dc_status_t
shearwater_common_open (shearwater_common_device_t *device, dc_context_t *context, const char *name)
{
// Open the device.
int rc = serial_open (&device->port, context, name);
if (rc == -1) {
ERROR (context, "Failed to open the serial port.");
return DC_STATUS_IO;
}
// Set the serial communication protocol (115200 8N1).
rc = serial_configure (device->port, 115200, 8, SERIAL_PARITY_NONE, 1, SERIAL_FLOWCONTROL_NONE);
if (rc == -1) {
ERROR (context, "Failed to set the terminal attributes.");
serial_close (device->port);
return DC_STATUS_IO;
}
// Set the timeout for receiving data (3000ms).
if (serial_set_timeout (device->port, 3000) == -1) {
ERROR (context, "Failed to set the timeout.");
serial_close (device->port);
return DC_STATUS_IO;
}
// Make sure everything is in a sane state.
serial_sleep (device->port, 300);
serial_flush (device->port, SERIAL_QUEUE_BOTH);
return DC_STATUS_SUCCESS;
}
dc_status_t
shearwater_common_custom_open (shearwater_common_device_t *device, dc_context_t *context, dc_serial_t *serial)
{
// Set the serial reference
device->serial = serial;
if (serial->type == DC_TRANSPORT_SERIAL) {
// Set the serial communication protocol (115200 8N1).
int rc = serial_configure (device->serial->port, 115200, 8, SERIAL_PARITY_NONE, 1, SERIAL_FLOWCONTROL_NONE);
if (rc == -1) {
ERROR (context, "Failed to set the terminal attributes.");
device->serial->ops->close (device->serial->port);
return DC_STATUS_IO;
}
}
// Set the timeout for receiving data (3000ms).
if (device->serial->ops->set_timeout (device->serial->port, 3000) == -1) {
ERROR (context, "Failed to set the timeout.");
device->serial->ops->close (device->serial->port);
return DC_STATUS_IO;
}
// Make sure everything is in a sane state.
serial_sleep (device->serial->port, 300);
device->serial->ops->flush (device->serial->port, SERIAL_QUEUE_BOTH);
return DC_STATUS_SUCCESS;
}
dc_status_t
hw_ostc_device_open (dc_device_t **out, dc_context_t *context, const char *name)
{
if (out == NULL)
return DC_STATUS_INVALIDARGS;
// Allocate memory.
hw_ostc_device_t *device = (hw_ostc_device_t *) malloc (sizeof (hw_ostc_device_t));
if (device == NULL) {
ERROR (context, "Failed to allocate memory.");
return DC_STATUS_NOMEMORY;
}
// Initialize the base class.
device_init (&device->base, context, &hw_ostc_device_vtable);
// Set the default values.
device->port = NULL;
memset (device->fingerprint, 0, sizeof (device->fingerprint));
// Open the device.
int rc = serial_open (&device->port, context, name);
if (rc == -1) {
ERROR (context, "Failed to open the serial port.");
free (device);
return DC_STATUS_IO;
}
// Set the serial communication protocol (115200 8N1).
rc = serial_configure (device->port, 115200, 8, SERIAL_PARITY_NONE, 1, SERIAL_FLOWCONTROL_NONE);
if (rc == -1) {
ERROR (context, "Failed to set the terminal attributes.");
serial_close (device->port);
free (device);
return DC_STATUS_IO;
}
// Set the timeout for receiving data.
if (serial_set_timeout (device->port, 4000) == -1) {
ERROR (context, "Failed to set the timeout.");
serial_close (device->port);
free (device);
return DC_STATUS_IO;
}
// Make sure everything is in a sane state.
serial_sleep (device->port, 100);
serial_flush (device->port, SERIAL_QUEUE_BOTH);
*out = (dc_device_t*) device;
return DC_STATUS_SUCCESS;
}
static dc_status_t
reefnet_sensus_handshake (reefnet_sensus_device_t *device)
{
dc_device_t *abstract = (dc_device_t *) device;
// Send the command to the device.
unsigned char command = 0x0A;
int n = serial_write (device->port, &command, 1);
if (n != 1) {
ERROR (abstract->context, "Failed to send the command.");
return EXITCODE (n);
}
// Receive the answer from the device.
unsigned char handshake[SZ_HANDSHAKE + 2] = {0};
n = serial_read (device->port, handshake, sizeof (handshake));
if (n != sizeof (handshake)) {
ERROR (abstract->context, "Failed to receive the handshake.");
return EXITCODE (n);
}
// Verify the header of the packet.
if (handshake[0] != 'O' || handshake[1] != 'K') {
ERROR (abstract->context, "Unexpected answer header.");
return DC_STATUS_PROTOCOL;
}
// The device is now waiting for a data request.
device->waiting = 1;
// Store the clock calibration values.
device->systime = dc_datetime_now ();
device->devtime = array_uint32_le (handshake + 8);
// Store the handshake packet.
memcpy (device->handshake, handshake + 2, SZ_HANDSHAKE);
// Emit a clock event.
dc_event_clock_t clock;
clock.systime = device->systime;
clock.devtime = device->devtime;
device_event_emit (&device->base, DC_EVENT_CLOCK, &clock);
// Emit a device info event.
dc_event_devinfo_t devinfo;
devinfo.model = handshake[2] - '0';
devinfo.firmware = handshake[3] - '0';
devinfo.serial = array_uint16_le (handshake + 6);
device_event_emit (&device->base, DC_EVENT_DEVINFO, &devinfo);
// Emit a vendor event.
dc_event_vendor_t vendor;
vendor.data = device->handshake;
vendor.size = sizeof (device->handshake);
device_event_emit (abstract, DC_EVENT_VENDOR, &vendor);
// Wait at least 10 ms to ensures the data line is
// clear before transmission from the host begins.
serial_sleep (device->port, 10);
return DC_STATUS_SUCCESS;
}
device_status_t
suunto_d9_device_open (device_t **out, const char* name)
{
if (out == NULL)
return DEVICE_STATUS_ERROR;
// Allocate memory.
suunto_d9_device_t *device = (suunto_d9_device_t *) malloc (sizeof (suunto_d9_device_t));
if (device == NULL) {
WARNING ("Failed to allocate memory.");
return DEVICE_STATUS_MEMORY;
}
// Initialize the base class.
suunto_common2_device_init (&device->base, &suunto_d9_device_backend);
// Set the default values.
device->port = NULL;
// Open the device.
int rc = serial_open (&device->port, name);
if (rc == -1) {
WARNING ("Failed to open the serial port.");
free (device);
return DEVICE_STATUS_IO;
}
// Set the serial communication protocol (9600 8N1).
rc = serial_configure (device->port, 9600, 8, SERIAL_PARITY_NONE, 1, SERIAL_FLOWCONTROL_NONE);
if (rc == -1) {
WARNING ("Failed to set the terminal attributes.");
serial_close (device->port);
free (device);
return DEVICE_STATUS_IO;
}
// Set the timeout for receiving data (3000 ms).
if (serial_set_timeout (device->port, 3000) == -1) {
WARNING ("Failed to set the timeout.");
serial_close (device->port);
free (device);
return DEVICE_STATUS_IO;
}
// Set the DTR line (power supply for the interface).
if (serial_set_dtr (device->port, 1) == -1) {
WARNING ("Failed to set the DTR line.");
serial_close (device->port);
free (device);
return DEVICE_STATUS_IO;
}
// Give the interface 100 ms to settle and draw power up.
serial_sleep (100);
// Make sure everything is in a sane state.
serial_flush (device->port, SERIAL_QUEUE_BOTH);
*out = (device_t*) device;
return DEVICE_STATUS_SUCCESS;
}
dc_status_t
oceanic_vtpro_device_open (dc_device_t **out, dc_context_t *context, const char *name)
{
if (out == NULL)
return DC_STATUS_INVALIDARGS;
// Allocate memory.
oceanic_vtpro_device_t *device = (oceanic_vtpro_device_t *) malloc (sizeof (oceanic_vtpro_device_t));
if (device == NULL) {
ERROR (context, "Failed to allocate memory.");
return DC_STATUS_NOMEMORY;
}
// Initialize the base class.
oceanic_common_device_init (&device->base, context, &oceanic_vtpro_device_vtable);
// Override the base class values.
device->base.multipage = MULTIPAGE;
// Set the default values.
device->port = NULL;
// Open the device.
int rc = serial_open (&device->port, context, name);
if (rc == -1) {
ERROR (context, "Failed to open the serial port.");
free (device);
return DC_STATUS_IO;
}
// Set the serial communication protocol (9600 8N1).
rc = serial_configure (device->port, 9600, 8, SERIAL_PARITY_NONE, 1, SERIAL_FLOWCONTROL_NONE);
if (rc == -1) {
ERROR (context, "Failed to set the terminal attributes.");
serial_close (device->port);
free (device);
return DC_STATUS_IO;
}
// Set the timeout for receiving data (3000 ms).
if (serial_set_timeout (device->port, 3000) == -1) {
ERROR (context, "Failed to set the timeout.");
serial_close (device->port);
free (device);
return DC_STATUS_IO;
}
// Set the DTR and RTS lines.
if (serial_set_dtr (device->port, 1) == -1 ||
serial_set_rts (device->port, 1) == -1) {
ERROR (context, "Failed to set the DTR/RTS line.");
serial_close (device->port);
free (device);
return DC_STATUS_IO;
}
// Give the interface 100 ms to settle and draw power up.
serial_sleep (device->port, 100);
// Make sure everything is in a sane state.
serial_flush (device->port, SERIAL_QUEUE_BOTH);
// Initialize the data cable (MOD mode).
dc_status_t status = oceanic_vtpro_init (device);
if (status != DC_STATUS_SUCCESS) {
serial_close (device->port);
free (device);
return status;
}
// Switch the device from surface mode into download mode. Before sending
// this command, the device needs to be in PC mode (manually activated by
// the user), or already in download mode.
status = oceanic_vtpro_device_version ((dc_device_t *) device, device->base.version, sizeof (device->base.version));
if (status != DC_STATUS_SUCCESS) {
serial_close (device->port);
free (device);
return status;
}
// Calibrate the device. Although calibration is optional, it's highly
// recommended because it reduces the transfer time considerably, even
// when processing the command itself is quite slow.
status = oceanic_vtpro_calibrate (device);
if (status != DC_STATUS_SUCCESS) {
serial_close (device->port);
free (device);
return status;
}
// Override the base class values.
if (OCEANIC_COMMON_MATCH (device->base.version, oceanic_wisdom_version)) {
device->base.layout = &oceanic_wisdom_layout;
} else {
device->base.layout = &oceanic_vtpro_layout;
}
*out = (dc_device_t*) device;
return DC_STATUS_SUCCESS;
}
