_HZ may be invalid for the gyro, update the configuration to use the sample frequency that was determined for the desired LPF.
gyroConfig()->gyro_sample_hz = gyro.sampleFrequencyHz;
if (detectAcc(sensorSelectionConfig()->acc_hardware)) {
acc.acc_1G = 256; // set default
acc.init(&acc);
}
#ifdef BARO
detectBaro(sensorSelectionConfig()->baro_hardware);
#endif
#ifdef MAG
if (detectMag(sensorSelectionConfig()->mag_hardware)) {
if (!compassInit()) {
sensorsClear(SENSOR_MAG);
}
}
#endif
reconfigureAlignment(sensorAlignmentConfig());
return true;
}
bool sensorsAutodetect(void)
{
memset(&acc, 0, sizeof(acc));
memset(&gyro, 0, sizeof(gyro));
#if defined(USE_GYRO_MPU6050) || defined(USE_GYRO_MPU3050) || defined(USE_GYRO_MPU6500) || defined(USE_GYRO_SPI_MPU6500) || defined(USE_GYRO_SPI_MPU6000) || defined(USE_ACC_MPU6050)
const extiConfig_t *extiConfig = selectMPUIntExtiConfig();
mpuDetectionResult_t *mpuDetectionResult = detectMpu(extiConfig);
UNUSED(mpuDetectionResult);
#endif
if (!detectGyro()) {
return false;
}
// this is safe because either mpu6050 or mpu3050 or lg3d20 sets it, and in case of fail, we never get here.
gyro.init(gyroConfig()->gyro_lpf);
if (detectAcc(sensorSelectionConfig()->acc_hardware)) {
acc.acc_1G = 256; // set default
acc.init(&acc);
}
#ifdef BARO
detectBaro(sensorSelectionConfig()->baro_hardware);
#endif
#ifdef MAG
if (detectMag(sensorSelectionConfig()->mag_hardware)) {
if (!compassInit()) {
sensorsClear(SENSOR_MAG);
}
}
#endif
reconfigureAlignment(sensorAlignmentConfig());
return true;
}
static bool gyroDetect(gyroDev_t *dev, const extiConfig_t *extiConfig)
{
dev->mpuIntExtiConfig = extiConfig;
gyroSensor_e gyroHardware = GYRO_AUTODETECT;
dev->gyroAlign = ALIGN_DEFAULT;
switch(gyroHardware) {
case GYRO_AUTODETECT:
; // fallthrough
case GYRO_MPU6050:
#ifdef USE_GYRO_MPU6050
if (mpu6050GyroDetect(dev)) {
gyroHardware = GYRO_MPU6050;
#ifdef GYRO_MPU6050_ALIGN
dev->gyroAlign = GYRO_MPU6050_ALIGN;
#endif
break;
}
#endif
; // fallthrough
case GYRO_L3G4200D:
#ifdef USE_GYRO_L3G4200D
if (l3g4200dDetect(dev)) {
gyroHardware = GYRO_L3G4200D;
#ifdef GYRO_L3G4200D_ALIGN
dev->gyroAlign = GYRO_L3G4200D_ALIGN;
#endif
break;
}
#endif
; // fallthrough
case GYRO_MPU3050:
#ifdef USE_GYRO_MPU3050
if (mpu3050Detect(dev)) {
gyroHardware = GYRO_MPU3050;
#ifdef GYRO_MPU3050_ALIGN
dev->gyroAlign = GYRO_MPU3050_ALIGN;
#endif
break;
}
#endif
; // fallthrough
case GYRO_L3GD20:
#ifdef USE_GYRO_L3GD20
if (l3gd20Detect(dev)) {
gyroHardware = GYRO_L3GD20;
#ifdef GYRO_L3GD20_ALIGN
dev->gyroAlign = GYRO_L3GD20_ALIGN;
#endif
break;
}
#endif
; // fallthrough
case GYRO_MPU6000:
#ifdef USE_GYRO_SPI_MPU6000
if (mpu6000SpiGyroDetect(dev)) {
gyroHardware = GYRO_MPU6000;
#ifdef GYRO_MPU6000_ALIGN
dev->gyroAlign = GYRO_MPU6000_ALIGN;
#endif
break;
}
#endif
; // fallthrough
case GYRO_MPU6500:
#if defined(USE_GYRO_MPU6500) || defined(USE_GYRO_SPI_MPU6500)
#ifdef USE_GYRO_SPI_MPU6500
if (mpu6500GyroDetect(dev) || mpu6500SpiGyroDetect(dev)) {
#else
if (mpu6500GyroDetect(dev)) {
#endif
gyroHardware = GYRO_MPU6500;
#ifdef GYRO_MPU6500_ALIGN
dev->gyroAlign = GYRO_MPU6500_ALIGN;
#endif
break;
}
#endif
; // fallthrough
case GYRO_FAKE:
#ifdef USE_FAKE_GYRO
if (fakeGyroDetect(dev)) {
gyroHardware = GYRO_FAKE;
break;
}
#endif
; // fallthrough
case GYRO_NONE:
gyroHardware = GYRO_NONE;
}
addBootlogEvent6(BOOT_EVENT_GYRO_DETECTION, BOOT_EVENT_FLAGS_NONE, gyroHardware, 0, 0, 0);
if (gyroHardware == GYRO_NONE) {
return false;
}
detectedSensors[SENSOR_INDEX_GYRO] = gyroHardware;
sensorsSet(SENSOR_GYRO);
return true;
}
bool gyroInit(const gyroConfig_t *gyroConfigToUse)
{
gyroConfig = gyroConfigToUse;
memset(&gyro, 0, sizeof(gyro));
#if defined(USE_GYRO_MPU6050) || defined(USE_GYRO_MPU3050) || defined(USE_GYRO_MPU6500) || defined(USE_GYRO_SPI_MPU6500) || defined(USE_GYRO_SPI_MPU6000) || defined(USE_ACC_MPU6050)
const extiConfig_t *extiConfig = selectMPUIntExtiConfig();
mpuDetect(&gyro.dev);
mpuReset = gyro.dev.mpuConfiguration.reset;
#endif
if (!gyroDetect(&gyro.dev, extiConfig)) {
return false;
}
// After refactoring this function is always called after gyro sampling rate is known, so
// no additional condition is required
// Set gyro sample rate before driver initialisation
gyro.dev.lpf = gyroConfig->gyro_lpf;
gyro.targetLooptime = gyroSetSampleRate(gyroConfig->looptime, gyroConfig->gyro_lpf, gyroConfig->gyroSync, gyroConfig->gyroSyncDenominator);
// driver initialisation
gyro.dev.init(&gyro.dev);
if (gyroConfig->gyro_soft_lpf_hz) {
for (int axis = 0; axis < 3; axis++) {
#ifdef ASYNC_GYRO_PROCESSING
biquadFilterInitLPF(&gyroFilterLPF[axis], gyroConfig->gyro_soft_lpf_hz, getGyroUpdateRate());
#else
biquadFilterInitLPF(&gyroFilterLPF[axis], gyroConfig->gyro_soft_lpf_hz, gyro.targetLooptime);
#endif
}
}
return true;
}
