/*
* Alert box for a failed attempt to close a capture file.
* "err" is assumed to be a UNIX-style errno or a WTAP_ERR_ value.
*
* When closing a capture file:
*
* some information in the file that can't be determined until
* all packets have been written might be written to the file
* (such as a table of the file offsets of all packets);
*
* data buffered in the low-level file writing code might be
* flushed to the file;
*
* for remote file systems, data written to the file but not
* yet sent to the server might be sent to the server or, if
* that data was sent asynchronously, "out of space", "disk
* quota exceeded", or "I/O error" indications might have
* been received but not yet delivered, and the close operation
* could deliver them;
*
* so we have to check for write errors here.
*
* XXX - add explanatory secondary text for at least some of the errors;
* various HIGs suggest that you should, for example, suggest that the
* user remove files if the file system is full. Perhaps that's because
* they're providing guidelines for people less sophisticated than the
* typical Wireshark user is, but....
*/
void
cfile_close_failure_alert_box(const char *filename, int err)
{
gchar *display_basename;
if (err < 0) {
/* Wiretap error. */
display_basename = g_filename_display_basename(filename);
switch (err) {
case WTAP_ERR_CANT_CLOSE:
simple_error_message_box(
"The file \"%s\" couldn't be closed for some unknown reason.",
display_basename);
break;
case WTAP_ERR_SHORT_WRITE:
simple_error_message_box(
"A full write couldn't be done to the file \"%s\".",
display_basename);
break;
default:
simple_error_message_box(
"An error occurred while closing the file \"%s\": %s.",
display_basename, wtap_strerror(err));
break;
}
g_free(display_basename);
} else {
/* OS error.
We assume that a close error from the OS is really a write error. */
write_failure_alert_box(filename, err);
}
}
// Look for channel to plot based upon currently selected frame.
void LteRlcGraphDialog::findChannel()
{
// Temporarily disconnect mouse move signals.
QCustomPlot *rp = ui->rlcPlot;
disconnect(rp, SIGNAL(mouseMove(QMouseEvent*)), this, SLOT(mouseMoved(QMouseEvent*)));
char *err_string = NULL;
// Rescan for channel data.
rlc_graph_segment_list_free(&graph_);
if (!rlc_graph_segment_list_get(cap_file_.capFile(), &graph_, graph_.channelSet,
&err_string)) {
// Pop up an error box to report error.
simple_error_message_box("%s", err_string);
g_free(err_string);
return;
}
// Reconnect mouse move signal.
connect(rp, SIGNAL(mouseMove(QMouseEvent*)), this, SLOT(mouseMoved(QMouseEvent*)));
}
/*
* Alert box for a failed attempt to open a capture file for reading.
* "filename" is the name of the file being opened; "err" is assumed
* to be a UNIX-style errno or a WTAP_ERR_ value; "err_info" is assumed
* to be a string giving further information for some WTAP_ERR_ values..
*
* XXX - add explanatory secondary text for at least some of the errors;
* various HIGs suggest that you should, for example, suggest that the
* user remove files if the file system is full. Perhaps that's because
* they're providing guidelines for people less sophisticated than the
* typical Wireshark user is, but....
*/
void
cfile_open_failure_alert_box(const char *filename, int err, gchar *err_info)
{
gchar *display_basename;
if (err < 0) {
/* Wiretap error. */
display_basename = g_filename_display_basename(filename);
switch (err) {
case WTAP_ERR_NOT_REGULAR_FILE:
simple_error_message_box(
"The file \"%s\" is a \"special file\" or socket or other non-regular file.",
display_basename);
break;
case WTAP_ERR_RANDOM_OPEN_PIPE:
simple_error_message_box(
"The file \"%s\" is a pipe or FIFO; Wireshark can't read pipe or FIFO files.\n"
"To capture from a pipe or FIFO use wireshark -i -",
display_basename);
break;
case WTAP_ERR_FILE_UNKNOWN_FORMAT:
simple_error_message_box(
"The file \"%s\" isn't a capture file in a format Wireshark understands.",
display_basename);
break;
case WTAP_ERR_UNSUPPORTED:
simple_error_message_box(
"The file \"%s\" contains record data that Wireshark doesn't support.\n"
"(%s)",
display_basename,
err_info != NULL ? err_info : "no information supplied");
g_free(err_info);
break;
case WTAP_ERR_ENCAP_PER_PACKET_UNSUPPORTED:
simple_error_message_box(
"The file \"%s\" is a capture for a network type that Wireshark doesn't support.",
display_basename);
break;
case WTAP_ERR_BAD_FILE:
simple_error_message_box(
"The file \"%s\" appears to be damaged or corrupt.\n"
"(%s)",
display_basename,
err_info != NULL ? err_info : "no information supplied");
g_free(err_info);
break;
case WTAP_ERR_CANT_OPEN:
simple_error_message_box(
"The file \"%s\" could not be opened for some unknown reason.",
display_basename);
break;
case WTAP_ERR_SHORT_READ:
simple_error_message_box(
"The file \"%s\" appears to have been cut short"
" in the middle of a packet or other data.",
display_basename);
break;
case WTAP_ERR_DECOMPRESS:
simple_error_message_box(
"The file \"%s\" cannot be decompressed; it may be damaged or corrupt.\n"
"(%s)", display_basename,
err_info != NULL ? err_info : "no information supplied");
g_free(err_info);
break;
case WTAP_ERR_DECOMPRESSION_NOT_SUPPORTED:
simple_error_message_box(
"The file \"%s\" cannot be decompressed; it is compressed in a way that we don't support.\n"
"(%s)", display_basename,
err_info != NULL ? err_info : "no information supplied");
g_free(err_info);
break;
default:
simple_error_message_box(
"The file \"%s\" could not be opened: %s.",
display_basename,
wtap_strerror(err));
break;
}
g_free(display_basename);
} else {
/* OS error. */
open_failure_alert_box(filename, err, FALSE);
}
}
/*
* Alert box for a failed attempt to write to a capture file.
* "in_filename" is the name of the file from which the record being
* written came; "out_filename" is the name of the file to which we're
* writing; "err" is assumed "err" is assumed to be a UNIX-style errno
* or a WTAP_ERR_ value; "err_info" is assumed to be a string giving
* further information for some WTAP_ERR_ values; "framenum" is the frame
* number of the record on which the error occurred; "file_type_subtype"
* is a WTAP_FILE_TYPE_SUBTYPE_ value for the type and subtype of file
* being written.
*/
void
cfile_write_failure_alert_box(const char *in_filename, const char *out_filename,
int err, gchar *err_info, guint32 framenum,
int file_type_subtype)
{
char *in_file_string;
char *out_display_basename;
if (err < 0) {
/* Wiretap error. */
if (in_filename == NULL)
in_file_string = g_strdup("");
else
in_file_string = g_strdup_printf(" of file \"%s\"", in_filename);
switch (err) {
case WTAP_ERR_UNWRITABLE_ENCAP:
/*
* This is a problem with the particular frame we're writing and
* the file type and subtype we're writing; note that, and report
* the frame number and file type/subtype.
*/
simple_error_message_box(
"Frame %u%s has a network type that can't be saved in a \"%s\" file.",
framenum, in_file_string,
wtap_file_type_subtype_string(file_type_subtype));
break;
case WTAP_ERR_ENCAP_PER_PACKET_UNSUPPORTED:
/*
* This is a problem with the particular frame we're writing and
* the file type and subtype we're writing; note that, and report
* the frame number and file type/subtype.
*/
simple_error_message_box(
"Frame %u%s has a network type that differs from the network type of earlier packets, which isn't supported in a \"%s\" file.",
framenum, in_file_string,
wtap_file_type_subtype_string(file_type_subtype));
break;
case WTAP_ERR_PACKET_TOO_LARGE:
/*
* This is a problem with the particular frame we're writing and
* the file type and subtype we're writing; note that, and report
* the frame number and file type/subtype.
*/
simple_error_message_box(
"Frame %u%s is larger than Wireshark supports in a \"%s\" file.",
framenum, in_file_string,
wtap_file_type_subtype_string(file_type_subtype));
break;
case WTAP_ERR_UNWRITABLE_REC_TYPE:
/*
* This is a problem with the particular record we're writing and
* the file type and subtype we're writing; note that, and report
* the record number and file type/subtype.
*/
simple_error_message_box(
"Record %u%s has a record type that can't be saved in a \"%s\" file.",
framenum, in_file_string,
wtap_file_type_subtype_string(file_type_subtype));
break;
case WTAP_ERR_UNWRITABLE_REC_DATA:
/*
* This is a problem with the particular record we're writing and
* the file type and subtype we're writing; note that, and report
* the record number and file type/subtype.
*/
simple_error_message_box(
"Record %u%s has data that can't be saved in a \"%s\" file.\n"
"(%s)",
framenum, in_file_string,
wtap_file_type_subtype_string(file_type_subtype),
err_info != NULL ? err_info : "no information supplied");
g_free(err_info);
break;
case WTAP_ERR_SHORT_WRITE:
out_display_basename = g_filename_display_basename(out_filename);
simple_error_message_box(
"A full write couldn't be done to the file \"%s\".",
out_display_basename);
g_free(out_display_basename);
break;
default:
out_display_basename = g_filename_display_basename(out_filename);
simple_error_message_box(
"An error occurred while writing to the file \"%s\": %s.",
out_display_basename, wtap_strerror(err));
g_free(out_display_basename);
break;
}
g_free(in_file_string);
} else {
/* OS error. */
write_failure_alert_box(out_filename, err);
}
}
/*
* Alert box for a failed attempt to read from a capture file.
* "err" is assumed to be a UNIX-style errno or a WTAP_ERR_ value;
* "err_info" is assumed to be a string giving further information for
* some WTAP_ERR_ values.
*/
void
cfile_read_failure_alert_box(const char *filename, int err, gchar *err_info)
{
gchar *display_name;
if (filename == NULL)
display_name = g_strdup("capture file");
else {
gchar *display_basename;
display_basename = g_filename_display_basename(filename);
display_name = g_strdup_printf("capture file \"%s\"", display_basename);
g_free(display_basename);
}
switch (err) {
case WTAP_ERR_UNSUPPORTED:
simple_error_message_box(
"The %s contains record data that Wireshark doesn't support.\n"
"(%s)",
display_name,
err_info != NULL ? err_info : "no information supplied");
g_free(err_info);
break;
case WTAP_ERR_SHORT_READ:
simple_error_message_box(
"The %s appears to have been cut short in the middle of a packet.",
display_name);
break;
case WTAP_ERR_BAD_FILE:
simple_error_message_box(
"The %s appears to be damaged or corrupt.\n"
"(%s)",
display_name,
err_info != NULL ? err_info : "no information supplied");
g_free(err_info);
break;
case WTAP_ERR_DECOMPRESS:
simple_error_message_box(
"The %s cannot be decompressed; it may be damaged or corrupt.\n"
"(%s)",
display_name,
err_info != NULL ? err_info : "no information supplied");
g_free(err_info);
break;
case WTAP_ERR_DECOMPRESSION_NOT_SUPPORTED:
simple_error_message_box(
"The %s cannot be decompressed; it is compressed in a way that we don't support.\n"
"(%s)",
display_name,
err_info != NULL ? err_info : "no information supplied");
g_free(err_info);
break;
default:
simple_error_message_box(
"An error occurred while reading the %s: %s.",
display_name,
wtap_strerror(err));
break;
}
g_free(display_name);
}
/*
* Alert box for a failed attempt to open a capture file for writing.
* "filename" is the name of the file being opened; "err" is assumed
* to be a UNIX-style errno or a WTAP_ERR_ value; "file_type_subtype"
* is a WTAP_FILE_TYPE_SUBTYPE_ value for the type and subtype of file
* being opened.
*
* XXX - add explanatory secondary text for at least some of the errors;
* various HIGs suggest that you should, for example, suggest that the
* user remove files if the file system is full. Perhaps that's because
* they're providing guidelines for people less sophisticated than the
* typical Wireshark user is, but....
*/
void
cfile_dump_open_failure_alert_box(const char *filename, int err,
int file_type_subtype)
{
gchar *display_basename;
if (err < 0) {
/* Wiretap error. */
display_basename = g_filename_display_basename(filename);
switch (err) {
case WTAP_ERR_NOT_REGULAR_FILE:
simple_error_message_box(
"The file \"%s\" is a \"special file\" or socket or other non-regular file.",
display_basename);
break;
case WTAP_ERR_CANT_WRITE_TO_PIPE:
simple_error_message_box(
"The file \"%s\" is a pipe, and %s capture files can't be "
"written to a pipe.",
display_basename, wtap_file_type_subtype_string(file_type_subtype));
break;
case WTAP_ERR_UNWRITABLE_FILE_TYPE:
simple_error_message_box(
"Wireshark doesn't support writing capture files in that format.");
break;
case WTAP_ERR_UNWRITABLE_ENCAP:
simple_error_message_box("Wireshark can't save this capture in that format.");
break;
case WTAP_ERR_ENCAP_PER_PACKET_UNSUPPORTED:
simple_error_message_box(
"Wireshark can't save this capture in that format.");
break;
case WTAP_ERR_CANT_OPEN:
simple_error_message_box(
"The file \"%s\" could not be created for some unknown reason.",
display_basename);
break;
case WTAP_ERR_SHORT_WRITE:
simple_error_message_box(
"A full header couldn't be written to the file \"%s\".",
display_basename);
break;
case WTAP_ERR_COMPRESSION_NOT_SUPPORTED:
simple_error_message_box(
"This file type cannot be written as a compressed file.");
break;
default:
simple_error_message_box(
"The file \"%s\" could not be created: %s.",
display_basename,
wtap_strerror(err));
break;
}
g_free(display_basename);
} else {
/* OS error. */
open_failure_alert_box(filename, err, TRUE);
}
}
