static int config_set(uint32_t key, GVariant *data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
int ret;
(void)cg;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
devc = sdi->priv;
ret = SR_OK;
switch (key) {
case SR_CONF_LIMIT_SAMPLES:
return sr_sw_limits_config_set(&devc->limits, key, data);
case SR_CONF_ENABLED:
ret = reloadpro_set_on_off(sdi, g_variant_get_boolean(data));
break;
case SR_CONF_CURRENT_LIMIT:
ret = reloadpro_set_current_limit(sdi,
g_variant_get_double(data));
break;
default:
ret = SR_ERR_NA;
}
return ret;
}
static int config_set(uint32_t key, GVariant *data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
gboolean bval;
gdouble dval;
(void)cg;
devc = sdi->priv;
switch (key) {
case SR_CONF_LIMIT_MSEC:
case SR_CONF_LIMIT_SAMPLES:
return sr_sw_limits_config_set(&devc->limits, key, data);
case SR_CONF_VOLTAGE_TARGET:
dval = g_variant_get_double(data);
if (dval < devc->model->voltage[0] || dval > devc->voltage_max_device)
return SR_ERR_ARG;
if ((hcs_send_cmd(sdi->conn, "VOLT%03.0f\r",
(dval / devc->model->voltage[2])) < 0) ||
(hcs_read_reply(sdi->conn, 1, devc->buf, sizeof(devc->buf)) < 0))
return SR_ERR;
devc->voltage_max = dval;
break;
case SR_CONF_CURRENT_LIMIT:
dval = g_variant_get_double(data);
if (dval < devc->model->current[0] || dval > devc->current_max_device)
return SR_ERR_ARG;
if ((hcs_send_cmd(sdi->conn, "CURR%03.0f\r",
(dval / devc->model->current[2])) < 0) ||
(hcs_read_reply(sdi->conn, 1, devc->buf, sizeof(devc->buf)) < 0))
return SR_ERR;
devc->current_max = dval;
break;
case SR_CONF_ENABLED:
bval = g_variant_get_boolean(data);
if (hcs_send_cmd(sdi->conn, "SOUT%1d\r", !bval) < 0) {
sr_err("Could not send SR_CONF_ENABLED command.");
return SR_ERR;
}
if (hcs_read_reply(sdi->conn, 1, devc->buf, sizeof(devc->buf)) < 0) {
sr_err("Could not read SR_CONF_ENABLED reply.");
return SR_ERR;
}
devc->output_enabled = bval;
break;
default:
return SR_ERR_NA;
}
return SR_OK;
}
static int config_set(uint32_t key, GVariant *data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
(void)cg;
devc = sdi->priv;
return sr_sw_limits_config_set(&devc->limits, key, data);
}
static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
const struct sr_channel_group *cg)
{
struct dev_context *devc;
(void)cg;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
devc = sdi->priv;
return sr_sw_limits_config_set(&devc->limits, key, data);
}
static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
const struct sr_channel_group *cg)
{
struct dev_context *devc;
const char *tmp_str;
unsigned int i;
(void)cg;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
if (!(devc = sdi->priv)) {
sr_err("sdi->priv was NULL.");
return SR_ERR_BUG;
}
switch (key) {
case SR_CONF_LIMIT_SAMPLES:
return sr_sw_limits_config_set(&devc->limits, key, data);
case SR_CONF_DATA_SOURCE: {
tmp_str = g_variant_get_string(data, NULL);
for (i = 0; i < ARRAY_SIZE(data_sources); i++)
if (!strcmp(tmp_str, data_sources[i])) {
devc->data_source = i;
break;
}
if (i == ARRAY_SIZE(data_sources))
return SR_ERR;
break;
}
default:
return SR_ERR_NA;
}
return SR_OK;
}
static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct sr_config default_serialcomm = {
.key = SR_CONF_SERIALCOMM,
.data = g_variant_new_string("9600/8n1"),
};
struct sr_config default_modbusaddr = {
.key = SR_CONF_MODBUSADDR,
.data = g_variant_new_uint64(1),
};
GSList *opts = options, *devices;
if (!g_slist_find_custom(options, &default_serialcomm, config_compare))
opts = g_slist_prepend(opts, &default_serialcomm);
if (!g_slist_find_custom(options, &default_modbusaddr, config_compare))
opts = g_slist_prepend(opts, &default_modbusaddr);
devices = sr_modbus_scan(di->context, opts, probe_device);
while (opts != options)
opts = g_slist_delete_link(opts, opts);
g_variant_unref(default_serialcomm.data);
g_variant_unref(default_modbusaddr.data);
return devices;
}
static int dev_open(struct sr_dev_inst *sdi)
{
struct sr_modbus_dev_inst *modbus = sdi->conn;
if (sr_modbus_open(modbus) < 0)
return SR_ERR;
sdi->status = SR_ST_ACTIVE;
maynuo_m97_set_bit(modbus, PC1, 1);
return SR_OK;
}
static int dev_close(struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_modbus_dev_inst *modbus;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
modbus = sdi->conn;
if (modbus) {
devc = sdi->priv;
if (devc->expecting_registers) {
/* Wait for the last data that was requested from the device. */
uint16_t registers[devc->expecting_registers];
sr_modbus_read_holding_registers(modbus, -1,
devc->expecting_registers,
registers);
}
maynuo_m97_set_bit(modbus, PC1, 0);
if (sr_modbus_close(modbus) < 0)
return SR_ERR;
sdi->status = SR_ST_INACTIVE;
}
return SR_OK;
}
static int config_get(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
const struct sr_channel_group *cg)
{
struct dev_context *devc;
struct sr_modbus_dev_inst *modbus;
enum maynuo_m97_mode mode;
int ret, ivalue;
float fvalue;
(void)cg;
modbus = sdi->conn;
devc = sdi->priv;
ret = SR_OK;
switch (key) {
case SR_CONF_LIMIT_SAMPLES:
case SR_CONF_LIMIT_MSEC:
ret = sr_sw_limits_config_get(&devc->limits, key, data);
break;
case SR_CONF_ENABLED:
if ((ret = maynuo_m97_get_bit(modbus, ISTATE, &ivalue)) == SR_OK)
*data = g_variant_new_boolean(ivalue);
break;
case SR_CONF_REGULATION:
if ((ret = maynuo_m97_get_bit(modbus, UNREG, &ivalue)) != SR_OK)
break;
if (ivalue)
*data = g_variant_new_string("UR");
else if ((ret = maynuo_m97_get_mode(modbus, &mode)) == SR_OK)
*data = g_variant_new_string(maynuo_m97_mode_to_str(mode));
break;
case SR_CONF_VOLTAGE:
if ((ret = maynuo_m97_get_float(modbus, U, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_VOLTAGE_TARGET:
if ((ret = maynuo_m97_get_float(modbus, UFIX, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_CURRENT:
if ((ret = maynuo_m97_get_float(modbus, I, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_CURRENT_LIMIT:
if ((ret = maynuo_m97_get_float(modbus, IFIX, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED:
*data = g_variant_new_boolean(TRUE);
break;
case SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE:
if ((ret = maynuo_m97_get_bit(modbus, UOVER, &ivalue)) == SR_OK)
*data = g_variant_new_boolean(ivalue);
break;
case SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD:
if ((ret = maynuo_m97_get_float(modbus, UMAX, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
*data = g_variant_new_boolean(TRUE);
break;
case SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE:
if ((ret = maynuo_m97_get_bit(modbus, IOVER, &ivalue)) == SR_OK)
*data = g_variant_new_boolean(ivalue);
break;
case SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD:
if ((ret = maynuo_m97_get_float(modbus, IMAX, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_OVER_TEMPERATURE_PROTECTION:
*data = g_variant_new_boolean(TRUE);
break;
case SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE:
if ((ret = maynuo_m97_get_bit(modbus, HEAT, &ivalue)) == SR_OK)
*data = g_variant_new_boolean(ivalue);
break;
default:
return SR_ERR_NA;
}
return ret;
}
static int config_set(uint32_t key, GVariant *data, const struct sr_dev_inst *sdi,
const struct sr_channel_group *cg)
{
struct dev_context *devc;
struct sr_modbus_dev_inst *modbus;
int ret;
(void)cg;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
modbus = sdi->conn;
devc = sdi->priv;
ret = SR_OK;
switch (key) {
case SR_CONF_LIMIT_SAMPLES:
case SR_CONF_LIMIT_MSEC:
ret = sr_sw_limits_config_set(&devc->limits, key, data);
break;
case SR_CONF_ENABLED:
ret = maynuo_m97_set_input(modbus, g_variant_get_boolean(data));
break;
case SR_CONF_VOLTAGE_TARGET:
ret = maynuo_m97_set_float(modbus, UFIX, g_variant_get_double(data));
break;
case SR_CONF_CURRENT_LIMIT:
ret = maynuo_m97_set_float(modbus, IFIX, g_variant_get_double(data));
break;
case SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD:
ret = maynuo_m97_set_float(modbus, UMAX, g_variant_get_double(data));
break;
case SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD:
ret = maynuo_m97_set_float(modbus, IMAX, g_variant_get_double(data));
break;
default:
ret = SR_ERR_NA;
}
return ret;
}
static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst *sdi,
const struct sr_channel_group *cg)
{
struct dev_context *devc;
GVariantBuilder gvb;
int ret;
/* Always available, even without sdi. */
if (key == SR_CONF_SCAN_OPTIONS) {
*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
scanopts, ARRAY_SIZE(scanopts), sizeof(uint32_t));
return SR_OK;
} else if (key == SR_CONF_DEVICE_OPTIONS && !sdi) {
*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t));
return SR_OK;
}
if (!sdi)
return SR_ERR_ARG;
devc = sdi->priv;
ret = SR_OK;
if (!cg) {
/* No channel group: global options. */
switch (key) {
case SR_CONF_DEVICE_OPTIONS:
*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
devopts, ARRAY_SIZE(devopts), sizeof(uint32_t));
break;
default:
return SR_ERR_NA;
}
} else {
switch (key) {
case SR_CONF_DEVICE_OPTIONS:
*data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32,
devopts_cg, ARRAY_SIZE(devopts_cg), sizeof(uint32_t));
break;
case SR_CONF_VOLTAGE_TARGET:
g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
/* Min, max, write resolution. */
g_variant_builder_add_value(&gvb, g_variant_new_double(0.0));
g_variant_builder_add_value(&gvb, g_variant_new_double(devc->model->max_voltage));
g_variant_builder_add_value(&gvb, g_variant_new_double(0.001));
*data = g_variant_builder_end(&gvb);
break;
case SR_CONF_CURRENT_LIMIT:
g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
/* Min, max, step. */
g_variant_builder_add_value(&gvb, g_variant_new_double(0.0));
g_variant_builder_add_value(&gvb, g_variant_new_double(devc->model->max_current));
g_variant_builder_add_value(&gvb, g_variant_new_double(0.0001));
*data = g_variant_builder_end(&gvb);
break;
default:
return SR_ERR_NA;
}
}
return ret;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_modbus_dev_inst *modbus;
int ret;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
modbus = sdi->conn;
devc = sdi->priv;
if ((ret = sr_modbus_source_add(sdi->session, modbus, G_IO_IN, 10,
maynuo_m97_receive_data, (void *)sdi)) != SR_OK)
return ret;
sr_sw_limits_acquisition_start(&devc->limits);
std_session_send_df_header(sdi);
return maynuo_m97_capture_start(sdi);
}
static int dev_acquisition_stop(struct sr_dev_inst *sdi)
{
struct sr_modbus_dev_inst *modbus;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
std_session_send_df_end(sdi);
modbus = sdi->conn;
sr_modbus_source_remove(sdi->session, modbus);
return SR_OK;
}
static struct sr_dev_driver maynuo_m97_driver_info = {
.name = "maynuo-m97",
.longname = "maynuo M97/M98 series",
.api_version = 1,
.init = std_init,
.cleanup = std_cleanup,
.scan = scan,
.dev_list = std_dev_list,
.config_get = config_get,
.config_set = config_set,
.config_list = config_list,
.dev_open = dev_open,
.dev_close = dev_close,
.dev_acquisition_start = dev_acquisition_start,
.dev_acquisition_stop = dev_acquisition_stop,
.context = NULL,
};
SR_REGISTER_DEV_DRIVER(maynuo_m97_driver_info);
static int config_set(uint32_t key, GVariant *data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
double dval;
gboolean bval;
(void)cg;
if (sdi->status != SR_ST_ACTIVE)
return SR_ERR_DEV_CLOSED;
devc = sdi->priv;
switch (key) {
case SR_CONF_LIMIT_MSEC:
case SR_CONF_LIMIT_SAMPLES:
return sr_sw_limits_config_set(&devc->limits, key, data);
case SR_CONF_VOLTAGE_TARGET:
dval = g_variant_get_double(data);
if (dval < devc->model->voltage[0] || dval > devc->model->voltage[1])
return SR_ERR_ARG;
devc->voltage_max = dval;
devc->target = KAXXXXP_VOLTAGE_MAX;
if (korad_kaxxxxp_set_value(sdi->conn, devc) < 0)
return SR_ERR;
break;
case SR_CONF_CURRENT_LIMIT:
dval = g_variant_get_double(data);
if (dval < devc->model->current[0] || dval > devc->model->current[1])
return SR_ERR_ARG;
devc->current_max = dval;
devc->target = KAXXXXP_CURRENT_MAX;
if (korad_kaxxxxp_set_value(sdi->conn, devc) < 0)
return SR_ERR;
break;
case SR_CONF_ENABLED:
bval = g_variant_get_boolean(data);
/* Set always so it is possible turn off with sigrok-cli. */
devc->output_enabled = bval;
devc->target = KAXXXXP_OUTPUT;
if (korad_kaxxxxp_set_value(sdi->conn, devc) < 0)
return SR_ERR;
break;
case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
bval = g_variant_get_boolean(data);
devc->ocp_enabled = bval;
devc->target = KAXXXXP_OCP;
if (korad_kaxxxxp_set_value(sdi->conn, devc) < 0)
return SR_ERR;
break;
case SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED:
bval = g_variant_get_boolean(data);
devc->ovp_enabled = bval;
devc->target = KAXXXXP_OVP;
if (korad_kaxxxxp_set_value(sdi->conn, devc) < 0)
return SR_ERR;
break;
default:
return SR_ERR_NA;
}
return SR_OK;
}
static GSList *scan(struct sr_dev_driver *di, GSList *options)
{
struct sr_config default_serialcomm = {
.key = SR_CONF_SERIALCOMM,
.data = g_variant_new_string("9600/8n1"),
};
struct sr_config default_modbusaddr = {
.key = SR_CONF_MODBUSADDR,
.data = g_variant_new_uint64(1),
};
GSList *opts = options, *devices;
if (!g_slist_find_custom(options, &default_serialcomm, config_compare))
opts = g_slist_prepend(opts, &default_serialcomm);
if (!g_slist_find_custom(options, &default_modbusaddr, config_compare))
opts = g_slist_prepend(opts, &default_modbusaddr);
devices = sr_modbus_scan(di->context, opts, probe_device);
while (opts != options)
opts = g_slist_delete_link(opts, opts);
g_variant_unref(default_serialcomm.data);
g_variant_unref(default_modbusaddr.data);
return devices;
}
static int dev_open(struct sr_dev_inst *sdi)
{
struct sr_modbus_dev_inst *modbus = sdi->conn;
if (sr_modbus_open(modbus) < 0)
return SR_ERR;
maynuo_m97_set_bit(modbus, PC1, 1);
return SR_OK;
}
static int dev_close(struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_modbus_dev_inst *modbus;
modbus = sdi->conn;
if (!modbus)
return SR_ERR_BUG;
devc = sdi->priv;
if (devc->expecting_registers) {
/* Wait for the last data that was requested from the device. */
uint16_t registers[devc->expecting_registers];
sr_modbus_read_holding_registers(modbus, -1,
devc->expecting_registers, registers);
}
maynuo_m97_set_bit(modbus, PC1, 0);
return sr_modbus_close(modbus);
}
static int config_get(uint32_t key, GVariant **data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
struct sr_modbus_dev_inst *modbus;
enum maynuo_m97_mode mode;
int ret, ivalue;
float fvalue;
(void)cg;
modbus = sdi->conn;
devc = sdi->priv;
ret = SR_OK;
switch (key) {
case SR_CONF_LIMIT_SAMPLES:
case SR_CONF_LIMIT_MSEC:
ret = sr_sw_limits_config_get(&devc->limits, key, data);
break;
case SR_CONF_ENABLED:
if ((ret = maynuo_m97_get_bit(modbus, ISTATE, &ivalue)) == SR_OK)
*data = g_variant_new_boolean(ivalue);
break;
case SR_CONF_REGULATION:
if ((ret = maynuo_m97_get_bit(modbus, UNREG, &ivalue)) != SR_OK)
break;
if (ivalue)
*data = g_variant_new_string("UR");
else if ((ret = maynuo_m97_get_mode(modbus, &mode)) == SR_OK)
*data = g_variant_new_string(maynuo_m97_mode_to_str(mode));
break;
case SR_CONF_VOLTAGE:
if ((ret = maynuo_m97_get_float(modbus, U, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_VOLTAGE_TARGET:
if ((ret = maynuo_m97_get_float(modbus, UFIX, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_CURRENT:
if ((ret = maynuo_m97_get_float(modbus, I, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_CURRENT_LIMIT:
if ((ret = maynuo_m97_get_float(modbus, IFIX, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED:
*data = g_variant_new_boolean(TRUE);
break;
case SR_CONF_OVER_VOLTAGE_PROTECTION_ACTIVE:
if ((ret = maynuo_m97_get_bit(modbus, UOVER, &ivalue)) == SR_OK)
*data = g_variant_new_boolean(ivalue);
break;
case SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD:
if ((ret = maynuo_m97_get_float(modbus, UMAX, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
*data = g_variant_new_boolean(TRUE);
break;
case SR_CONF_OVER_CURRENT_PROTECTION_ACTIVE:
if ((ret = maynuo_m97_get_bit(modbus, IOVER, &ivalue)) == SR_OK)
*data = g_variant_new_boolean(ivalue);
break;
case SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD:
if ((ret = maynuo_m97_get_float(modbus, IMAX, &fvalue)) == SR_OK)
*data = g_variant_new_double(fvalue);
break;
case SR_CONF_OVER_TEMPERATURE_PROTECTION:
*data = g_variant_new_boolean(TRUE);
break;
case SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE:
if ((ret = maynuo_m97_get_bit(modbus, HEAT, &ivalue)) == SR_OK)
*data = g_variant_new_boolean(ivalue);
break;
default:
return SR_ERR_NA;
}
return ret;
}
static int config_set(uint32_t key, GVariant *data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
struct sr_modbus_dev_inst *modbus;
(void)cg;
modbus = sdi->conn;
devc = sdi->priv;
switch (key) {
case SR_CONF_LIMIT_SAMPLES:
case SR_CONF_LIMIT_MSEC:
return sr_sw_limits_config_set(&devc->limits, key, data);
case SR_CONF_ENABLED:
return maynuo_m97_set_input(modbus, g_variant_get_boolean(data));
case SR_CONF_VOLTAGE_TARGET:
return maynuo_m97_set_float(modbus, UFIX, g_variant_get_double(data));
case SR_CONF_CURRENT_LIMIT:
return maynuo_m97_set_float(modbus, IFIX, g_variant_get_double(data));
case SR_CONF_OVER_VOLTAGE_PROTECTION_THRESHOLD:
return maynuo_m97_set_float(modbus, UMAX, g_variant_get_double(data));
case SR_CONF_OVER_CURRENT_PROTECTION_THRESHOLD:
return maynuo_m97_set_float(modbus, IMAX, g_variant_get_double(data));
default:
return SR_ERR_NA;
}
return SR_OK;
}
static int config_list(uint32_t key, GVariant **data,
const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
{
struct dev_context *devc;
devc = (sdi) ? sdi->priv : NULL;
if (!cg) {
return STD_CONFIG_LIST(key, data, sdi, cg, scanopts, drvopts, devopts);
} else {
switch (key) {
case SR_CONF_DEVICE_OPTIONS:
*data = std_gvar_array_u32(ARRAY_AND_SIZE(devopts_cg));
break;
case SR_CONF_VOLTAGE_TARGET:
if (!devc || !devc->model)
return SR_ERR_ARG;
*data = std_gvar_min_max_step(0.0, devc->model->max_voltage, 0.001);
break;
case SR_CONF_CURRENT_LIMIT:
if (!devc || !devc->model)
return SR_ERR_ARG;
*data = std_gvar_min_max_step(0.0, devc->model->max_current, 0.0001);
break;
default:
return SR_ERR_NA;
}
}
return SR_OK;
}
static int dev_acquisition_start(const struct sr_dev_inst *sdi)
{
struct dev_context *devc;
struct sr_modbus_dev_inst *modbus;
int ret;
modbus = sdi->conn;
devc = sdi->priv;
if ((ret = sr_modbus_source_add(sdi->session, modbus, G_IO_IN, 10,
maynuo_m97_receive_data, (void *)sdi)) != SR_OK)
return ret;
sr_sw_limits_acquisition_start(&devc->limits);
std_session_send_df_header(sdi);
return maynuo_m97_capture_start(sdi);
}
static int dev_acquisition_stop(struct sr_dev_inst *sdi)
{
struct sr_modbus_dev_inst *modbus;
std_session_send_df_end(sdi);
modbus = sdi->conn;
sr_modbus_source_remove(sdi->session, modbus);
return SR_OK;
}
static struct sr_dev_driver maynuo_m97_driver_info = {
.name = "maynuo-m97",
.longname = "maynuo M97/M98 series",
.api_version = 1,
.init = std_init,
.cleanup = std_cleanup,
.scan = scan,
.dev_list = std_dev_list,
.dev_clear = std_dev_clear,
.config_get = config_get,
.config_set = config_set,
.config_list = config_list,
.dev_open = dev_open,
.dev_close = dev_close,
.dev_acquisition_start = dev_acquisition_start,
.dev_acquisition_stop = dev_acquisition_stop,
.context = NULL,
};
SR_REGISTER_DEV_DRIVER(maynuo_m97_driver_info);