uint8_t matrix_scan(void)
{
uint8_t mchanged;
uint8_t row;
uint8_t col;
uint32_t scans[2]; //PA PB
if (timer_read64() < mdebouncing) return 1; //mdebouncing == 0 when no debouncing active
memset(mlatest, 0, MATRIX_ROWS * sizeof(matrix_row_t)); //Zero the result buffer
for (col = 0; col < MATRIX_COLS; col++)
{
PORT->Group[col_ports[col]].OUTSET.reg = 1 << col_pins[col]; //Set col output
wait_us(1); //Delay for output
scans[PA] = PORT->Group[PA].IN.reg & row_masks[PA]; //Read PA row pins data
scans[PB] = PORT->Group[PB].IN.reg & row_masks[PB]; //Read PB row pins data
PORT->Group[col_ports[col]].OUTCLR.reg = 1 << col_pins[col]; //Clear col output
for (row = 0; row < MATRIX_ROWS; row++)
{
//Move scan bits from scans array into proper row bit locations
if (scans[row_ports[row]] & (1 << row_pins[row]))
mlatest[row] |= 1 << col;
}
}
mchanged = 0; //Default to no matrix change since last
for (row = 0; row < MATRIX_ROWS; row++)
{
if (mlast[row] != mlatest[row])
mchanged = 1;
mlast[row] = mlatest[row];
}
if (!mchanged)
{
for (row = 0; row < MATRIX_ROWS; row++)
mdebounced[row] = mlatest[row];
mdebouncing = 0;
}
else
{
//Begin or extend debounce on change
mdebouncing = timer_read64() + DEBOUNCING_DELAY;
}
matrix_scan_quantum();
return 1;
}
void main_subtask_usb_extra_device(void)
{
static uint64_t next_usb_checkup = 0;
if (timer_read64() > next_usb_checkup)
{
next_usb_checkup = timer_read64() + 10;
USB_HandleExtraDevice();
}
}
void main_subtask_power_check(void)
{
static uint64_t next_5v_checkup = 0;
if (timer_read64() > next_5v_checkup)
{
next_5v_checkup = timer_read64() + 5;
v_5v = adc_get(ADC_5V);
v_5v_avg = 0.9 * v_5v_avg + 0.1 * v_5v;
#ifdef RGB_MATRIX_ENABLE
gcr_compute();
#endif
}
}
void main_subtask_usb_state(void)
{
static uint64_t fsmstate_on_delay = 0; //Delay timer to be sure USB is actually operating before bringing up hardware
uint8_t fsmstate_now = USB->DEVICE.FSMSTATUS.reg; //Current state from hardware register
if (fsmstate_now == USB_FSMSTATUS_FSMSTATE_SUSPEND_Val) //If USB SUSPENDED
{
fsmstate_on_delay = 0; //Clear ON delay timer
if (g_usb_state != USB_FSMSTATUS_FSMSTATE_SUSPEND_Val) //If previously not SUSPENDED
{
suspend_power_down(); //Run suspend routine
g_usb_state = fsmstate_now; //Save current USB state
}
}
else if (fsmstate_now == USB_FSMSTATUS_FSMSTATE_SLEEP_Val) //Else if USB SLEEPING
{
fsmstate_on_delay = 0; //Clear ON delay timer
if (g_usb_state != USB_FSMSTATUS_FSMSTATE_SLEEP_Val) //If previously not SLEEPING
{
suspend_power_down(); //Run suspend routine
g_usb_state = fsmstate_now; //Save current USB state
}
}
else if (fsmstate_now == USB_FSMSTATUS_FSMSTATE_ON_Val) //Else if USB ON
{
if (g_usb_state != USB_FSMSTATUS_FSMSTATE_ON_Val) //If previously not ON
{
if (fsmstate_on_delay == 0) //If ON delay timer is cleared
{
fsmstate_on_delay = timer_read64() + 250; //Set ON delay timer
}
else if (timer_read64() > fsmstate_on_delay) //Else if ON delay timer is active and timed out
{
suspend_wakeup_init(); //Run wakeup routine
g_usb_state = fsmstate_now; //Save current USB state
}
}
}
else //Else if USB is in a state not being tracked
{
fsmstate_on_delay = 0; //Clear ON delay timer
}
}
uint32_t timer_elapsed64(uint32_t tlast)
{
uint64_t tnow = timer_read64();
return (tnow >= tlast ? tnow - tlast : UINT64_MAX - tlast + tnow);
}
int main(void)
{
DBG_LED_ENA;
DBG_1_ENA;
DBG_1_OFF;
DBG_2_ENA;
DBG_2_OFF;
DBG_3_ENA;
DBG_3_OFF;
debug_code_init();
CLK_init();
ADC0_init();
SR_EXP_Init();
#ifdef RGB_MATRIX_ENABLE
i2c1_init();
#endif // RGB_MATRIX_ENABLE
matrix_init();
USB2422_init();
DBGC(DC_MAIN_UDC_START_BEGIN);
udc_start();
DBGC(DC_MAIN_UDC_START_COMPLETE);
DBGC(DC_MAIN_CDC_INIT_BEGIN);
CDC_init();
DBGC(DC_MAIN_CDC_INIT_COMPLETE);
while (USB2422_Port_Detect_Init() == 0) {}
DBG_LED_OFF;
#ifdef RGB_MATRIX_ENABLE
while (I2C3733_Init_Control() != 1) {}
while (I2C3733_Init_Drivers() != 1) {}
I2C_DMAC_LED_Init();
i2c_led_q_init();
for (uint8_t drvid = 0; drvid < ISSI3733_DRIVER_COUNT; drvid++)
I2C_LED_Q_ONOFF(drvid); //Queue data
#endif // RGB_MATRIX_ENABLE
keyboard_setup();
keyboard_init();
host_set_driver(&arm_atsam_driver);
#ifdef CONSOLE_ENABLE
uint64_t next_print = 0;
#endif //CONSOLE_ENABLE
v_5v_avg = adc_get(ADC_5V);
debug_code_disable();
while (1)
{
main_subtasks(); //Note these tasks will also be run while waiting for USB keyboard polling intervals
if (g_usb_state == USB_FSMSTATUS_FSMSTATE_SUSPEND_Val || g_usb_state == USB_FSMSTATUS_FSMSTATE_SLEEP_Val)
{
if (suspend_wakeup_condition())
{
udc_remotewakeup(); //Send remote wakeup signal
wait_ms(50);
}
continue;
}
keyboard_task();
#ifdef CONSOLE_ENABLE
if (timer_read64() > next_print)
{
next_print = timer_read64() + 250;
//Add any debug information here that you want to see very often
//dprintf("5v=%u 5vu=%u dlow=%u dhi=%u gca=%u gcd=%u\r\n", v_5v, v_5v_avg, v_5v_avg - V5_LOW, v_5v_avg - V5_HIGH, gcr_actual, gcr_desired);
}
#endif //CONSOLE_ENABLE
}
return 1;
}
