Пример #1
0
void SoftAVC::onPortFlushCompleted(OMX_U32 portIndex) {
    /* Once the output buffers are flushed, ignore any buffers that are held in decoder */
    if (kOutputPortIndex == portIndex) {
        setFlushMode();

        while (true) {
            ivd_video_decode_ip_t s_dec_ip;
            ivd_video_decode_op_t s_dec_op;
            IV_API_CALL_STATUS_T status;
            size_t sizeY, sizeUV;

            setDecodeArgs(&s_dec_ip, &s_dec_op, NULL, NULL, 0);

            status = ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);
            if (0 == s_dec_op.u4_output_present) {
                resetPlugin();
                break;
            }
        }
    }
}
Пример #2
0
void SoftHEVC::onPortFlushCompleted(OMX_U32 portIndex) {
    /* Once the output buffers are flushed, ignore any buffers that are held in decoder */
    if (kOutputPortIndex == portIndex) {
        setFlushMode();

        /* Allocate a picture buffer to flushed data */
        uint32_t displayStride = outputBufferWidth();
        uint32_t displayHeight = outputBufferHeight();

        uint32_t bufferSize = displayStride * displayHeight * 3 / 2;
        mFlushOutBuffer = (uint8_t *)memalign(128, bufferSize);
        if (NULL == mFlushOutBuffer) {
            ALOGE("Could not allocate flushOutputBuffer of size %u", bufferSize);
            return;
        }

        while (true) {
            ivd_video_decode_ip_t s_dec_ip;
            ivd_video_decode_op_t s_dec_op;
            IV_API_CALL_STATUS_T status;
            size_t sizeY, sizeUV;

            setDecodeArgs(&s_dec_ip, &s_dec_op, NULL, NULL, 0);

            status = ivdec_api_function(mCodecCtx, (void *)&s_dec_ip,
                    (void *)&s_dec_op);
            if (0 == s_dec_op.u4_output_present) {
                resetPlugin();
                break;
            }
        }

        if (mFlushOutBuffer) {
            free(mFlushOutBuffer);
            mFlushOutBuffer = NULL;
        }

    }
}
Пример #3
0
void SoftHEVC::onQueueFilled(OMX_U32 portIndex) {
    UNUSED(portIndex);

    if (mSignalledError) {
        return;
    }
    if (mOutputPortSettingsChange != NONE) {
        return;
    }

    if (NULL == mCodecCtx) {
        if (OK != initDecoder()) {
            ALOGE("Failed to initialize decoder");
            notify(OMX_EventError, OMX_ErrorUnsupportedSetting, 0, NULL);
            mSignalledError = true;
            return;
        }
    }
    if (outputBufferWidth() != mStride) {
        /* Set the run-time (dynamic) parameters */
        mStride = outputBufferWidth();
        setParams(mStride);
    }

    List<BufferInfo *> &inQueue = getPortQueue(kInputPortIndex);
    List<BufferInfo *> &outQueue = getPortQueue(kOutputPortIndex);

    while (!outQueue.empty()) {
        BufferInfo *inInfo;
        OMX_BUFFERHEADERTYPE *inHeader;

        BufferInfo *outInfo;
        OMX_BUFFERHEADERTYPE *outHeader;
        size_t timeStampIx;

        inInfo = NULL;
        inHeader = NULL;

        if (!mIsInFlush) {
            if (!inQueue.empty()) {
                inInfo = *inQueue.begin();
                inHeader = inInfo->mHeader;
            } else {
                break;
            }
        }

        outInfo = *outQueue.begin();
        outHeader = outInfo->mHeader;
        outHeader->nFlags = 0;
        outHeader->nTimeStamp = 0;
        outHeader->nOffset = 0;

        if (inHeader != NULL && (inHeader->nFlags & OMX_BUFFERFLAG_EOS)) {
            mReceivedEOS = true;
            if (inHeader->nFilledLen == 0) {
                inQueue.erase(inQueue.begin());
                inInfo->mOwnedByUs = false;
                notifyEmptyBufferDone(inHeader);
                inHeader = NULL;
                setFlushMode();
            }
        }

        /* Get a free slot in timestamp array to hold input timestamp */
        {
            size_t i;
            timeStampIx = 0;
            for (i = 0; i < MAX_TIME_STAMPS; i++) {
                if (!mTimeStampsValid[i]) {
                    timeStampIx = i;
                    break;
                }
            }
            if (inHeader != NULL) {
                mTimeStampsValid[timeStampIx] = true;
                mTimeStamps[timeStampIx] = inHeader->nTimeStamp;
            }
        }

        {
            ivd_video_decode_ip_t s_dec_ip;
            ivd_video_decode_op_t s_dec_op;
            WORD32 timeDelay, timeTaken;
            size_t sizeY, sizeUV;

            if (!setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx)) {
                ALOGE("Decoder arg setup failed");
                notify(OMX_EventError, OMX_ErrorUndefined, 0, NULL);
                mSignalledError = true;
                return;
            }

            GETTIME(&mTimeStart, NULL);
            /* Compute time elapsed between end of previous decode()
             * to start of current decode() */
            TIME_DIFF(mTimeEnd, mTimeStart, timeDelay);

            IV_API_CALL_STATUS_T status;
            status = ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);

            bool unsupportedResolution =
                (IVD_STREAM_WIDTH_HEIGHT_NOT_SUPPORTED == (s_dec_op.u4_error_code & 0xFF));

            /* Check for unsupported dimensions */
            if (unsupportedResolution) {
                ALOGE("Unsupported resolution : %dx%d", mWidth, mHeight);
                notify(OMX_EventError, OMX_ErrorUnsupportedSetting, 0, NULL);
                mSignalledError = true;
                return;
            }

            bool allocationFailed = (IVD_MEM_ALLOC_FAILED == (s_dec_op.u4_error_code & 0xFF));
            if (allocationFailed) {
                ALOGE("Allocation failure in decoder");
                notify(OMX_EventError, OMX_ErrorUnsupportedSetting, 0, NULL);
                mSignalledError = true;
                return;
            }

            bool resChanged = (IVD_RES_CHANGED == (s_dec_op.u4_error_code & 0xFF));

            getVUIParams();

            GETTIME(&mTimeEnd, NULL);
            /* Compute time taken for decode() */
            TIME_DIFF(mTimeStart, mTimeEnd, timeTaken);

            ALOGV("timeTaken=%6d delay=%6d numBytes=%6d", timeTaken, timeDelay,
                   s_dec_op.u4_num_bytes_consumed);
            if (s_dec_op.u4_frame_decoded_flag && !mFlushNeeded) {
                mFlushNeeded = true;
            }

            if ((inHeader != NULL) && (1 != s_dec_op.u4_frame_decoded_flag)) {
                /* If the input did not contain picture data, then ignore
                 * the associated timestamp */
                mTimeStampsValid[timeStampIx] = false;
            }

            // If the decoder is in the changing resolution mode and there is no output present,
            // that means the switching is done and it's ready to reset the decoder and the plugin.
            if (mChangingResolution && !s_dec_op.u4_output_present) {
                mChangingResolution = false;
                resetDecoder();
                resetPlugin();
                mStride = outputBufferWidth();
                setParams(mStride);
                continue;
            }

            if (resChanged) {
                mChangingResolution = true;
                if (mFlushNeeded) {
                    setFlushMode();
                }
                continue;
            }

            // Combine the resolution change and coloraspects change in one PortSettingChange event
            // if necessary.
            if ((0 < s_dec_op.u4_pic_wd) && (0 < s_dec_op.u4_pic_ht)) {
                uint32_t width = s_dec_op.u4_pic_wd;
                uint32_t height = s_dec_op.u4_pic_ht;
                bool portWillReset = false;
                handlePortSettingsChange(&portWillReset, width, height);

                if (portWillReset) {
                    resetDecoder();
                    resetPlugin();
                    return;
                }
            } else if (mUpdateColorAspects) {
                notify(OMX_EventPortSettingsChanged, kOutputPortIndex,
                    kDescribeColorAspectsIndex, NULL);
                mUpdateColorAspects = false;
                return;
            }

            if (s_dec_op.u4_output_present) {
                outHeader->nFilledLen = (outputBufferWidth() * outputBufferHeight() * 3) / 2;

                outHeader->nTimeStamp = mTimeStamps[s_dec_op.u4_ts];
                mTimeStampsValid[s_dec_op.u4_ts] = false;

                outInfo->mOwnedByUs = false;
                outQueue.erase(outQueue.begin());
                outInfo = NULL;
                notifyFillBufferDone(outHeader);
                outHeader = NULL;
            } else if (mIsInFlush) {
                /* If in flush mode and no output is returned by the codec,
                 * then come out of flush mode */
                mIsInFlush = false;

                /* If EOS was recieved on input port and there is no output
                 * from the codec, then signal EOS on output port */
                if (mReceivedEOS) {
                    outHeader->nFilledLen = 0;
                    outHeader->nFlags |= OMX_BUFFERFLAG_EOS;

                    outInfo->mOwnedByUs = false;
                    outQueue.erase(outQueue.begin());
                    outInfo = NULL;
                    notifyFillBufferDone(outHeader);
                    outHeader = NULL;
                    resetPlugin();
                }
            }
        }

        /* If input EOS is seen and decoder is not in flush mode,
         * set the decoder in flush mode.
         * There can be a case where EOS is sent along with last picture data
         * In that case, only after decoding that input data, decoder has to be
         * put in flush. This case is handled here  */

        if (mReceivedEOS && !mIsInFlush) {
            setFlushMode();
        }

        // TODO: Handle more than one picture data
        if (inHeader != NULL) {
            inInfo->mOwnedByUs = false;
            inQueue.erase(inQueue.begin());
            inInfo = NULL;
            notifyEmptyBufferDone(inHeader);
            inHeader = NULL;
        }
    }
}
Пример #4
0
void SoftAVC::onQueueFilled(OMX_U32 portIndex) {
    UNUSED(portIndex);

    if (mSignalledError) {
        return;
    }
    if (mOutputPortSettingsChange != NONE) {
        return;
    }

    List<BufferInfo *> &inQueue = getPortQueue(kInputPortIndex);
    List<BufferInfo *> &outQueue = getPortQueue(kOutputPortIndex);

    /* If input EOS is seen and decoder is not in flush mode,
     * set the decoder in flush mode.
     * There can be a case where EOS is sent along with last picture data
     * In that case, only after decoding that input data, decoder has to be
     * put in flush. This case is handled here  */

    if (mReceivedEOS && !mIsInFlush) {
        setFlushMode();
    }

    while (!outQueue.empty()) {
        BufferInfo *inInfo;
        OMX_BUFFERHEADERTYPE *inHeader;

        BufferInfo *outInfo;
        OMX_BUFFERHEADERTYPE *outHeader;
        size_t timeStampIx;

        inInfo = NULL;
        inHeader = NULL;

        if (!mIsInFlush) {
            if (!inQueue.empty()) {
                inInfo = *inQueue.begin();
                inHeader = inInfo->mHeader;
                if (inHeader == NULL) {
                    inQueue.erase(inQueue.begin());
                    inInfo->mOwnedByUs = false;
                    continue;
                }
            } else {
                break;
            }
        }

        outInfo = *outQueue.begin();
        outHeader = outInfo->mHeader;
        outHeader->nFlags = 0;
        outHeader->nTimeStamp = 0;
        outHeader->nOffset = 0;

        if (inHeader != NULL) {
            if (inHeader->nFilledLen == 0) {
                inQueue.erase(inQueue.begin());
                inInfo->mOwnedByUs = false;
                notifyEmptyBufferDone(inHeader);

                if (!(inHeader->nFlags & OMX_BUFFERFLAG_EOS)) {
                    continue;
                }

                mReceivedEOS = true;
                inHeader = NULL;
                setFlushMode();
            } else if (inHeader->nFlags & OMX_BUFFERFLAG_EOS) {
                mReceivedEOS = true;
            }
        }

        // When there is an init required and the decoder is not in flush mode,
        // update output port's definition and reinitialize decoder.
        if (mInitNeeded && !mIsInFlush) {
            bool portWillReset = false;

            status_t err = reInitDecoder(mNewWidth, mNewHeight);
            if (err != OK) {
                notify(OMX_EventError, OMX_ErrorUnsupportedSetting, err, NULL);
                mSignalledError = true;
                return;
            }

            handlePortSettingsChange(&portWillReset, mNewWidth, mNewHeight);
            return;
        }

        /* Get a free slot in timestamp array to hold input timestamp */
        {
            size_t i;
            timeStampIx = 0;
            for (i = 0; i < MAX_TIME_STAMPS; i++) {
                if (!mTimeStampsValid[i]) {
                    timeStampIx = i;
                    break;
                }
            }
            if (inHeader != NULL) {
                mTimeStampsValid[timeStampIx] = true;
                mTimeStamps[timeStampIx] = inHeader->nTimeStamp;
            }
        }

        {
            ivd_video_decode_ip_t s_dec_ip;
            ivd_video_decode_op_t s_dec_op;
            WORD32 timeDelay, timeTaken;
            size_t sizeY, sizeUV;

            setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx);
            // If input dump is enabled, then write to file
            DUMP_TO_FILE(mInFile, s_dec_ip.pv_stream_buffer, s_dec_ip.u4_num_Bytes);

            GETTIME(&mTimeStart, NULL);
            /* Compute time elapsed between end of previous decode()
             * to start of current decode() */
            TIME_DIFF(mTimeEnd, mTimeStart, timeDelay);

            IV_API_CALL_STATUS_T status;
            status = ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);

            bool unsupportedDimensions =
                (IVD_STREAM_WIDTH_HEIGHT_NOT_SUPPORTED == (s_dec_op.u4_error_code & 0xFF));
            bool resChanged = (IVD_RES_CHANGED == (s_dec_op.u4_error_code & 0xFF));
            bool unsupportedLevel = (IH264D_UNSUPPORTED_LEVEL == (s_dec_op.u4_error_code & 0xFF));

            GETTIME(&mTimeEnd, NULL);
            /* Compute time taken for decode() */
            TIME_DIFF(mTimeStart, mTimeEnd, timeTaken);

            PRINT_TIME("timeTaken=%6d delay=%6d numBytes=%6d", timeTaken, timeDelay,
                   s_dec_op.u4_num_bytes_consumed);
            if (s_dec_op.u4_frame_decoded_flag && !mFlushNeeded) {
                mFlushNeeded = true;
            }

            if ((inHeader != NULL) && (1 != s_dec_op.u4_frame_decoded_flag)) {
                /* If the input did not contain picture data, then ignore
                 * the associated timestamp */
                mTimeStampsValid[timeStampIx] = false;
            }


            // This is needed to handle CTS DecoderTest testCodecResetsH264WithoutSurface,
            // which is not sending SPS/PPS after port reconfiguration and flush to the codec.
            if (unsupportedDimensions && !mFlushNeeded) {
                bool portWillReset = false;
                mNewWidth = s_dec_op.u4_pic_wd;
                mNewHeight = s_dec_op.u4_pic_ht;

                status_t err = reInitDecoder(mNewWidth, mNewHeight);
                if (err != OK) {
                    notify(OMX_EventError, OMX_ErrorUnsupportedSetting, err, NULL);
                    mSignalledError = true;
                    return;
                }

                handlePortSettingsChange(&portWillReset, mNewWidth, mNewHeight);

                setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx);

                ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);
                return;
            }

            if (unsupportedLevel && !mFlushNeeded) {

                mNewLevel = 51;

                status_t err = reInitDecoder(mNewWidth, mNewHeight);
                if (err != OK) {
                    notify(OMX_EventError, OMX_ErrorUnsupportedSetting, err, NULL);
                    mSignalledError = true;
                    return;
                }

                setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx);

                ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);
                return;
            }

            // If the decoder is in the changing resolution mode and there is no output present,
            // that means the switching is done and it's ready to reset the decoder and the plugin.
            if (mChangingResolution && !s_dec_op.u4_output_present) {
                mChangingResolution = false;
                resetDecoder();
                resetPlugin();
                continue;
            }

            if (unsupportedDimensions || resChanged) {
                mChangingResolution = true;
                if (mFlushNeeded) {
                    setFlushMode();
                }

                if (unsupportedDimensions) {
                    mNewWidth = s_dec_op.u4_pic_wd;
                    mNewHeight = s_dec_op.u4_pic_ht;
                    mInitNeeded = true;
                }
                continue;
            }

            if (unsupportedLevel) {

                if (mFlushNeeded) {
                    setFlushMode();
                }

                mNewLevel = 51;
                mInitNeeded = true;
                continue;
            }

            if ((0 < s_dec_op.u4_pic_wd) && (0 < s_dec_op.u4_pic_ht)) {
                uint32_t width = s_dec_op.u4_pic_wd;
                uint32_t height = s_dec_op.u4_pic_ht;
                bool portWillReset = false;
                handlePortSettingsChange(&portWillReset, width, height);

                if (portWillReset) {
                    resetDecoder();
                    return;
                }
            }

            if (s_dec_op.u4_output_present) {
                outHeader->nFilledLen = (outputBufferWidth() * outputBufferHeight() * 3) / 2;

                outHeader->nTimeStamp = mTimeStamps[s_dec_op.u4_ts];
                mTimeStampsValid[s_dec_op.u4_ts] = false;

                outInfo->mOwnedByUs = false;
                outQueue.erase(outQueue.begin());
                outInfo = NULL;
                notifyFillBufferDone(outHeader);
                outHeader = NULL;
            } else {
                /* If in flush mode and no output is returned by the codec,
                 * then come out of flush mode */
                mIsInFlush = false;

                /* If EOS was recieved on input port and there is no output
                 * from the codec, then signal EOS on output port */
                if (mReceivedEOS) {
                    outHeader->nFilledLen = 0;
                    outHeader->nFlags |= OMX_BUFFERFLAG_EOS;

                    outInfo->mOwnedByUs = false;
                    outQueue.erase(outQueue.begin());
                    outInfo = NULL;
                    notifyFillBufferDone(outHeader);
                    outHeader = NULL;
                    resetPlugin();
                }
            }
        }

        if (inHeader != NULL) {
            inInfo->mOwnedByUs = false;
            inQueue.erase(inQueue.begin());
            inInfo = NULL;
            notifyEmptyBufferDone(inHeader);
            inHeader = NULL;
        }
    }
}
Пример #5
0
void SoftMPEG2::onQueueFilled(OMX_U32 portIndex) {
    UNUSED(portIndex);

    if (mOutputPortSettingsChange != NONE) {
        return;
    }

    List<BufferInfo *> &inQueue = getPortQueue(kInputPortIndex);
    List<BufferInfo *> &outQueue = getPortQueue(kOutputPortIndex);

    /* If input EOS is seen and decoder is not in flush mode,
     * set the decoder in flush mode.
     * There can be a case where EOS is sent along with last picture data
     * In that case, only after decoding that input data, decoder has to be
     * put in flush. This case is handled here  */

    if (mReceivedEOS && !mIsInFlush) {
        setFlushMode();
    }

    while (!outQueue.empty()) {
        BufferInfo *inInfo;
        OMX_BUFFERHEADERTYPE *inHeader;

        BufferInfo *outInfo;
        OMX_BUFFERHEADERTYPE *outHeader;
        size_t timeStampIx;

        inInfo = NULL;
        inHeader = NULL;

        if (!mIsInFlush) {
            if (!inQueue.empty()) {
                inInfo = *inQueue.begin();
                inHeader = inInfo->mHeader;
            } else {
                break;
            }
        }

        outInfo = *outQueue.begin();
        outHeader = outInfo->mHeader;
        outHeader->nFlags = 0;
        outHeader->nTimeStamp = 0;
        outHeader->nOffset = 0;

        if (inHeader != NULL && (inHeader->nFlags & OMX_BUFFERFLAG_EOS)) {
            mReceivedEOS = true;
            if (inHeader->nFilledLen == 0) {
                inQueue.erase(inQueue.begin());
                inInfo->mOwnedByUs = false;
                notifyEmptyBufferDone(inHeader);
                inHeader = NULL;
                setFlushMode();
            }
        }

        // When there is an init required and the decoder is not in flush mode,
        // update output port's definition and reinitialize decoder.
        if (mInitNeeded && !mIsInFlush) {
            bool portWillReset = false;
            handlePortSettingsChange(&portWillReset, mNewWidth, mNewHeight);

            CHECK_EQ(reInitDecoder(), (status_t)OK);
            return;
        }

        /* Get a free slot in timestamp array to hold input timestamp */
        {
            size_t i;
            timeStampIx = 0;
            for (i = 0; i < MAX_TIME_STAMPS; i++) {
                if (!mTimeStampsValid[i]) {
                    timeStampIx = i;
                    break;
                }
            }
            if (inHeader != NULL) {
                mTimeStampsValid[timeStampIx] = true;
                mTimeStamps[timeStampIx] = inHeader->nTimeStamp;
            }
        }

        {
            ivd_video_decode_ip_t s_dec_ip;
            ivd_video_decode_op_t s_dec_op;
            WORD32 timeDelay, timeTaken;
            size_t sizeY, sizeUV;

            setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx);
            // If input dump is enabled, then write to file
            DUMP_TO_FILE(mInFile, s_dec_ip.pv_stream_buffer, s_dec_ip.u4_num_Bytes);

            if (s_dec_ip.u4_num_Bytes > 0) {
                char *ptr = (char *)s_dec_ip.pv_stream_buffer;
            }

            GETTIME(&mTimeStart, NULL);
            /* Compute time elapsed between end of previous decode()
             * to start of current decode() */
            TIME_DIFF(mTimeEnd, mTimeStart, timeDelay);

            IV_API_CALL_STATUS_T status;
            status = ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);

            bool unsupportedDimensions = (IMPEG2D_UNSUPPORTED_DIMENSIONS == s_dec_op.u4_error_code);
            bool resChanged = (IVD_RES_CHANGED == (s_dec_op.u4_error_code & 0xFF));

            GETTIME(&mTimeEnd, NULL);
            /* Compute time taken for decode() */
            TIME_DIFF(mTimeStart, mTimeEnd, timeTaken);

            ALOGV("timeTaken=%6d delay=%6d numBytes=%6d", timeTaken, timeDelay,
                   s_dec_op.u4_num_bytes_consumed);
            if (s_dec_op.u4_frame_decoded_flag && !mFlushNeeded) {
                mFlushNeeded = true;
            }

            if ((inHeader != NULL) && (1 != s_dec_op.u4_frame_decoded_flag)) {
                /* If the input did not contain picture data, then ignore
                 * the associated timestamp */
                mTimeStampsValid[timeStampIx] = false;
            }

            // This is needed to handle CTS DecoderTest testCodecResetsMPEG2WithoutSurface,
            // which is not sending SPS/PPS after port reconfiguration and flush to the codec.
            if (unsupportedDimensions && !mFlushNeeded) {
                bool portWillReset = false;
                handlePortSettingsChange(&portWillReset, s_dec_op.u4_pic_wd, s_dec_op.u4_pic_ht);

                CHECK_EQ(reInitDecoder(), (status_t)OK);

                setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx);

                ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);
                return;
            }

            // If the decoder is in the changing resolution mode and there is no output present,
            // that means the switching is done and it's ready to reset the decoder and the plugin.
            if (mChangingResolution && !s_dec_op.u4_output_present) {
                mChangingResolution = false;
                resetDecoder();
                resetPlugin();
                continue;
            }

            if (unsupportedDimensions || resChanged) {
                mChangingResolution = true;
                if (mFlushNeeded) {
                    setFlushMode();
                }

                if (unsupportedDimensions) {
                    mNewWidth = s_dec_op.u4_pic_wd;
                    mNewHeight = s_dec_op.u4_pic_ht;
                    mInitNeeded = true;
                }
                continue;
            }

            if ((0 < s_dec_op.u4_pic_wd) && (0 < s_dec_op.u4_pic_ht)) {
                uint32_t width = s_dec_op.u4_pic_wd;
                uint32_t height = s_dec_op.u4_pic_ht;
                bool portWillReset = false;
                handlePortSettingsChange(&portWillReset, width, height);

                if (portWillReset) {
                    resetDecoder();
                    return;
                }
            }

            if (s_dec_op.u4_output_present) {
                size_t timeStampIdx;
                outHeader->nFilledLen = (mWidth * mHeight * 3) / 2;

                timeStampIdx = getMinTimestampIdx(mTimeStamps, mTimeStampsValid);
                outHeader->nTimeStamp = mTimeStamps[timeStampIdx];
                mTimeStampsValid[timeStampIdx] = false;

                /* mWaitForI waits for the first I picture. Once made FALSE, it
                   has to remain false till explicitly set to TRUE. */
                mWaitForI = mWaitForI && !(IV_I_FRAME == s_dec_op.e_pic_type);

                if (mWaitForI) {
                    s_dec_op.u4_output_present = false;
                } else {
                    ALOGV("Output timestamp: %lld, res: %ux%u",
                            (long long)outHeader->nTimeStamp, mWidth, mHeight);
                    DUMP_TO_FILE(mOutFile, outHeader->pBuffer, outHeader->nFilledLen);
                    outInfo->mOwnedByUs = false;
                    outQueue.erase(outQueue.begin());
                    outInfo = NULL;
                    notifyFillBufferDone(outHeader);
                    outHeader = NULL;
                }
            } else {
                /* If in flush mode and no output is returned by the codec,
                 * then come out of flush mode */
                mIsInFlush = false;

                /* If EOS was recieved on input port and there is no output
                 * from the codec, then signal EOS on output port */
                if (mReceivedEOS) {
                    outHeader->nFilledLen = 0;
                    outHeader->nFlags |= OMX_BUFFERFLAG_EOS;

                    outInfo->mOwnedByUs = false;
                    outQueue.erase(outQueue.begin());
                    outInfo = NULL;
                    notifyFillBufferDone(outHeader);
                    outHeader = NULL;
                    resetPlugin();
                }
            }
        }

        // TODO: Handle more than one picture data
        if (inHeader != NULL) {
            inInfo->mOwnedByUs = false;
            inQueue.erase(inQueue.begin());
            inInfo = NULL;
            notifyEmptyBufferDone(inHeader);
            inHeader = NULL;
        }
    }
}
Пример #6
0
void SoftHEVC::onQueueFilled(OMX_U32 portIndex) {
    UNUSED(portIndex);

    if (mOutputPortSettingsChange != NONE) {
        return;
    }

    List<BufferInfo *> &inQueue = getPortQueue(kInputPortIndex);
    List<BufferInfo *> &outQueue = getPortQueue(kOutputPortIndex);

    /* If input EOS is seen and decoder is not in flush mode,
     * set the decoder in flush mode.
     * There can be a case where EOS is sent along with last picture data
     * In that case, only after decoding that input data, decoder has to be
     * put in flush. This case is handled here  */

    if (mReceivedEOS && !mIsInFlush) {
        setFlushMode();
    }

    while (!outQueue.empty()) {
        BufferInfo *inInfo;
        OMX_BUFFERHEADERTYPE *inHeader;

        BufferInfo *outInfo;
        OMX_BUFFERHEADERTYPE *outHeader;
        size_t timeStampIx;

        inInfo = NULL;
        inHeader = NULL;

        if (!mIsInFlush) {
            if (!inQueue.empty()) {
                inInfo = *inQueue.begin();
                inHeader = inInfo->mHeader;
            } else {
                break;
            }
        }

        outInfo = *outQueue.begin();
        outHeader = outInfo->mHeader;
        outHeader->nFlags = 0;
        outHeader->nTimeStamp = 0;
        outHeader->nOffset = 0;

        if (inHeader != NULL && (inHeader->nFlags & OMX_BUFFERFLAG_EOS)) {
            ALOGD("EOS seen on input");
            mReceivedEOS = true;
            if (inHeader->nFilledLen == 0) {
                inQueue.erase(inQueue.begin());
                inInfo->mOwnedByUs = false;
                notifyEmptyBufferDone(inHeader);
                inHeader = NULL;
                setFlushMode();
            }
        }

        // When there is an init required and the decoder is not in flush mode,
        // update output port's definition and reinitialize decoder.
        if (mInitNeeded && !mIsInFlush) {
            bool portWillReset = false;
            handlePortSettingsChange(&portWillReset, mNewWidth, mNewHeight);

            CHECK_EQ(reInitDecoder(), (status_t)OK);
            return;
        }

        /* Get a free slot in timestamp array to hold input timestamp */
        {
            size_t i;
            timeStampIx = 0;
            for (i = 0; i < MAX_TIME_STAMPS; i++) {
                if (!mTimeStampsValid[i]) {
                    timeStampIx = i;
                    break;
                }
            }
            if (inHeader != NULL) {
                mTimeStampsValid[timeStampIx] = true;
                mTimeStamps[timeStampIx] = inHeader->nTimeStamp;
            }
        }

        {
            ivd_video_decode_ip_t s_dec_ip;
            ivd_video_decode_op_t s_dec_op;
            WORD32 timeDelay, timeTaken;
            size_t sizeY, sizeUV;

            setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx);

            GETTIME(&mTimeStart, NULL);
            /* Compute time elapsed between end of previous decode()
             * to start of current decode() */
            TIME_DIFF(mTimeEnd, mTimeStart, timeDelay);

            IV_API_CALL_STATUS_T status;
            status = ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);

            //Fixed 
            if ( mWidth != s_dec_op.u4_pic_wd || mHeight != s_dec_op.u4_pic_ht) {                 
                ALOGE("mWidth %d, mHeight %d -> mNewWidth %d, mNewHeight %d", mWidth, mHeight, mNewWidth, mNewHeight);
                if(mFlushOutBuffer) {
                    ivd_aligned_free(mFlushOutBuffer);
                    mFlushOutBuffer = NULL;
                }
                
                uint32_t bufferSize = s_dec_op.u4_pic_wd * s_dec_op.u4_pic_ht * 3 / 2;
                mFlushOutBuffer = (uint8_t *)ivd_aligned_malloc(128, bufferSize);
                if (NULL == mFlushOutBuffer) {
                    ALOGE("Could not allocate flushOutputBuffer of size %zu", bufferSize);
                    return;
                }
                ALOGE("re-alloc mFlushOutBuffer");
            }

            // FIXME: Compare |status| to IHEVCD_UNSUPPORTED_DIMENSIONS, which is not one of the
            // IV_API_CALL_STATUS_T, seems be wrong. But this is what the decoder returns right now.
            // The decoder should be fixed so that |u4_error_code| instead of |status| returns
            // IHEVCD_UNSUPPORTED_DIMENSIONS.
            bool unsupportedDimensions =
                ((IHEVCD_UNSUPPORTED_DIMENSIONS == status)
                    || (IHEVCD_UNSUPPORTED_DIMENSIONS == s_dec_op.u4_error_code));
            bool resChanged = (IVD_RES_CHANGED == (s_dec_op.u4_error_code & 0xFF));

            GETTIME(&mTimeEnd, NULL);
            /* Compute time taken for decode() */
            TIME_DIFF(mTimeStart, mTimeEnd, timeTaken);

            ALOGV("timeTaken=%6d delay=%6d numBytes=%6d", timeTaken, timeDelay,
                   s_dec_op.u4_num_bytes_consumed);
            if (s_dec_op.u4_frame_decoded_flag && !mFlushNeeded) {
                mFlushNeeded = true;
            }

            if ((inHeader != NULL) && (1 != s_dec_op.u4_frame_decoded_flag)) {
                /* If the input did not contain picture data, then ignore
                 * the associated timestamp */
                mTimeStampsValid[timeStampIx] = false;
            }

            // This is needed to handle CTS DecoderTest testCodecResetsHEVCWithoutSurface,
            // which is not sending SPS/PPS after port reconfiguration and flush to the codec.
            if (unsupportedDimensions && !mFlushNeeded) {
                bool portWillReset = false;
                handlePortSettingsChange(&portWillReset, s_dec_op.u4_pic_wd, s_dec_op.u4_pic_ht);

                CHECK_EQ(reInitDecoder(), (status_t)OK);

                setDecodeArgs(&s_dec_ip, &s_dec_op, inHeader, outHeader, timeStampIx);

                ivdec_api_function(mCodecCtx, (void *)&s_dec_ip, (void *)&s_dec_op);
                return;
            }

            // If the decoder is in the changing resolution mode and there is no output present,
            // that means the switching is done and it's ready to reset the decoder and the plugin.
            if (mChangingResolution && !s_dec_op.u4_output_present) {
                mChangingResolution = false;
                resetDecoder();
                resetPlugin();
                continue;
            }

            if (unsupportedDimensions || resChanged) {
                mChangingResolution = true;
                if (mFlushNeeded) {
                    setFlushMode();
                }

                if (unsupportedDimensions) {
                    mNewWidth = s_dec_op.u4_pic_wd;
                    mNewHeight = s_dec_op.u4_pic_ht;
                    mInitNeeded = true;
                }
                continue;
            }

            if ((0 < s_dec_op.u4_pic_wd) && (0 < s_dec_op.u4_pic_ht)) {
                uint32_t width = s_dec_op.u4_pic_wd;
                uint32_t height = s_dec_op.u4_pic_ht;
                bool portWillReset = false;
                handlePortSettingsChange(&portWillReset, width, height);

                if (portWillReset) {
                    resetDecoder();
                    return;
                }
            }

            if (s_dec_op.u4_output_present) {
                outHeader->nFilledLen = (mWidth * mHeight * 3) / 2;

                outHeader->nTimeStamp = mTimeStamps[s_dec_op.u4_ts];
                mTimeStampsValid[s_dec_op.u4_ts] = false;

                outInfo->mOwnedByUs = false;
                outQueue.erase(outQueue.begin());
                outInfo = NULL;
                notifyFillBufferDone(outHeader);
                outHeader = NULL;
            } else {
                /* If in flush mode and no output is returned by the codec,
                 * then come out of flush mode */
                mIsInFlush = false;

                /* If EOS was recieved on input port and there is no output
                 * from the codec, then signal EOS on output port */
                if (mReceivedEOS) {
                    outHeader->nFilledLen = 0;
                    outHeader->nFlags |= OMX_BUFFERFLAG_EOS;

                    outInfo->mOwnedByUs = false;
                    outQueue.erase(outQueue.begin());
                    outInfo = NULL;
                    notifyFillBufferDone(outHeader);
                    outHeader = NULL;
                    resetPlugin();
                }
            }
        }

        // TODO: Handle more than one picture data
        if (inHeader != NULL) {
            inInfo->mOwnedByUs = false;
            inQueue.erase(inQueue.begin());
            inInfo = NULL;
            notifyEmptyBufferDone(inHeader);
            inHeader = NULL;
        }
    }
}