C++ (Cpp) simpliciti_get_ed_data_callback примеры использования

Пример #1

Файл: main_ED_BM.c Проект: CaptFrank/Black-Box-Mouse-Interface

// *************************************************************************************************
// @fn          simpliciti_main_tx_only
// @brief       Get data through callback. Transfer data when external trigger is set.
// @param       none
// @return      none
// *************************************************************************************************
void simpliciti_main_tx_only(void)
{
    while (1)
    {
        // Get end device data from callback function
        simpliciti_get_ed_data_callback();

        // Send data when flag bit SIMPLICITI_TRIGGER_SEND_DATA is set
        if (getFlag(simpliciti_flag, SIMPLICITI_TRIGGER_SEND_DATA))
        {
            // Get radio ready. Wakes up in IDLE state.
            SMPL_Ioctl(IOCTL_OBJ_RADIO, IOCTL_ACT_RADIO_AWAKE, 0);

            // Acceleration / button events packets are 4 bytes long
            SMPL_SendOpt(sLinkID1, simpliciti_data, 4, SMPL_TXOPTION_NONE);

            // Put radio back to SLEEP state
            SMPL_Ioctl(IOCTL_OBJ_RADIO, IOCTL_ACT_RADIO_SLEEP, 0);

            clearFlag(simpliciti_flag, SIMPLICITI_TRIGGER_SEND_DATA);
        }

        // Exit when flag bit SIMPLICITI_TRIGGER_STOP is set
        if (getFlag(simpliciti_flag, SIMPLICITI_TRIGGER_STOP))
        {
            // Clean up SimpliciTI stack to enable restarting
            sInit_done = 0;
            break;
        }
    }
}

Пример #2

Файл: main_ED_BM.c Проект: xpx/OpenChronos

// *************************************************************************************************
// @fn          simpliciti_main_tx_only
// @brief       Get data through callback. Transfer data when external trigger is set.
// @param       none
// @return      none
// *************************************************************************************************
void simpliciti_main_tx_only(void)
{
	uint8_t len, i;
	uint8_t ed_data[2];

	while(1)
	{
		// Get end device data from callback function 
		simpliciti_get_ed_data_callback();

		// Get radio ready. Wakes up in IDLE state.
		if(getFlag(simpliciti_flag, SIMPLICITI_TRIGGER_SEND_DATA) || 
		   getFlag(simpliciti_flag, SIMPLICITI_TRIGGER_RECEIVE_DATA)) {

			SMPL_Ioctl( IOCTL_OBJ_RADIO, IOCTL_ACT_RADIO_AWAKE, 0);

			// Send data when flag bit SIMPLICITI_TRIGGER_SEND_DATA is set
			if (getFlag(simpliciti_flag, SIMPLICITI_TRIGGER_SEND_DATA)) 
			{
			  // Acceleration / button events packets are 4 bytes long
              SMPL_SendOpt(sLinkID1, simpliciti_data, simpliciti_payload_length, SMPL_TXOPTION_NONE);
			  //SMPL_SendOpt(sLinkID1, simpliciti_data, simpliciti_payload_length, simpliciti_options);
              // reset options to default
              //simpliciti_options =  SMPL_TXOPTION_NONE;
			  clearFlag(simpliciti_flag, SIMPLICITI_TRIGGER_SEND_DATA);
			}
			// Receive data when flag bit SIMPLICITI_TRIGGER_RECEIVE_DATA is set
			if (getFlag(simpliciti_flag, SIMPLICITI_TRIGGER_RECEIVE_DATA)) {
				// Send 2 byte long ready-to-receive packet to stimulate host reply
				clearFlag(simpliciti_flag, SIMPLICITI_TRIGGER_RECEIVE_DATA);

				// clean up tha buffer first
				simpliciti_data[0] = 0x00;
				simpliciti_data[1] = 0x00;
				simpliciti_data[3] = 0x00;
				simpliciti_data[4] = 0x00;

				// generate a ready to receive packet
				ed_data[0] = SYNC_ED_TYPE_R2R;
				ed_data[1] = 0xCB;

				SMPL_Ioctl( IOCTL_OBJ_RADIO, IOCTL_ACT_RADIO_RXON, 0);

				// we try to receive 9 times by sending a R2R packet
				for (i = 0; i < 10; i++) {
					SMPL_SendOpt(sLinkID1, ed_data, 2, SMPL_TXOPTION_NONE);

					//WDTCTL = WDTPW + WDTHOLD;

					// Wait shortly for host reply
					NWK_DELAY(10);

					while (SMPL_Receive(sLinkID1, simpliciti_data, &len) == SMPL_SUCCESS) 
					{
						if (len > 0)
						{
							// Decode received data
							if(simpliciti_get_rvc_callback(len))
							{
								// stop retry loop
								i = 10;
								break;
							}
						}
					}
                    Timer0_A4_Delay(CONV_MS_TO_TICKS(500));
				}
			}

			// Put radio back to SLEEP state
			SMPL_Ioctl( IOCTL_OBJ_RADIO, IOCTL_ACT_RADIO_SLEEP, 0);
		}
		// Exit when flag bit SIMPLICITI_TRIGGER_STOP is set
		if (getFlag(simpliciti_flag, SIMPLICITI_TRIGGER_STOP)) 
		{
			// Clean up SimpliciTI stack to enable restarting
			sInit_done = 0;
			break;
		}
	}
}