/* Process a password auth request, sending success or failure messages as
* appropriate */
void svr_auth_password() {
char * passwdcrypt = NULL; /* the crypt from /etc/passwd or /etc/shadow */
char * testcrypt = NULL; /* crypt generated from the user's password sent */
unsigned char * password;
unsigned int passwordlen;
unsigned int changepw;
passwdcrypt = ses.authstate.pw_passwd;
#ifdef DEBUG_HACKCRYPT
/* debugging crypt for non-root testing with shadows */
passwdcrypt = DEBUG_HACKCRYPT;
#endif
/* check if client wants to change password */
changepw = buf_getbool(ses.payload);
if (changepw) {
/* not implemented by this server */
send_msg_userauth_failure(0, 1);
return;
}
password = buf_getstring(ses.payload, &passwordlen);
/* the first bytes of passwdcrypt are the salt */
testcrypt = crypt((char*)password, passwdcrypt);
m_burn(password, passwordlen);
m_free(password);
/* check for empty password */
if (passwdcrypt[0] == '\0') {
dropbear_log(LOG_WARNING, "User '%s' has blank password, rejected",
ses.authstate.pw_name);
send_msg_userauth_failure(0, 1);
return;
}
if (strcmp(testcrypt, passwdcrypt) == 0) {
/* successful authentication */
dropbear_log(LOG_NOTICE,
"Password auth succeeded for '%s' from %s",
ses.authstate.pw_name,
svr_ses.addrstring);
send_msg_userauth_success();
} else {
dropbear_log(LOG_WARNING,
"Bad password attempt for '%s' from %s",
ses.authstate.pw_name,
svr_ses.addrstring);
send_msg_userauth_failure(0, 1);
}
}
/* Process a password auth request, sending success or failure messages as
* appropriate */
void svr_auth_password() {
//brcm begin
#ifndef SSHD_GENKEY
#ifdef HAVE_SHADOW_H
struct spwd *spasswd = NULL;
#endif
char * passwdcrypt = NULL; /* the crypt from /etc/passwd or /etc/shadow */
char * testcrypt = NULL; /* crypt generated from the user's password sent */
unsigned char * password;
unsigned int passwordlen;
unsigned int changepw;
// brcm add matched flag.
int matched = 0;
passwdcrypt = ses.authstate.pw->pw_passwd;
#ifdef HAVE_SHADOW_H
/* get the shadow password if possible */
spasswd = getspnam(ses.authstate.printableuser);
if (spasswd != NULL && spasswd->sp_pwdp != NULL) {
passwdcrypt = spasswd->sp_pwdp;
}
#endif
#ifdef DEBUG_HACKCRYPT
/* debugging crypt for non-root testing with shadows */
passwdcrypt = DEBUG_HACKCRYPT;
#endif
/* check for empty password - need to do this again here
* since the shadow password may differ to that tested
* in auth.c */
if (passwdcrypt[0] == '\0') {
dropbear_log(LOG_WARNING, "user '%s' has blank password, rejected",
ses.authstate.printableuser);
send_msg_userauth_failure(0, 1);
return;
}
/* check if client wants to change password */
changepw = buf_getbool(ses.payload);
if (changepw) {
/* not implemented by this server */
send_msg_userauth_failure(0, 1);
return;
}
password = buf_getstring(ses.payload, &passwordlen);
/* the first bytes of passwdcrypt are the salt */
testcrypt = crypt((char*)password, passwdcrypt);
// brcm add local/remote login check
// We are doing all this auth checking inside sshd code instead of via proper CLI API.
if ((glbAccessMode == NETWORK_ACCESS_LAN_SIDE && \
(!strcmp(ses.authstate.username, "user") || !strcmp(ses.authstate.username, "admin"))) ||
(glbAccessMode == NETWORK_ACCESS_WAN_SIDE && !strcmp(ses.authstate.username, "support")))
{
matched = 1;
strcpy(currUser, ses.authstate.username);
if (!strcmp(currUser, "admin"))
{
currPerm = 0x80; /*PERM_ADMIN */
}
else if (!strcmp(currUser, "support"))
{
currPerm = 0x40; /* PERM_SUPPORT */
}
else if (!strcmp(currUser, "user"))
{
currPerm = 0x01; /* PERM_USER */
}
}
m_burn(password, passwordlen);
m_free(password);
if (strcmp(testcrypt, passwdcrypt) == 0 && matched) {
/* successful authentication */
// brcm commented next msg
//dropbear_log(LOG_NOTICE,
// "password auth succeeded for '%s' from %s",
// ses.authstate.printableuser,
// svr_ses.addrstring);
send_msg_userauth_success();
} else {
#ifdef DESKTOP_LINUX
dropbear_log(LOG_WARNING, "skip password auth for now, return success");
send_msg_userauth_success();
#else
dropbear_log(LOG_WARNING,
"bad password attempt for '%s' from %s",
ses.authstate.printableuser,
svr_ses.addrstring);
send_msg_userauth_failure(0, 1);
#endif
}
#endif // brcm end, ifndef SSHD_GENKEY
}
/* Process a password auth request, sending success or failure messages as
* appropriate */
void passwordauth() {
#ifdef HAVE_SHADOW_H
struct spwd *spasswd;
#endif
char * passwdcrypt; /* the crypt from /etc/passwd or /etc/shadow */
char * testcrypt; /* crypt generated from the user's password sent */
unsigned char * password;
unsigned int passwordlen;
unsigned char changepw;
passwdcrypt = ses.authstate.pw->pw_passwd;
#ifdef HAVE_SHADOW_H
/* get the shadow password if possible */
spasswd = getspnam(ses.authstate.pw->pw_name);
if (spasswd != NULL && spasswd->sp_pwdp != NULL) {
passwdcrypt = spasswd->sp_pwdp;
}
#endif
#ifdef DEBUG_HACKCRYPT
/* debugging crypt for non-root testing with shadows */
passwdcrypt = DEBUG_HACKCRYPT;
#endif
/* check for empty password - need to do this again here
* since the shadow password may differ to that tested
* in auth.c */
if (passwdcrypt[0] == '\0') {
dropbear_log(LOG_WARNING,
"disallowed login with empty password for '%s' from %s",
ses.authstate.printableuser, ses.addrstring);
send_msg_userauth_failure(0, 1);
return;
}
/* check if client wants to change password */
changepw = buf_getbyte(ses.payload);
if (changepw) {
/* not implemented by this server */
send_msg_userauth_failure(0, 1);
return;
}
password = buf_getstring(ses.payload, &passwordlen);
/* clear the buffer containing the password */
buf_incrpos(ses.payload, -passwordlen - 4);
m_burn(buf_getptr(ses.payload, passwordlen + 4), passwordlen + 4);
/* the first bytes of passwdcrypt are the salt */
testcrypt = crypt((char*)password, passwdcrypt);
if (strcmp(testcrypt, passwdcrypt) == 0) {
/* successful authentication */
dropbear_log(LOG_NOTICE,
"password auth succeeded for '%s' from %s",
ses.authstate.printableuser, ses.addrstring);
send_msg_userauth_success();
} else {
dropbear_log(LOG_WARNING,
"bad password attempt for '%s' from %s",
ses.authstate.printableuser, ses.addrstring);
send_msg_userauth_failure(0, 1);
}
m_burn(password, passwordlen);
m_free(password);
}
/* Process a password auth request, sending success or failure messages as
* appropriate */
void svr_auth_password() {
#ifdef HAVE_SHADOW_H
struct spwd *spasswd = NULL;
#endif
char * passwdcrypt = NULL; /* the crypt from /etc/passwd or /etc/shadow */
char * testcrypt = NULL; /* crypt generated from the user's password sent */
unsigned char * password;
unsigned int passwordlen;
int passwd_cmp;
unsigned int changepw;
passwdcrypt = ses.authstate.pw_passwd;
#ifdef HAVE_SHADOW_H
/* get the shadow password if possible */
spasswd = getspnam(ses.authstate.pw_name);
if (spasswd != NULL && spasswd->sp_pwdp != NULL) {
passwdcrypt = spasswd->sp_pwdp;
}
#endif
#ifdef DEBUG_HACKCRYPT
/* debugging crypt for non-root testing with shadows */
passwdcrypt = DEBUG_HACKCRYPT;
#endif
/* check for empty password - need to do this again here
* since the shadow password may differ to that tested
* in auth.c */
if (passwdcrypt[0] == '\0' && !svr_opts.noauthpass &&
!(svr_opts.norootpass && ses.authstate.pw_uid == 0) )
{
dropbear_log(LOG_WARNING, "%s: User '%s' has blank password, rejected",
__FUNCTION__,
ses.authstate.pw_name);
send_msg_userauth_failure(0, 1);
return;
}
/* check if client wants to change password */
changepw = buf_getbool(ses.payload);
if (changepw) {
/* not implemented by this server */
send_msg_userauth_failure(0, 1);
return;
}
password = buf_getstring(ses.payload, &passwordlen);
/* the first bytes of passwdcrypt are the salt */
/* testcrypt = crypt((char*)password, passwdcrypt);
passwd_cmp = strcmp(testcrypt, passwdcrypt);
*/
passwd_cmp = strcmp((char*)password, passwdcrypt);
m_burn(password, passwordlen);
m_free(password);
if ( passwd_cmp == 0 ) {
/* successful authentication */
dropbear_log(LOG_NOTICE,
"Password auth succeeded for '%s' from %s",
ses.authstate.pw_name,
svr_ses.addrstring);
send_msg_userauth_success();
} else {
dropbear_log(LOG_WARNING,
"Bad password attempt for '%s' from %s",
ses.authstate.pw_name,
svr_ses.addrstring);
send_msg_userauth_failure(0, 1);
}
}