static int h4_open(void)
{
BT_DBG("");
uart_irq_rx_disable(h4_dev);
uart_irq_tx_disable(h4_dev);
#if defined(CONFIG_BT_NRF51_PM)
if (nrf51_init(h4_dev) < 0) {
return -EIO;
}
#else
h4_discard(h4_dev, 32);
#endif
uart_irq_callback_set(h4_dev, bt_uart_isr);
k_thread_create(&rx_thread_data, rx_thread_stack,
K_THREAD_STACK_SIZEOF(rx_thread_stack),
rx_thread, NULL, NULL, NULL,
K_PRIO_COOP(CONFIG_BT_RX_PRIO),
0, K_NO_WAIT);
return 0;
}
static void test_by_irq(struct device *dev)
{
char data;
uart_irq_callback_set(dev, interrupt_handler);
write_buf_irq(dev, banner1, strlen(banner1));
read_char_irq(dev, &data);
write_buf_irq(dev, banner2, strlen(banner2));
write_buf_irq(dev, &data, sizeof(data));
write_buf_irq(dev, "\n", 1);
}
static void console_input_init(void)
{
uint8_t c;
uart_irq_rx_disable(uart_console_dev);
uart_irq_tx_disable(uart_console_dev);
uart_irq_callback_set(uart_console_dev, uart_console_isr);
/* Drain the fifo */
while (uart_irq_rx_ready(uart_console_dev)) {
uart_fifo_read(uart_console_dev, &c, 1);
}
uart_irq_rx_enable(uart_console_dev);
}
static void uart_pipe_setup(struct device *uart)
{
uint8_t c;
uart_irq_rx_disable(uart);
uart_irq_tx_disable(uart);
/* Drain the fifo */
while (uart_fifo_read(uart, &c, 1)) {
continue;
}
uart_irq_callback_set(uart, uart_pipe_isr);
uart_irq_rx_enable(uart);
}
static int h5_open(void)
{
BT_DBG("");
uart_irq_rx_disable(h5_dev);
uart_irq_tx_disable(h5_dev);
bt_uart_drain(h5_dev);
uart_irq_callback_set(h5_dev, bt_uart_isr);
h5_init();
uart_irq_rx_enable(h5_dev);
return 0;
}
static int h4_open(void)
{
BT_DBG("");
uart_irq_rx_disable(h4_dev);
uart_irq_tx_disable(h4_dev);
/* Drain the fifo */
while (uart_irq_rx_ready(h4_dev)) {
unsigned char c;
uart_fifo_read(h4_dev, &c, 1);
}
uart_irq_callback_set(h4_dev, bt_uart_isr);
uart_irq_rx_enable(h4_dev);
return 0;
}
static int h4_open(void)
{
BT_DBG("");
uart_irq_rx_disable(h4_dev);
uart_irq_tx_disable(h4_dev);
#if defined(CONFIG_BLUETOOTH_NRF51_PM)
if (nrf51_init(h4_dev) < 0) {
return -EIO;
}
#else
bt_uart_drain(h4_dev);
#endif
uart_irq_callback_set(h4_dev, bt_uart_isr);
uart_irq_rx_enable(h4_dev);
return 0;
}
int main(int argc, char const *argv[])
{
int ret;
printf("start buffers: %d, size=%d total size=%d\n",
sizeof(buf_pool)/sizeof(uart_buf_t), sizeof(uart_buf_t), sizeof(buf_pool));
uart_dev = device_get_binding(CONFIG_CDC_ACM_PORT_NAME);
if (uart_dev == NULL) {
printf("%s: error\n", __FUNCTION__);
return 0;
}
ret = uart_line_ctrl_set(uart_dev, LINE_CTRL_BAUD_RATE, 115200);
if (ret)
printf("Baudrate set failed %d\n", ret);
k_sleep(1000);
uart_irq_rx_disable(uart_dev);
uart_irq_tx_disable(uart_dev);
/* drain the fifo */
uint8_t c;
while(uart_fifo_read(uart_dev, &c, 1)) {
continue;
}
uart_irq_callback_set(uart_dev, interrupt_handler);
uart_irq_rx_enable(uart_dev);
read_and_echo_data(uart_dev);
return 0;
}
void main(void)
{
struct device *dev;
u32_t baudrate, dtr = 0;
int ret;
dev = device_get_binding(CONFIG_CDC_ACM_PORT_NAME);
if (!dev) {
SYS_LOG_ERR("CDC ACM device not found");
return;
}
SYS_LOG_DBG("Wait for DTR");
while (1) {
uart_line_ctrl_get(dev, LINE_CTRL_DTR, &dtr);
if (dtr)
break;
}
uart_dev = dev;
SYS_LOG_DBG("DTR set, continue");
#if CONFIG_DCD_DSR
/* They are optional, we use them to test the interrupt endpoint */
ret = uart_line_ctrl_set(dev, LINE_CTRL_DCD, 1);
if (ret)
printk("Failed to set DCD, ret code %d\n", ret);
ret = uart_line_ctrl_set(dev, LINE_CTRL_DSR, 1);
if (ret)
printk("Failed to set DSR, ret code %d\n", ret);
/* Wait 1 sec for the host to do all settings */
sys_thread_busy_wait(1000000);
#endif
ret = uart_line_ctrl_get(dev, LINE_CTRL_BAUD_RATE, &baudrate);
if (ret)
printk("Failed to get baudrate, ret code %d\n", ret);
else
printk("Baudrate detected: %d\n", baudrate);
SYS_LOG_INF("USB serial initialized");
/* Initialize net_pkt */
net_pkt_init();
/* Initialize RX queue */
init_rx_queue();
/* Initialize TX queue */
init_tx_queue();
/* Initialize ieee802154 device */
if (!init_ieee802154()) {
SYS_LOG_ERR("Unable to initialize ieee802154");
return;
};
uart_irq_callback_set(dev, interrupt_handler);
/* Enable rx interrupts */
uart_irq_rx_enable(dev);
/* Enable tx interrupts */
uart_irq_tx_enable(dev);
}