static void puv3_soc_init(CPUUniCore32State *env)
{
qemu_irq *cpu_intc, irqs[PUV3_IRQS_NR];
DeviceState *dev;
MemoryRegion *i8042 = g_new(MemoryRegion, 1);
int i;
/* Initialize interrupt controller */
cpu_intc = qemu_allocate_irqs(puv3_intc_cpu_handler, env, 1);
dev = sysbus_create_simple("puv3_intc", PUV3_INTC_BASE, *cpu_intc);
for (i = 0; i < PUV3_IRQS_NR; i++) {
irqs[i] = qdev_get_gpio_in(dev, i);
}
/* Initialize minimal necessary devices for kernel booting */
sysbus_create_simple("puv3_pm", PUV3_PM_BASE, NULL);
sysbus_create_simple("puv3_dma", PUV3_DMA_BASE, NULL);
sysbus_create_simple("puv3_ost", PUV3_OST_BASE, irqs[PUV3_IRQS_OST0]);
sysbus_create_varargs("puv3_gpio", PUV3_GPIO_BASE,
irqs[PUV3_IRQS_GPIOLOW0], irqs[PUV3_IRQS_GPIOLOW1],
irqs[PUV3_IRQS_GPIOLOW2], irqs[PUV3_IRQS_GPIOLOW3],
irqs[PUV3_IRQS_GPIOLOW4], irqs[PUV3_IRQS_GPIOLOW5],
irqs[PUV3_IRQS_GPIOLOW6], irqs[PUV3_IRQS_GPIOLOW7],
irqs[PUV3_IRQS_GPIOHIGH], NULL);
/* Keyboard (i8042), mouse disabled for nographic */
i8042_mm_init(irqs[PUV3_IRQS_PS2_KBD], NULL, i8042, PUV3_REGS_OFFSET, 4);
memory_region_add_subregion(get_system_memory(), PUV3_PS2_BASE, i8042);
}
static void a9_daughterboard_init(const VEDBoardInfo *daughterboard,
ram_addr_t ram_size,
const char *cpu_model,
qemu_irq *pic)
{
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *lowram = g_new(MemoryRegion, 1);
ram_addr_t low_ram_size;
if (!cpu_model) {
cpu_model = "cortex-a9";
}
if (ram_size > 0x40000000) {
/* 1GB is the maximum the address space permits */
fprintf(stderr, "vexpress-a9: cannot model more than 1GB RAM\n");
exit(1);
}
memory_region_init_ram(ram, NULL, "vexpress.highmem", ram_size,
&error_abort);
vmstate_register_ram_global(ram);
low_ram_size = ram_size;
if (low_ram_size > 0x4000000) {
low_ram_size = 0x4000000;
}
/* RAM is from 0x60000000 upwards. The bottom 64MB of the
* address space should in theory be remappable to various
* things including ROM or RAM; we always map the RAM there.
*/
memory_region_init_alias(lowram, NULL, "vexpress.lowmem", ram, 0, low_ram_size);
memory_region_add_subregion(sysmem, 0x0, lowram);
memory_region_add_subregion(sysmem, 0x60000000, ram);
/* 0x1e000000 A9MPCore (SCU) private memory region */
init_cpus(cpu_model, "a9mpcore_priv", 0x1e000000, pic);
/* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
/* 0x10020000 PL111 CLCD (daughterboard) */
sysbus_create_simple("pl111", 0x10020000, pic[44]);
/* 0x10060000 AXI RAM */
/* 0x100e0000 PL341 Dynamic Memory Controller */
/* 0x100e1000 PL354 Static Memory Controller */
/* 0x100e2000 System Configuration Controller */
sysbus_create_simple("sp804", 0x100e4000, pic[48]);
/* 0x100e5000 SP805 Watchdog module */
/* 0x100e6000 BP147 TrustZone Protection Controller */
/* 0x100e9000 PL301 'Fast' AXI matrix */
/* 0x100ea000 PL301 'Slow' AXI matrix */
/* 0x100ec000 TrustZone Address Space Controller */
/* 0x10200000 CoreSight debug APB */
/* 0x1e00a000 PL310 L2 Cache Controller */
sysbus_create_varargs("l2x0", 0x1e00a000, NULL);
}
static int realview_mpcore_init(SysBusDevice *dev)
{
mpcore_rirq_state *s = FROM_SYSBUS(mpcore_rirq_state, dev);
DeviceState *gic;
DeviceState *priv;
int n;
int i;
priv = qdev_create(NULL, "arm11mpcore_priv");
qdev_prop_set_uint32(priv, "num-cpu", s->num_cpu);
qdev_init_nofail(priv);
s->priv = SYS_BUS_DEVICE(priv);
sysbus_pass_irq(dev, s->priv);
for (i = 0; i < 32; i++) {
s->cpuic[i] = qdev_get_gpio_in(priv, i);
}
/* ??? IRQ routing is hardcoded to "normal" mode. */
for (n = 0; n < 4; n++) {
gic = sysbus_create_simple("realview_gic", 0x10040000 + n * 0x10000,
s->cpuic[10 + n]);
for (i = 0; i < 64; i++) {
s->rvic[n][i] = qdev_get_gpio_in(gic, i);
}
}
qdev_init_gpio_in(&dev->qdev, mpcore_rirq_set_irq, 64);
sysbus_init_mmio(dev, sysbus_mmio_get_region(s->priv, 0));
return 0;
}
static void collie_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
StrongARMState *s;
DriveInfo *dinfo;
ram_addr_t phys_flash;
if (!cpu_model) {
cpu_model = "sa1110";
}
s = sa1110_init(collie_binfo.ram_size, cpu_model);
phys_flash = qemu_ram_alloc(NULL, "collie.fl1", 0x02000000);
dinfo = drive_get(IF_PFLASH, 0, 0);
pflash_cfi01_register(SA_CS0, phys_flash,
dinfo ? dinfo->bdrv : NULL, (64 * 1024),
512, 4, 0x00, 0x00, 0x00, 0x00, 0);
phys_flash = qemu_ram_alloc(NULL, "collie.fl2", 0x02000000);
dinfo = drive_get(IF_PFLASH, 0, 1);
pflash_cfi01_register(SA_CS1, phys_flash,
dinfo ? dinfo->bdrv : NULL, (64 * 1024),
512, 4, 0x00, 0x00, 0x00, 0x00, 0);
sysbus_create_simple("scoop", 0x40800000, NULL);
collie_binfo.kernel_filename = kernel_filename;
collie_binfo.kernel_cmdline = kernel_cmdline;
collie_binfo.initrd_filename = initrd_filename;
collie_binfo.board_id = 0x208;
arm_load_kernel(s->env, &collie_binfo);
}
static void apic_common_realize(DeviceState *dev, Error **errp)
{
APICCommonState *s = APIC_COMMON(dev);
APICCommonClass *info;
static DeviceState *vapic;
int instance_id = s->id;
info = APIC_COMMON_GET_CLASS(s);
info->realize(dev, errp);
/* Note: We need at least 1M to map the VAPIC option ROM */
if (!vapic && s->vapic_control & VAPIC_ENABLE_MASK &&
ram_size >= 1024 * 1024) {
vapic = sysbus_create_simple("kvmvapic", -1, NULL);
}
s->vapic = vapic;
if (apic_report_tpr_access && info->enable_tpr_reporting) {
info->enable_tpr_reporting(s, true);
}
if (s->legacy_instance_id) {
instance_id = -1;
}
vmstate_register_with_alias_id(NULL, instance_id, &vmstate_apic_common,
s, -1, 0);
}
static int apic_init_common(SysBusDevice *dev)
{
APICCommonState *s = APIC_COMMON(dev);
APICCommonClass *info;
static DeviceState *vapic;
static int apic_no;
if (apic_no >= MAX_APICS) {
return -1;
}
s->idx = apic_no++;
info = APIC_COMMON_GET_CLASS(s);
info->init(s);
sysbus_init_mmio(dev, &s->io_memory);
/* Note: We need at least 1M to map the VAPIC option ROM */
if (!vapic && s->vapic_control & VAPIC_ENABLE_MASK &&
ram_size >= 1024 * 1024) {
vapic = sysbus_create_simple("kvmvapic", -1, NULL);
}
s->vapic = vapic;
if (apic_report_tpr_access && info->enable_tpr_reporting) {
info->enable_tpr_reporting(s, true);
}
return 0;
}
static void apic_common_realize(DeviceState *dev, Error **errp)
{
APICCommonState *s = APIC_COMMON(dev);
APICCommonClass *info;
static DeviceState *vapic;
static int apic_no;
static bool mmio_registered;
if (apic_no >= MAX_APICS) {
error_setg(errp, "%s initialization failed.",
object_get_typename(OBJECT(dev)));
return;
}
s->idx = apic_no++;
info = APIC_COMMON_GET_CLASS(s);
info->realize(dev, errp);
if (!mmio_registered) {
ICCBus *b = ICC_BUS(qdev_get_parent_bus(dev));
memory_region_add_subregion(b->apic_address_space, 0, &s->io_memory);
mmio_registered = true;
}
/* Note: We need at least 1M to map the VAPIC option ROM */
if (!vapic && s->vapic_control & VAPIC_ENABLE_MASK &&
ram_size >= 1024 * 1024) {
vapic = sysbus_create_simple("kvmvapic", -1, NULL);
}
s->vapic = vapic;
if (apic_report_tpr_access && info->enable_tpr_reporting) {
info->enable_tpr_reporting(s, true);
}
}
/* Note: Must be called after VCPU initialization. */
void kvmclock_create(void)
{
if (kvm_enabled() &&
first_cpu->cpuid_kvm_features & (1ULL << KVM_FEATURE_CLOCKSOURCE)) {
sysbus_create_simple("kvmclock", -1, NULL);
}
}
static void apic_common_realize(DeviceState *dev, Error **errp)
{
APICCommonState *s = APIC_COMMON(dev);
APICCommonClass *info;
static DeviceState *vapic;
static int apic_no;
if (apic_no >= MAX_APICS) {
error_setg(errp, "%s initialization failed.",
object_get_typename(OBJECT(dev)));
return;
}
s->idx = apic_no++;
info = APIC_COMMON_GET_CLASS(s);
info->realize(dev, errp);
/* Note: We need at least 1M to map the VAPIC option ROM */
if (!vapic && s->vapic_control & VAPIC_ENABLE_MASK &&
ram_size >= 1024 * 1024) {
vapic = sysbus_create_simple("kvmvapic", -1, NULL);
}
s->vapic = vapic;
if (apic_report_tpr_access && info->enable_tpr_reporting) {
info->enable_tpr_reporting(s, true);
}
}
static void collie_init(QEMUMachineInitArgs *args)
{
const char *cpu_model = args->cpu_model;
const char *kernel_filename = args->kernel_filename;
const char *kernel_cmdline = args->kernel_cmdline;
const char *initrd_filename = args->initrd_filename;
StrongARMState *s;
DriveInfo *dinfo;
MemoryRegion *sysmem = get_system_memory();
if (!cpu_model) {
cpu_model = "sa1110";
}
s = sa1110_init(sysmem, collie_binfo.ram_size, cpu_model);
dinfo = drive_get(IF_PFLASH, 0, 0);
pflash_cfi01_register(SA_CS0, NULL, "collie.fl1", 0x02000000,
dinfo ? dinfo->bdrv : NULL, (64 * 1024),
512, 4, 0x00, 0x00, 0x00, 0x00, 0);
dinfo = drive_get(IF_PFLASH, 0, 1);
pflash_cfi01_register(SA_CS1, NULL, "collie.fl2", 0x02000000,
dinfo ? dinfo->bdrv : NULL, (64 * 1024),
512, 4, 0x00, 0x00, 0x00, 0x00, 0);
sysbus_create_simple("scoop", 0x40800000, NULL);
collie_binfo.kernel_filename = kernel_filename;
collie_binfo.kernel_cmdline = kernel_cmdline;
collie_binfo.initrd_filename = initrd_filename;
collie_binfo.board_id = 0x208;
arm_load_kernel(s->cpu, &collie_binfo);
}
static void stm32l152rbt6_init(ram_addr_t ram_size, const char *boot_device, const char *kernel_filename, const char *kernel_cmdline, const char *initrd_filename, const char *cpu_model) {
//Préparation de la mémoire
MemoryRegion *address_space_mem = get_system_memory();
uint16_t flash_size = stm32_board.f_size; //128KBits
uint16_t sram_size = 0x0010; //16 KBits
//Initialisation du processeur (+ mémoire)
qemu_irq* pic = armv7m_init(address_space_mem, flash_size, sram_size, kernel_filename, cpu_model);
stm32l_sys_init(0x1FF00000, pic[28], &stm32_board); //FIXME: Vérifier l'implémentation de la sys memory
//Structures GPIO
static const uint32_t gpio_addr[NB_GPIO] = {
0x40020000, //GPIO_A
0x40020400, //GPIO_B
0x40020800, //GPIO_C
0x40020C00, //GPIO_D
0x40021000, //GPIO_E
0x40021400 //GPIO_H
};
// static const int gpio_idIrqNVIC[NB_NVIC_IRQ] = {6,7,8,9,10};
DeviceState* gpio_dev[NB_GPIO];
//Création du bouton
DeviceState* button = sysbus_create_simple("stm32_button", -1, NULL);
//Création des leds
DeviceState* led_dev6 = sysbus_create_simple("stm32_led_blue", -1, NULL);
DeviceState* led_dev7 = sysbus_create_simple("stm32_led_green", -1, NULL);
//Initialisation du GPIO_A
gpio_dev[GPIO_A] = sysbus_create_varargs("stm32_gpio_A", gpio_addr[GPIO_A], NULL); //, pic[gpio_idIrqNVIC[0]], pic[gpio_idIrqNVIC[1]], pic[gpio_idIrqNVIC[2]], pic[gpio_idIrqNVIC[3]], pic[gpio_idIrqNVIC[4]], NULL);
qemu_irq entreeBouton = qdev_get_gpio_in(gpio_dev[GPIO_A], 0);
qdev_connect_gpio_out(button, 0, entreeBouton);
//Initialisation du GPIO_B
gpio_dev[GPIO_B] = sysbus_create_varargs("stm32_gpio_B", gpio_addr[GPIO_B], NULL); //, pic[gpio_idIrqNVIC[0]], pic[gpio_idIrqNVIC[1]], pic[gpio_idIrqNVIC[2]], pic[gpio_idIrqNVIC[3]], pic[gpio_idIrqNVIC[4]], NULL);
qemu_irq entreeLED6 = qdev_get_gpio_in(led_dev6, 0);
qdev_connect_gpio_out(gpio_dev[GPIO_B], 6, entreeLED6);
qemu_irq entreeLED7 = qdev_get_gpio_in(led_dev7, 0);
qdev_connect_gpio_out(gpio_dev[GPIO_B], 7, entreeLED7);
}
void pc_basic_device_init(qemu_irq *isa_irq,
FDCtrl **floppy_controller,
ISADevice **rtc_state)
{
int i;
DriveInfo *fd[MAX_FD];
PITState *pit;
qemu_irq rtc_irq = NULL;
qemu_irq *a20_line;
ISADevice *i8042;
qemu_irq *cpu_exit_irq;
register_ioport_write(0x80, 1, 1, ioport80_write, NULL);
register_ioport_write(0xf0, 1, 1, ioportF0_write, NULL);
if (!no_hpet) {
DeviceState *hpet = sysbus_create_simple("hpet", HPET_BASE, NULL);
for (i = 0; i < 24; i++) {
sysbus_connect_irq(sysbus_from_qdev(hpet), i, isa_irq[i]);
}
rtc_irq = qdev_get_gpio_in(hpet, 0);
}
*rtc_state = rtc_init(2000, rtc_irq);
qemu_register_boot_set(pc_boot_set, *rtc_state);
pit = pit_init(0x40, isa_reserve_irq(0));
pcspk_init(pit);
for(i = 0; i < MAX_SERIAL_PORTS; i++) {
if (serial_hds[i]) {
serial_isa_init(i, serial_hds[i]);
}
}
for(i = 0; i < MAX_PARALLEL_PORTS; i++) {
if (parallel_hds[i]) {
parallel_init(i, parallel_hds[i]);
}
}
a20_line = qemu_allocate_irqs(handle_a20_line_change, first_cpu, 1);
i8042 = isa_create_simple("i8042");
i8042_setup_a20_line(i8042, a20_line);
vmmouse_init(i8042);
cpu_exit_irq = qemu_allocate_irqs(cpu_request_exit, NULL, 1);
DMA_init(0, cpu_exit_irq);
for(i = 0; i < MAX_FD; i++) {
fd[i] = drive_get(IF_FLOPPY, 0, i);
}
*floppy_controller = fdctrl_init_isa(fd);
}
/* Note: Must be called after VCPU initialization. */
void kvmclock_create(void)
{
X86CPU *cpu = X86_CPU(first_cpu);
if (kvm_enabled() &&
cpu->env.features[FEAT_KVM] & ((1ULL << KVM_FEATURE_CLOCKSOURCE) |
(1ULL << KVM_FEATURE_CLOCKSOURCE2))) {
sysbus_create_simple(TYPE_KVM_CLOCK, -1, NULL);
}
}
static void
petalogix_s3adsp1800_init(QEMUMachineInitArgs *args)
{
ram_addr_t ram_size = args->ram_size;
const char *cpu_model = args->cpu_model;
DeviceState *dev;
MicroBlazeCPU *cpu;
CPUMBState *env;
DriveInfo *dinfo;
int i;
hwaddr ddr_base = MEMORY_BASEADDR;
MemoryRegion *phys_lmb_bram = g_new(MemoryRegion, 1);
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq irq[32], *cpu_irq;
MemoryRegion *sysmem = get_system_memory();
/* init CPUs */
if (cpu_model == NULL) {
cpu_model = "microblaze";
}
cpu = cpu_mb_init(cpu_model);
env = &cpu->env;
/* Attach emulated BRAM through the LMB. */
memory_region_init_ram(phys_lmb_bram,
"petalogix_s3adsp1800.lmb_bram", LMB_BRAM_SIZE);
vmstate_register_ram_global(phys_lmb_bram);
memory_region_add_subregion(sysmem, 0x00000000, phys_lmb_bram);
memory_region_init_ram(phys_ram, "petalogix_s3adsp1800.ram", ram_size);
vmstate_register_ram_global(phys_ram);
memory_region_add_subregion(sysmem, ddr_base, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
pflash_cfi01_register(FLASH_BASEADDR,
NULL, "petalogix_s3adsp1800.flash", FLASH_SIZE,
dinfo ? dinfo->bdrv : NULL, (64 * 1024),
FLASH_SIZE >> 16,
1, 0x89, 0x18, 0x0000, 0x0, 1);
cpu_irq = microblaze_pic_init_cpu(env);
dev = xilinx_intc_create(INTC_BASEADDR, cpu_irq[0], 2);
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(dev, i);
}
sysbus_create_simple("xlnx.xps-uartlite", UARTLITE_BASEADDR, irq[3]);
/* 2 timers at irq 2 @ 62 Mhz. */
xilinx_timer_create(TIMER_BASEADDR, irq[0], 0, 62 * 1000000);
xilinx_ethlite_create(&nd_table[0], ETHLITE_BASEADDR, irq[1], 0, 0);
microblaze_load_kernel(cpu, ddr_base, ram_size,
BINARY_DEVICE_TREE_FILE, machine_cpu_reset);
}
static inline void zynq_init_zc70x_i2c(uint32_t base_addr, qemu_irq irq)
{
DeviceState *dev = sysbus_create_simple("cdns.i2c-r1p10", base_addr, irq);
I2CBus *i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c");
int i, bus;
dev = i2c_create_slave(i2c, "pca9548", 0);
for (bus = 2; bus <= 3; bus++) {
char bus_name[16];
snprintf(bus_name, sizeof(bus_name), "i2c@%d", bus);
i2c = (I2CBus *)qdev_get_child_bus(dev, bus_name);
assert(i2c);
assert(NUM_I2C_EEPROMS <= 2); /* not enough address space for anymore */
for (i = 0; i < NUM_I2C_EEPROMS; ++i) {
DeviceState *eeprom_dev = i2c_create_slave_no_init(i2c, "at.24c08",
0x50 + 0x4 * i);
qdev_prop_set_uint16(eeprom_dev, "size", 1024); /* M24C08 */
qdev_init_nofail(eeprom_dev);
}
}
}
static void a9_daughterboard_init(const VEDBoardInfo *daughterboard,
ram_addr_t ram_size,
const char *cpu_model,
qemu_irq *pic)
{
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *lowram = g_new(MemoryRegion, 1);
DeviceState *dev;
SysBusDevice *busdev;
int n;
qemu_irq cpu_irq[4];
ram_addr_t low_ram_size;
if (!cpu_model) {
cpu_model = "cortex-a9";
}
for (n = 0; n < smp_cpus; n++) {
ARMCPU *cpu = cpu_arm_init(cpu_model);
if (!cpu) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ);
}
if (ram_size > 0x40000000) {
/* 1GB is the maximum the address space permits */
fprintf(stderr, "vexpress-a9: cannot model more than 1GB RAM\n");
exit(1);
}
memory_region_init_ram(ram, NULL, "vexpress.highmem", ram_size);
vmstate_register_ram_global(ram);
low_ram_size = ram_size;
if (low_ram_size > 0x4000000) {
low_ram_size = 0x4000000;
}
/* RAM is from 0x60000000 upwards. The bottom 64MB of the
* address space should in theory be remappable to various
* things including ROM or RAM; we always map the RAM there.
*/
memory_region_init_alias(lowram, NULL, "vexpress.lowmem", ram, 0, low_ram_size);
memory_region_add_subregion(sysmem, 0x0, lowram);
memory_region_add_subregion(sysmem, 0x60000000, ram);
/* 0x1e000000 A9MPCore (SCU) private memory region */
dev = qdev_create(NULL, "a9mpcore_priv");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0x1e000000);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
/* Interrupts [42:0] are from the motherboard;
* [47:43] are reserved; [63:48] are daughterboard
* peripherals. Note that some documentation numbers
* external interrupts starting from 32 (because the
* A9MP has internal interrupts 0..31).
*/
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
/* Daughterboard peripherals : 0x10020000 .. 0x20000000 */
/* 0x10020000 PL111 CLCD (daughterboard) */
sysbus_create_simple("pl111", 0x10020000, pic[44]);
/* 0x10060000 AXI RAM */
/* 0x100e0000 PL341 Dynamic Memory Controller */
/* 0x100e1000 PL354 Static Memory Controller */
/* 0x100e2000 System Configuration Controller */
sysbus_create_simple("sp804", 0x100e4000, pic[48]);
/* 0x100e5000 SP805 Watchdog module */
/* 0x100e6000 BP147 TrustZone Protection Controller */
/* 0x100e9000 PL301 'Fast' AXI matrix */
/* 0x100ea000 PL301 'Slow' AXI matrix */
/* 0x100ec000 TrustZone Address Space Controller */
/* 0x10200000 CoreSight debug APB */
/* 0x1e00a000 PL310 L2 Cache Controller */
sysbus_create_varargs("l2x0", 0x1e00a000, NULL);
}
/* ram_size must be set to match the upper bound of memory in the
* device tree (linux/arch/arm/boot/dts/highbank.dts), which is
* normally 0xff900000 or -m 4089. When running this board on a
* 32-bit host, set the reg value of memory to 0xf7ff00000 in the
* device tree and pass -m 2047 to QEMU.
*/
static void calxeda_init(MachineState *machine, enum cxmachines machine_id)
{
ram_addr_t ram_size = machine->ram_size;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
DeviceState *dev = NULL;
SysBusDevice *busdev;
qemu_irq pic[128];
int n;
qemu_irq cpu_irq[4];
qemu_irq cpu_fiq[4];
MemoryRegion *sysram;
MemoryRegion *dram;
MemoryRegion *sysmem;
char *sysboot_filename;
switch (machine_id) {
case CALXEDA_HIGHBANK:
machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a9");
break;
case CALXEDA_MIDWAY:
machine->cpu_type = ARM_CPU_TYPE_NAME("cortex-a15");
break;
default:
assert(0);
}
for (n = 0; n < smp_cpus; n++) {
Object *cpuobj;
ARMCPU *cpu;
cpuobj = object_new(machine->cpu_type);
cpu = ARM_CPU(cpuobj);
object_property_set_int(cpuobj, QEMU_PSCI_CONDUIT_SMC,
"psci-conduit", &error_abort);
if (n) {
/* Secondary CPUs start in PSCI powered-down state */
object_property_set_bool(cpuobj, true,
"start-powered-off", &error_abort);
}
if (object_property_find(cpuobj, "reset-cbar", NULL)) {
object_property_set_int(cpuobj, MPCORE_PERIPHBASE,
"reset-cbar", &error_abort);
}
object_property_set_bool(cpuobj, true, "realized", &error_fatal);
cpu_irq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ);
cpu_fiq[n] = qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_FIQ);
}
sysmem = get_system_memory();
dram = g_new(MemoryRegion, 1);
memory_region_allocate_system_memory(dram, NULL, "highbank.dram", ram_size);
/* SDRAM at address zero. */
memory_region_add_subregion(sysmem, 0, dram);
sysram = g_new(MemoryRegion, 1);
memory_region_init_ram_nomigrate(sysram, NULL, "highbank.sysram", 0x8000,
&error_fatal);
memory_region_add_subregion(sysmem, 0xfff88000, sysram);
if (bios_name != NULL) {
sysboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (sysboot_filename != NULL) {
if (load_image_targphys(sysboot_filename, 0xfff88000, 0x8000) < 0) {
error_report("Unable to load %s", bios_name);
exit(1);
}
g_free(sysboot_filename);
} else {
error_report("Unable to find %s", bios_name);
exit(1);
}
}
switch (machine_id) {
case CALXEDA_HIGHBANK:
dev = qdev_create(NULL, "l2x0");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff12000);
dev = qdev_create(NULL, TYPE_A9MPCORE_PRIV);
break;
case CALXEDA_MIDWAY:
dev = qdev_create(NULL, TYPE_A15MPCORE_PRIV);
break;
}
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_prop_set_uint32(dev, "num-irq", NIRQ_GIC);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
sysbus_connect_irq(busdev, n + smp_cpus, cpu_fiq[n]);
}
for (n = 0; n < 128; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
dev = qdev_create(NULL, "sp804");
qdev_prop_set_uint32(dev, "freq0", 150000000);
qdev_prop_set_uint32(dev, "freq1", 150000000);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff34000);
sysbus_connect_irq(busdev, 0, pic[18]);
pl011_create(0xfff36000, pic[20], serial_hds[0]);
dev = qdev_create(NULL, TYPE_HIGHBANK_REGISTERS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xfff3c000);
sysbus_create_simple("pl061", 0xfff30000, pic[14]);
sysbus_create_simple("pl061", 0xfff31000, pic[15]);
sysbus_create_simple("pl061", 0xfff32000, pic[16]);
sysbus_create_simple("pl061", 0xfff33000, pic[17]);
sysbus_create_simple("pl031", 0xfff35000, pic[19]);
sysbus_create_simple("pl022", 0xfff39000, pic[23]);
sysbus_create_simple(TYPE_SYSBUS_AHCI, 0xffe08000, pic[83]);
if (nd_table[0].used) {
qemu_check_nic_model(&nd_table[0], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[0]);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff50000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[77]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[78]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[79]);
qemu_check_nic_model(&nd_table[1], "xgmac");
dev = qdev_create(NULL, "xgmac");
qdev_set_nic_properties(dev, &nd_table[1]);
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xfff51000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[80]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1, pic[81]);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2, pic[82]);
}
/* TODO create and connect IDE devices for ide_drive_get() */
highbank_binfo.ram_size = ram_size;
highbank_binfo.kernel_filename = kernel_filename;
highbank_binfo.kernel_cmdline = kernel_cmdline;
highbank_binfo.initrd_filename = initrd_filename;
/* highbank requires a dtb in order to boot, and the dtb will override
* the board ID. The following value is ignored, so set it to -1 to be
* clear that the value is meaningless.
*/
highbank_binfo.board_id = -1;
highbank_binfo.nb_cpus = smp_cpus;
highbank_binfo.loader_start = 0;
highbank_binfo.write_secondary_boot = hb_write_secondary;
highbank_binfo.secondary_cpu_reset_hook = hb_reset_secondary;
if (!kvm_enabled()) {
highbank_binfo.board_setup_addr = BOARD_SETUP_ADDR;
highbank_binfo.write_board_setup = hb_write_board_setup;
highbank_binfo.secure_board_setup = true;
} else {
warn_report("cannot load built-in Monitor support "
"if KVM is enabled. Some guests (such as Linux) "
"may not boot.");
}
arm_load_kernel(ARM_CPU(first_cpu), &highbank_binfo);
}
static void sun4m_hw_init(const struct sun4m_hwdef *hwdef,
MachineState *machine)
{
const char *cpu_model = machine->cpu_model;
unsigned int i;
void *iommu, *espdma, *ledma, *nvram;
qemu_irq *cpu_irqs[MAX_CPUS], slavio_irq[32], slavio_cpu_irq[MAX_CPUS],
espdma_irq, ledma_irq;
qemu_irq esp_reset, dma_enable;
qemu_irq fdc_tc;
qemu_irq *cpu_halt;
unsigned long kernel_size;
DriveInfo *fd[MAX_FD];
FWCfgState *fw_cfg;
unsigned int num_vsimms;
/* init CPUs */
if (!cpu_model)
cpu_model = hwdef->default_cpu_model;
for(i = 0; i < smp_cpus; i++) {
cpu_devinit(cpu_model, i, hwdef->slavio_base, &cpu_irqs[i]);
}
for (i = smp_cpus; i < MAX_CPUS; i++)
cpu_irqs[i] = qemu_allocate_irqs(dummy_cpu_set_irq, NULL, MAX_PILS);
/* set up devices */
ram_init(0, machine->ram_size, hwdef->max_mem);
/* models without ECC don't trap when missing ram is accessed */
if (!hwdef->ecc_base) {
empty_slot_init(machine->ram_size, hwdef->max_mem - machine->ram_size);
}
prom_init(hwdef->slavio_base, bios_name);
slavio_intctl = slavio_intctl_init(hwdef->intctl_base,
hwdef->intctl_base + 0x10000ULL,
cpu_irqs);
for (i = 0; i < 32; i++) {
slavio_irq[i] = qdev_get_gpio_in(slavio_intctl, i);
}
for (i = 0; i < MAX_CPUS; i++) {
slavio_cpu_irq[i] = qdev_get_gpio_in(slavio_intctl, 32 + i);
}
if (hwdef->idreg_base) {
idreg_init(hwdef->idreg_base);
}
if (hwdef->afx_base) {
afx_init(hwdef->afx_base);
}
iommu = iommu_init(hwdef->iommu_base, hwdef->iommu_version,
slavio_irq[30]);
if (hwdef->iommu_pad_base) {
/* On the real hardware (SS-5, LX) the MMU is not padded, but aliased.
Software shouldn't use aliased addresses, neither should it crash
when does. Using empty_slot instead of aliasing can help with
debugging such accesses */
empty_slot_init(hwdef->iommu_pad_base,hwdef->iommu_pad_len);
}
espdma = sparc32_dma_init(hwdef->dma_base, slavio_irq[18],
iommu, &espdma_irq, 0);
ledma = sparc32_dma_init(hwdef->dma_base + 16ULL,
slavio_irq[16], iommu, &ledma_irq, 1);
if (graphic_depth != 8 && graphic_depth != 24) {
error_report("Unsupported depth: %d", graphic_depth);
exit (1);
}
num_vsimms = 0;
if (num_vsimms == 0) {
if (vga_interface_type == VGA_CG3) {
if (graphic_depth != 8) {
error_report("Unsupported depth: %d", graphic_depth);
exit(1);
}
if (!(graphic_width == 1024 && graphic_height == 768) &&
!(graphic_width == 1152 && graphic_height == 900)) {
error_report("Unsupported resolution: %d x %d", graphic_width,
graphic_height);
exit(1);
}
/* sbus irq 5 */
cg3_init(hwdef->tcx_base, slavio_irq[11], 0x00100000,
graphic_width, graphic_height, graphic_depth);
} else {
/* If no display specified, default to TCX */
if (graphic_depth != 8 && graphic_depth != 24) {
error_report("Unsupported depth: %d", graphic_depth);
exit(1);
}
if (!(graphic_width == 1024 && graphic_height == 768)) {
error_report("Unsupported resolution: %d x %d",
graphic_width, graphic_height);
exit(1);
}
tcx_init(hwdef->tcx_base, slavio_irq[11], 0x00100000,
graphic_width, graphic_height, graphic_depth);
}
}
for (i = num_vsimms; i < MAX_VSIMMS; i++) {
/* vsimm registers probed by OBP */
if (hwdef->vsimm[i].reg_base) {
empty_slot_init(hwdef->vsimm[i].reg_base, 0x2000);
}
}
if (hwdef->sx_base) {
empty_slot_init(hwdef->sx_base, 0x2000);
}
lance_init(&nd_table[0], hwdef->le_base, ledma, ledma_irq);
nvram = m48t59_init(slavio_irq[0], hwdef->nvram_base, 0, 0x2000, 8);
slavio_timer_init_all(hwdef->counter_base, slavio_irq[19], slavio_cpu_irq, smp_cpus);
slavio_serial_ms_kbd_init(hwdef->ms_kb_base, slavio_irq[14],
display_type == DT_NOGRAPHIC, ESCC_CLOCK, 1);
/* Slavio TTYA (base+4, Linux ttyS0) is the first QEMU serial device
Slavio TTYB (base+0, Linux ttyS1) is the second QEMU serial device */
escc_init(hwdef->serial_base, slavio_irq[15], slavio_irq[15],
serial_hds[0], serial_hds[1], ESCC_CLOCK, 1);
cpu_halt = qemu_allocate_irqs(cpu_halt_signal, NULL, 1);
if (hwdef->apc_base) {
apc_init(hwdef->apc_base, cpu_halt[0]);
}
if (hwdef->fd_base) {
/* there is zero or one floppy drive */
memset(fd, 0, sizeof(fd));
fd[0] = drive_get(IF_FLOPPY, 0, 0);
sun4m_fdctrl_init(slavio_irq[22], hwdef->fd_base, fd,
&fdc_tc);
} else {
fdc_tc = *qemu_allocate_irqs(dummy_fdc_tc, NULL, 1);
}
slavio_misc_init(hwdef->slavio_base, hwdef->aux1_base, hwdef->aux2_base,
slavio_irq[30], fdc_tc);
if (drive_get_max_bus(IF_SCSI) > 0) {
fprintf(stderr, "qemu: too many SCSI bus\n");
exit(1);
}
esp_init(hwdef->esp_base, 2,
espdma_memory_read, espdma_memory_write,
espdma, espdma_irq, &esp_reset, &dma_enable);
qdev_connect_gpio_out(espdma, 0, esp_reset);
qdev_connect_gpio_out(espdma, 1, dma_enable);
if (hwdef->cs_base) {
sysbus_create_simple("SUNW,CS4231", hwdef->cs_base,
slavio_irq[5]);
}
if (hwdef->dbri_base) {
/* ISDN chip with attached CS4215 audio codec */
/* prom space */
empty_slot_init(hwdef->dbri_base+0x1000, 0x30);
/* reg space */
empty_slot_init(hwdef->dbri_base+0x10000, 0x100);
}
if (hwdef->bpp_base) {
/* parallel port */
empty_slot_init(hwdef->bpp_base, 0x20);
}
kernel_size = sun4m_load_kernel(machine->kernel_filename,
machine->initrd_filename,
machine->ram_size);
nvram_init(nvram, (uint8_t *)&nd_table[0].macaddr, machine->kernel_cmdline,
machine->boot_order, machine->ram_size, kernel_size,
graphic_width, graphic_height, graphic_depth,
hwdef->nvram_machine_id, "Sun4m");
if (hwdef->ecc_base)
ecc_init(hwdef->ecc_base, slavio_irq[28],
hwdef->ecc_version);
fw_cfg = fw_cfg_init(0, 0, CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)max_cpus);
fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, hwdef->machine_id);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_DEPTH, graphic_depth);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_SUN4M_HEIGHT, graphic_height);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, KERNEL_LOAD_ADDR);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (machine->kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE,
machine->kernel_cmdline);
fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, machine->kernel_cmdline);
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE,
strlen(machine->kernel_cmdline) + 1);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, INITRD_LOAD_ADDR);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, 0); // not used
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, machine->boot_order[0]);
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
static void lm32_evr_init(ram_addr_t ram_size_not_used,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
LM32CPU *cpu;
CPULM32State *env;
DriveInfo *dinfo;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq *cpu_irq, irq[32];
ResetInfo *reset_info;
int i;
/* memory map */
target_phys_addr_t flash_base = 0x04000000;
size_t flash_sector_size = 256 * 1024;
size_t flash_size = 32 * 1024 * 1024;
target_phys_addr_t ram_base = 0x08000000;
size_t ram_size = 64 * 1024 * 1024;
target_phys_addr_t timer0_base = 0x80002000;
target_phys_addr_t uart0_base = 0x80006000;
target_phys_addr_t timer1_base = 0x8000a000;
int uart0_irq = 0;
int timer0_irq = 1;
int timer1_irq = 3;
reset_info = g_malloc0(sizeof(ResetInfo));
if (cpu_model == NULL) {
cpu_model = "lm32-full";
}
cpu = cpu_lm32_init(cpu_model);
env = &cpu->env;
reset_info->cpu = cpu;
reset_info->flash_base = flash_base;
memory_region_init_ram(phys_ram, "lm32_evr.sdram", ram_size);
vmstate_register_ram_global(phys_ram);
memory_region_add_subregion(address_space_mem, ram_base, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* Spansion S29NS128P */
pflash_cfi02_register(flash_base, NULL, "lm32_evr.flash", flash_size,
dinfo ? dinfo->bdrv : NULL, flash_sector_size,
flash_size / flash_sector_size, 1, 2,
0x01, 0x7e, 0x43, 0x00, 0x555, 0x2aa, 1);
/* create irq lines */
cpu_irq = qemu_allocate_irqs(cpu_irq_handler, env, 1);
env->pic_state = lm32_pic_init(*cpu_irq);
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(env->pic_state, i);
}
sysbus_create_simple("lm32-uart", uart0_base, irq[uart0_irq]);
sysbus_create_simple("lm32-timer", timer0_base, irq[timer0_irq]);
sysbus_create_simple("lm32-timer", timer1_base, irq[timer1_irq]);
/* make sure juart isn't the first chardev */
env->juart_state = lm32_juart_init();
reset_info->bootstrap_pc = flash_base;
if (kernel_filename) {
uint64_t entry;
int kernel_size;
kernel_size = load_elf(kernel_filename, NULL, NULL, &entry, NULL, NULL,
1, ELF_MACHINE, 0);
reset_info->bootstrap_pc = entry;
if (kernel_size < 0) {
kernel_size = load_image_targphys(kernel_filename, ram_base,
ram_size);
reset_info->bootstrap_pc = ram_base;
}
if (kernel_size < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
}
qemu_register_reset(main_cpu_reset, reset_info);
}
static void lm32_uclinux_init(ram_addr_t ram_size_not_used,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
LM32CPU *cpu;
CPULM32State *env;
DriveInfo *dinfo;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *phys_ram = g_new(MemoryRegion, 1);
qemu_irq *cpu_irq, irq[32];
HWSetup *hw;
ResetInfo *reset_info;
int i;
/* memory map */
target_phys_addr_t flash_base = 0x04000000;
size_t flash_sector_size = 256 * 1024;
size_t flash_size = 32 * 1024 * 1024;
target_phys_addr_t ram_base = 0x08000000;
size_t ram_size = 64 * 1024 * 1024;
target_phys_addr_t uart0_base = 0x80000000;
target_phys_addr_t timer0_base = 0x80002000;
target_phys_addr_t timer1_base = 0x80010000;
target_phys_addr_t timer2_base = 0x80012000;
int uart0_irq = 0;
int timer0_irq = 1;
int timer1_irq = 20;
int timer2_irq = 21;
target_phys_addr_t hwsetup_base = 0x0bffe000;
target_phys_addr_t cmdline_base = 0x0bfff000;
target_phys_addr_t initrd_base = 0x08400000;
size_t initrd_max = 0x01000000;
reset_info = g_malloc0(sizeof(ResetInfo));
if (cpu_model == NULL) {
cpu_model = "lm32-full";
}
cpu = cpu_lm32_init(cpu_model);
env = &cpu->env;
reset_info->cpu = cpu;
reset_info->flash_base = flash_base;
memory_region_init_ram(phys_ram, "lm32_uclinux.sdram", ram_size);
vmstate_register_ram_global(phys_ram);
memory_region_add_subregion(address_space_mem, ram_base, phys_ram);
dinfo = drive_get(IF_PFLASH, 0, 0);
/* Spansion S29NS128P */
pflash_cfi02_register(flash_base, NULL, "lm32_uclinux.flash", flash_size,
dinfo ? dinfo->bdrv : NULL, flash_sector_size,
flash_size / flash_sector_size, 1, 2,
0x01, 0x7e, 0x43, 0x00, 0x555, 0x2aa, 1);
/* create irq lines */
cpu_irq = qemu_allocate_irqs(cpu_irq_handler, env, 1);
env->pic_state = lm32_pic_init(*cpu_irq);
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(env->pic_state, i);
}
sysbus_create_simple("lm32-uart", uart0_base, irq[uart0_irq]);
sysbus_create_simple("lm32-timer", timer0_base, irq[timer0_irq]);
sysbus_create_simple("lm32-timer", timer1_base, irq[timer1_irq]);
sysbus_create_simple("lm32-timer", timer2_base, irq[timer2_irq]);
/* make sure juart isn't the first chardev */
env->juart_state = lm32_juart_init();
reset_info->bootstrap_pc = flash_base;
if (kernel_filename) {
uint64_t entry;
int kernel_size;
kernel_size = load_elf(kernel_filename, NULL, NULL, &entry, NULL, NULL,
1, ELF_MACHINE, 0);
reset_info->bootstrap_pc = entry;
if (kernel_size < 0) {
kernel_size = load_image_targphys(kernel_filename, ram_base,
ram_size);
reset_info->bootstrap_pc = ram_base;
}
if (kernel_size < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
}
/* generate a rom with the hardware description */
hw = hwsetup_init();
hwsetup_add_cpu(hw, "LM32", 75000000);
hwsetup_add_flash(hw, "flash", flash_base, flash_size);
hwsetup_add_ddr_sdram(hw, "ddr_sdram", ram_base, ram_size);
hwsetup_add_timer(hw, "timer0", timer0_base, timer0_irq);
hwsetup_add_timer(hw, "timer1_dev_only", timer1_base, timer1_irq);
hwsetup_add_timer(hw, "timer2_dev_only", timer2_base, timer2_irq);
hwsetup_add_uart(hw, "uart", uart0_base, uart0_irq);
hwsetup_add_trailer(hw);
hwsetup_create_rom(hw, hwsetup_base);
hwsetup_free(hw);
reset_info->hwsetup_base = hwsetup_base;
if (kernel_cmdline && strlen(kernel_cmdline)) {
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE,
kernel_cmdline);
reset_info->cmdline_base = cmdline_base;
}
if (initrd_filename) {
size_t initrd_size;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
initrd_max);
reset_info->initrd_base = initrd_base;
reset_info->initrd_size = initrd_size;
}
qemu_register_reset(main_cpu_reset, reset_info);
}
static void reptar_init(MachineState *machine)
{
MemoryRegion *sysmem = get_system_memory();
struct reptar_s *s = (struct reptar_s *)g_malloc0(sizeof(*s));
DriveInfo *dmtd = NULL, *dsd = NULL, *pflash = NULL;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
/* (DRE) */
uint32_t pflash_size = 16 << 10; /* 16 KB */
if (ram_size > 1024 * 1024 * 1024) {
fprintf(stderr, "reptar: maximum permitted RAM size 1024MB\n");
exit(1);
}
/* Check if we are in -kernel u-boot.bin mode */
if (kernel_filename) {
/* (DRE) We do the following in order to retrieve the kernel filename during the boot process.
* For example, if qemu was launched with -kernel u-boot.bin */
reptar_binfo.ram_size = ram_size;
reptar_binfo.kernel_filename = kernel_filename;
reptar_binfo.kernel_cmdline = kernel_cmdline;
reptar_binfo.initrd_filename = initrd_filename;
reptar_binfo.loader_start = 0x40014100; /* Start of small bootloader*/
reptar_binfo.board_id = 0;
} else
reptar_binfo.kernel_filename = NULL;
s->cpu = omap3_mpu_init(sysmem, omap3430, ram_size, NULL, NULL, serial_hds[0], NULL);
pflash = drive_get(IF_PFLASH, 0, 0);
if (pflash) {
if (!pflash_cfi02_register(0x30000000,
NULL,
"reptar.nand_flash",
pflash_size,
blk_by_legacy_dinfo(pflash),
sector_len,
pflash_size / sector_len,
1, 2, 0, 0, 0, 0, 0x555, 0x2AA, 0)) {
fprintf(stderr, "qemu: Error registering flash memory.\n");
exit(1);
}
}
else {
dmtd = drive_get(IF_MTD, 0, 0);
s->nand = nand_init(dmtd ? blk_by_legacy_dinfo(dmtd) : NULL, NAND_MFR_MICRON, 0xba);
nand_setpins(s->nand, 0, 0, 0, 1, 0); /* no write-protect */
omap_gpmc_attach_nand(s->cpu->gpmc, REPTAR_NAND_CS, s->nand);
}
/*
* (DRE) Define MMC if any
*/
dsd = drive_get(IF_SD, 0, 0);
if (dsd)
omap3_mmc_attach(s->cpu->omap3_mmc[0], blk_by_legacy_dinfo(dsd), 0, 0);
if (!pflash && !dmtd && !dsd)
hw_error("%s: SD or NAND image required", __FUNCTION__);
/* FAB revs >= 2516: 4030 interrupt is GPIO 0 (earlier ones were 112) */
s->twl4030 = twl4030_init(omap_i2c_bus(s->cpu->i2c[0]),
qdev_get_gpio_in(s->cpu->gpio, 0),
NULL,
NULL);
/* Wire up an I2C slave which returns EDID monitor information;
* newer Linux kernels won't turn on the display unless they
* detect a monitor over DDC.
*/
s->ddc = i2c_create_slave(omap_i2c_bus(s->cpu->i2c[2]), "i2c-ddc", 0x50);
omap_lcd_panel_attach(s->cpu->dss);
/* Strictly this should be a LAN9221 */
#if 0
if (nd_table[0].vlan) {
#endif /* 0 */
/* The ethernet chip hangs off the GPMC */
NICInfo *nd = &nd_table[0];
qemu_check_nic_model(nd, "lan9118");
s->eth = qdev_create(NULL, "lan9118");
qdev_set_nic_properties(s->eth, nd);
qdev_init_nofail(s->eth);
omap_gpmc_attach(s->cpu->gpmc, REPTAR_NET_CS,
sysbus_mmio_get_region(SYS_BUS_DEVICE(s->eth), 0));
sysbus_connect_irq(SYS_BUS_DEVICE(s->eth), 0, qdev_get_gpio_in(s->cpu->gpio, 29));
#if 0
}
#endif /* 0 */
// Create reptar_sp6 with it's base address
s->sp6 = sysbus_create_simple("reptar_sp6",0x18000000,NULL);
// Connect reptar_sp6 to GPIO10 for the IRQ
sysbus_connect_irq(SYS_BUS_DEVICE(s->sp6), 0, qdev_get_gpio_in(s->cpu->gpio, 10));
}
static void vexpress_common_init(MachineState *machine)
{
VexpressMachineState *vms = VEXPRESS_MACHINE(machine);
VexpressMachineClass *vmc = VEXPRESS_MACHINE_GET_CLASS(machine);
VEDBoardInfo *daughterboard = vmc->daughterboard;
DeviceState *dev, *sysctl, *pl041;
qemu_irq pic[64];
uint32_t sys_id;
DriveInfo *dinfo;
pflash_t *pflash0;
ram_addr_t vram_size, sram_size;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *vram = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
MemoryRegion *flashalias = g_new(MemoryRegion, 1);
MemoryRegion *flash0mem;
const hwaddr *map = daughterboard->motherboard_map;
int i;
daughterboard->init(vms, machine->ram_size, machine->cpu_model, pic);
/*
* If a bios file was provided, attempt to map it into memory
*/
if (bios_name) {
char *fn;
int image_size;
if (drive_get(IF_PFLASH, 0, 0)) {
error_report("The contents of the first flash device may be "
"specified with -bios or with -drive if=pflash... "
"but you cannot use both options at once");
exit(1);
}
fn = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
if (!fn) {
error_report("Could not find ROM image '%s'", bios_name);
exit(1);
}
image_size = load_image_targphys(fn, map[VE_NORFLASH0],
VEXPRESS_FLASH_SIZE);
g_free(fn);
if (image_size < 0) {
error_report("Could not load ROM image '%s'", bios_name);
exit(1);
}
}
/* Motherboard peripherals: the wiring is the same but the
* addresses vary between the legacy and A-Series memory maps.
*/
sys_id = 0x1190f500;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_prop_set_uint32(sysctl, "proc_id", daughterboard->proc_id);
qdev_prop_set_uint32(sysctl, "len-db-voltage",
daughterboard->num_voltage_sensors);
for (i = 0; i < daughterboard->num_voltage_sensors; i++) {
char *propname = g_strdup_printf("db-voltage[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->voltages[i]);
g_free(propname);
}
qdev_prop_set_uint32(sysctl, "len-db-clock",
daughterboard->num_clocks);
for (i = 0; i < daughterboard->num_clocks; i++) {
char *propname = g_strdup_printf("db-clock[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->clocks[i]);
g_free(propname);
}
qdev_init_nofail(sysctl);
sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, map[VE_SYSREGS]);
/* VE_SP810: not modelled */
/* VE_SERIALPCI: not modelled */
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, map[VE_PL041]);
sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[11]);
dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL);
/* Wire up MMC card detect and read-only signals */
qdev_connect_gpio_out(dev, 0,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT));
qdev_connect_gpio_out(dev, 1,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN));
sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]);
sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]);
sysbus_create_simple("pl011", map[VE_UART0], pic[5]);
sysbus_create_simple("pl011", map[VE_UART1], pic[6]);
sysbus_create_simple("pl011", map[VE_UART2], pic[7]);
sysbus_create_simple("pl011", map[VE_UART3], pic[8]);
sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]);
sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]);
/* VE_SERIALDVI: not modelled */
sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */
/* VE_COMPACTFLASH: not modelled */
sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
dinfo = drive_get_next(IF_PFLASH);
pflash0 = ve_pflash_cfi01_register(map[VE_NORFLASH0], "vexpress.flash0",
dinfo);
if (!pflash0) {
fprintf(stderr, "vexpress: error registering flash 0.\n");
exit(1);
}
if (map[VE_NORFLASHALIAS] != -1) {
/* Map flash 0 as an alias into low memory */
flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0);
memory_region_init_alias(flashalias, NULL, "vexpress.flashalias",
flash0mem, 0, VEXPRESS_FLASH_SIZE);
memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias);
}
dinfo = drive_get_next(IF_PFLASH);
if (!ve_pflash_cfi01_register(map[VE_NORFLASH1], "vexpress.flash1",
dinfo)) {
fprintf(stderr, "vexpress: error registering flash 1.\n");
exit(1);
}
sram_size = 0x2000000;
memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size,
&error_abort);
vmstate_register_ram_global(sram);
memory_region_add_subregion(sysmem, map[VE_SRAM], sram);
vram_size = 0x800000;
memory_region_init_ram(vram, NULL, "vexpress.vram", vram_size,
&error_abort);
vmstate_register_ram_global(vram);
memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].used) {
lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]);
}
/* VE_USB: not modelled */
/* VE_DAPROM: not modelled */
/* Create mmio transports, so the user can create virtio backends
* (which will be automatically plugged in to the transports). If
* no backend is created the transport will just sit harmlessly idle.
*/
for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) {
sysbus_create_simple("virtio-mmio", map[VE_VIRTIO] + 0x200 * i,
pic[40 + i]);
}
daughterboard->bootinfo.ram_size = machine->ram_size;
daughterboard->bootinfo.kernel_filename = machine->kernel_filename;
daughterboard->bootinfo.kernel_cmdline = machine->kernel_cmdline;
daughterboard->bootinfo.initrd_filename = machine->initrd_filename;
daughterboard->bootinfo.nb_cpus = smp_cpus;
daughterboard->bootinfo.board_id = VEXPRESS_BOARD_ID;
daughterboard->bootinfo.loader_start = daughterboard->loader_start;
daughterboard->bootinfo.smp_loader_start = map[VE_SRAM];
daughterboard->bootinfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
daughterboard->bootinfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr;
daughterboard->bootinfo.modify_dtb = vexpress_modify_dtb;
/* Indicate that when booting Linux we should be in secure state */
daughterboard->bootinfo.secure_boot = true;
arm_load_kernel(ARM_CPU(first_cpu), &daughterboard->bootinfo);
}
static void
petalogix_s3adsp1800_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
DeviceState *dev;
CPUState *env;
int kernel_size;
DriveInfo *dinfo;
int i;
target_phys_addr_t ddr_base = 0x90000000;
ram_addr_t phys_lmb_bram;
ram_addr_t phys_ram;
ram_addr_t phys_flash;
qemu_irq irq[32], *cpu_irq;
/* init CPUs */
if (cpu_model == NULL) {
cpu_model = "microblaze";
}
env = cpu_init(cpu_model);
env->pvr.regs[10] = 0x0c000000; /* spartan 3a dsp family. */
qemu_register_reset(main_cpu_reset, env);
/* Attach emulated BRAM through the LMB. */
phys_lmb_bram = qemu_ram_alloc(LMB_BRAM_SIZE);
cpu_register_physical_memory(0x00000000, LMB_BRAM_SIZE,
phys_lmb_bram | IO_MEM_RAM);
phys_ram = qemu_ram_alloc(ram_size);
cpu_register_physical_memory(ddr_base, ram_size, phys_ram | IO_MEM_RAM);
phys_flash = qemu_ram_alloc(FLASH_SIZE);
dinfo = drive_get(IF_PFLASH, 0, 0);
pflash_cfi02_register(0xa0000000, phys_flash,
dinfo ? dinfo->bdrv : NULL, (64 * 1024),
FLASH_SIZE >> 16,
1, 1, 0x0000, 0x0000, 0x0000, 0x0000,
0x555, 0x2aa);
cpu_irq = microblaze_pic_init_cpu(env);
dev = xilinx_intc_create(0x81800000, cpu_irq[0], 2);
for (i = 0; i < 32; i++) {
irq[i] = qdev_get_gpio_in(dev, i);
}
sysbus_create_simple("xilinx,uartlite", 0x84000000, irq[3]);
/* 2 timers at irq 2 @ 62 Mhz. */
xilinx_timer_create(0x83c00000, irq[0], 2, 62 * 1000000);
xilinx_ethlite_create(&nd_table[0], 0x81000000, irq[1], 0, 0);
if (kernel_filename) {
uint64_t entry, low, high;
int kcmdline_len;
uint32_t base32;
/* Boots a kernel elf binary. */
kernel_size = load_elf(kernel_filename, 0,
&entry, &low, &high,
1, ELF_MACHINE, 0);
base32 = entry;
if (base32 == 0xc0000000) {
kernel_size = load_elf(kernel_filename, -0x30000000LL,
&entry, NULL, NULL,
1, ELF_MACHINE, 0);
}
/* Always boot into physical ram. */
bootstrap_pc = ddr_base + (entry & 0x0fffffff);
if (kernel_size < 0) {
/* If we failed loading ELF's try a raw image. */
kernel_size = load_image_targphys(kernel_filename, ddr_base,
ram_size);
bootstrap_pc = ddr_base;
}
env->regs[5] = ddr_base + kernel_size + 8192;
if (kernel_cmdline && (kcmdline_len = strlen(kernel_cmdline))) {
pstrcpy_targphys("cmdline", env->regs[5], 256, kernel_cmdline);
}
env->regs[6] = 0;
/* Provide a device-tree. */
env->regs[7] = ddr_base + kernel_size + 256;
petalogix_load_device_tree(env->regs[7], ram_size,
env->regs[6], 0,
kernel_cmdline);
}
env->sregs[SR_PC] = bootstrap_pc;
}
static void realview_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model,
enum realview_board_type board_type)
{
ARMCPU *cpu = NULL;
CPUARMState *env;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *ram_lo = g_new(MemoryRegion, 1);
MemoryRegion *ram_hi = g_new(MemoryRegion, 1);
MemoryRegion *ram_alias = g_new(MemoryRegion, 1);
MemoryRegion *ram_hack = g_new(MemoryRegion, 1);
DeviceState *dev, *sysctl, *gpio2, *pl041;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[64];
qemu_irq mmc_irq[2];
PCIBus *pci_bus;
NICInfo *nd;
i2c_bus *i2c;
int n;
int done_nic = 0;
qemu_irq cpu_irq[4];
int is_mpcore = 0;
int is_pb = 0;
uint32_t proc_id = 0;
uint32_t sys_id;
ram_addr_t low_ram_size;
switch (board_type) {
case BOARD_EB:
break;
case BOARD_EB_MPCORE:
is_mpcore = 1;
break;
case BOARD_PB_A8:
is_pb = 1;
break;
case BOARD_PBX_A9:
is_mpcore = 1;
is_pb = 1;
break;
}
for (n = 0; n < smp_cpus; n++) {
cpu = cpu_arm_init(cpu_model);
if (!cpu) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(cpu);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
}
env = &cpu->env;
if (arm_feature(env, ARM_FEATURE_V7)) {
if (is_mpcore) {
proc_id = 0x0c000000;
} else {
proc_id = 0x0e000000;
}
} else if (arm_feature(env, ARM_FEATURE_V6K)) {
proc_id = 0x06000000;
} else if (arm_feature(env, ARM_FEATURE_V6)) {
proc_id = 0x04000000;
} else {
proc_id = 0x02000000;
}
if (is_pb && ram_size > 0x20000000) {
/* Core tile RAM. */
low_ram_size = ram_size - 0x20000000;
ram_size = 0x20000000;
memory_region_init_ram(ram_lo, "realview.lowmem", low_ram_size);
vmstate_register_ram_global(ram_lo);
memory_region_add_subregion(sysmem, 0x20000000, ram_lo);
}
memory_region_init_ram(ram_hi, "realview.highmem", ram_size);
vmstate_register_ram_global(ram_hi);
low_ram_size = ram_size;
if (low_ram_size > 0x10000000)
low_ram_size = 0x10000000;
/* SDRAM at address zero. */
memory_region_init_alias(ram_alias, "realview.alias",
ram_hi, 0, low_ram_size);
memory_region_add_subregion(sysmem, 0, ram_alias);
if (is_pb) {
/* And again at a high address. */
memory_region_add_subregion(sysmem, 0x70000000, ram_hi);
} else {
ram_size = low_ram_size;
}
sys_id = is_pb ? 0x01780500 : 0xc1400400;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
qdev_init_nofail(sysctl);
sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
if (is_mpcore) {
target_phys_addr_t periphbase;
dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
if (is_pb) {
periphbase = 0x1f000000;
} else {
periphbase = 0x10100000;
}
sysbus_mmio_map(busdev, 0, periphbase);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
sysbus_create_varargs("l2x0", periphbase + 0x2000, NULL);
/* Both A9 and 11MPCore put the GIC CPU i/f at base + 0x100 */
realview_binfo.gic_cpu_if_addr = periphbase + 0x100;
} else {
uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
/* For now just create the nIRQ GIC, and ignore the others. */
dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(sysbus_from_qdev(pl041), 0, 0x10004000);
sysbus_connect_irq(sysbus_from_qdev(pl041), 0, pic[19]);
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
sysbus_create_simple("pl011", 0x10009000, pic[12]);
sysbus_create_simple("pl011", 0x1000a000, pic[13]);
sysbus_create_simple("pl011", 0x1000b000, pic[14]);
sysbus_create_simple("pl011", 0x1000c000, pic[15]);
/* DMA controller is optional, apparently. */
sysbus_create_simple("pl081", 0x10030000, pic[24]);
sysbus_create_simple("sp804", 0x10011000, pic[4]);
sysbus_create_simple("sp804", 0x10012000, pic[5]);
sysbus_create_simple("pl061", 0x10013000, pic[6]);
sysbus_create_simple("pl061", 0x10014000, pic[7]);
gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);
sysbus_create_simple("pl111", 0x10020000, pic[23]);
dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
/* Wire up MMC card detect and read-only signals. These have
* to go to both the PL061 GPIO and the sysctl register.
* Note that the PL181 orders these lines (readonly,inserted)
* and the PL061 has them the other way about. Also the card
* detect line is inverted.
*/
mmc_irq[0] = qemu_irq_split(
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),
qdev_get_gpio_in(gpio2, 1));
mmc_irq[1] = qemu_irq_split(
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),
qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));
qdev_connect_gpio_out(dev, 0, mmc_irq[0]);
qdev_connect_gpio_out(dev, 1, mmc_irq[1]);
sysbus_create_simple("pl031", 0x10017000, pic[10]);
if (!is_pb) {
dev = qdev_create(NULL, "realview_pci");
busdev = sysbus_from_qdev(dev);
qdev_init_nofail(dev);
sysbus_mmio_map(busdev, 0, 0x61000000); /* PCI self-config */
sysbus_mmio_map(busdev, 1, 0x62000000); /* PCI config */
sysbus_mmio_map(busdev, 2, 0x63000000); /* PCI I/O */
sysbus_connect_irq(busdev, 0, pic[48]);
sysbus_connect_irq(busdev, 1, pic[49]);
sysbus_connect_irq(busdev, 2, pic[50]);
sysbus_connect_irq(busdev, 3, pic[51]);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
if (usb_enabled) {
pci_create_simple(pci_bus, -1, "pci-ohci");
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
n--;
}
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (!done_nic && (!nd->model ||
strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {
if (is_pb) {
lan9118_init(nd, 0x4e000000, pic[28]);
} else {
smc91c111_init(nd, 0x4e000000, pic[28]);
}
done_nic = 1;
} else {
pci_nic_init_nofail(nd, "rtl8139", NULL);
}
}
dev = sysbus_create_simple("versatile_i2c", 0x10002000, NULL);
i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
i2c_create_slave(i2c, "ds1338", 0x68);
/* Memory map for RealView Emulation Baseboard: */
/* 0x10000000 System registers. */
/* 0x10001000 System controller. */
/* 0x10002000 Two-Wire Serial Bus. */
/* 0x10003000 Reserved. */
/* 0x10004000 AACI. */
/* 0x10005000 MCI. */
/* 0x10006000 KMI0. */
/* 0x10007000 KMI1. */
/* 0x10008000 Character LCD. (EB) */
/* 0x10009000 UART0. */
/* 0x1000a000 UART1. */
/* 0x1000b000 UART2. */
/* 0x1000c000 UART3. */
/* 0x1000d000 SSPI. */
/* 0x1000e000 SCI. */
/* 0x1000f000 Reserved. */
/* 0x10010000 Watchdog. */
/* 0x10011000 Timer 0+1. */
/* 0x10012000 Timer 2+3. */
/* 0x10013000 GPIO 0. */
/* 0x10014000 GPIO 1. */
/* 0x10015000 GPIO 2. */
/* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */
/* 0x10017000 RTC. */
/* 0x10018000 DMC. */
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
/* 0x10040000 GIC1. (EB) */
/* 0x10050000 GIC2. (EB) */
/* 0x10060000 GIC3. (EB) */
/* 0x10070000 GIC4. (EB) */
/* 0x10080000 SMC. */
/* 0x1e000000 GIC1. (PB) */
/* 0x1e001000 GIC2. (PB) */
/* 0x1e002000 GIC3. (PB) */
/* 0x1e003000 GIC4. (PB) */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x48000000 SRAM. */
/* 0x4c000000 Configuration flash. */
/* 0x4e000000 Ethernet. */
/* 0x4f000000 USB. */
/* 0x50000000 PISMO. */
/* 0x54000000 PISMO. */
/* 0x58000000 PISMO. */
/* 0x5c000000 PISMO. */
/* 0x60000000 PCI. */
/* 0x61000000 PCI Self Config. */
/* 0x62000000 PCI Config. */
/* 0x63000000 PCI IO. */
/* 0x64000000 PCI mem 0. */
/* 0x68000000 PCI mem 1. */
/* 0x6c000000 PCI mem 2. */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
memory_region_init_ram(ram_hack, "realview.hack", 0x1000);
vmstate_register_ram_global(ram_hack);
memory_region_add_subregion(sysmem, SMP_BOOT_ADDR, ram_hack);
realview_binfo.ram_size = ram_size;
realview_binfo.kernel_filename = kernel_filename;
realview_binfo.kernel_cmdline = kernel_cmdline;
realview_binfo.initrd_filename = initrd_filename;
realview_binfo.nb_cpus = smp_cpus;
realview_binfo.board_id = realview_board_id[board_type];
realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
arm_load_kernel(arm_env_get_cpu(first_cpu), &realview_binfo);
}
static void vexpress_common_init(VEDBoardInfo *daughterboard,
QEMUMachineInitArgs *args)
{
DeviceState *dev, *sysctl, *pl041;
qemu_irq pic[64];
uint32_t sys_id;
DriveInfo *dinfo;
pflash_t *pflash0;
ram_addr_t vram_size, sram_size;
MemoryRegion *sysmem = get_system_memory();
MemoryRegion *vram = g_new(MemoryRegion, 1);
MemoryRegion *sram = g_new(MemoryRegion, 1);
MemoryRegion *flashalias = g_new(MemoryRegion, 1);
MemoryRegion *flash0mem;
const hwaddr *map = daughterboard->motherboard_map;
int i;
daughterboard->init(daughterboard, args->ram_size, args->cpu_model, pic);
/* Motherboard peripherals: the wiring is the same but the
* addresses vary between the legacy and A-Series memory maps.
*/
sys_id = 0x1190f500;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_prop_set_uint32(sysctl, "proc_id", daughterboard->proc_id);
qdev_prop_set_uint32(sysctl, "len-db-voltage",
daughterboard->num_voltage_sensors);
for (i = 0; i < daughterboard->num_voltage_sensors; i++) {
char *propname = g_strdup_printf("db-voltage[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->voltages[i]);
g_free(propname);
}
qdev_prop_set_uint32(sysctl, "len-db-clock",
daughterboard->num_clocks);
for (i = 0; i < daughterboard->num_clocks; i++) {
char *propname = g_strdup_printf("db-clock[%d]", i);
qdev_prop_set_uint32(sysctl, propname, daughterboard->clocks[i]);
g_free(propname);
}
qdev_init_nofail(sysctl);
sysbus_mmio_map(SYS_BUS_DEVICE(sysctl), 0, map[VE_SYSREGS]);
/* VE_SP810: not modelled */
/* VE_SERIALPCI: not modelled */
pl041 = qdev_create(NULL, "pl041");
qdev_prop_set_uint32(pl041, "nc_fifo_depth", 512);
qdev_init_nofail(pl041);
sysbus_mmio_map(SYS_BUS_DEVICE(pl041), 0, map[VE_PL041]);
sysbus_connect_irq(SYS_BUS_DEVICE(pl041), 0, pic[11]);
dev = sysbus_create_varargs("pl181", map[VE_MMCI], pic[9], pic[10], NULL);
/* Wire up MMC card detect and read-only signals */
qdev_connect_gpio_out(dev, 0,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT));
qdev_connect_gpio_out(dev, 1,
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN));
sysbus_create_simple("pl050_keyboard", map[VE_KMI0], pic[12]);
sysbus_create_simple("pl050_mouse", map[VE_KMI1], pic[13]);
sysbus_create_simple("pl011", map[VE_UART0], pic[5]);
sysbus_create_simple("pl011", map[VE_UART1], pic[6]);
sysbus_create_simple("pl011", map[VE_UART2], pic[7]);
sysbus_create_simple("pl011", map[VE_UART3], pic[8]);
sysbus_create_simple("sp804", map[VE_TIMER01], pic[2]);
sysbus_create_simple("sp804", map[VE_TIMER23], pic[3]);
/* VE_SERIALDVI: not modelled */
sysbus_create_simple("pl031", map[VE_RTC], pic[4]); /* RTC */
/* VE_COMPACTFLASH: not modelled */
sysbus_create_simple("pl111", map[VE_CLCD], pic[14]);
dinfo = drive_get_next(IF_PFLASH);
pflash0 = pflash_cfi01_register(map[VE_NORFLASH0], NULL, "vexpress.flash0",
VEXPRESS_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
VEXPRESS_FLASH_SECT_SIZE,
VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE, 4,
0x00, 0x89, 0x00, 0x18, 0);
if (!pflash0) {
fprintf(stderr, "vexpress: error registering flash 0.\n");
exit(1);
}
if (map[VE_NORFLASHALIAS] != -1) {
/* Map flash 0 as an alias into low memory */
flash0mem = sysbus_mmio_get_region(SYS_BUS_DEVICE(pflash0), 0);
memory_region_init_alias(flashalias, NULL, "vexpress.flashalias",
flash0mem, 0, VEXPRESS_FLASH_SIZE);
memory_region_add_subregion(sysmem, map[VE_NORFLASHALIAS], flashalias);
}
dinfo = drive_get_next(IF_PFLASH);
if (!pflash_cfi01_register(map[VE_NORFLASH1], NULL, "vexpress.flash1",
VEXPRESS_FLASH_SIZE, dinfo ? dinfo->bdrv : NULL,
VEXPRESS_FLASH_SECT_SIZE,
VEXPRESS_FLASH_SIZE / VEXPRESS_FLASH_SECT_SIZE, 4,
0x00, 0x89, 0x00, 0x18, 0)) {
fprintf(stderr, "vexpress: error registering flash 1.\n");
exit(1);
}
sram_size = 0x2000000;
memory_region_init_ram(sram, NULL, "vexpress.sram", sram_size);
vmstate_register_ram_global(sram);
memory_region_add_subregion(sysmem, map[VE_SRAM], sram);
vram_size = 0x800000;
memory_region_init_ram(vram, NULL, "vexpress.vram", vram_size);
vmstate_register_ram_global(vram);
memory_region_add_subregion(sysmem, map[VE_VIDEORAM], vram);
/* 0x4e000000 LAN9118 Ethernet */
if (nd_table[0].used) {
lan9118_init(&nd_table[0], map[VE_ETHERNET], pic[15]);
}
/* VE_USB: not modelled */
/* VE_DAPROM: not modelled */
/* Create mmio transports, so the user can create virtio backends
* (which will be automatically plugged in to the transports). If
* no backend is created the transport will just sit harmlessly idle.
*/
for (i = 0; i < NUM_VIRTIO_TRANSPORTS; i++) {
sysbus_create_simple("virtio-mmio", map[VE_VIRTIO] + 0x200 * i,
pic[40 + i]);
}
daughterboard->bootinfo.ram_size = args->ram_size;
daughterboard->bootinfo.kernel_filename = args->kernel_filename;
daughterboard->bootinfo.kernel_cmdline = args->kernel_cmdline;
daughterboard->bootinfo.initrd_filename = args->initrd_filename;
daughterboard->bootinfo.nb_cpus = smp_cpus;
daughterboard->bootinfo.board_id = VEXPRESS_BOARD_ID;
daughterboard->bootinfo.loader_start = daughterboard->loader_start;
daughterboard->bootinfo.smp_loader_start = map[VE_SRAM];
daughterboard->bootinfo.smp_bootreg_addr = map[VE_SYSREGS] + 0x30;
daughterboard->bootinfo.gic_cpu_if_addr = daughterboard->gic_cpu_if_addr;
daughterboard->bootinfo.modify_dtb = vexpress_modify_dtb;
arm_load_kernel(ARM_CPU(first_cpu), &daughterboard->bootinfo);
}
Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
unsigned long ram_size)
{
int i, n;
Exynos4210State *s = g_new(Exynos4210State, 1);
qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
unsigned long mem_size;
DeviceState *dev;
SysBusDevice *busdev;
ObjectClass *cpu_oc;
cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, "cortex-a9");
assert(cpu_oc);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
Object *cpuobj = object_new(object_class_get_name(cpu_oc));
Error *err = NULL;
/* By default A9 CPUs have EL3 enabled. This board does not currently
* support EL3 so the CPU EL3 property is disabled before realization.
*/
if (object_property_find(cpuobj, "has_el3", NULL)) {
object_property_set_bool(cpuobj, false, "has_el3", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
}
s->cpu[n] = ARM_CPU(cpuobj);
object_property_set_int(cpuobj, EXYNOS4210_SMP_PRIVATE_BASE_ADDR,
"reset-cbar", &error_abort);
object_property_set_bool(cpuobj, true, "realized", &err);
if (err) {
error_report("%s", error_get_pretty(err));
exit(1);
}
}
/*** IRQs ***/
s->irq_table = exynos4210_init_irq(&s->irqs);
/* IRQ Gate */
for (i = 0; i < EXYNOS4210_NCPUS; i++) {
dev = qdev_create(NULL, "exynos4210.irq_gate");
qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS);
qdev_init_nofail(dev);
/* Get IRQ Gate input in gate_irq */
for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
gate_irq[i][n] = qdev_get_gpio_in(dev, n);
}
busdev = SYS_BUS_DEVICE(dev);
/* Connect IRQ Gate output to CPU's IRQ line */
sysbus_connect_irq(busdev, 0,
qdev_get_gpio_in(DEVICE(s->cpu[i]), ARM_CPU_IRQ));
}
/* Private memory region and Internal GIC */
dev = qdev_create(NULL, "a9mpcore_priv");
qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
sysbus_connect_irq(busdev, n, gate_irq[n][0]);
}
for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
}
/* Cache controller */
sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL);
/* External GIC */
dev = qdev_create(NULL, "exynos4210.gic");
qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
/* Map CPU interface */
sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR);
/* Map Distributer interface */
sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
sysbus_connect_irq(busdev, n, gate_irq[n][1]);
}
for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
}
/* Internal Interrupt Combiner */
dev = qdev_create(NULL, "exynos4210.combiner");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]);
}
exynos4210_combiner_get_gpioin(&s->irqs, dev, 0);
sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR);
/* External Interrupt Combiner */
dev = qdev_create(NULL, "exynos4210.combiner");
qdev_prop_set_uint32(dev, "external", 1);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]);
}
exynos4210_combiner_get_gpioin(&s->irqs, dev, 1);
sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR);
/* Initialize board IRQs. */
exynos4210_init_board_irqs(&s->irqs);
/*** Memory ***/
/* Chip-ID and OMR */
memory_region_init_io(&s->chipid_mem, NULL, &exynos4210_chipid_and_omr_ops,
NULL, "exynos4210.chipid", sizeof(chipid_and_omr));
memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR,
&s->chipid_mem);
/* Internal ROM */
memory_region_init_ram(&s->irom_mem, NULL, "exynos4210.irom",
EXYNOS4210_IROM_SIZE, &error_abort);
vmstate_register_ram_global(&s->irom_mem);
memory_region_set_readonly(&s->irom_mem, true);
memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR,
&s->irom_mem);
/* mirror of iROM */
memory_region_init_alias(&s->irom_alias_mem, NULL, "exynos4210.irom_alias",
&s->irom_mem,
0,
EXYNOS4210_IROM_SIZE);
memory_region_set_readonly(&s->irom_alias_mem, true);
memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR,
&s->irom_alias_mem);
/* Internal RAM */
memory_region_init_ram(&s->iram_mem, NULL, "exynos4210.iram",
EXYNOS4210_IRAM_SIZE, &error_abort);
vmstate_register_ram_global(&s->iram_mem);
memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR,
&s->iram_mem);
/* DRAM */
mem_size = ram_size;
if (mem_size > EXYNOS4210_DRAM_MAX_SIZE) {
memory_region_init_ram(&s->dram1_mem, NULL, "exynos4210.dram1",
mem_size - EXYNOS4210_DRAM_MAX_SIZE, &error_abort);
vmstate_register_ram_global(&s->dram1_mem);
memory_region_add_subregion(system_mem, EXYNOS4210_DRAM1_BASE_ADDR,
&s->dram1_mem);
mem_size = EXYNOS4210_DRAM_MAX_SIZE;
}
memory_region_init_ram(&s->dram0_mem, NULL, "exynos4210.dram0", mem_size,
&error_abort);
vmstate_register_ram_global(&s->dram0_mem);
memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
&s->dram0_mem);
/* PMU.
* The only reason of existence at the moment is that secondary CPU boot
* loader uses PMU INFORM5 register as a holding pen.
*/
sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);
/* PWM */
sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
s->irq_table[exynos4210_get_irq(22, 0)],
s->irq_table[exynos4210_get_irq(22, 1)],
s->irq_table[exynos4210_get_irq(22, 2)],
s->irq_table[exynos4210_get_irq(22, 3)],
s->irq_table[exynos4210_get_irq(22, 4)],
NULL);
/* RTC */
sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR,
s->irq_table[exynos4210_get_irq(23, 0)],
s->irq_table[exynos4210_get_irq(23, 1)],
NULL);
/* Multi Core Timer */
dev = qdev_create(NULL, "exynos4210.mct");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < 4; n++) {
/* Connect global timer interrupts to Combiner gpio_in */
sysbus_connect_irq(busdev, n,
s->irq_table[exynos4210_get_irq(1, 4 + n)]);
}
/* Connect local timer interrupts to Combiner gpio_in */
sysbus_connect_irq(busdev, 4,
s->irq_table[exynos4210_get_irq(51, 0)]);
sysbus_connect_irq(busdev, 5,
s->irq_table[exynos4210_get_irq(35, 3)]);
sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR);
/*** I2C ***/
for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) {
uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n;
qemu_irq i2c_irq;
if (n < 8) {
i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)];
} else {
i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)];
}
dev = qdev_create(NULL, "exynos4210.i2c");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(busdev, 0, i2c_irq);
sysbus_mmio_map(busdev, 0, addr);
s->i2c_if[n] = (I2CBus *)qdev_get_child_bus(dev, "i2c");
}
/*** UARTs ***/
exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);
exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
EXYNOS4210_UART1_FIFO_SIZE, 1, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);
exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
EXYNOS4210_UART2_FIFO_SIZE, 2, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);
exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
EXYNOS4210_UART3_FIFO_SIZE, 3, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);
/*** Display controller (FIMD) ***/
sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR,
s->irq_table[exynos4210_get_irq(11, 0)],
s->irq_table[exynos4210_get_irq(11, 1)],
s->irq_table[exynos4210_get_irq(11, 2)],
NULL);
sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR,
s->irq_table[exynos4210_get_irq(28, 3)]);
return s;
}
Exynos4210State *exynos4210_init(MemoryRegion *system_mem,
unsigned long ram_size)
{
qemu_irq cpu_irq[EXYNOS4210_NCPUS];
int i, n;
Exynos4210State *s = g_new(Exynos4210State, 1);
qemu_irq *irqp;
qemu_irq gate_irq[EXYNOS4210_NCPUS][EXYNOS4210_IRQ_GATE_NINPUTS];
unsigned long mem_size;
DeviceState *dev;
SysBusDevice *busdev;
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
s->cpu[n] = cpu_arm_init("cortex-a9");
if (!s->cpu[n]) {
fprintf(stderr, "Unable to find CPU %d definition\n", n);
exit(1);
}
/* Create PIC controller for each processor instance */
irqp = arm_pic_init_cpu(s->cpu[n]);
/*
* Get GICs gpio_in cpu_irq to connect a combiner to them later.
* Use only IRQ for a while.
*/
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
}
/*** IRQs ***/
s->irq_table = exynos4210_init_irq(&s->irqs);
/* IRQ Gate */
for (i = 0; i < EXYNOS4210_NCPUS; i++) {
dev = qdev_create(NULL, "exynos4210.irq_gate");
qdev_prop_set_uint32(dev, "n_in", EXYNOS4210_IRQ_GATE_NINPUTS);
qdev_init_nofail(dev);
/* Get IRQ Gate input in gate_irq */
for (n = 0; n < EXYNOS4210_IRQ_GATE_NINPUTS; n++) {
gate_irq[i][n] = qdev_get_gpio_in(dev, n);
}
busdev = SYS_BUS_DEVICE(dev);
/* Connect IRQ Gate output to cpu_irq */
sysbus_connect_irq(busdev, 0, cpu_irq[i]);
}
/* Private memory region and Internal GIC */
dev = qdev_create(NULL, "a9mpcore_priv");
qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, EXYNOS4210_SMP_PRIVATE_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
sysbus_connect_irq(busdev, n, gate_irq[n][0]);
}
for (n = 0; n < EXYNOS4210_INT_GIC_NIRQ; n++) {
s->irqs.int_gic_irq[n] = qdev_get_gpio_in(dev, n);
}
/* Cache controller */
sysbus_create_simple("l2x0", EXYNOS4210_L2X0_BASE_ADDR, NULL);
/* External GIC */
dev = qdev_create(NULL, "exynos4210.gic");
qdev_prop_set_uint32(dev, "num-cpu", EXYNOS4210_NCPUS);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
/* Map CPU interface */
sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_GIC_CPU_BASE_ADDR);
/* Map Distributer interface */
sysbus_mmio_map(busdev, 1, EXYNOS4210_EXT_GIC_DIST_BASE_ADDR);
for (n = 0; n < EXYNOS4210_NCPUS; n++) {
sysbus_connect_irq(busdev, n, gate_irq[n][1]);
}
for (n = 0; n < EXYNOS4210_EXT_GIC_NIRQ; n++) {
s->irqs.ext_gic_irq[n] = qdev_get_gpio_in(dev, n);
}
/* Internal Interrupt Combiner */
dev = qdev_create(NULL, "exynos4210.combiner");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
sysbus_connect_irq(busdev, n, s->irqs.int_gic_irq[n]);
}
exynos4210_combiner_get_gpioin(&s->irqs, dev, 0);
sysbus_mmio_map(busdev, 0, EXYNOS4210_INT_COMBINER_BASE_ADDR);
/* External Interrupt Combiner */
dev = qdev_create(NULL, "exynos4210.combiner");
qdev_prop_set_uint32(dev, "external", 1);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < EXYNOS4210_MAX_INT_COMBINER_OUT_IRQ; n++) {
sysbus_connect_irq(busdev, n, s->irqs.ext_gic_irq[n]);
}
exynos4210_combiner_get_gpioin(&s->irqs, dev, 1);
sysbus_mmio_map(busdev, 0, EXYNOS4210_EXT_COMBINER_BASE_ADDR);
/* Initialize board IRQs. */
exynos4210_init_board_irqs(&s->irqs);
/*** Memory ***/
/* Chip-ID and OMR */
memory_region_init_ram_ptr(&s->chipid_mem, "exynos4210.chipid",
sizeof(chipid_and_omr), chipid_and_omr);
memory_region_set_readonly(&s->chipid_mem, true);
memory_region_add_subregion(system_mem, EXYNOS4210_CHIPID_ADDR,
&s->chipid_mem);
/* Internal ROM */
memory_region_init_ram(&s->irom_mem, "exynos4210.irom",
EXYNOS4210_IROM_SIZE);
memory_region_set_readonly(&s->irom_mem, true);
memory_region_add_subregion(system_mem, EXYNOS4210_IROM_BASE_ADDR,
&s->irom_mem);
/* mirror of iROM */
memory_region_init_alias(&s->irom_alias_mem, "exynos4210.irom_alias",
&s->irom_mem,
0,
EXYNOS4210_IROM_SIZE);
memory_region_set_readonly(&s->irom_alias_mem, true);
memory_region_add_subregion(system_mem, EXYNOS4210_IROM_MIRROR_BASE_ADDR,
&s->irom_alias_mem);
/* Internal RAM */
memory_region_init_ram(&s->iram_mem, "exynos4210.iram",
EXYNOS4210_IRAM_SIZE);
vmstate_register_ram_global(&s->iram_mem);
memory_region_add_subregion(system_mem, EXYNOS4210_IRAM_BASE_ADDR,
&s->iram_mem);
/* DRAM */
mem_size = ram_size;
if (mem_size > EXYNOS4210_DRAM_MAX_SIZE) {
memory_region_init_ram(&s->dram1_mem, "exynos4210.dram1",
mem_size - EXYNOS4210_DRAM_MAX_SIZE);
vmstate_register_ram_global(&s->dram1_mem);
memory_region_add_subregion(system_mem, EXYNOS4210_DRAM1_BASE_ADDR,
&s->dram1_mem);
mem_size = EXYNOS4210_DRAM_MAX_SIZE;
}
memory_region_init_ram(&s->dram0_mem, "exynos4210.dram0", mem_size);
vmstate_register_ram_global(&s->dram0_mem);
memory_region_add_subregion(system_mem, EXYNOS4210_DRAM0_BASE_ADDR,
&s->dram0_mem);
/* PMU.
* The only reason of existence at the moment is that secondary CPU boot
* loader uses PMU INFORM5 register as a holding pen.
*/
sysbus_create_simple("exynos4210.pmu", EXYNOS4210_PMU_BASE_ADDR, NULL);
/* PWM */
sysbus_create_varargs("exynos4210.pwm", EXYNOS4210_PWM_BASE_ADDR,
s->irq_table[exynos4210_get_irq(22, 0)],
s->irq_table[exynos4210_get_irq(22, 1)],
s->irq_table[exynos4210_get_irq(22, 2)],
s->irq_table[exynos4210_get_irq(22, 3)],
s->irq_table[exynos4210_get_irq(22, 4)],
NULL);
/* RTC */
sysbus_create_varargs("exynos4210.rtc", EXYNOS4210_RTC_BASE_ADDR,
s->irq_table[exynos4210_get_irq(23, 0)],
s->irq_table[exynos4210_get_irq(23, 1)],
NULL);
/* Multi Core Timer */
dev = qdev_create(NULL, "exynos4210.mct");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
for (n = 0; n < 4; n++) {
/* Connect global timer interrupts to Combiner gpio_in */
sysbus_connect_irq(busdev, n,
s->irq_table[exynos4210_get_irq(1, 4 + n)]);
}
/* Connect local timer interrupts to Combiner gpio_in */
sysbus_connect_irq(busdev, 4,
s->irq_table[exynos4210_get_irq(51, 0)]);
sysbus_connect_irq(busdev, 5,
s->irq_table[exynos4210_get_irq(35, 3)]);
sysbus_mmio_map(busdev, 0, EXYNOS4210_MCT_BASE_ADDR);
/*** I2C ***/
for (n = 0; n < EXYNOS4210_I2C_NUMBER; n++) {
uint32_t addr = EXYNOS4210_I2C_BASE_ADDR + EXYNOS4210_I2C_SHIFT * n;
qemu_irq i2c_irq;
if (n < 8) {
i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_I2C_INTG, n)];
} else {
i2c_irq = s->irq_table[exynos4210_get_irq(EXYNOS4210_HDMI_INTG, 1)];
}
dev = qdev_create(NULL, "exynos4210.i2c");
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_connect_irq(busdev, 0, i2c_irq);
sysbus_mmio_map(busdev, 0, addr);
s->i2c_if[n] = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
}
/*** UARTs ***/
exynos4210_uart_create(EXYNOS4210_UART0_BASE_ADDR,
EXYNOS4210_UART0_FIFO_SIZE, 0, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 0)]);
exynos4210_uart_create(EXYNOS4210_UART1_BASE_ADDR,
EXYNOS4210_UART1_FIFO_SIZE, 1, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 1)]);
exynos4210_uart_create(EXYNOS4210_UART2_BASE_ADDR,
EXYNOS4210_UART2_FIFO_SIZE, 2, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 2)]);
exynos4210_uart_create(EXYNOS4210_UART3_BASE_ADDR,
EXYNOS4210_UART3_FIFO_SIZE, 3, NULL,
s->irq_table[exynos4210_get_irq(EXYNOS4210_UART_INT_GRP, 3)]);
/*** Display controller (FIMD) ***/
sysbus_create_varargs("exynos4210.fimd", EXYNOS4210_FIMD0_BASE_ADDR,
s->irq_table[exynos4210_get_irq(11, 0)],
s->irq_table[exynos4210_get_irq(11, 1)],
s->irq_table[exynos4210_get_irq(11, 2)],
NULL);
sysbus_create_simple(TYPE_EXYNOS4210_EHCI, EXYNOS4210_EHCI_BASE_ADDR,
s->irq_table[exynos4210_get_irq(28, 3)]);
return s;
}
static void zynq_init(MachineState *machine)
{
ram_addr_t ram_size = machine->ram_size;
const char *cpu_model = machine->cpu_model;
const char *kernel_filename = machine->kernel_filename;
const char *kernel_cmdline = machine->kernel_cmdline;
const char *initrd_filename = machine->initrd_filename;
ObjectClass *cpu_oc;
ARMCPU *cpu;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ext_ram = g_new(MemoryRegion, 1);
MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
DeviceState *dev;
SysBusDevice *busdev;
qemu_irq pic[64];
Error *err = NULL;
int n;
if (!cpu_model) {
cpu_model = "cortex-a9";
}
cpu_oc = cpu_class_by_name(TYPE_ARM_CPU, cpu_model);
cpu = ARM_CPU(object_new(object_class_get_name(cpu_oc)));
/* By default A9 CPUs have EL3 enabled. This board does not
* currently support EL3 so the CPU EL3 property is disabled before
* realization.
*/
if (object_property_find(OBJECT(cpu), "has_el3", NULL)) {
object_property_set_bool(OBJECT(cpu), false, "has_el3", &err);
if (err) {
error_report_err(err);
exit(1);
}
}
object_property_set_int(OBJECT(cpu), ZYNQ_BOARD_MIDR, "midr", &err);
if (err) {
error_report_err(err);
exit(1);
}
object_property_set_int(OBJECT(cpu), MPCORE_PERIPHBASE, "reset-cbar", &err);
if (err) {
error_report_err(err);
exit(1);
}
object_property_set_bool(OBJECT(cpu), true, "realized", &err);
if (err) {
error_report_err(err);
exit(1);
}
/* max 2GB ram */
if (ram_size > 0x80000000) {
ram_size = 0x80000000;
}
/* DDR remapped to address zero. */
memory_region_allocate_system_memory(ext_ram, NULL, "zynq.ext_ram",
ram_size);
memory_region_add_subregion(address_space_mem, 0, ext_ram);
/* 256K of on-chip memory */
memory_region_init_ram(ocm_ram, NULL, "zynq.ocm_ram", 256 << 10,
&error_fatal);
vmstate_register_ram_global(ocm_ram);
memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram);
DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0);
/* AMD */
pflash_cfi02_register(0xe2000000, NULL, "zynq.pflash", FLASH_SIZE,
dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
FLASH_SECTOR_SIZE,
FLASH_SIZE/FLASH_SECTOR_SIZE, 1,
1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa,
0);
dev = qdev_create(NULL, "xilinx,zynq_slcr");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8000000);
dev = qdev_create(NULL, "a9mpcore_priv");
qdev_prop_set_uint32(dev, "num-cpu", 1);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, MPCORE_PERIPHBASE);
sysbus_connect_irq(busdev, 0,
qdev_get_gpio_in(DEVICE(cpu), ARM_CPU_IRQ));
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
zynq_init_spi_flashes(0xE0006000, pic[58-IRQ_OFFSET], false);
zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET], false);
zynq_init_spi_flashes(0xE000D000, pic[51-IRQ_OFFSET], true);
sysbus_create_simple("xlnx,ps7-usb", 0xE0002000, pic[53-IRQ_OFFSET]);
sysbus_create_simple("xlnx,ps7-usb", 0xE0003000, pic[76-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0000000, pic[59-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0001000, pic[82-IRQ_OFFSET]);
sysbus_create_varargs("cadence_ttc", 0xF8001000,
pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);
sysbus_create_varargs("cadence_ttc", 0xF8002000,
pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL);
gem_init(&nd_table[0], 0xE000B000, pic[54-IRQ_OFFSET]);
gem_init(&nd_table[1], 0xE000C000, pic[77-IRQ_OFFSET]);
dev = qdev_create(NULL, "generic-sdhci");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0100000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[56-IRQ_OFFSET]);
dev = qdev_create(NULL, "generic-sdhci");
qdev_init_nofail(dev);
sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0101000);
sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[79-IRQ_OFFSET]);
dev = qdev_create(NULL, "pl330");
qdev_prop_set_uint8(dev, "num_chnls", 8);
qdev_prop_set_uint8(dev, "num_periph_req", 4);
qdev_prop_set_uint8(dev, "num_events", 16);
qdev_prop_set_uint8(dev, "data_width", 64);
qdev_prop_set_uint8(dev, "wr_cap", 8);
qdev_prop_set_uint8(dev, "wr_q_dep", 16);
qdev_prop_set_uint8(dev, "rd_cap", 8);
qdev_prop_set_uint8(dev, "rd_q_dep", 16);
qdev_prop_set_uint16(dev, "data_buffer_dep", 256);
qdev_init_nofail(dev);
busdev = SYS_BUS_DEVICE(dev);
sysbus_mmio_map(busdev, 0, 0xF8003000);
sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */
for (n = 0; n < 8; ++n) { /* event irqs */
sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
}
zynq_binfo.ram_size = ram_size;
zynq_binfo.kernel_filename = kernel_filename;
zynq_binfo.kernel_cmdline = kernel_cmdline;
zynq_binfo.initrd_filename = initrd_filename;
zynq_binfo.nb_cpus = 1;
zynq_binfo.board_id = 0xd32;
zynq_binfo.loader_start = 0;
zynq_binfo.board_setup_addr = BOARD_SETUP_ADDR;
zynq_binfo.write_board_setup = zynq_write_board_setup;
arm_load_kernel(ARM_CPU(first_cpu), &zynq_binfo);
}
static void mpc8544ds_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ram = g_new(MemoryRegion, 1);
PCIBus *pci_bus;
CPUPPCState *env = NULL;
uint64_t elf_entry;
uint64_t elf_lowaddr;
target_phys_addr_t entry=0;
target_phys_addr_t loadaddr=UIMAGE_LOAD_BASE;
target_long kernel_size=0;
target_ulong dt_base = 0;
target_ulong initrd_base = 0;
target_long initrd_size=0;
int i=0;
unsigned int pci_irq_nrs[4] = {1, 2, 3, 4};
qemu_irq **irqs, *mpic;
DeviceState *dev;
CPUPPCState *firstenv = NULL;
/* Setup CPUs */
if (cpu_model == NULL) {
cpu_model = "e500v2_v30";
}
irqs = g_malloc0(smp_cpus * sizeof(qemu_irq *));
irqs[0] = g_malloc0(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
for (i = 0; i < smp_cpus; i++) {
PowerPCCPU *cpu;
qemu_irq *input;
cpu = cpu_ppc_init(cpu_model);
if (cpu == NULL) {
fprintf(stderr, "Unable to initialize CPU!\n");
exit(1);
}
env = &cpu->env;
if (!firstenv) {
firstenv = env;
}
irqs[i] = irqs[0] + (i * OPENPIC_OUTPUT_NB);
input = (qemu_irq *)env->irq_inputs;
irqs[i][OPENPIC_OUTPUT_INT] = input[PPCE500_INPUT_INT];
irqs[i][OPENPIC_OUTPUT_CINT] = input[PPCE500_INPUT_CINT];
env->spr[SPR_BOOKE_PIR] = env->cpu_index = i;
ppc_booke_timers_init(env, 400000000, PPC_TIMER_E500);
/* Register reset handler */
if (!i) {
/* Primary CPU */
struct boot_info *boot_info;
boot_info = g_malloc0(sizeof(struct boot_info));
qemu_register_reset(mpc8544ds_cpu_reset, cpu);
env->load_info = boot_info;
} else {
/* Secondary CPUs */
qemu_register_reset(mpc8544ds_cpu_reset_sec, cpu);
}
}
env = firstenv;
/* Fixup Memory size on a alignment boundary */
ram_size &= ~(RAM_SIZES_ALIGN - 1);
/* Register Memory */
memory_region_init_ram(ram, "mpc8544ds.ram", ram_size);
vmstate_register_ram_global(ram);
memory_region_add_subregion(address_space_mem, 0, ram);
/* MPIC */
mpic = mpic_init(address_space_mem, MPC8544_MPIC_REGS_BASE,
smp_cpus, irqs, NULL);
if (!mpic) {
cpu_abort(env, "MPIC failed to initialize\n");
}
/* Serial */
if (serial_hds[0]) {
serial_mm_init(address_space_mem, MPC8544_SERIAL0_REGS_BASE,
0, mpic[12+26], 399193,
serial_hds[0], DEVICE_BIG_ENDIAN);
}
if (serial_hds[1]) {
serial_mm_init(address_space_mem, MPC8544_SERIAL1_REGS_BASE,
0, mpic[12+26], 399193,
serial_hds[0], DEVICE_BIG_ENDIAN);
}
/* General Utility device */
sysbus_create_simple("mpc8544-guts", MPC8544_UTIL_BASE, NULL);
/* PCI */
dev = sysbus_create_varargs("e500-pcihost", MPC8544_PCI_REGS_BASE,
mpic[pci_irq_nrs[0]], mpic[pci_irq_nrs[1]],
mpic[pci_irq_nrs[2]], mpic[pci_irq_nrs[3]],
NULL);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0");
if (!pci_bus)
printf("couldn't create PCI controller!\n");
isa_mmio_init(MPC8544_PCI_IO, MPC8544_PCI_IOLEN);
if (pci_bus) {
/* Register network interfaces. */
for (i = 0; i < nb_nics; i++) {
pci_nic_init_nofail(&nd_table[i], "virtio", NULL);
}
}
/* Register spinning region */
sysbus_create_simple("e500-spin", MPC8544_SPIN_BASE, NULL);
/* Load kernel. */
if (kernel_filename) {
kernel_size = load_uimage(kernel_filename, &entry, &loadaddr, NULL);
if (kernel_size < 0) {
kernel_size = load_elf(kernel_filename, NULL, NULL, &elf_entry,
&elf_lowaddr, NULL, 1, ELF_MACHINE, 0);
entry = elf_entry;
loadaddr = elf_lowaddr;
}
/* XXX try again as binary */
if (kernel_size < 0) {
fprintf(stderr, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
}
/* Load initrd. */
if (initrd_filename) {
initrd_base = (kernel_size + INITRD_LOAD_PAD) & ~INITRD_PAD_MASK;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
}
/* If we're loading a kernel directly, we must load the device tree too. */
if (kernel_filename) {
struct boot_info *boot_info;
#ifndef CONFIG_FDT
cpu_abort(env, "Compiled without FDT support - can't load kernel\n");
#endif
dt_base = (kernel_size + DTC_LOAD_PAD) & ~DTC_PAD_MASK;
if (mpc8544_load_device_tree(env, dt_base, ram_size,
initrd_base, initrd_size, kernel_cmdline) < 0) {
fprintf(stderr, "couldn't load device tree\n");
exit(1);
}
boot_info = env->load_info;
boot_info->entry = entry;
boot_info->dt_base = dt_base;
}
if (kvm_enabled()) {
kvmppc_init();
}
}
static void zynq_init(QEMUMachineInitArgs *args)
{
ram_addr_t ram_size = args->ram_size;
const char *cpu_model = args->cpu_model;
const char *kernel_filename = args->kernel_filename;
const char *kernel_cmdline = args->kernel_cmdline;
const char *initrd_filename = args->initrd_filename;
ARMCPU *cpu;
MemoryRegion *address_space_mem = get_system_memory();
MemoryRegion *ext_ram = g_new(MemoryRegion, 1);
MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
DeviceState *dev;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[64];
NICInfo *nd;
int n;
qemu_irq cpu_irq;
if (!cpu_model) {
cpu_model = "cortex-a9";
}
cpu = cpu_arm_init(cpu_model);
if (!cpu) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(cpu);
cpu_irq = irqp[ARM_PIC_CPU_IRQ];
/* max 2GB ram */
if (ram_size > 0x80000000) {
ram_size = 0x80000000;
}
/* DDR remapped to address zero. */
memory_region_init_ram(ext_ram, "zynq.ext_ram", ram_size);
vmstate_register_ram_global(ext_ram);
memory_region_add_subregion(address_space_mem, 0, ext_ram);
/* 256K of on-chip memory */
memory_region_init_ram(ocm_ram, "zynq.ocm_ram", 256 << 10);
vmstate_register_ram_global(ocm_ram);
memory_region_add_subregion(address_space_mem, 0xFFFC0000, ocm_ram);
DriveInfo *dinfo = drive_get(IF_PFLASH, 0, 0);
/* AMD */
pflash_cfi02_register(0xe2000000, NULL, "zynq.pflash", FLASH_SIZE,
dinfo ? dinfo->bdrv : NULL, FLASH_SECTOR_SIZE,
FLASH_SIZE/FLASH_SECTOR_SIZE, 1,
1, 0x0066, 0x0022, 0x0000, 0x0000, 0x0555, 0x2aa,
0);
dev = qdev_create(NULL, "xilinx,zynq_slcr");
qdev_init_nofail(dev);
sysbus_mmio_map(sysbus_from_qdev(dev), 0, 0xF8000000);
dev = qdev_create(NULL, "a9mpcore_priv");
qdev_prop_set_uint32(dev, "num-cpu", 1);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
sysbus_mmio_map(busdev, 0, 0xF8F00000);
sysbus_connect_irq(busdev, 0, cpu_irq);
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
zynq_init_spi_flashes(0xE0006000, pic[58-IRQ_OFFSET]);
zynq_init_spi_flashes(0xE0007000, pic[81-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0000000, pic[59-IRQ_OFFSET]);
sysbus_create_simple("cadence_uart", 0xE0001000, pic[82-IRQ_OFFSET]);
sysbus_create_varargs("cadence_ttc", 0xF8001000,
pic[42-IRQ_OFFSET], pic[43-IRQ_OFFSET], pic[44-IRQ_OFFSET], NULL);
sysbus_create_varargs("cadence_ttc", 0xF8002000,
pic[69-IRQ_OFFSET], pic[70-IRQ_OFFSET], pic[71-IRQ_OFFSET], NULL);
for (n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (n == 0) {
gem_init(nd, 0xE000B000, pic[54-IRQ_OFFSET]);
} else if (n == 1) {
gem_init(nd, 0xE000C000, pic[77-IRQ_OFFSET]);
}
}
zynq_binfo.ram_size = ram_size;
zynq_binfo.kernel_filename = kernel_filename;
zynq_binfo.kernel_cmdline = kernel_cmdline;
zynq_binfo.initrd_filename = initrd_filename;
zynq_binfo.nb_cpus = 1;
zynq_binfo.board_id = 0xd32;
zynq_binfo.loader_start = 0;
arm_load_kernel(arm_env_get_cpu(first_cpu), &zynq_binfo);
}
