/**@brief Function for the SoftDevice initialization.
*
* @details This function initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
// Initialize SoftDevice.
SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL);
ble_enable_params_t ble_enable_params;
err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
PERIPHERAL_LINK_COUNT,
&ble_enable_params);
APP_ERROR_CHECK(err_code);
//Check the ram settings against the used number of links
CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT,PERIPHERAL_LINK_COUNT);
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Subscribe for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
// Initialize the SoftDevice handler module.
SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL);
ble_enable_params_t ble_enable_params;
err_code = softdevice_enable_get_default_config(NRF_BLE_CENTRAL_LINK_COUNT,
NRF_BLE_PERIPHERAL_LINK_COUNT,
&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Check the ram settings against the used number of links
CHECK_RAM_START_ADDR(NRF_BLE_CENTRAL_LINK_COUNT, NRF_BLE_PERIPHERAL_LINK_COUNT);
// Enable BLE stack.
#if (NRF_SD_BLE_API_VERSION == 3)
ble_enable_params.gatt_enable_params.att_mtu = NRF_BLE_GATT_MAX_MTU_SIZE;
#endif
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
// Initialize the SoftDevice handler module.
SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL);
ble_enable_params_t ble_enable_params;
err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
PERIPHERAL_LINK_COUNT,
&ble_enable_params);
APP_ERROR_CHECK(err_code);
#ifdef BLE_DFU_APP_SUPPORT
ble_enable_params.gatts_enable_params.service_changed = 1;
#endif // BLE_DFU_APP_SUPPORT
//Check the ram settings against the used number of links
CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT,PERIPHERAL_LINK_COUNT);
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
uint32_t err_code;
// Initialize the SoftDevice handler library.
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL);
// Retrieve default BLE stack configuration parameters.
ble_enable_params_t ble_enable_params;
(void) softdevice_enable_get_default_config(NRF_BLE_CENTRAL_LINK_COUNT,
NRF_BLE_PERIPHERAL_LINK_COUNT,
&ble_enable_params);
// Manually override the default ATT MTU size.
ble_enable_params.gatt_enable_params.att_mtu = NRF_BLE_GATT_MAX_MTU_SIZE;
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Register a BLE event handler with the SoftDevice handler library.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupts.
*/
static void ble_stack_init(void)
{
ret_code_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
// Initialize the SoftDevice handler module.
SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL);
ble_enable_params_t ble_enable_params;
err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
PERIPHERAL_LINK_COUNT,
&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Stack checks first if there are still entries in the table before checking if a vendor
// specific UUID is already in the table thus to be able to call sd_ble_uuid_vs_add several
// times with the same entry, vs_uuid_count has to be 1 bigger than what is actually needed.
ble_enable_params.common_enable_params.vs_uuid_count = 2;
// Check the ram settings against the used number of links
CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT,PERIPHERAL_LINK_COUNT);
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for the SoftDevice initialization.
*
* @details This function initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
uint32_t err_code;
// Initialize SoftDevice.
// SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);
SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_RC_250_PPM_TEMP_8000MS_CALIBRATION, false);
ble_enable_params_t ble_enable_params;
err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
PERIPHERAL_LINK_COUNT,
&ble_enable_params);
APP_ERROR_CHECK(err_code);
//Check the ram settings against the used number of links
CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT, PERIPHERAL_LINK_COUNT);
extern void __data_start__;
if (IDEAL_RAM_START_ADDRESS(CENTRAL_LINK_COUNT, PERIPHERAL_LINK_COUNT) != (uint32_t)&__data_start__) {
jsiConsolePrintf("WARNING: BLE RAM start address not correct - is 0x%x, should be 0x%x", (uint32_t)&__data_start__, IDEAL_RAM_START_ADDRESS(CENTRAL_LINK_COUNT, PERIPHERAL_LINK_COUNT));
jshTransmitFlush();
}
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Subscribe for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
uint32_t err_code;
// Initialize the SoftDevice handler module.
SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);
ble_enable_params_t ble_enable_params;
err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
PERIPHERAL_LINK_COUNT,
&ble_enable_params);
APP_ERROR_CHECK(err_code);
//Check the ram settings against the used number of links
CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT,PERIPHERAL_LINK_COUNT);
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
static uint32_t ble_stack_init(bool init_softdevice)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
if (init_softdevice)
{
err_code = nrf_dfu_mbr_init_sd();
VERIFY_SUCCESS(err_code);
}
NRF_LOG_INFO("vector table: 0x%08x\r\n", BOOTLOADER_START_ADDR);
err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_START_ADDR);
VERIFY_SUCCESS(err_code);
SOFTDEVICE_HANDLER_APPSH_INIT(&clock_lf_cfg, true);
ble_enable_params_t ble_enable_params;
// Only one connection as a central is used when performing dfu.
err_code = softdevice_enable_get_default_config(1, 1, &ble_enable_params);
VERIFY_SUCCESS(err_code);
#if (NRF_SD_BLE_API_VERSION == 3)
ble_enable_params.gatt_enable_params.att_mtu = NRF_BLE_MAX_MTU_SIZE;
#endif
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
return err_code;
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*
* @param[in] init_softdevice true if SoftDevice should be initialized. The SoftDevice must only
* be initialized if a chip reset has occured. Soft reset from
* application must not reinitialize the SoftDevice.
*/
static void ble_stack_init(bool init_softdevice)
{
uint32_t err_code;
sd_mbr_command_t com = {SD_MBR_COMMAND_INIT_SD, };
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
if (init_softdevice)
{
err_code = sd_mbr_command(&com);
APP_ERROR_CHECK(err_code);
}
err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_REGION_START);
APP_ERROR_CHECK(err_code);
SOFTDEVICE_HANDLER_APPSH_INIT(&clock_lf_cfg, true);
// Enable BLE stack.
ble_enable_params_t ble_enable_params;
// Only one connection as a central is used when performing dfu.
err_code = softdevice_enable_get_default_config(1, 1, &ble_enable_params);
APP_ERROR_CHECK(err_code);
ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
error_t btle_init(void)
{
nrf_clock_lf_cfg_t clockConfiguration;
// Configure the LF clock according to values provided by btle_clock.h.
// It is input from the chain of the yotta configuration system.
clockConfiguration.source = LFCLK_CONF_SOURCE;
clockConfiguration.xtal_accuracy = LFCLK_CONF_ACCURACY;
clockConfiguration.rc_ctiv = LFCLK_CONF_RC_CTIV;
clockConfiguration.rc_temp_ctiv = LFCLK_CONF_RC_TEMP_CTIV;
SOFTDEVICE_HANDLER_INIT(&clockConfiguration, signalEvent);
// Enable BLE stack
/**
* Using this call, the application can select whether to include the
* Service Changed characteristic in the GATT Server. The default in all
* previous releases has been to include the Service Changed characteristic,
* but this affects how GATT clients behave. Specifically, it requires
* clients to subscribe to this attribute and not to cache attribute handles
* between connections unless the devices are bonded. If the application
* does not need to change the structure of the GATT server attributes at
* runtime this adds unnecessary complexity to the interaction with peer
* clients. If the SoftDevice is enabled with the Service Changed
* Characteristics turned off, then clients are allowed to cache attribute
* handles making applications simpler on both sides.
*/
static const bool IS_SRVC_CHANGED_CHARACT_PRESENT = true;
ble_enable_params_t ble_enable_params;
uint32_t err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
PERIPHERAL_LINK_COUNT,
&ble_enable_params);
ble_enable_params.gatts_enable_params.attr_tab_size = GATTS_ATTR_TAB_SIZE;
ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
ble_enable_params.common_enable_params.vs_uuid_count = UUID_TABLE_MAX_ENTRIES;
if(err_code != NRF_SUCCESS) {
return ERROR_INVALID_PARAM;
}
if (softdevice_enable(&ble_enable_params) != NRF_SUCCESS) {
return ERROR_INVALID_PARAM;
}
ble_gap_addr_t addr;
if (sd_ble_gap_address_get(&addr) != NRF_SUCCESS) {
return ERROR_INVALID_PARAM;
}
if (sd_ble_gap_address_set(BLE_GAP_ADDR_CYCLE_MODE_NONE, &addr) != NRF_SUCCESS) {
return ERROR_INVALID_PARAM;
}
ASSERT_STATUS( softdevice_ble_evt_handler_set(btle_handler));
ASSERT_STATUS( softdevice_sys_evt_handler_set(sys_evt_dispatch));
return btle_gap_init();
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*
* @param[in] init_softdevice true if SoftDeviceshould be initialized. The SoftDevice must only
* be initialized if a chip reset has occured. Soft reset from
* application must not reinitialize the SoftDevice.
*/
static void ble_stack_init(bool init_softdevice)
{
uint32_t err_code;
sd_mbr_command_t com = {SD_MBR_COMMAND_INIT_SD, };
if (init_softdevice)
{
err_code = sd_mbr_command(&com);
APP_ERROR_CHECK(err_code);
}
err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_REGION_START);
APP_ERROR_CHECK(err_code);
// TODO: enable if we're on a device with 32kHz xtal
/*nrf_clock_lf_cfg_t clock_lf_cfg = {
.source = NRF_CLOCK_LF_SRC_XTAL,
.rc_ctiv = 0,
.rc_temp_ctiv = 0,
.xtal_accuracy = NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM};*/
nrf_clock_lf_cfg_t clock_lf_cfg = {
.source = NRF_CLOCK_LF_SRC_RC,
.rc_ctiv = 16, // recommended for nRF52
.rc_temp_ctiv = 2, // recommended for nRF52
.xtal_accuracy = 0};
SOFTDEVICE_HANDLER_APPSH_INIT(&clock_lf_cfg, true);
// Enable BLE stack.
ble_enable_params_t ble_enable_params;
// Only one connection as a central is used when performing dfu.
err_code = softdevice_enable_get_default_config(1, 1, &ble_enable_params);
APP_ERROR_CHECK(err_code);
ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for event scheduler initialization.
*/
static void scheduler_init(void)
{
APP_SCHED_INIT(SCHED_MAX_EVENT_DATA_SIZE, SCHED_QUEUE_SIZE);
}
void ble_stack_start(void)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL);
// Enable BLE stack
ble_enable_params_t ble_enable_params;
err_code = softdevice_enable_get_default_config(0, 1, &ble_enable_params);
APP_ERROR_CHECK(err_code);
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*
* @param[in] init_softdevice true if SoftDevice should be initialized. The SoftDevice must only
* be initialized if a chip reset has occured. Soft reset from
* application must not reinitialize the SoftDevice.
*/
static void ble_stack_init(bool init_softdevice)
{
uint32_t err_code;
sd_mbr_command_t com = {SD_MBR_COMMAND_INIT_SD, };
// Initialize the SoftDevice handler module.
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
// Check if the 32 bit crystal does Exist or Not.
if((DFU_DEVICE_INFO->device_type & 0x8000) == 0)
{
clock_lf_cfg.source = NRF_CLOCK_LF_SRC_RC;
clock_lf_cfg.rc_ctiv = 16;
clock_lf_cfg.rc_temp_ctiv = 2;
}
if (init_softdevice)
{
err_code = sd_mbr_command(&com);
APP_ERROR_CHECK(err_code);
}
err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_REGION_START);
APP_ERROR_CHECK(err_code);
SOFTDEVICE_HANDLER_APPSH_INIT(&clock_lf_cfg, true);
// Enable BLE stack.
ble_enable_params_t ble_enable_params;
// Only one connection as a central is used when performing dfu.
err_code = softdevice_enable_get_default_config(1, 1, &ble_enable_params);
APP_ERROR_CHECK(err_code);
ble_enable_params.gatts_enable_params.service_changed = IS_SRVC_CHANGED_CHARACT_PRESENT;
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
void ble_stack_init(void)
{
uint32_t err_code;
//Copied from pca10028.h to cut dependence on bsp/
#define NRF_CLOCK_LFCLKSRC {.source = NRF_CLOCK_LF_SRC_XTAL, \
.rc_ctiv = 0, \
.rc_temp_ctiv = 0, \
.xtal_accuracy = NRF_CLOCK_LF_XTAL_ACCURACY_20_PPM}
nrf_clock_lf_cfg_t clock_lf_cfg = NRF_CLOCK_LFCLKSRC;
// Initialize the SoftDevice handler module.
SOFTDEVICE_HANDLER_INIT(&clock_lf_cfg, NULL);
ble_enable_params_t ble_enable_params;
err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
PERIPHERAL_LINK_COUNT,
&ble_enable_params);
APP_ERROR_CHECK(err_code);
ble_enable_params.common_enable_params.vs_uuid_count = VENDOR_SPECIFIC_UUID_COUNT;
//Check the ram settings against the used number of links
CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT,PERIPHERAL_LINK_COUNT);
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
APP_ERROR_CHECK(err_code);
// Register with the SoftDevice handler module for System events.
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
APP_ERROR_CHECK(err_code);
}
static uint32_t ble_stack_init(bool init_softdevice)
{
uint32_t err_code;
nrf_clock_lf_cfg_t clock_lf_cfg = {
.source = NRF_CLOCK_LF_SRC_RC,
.rc_ctiv = 16, // recommended for nRF52
.rc_temp_ctiv = 2, // recommended for nRF52
.xtal_accuracy = 0};
if (init_softdevice)
{
err_code = nrf_dfu_mbr_init_sd();
VERIFY_SUCCESS(err_code);
}
NRF_LOG_INFO("vector table: 0x%08x\r\n", BOOTLOADER_START_ADDR);
err_code = sd_softdevice_vector_table_base_set(BOOTLOADER_START_ADDR);
VERIFY_SUCCESS(err_code);
SOFTDEVICE_HANDLER_APPSH_INIT(&clock_lf_cfg, true);
ble_enable_params_t ble_enable_params;
// Only one connection as a central is used when performing dfu.
err_code = softdevice_enable_get_default_config(1, 1, &ble_enable_params);
VERIFY_SUCCESS(err_code);
#if (NRF_SD_BLE_API_VERSION == 3)
ble_enable_params.gatt_enable_params.att_mtu = NRF_BLE_MAX_MTU_SIZE;
#endif
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
return err_code;
}
/**@brief Function for adding DFU Packet characteristic to the BLE Stack.
*
* @param[in] p_dfu DFU Service structure.
*
* @return NRF_SUCCESS on success. Otherwise an error code.
*/
static uint32_t dfu_pkt_char_add(ble_dfu_t * const p_dfu)
{
ble_gatts_char_md_t char_md = {{0}};
ble_gatts_attr_t attr_char_value = {0};
ble_gatts_attr_md_t attr_md = {{0}};
ble_uuid_t char_uuid;
char_md.char_props.write_wo_resp = 1;
char_uuid.type = p_dfu->uuid_type;
char_uuid.uuid = BLE_DFU_PKT_CHAR_UUID;
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&attr_md.write_perm);
attr_md.vloc = BLE_GATTS_VLOC_STACK;
attr_md.vlen = 1;
attr_char_value.p_uuid = &char_uuid;
attr_char_value.p_attr_md = &attr_md;
attr_char_value.max_len = MAX_DFU_PKT_LEN;
attr_char_value.p_value = NULL;
return sd_ble_gatts_characteristic_add(p_dfu->service_handle,
&char_md,
&attr_char_value,
&p_dfu->dfu_pkt_handles);
}
/**@brief Function for initializing the BLE stack.
*
* @details Initializes the SoftDevice and the BLE event interrupt.
*/
static void ble_stack_init(void)
{
uint32_t err_code;
// Initialize the SoftDevice handler module.
SOFTDEVICE_HANDLER_INIT(NRF_CLOCK_LFCLKSRC_XTAL_20_PPM, NULL);
ble_enable_params_t ble_enable_params;
err_code = softdevice_enable_get_default_config(CENTRAL_LINK_COUNT,
PERIPHERAL_LINK_COUNT,
&ble_enable_params);
if (err_code == NRF_SUCCESS)
debug_printf("Softdevice configured with links and ble parameters!\r\n");
else
{
debug_printf("Ooops.. Something is wrong with setting softdevice parameters..\r\n");
APP_ERROR_CHECK(err_code);
}
#ifdef BLE_DFU_APP_SUPPORT
ble_enable_params.gatts_enable_params.service_changed = 1;
#endif // BLE_DFU_APP_SUPPORT
//Check the ram settings against the used number of links
CHECK_RAM_START_ADDR(CENTRAL_LINK_COUNT,PERIPHERAL_LINK_COUNT);
//memset(&ble_enable_params, 0, sizeof(ble_enable_params));
ble_enable_params.common_enable_params.vs_uuid_count = 2;
//ble_enable_params.gatts_enable_params.attr_tab_size = 0x0900; //changing stack size?
// Enable BLE stack.
err_code = softdevice_enable(&ble_enable_params);
if (err_code == NRF_SUCCESS)
debug_printf("Softdevice enabled successfully!\r\n");
else
{
debug_printf("Ooops.. Something is wrong with enabling softdevice..\r\n");
APP_ERROR_CHECK(err_code);
}
// Register with the SoftDevice handler module for BLE events.
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
if (err_code == NRF_SUCCESS)
debug_printf("Softdevice registered for BLE events!\r\n");
else
{
debug_printf("Ooops.. Something went wrong with registering to BLE events..\r\n");
APP_ERROR_CHECK(err_code);
}
// Register with the SoftDevice handler module for SYS events.
err_code = softdevice_sys_evt_handler_set(sys_evt_dispatch);
if (err_code == NRF_SUCCESS)
debug_printf("Softdevice registered for SYS events!\r\n");
else
{
debug_printf("Ooops.. Something went wrong with registering to SYS events..\r\n");
APP_ERROR_CHECK(err_code);
}
}
