static int tegra_ehci_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
u16 wValue,
u16 wIndex,
char *buf,
u16 wLength
)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int ports = HCS_N_PORTS(ehci->hcs_params);
u32 temp, status, cmd_run;
u32 __iomem *status_reg;
u32 usbsts_reg;
unsigned long flags;
int retval = 0;
unsigned selector;
struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
bool hsic = false;
mutex_lock(&tegra->tegra_ehci_hcd_mutex);
if (!tegra->host_resumed) {
if (buf)
memset (buf, 0, wLength);
mutex_unlock(&tegra->tegra_ehci_hcd_mutex);
return retval;
}
hsic = (tegra->phy->usb_phy_type == TEGRA_USB_PHY_TYPE_HSIC);
status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
spin_lock_irqsave(&ehci->lock, flags);
/*
* In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits
* that are write on clear, by writing back the register read value, so
* USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits
*/
if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) {
temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
ehci_writel(ehci, temp & ~PORT_PE, status_reg);
goto done;
} else if (typeReq == GetPortStatus) {
temp = ehci_readl(ehci, status_reg);
/* check port is in resume state */
if (tegra->port_resuming) {
int delay = ehci->reset_done[wIndex-1] - jiffies;
/* Sometimes it seems we get called too soon... In that case, wait.*/
if (delay > 0) {
ehci_dbg(ehci, "GetPortStatus called too soon, waiting %dms...\n", delay);
mdelay(jiffies_to_msecs(delay));
}
/* Ensure the port PORT_SUSPEND and PORT_RESUME has cleared */
if (handshake(ehci, status_reg, (PORT_SUSPEND | PORT_RESUME), 0, 25000)) {
pr_err("%s: timeout waiting for SUSPEND to clear\n", __func__);
}
tegra->port_resuming = 0;
tegra_usb_phy_postresume(tegra->phy, false);
if (tegra->phy->usb_phy_type == TEGRA_USB_PHY_TYPE_UTMIP) {
ehci->command |= CMD_RUN;
cmd_run = ehci_readl(ehci, &ehci->regs->command);
cmd_run |= CMD_RUN;
/*
* ehci run bit is disabled to avoid SOF.
* 2LS WAR is executed by now enable the run bit.
*/
ehci_writel(ehci, cmd_run, &ehci->regs->command);
/* Now we can safely re-enable irqs */
ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
}
}
} else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
temp = ehci_readl(ehci, status_reg);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
retval = -EPIPE;
goto done;
}
temp &= ~PORT_WKCONN_E;
temp |= PORT_WKDISC_E | PORT_WKOC_E;
ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
/* Need a 4ms delay before the controller goes to suspend */
mdelay(4);
/*
* If a transaction is in progress, there may be a delay in
* suspending the port. Poll until the port is suspended.
*/
if (handshake(ehci, status_reg, PORT_SUSPEND,
PORT_SUSPEND, 5000))
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
/*
* If RUN bit is disabled interrupt is not generated after suspend.
* This change on T20 will allow ASE interrupt generated after suspend
* which will unlink the qheads.
*/
#ifndef CONFIG_ARCH_TEGRA_2x_SOC
if (tegra->phy->usb_phy_type == TEGRA_USB_PHY_TYPE_UTMIP) {
/* Disable RUN bit. */
ehci->command &= ~CMD_RUN;
cmd_run = ehci_readl(ehci, &ehci->regs->command);
cmd_run &= ~CMD_RUN;
ehci_writel(ehci, cmd_run, &ehci->regs->command);
if (handshake (ehci, &ehci->regs->status,
STS_HALT, STS_HALT, 16 * 125))
pr_err("%s() timeout waiting for STS_HALT\n", __func__);
}
#endif
tegra_usb_phy_postsuspend(tegra->phy, false);
goto done;
}
/*
* Tegra host controller will time the resume operation to clear the bit
* when the port control state switches to HS or FS Idle. This behavior
* is different from EHCI where the host controller driver is required
* to set this bit to a zero after the resume duration is timed in the
* driver.
*/
else if (typeReq == ClearPortFeature &&
wValue == USB_PORT_FEAT_SUSPEND) {
temp = ehci_readl(ehci, status_reg);
if ((temp & PORT_RESET) || !(temp & PORT_PE)) {
retval = -EPIPE;
goto done;
}
if (!(temp & PORT_SUSPEND))
goto done;
tegra->port_resuming = 1;
if (tegra->phy->usb_phy_type == TEGRA_USB_PHY_TYPE_UTMIP) {
/* disable interrupts */
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
/* Disable RUN bit. */
ehci->command &= ~CMD_RUN;
cmd_run = ehci_readl(ehci, &ehci->regs->command);
cmd_run &= ~CMD_RUN;
ehci_writel(ehci, cmd_run, &ehci->regs->command);
if (handshake (ehci, &ehci->regs->status,
STS_HALT, STS_HALT, 16 * 125))
pr_err("%s() timeout waiting for STS_HALT\n", __func__);
}
/* Disable disconnect detection during port resume */
tegra_usb_phy_preresume(tegra->phy, false);
#ifndef CONFIG_ARCH_TEGRA_2x_SOC
if (tegra->phy->usb_phy_type != TEGRA_USB_PHY_TYPE_UTMIP) {
#endif
ehci_dbg(ehci, "%s:USBSTS = 0x%x", __func__,
ehci_readl(ehci, &ehci->regs->status));
usbsts_reg = ehci_readl(ehci, &ehci->regs->status);
ehci_writel(ehci, usbsts_reg, &ehci->regs->status);
usbsts_reg = ehci_readl(ehci, &ehci->regs->status);
udelay(20);
if (handshake(ehci, &ehci->regs->status, STS_SRI, STS_SRI, 2000))
pr_err("%s: timeout set for STS_SRI\n", __func__);
usbsts_reg = ehci_readl(ehci, &ehci->regs->status);
ehci_writel(ehci, usbsts_reg, &ehci->regs->status);
if (handshake(ehci, &ehci->regs->status, STS_SRI, 0, 2000))
pr_err("%s: timeout clear STS_SRI\n", __func__);
if (handshake(ehci, &ehci->regs->status, STS_SRI, STS_SRI, 2000))
pr_err("%s: timeout set STS_SRI\n", __func__);
udelay(20);
#ifndef CONFIG_ARCH_TEGRA_2x_SOC
}
#endif
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
/* start resume signaling */
ehci_writel(ehci, temp | PORT_RESUME, status_reg);
ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25);
/* whoever resumes must GetPortStatus to complete it!! */
goto done;
}
/* Handle port reset here */
if ((hsic) && (typeReq == SetPortFeature) &&
((wValue == USB_PORT_FEAT_RESET) || (wValue == USB_PORT_FEAT_POWER))) {
selector = wIndex >> 8;
wIndex &= 0xff;
if (!wIndex || wIndex > ports) {
retval = -EPIPE;
goto done;
}
wIndex--;
status = 0;
temp = ehci_readl(ehci, status_reg);
if (temp & PORT_OWNER)
goto done;
temp &= ~PORT_RWC_BITS;
switch (wValue) {
case USB_PORT_FEAT_RESET:
{
if (temp & PORT_RESUME) {
retval = -EPIPE;
goto done;
}
/* line status bits may report this as low speed,
* which can be fine if this root hub has a
* transaction translator built in.
*/
if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
&& !ehci_is_TDI(ehci) && PORT_USB11 (temp)) {
ehci_dbg (ehci, "port %d low speed --> companion\n", wIndex + 1);
temp |= PORT_OWNER;
ehci_writel(ehci, temp, status_reg);
} else {
ehci_vdbg(ehci, "port %d reset\n", wIndex + 1);
temp &= ~PORT_PE;
/*
* caller must wait, then call GetPortStatus
* usb 2.0 spec says 50 ms resets on root
*/
ehci->reset_done[wIndex] = jiffies + msecs_to_jiffies(50);
ehci_writel(ehci, temp, status_reg);
if (hsic && (wIndex == 0))
tegra_usb_phy_bus_reset(tegra->phy);
}
break;
}
case USB_PORT_FEAT_POWER:
{
if (HCS_PPC(ehci->hcs_params))
ehci_writel(ehci, temp | PORT_POWER, status_reg);
if (hsic && (wIndex == 0))
tegra_usb_phy_bus_connect(tegra->phy);
break;
}
}
goto done;
}
static int tegra_ehci_hub_control(
struct usb_hcd *hcd,
u16 typeReq,
u16 wValue,
u16 wIndex,
char *buf,
u16 wLength
)
{
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
int ports = HCS_N_PORTS(ehci->hcs_params);
u32 temp, status;
u32 __iomem *status_reg;
u32 usbsts_reg;
unsigned long flags;
int retval = 0;
unsigned selector;
struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller);
bool hsic = false;
mutex_lock(&tegra->tegra_ehci_hcd_mutex);
if (!tegra->host_resumed) {
if (buf)
memset (buf, 0, wLength);
mutex_unlock(&tegra->tegra_ehci_hcd_mutex);
return retval;
}
hsic = (tegra->phy->usb_phy_type == TEGRA_USB_PHY_TYPE_HSIC);
/* log for resume fail */
printk(KERN_INFO"%s: typereq: %x wValue: %x USBMODE: %x, USBCMD: %x, PORTSC: %x, USBSTS: %x HOSTPC: %x \n",
__func__, typeReq, wValue,
readl(&ehci->regs->command + (USBMODE)),
readl(&ehci->regs->command),
readl(&ehci->regs->port_status[0]),
readl(&ehci->regs->status),
readl(hcd->regs + HOSTPC_REG_OFFSET));
/* 84717-1 patch */
if(hsic)
s_hsic_hcd = hcd;
/* 84717-1 patch */
status_reg = &ehci->regs->port_status[(wIndex & 0xff) - 1];
pr_info("%s hsic=%s typeReq=%x wValue=%x wIndex=%x\n",
__func__,hsic ? "true" : "false", typeReq, wValue, wIndex);
spin_lock_irqsave(&ehci->lock, flags);
/*
* In ehci_hub_control() for USB_PORT_FEAT_ENABLE clears the other bits
* that are write on clear, by writing back the register read value, so
* USB_PORT_FEAT_ENABLE is handled by masking the set on clear bits
*/
if (typeReq == ClearPortFeature && wValue == USB_PORT_FEAT_ENABLE) {
temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS;
ehci_writel(ehci, temp & ~PORT_PE, status_reg);
goto done;
} else if (typeReq == GetPortStatus) {
temp = ehci_readl(ehci, status_reg);
if (tegra->port_resuming && !(temp & PORT_SUSPEND) &&
time_after_eq(jiffies, ehci->reset_done[wIndex-1])) {
/* Resume completed, re-enable disconnect detection */
tegra->port_resuming = 0;
clear_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
ehci->reset_done[wIndex-1] = 0;
spin_unlock_irqrestore(&ehci->lock, flags);
tegra_usb_phy_postresume(tegra->phy, false);
spin_lock_irqsave(&ehci->lock, flags);
#ifndef CONFIG_ARCH_TEGRA_2x_SOC
if (tegra->phy->usb_phy_type == TEGRA_USB_PHY_TYPE_UTMIP) {
ehci->command |= CMD_RUN;
/*
* ehci run bit is disabled to avoid SOF.
* 2LS WAR is executed by now enable the run bit.
*/
ehci_writel(ehci, ehci->command,
&ehci->regs->command);
}
#endif
}
} else if (typeReq == SetPortFeature && wValue == USB_PORT_FEAT_SUSPEND) {
temp = ehci_readl(ehci, status_reg);
if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) != 0) {
retval = -EPIPE;
printk(KERN_INFO"%s retval=%d\n", __func__,retval);
goto done;
}
printk(KERN_INFO"%s USB_PORT_FEAT_SUSPEND\n", __func__);
tegra_usb_phy_presuspend(tegra->phy, false);
pr_info("%s: SetPortFeature->USB_PORT_FEAT_SUSPEND\n", __func__);
temp &= ~PORT_WKCONN_E;
temp |= PORT_WKDISC_E | PORT_WKOC_E;
ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
spin_unlock_irqrestore(&ehci->lock, flags);
/* Need a 4ms delay before the controller goes to suspend */
mdelay(4);
/*
* If a transaction is in progress, there may be a delay in
* suspending the port. Poll until the port is suspended.
*/
if (handshake(ehci, status_reg, PORT_SUSPEND,
PORT_SUSPEND, 5000))
pr_err("%s: timeout waiting for SUSPEND\n", __func__);
spin_lock_irqsave(&ehci->lock, flags);
set_bit((wIndex & 0xff) - 1, &ehci->suspended_ports);
spin_unlock_irqrestore(&ehci->lock, flags);
tegra_usb_phy_postsuspend(tegra->phy, false);
spin_lock_irqsave(&ehci->lock, flags);
goto done;
}
/*
* Tegra host controller will time the resume operation to clear the bit
* when the port control state switches to HS or FS Idle. This behavior
* is different from EHCI where the host controller driver is required
* to set this bit to a zero after the resume duration is timed in the
* driver.
*/
else if (typeReq == ClearPortFeature &&
wValue == USB_PORT_FEAT_SUSPEND) {
temp = ehci_readl(ehci, status_reg);
if ((temp & PORT_RESET) || !(temp & PORT_PE)) {
retval = -EPIPE;
goto done;
}
if (!(temp & PORT_SUSPEND))
goto done;
tegra->port_resuming = 1;
/* Disable disconnect detection during port resume */
spin_unlock_irqrestore(&ehci->lock, flags);
tegra_usb_phy_preresume(tegra->phy, false);
spin_lock_irqsave(&ehci->lock, flags);
pr_info("%s: ClearPortFeature->USB_PORT_FEAT_SUSPEND\n", __func__);
#ifndef CONFIG_ARCH_TEGRA_2x_SOC
if (tegra->phy->usb_phy_type != TEGRA_USB_PHY_TYPE_UTMIP) {
#endif
ehci_dbg(ehci, "%s:USBSTS = 0x%x", __func__, ehci_readl(ehci, &ehci->regs->status));
usbsts_reg = ehci_readl(ehci, &ehci->regs->status);
ehci_writel(ehci, usbsts_reg, &ehci->regs->status);
usbsts_reg = ehci_readl(ehci, &ehci->regs->status);
spin_unlock_irqrestore(&ehci->lock, flags);
udelay(20);
if (handshake(ehci, &ehci->regs->status, STS_SRI, STS_SRI, 2000))
pr_err("%s: timeout set for STS_SRI\n", __func__);
spin_lock_irqsave(&ehci->lock, flags);
spin_unlock_irqrestore(&ehci->lock, flags);
usbsts_reg = ehci_readl(ehci, &ehci->regs->status);
ehci_writel(ehci, usbsts_reg, &ehci->regs->status);
if (handshake(ehci, &ehci->regs->status, STS_SRI, 0, 2000))
pr_err("%s: timeout clear STS_SRI\n", __func__);
if (handshake(ehci, &ehci->regs->status, STS_SRI, STS_SRI, 2000))
pr_err("%s: timeout set STS_SRI\n", __func__);
udelay(20);
spin_lock_irqsave(&ehci->lock, flags);
#ifndef CONFIG_ARCH_TEGRA_2x_SOC
}
#endif
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
/* start resume signaling */
ehci_writel(ehci, temp | PORT_RESUME, status_reg);
ehci->reset_done[wIndex-1] = jiffies + msecs_to_jiffies(25);
/* whoever resumes must GetPortStatus to complete it!! */
goto done;
}
/* Handle port reset here */
if ((hsic) && (typeReq == SetPortFeature) &&
((wValue == USB_PORT_FEAT_RESET) || (wValue == USB_PORT_FEAT_POWER))) {
selector = wIndex >> 8;
wIndex &= 0xff;
if (!wIndex || wIndex > ports) {
retval = -EPIPE;
goto done;
}
wIndex--;
status = 0;
temp = ehci_readl(ehci, status_reg);
if (temp & PORT_OWNER)
goto done;
temp &= ~PORT_RWC_BITS;
switch (wValue) {
case USB_PORT_FEAT_RESET:
{
if (temp & PORT_RESUME) {
retval = -EPIPE;
goto done;
}
/* line status bits may report this as low speed,
* which can be fine if this root hub has a
* transaction translator built in.
*/
if ((temp & (PORT_PE|PORT_CONNECT)) == PORT_CONNECT
&& !ehci_is_TDI(ehci) && PORT_USB11 (temp)) {
ehci_dbg (ehci, "port %d low speed --> companion\n", wIndex + 1);
temp |= PORT_OWNER;
ehci_writel(ehci, temp, status_reg);
} else {
ehci_vdbg(ehci, "port %d reset\n", wIndex + 1);
temp &= ~PORT_PE;
/*
* caller must wait, then call GetPortStatus
* usb 2.0 spec says 50 ms resets on root
*/
ehci->reset_done[wIndex] = jiffies + msecs_to_jiffies(50);
ehci_writel(ehci, temp, status_reg);
if (hsic && (wIndex == 0)) {
spin_unlock_irqrestore(&ehci->lock,
flags);
tegra_usb_phy_bus_reset(tegra->phy);
spin_lock_irqsave(&ehci->lock, flags);
}
}
break;
}
case USB_PORT_FEAT_POWER:
{
if (HCS_PPC(ehci->hcs_params))
ehci_writel(ehci, temp | PORT_POWER, status_reg);
if (hsic && (wIndex == 0)) {
spin_unlock_irqrestore(&ehci->lock, flags);
tegra_usb_phy_bus_connect(tegra->phy);
spin_lock_irqsave(&ehci->lock, flags);
}
break;
}
}
goto done;
}
