void
set_tty_raw(int enabled)
{
dump_ttymodes("set_tty_raw", enabled);
if (enabled) {
#ifdef UNIX
# if USE_POSIX_TERMIOS || USE_TERMIO
new_modes.c_iflag = 0;
new_modes.c_lflag = 0;
new_modes.c_cc[VMIN] = 1;
new_modes.c_cc[VTIME] = 0;
set_ttymodes(&new_modes);
set_tty_crmod(FALSE);
# else /* USE_SGTTY */
# ifdef HAVE_FCNTL_H
new_modes.sg_flags &= ~CBREAK;
# endif
new_modes.sg_flags |= RAW;
set_ttymodes(&new_modes);
{
struct tchars tmp_tchars;
struct ltchars tmp_ltchars;
memset(&tmp_tchars, -1, sizeof(tmp_tchars));
memset(&tmp_ltchars, -1, sizeof(tmp_ltchars));
ioctl(0, TIOCSETC, &tmp_tchars);
ioctl(0, TIOCSLTC, &tmp_ltchars);
}
# endif
#endif
} else {
#ifdef UNIX
# if USE_POSIX_TERMIOS || USE_TERMIO
new_modes = old_modes; /* FIXME */
# else /* USE_SGTTY */
new_modes.sg_flags &= ~RAW;
# ifdef HAVE_FCNTL_H
new_modes.sg_flags |= CBREAK;
# endif
ioctl(0, TIOCSETC, &old_tchars);
ioctl(0, TIOCSLTC, &old_ltchars);
# endif
set_ttymodes(&new_modes);
#endif
}
dump_ttymodes("...set_tty_raw", enabled);
}
int
tst_screen(MENU_ARGS)
{
/* Test of:
- DECSTBM (Set Top and Bottom Margins)
- TBC (Tabulation Clear)
- HTS (Horizontal Tabulation Set)
- SM RM (Set/Reset mode): - 80/132 chars
. - Origin: Relative/absolute
. - Scroll: Smooth/jump
. - Wraparound
- SGR (Select Graphic Rendition)
- SM RM (Set/Reset Mode) - Inverse
- DECSC (Save Cursor)
- DECRC (Restore Cursor)
*/
int i, j, cset, row, col, background;
static const char *tststr = "*qx`";
static const char *attr[5] =
{
";0", ";1", ";4", ";5", ";7"
};
set_tty_crmod(TRUE); /* want to disable tab/space conversion */
cup(1, 1);
decawm(TRUE); /* DECAWM: Wrap Around ON */
for (col = 1; col <= min_cols * 2; col++)
printf("*");
decawm(FALSE); /* DECAWM: Wrap Around OFF */
cup(3, 1);
for (col = 1; col <= min_cols * 2; col++)
printf("*");
decawm(TRUE); /* DECAWM: Wrap Around ON */
cup(5, 1);
println("This should be three identical lines of *'s completely filling");
println("the top of the screen without any empty lines between.");
println("(Test of WRAP AROUND mode setting.)");
holdit();
ed(2);
tbc(3);
cup(1, 1);
for (col = 1; col <= min_cols - 2; col += 3) {
cuf(3);
hts();
}
cup(1, 4);
for (col = 4; col <= min_cols - 2; col += 6) {
tbc(0);
cuf(6);
}
cup(1, 7);
tbc(1);
tbc(2); /* no-op */
cup(1, 1);
for (col = 1; col <= min_cols - 2; col += 6)
printf("%c*", TAB);
cup(2, 2);
for (col = 2; col <= min_cols - 2; col += 6)
printf(" *");
cup(4, 1);
println("Test of TAB setting/resetting. These two lines");
printf("should look the same. ");
holdit();
for (background = 0; background <= 1; background++) {
if (background)
decscnm(FALSE);
else
decscnm(TRUE);
deccolm(TRUE); /* 132 cols */
ed(2); /* VT100 clears screen on SM3/RM3, but not obviously, so... */
cup(1, 1);
tbc(3);
for (col = 1; col <= max_cols; col += TABWIDTH) {
cuf(TABWIDTH);
hts();
}
cup(1, 1);
for (col = 1; col <= max_cols; col += 10)
printf("%.*s", (max_cols > col) ? (max_cols - col) : 10, "1234567890");
for (row = 3; row <= 20; row++) {
cup(row, row);
printf("This is %d column mode, %s background.", max_cols,
background ? "dark" : "light");
}
holdit();
deccolm(FALSE); /* 80 cols */
ed(2); /* VT100 clears screen on SM3/RM3, but not obviously, so... */
cup(1, 1);
for (col = 1; col <= min_cols; col += 10)
printf("%.*s", (min_cols > col) ? (min_cols - col) : 10, "1234567890");
for (row = 3; row <= 20; row++) {
cup(row, row);
printf("This is %d column mode, %s background.", min_cols,
background ? "dark" : "light");
}
holdit();
}
do_scrolling();
ed(2);
decstbm(max_lines - 1, max_lines);
printf(
"\nOrigin mode test. This line should be at the bottom of the screen.");
cup(1, 1);
printf("%s",
"This line should be the one above the bottom of the screen. ");
holdit();
ed(2);
decom(FALSE); /* Origin mode (absolute) */
cup(max_lines, 1);
printf(
"Origin mode test. This line should be at the bottom of the screen.");
cup(1, 1);
printf("%s", "This line should be at the top of the screen. ");
holdit();
decstbm(1, max_lines);
ed(2);
/* *INDENT-OFF* */
cup( 1,20); printf("Graphic rendition test pattern:");
cup( 4, 1); sgr("0"); printf("vanilla");
cup( 4,40); sgr("0;1"); printf("bold");
cup( 6, 6); sgr(";4"); printf("underline");
cup( 6,45);sgr(";1");sgr("4");printf("bold underline");
cup( 8, 1); sgr("0;5"); printf("blink");
cup( 8,40); sgr("0;5;1"); printf("bold blink");
cup(10, 6); sgr("0;4;5"); printf("underline blink");
cup(10,45); sgr("0;1;4;5"); printf("bold underline blink");
cup(12, 1); sgr("1;4;5;0;7"); printf("negative");
cup(12,40); sgr("0;1;7"); printf("bold negative");
cup(14, 6); sgr("0;4;7"); printf("underline negative");
cup(14,45); sgr("0;1;4;7"); printf("bold underline negative");
cup(16, 1); sgr("1;4;;5;7"); printf("blink negative");
cup(16,40); sgr("0;1;5;7"); printf("bold blink negative");
cup(18, 6); sgr("0;4;5;7"); printf("underline blink negative");
cup(18,45); sgr("0;1;4;5;7"); printf("bold underline blink negative");
/* *INDENT-ON* */
sgr("");
decscnm(FALSE); /* Inverse video off */
cup(max_lines - 1, 1);
el(0);
printf("Dark background. ");
holdit();
decscnm(TRUE); /* Inverse video */
cup(max_lines - 1, 1);
el(0);
printf("Light background. ");
holdit();
decscnm(FALSE);
ed(2);
/* *INDENT-OFF* */
cup(8,12); printf("normal");
cup(8,24); printf("bold");
cup(8,36); printf("underscored");
cup(8,48); printf("blinking");
cup(8,60); printf("reversed");
cup(10,1); printf("stars:");
cup(12,1); printf("line:");
cup(14,1); printf("x'es:");
cup(16,1); printf("diamonds:");
/* *INDENT-ON* */
for (cset = 0; cset <= 3; cset++) {
for (i = 0; i <= 4; i++) {
cup(10 + 2 * cset, 12 + 12 * i);
sgr(attr[i]);
if (cset == 0 || cset == 2)
scs_normal();
else
scs_graphics();
for (j = 0; j <= 4; j++) {
printf("%c", tststr[cset]);
}
decsc();
cup(cset + 1, i + 1);
sgr("");
scs_normal();
printf("A");
decrc();
for (j = 0; j <= 4; j++) {
printf("%c", tststr[cset]);
}
}
}
sgr("0");
scs_normal();
cup(21, 1);
println("Test of the SAVE/RESTORE CURSOR feature. There should");
println("be ten characters of each flavour, and a rectangle");
println("of 5 x 4 A's filling the top left of the screen.");
restore_ttymodes();
return MENU_HOLD;
}
int
tst_movements(MENU_ARGS)
{
/* Test of:
CUF (Cursor Forward)
CUB (Cursor Backward)
CUD (Cursor Down) IND (Index) NEL (Next Line)
CUU (Cursor Up) RI (Reverse Index)
CUP (Cursor Position) HVP (Horizontal and Vertical Position)
ED (Erase in Display)
EL (Erase in Line)
DECALN (Screen Alignment Display)
DECAWM (Autowrap)
<CR> <BS>
Cursor control characters inside CSI sequences
*/
int i, row, col, pass, width, hlfxtra;
const char *ctext = "This is a correct sentence";
set_tty_crmod(TRUE); /* want to disable tab/space conversion */
for (pass = 0; pass <= 1; pass++) {
int inner_l, inner_r;
if (pass == 0) {
deccolm(FALSE);
width = min_cols;
} else {
deccolm(TRUE);
width = max_cols;
}
/* Compute left/right columns for a 60-column box centered in 'width' */
inner_l = (width - 60) / 2;
inner_r = 61 + inner_l;
hlfxtra = (width - 80) / 2;
if (LOG_ENABLED)
fprintf(log_fp, "tst_movements box(%d cols)\n", pass ? max_cols : min_cols);
decaln();
cup(9, inner_l);
ed(1);
cup(18, 60 + hlfxtra);
ed(0);
el(1);
cup(9, inner_r);
el(0);
/* 132: 36..97 */
/* 80: 10..71 */
for (row = 10; row <= 16; row++) {
cup(row, inner_l);
el(1);
cup(row, inner_r);
el(0);
}
cup(17, 30);
el(2);
for (col = 1; col <= width; col++) {
hvp(max_lines, col);
printf("*");
hvp(1, col);
printf("*");
}
cup(2, 2);
for (row = 2; row <= max_lines - 1; row++) {
printf("+");
cub(1);
ind();
}
cup(max_lines - 1, width - 1);
for (row = max_lines - 1; row >= 2; row--) {
printf("+");
cub(1);
ri();
}
cup(2, 1);
for (row = 2; row <= max_lines - 1; row++) {
printf("*");
cup(row, width);
printf("*");
cub(10);
if (row < 10)
nel();
else
printf("\n");
}
cup(2, 10);
cub(42 + hlfxtra);
cuf(2);
for (col = 3; col <= width - 2; col++) {
printf("+");
cuf(0);
cub(2);
cuf(1);
}
cup(max_lines - 1, inner_r - 1);
cuf(42 + hlfxtra);
cub(2);
for (col = width - 2; col >= 3; col--) {
printf("+");
cub(1);
cuf(1);
cub(0);
printf("%c", 8);
}
cup(1, 1);
cuu(10);
cuu(1);
cuu(0);
cup(max_lines, width);
cud(10);
cud(1);
cud(0);
cup(10, 2 + inner_l);
for (row = 10; row <= 15; row++) {
for (col = 2 + inner_l; col <= inner_r - 2; col++)
printf(" ");
cud(1);
cub(58);
}
cuu(5);
cuf(1);
printf("The screen should be cleared, and have an unbroken bor-");
cup(12, inner_l + 3);
printf("der of *'s and +'s around the edge, and exactly in the");
cup(13, inner_l + 3);
printf("middle there should be a frame of E's around this text");
cup(14, inner_l + 3);
printf("with one (1) free position around it. ");
holdit();
}
deccolm(FALSE);
/* DECAWM demo */
for (pass = 0; pass <= 1; pass++) {
static char on_left[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
static char on_right[] = "abcdefghijklmnopqrstuvwxyz";
int height = sizeof(on_left) - 1;
int region = max_lines - 6;
if (LOG_ENABLED)
fprintf(log_fp, "tst_movements wrap(%d cols)\n", pass ? max_cols : min_cols);
/* note: DECCOLM clears the screen */
if (pass == 0) {
deccolm(FALSE);
width = min_cols;
} else {
deccolm(TRUE);
width = max_cols;
}
println("Test of autowrap, mixing control and print characters.");
println("The left/right margins should have letters in order:");
decstbm(3, region + 3);
decom(TRUE); /* this also homes the cursor */
for (i = 0; i < height; ++i) {
switch (i % 4) {
case 0:
/* draw characters as-is, for reference */
__(cup(region + 1, 1), printf("%c", on_left[i]));
__(cup(region + 1, width), printf("%c", on_right[i]));
printf("\n");
break;
case 1:
/* simple wrapping */
__(cup(region, width), printf("%c%c", on_right[i - 1], on_left[i]));
/* backspace at right margin */
__(cup(region + 1, width), printf("%c%c %c",
on_left[i], BS, on_right[i]));
printf("\n");
break;
case 2:
/* tab to right margin */
__(cup(region + 1, width), printf("%c%c%c%c%c%c",
on_left[i], BS, BS,
TAB, TAB, on_right[i]));
__(cup(region + 1, 2), printf("%c%c\n", BS, on_left[i]));
break;
default:
/* newline at right margin */
__(cup(region + 1, width), printf("\n"));
__(cup(region, 1), printf("%c", on_left[i]));
__(cup(region, width), printf("%c", on_right[i]));
break;
}
}
decom(FALSE);
decstbm(0, 0);
cup(max_lines - 2, 1);
holdit();
}
deccolm(FALSE); /* 80 cols */
if (LOG_ENABLED)
fprintf(log_fp, "tst_movements cursor-controls in ESC sequences\n");
vt_clear(2);
vt_move(1, 1);
println("Test of cursor-control characters inside ESC sequences.");
println("Below should be four identical lines:");
println("");
println("A B C D E F G H I");
for (i = 1; i < 10; i++) {
printf("%c", '@' + i);
do_csi("2%cC", BS); /* Two forward, one backspace */
}
println("");
/* Now put CR in CUF sequence. */
printf("A ");
for (i = 2; i < 10; i++)
printf("%s%c%dC%c", csi_output(), CR, 2 * i - 2, '@' + i);
println("");
/* Now put VT in CUU sequence. */
rm("20");
for (i = 1; i < 10; i++) {
printf("%c ", '@' + i);
do_csi("1\013A");
}
println("");
println("");
holdit();
if (LOG_ENABLED)
fprintf(log_fp, "tst_movements leading zeros in ESC sequences\n");
vt_clear(2);
vt_move(1, 1);
println("Test of leading zeros in ESC sequences.");
printf("Two lines below you should see the sentence \"%s\".", ctext);
for (col = 1; *ctext; col++)
printf("%s00000000004;00000000%dH%c", csi_output(), col, *ctext++);
cup(20, 1);
restore_ttymodes();
return MENU_HOLD;
}
