/**
 * throttle_if_needed - wait for I/O completion if throttle points are reached
 * @flags: What to check and how to act.
 *
 * Check whether we need to wait for some I/O to complete. We always check
 * whether we have enough memory available, but may also (depending upon
 * @reason) check if the throughput throttle limit has been reached.
 **/
static int throttle_if_needed(int flags)
{
	int free_pages = nr_unallocated_buffer_pages();

	/* Getting low on memory and I/O is in progress? */
	while (unlikely(free_pages < free_mem_throttle) &&
	       atomic_read(&toi_io_in_progress) && !test_result_state(TOI_ABORTED)) {
		if (!(flags & THROTTLE_WAIT))
			return -ENOMEM;
		do_bio_wait(4);
		free_pages = nr_unallocated_buffer_pages();
	}

	while (!(flags & MEMORY_ONLY) && throughput_throttle &&
	       TOTAL_OUTSTANDING_IO >= throughput_throttle && !test_result_state(TOI_ABORTED)) {
		int result = toi_bio_queue_flush_pages(0);
		if (result)
			return result;
		atomic_inc(&reasons[6]);
		wait_event(num_in_progress_wait,
			   !atomic_read(&toi_io_in_progress) ||
			   TOTAL_OUTSTANDING_IO < throughput_throttle);
	}

	return 0;
}
Пример #2
0
/**
 * toi_go_atomic - do the actual atomic copy/restore
 * @state:	   The state to use for dpm_suspend_start & power_down calls.
 * @suspend_time:  Whether we're suspending or resuming.
 **/
int toi_go_atomic(pm_message_t state, int suspend_time)
{
  if (suspend_time) {
    if (platform_begin(1)) {
      set_abort_result(TOI_PLATFORM_PREP_FAILED);
      toi_end_atomic(ATOMIC_STEP_PLATFORM_END, suspend_time, 3);
      return 1;
    }

    if (dpm_prepare(PMSG_FREEZE)) {
      set_abort_result(TOI_DPM_PREPARE_FAILED);
      dpm_complete(PMSG_RECOVER);
      toi_end_atomic(ATOMIC_STEP_PLATFORM_END, suspend_time, 3);
      return 1;
    }
  }

	suspend_console();
	ftrace_stop();
	pm_restrict_gfp_mask();

  if (suspend_time) {
    if (dpm_suspend(state)) {
      set_abort_result(TOI_DPM_SUSPEND_FAILED);
      toi_end_atomic(ATOMIC_STEP_DEVICE_RESUME, suspend_time, 3);
      return 1;
    }
  } else {
    if (dpm_suspend_start(state)) {
      set_abort_result(TOI_DPM_SUSPEND_FAILED);
      toi_end_atomic(ATOMIC_STEP_DEVICE_RESUME, suspend_time, 3);
      return 1;
    }
  }

	/* At this point, dpm_suspend_start() has been called, but *not*
	 * dpm_suspend_noirq(). We *must* dpm_suspend_noirq() now.
	 * Otherwise, drivers for some devices (e.g. interrupt controllers)
	 * become desynchronized with the actual state of the hardware
	 * at resume time, and evil weirdness ensues.
	 */

	if (dpm_suspend_end(state)) {
		set_abort_result(TOI_DEVICE_REFUSED);
		toi_end_atomic(ATOMIC_STEP_DEVICE_RESUME, suspend_time, 1);
		return 1;
	}

	if (suspend_time) {
		if (platform_pre_snapshot(1))
			set_abort_result(TOI_PRE_SNAPSHOT_FAILED);
	} else {
		if (platform_pre_restore(1))
			set_abort_result(TOI_PRE_RESTORE_FAILED);
	}

	if (test_result_state(TOI_ABORTED)) {
		toi_end_atomic(ATOMIC_STEP_PLATFORM_FINISH, suspend_time, 1);
		return 1;
	}

	if (test_action_state(TOI_LATE_CPU_HOTPLUG)) {
		if (disable_nonboot_cpus()) {
			set_abort_result(TOI_CPU_HOTPLUG_FAILED);
			toi_end_atomic(ATOMIC_STEP_CPU_HOTPLUG,
					suspend_time, 1);
			return 1;
		}
	}

	local_irq_disable();

	if (syscore_suspend()) {
		set_abort_result(TOI_SYSCORE_REFUSED);
		toi_end_atomic(ATOMIC_STEP_IRQS, suspend_time, 1);
		return 1;
	}

	if (suspend_time && pm_wakeup_pending()) {
		set_abort_result(TOI_WAKEUP_EVENT);
		toi_end_atomic(ATOMIC_STEP_SYSCORE_RESUME, suspend_time, 1);
		return 1;
	}
	return 0;
}
static void __toi_power_down(int method)
{
	int error;

	toi_cond_pause(1, test_action_state(TOI_REBOOT) ? "Ready to reboot." :
			"Powering down.");

	if (test_result_state(TOI_ABORTED))
		goto out;

	if (test_action_state(TOI_REBOOT))
		kernel_restart(NULL);

	switch (method) {
	case 0:
		break;
	case 3:
		/*
		 * Re-read the overwritten part of pageset2 to make post-resume
		 * faster.
		 */
		if (read_pageset2(1))
			panic("Attempt to reload pagedir 2 failed. "
					"Try rebooting.");

		pm_prepare_console();

		error = pm_notifier_call_chain(PM_SUSPEND_PREPARE);
		if (!error) {
			pm_restore_gfp_mask();
			error = suspend_devices_and_enter(PM_SUSPEND_MEM);
			pm_restrict_gfp_mask();
			if (!error)
				did_suspend_to_both = 1;
		}
		pm_notifier_call_chain(PM_POST_SUSPEND);
		pm_restore_console();

        // jonathan.jmchen: FIXME, Create API to add another wakeup source to power down,
        // if system is idle after xxx (e.g., 5 min) without user interaction!!

		/* Success - we're now post-resume-from-ram */
		if (did_suspend_to_both)
			return;

		/* Failed to suspend to ram - do normal power off */
		break;
	case 4:
		/*
		 * If succeeds, doesn't return. If fails, do a simple
		 * powerdown.
		 */
		hibernation_platform_enter();
		break;
	case 5:
		/* Historic entry only now */
		break;
	}

	if (method && method != 5)
		toi_cond_pause(1,
			"Falling back to alternate power off method.");

	if (test_result_state(TOI_ABORTED))
		goto out;

	kernel_power_off();
	kernel_halt();
	toi_cond_pause(1, "Powerdown failed.");
	while (1)
		cpu_relax();

out:
	if (read_pageset2(1))
		panic("Attempt to reload pagedir 2 failed. Try rebooting.");
	return;
}
/**
 * toi_go_atomic - do the actual atomic copy/restore
 * @state:	   The state to use for dpm_suspend_start & power_down calls.
 * @suspend_time:  Whether we're suspending or resuming.
 **/
int toi_go_atomic(pm_message_t state, int suspend_time)
{
	if (suspend_time) {
		if (platform_begin(1)) {
			set_abort_result(TOI_PLATFORM_PREP_FAILED);
			toi_end_atomic(ATOMIC_STEP_PLATFORM_END, suspend_time, 3);
			hib_log("FAILED @line:%d suspend(%d) pm_state(%d)\n", __LINE__,
				suspend_time, state.event);
			return 1;
		}

		if (dpm_prepare(PMSG_FREEZE)) {
			set_abort_result(TOI_DPM_PREPARE_FAILED);
			dpm_complete(PMSG_RECOVER);
			toi_end_atomic(ATOMIC_STEP_PLATFORM_END, suspend_time, 3);
			hib_log("FAILED @line:%d suspend(%d) pm_state(%d)\n", __LINE__,
				suspend_time, state.event);
			return 1;
		}
	}

	suspend_console();
	ftrace_stop();
	pm_restrict_gfp_mask();

	if (suspend_time) {
#if 0				/* FIXME: jonathan.jmchen: trick code here to let dpm_suspend succeeded, NEED to find out the root cause!! */
		if (events_check_enabled) {
			hib_log("play trick here set events_check_enabled(%d) = false!!\n",
				events_check_enabled);
			events_check_enabled = false;
		}
#endif
		if (dpm_suspend(state)) {
			set_abort_result(TOI_DPM_SUSPEND_FAILED);
			toi_end_atomic(ATOMIC_STEP_DEVICE_RESUME, suspend_time, 3);
			hib_log("FAILED @line:%d suspend(%d) pm_state(%d) toi_result(0x%#lx)\n",
				__LINE__, suspend_time, state.event, toi_result);
			return 1;
		}
	} else {
		if (dpm_suspend_start(state)) {
			set_abort_result(TOI_DPM_SUSPEND_FAILED);
			toi_end_atomic(ATOMIC_STEP_DEVICE_RESUME, suspend_time, 3);
			hib_log("FAILED @line:%d suspend(%d) pm_state(%d) toi_result(0x%#lx)\n",
				__LINE__, suspend_time, state.event, toi_result);
			return 1;
		}
	}

	/* At this point, dpm_suspend_start() has been called, but *not*
	 * dpm_suspend_noirq(). We *must* dpm_suspend_noirq() now.
	 * Otherwise, drivers for some devices (e.g. interrupt controllers)
	 * become desynchronized with the actual state of the hardware
	 * at resume time, and evil weirdness ensues.
	 */

	if (dpm_suspend_end(state)) {
		set_abort_result(TOI_DEVICE_REFUSED);
		toi_end_atomic(ATOMIC_STEP_DEVICE_RESUME, suspend_time, 1);
		hib_log("FAILED @line:%d suspend(%d) pm_state(%d) toi_result(0x%#lx)\n", __LINE__,
			suspend_time, state.event, toi_result);
		return 1;
	}

	if (suspend_time) {
		if (platform_pre_snapshot(1))
			set_abort_result(TOI_PRE_SNAPSHOT_FAILED);
	} else {
		if (platform_pre_restore(1))
			set_abort_result(TOI_PRE_RESTORE_FAILED);
	}

	if (test_result_state(TOI_ABORTED)) {
		toi_end_atomic(ATOMIC_STEP_PLATFORM_FINISH, suspend_time, 1);
		hib_log("FAILED @line:%d suspend(%d) pm_state(%d) toi_result(0x%#lx)\n", __LINE__,
			suspend_time, state.event, toi_result);
		return 1;
	}

	if (test_action_state(TOI_LATE_CPU_HOTPLUG)) {
		if (disable_nonboot_cpus()) {
			set_abort_result(TOI_CPU_HOTPLUG_FAILED);
			toi_end_atomic(ATOMIC_STEP_CPU_HOTPLUG, suspend_time, 1);
			hib_log("FAILED @line:%d suspend(%d) pm_state(%d) toi_result(0x%#lx)\n",
				__LINE__, suspend_time, state.event, toi_result);
			return 1;
		}
	}

	local_irq_disable();

	if (syscore_suspend()) {
		set_abort_result(TOI_SYSCORE_REFUSED);
		toi_end_atomic(ATOMIC_STEP_IRQS, suspend_time, 1);
		hib_log("FAILED @line:%d suspend(%d) pm_state(%d) toi_result(0x%#lx)\n", __LINE__,
			suspend_time, state.event, toi_result);
		return 1;
	}

	if (suspend_time && pm_wakeup_pending()) {
		set_abort_result(TOI_WAKEUP_EVENT);
		toi_end_atomic(ATOMIC_STEP_SYSCORE_RESUME, suspend_time, 1);
		hib_log("FAILED @line:%d suspend(%d) pm_state(%d) toi_result(0x%#lx)\n", __LINE__,
			suspend_time, state.event, toi_result);
		return 1;
	}
	hib_log("SUCCEEDED @line:%d suspend(%d) pm_state(%d)\n", __LINE__, suspend_time,
		state.event);
	return 0;
}