void
ucomreadcb(struct usbd_xfer *xfer, void *p, usbd_status status)
{
struct ucom_softc *sc = (struct ucom_softc *)p;
struct tty *tp = sc->sc_tty;
int (*rint)(int c, struct tty *tp) = LINESW(tp, l_rint);
usbd_status err;
u_int32_t cc;
u_char *cp;
int s;
DPRINTFN(5,("ucomreadcb: status=%d\n", status));
if (status == USBD_CANCELLED || status == USBD_IOERROR ||
usbd_is_dying(sc->sc_uparent)) {
DPRINTF(("ucomreadcb: dying\n"));
/* Send something to wake upper layer */
s = spltty();
(*rint)('\n', tp);
ttwakeup(tp);
splx(s);
return;
}
if (status) {
if (sc->sc_bulkin_pipe != NULL) {
usbd_clear_endpoint_stall_async(sc->sc_bulkin_pipe);
/* XXX we should restart after some delay. */
return;
}
}
usbd_get_xfer_status(xfer, NULL, (void *)&cp, &cc, NULL);
DPRINTFN(5,("ucomreadcb: got %d chars, tp=%p\n", cc, tp));
if (sc->sc_methods->ucom_read != NULL)
sc->sc_methods->ucom_read(sc->sc_parent, sc->sc_portno,
&cp, &cc);
s = spltty();
/* Give characters to tty layer. */
while (cc-- > 0) {
DPRINTFN(7,("ucomreadcb: char=0x%02x\n", *cp));
if ((*rint)(*cp++, tp) == -1) {
/* XXX what should we do? */
printf("%s: lost %d chars\n", sc->sc_dev.dv_xname,
cc);
break;
}
}
splx(s);
err = ucomstartread(sc);
if (err) {
printf("%s: read start failed\n", sc->sc_dev.dv_xname);
/* XXX what should we dow now? */
}
}
int
ucomopen(dev_t dev, int flag, int mode, struct proc *p)
{
int unit = UCOMUNIT(dev);
usbd_status err;
struct ucom_softc *sc;
struct tty *tp;
struct termios t;
int s;
int error;
if (unit >= ucom_cd.cd_ndevs)
return (ENXIO);
sc = ucom_cd.cd_devs[unit];
if (sc == NULL)
return (ENXIO);
if (sc->sc_dying)
return (EIO);
if (ISSET(sc->sc_dev.dv_flags, DVF_ACTIVE) == 0)
return (ENXIO);
/* open the pipes if this is the first open */
ucom_lock(sc);
if (sc->sc_open++ == 0) {
s = splusb();
DPRINTF(("ucomopen: open pipes in=%d out=%d\n",
sc->sc_bulkin_no, sc->sc_bulkout_no));
DPRINTF(("ucomopen: hid %p pipes in=%p out=%p\n",
sc->sc_uhidev, sc->sc_ipipe, sc->sc_opipe));
if (sc->sc_bulkin_no != -1) {
/* Open the bulk pipes */
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin_no, 0,
&sc->sc_bulkin_pipe);
if (err) {
DPRINTF(("%s: open bulk out error (addr %d), err=%s\n",
sc->sc_dev.dv_xname, sc->sc_bulkin_no,
usbd_errstr(err)));
error = EIO;
goto fail_0;
}
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout_no,
USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe);
if (err) {
DPRINTF(("%s: open bulk in error (addr %d), err=%s\n",
sc->sc_dev.dv_xname, sc->sc_bulkout_no,
usbd_errstr(err)));
error = EIO;
goto fail_1;
}
/* Allocate a request and an input buffer and start reading. */
sc->sc_ixfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_ixfer == NULL) {
error = ENOMEM;
goto fail_2;
}
sc->sc_ibuf = usbd_alloc_buffer(sc->sc_ixfer,
sc->sc_ibufsizepad);
if (sc->sc_ibuf == NULL) {
error = ENOMEM;
goto fail_2;
}
sc->sc_oxfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_oxfer == NULL) {
error = ENOMEM;
goto fail_3;
}
} else {
/*
* input/output pipes and xfers already allocated
* as is the input buffer.
*/
sc->sc_ipipe = sc->sc_uhidev->sc_ipipe;
sc->sc_ixfer = sc->sc_uhidev->sc_ixfer;
sc->sc_opipe = sc->sc_uhidev->sc_opipe;
sc->sc_oxfer = sc->sc_uhidev->sc_oxfer;
}
sc->sc_obuf = usbd_alloc_buffer(sc->sc_oxfer,
sc->sc_obufsize + sc->sc_opkthdrlen);
if (sc->sc_obuf == NULL) {
error = ENOMEM;
goto fail_4;
}
if (sc->sc_methods->ucom_open != NULL) {
error = sc->sc_methods->ucom_open(sc->sc_parent,
sc->sc_portno);
if (error) {
ucom_cleanup(sc);
splx(s);
ucom_unlock(sc);
return (error);
}
}
ucom_status_change(sc);
ucomstartread(sc);
splx(s);
}
ucom_unlock(sc);
s = spltty();
tp = sc->sc_tty;
splx(s);
DPRINTF(("ucomopen: unit=%d, tp=%p\n", unit, tp));
tp->t_dev = dev;
if (!ISSET(tp->t_state, TS_ISOPEN)) {
SET(tp->t_state, TS_WOPEN);
ttychars(tp);
/*
* Initialize the termios status to the defaults. Add in the
* sticky bits from TIOCSFLAGS.
*/
t.c_ispeed = 0;
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
if (ISSET(sc->sc_swflags, TIOCFLAG_CLOCAL))
SET(t.c_cflag, CLOCAL);
if (ISSET(sc->sc_swflags, TIOCFLAG_CRTSCTS))
SET(t.c_cflag, CRTSCTS);
if (ISSET(sc->sc_swflags, TIOCFLAG_MDMBUF))
SET(t.c_cflag, MDMBUF);
/* Make sure ucomparam() will do something. */
tp->t_ospeed = 0;
(void) ucomparam(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
s = spltty();
ttsetwater(tp);
/*
* Turn on DTR. We must always do this, even if carrier is not
* present, because otherwise we'd have to use TIOCSDTR
* immediately after setting CLOCAL, which applications do not
* expect. We always assert DTR while the device is open
* unless explicitly requested to deassert it.
*/
ucom_dtr(sc, 1);
/* XXX CLR(sc->sc_rx_flags, RX_ANY_BLOCK);*/
ucom_hwiflow(sc);
if (ISSET(sc->sc_swflags, TIOCFLAG_SOFTCAR) || UCOMCUA(dev) ||
ISSET(sc->sc_msr, UMSR_DCD) || ISSET(tp->t_cflag, MDMBUF))
SET(tp->t_state, TS_CARR_ON);
else
CLR(tp->t_state, TS_CARR_ON);
} else if (ISSET(tp->t_state, TS_XCLUDE) && p->p_ucred->cr_uid != 0) {
error = EBUSY;
goto bad;
} else
s = spltty();
if (UCOMCUA(dev)) {
if (ISSET(tp->t_state, TS_ISOPEN)) {
/* Someone is already dialed in */
error = EBUSY;
goto bad1;
}
sc->sc_cua = 1;
} else {
/* tty (not cua) device, wait for carrier */
if (ISSET(flag, O_NONBLOCK)) {
if (sc->sc_cua) {
error = EBUSY;
goto bad1;
}
} else {
while (sc->sc_cua || (!ISSET(tp->t_cflag, CLOCAL) &&
!ISSET(tp->t_state, TS_CARR_ON))) {
SET(tp->t_state, TS_WOPEN);
error = ttysleep(tp, &tp->t_rawq,
TTIPRI | PCATCH, ttopen, 0);
/*
* If TS_WOPEN has been reset, that means the
* cua device has been closed. We don't want
* to fail in that case, so just go around
* again.
*/
if (error && ISSET(tp->t_state, TS_WOPEN)) {
CLR(tp->t_state, TS_WOPEN);
goto bad1;
}
}
}
}
splx(s);
error = ttyopen(UCOMUNIT(dev), tp);
if (error)
goto bad;
error = (*LINESW(tp, l_open))(dev, tp);
if (error)
goto bad;
return (0);
fail_4:
if (sc->sc_uhidev == NULL)
usbd_free_xfer(sc->sc_oxfer);
sc->sc_oxfer = NULL;
fail_3:
usbd_free_xfer(sc->sc_ixfer);
sc->sc_ixfer = NULL;
fail_2:
usbd_close_pipe(sc->sc_bulkout_pipe);
sc->sc_bulkout_pipe = NULL;
fail_1:
usbd_close_pipe(sc->sc_bulkin_pipe);
sc->sc_bulkin_pipe = NULL;
fail_0:
splx(s);
ucom_unlock(sc);
return (error);
bad1:
splx(s);
bad:
ucom_lock(sc);
ucom_cleanup(sc);
ucom_unlock(sc);
return (error);
}
Static int
ucomopen(dev_t dev, int flag, int mode, usb_proc_ptr p)
{
int unit = UCOMUNIT(dev);
struct ucom_softc *sc;
usbd_status err;
struct tty *tp;
int s;
int error;
USB_GET_SC_OPEN(ucom, unit, sc);
if (sc->sc_dying)
return (ENXIO);
tp = sc->sc_tty;
DPRINTF(("%s: ucomopen: tp = %p\n", USBDEVNAME(sc->sc_dev), tp));
if (ISSET(tp->t_state, TS_ISOPEN) &&
ISSET(tp->t_state, TS_XCLUDE) &&
suser(p))
return (EBUSY);
/*
* Do the following iff this is a first open.
*/
s = spltty();
while (sc->sc_opening)
tsleep(&sc->sc_opening, PRIBIO, "ucomop", 0);
sc->sc_opening = 1;
if (!ISSET(tp->t_state, TS_ISOPEN)) {
struct termios t;
sc->sc_poll = 0;
sc->sc_lsr = sc->sc_msr = sc->sc_mcr = 0;
tp->t_dev = dev;
/*
* Initialize the termios status to the defaults. Add in the
* sticky bits from TIOCSFLAGS.
*/
t.c_ispeed = 0;
t.c_ospeed = TTYDEF_SPEED;
t.c_cflag = TTYDEF_CFLAG;
/* Make sure ucomparam() will do something. */
tp->t_ospeed = 0;
(void)ucomparam(tp, &t);
tp->t_iflag = TTYDEF_IFLAG;
tp->t_oflag = TTYDEF_OFLAG;
tp->t_lflag = TTYDEF_LFLAG;
ttychars(tp);
ttsetwater(tp);
/*
* Turn on DTR. We must always do this, even if carrier is not
* present, because otherwise we'd have to use TIOCSDTR
* immediately after setting CLOCAL, which applications do not
* expect. We always assert DTR while the device is open
* unless explicitly requested to deassert it.
*/
(void)ucomctl(sc, TIOCM_DTR | TIOCM_RTS, DMBIS);
/* Device specific open */
if (sc->sc_callback->ucom_open != NULL) {
error = sc->sc_callback->ucom_open(sc->sc_parent,
sc->sc_portno);
if (error) {
ucom_cleanup(sc);
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
return (error);
}
}
DPRINTF(("ucomopen: open pipes in = %d out = %d\n",
sc->sc_bulkin_no, sc->sc_bulkout_no));
/* Open the bulk pipes */
/* Bulk-in pipe */
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkin_no, 0,
&sc->sc_bulkin_pipe);
if (err) {
printf("%s: open bulk in error (addr %d): %s\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkin_no,
usbd_errstr(err));
error = EIO;
goto fail_0;
}
/* Bulk-out pipe */
err = usbd_open_pipe(sc->sc_iface, sc->sc_bulkout_no,
USBD_EXCLUSIVE_USE, &sc->sc_bulkout_pipe);
if (err) {
printf("%s: open bulk out error (addr %d): %s\n",
USBDEVNAME(sc->sc_dev), sc->sc_bulkout_no,
usbd_errstr(err));
error = EIO;
goto fail_1;
}
/* Allocate a request and an input buffer and start reading. */
sc->sc_ixfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_ixfer == NULL) {
error = ENOMEM;
goto fail_2;
}
sc->sc_ibuf = usbd_alloc_buffer(sc->sc_ixfer,
sc->sc_ibufsizepad);
if (sc->sc_ibuf == NULL) {
error = ENOMEM;
goto fail_3;
}
sc->sc_oxfer = usbd_alloc_xfer(sc->sc_udev);
if (sc->sc_oxfer == NULL) {
error = ENOMEM;
goto fail_3;
}
sc->sc_obuf = usbd_alloc_buffer(sc->sc_oxfer,
sc->sc_obufsize +
sc->sc_opkthdrlen);
if (sc->sc_obuf == NULL) {
error = ENOMEM;
goto fail_4;
}
/*
* Handle initial DCD.
*/
if (ISSET(sc->sc_msr, UMSR_DCD) ||
(minor(dev) & UCOM_CALLOUT_MASK))
(*linesw[tp->t_line].l_modem)(tp, 1);
ucomstartread(sc);
}
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
error = ttyopen(dev, tp);
if (error)
goto bad;
error = (*linesw[tp->t_line].l_open)(dev, tp);
if (error)
goto bad;
disc_optim(tp, &tp->t_termios, sc);
DPRINTF(("%s: ucomopen: success\n", USBDEVNAME(sc->sc_dev)));
sc->sc_poll = 1;
sc->sc_refcnt++;
return (0);
fail_4:
usbd_free_xfer(sc->sc_oxfer);
sc->sc_oxfer = NULL;
fail_3:
usbd_free_xfer(sc->sc_ixfer);
sc->sc_ixfer = NULL;
fail_2:
usbd_close_pipe(sc->sc_bulkout_pipe);
sc->sc_bulkout_pipe = NULL;
fail_1:
usbd_close_pipe(sc->sc_bulkin_pipe);
sc->sc_bulkin_pipe = NULL;
fail_0:
sc->sc_opening = 0;
wakeup(&sc->sc_opening);
splx(s);
return (error);
bad:
if (!ISSET(tp->t_state, TS_ISOPEN)) {
/*
* We failed to open the device, and nobody else had it opened.
* Clean up the state as appropriate.
*/
ucom_cleanup(sc);
}
DPRINTF(("%s: ucomopen: failed\n", USBDEVNAME(sc->sc_dev)));
return (error);
}
Static int
ucomparam(struct tty *tp, struct termios *t)
{
struct ucom_softc *sc;
int error;
usbd_status uerr;
USB_GET_SC(ucom, UCOMUNIT(tp->t_dev), sc);
if (sc->sc_dying)
return (EIO);
DPRINTF(("ucomparam: sc = %p\n", sc));
/* Check requested parameters. */
if (t->c_ospeed < 0) {
DPRINTF(("ucomparam: negative ospeed\n"));
return (EINVAL);
}
if (t->c_ispeed && t->c_ispeed != t->c_ospeed) {
DPRINTF(("ucomparam: mismatch ispeed and ospeed\n"));
return (EINVAL);
}
/*
* If there were no changes, don't do anything. This avoids dropping
* input and improves performance when all we did was frob things like
* VMIN and VTIME.
*/
if (tp->t_ospeed == t->c_ospeed &&
tp->t_cflag == t->c_cflag)
return (0);
/* And copy to tty. */
tp->t_ispeed = 0;
tp->t_ospeed = t->c_ospeed;
tp->t_cflag = t->c_cflag;
if (sc->sc_callback->ucom_param == NULL)
return (0);
ucomstopread(sc);
error = sc->sc_callback->ucom_param(sc->sc_parent, sc->sc_portno, t);
if (error) {
DPRINTF(("ucomparam: callback: error = %d\n", error));
return (error);
}
ttsetwater(tp);
if (t->c_cflag & CRTS_IFLOW) {
sc->sc_state |= UCS_RTS_IFLOW;
} else if (sc->sc_state & UCS_RTS_IFLOW) {
sc->sc_state &= ~UCS_RTS_IFLOW;
(void)ucomctl(sc, UMCR_RTS, DMBIS);
}
disc_optim(tp, t, sc);
uerr = ucomstartread(sc);
if (uerr != USBD_NORMAL_COMPLETION)
return (EIO);
return (0);
}
Static void
ucomreadcb(usbd_xfer_handle xfer, usbd_private_handle p, usbd_status status)
{
struct ucom_softc *sc = (struct ucom_softc *)p;
struct tty *tp = sc->sc_tty;
int (*rint) (int c, struct tty *tp) = linesw[tp->t_line].l_rint;
usbd_status err;
u_int32_t cc;
u_char *cp;
int lostcc;
int s;
DPRINTF(("ucomreadcb: status = %d\n", status));
if (status != USBD_NORMAL_COMPLETION) {
if (!(sc->sc_state & UCS_RXSTOP))
printf("%s: ucomreadcb: %s\n",
USBDEVNAME(sc->sc_dev), usbd_errstr(status));
if (status == USBD_STALLED)
usbd_clear_endpoint_stall_async(sc->sc_bulkin_pipe);
/* XXX we should restart after some delay. */
return;
}
usbd_get_xfer_status(xfer, NULL, (void **)&cp, &cc, NULL);
DPRINTF(("ucomreadcb: got %d chars, tp = %p\n", cc, tp));
if (cc == 0)
goto resubmit;
if (sc->sc_callback->ucom_read != NULL)
sc->sc_callback->ucom_read(sc->sc_parent, sc->sc_portno,
&cp, &cc);
if (cc > sc->sc_ibufsize) {
printf("%s: invalid receive data size, %d chars\n",
USBDEVNAME(sc->sc_dev), cc);
goto resubmit;
}
if (cc < 1)
goto resubmit;
s = spltty();
if (tp->t_state & TS_CAN_BYPASS_L_RINT) {
if (tp->t_rawq.c_cc + cc > tp->t_ihiwat
&& (sc->sc_state & UCS_RTS_IFLOW
|| tp->t_iflag & IXOFF)
&& !(tp->t_state & TS_TBLOCK))
ttyblock(tp);
lostcc = b_to_q((char *)cp, cc, &tp->t_rawq);
tp->t_rawcc += cc;
ttwakeup(tp);
if (tp->t_state & TS_TTSTOP
&& (tp->t_iflag & IXANY
|| tp->t_cc[VSTART] == tp->t_cc[VSTOP])) {
tp->t_state &= ~TS_TTSTOP;
tp->t_lflag &= ~FLUSHO;
ucomstart(tp);
}
if (lostcc > 0)
printf("%s: lost %d chars\n", USBDEVNAME(sc->sc_dev),
lostcc);
} else {
/* Give characters to tty layer. */
while (cc > 0) {
DPRINTFN(7, ("ucomreadcb: char = 0x%02x\n", *cp));
if ((*rint)(*cp, tp) == -1) {
/* XXX what should we do? */
printf("%s: lost %d chars\n",
USBDEVNAME(sc->sc_dev), cc);
break;
}
cc--;
cp++;
}
}
splx(s);
resubmit:
err = ucomstartread(sc);
if (err) {
printf("%s: read start failed\n", USBDEVNAME(sc->sc_dev));
/* XXX what should we dow now? */
}
if ((sc->sc_state & UCS_RTS_IFLOW) && !ISSET(sc->sc_mcr, UMCR_RTS)
&& !(tp->t_state & TS_TBLOCK))
ucomctl(sc, UMCR_RTS, DMBIS);
}
