s32 rtw_update_txdesc(struct xmit_frame *pxmitframe, u32 *pmem, s32 sz)
{
int pull=0;
uint qsel;
_adapter *padapter = pxmitframe->padapter;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
struct tx_desc *ptxdesc = (struct tx_desc *)pmem;
sint bmcst = IS_MCAST(pattrib->ra);
struct ht_priv *phtpriv = &pmlmepriv->htpriv;
struct mlme_ext_info *pmlmeinfo = &padapter->mlmeextpriv.mlmext_info;
if(urb_zero_packet_chk(padapter, sz)==0)
{
ptxdesc = (struct tx_desc *)(pmem+(PACKET_OFFSET_SZ>>2));
pull = 1;
}
static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bagg_pkt)
{
int pull = 0;
uint qsel;
u8 data_rate, pwr_status, offset;
struct adapter *adapt = pxmitframe->padapter;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
struct hal_data_8188e *haldata = GET_HAL_DATA(adapt);
struct tx_desc *ptxdesc = (struct tx_desc *)pmem;
struct mlme_ext_priv *pmlmeext = &adapt->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
int bmcst = IS_MCAST(pattrib->ra);
if (adapt->registrypriv.mp_mode == 0) {
if ((!bagg_pkt) && (urb_zero_packet_chk(adapt, sz) == 0)) {
ptxdesc = (struct tx_desc *)(pmem+PACKET_OFFSET_SZ);
pull = 1;
}
}
memset(ptxdesc, 0, sizeof(struct tx_desc));
/* 4 offset 0 */
ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
ptxdesc->txdw0 |= cpu_to_le32(sz & 0x0000ffff);/* update TXPKTSIZE */
offset = TXDESC_SIZE + OFFSET_SZ;
ptxdesc->txdw0 |= cpu_to_le32(((offset) << OFFSET_SHT) & 0x00ff0000);/* 32 bytes for TX Desc */
if (bmcst)
ptxdesc->txdw0 |= cpu_to_le32(BMC);
if (adapt->registrypriv.mp_mode == 0) {
if (!bagg_pkt) {
if ((pull) && (pxmitframe->pkt_offset > 0))
pxmitframe->pkt_offset = pxmitframe->pkt_offset - 1;
}
}
/* pkt_offset, unit:8 bytes padding */
if (pxmitframe->pkt_offset > 0)
ptxdesc->txdw1 |= cpu_to_le32((pxmitframe->pkt_offset << 26) & 0x7c000000);
/* driver uses rate */
ptxdesc->txdw4 |= cpu_to_le32(USERATE);/* rate control always by driver */
if ((pxmitframe->frame_tag & 0x0f) == DATA_FRAMETAG) {
/* offset 4 */
ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id & 0x3F);
qsel = (uint)(pattrib->qsel & 0x0000001f);
ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00);
ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid << RATE_ID_SHT) & 0x000F0000);
fill_txdesc_sectype(pattrib, ptxdesc);
if (pattrib->ampdu_en) {
ptxdesc->txdw2 |= cpu_to_le32(AGG_EN);/* AGG EN */
ptxdesc->txdw6 = cpu_to_le32(0x6666f800);
} else {
ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);/* AGG BK */
}
/* offset 8 */
/* offset 12 */
ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum << SEQ_SHT) & 0x0FFF0000);
/* offset 16 , offset 20 */
if (pattrib->qos_en)
ptxdesc->txdw4 |= cpu_to_le32(QOS);/* QoS */
/* offset 20 */
if (pxmitframe->agg_num > 1)
ptxdesc->txdw5 |= cpu_to_le32((pxmitframe->agg_num << USB_TXAGG_NUM_SHT) & 0xFF000000);
if ((pattrib->ether_type != 0x888e) &&
(pattrib->ether_type != 0x0806) &&
(pattrib->ether_type != 0x88b4) &&
(pattrib->dhcp_pkt != 1)) {
/* Non EAP & ARP & DHCP type data packet */
fill_txdesc_vcs(pattrib, &ptxdesc->txdw4);
fill_txdesc_phy(pattrib, &ptxdesc->txdw4);
ptxdesc->txdw4 |= cpu_to_le32(0x00000008);/* RTS Rate=24M */
ptxdesc->txdw5 |= cpu_to_le32(0x0001ff00);/* DATA/RTS Rate FB LMT */
if (pattrib->ht_en) {
if (ODM_RA_GetShortGI_8188E(&haldata->odmpriv, pattrib->mac_id))
ptxdesc->txdw5 |= cpu_to_le32(SGI);/* SGI */
}
data_rate = ODM_RA_GetDecisionRate_8188E(&haldata->odmpriv, pattrib->mac_id);
ptxdesc->txdw5 |= cpu_to_le32(data_rate & 0x3F);
pwr_status = ODM_RA_GetHwPwrStatus_8188E(&haldata->odmpriv, pattrib->mac_id);
ptxdesc->txdw4 |= cpu_to_le32((pwr_status & 0x7) << PWR_STATUS_SHT);
} else {
/* EAP data packet and ARP packet and DHCP. */
/* Use the 1M data rate to send the EAP/ARP packet. */
/* This will maybe make the handshake smooth. */
ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);/* AGG BK */
if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT)
ptxdesc->txdw4 |= cpu_to_le32(BIT(24));/* DATA_SHORT */
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
}
} else if ((pxmitframe->frame_tag&0x0f) == MGNT_FRAMETAG) {
/* offset 4 */
ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id & 0x3f);
qsel = (uint)(pattrib->qsel&0x0000001f);
ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00);
ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid << RATE_ID_SHT) & 0x000f0000);
/* offset 8 */
/* CCX-TXRPT ack for xmit mgmt frames. */
if (pxmitframe->ack_report)
ptxdesc->txdw2 |= cpu_to_le32(BIT(19));
/* offset 12 */
ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0FFF0000);
/* offset 20 */
ptxdesc->txdw5 |= cpu_to_le32(RTY_LMT_EN);/* retry limit enable */
if (pattrib->retry_ctrl)
ptxdesc->txdw5 |= cpu_to_le32(0x00180000);/* retry limit = 6 */
else
ptxdesc->txdw5 |= cpu_to_le32(0x00300000);/* retry limit = 12 */
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
} else if ((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG) {
DBG_88E("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
} else {
DBG_88E("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);
/* offset 4 */
ptxdesc->txdw1 |= cpu_to_le32((4) & 0x3f);/* CAM_ID(MAC_ID) */
ptxdesc->txdw1 |= cpu_to_le32((6 << RATE_ID_SHT) & 0x000f0000);/* raid */
/* offset 8 */
/* offset 12 */
ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0fff0000);
/* offset 20 */
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
}
/* 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS. */
/* (1) The sequence number of each non-Qos frame / broadcast / multicast / */
/* mgnt frame should be controlled by Hw because Fw will also send null data */
/* which we cannot control when Fw LPS enable. */
/* --> default enable non-Qos data sequense number. 2010.06.23. by tynli. */
/* (2) Enable HW SEQ control for beacon packet, because we use Hw beacon. */
/* (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets. */
/* 2010.06.23. Added by tynli. */
if (!pattrib->qos_en) {
ptxdesc->txdw3 |= cpu_to_le32(EN_HWSEQ); /* Hw set sequence number */
ptxdesc->txdw4 |= cpu_to_le32(HW_SSN); /* Hw set sequence number */
}
rtl88eu_dm_set_tx_ant_by_tx_info(&haldata->odmpriv, pmem,
pattrib->mac_id);
rtl8188eu_cal_txdesc_chksum(ptxdesc);
_dbg_dump_tx_info(adapt, pxmitframe->frame_tag, ptxdesc);
return pull;
}
static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz, u8 bagg_pkt)
{
int pull=0;
uint qsel;
_adapter *padapter = pxmitframe->padapter;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
struct dm_priv *pdmpriv = &pHalData->dmpriv;
struct tx_desc *ptxdesc = (struct tx_desc *)pmem;
struct ht_priv *phtpriv = &pmlmepriv->htpriv;
struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
sint bmcst = IS_MCAST(pattrib->ra);
#ifdef CONFIG_P2P
struct wifidirect_info* pwdinfo = &padapter->wdinfo;
#endif //CONFIG_P2P
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
if((_FALSE == bagg_pkt) && (urb_zero_packet_chk(padapter, sz)==0))
{
ptxdesc = (struct tx_desc *)(pmem+PACKET_OFFSET_SZ);
pull = 1;
pxmitframe->pkt_offset --;
}
#endif // CONFIG_USE_USB_BUFFER_ALLOC_TX
_rtw_memset(ptxdesc, 0, sizeof(struct tx_desc));
if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
{
//DBG_8192C("pxmitframe->frame_tag == DATA_FRAMETAG\n");
//offset 4
ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x1f);
qsel = (uint)(pattrib->qsel & 0x0000001f);
ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00);
ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid<< 16) & 0x000f0000);
fill_txdesc_sectype(pattrib, ptxdesc);
if(pattrib->ampdu_en==_TRUE)
ptxdesc->txdw1 |= cpu_to_le32(BIT(5));//AGG EN
else
ptxdesc->txdw1 |= cpu_to_le32(BIT(6));//AGG BK
//offset 8
//offset 12
ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<16)&0xffff0000);
//offset 16 , offset 20
if (pattrib->qos_en)
ptxdesc->txdw4 |= cpu_to_le32(BIT(6));//QoS
if ((pattrib->ether_type != 0x888e) && (pattrib->ether_type != 0x0806) && (pattrib->dhcp_pkt != 1))
{
//Non EAP & ARP & DHCP type data packet
fill_txdesc_vcs(pattrib, &ptxdesc->txdw4);
fill_txdesc_phy(pattrib, &ptxdesc->txdw4);
ptxdesc->txdw4 |= cpu_to_le32(0x00000008);//RTS Rate=24M
ptxdesc->txdw5 |= cpu_to_le32(0x0001ff00);//
//ptxdesc->txdw5 |= cpu_to_le32(0x0000000b);//DataRate - 54M
//use REG_INIDATA_RATE_SEL value
ptxdesc->txdw5 |= cpu_to_le32(pdmpriv->INIDATA_RATE[pattrib->mac_id]);
if(0)//for driver dbg
{
ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
if(pattrib->ht_en)
ptxdesc->txdw5 |= cpu_to_le32(BIT(6));//SGI
ptxdesc->txdw5 |= cpu_to_le32(0x00000013);//init rate - mcs7
}
}
else
{
// EAP data packet and ARP packet.
// Use the 1M data rate to send the EAP/ARP packet.
// This will maybe make the handshake smooth.
ptxdesc->txdw1 |= cpu_to_le32(BIT(6));//AGG BK
ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT)
ptxdesc->txdw4 |= cpu_to_le32(BIT(24));// DATA_SHORT
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
}
//offset 24
#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
if ( pattrib->hw_tcp_csum == 1 ) {
// ptxdesc->txdw6 = 0; // clear TCP_CHECKSUM and IP_CHECKSUM. It's zero already!!
u8 ip_hdr_offset = 32 + pattrib->hdrlen + pattrib->iv_len + 8;
ptxdesc->txdw7 = (1 << 31) | (ip_hdr_offset << 16);
DBG_8192C("ptxdesc->txdw7 = %08x\n", ptxdesc->txdw7);
}
#endif
}
else if((pxmitframe->frame_tag&0x0f)== MGNT_FRAMETAG)
{
//DBG_8192C("pxmitframe->frame_tag == MGNT_FRAMETAG\n");
//offset 4
ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x1f);
qsel = (uint)(pattrib->qsel&0x0000001f);
ptxdesc->txdw1 |= cpu_to_le32((qsel<<QSEL_SHT)&0x00001f00);
ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid<< 16) & 0x000f0000);
//fill_txdesc_sectype(pattrib, ptxdesc);
//offset 8
#ifdef CONFIG_XMIT_ACK
//CCX-TXRPT ack for xmit mgmt frames.
if (pxmitframe->ack_report) {
ptxdesc->txdw2 |= cpu_to_le32(BIT(19));
#ifdef DBG_CCX
DBG_871X("%s set ccx\n", __func__);
#endif
}
#endif //CONFIG_XMIT_ACK
//offset 12
ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<16)&0xffff0000);
//offset 16
ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
//offset 20
ptxdesc->txdw5 |= cpu_to_le32(BIT(17));//retry limit enable
if(pattrib->retry_ctrl == _TRUE)
{
#ifdef CONFIG_P2P
if(!rtw_p2p_chk_state(pwdinfo, P2P_STATE_NONE))
{
ptxdesc->txdw5 |= cpu_to_le32(0x00080000);//retry limit = 2
}
else
#endif //CONFIG_P2P
ptxdesc->txdw5 |= cpu_to_le32(0x00180000);//retry limit = 6
}
else
ptxdesc->txdw5 |= cpu_to_le32(0x00300000);//retry limit = 12
#ifdef CONFIG_INTEL_PROXIM
if((padapter->proximity.proxim_on==_TRUE)&&(pattrib->intel_proxim==_TRUE)){
printk("\n %s pattrib->rate=%d\n",__FUNCTION__,pattrib->rate);
ptxdesc->txdw5 |= cpu_to_le32( pattrib->rate);
}
else
#endif
{
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
}
}
else if((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG)
{
DBG_8192C("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
}
#ifdef CONFIG_MP_INCLUDED
else if((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG)
{
fill_txdesc_for_mp(padapter, ptxdesc);
}
#endif
else
{
DBG_8192C("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);
//offset 4
ptxdesc->txdw1 |= cpu_to_le32((4)&0x1f);//CAM_ID(MAC_ID)
ptxdesc->txdw1 |= cpu_to_le32((6<< 16) & 0x000f0000);//raid
//offset 8
//offset 12
ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<16)&0xffff0000);
//offset 16
ptxdesc->txdw4 |= cpu_to_le32(BIT(8));//driver uses rate
//offset 20
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
}
// 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS.
// (1) The sequence number of each non-Qos frame / broadcast / multicast /
// mgnt frame should be controled by Hw because Fw will also send null data
// which we cannot control when Fw LPS enable.
// --> default enable non-Qos data sequense number. 2010.06.23. by tynli.
// (2) Enable HW SEQ control for beacon packet, because we use Hw beacon.
// (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets.
// 2010.06.23. Added by tynli.
if(!pattrib->qos_en)
{
ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number
ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29.
}
//offset 0
ptxdesc->txdw0 |= cpu_to_le32(sz&0x0000ffff);
ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
ptxdesc->txdw0 |= cpu_to_le32(((TXDESC_SIZE+OFFSET_SZ)<<OFFSET_SHT)&0x00ff0000);//32 bytes for TX Desc
if(bmcst)
{
ptxdesc->txdw0 |= cpu_to_le32(BIT(24));
}
RT_TRACE(_module_rtl871x_xmit_c_,_drv_info_,("offset0-txdesc=0x%x\n", ptxdesc->txdw0));
//offset 4
// pkt_offset, unit:8 bytes padding
if (pxmitframe->pkt_offset > 0)
ptxdesc->txdw1 |= cpu_to_le32((pxmitframe->pkt_offset << 26) & 0x7c000000);
#ifdef CONFIG_USB_TX_AGGREGATION
if (pxmitframe->agg_num > 1)
ptxdesc->txdw5 |= cpu_to_le32((pxmitframe->agg_num << 24) & 0xff000000);
#endif
rtl8192cu_cal_txdesc_chksum(ptxdesc);
return pull;
}
static s32 update_txdesc(struct xmit_frame *pxmitframe, u8 *pmem, s32 sz ,u8 bagg_pkt)
{
int pull=0;
uint qsel;
u8 data_rate,pwr_status,offset;
_adapter *padapter = pxmitframe->padapter;
struct mlme_priv *pmlmepriv = &padapter->mlmepriv;
struct pkt_attrib *pattrib = &pxmitframe->attrib;
HAL_DATA_TYPE *pHalData = GET_HAL_DATA(padapter);
//struct dm_priv *pdmpriv = &pHalData->dmpriv;
struct tx_desc *ptxdesc = (struct tx_desc *)pmem;
struct mlme_ext_priv *pmlmeext = &padapter->mlmeextpriv;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
sint bmcst = IS_MCAST(pattrib->ra);
#ifdef CONFIG_P2P
struct wifidirect_info* pwdinfo = &padapter->wdinfo;
#endif //CONFIG_P2P
#ifdef CONFIG_CONCURRENT_MODE
if(rtw_buddy_adapter_up(padapter) && padapter->adapter_type > PRIMARY_ADAPTER)
pHalData = GET_HAL_DATA(padapter->pbuddy_adapter);
#endif //CONFIG_CONCURRENT_MODE
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
if (padapter->registrypriv.mp_mode == 0)
{
if((!bagg_pkt) &&(urb_zero_packet_chk(padapter, sz)==0))//(sz %512) != 0
//if((!bagg_pkt) &&(rtw_usb_bulk_size_boundary(padapter,TXDESC_SIZE+sz)==_FALSE))
{
ptxdesc = (struct tx_desc *)(pmem+PACKET_OFFSET_SZ);
//DBG_8192C("==> non-agg-pkt,shift pointer...\n");
pull = 1;
}
}
#endif // CONFIG_USE_USB_BUFFER_ALLOC_TX
_rtw_memset(ptxdesc, 0, sizeof(struct tx_desc));
//4 offset 0
ptxdesc->txdw0 |= cpu_to_le32(OWN | FSG | LSG);
//DBG_8192C("%s==> pkt_len=%d,bagg_pkt=%02x\n",__FUNCTION__,sz,bagg_pkt);
ptxdesc->txdw0 |= cpu_to_le32(sz & 0x0000ffff);//update TXPKTSIZE
offset = TXDESC_SIZE + OFFSET_SZ;
#ifdef CONFIG_TX_EARLY_MODE
if(bagg_pkt){
offset += EARLY_MODE_INFO_SIZE ;//0x28
}
#endif
//DBG_8192C("%s==>offset(0x%02x) \n",__FUNCTION__,offset);
ptxdesc->txdw0 |= cpu_to_le32(((offset) << OFFSET_SHT) & 0x00ff0000);//32 bytes for TX Desc
if (bmcst) ptxdesc->txdw0 |= cpu_to_le32(BMC);
#ifndef CONFIG_USE_USB_BUFFER_ALLOC_TX
if (padapter->registrypriv.mp_mode == 0)
{
if(!bagg_pkt){
if((pull) && (pxmitframe->pkt_offset>0)) {
pxmitframe->pkt_offset = pxmitframe->pkt_offset -1;
}
}
}
#endif
//DBG_8192C("%s, pkt_offset=0x%02x\n",__FUNCTION__,pxmitframe->pkt_offset);
// pkt_offset, unit:8 bytes padding
if (pxmitframe->pkt_offset > 0)
ptxdesc->txdw1 |= cpu_to_le32((pxmitframe->pkt_offset << 26) & 0x7c000000);
//driver uses rate
ptxdesc->txdw4 |= cpu_to_le32(USERATE);//rate control always by driver
if((pxmitframe->frame_tag&0x0f) == DATA_FRAMETAG)
{
//DBG_8192C("pxmitframe->frame_tag == DATA_FRAMETAG\n");
//offset 4
ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x3F);
qsel = (uint)(pattrib->qsel & 0x0000001f);
//DBG_8192C("==> macid(%d) qsel:0x%02x \n",pattrib->mac_id,qsel);
ptxdesc->txdw1 |= cpu_to_le32((qsel << QSEL_SHT) & 0x00001f00);
ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid<< RATE_ID_SHT) & 0x000F0000);
fill_txdesc_sectype(pattrib, ptxdesc);
if(pattrib->ampdu_en==_TRUE){
ptxdesc->txdw2 |= cpu_to_le32(AGG_EN);//AGG EN
//SET_TX_DESC_MAX_AGG_NUM_88E(pDesc, 0x1F);
//SET_TX_DESC_MCSG1_MAX_LEN_88E(pDesc, 0x6);
//SET_TX_DESC_MCSG2_MAX_LEN_88E(pDesc, 0x6);
//SET_TX_DESC_MCSG3_MAX_LEN_88E(pDesc, 0x6);
//SET_TX_DESC_MCS7_SGI_MAX_LEN_88E(pDesc, 0x6);
ptxdesc->txdw6 = 0x6666f800;
}
else{
ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);//AGG BK
}
//offset 8
//offset 12
ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<< SEQ_SHT)&0x0FFF0000);
//offset 16 , offset 20
if (pattrib->qos_en)
ptxdesc->txdw4 |= cpu_to_le32(QOS);//QoS
//offset 20
#ifdef CONFIG_USB_TX_AGGREGATION
if (pxmitframe->agg_num > 1){
//DBG_8192C("%s agg_num:%d\n",__FUNCTION__,pxmitframe->agg_num );
ptxdesc->txdw5 |= cpu_to_le32((pxmitframe->agg_num << USB_TXAGG_NUM_SHT) & 0xFF000000);
}
#endif
if ((pattrib->ether_type != 0x888e) &&
(pattrib->ether_type != 0x0806) &&
(pattrib->ether_type != 0x88b4) &&
(pattrib->dhcp_pkt != 1))
{
//Non EAP & ARP & DHCP type data packet
fill_txdesc_vcs(pattrib, &ptxdesc->txdw4);
fill_txdesc_phy(pattrib, &ptxdesc->txdw4);
ptxdesc->txdw4 |= cpu_to_le32(0x00000008);//RTS Rate=24M
ptxdesc->txdw5 |= cpu_to_le32(0x0001ff00);//DATA/RTS Rate FB LMT
#if (RATE_ADAPTIVE_SUPPORT == 1)
if(pattrib->ht_en){
if( ODM_RA_GetShortGI_8188E(&pHalData->odmpriv,pattrib->mac_id))
ptxdesc->txdw5 |= cpu_to_le32(SGI);//SGI
}
data_rate =ODM_RA_GetDecisionRate_8188E(&pHalData->odmpriv,pattrib->mac_id);
ptxdesc->txdw5 |= cpu_to_le32(data_rate & 0x3F);
//for debug
#if 0
if(padapter->fix_rate!= 0xFF){
ptxdesc->datarate = padapter->fix_rate;
}
#endif
#if (POWER_TRAINING_ACTIVE==1)
pwr_status = ODM_RA_GetHwPwrStatus_8188E(&pHalData->odmpriv,pattrib->mac_id);
ptxdesc->txdw4 |=cpu_to_le32( (pwr_status & 0x7)<< PWR_STATUS_SHT);
#endif //(POWER_TRAINING_ACTIVE==1)
#else//if (RATE_ADAPTIVE_SUPPORT == 1)
if(pattrib->ht_en)
ptxdesc->txdw5 |= cpu_to_le32(SGI);//SGI
data_rate = 0x13; //default rate: MCS7
if(padapter->fix_rate!= 0xFF){//rate control by iwpriv
data_rate = padapter->fix_rate;
}
ptxdesc->txdw5 |= cpu_to_le32(data_rate & 0x3F);
#endif//if (RATE_ADAPTIVE_SUPPORT == 1)
}
else
{
// EAP data packet and ARP packet and DHCP.
// Use the 1M data rate to send the EAP/ARP packet.
// This will maybe make the handshake smooth.
ptxdesc->txdw2 |= cpu_to_le32(AGG_BK);//AGG BK
if (pmlmeinfo->preamble_mode == PREAMBLE_SHORT)
ptxdesc->txdw4 |= cpu_to_le32(BIT(24));// DATA_SHORT
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
}
#ifdef CONFIG_TCP_CSUM_OFFLOAD_TX
//offset 24
if ( pattrib->hw_tcp_csum == 1 ) {
// ptxdesc->txdw6 = 0; // clear TCP_CHECKSUM and IP_CHECKSUM. It's zero already!!
u8 ip_hdr_offset = 32 + pattrib->hdrlen + pattrib->iv_len + 8;
ptxdesc->txdw7 = (1 << 31) | (ip_hdr_offset << 16);
DBG_8192C("ptxdesc->txdw7 = %08x\n", ptxdesc->txdw7);
}
#endif
}
else if((pxmitframe->frame_tag&0x0f)== MGNT_FRAMETAG)
{
//DBG_8192C("pxmitframe->frame_tag == MGNT_FRAMETAG\n");
//offset 4
ptxdesc->txdw1 |= cpu_to_le32(pattrib->mac_id&0x3f);
qsel = (uint)(pattrib->qsel&0x0000001f);
ptxdesc->txdw1 |= cpu_to_le32((qsel<<QSEL_SHT)&0x00001f00);
ptxdesc->txdw1 |= cpu_to_le32((pattrib->raid<< RATE_ID_SHT) & 0x000f0000);
//fill_txdesc_sectype(pattrib, ptxdesc);
//offset 8
#ifdef CONFIG_XMIT_ACK
//CCX-TXRPT ack for xmit mgmt frames.
if (pxmitframe->ack_report) {
#ifdef DBG_CCX
static u16 ccx_sw = 0x123;
ptxdesc->txdw7 |= cpu_to_le32(((ccx_sw)<<16)&0x0fff0000);
DBG_871X("%s set ccx, sw:0x%03x\n", __func__, ccx_sw);
ccx_sw = (ccx_sw+1)%0xfff;
#endif
ptxdesc->txdw2 |= cpu_to_le32(BIT(19));
}
#endif //CONFIG_XMIT_ACK
//offset 12
ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0FFF0000);
//offset 20
ptxdesc->txdw5 |= cpu_to_le32(RTY_LMT_EN);//retry limit enable
if(pattrib->retry_ctrl == _TRUE)
ptxdesc->txdw5 |= cpu_to_le32(0x00180000);//retry limit = 6
else
ptxdesc->txdw5 |= cpu_to_le32(0x00300000);//retry limit = 12
#ifdef CONFIG_INTEL_PROXIM
if((padapter->proximity.proxim_on==_TRUE)&&(pattrib->intel_proxim==_TRUE)){
DBG_871X("\n %s pattrib->rate=%d\n",__FUNCTION__,pattrib->rate);
ptxdesc->txdw5 |= cpu_to_le32( pattrib->rate);
}
else
#endif
{
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
}
}
else if((pxmitframe->frame_tag&0x0f) == TXAGG_FRAMETAG)
{
DBG_8192C("pxmitframe->frame_tag == TXAGG_FRAMETAG\n");
}
#ifdef CONFIG_MP_INCLUDED
else if(((pxmitframe->frame_tag&0x0f) == MP_FRAMETAG) &&
(padapter->registrypriv.mp_mode == 1))
{
fill_txdesc_for_mp(padapter, ptxdesc);
}
#endif
else
{
DBG_8192C("pxmitframe->frame_tag = %d\n", pxmitframe->frame_tag);
//offset 4
ptxdesc->txdw1 |= cpu_to_le32((4)&0x3f);//CAM_ID(MAC_ID)
ptxdesc->txdw1 |= cpu_to_le32((6<< RATE_ID_SHT) & 0x000f0000);//raid
//offset 8
//offset 12
ptxdesc->txdw3 |= cpu_to_le32((pattrib->seqnum<<SEQ_SHT)&0x0fff0000);
//offset 20
ptxdesc->txdw5 |= cpu_to_le32(MRateToHwRate(pmlmeext->tx_rate));
}
// 2009.11.05. tynli_test. Suggested by SD4 Filen for FW LPS.
// (1) The sequence number of each non-Qos frame / broadcast / multicast /
// mgnt frame should be controled by Hw because Fw will also send null data
// which we cannot control when Fw LPS enable.
// --> default enable non-Qos data sequense number. 2010.06.23. by tynli.
// (2) Enable HW SEQ control for beacon packet, because we use Hw beacon.
// (3) Use HW Qos SEQ to control the seq num of Ext port non-Qos packets.
// 2010.06.23. Added by tynli.
if(!pattrib->qos_en)
{
//ptxdesc->txdw4 |= cpu_to_le32(BIT(7)); // Hw set sequence number
//ptxdesc->txdw3 |= cpu_to_le32((8 <<28)); //set bit3 to 1. Suugested by TimChen. 2009.12.29.
ptxdesc->txdw3 |= cpu_to_le32(EN_HWSEQ); // Hw set sequence number
ptxdesc->txdw4 |= cpu_to_le32(HW_SSN); // Hw set sequence number
}
#ifdef CONFIG_HW_ANTENNA_DIVERSITY //CONFIG_ANTENNA_DIVERSITY
ODM_SetTxAntByTxInfo_88E(&pHalData->odmpriv, pmem, pattrib->mac_id);
#endif
rtl8188eu_cal_txdesc_chksum(ptxdesc);
_dbg_dump_tx_info(padapter,pxmitframe->frame_tag,ptxdesc);
return pull;
}
