static void realview_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model,
enum realview_board_type board_type)
{
CPUState *env = NULL;
ram_addr_t ram_offset;
DeviceState *dev, *sysctl, *gpio2;
SysBusDevice *busdev;
qemu_irq *irqp;
qemu_irq pic[64];
qemu_irq mmc_irq[2];
PCIBus *pci_bus;
NICInfo *nd;
i2c_bus *i2c;
int n;
int done_nic = 0;
qemu_irq cpu_irq[4];
int is_mpcore = 0;
int is_pb = 0;
uint32_t proc_id = 0;
uint32_t sys_id;
ram_addr_t low_ram_size;
switch (board_type) {
case BOARD_EB:
break;
case BOARD_EB_MPCORE:
is_mpcore = 1;
break;
case BOARD_PB_A8:
is_pb = 1;
break;
case BOARD_PBX_A9:
is_mpcore = 1;
is_pb = 1;
break;
}
for (n = 0; n < smp_cpus; n++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(env);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
}
if (arm_feature(env, ARM_FEATURE_V7)) {
if (is_mpcore) {
proc_id = 0x0c000000;
} else {
proc_id = 0x0e000000;
}
} else if (arm_feature(env, ARM_FEATURE_V6K)) {
proc_id = 0x06000000;
} else if (arm_feature(env, ARM_FEATURE_V6)) {
proc_id = 0x04000000;
} else {
proc_id = 0x02000000;
}
if (is_pb && ram_size > 0x20000000) {
/* Core tile RAM. */
low_ram_size = ram_size - 0x20000000;
ram_size = 0x20000000;
ram_offset = qemu_ram_alloc(NULL, "realview.lowmem", low_ram_size);
cpu_register_physical_memory(0x20000000, low_ram_size,
ram_offset | IO_MEM_RAM);
}
ram_offset = qemu_ram_alloc(NULL, "realview.highmem", ram_size);
low_ram_size = ram_size;
if (low_ram_size > 0x10000000)
low_ram_size = 0x10000000;
/* SDRAM at address zero. */
cpu_register_physical_memory(0, low_ram_size, ram_offset | IO_MEM_RAM);
if (is_pb) {
/* And again at a high address. */
cpu_register_physical_memory(0x70000000, ram_size,
ram_offset | IO_MEM_RAM);
} else {
ram_size = low_ram_size;
}
sys_id = is_pb ? 0x01780500 : 0xc1400400;
sysctl = qdev_create(NULL, "realview_sysctl");
qdev_prop_set_uint32(sysctl, "sys_id", sys_id);
qdev_init_nofail(sysctl);
qdev_prop_set_uint32(sysctl, "proc_id", proc_id);
sysbus_mmio_map(sysbus_from_qdev(sysctl), 0, 0x10000000);
if (is_mpcore) {
dev = qdev_create(NULL, is_pb ? "a9mpcore_priv": "realview_mpcore");
qdev_prop_set_uint32(dev, "num-cpu", smp_cpus);
qdev_init_nofail(dev);
busdev = sysbus_from_qdev(dev);
if (is_pb) {
realview_binfo.smp_priv_base = 0x1f000000;
} else {
realview_binfo.smp_priv_base = 0x10100000;
}
sysbus_mmio_map(busdev, 0, realview_binfo.smp_priv_base);
for (n = 0; n < smp_cpus; n++) {
sysbus_connect_irq(busdev, n, cpu_irq[n]);
}
} else {
uint32_t gic_addr = is_pb ? 0x1e000000 : 0x10040000;
/* For now just create the nIRQ GIC, and ignore the others. */
dev = sysbus_create_simple("realview_gic", gic_addr, cpu_irq[0]);
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_gpio_in(dev, n);
}
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
sysbus_create_simple("pl011", 0x10009000, pic[12]);
sysbus_create_simple("pl011", 0x1000a000, pic[13]);
sysbus_create_simple("pl011", 0x1000b000, pic[14]);
sysbus_create_simple("pl011", 0x1000c000, pic[15]);
/* DMA controller is optional, apparently. */
sysbus_create_simple("pl081", 0x10030000, pic[24]);
sysbus_create_simple("sp804", 0x10011000, pic[4]);
sysbus_create_simple("sp804", 0x10012000, pic[5]);
sysbus_create_simple("pl061", 0x10013000, pic[6]);
sysbus_create_simple("pl061", 0x10014000, pic[7]);
gpio2 = sysbus_create_simple("pl061", 0x10015000, pic[8]);
sysbus_create_simple("pl110_versatile", 0x10020000, pic[23]);
dev = sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
/* Wire up MMC card detect and read-only signals. These have
* to go to both the PL061 GPIO and the sysctl register.
* Note that the PL181 orders these lines (readonly,inserted)
* and the PL061 has them the other way about. Also the card
* detect line is inverted.
*/
mmc_irq[0] = qemu_irq_split(
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_WPROT),
qdev_get_gpio_in(gpio2, 1));
mmc_irq[1] = qemu_irq_split(
qdev_get_gpio_in(sysctl, ARM_SYSCTL_GPIO_MMC_CARDIN),
qemu_irq_invert(qdev_get_gpio_in(gpio2, 0)));
qdev_connect_gpio_out(dev, 0, mmc_irq[0]);
qdev_connect_gpio_out(dev, 1, mmc_irq[1]);
sysbus_create_simple("pl031", 0x10017000, pic[10]);
if (!is_pb) {
dev = sysbus_create_varargs("realview_pci", 0x60000000,
pic[48], pic[49], pic[50], pic[51], NULL);
pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci");
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, -1);
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
n--;
}
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if (!done_nic && (!nd->model ||
strcmp(nd->model, is_pb ? "lan9118" : "smc91c111") == 0)) {
if (is_pb) {
lan9118_init(nd, 0x4e000000, pic[28]);
} else {
smc91c111_init(nd, 0x4e000000, pic[28]);
}
done_nic = 1;
} else {
pci_nic_init_nofail(nd, "rtl8139", NULL);
}
}
dev = sysbus_create_simple("realview_i2c", 0x10002000, NULL);
i2c = (i2c_bus *)qdev_get_child_bus(dev, "i2c");
i2c_create_slave(i2c, "ds1338", 0x68);
/* Memory map for RealView Emulation Baseboard: */
/* 0x10000000 System registers. */
/* 0x10001000 System controller. */
/* 0x10002000 Two-Wire Serial Bus. */
/* 0x10003000 Reserved. */
/* 0x10004000 AACI. */
/* 0x10005000 MCI. */
/* 0x10006000 KMI0. */
/* 0x10007000 KMI1. */
/* 0x10008000 Character LCD. (EB) */
/* 0x10009000 UART0. */
/* 0x1000a000 UART1. */
/* 0x1000b000 UART2. */
/* 0x1000c000 UART3. */
/* 0x1000d000 SSPI. */
/* 0x1000e000 SCI. */
/* 0x1000f000 Reserved. */
/* 0x10010000 Watchdog. */
/* 0x10011000 Timer 0+1. */
/* 0x10012000 Timer 2+3. */
/* 0x10013000 GPIO 0. */
/* 0x10014000 GPIO 1. */
/* 0x10015000 GPIO 2. */
/* 0x10002000 Two-Wire Serial Bus - DVI. (PB) */
/* 0x10017000 RTC. */
/* 0x10018000 DMC. */
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
/* 0x10040000 GIC1. (EB) */
/* 0x10050000 GIC2. (EB) */
/* 0x10060000 GIC3. (EB) */
/* 0x10070000 GIC4. (EB) */
/* 0x10080000 SMC. */
/* 0x1e000000 GIC1. (PB) */
/* 0x1e001000 GIC2. (PB) */
/* 0x1e002000 GIC3. (PB) */
/* 0x1e003000 GIC4. (PB) */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x48000000 SRAM. */
/* 0x4c000000 Configuration flash. */
/* 0x4e000000 Ethernet. */
/* 0x4f000000 USB. */
/* 0x50000000 PISMO. */
/* 0x54000000 PISMO. */
/* 0x58000000 PISMO. */
/* 0x5c000000 PISMO. */
/* 0x60000000 PCI. */
/* 0x61000000 PCI Self Config. */
/* 0x62000000 PCI Config. */
/* 0x63000000 PCI IO. */
/* 0x64000000 PCI mem 0. */
/* 0x68000000 PCI mem 1. */
/* 0x6c000000 PCI mem 2. */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
ram_offset = qemu_ram_alloc(NULL, "realview.hack", 0x1000);
cpu_register_physical_memory(SMP_BOOT_ADDR, 0x1000,
ram_offset | IO_MEM_RAM);
realview_binfo.ram_size = ram_size;
realview_binfo.kernel_filename = kernel_filename;
realview_binfo.kernel_cmdline = kernel_cmdline;
realview_binfo.initrd_filename = initrd_filename;
realview_binfo.nb_cpus = smp_cpus;
realview_binfo.board_id = realview_board_id[board_type];
realview_binfo.loader_start = (board_type == BOARD_PB_A8 ? 0x70000000 : 0);
arm_load_kernel(first_cpu, &realview_binfo);
}
static void realview_init(ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename, const char *kernel_cmdline,
const char *initrd_filename, const char *cpu_model)
{
CPUState *env;
ram_addr_t ram_offset;
DeviceState *dev;
qemu_irq *irqp;
qemu_irq pic[64];
PCIBus *pci_bus;
NICInfo *nd;
int n;
int done_smc = 0;
qemu_irq cpu_irq[4];
int ncpu;
if (!cpu_model)
cpu_model = "arm926";
/* FIXME: obey smp_cpus. */
if (strcmp(cpu_model, "arm11mpcore") == 0) {
ncpu = 4;
} else {
ncpu = 1;
}
for (n = 0; n < ncpu; n++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find CPU definition\n");
exit(1);
}
irqp = arm_pic_init_cpu(env);
cpu_irq[n] = irqp[ARM_PIC_CPU_IRQ];
if (n > 0) {
/* Set entry point for secondary CPUs. This assumes we're using
the init code from arm_boot.c. Real hardware resets all CPUs
the same. */
env->regs[15] = 0x80000000;
}
}
ram_offset = qemu_ram_alloc(ram_size);
/* ??? RAM should repeat to fill physical memory space. */
/* SDRAM at address zero. */
cpu_register_physical_memory(0, ram_size, ram_offset | IO_MEM_RAM);
arm_sysctl_init(0x10000000, 0xc1400400);
if (ncpu == 1) {
/* ??? The documentation says GIC1 is nFIQ and either GIC2 or GIC3
is nIRQ (there are inconsistencies). However Linux 2.6.17 expects
GIC1 to be nIRQ and ignores all the others, so do that for now. */
dev = sysbus_create_simple("realview_gic", 0x10040000, cpu_irq[0]);
} else {
dev = sysbus_create_varargs("realview_mpcore", -1,
cpu_irq[0], cpu_irq[1], cpu_irq[2],
cpu_irq[3], NULL);
}
for (n = 0; n < 64; n++) {
pic[n] = qdev_get_irq_sink(dev, n);
}
sysbus_create_simple("pl050_keyboard", 0x10006000, pic[20]);
sysbus_create_simple("pl050_mouse", 0x10007000, pic[21]);
sysbus_create_simple("pl011", 0x10009000, pic[12]);
sysbus_create_simple("pl011", 0x1000a000, pic[13]);
sysbus_create_simple("pl011", 0x1000b000, pic[14]);
sysbus_create_simple("pl011", 0x1000c000, pic[15]);
/* DMA controller is optional, apparently. */
sysbus_create_simple("pl081", 0x10030000, pic[24]);
sysbus_create_simple("sp804", 0x10011000, pic[4]);
sysbus_create_simple("sp804", 0x10012000, pic[5]);
sysbus_create_simple("pl110_versatile", 0x10020000, pic[23]);
sysbus_create_varargs("pl181", 0x10005000, pic[17], pic[18], NULL);
sysbus_create_simple("pl031", 0x10017000, pic[10]);
dev = sysbus_create_varargs("realview_pci", 0x60000000,
pic[48], pic[49], pic[50], pic[51], NULL);
pci_bus = qdev_get_child_bus(dev, "pci");
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, 3, -1);
}
n = drive_get_max_bus(IF_SCSI);
while (n >= 0) {
pci_create_simple(pci_bus, -1, "lsi53c895a");
n--;
}
for(n = 0; n < nb_nics; n++) {
nd = &nd_table[n];
if ((!nd->model && !done_smc) || strcmp(nd->model, "smc91c111") == 0) {
smc91c111_init(nd, 0x4e000000, pic[28]);
done_smc = 1;
} else {
pci_nic_init(pci_bus, nd, -1, "rtl8139");
}
}
/* Memory map for RealView Emulation Baseboard: */
/* 0x10000000 System registers. */
/* 0x10001000 System controller. */
/* 0x10002000 Two-Wire Serial Bus. */
/* 0x10003000 Reserved. */
/* 0x10004000 AACI. */
/* 0x10005000 MCI. */
/* 0x10006000 KMI0. */
/* 0x10007000 KMI1. */
/* 0x10008000 Character LCD. */
/* 0x10009000 UART0. */
/* 0x1000a000 UART1. */
/* 0x1000b000 UART2. */
/* 0x1000c000 UART3. */
/* 0x1000d000 SSPI. */
/* 0x1000e000 SCI. */
/* 0x1000f000 Reserved. */
/* 0x10010000 Watchdog. */
/* 0x10011000 Timer 0+1. */
/* 0x10012000 Timer 2+3. */
/* 0x10013000 GPIO 0. */
/* 0x10014000 GPIO 1. */
/* 0x10015000 GPIO 2. */
/* 0x10016000 Reserved. */
/* 0x10017000 RTC. */
/* 0x10018000 DMC. */
/* 0x10019000 PCI controller config. */
/* 0x10020000 CLCD. */
/* 0x10030000 DMA Controller. */
/* 0x10040000 GIC1. */
/* 0x10050000 GIC2. */
/* 0x10060000 GIC3. */
/* 0x10070000 GIC4. */
/* 0x10080000 SMC. */
/* 0x40000000 NOR flash. */
/* 0x44000000 DoC flash. */
/* 0x48000000 SRAM. */
/* 0x4c000000 Configuration flash. */
/* 0x4e000000 Ethernet. */
/* 0x4f000000 USB. */
/* 0x50000000 PISMO. */
/* 0x54000000 PISMO. */
/* 0x58000000 PISMO. */
/* 0x5c000000 PISMO. */
/* 0x60000000 PCI. */
/* 0x61000000 PCI Self Config. */
/* 0x62000000 PCI Config. */
/* 0x63000000 PCI IO. */
/* 0x64000000 PCI mem 0. */
/* 0x68000000 PCI mem 1. */
/* 0x6c000000 PCI mem 2. */
/* ??? Hack to map an additional page of ram for the secondary CPU
startup code. I guess this works on real hardware because the
BootROM happens to be in ROM/flash or in memory that isn't clobbered
until after Linux boots the secondary CPUs. */
ram_offset = qemu_ram_alloc(0x1000);
cpu_register_physical_memory(0x80000000, 0x1000, ram_offset | IO_MEM_RAM);
realview_binfo.ram_size = ram_size;
realview_binfo.kernel_filename = kernel_filename;
realview_binfo.kernel_cmdline = kernel_cmdline;
realview_binfo.initrd_filename = initrd_filename;
realview_binfo.nb_cpus = ncpu;
arm_load_kernel(first_cpu, &realview_binfo);
}
static void ppc_heathrow_init (ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
MemoryRegion *sysmem = get_system_memory();
CPUState *env = NULL;
char *filename;
qemu_irq *pic, **heathrow_irqs;
int linux_boot, i;
MemoryRegion *ram = g_new(MemoryRegion, 1);
MemoryRegion *bios = g_new(MemoryRegion, 1);
uint32_t kernel_base, initrd_base, cmdline_base = 0;
int32_t kernel_size, initrd_size;
PCIBus *pci_bus;
MacIONVRAMState *nvr;
int bios_size;
MemoryRegion *pic_mem, *dbdma_mem, *cuda_mem;
MemoryRegion *escc_mem, *escc_bar = g_new(MemoryRegion, 1), *ide_mem[2];
uint16_t ppc_boot_device;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
void *fw_cfg;
void *dbdma;
linux_boot = (kernel_filename != NULL);
/* init CPUs */
if (cpu_model == NULL)
cpu_model = "G3";
for (i = 0; i < smp_cpus; i++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find PowerPC CPU definition\n");
exit(1);
}
/* Set time-base frequency to 16.6 Mhz */
cpu_ppc_tb_init(env, 16600000UL);
qemu_register_reset((QEMUResetHandler*)&cpu_reset, env);
}
/* allocate RAM */
if (ram_size > (2047 << 20)) {
fprintf(stderr,
"qemu: Too much memory for this machine: %d MB, maximum 2047 MB\n",
((unsigned int)ram_size / (1 << 20)));
exit(1);
}
memory_region_init_ram(ram, "ppc_heathrow.ram", ram_size);
vmstate_register_ram_global(ram);
memory_region_add_subregion(sysmem, 0, ram);
/* allocate and load BIOS */
memory_region_init_ram(bios, "ppc_heathrow.bios", BIOS_SIZE);
vmstate_register_ram_global(bios);
if (bios_name == NULL)
bios_name = PROM_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
memory_region_set_readonly(bios, true);
memory_region_add_subregion(sysmem, PROM_ADDR, bios);
/* Load OpenBIOS (ELF) */
if (filename) {
bios_size = load_elf(filename, 0, NULL, NULL, NULL, NULL,
1, ELF_MACHINE, 0);
g_free(filename);
} else {
bios_size = -1;
}
if (bios_size < 0 || bios_size > BIOS_SIZE) {
hw_error("qemu: could not load PowerPC bios '%s'\n", bios_name);
exit(1);
}
if (linux_boot) {
uint64_t lowaddr = 0;
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_base = KERNEL_LOAD_ADDR;
kernel_size = load_elf(kernel_filename, translate_kernel_address, NULL,
NULL, &lowaddr, NULL, 1, ELF_MACHINE, 0);
if (kernel_size < 0)
kernel_size = load_aout(kernel_filename, kernel_base,
ram_size - kernel_base, bswap_needed,
TARGET_PAGE_SIZE);
if (kernel_size < 0)
kernel_size = load_image_targphys(kernel_filename,
kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
hw_error("qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = round_page(kernel_base + kernel_size + KERNEL_GAP);
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
hw_error("qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
cmdline_base = round_page(initrd_base + initrd_size);
} else {
initrd_base = 0;
initrd_size = 0;
cmdline_base = round_page(kernel_base + kernel_size + KERNEL_GAP);
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
for (i = 0; boot_device[i] != '\0'; i++) {
/* TOFIX: for now, the second IDE channel is not properly
* used by OHW. The Mac floppy disk are not emulated.
* For now, OHW cannot boot from the network.
*/
#if 0
if (boot_device[i] >= 'a' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
#else
if (boot_device[i] >= 'c' && boot_device[i] <= 'd') {
ppc_boot_device = boot_device[i];
break;
}
#endif
}
if (ppc_boot_device == '\0') {
fprintf(stderr, "No valid boot device for G3 Beige machine\n");
exit(1);
}
}
/* Register 2 MB of ISA IO space */
isa_mmio_init(0xfe000000, 0x00200000);
/* XXX: we register only 1 output pin for heathrow PIC */
heathrow_irqs = g_malloc0(smp_cpus * sizeof(qemu_irq *));
heathrow_irqs[0] =
g_malloc0(smp_cpus * sizeof(qemu_irq) * 1);
/* Connect the heathrow PIC outputs to the 6xx bus */
for (i = 0; i < smp_cpus; i++) {
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_6xx:
heathrow_irqs[i] = heathrow_irqs[0] + (i * 1);
heathrow_irqs[i][0] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
break;
default:
hw_error("Bus model not supported on OldWorld Mac machine\n");
}
}
/* init basic PC hardware */
if (PPC_INPUT(env) != PPC_FLAGS_INPUT_6xx) {
hw_error("Only 6xx bus is supported on heathrow machine\n");
}
pic = heathrow_pic_init(&pic_mem, 1, heathrow_irqs);
pci_bus = pci_grackle_init(0xfec00000, pic,
get_system_memory(),
get_system_io());
pci_vga_init(pci_bus);
escc_mem = escc_init(0, pic[0x0f], pic[0x10], serial_hds[0],
serial_hds[1], ESCC_CLOCK, 4);
memory_region_init_alias(escc_bar, "escc-bar",
escc_mem, 0, memory_region_size(escc_mem));
for(i = 0; i < nb_nics; i++)
pci_nic_init_nofail(&nd_table[i], "ne2k_pci", NULL);
ide_drive_get(hd, MAX_IDE_BUS);
/* First IDE channel is a MAC IDE on the MacIO bus */
dbdma = DBDMA_init(&dbdma_mem);
ide_mem[0] = NULL;
ide_mem[1] = pmac_ide_init(hd, pic[0x0D], dbdma, 0x16, pic[0x02]);
/* Second IDE channel is a CMD646 on the PCI bus */
hd[0] = hd[MAX_IDE_DEVS];
hd[1] = hd[MAX_IDE_DEVS + 1];
hd[3] = hd[2] = NULL;
pci_cmd646_ide_init(pci_bus, hd, 0);
/* cuda also initialize ADB */
cuda_init(&cuda_mem, pic[0x12]);
adb_kbd_init(&adb_bus);
adb_mouse_init(&adb_bus);
nvr = macio_nvram_init(0x2000, 4);
pmac_format_nvram_partition(nvr, 0x2000);
macio_init(pci_bus, PCI_DEVICE_ID_APPLE_343S1201, 1, pic_mem,
dbdma_mem, cuda_mem, nvr, 2, ide_mem, escc_bar);
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, -1);
}
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
graphic_depth = 15;
/* No PCI init: the BIOS will do it */
fw_cfg = fw_cfg_init(0, 0, CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_HEATHROW);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, cmdline_base);
pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE, kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
if (kvm_enabled()) {
#ifdef CONFIG_KVM
uint8_t *hypercall;
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, kvmppc_get_tbfreq());
hypercall = g_malloc(16);
kvmppc_get_hypercall(env, hypercall, 16);
fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
#endif
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, get_ticks_per_sec());
}
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
/* PowerPC Mac99 hardware initialisation */
static void ppc_core99_init (ram_addr_t ram_size, int vga_ram_size,
const char *boot_device, DisplayState *ds,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env = NULL, *envs[MAX_CPUS];
char buf[1024];
qemu_irq *pic, **openpic_irqs;
int unin_memory;
int linux_boot, i;
unsigned long bios_offset, vga_bios_offset;
uint32_t kernel_base, kernel_size, initrd_base, initrd_size;
PCIBus *pci_bus;
nvram_t nvram;
#if 0
MacIONVRAMState *nvr;
int nvram_mem_index;
#endif
m48t59_t *m48t59;
int vga_bios_size, bios_size;
qemu_irq *dummy_irq;
int pic_mem_index, dbdma_mem_index, cuda_mem_index;
int ide_mem_index[2];
int ppc_boot_device;
int index;
BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
linux_boot = (kernel_filename != NULL);
/* init CPUs */
if (cpu_model == NULL)
cpu_model = "default";
for (i = 0; i < smp_cpus; i++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find PowerPC CPU definition\n");
exit(1);
}
/* Set time-base frequency to 100 Mhz */
cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
#if 0
env->osi_call = vga_osi_call;
#endif
qemu_register_reset(&cpu_ppc_reset, env);
register_savevm("cpu", 0, 3, cpu_save, cpu_load, env);
envs[i] = env;
}
if (env->nip < 0xFFF80000) {
/* Special test for PowerPC 601:
* the boot vector is at 0xFFF00100, then we need a 1MB BIOS.
* But the NVRAM is located at 0xFFF04000...
*/
cpu_abort(env, "Mac99 hardware can not handle 1 MB BIOS\n");
}
/* allocate RAM */
cpu_register_physical_memory(0, ram_size, IO_MEM_RAM);
/* allocate and load BIOS */
bios_offset = ram_size + vga_ram_size;
if (bios_name == NULL)
bios_name = BIOS_FILENAME;
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, bios_name);
bios_size = load_image(buf, phys_ram_base + bios_offset);
if (bios_size < 0 || bios_size > BIOS_SIZE) {
cpu_abort(env, "qemu: could not load PowerPC bios '%s'\n", buf);
exit(1);
}
bios_size = (bios_size + 0xfff) & ~0xfff;
if (bios_size > 0x00080000) {
/* As the NVRAM is located at 0xFFF04000, we cannot use 1 MB BIOSes */
cpu_abort(env, "Mac99 hardware can not handle 1 MB BIOS\n");
}
cpu_register_physical_memory((uint32_t)(-bios_size),
bios_size, bios_offset | IO_MEM_ROM);
/* allocate and load VGA BIOS */
vga_bios_offset = bios_offset + bios_size;
snprintf(buf, sizeof(buf), "%s/%s", bios_dir, VGABIOS_FILENAME);
vga_bios_size = load_image(buf, phys_ram_base + vga_bios_offset + 8);
if (vga_bios_size < 0) {
/* if no bios is present, we can still work */
fprintf(stderr, "qemu: warning: could not load VGA bios '%s'\n", buf);
vga_bios_size = 0;
} else {
/* set a specific header (XXX: find real Apple format for NDRV
drivers) */
phys_ram_base[vga_bios_offset] = 'N';
phys_ram_base[vga_bios_offset + 1] = 'D';
phys_ram_base[vga_bios_offset + 2] = 'R';
phys_ram_base[vga_bios_offset + 3] = 'V';
cpu_to_be32w((uint32_t *)(phys_ram_base + vga_bios_offset + 4),
vga_bios_size);
vga_bios_size += 8;
}
vga_bios_size = (vga_bios_size + 0xfff) & ~0xfff;
if (linux_boot) {
kernel_base = KERNEL_LOAD_ADDR;
/* now we can load the kernel */
kernel_size = load_image(kernel_filename, phys_ram_base + kernel_base);
if (kernel_size < 0) {
cpu_abort(env, "qemu: could not load kernel '%s'\n",
kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = INITRD_LOAD_ADDR;
initrd_size = load_image(initrd_filename,
phys_ram_base + initrd_base);
if (initrd_size < 0) {
cpu_abort(env, "qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
} else {
initrd_base = 0;
initrd_size = 0;
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
/* We consider that NewWorld PowerMac never have any floppy drive
* For now, OHW cannot boot from the network.
*/
for (i = 0; boot_device[i] != '\0'; i++) {
if (boot_device[i] >= 'c' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
}
if (ppc_boot_device == '\0') {
fprintf(stderr, "No valid boot device for Mac99 machine\n");
exit(1);
}
}
isa_mem_base = 0x80000000;
/* Register 8 MB of ISA IO space */
isa_mmio_init(0xf2000000, 0x00800000);
/* UniN init */
unin_memory = cpu_register_io_memory(0, unin_read, unin_write, NULL);
cpu_register_physical_memory(0xf8000000, 0x00001000, unin_memory);
openpic_irqs = qemu_mallocz(smp_cpus * sizeof(qemu_irq *));
openpic_irqs[0] =
qemu_mallocz(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
for (i = 0; i < smp_cpus; i++) {
/* Mac99 IRQ connection between OpenPIC outputs pins
* and PowerPC input pins
*/
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_6xx:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_HRESET];
break;
#if defined(TARGET_PPC64)
case PPC_FLAGS_INPUT_970:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_HRESET];
break;
#endif /* defined(TARGET_PPC64) */
default:
cpu_abort(env, "Bus model not supported on mac99 machine\n");
exit(1);
}
}
pic = openpic_init(NULL, &pic_mem_index, smp_cpus, openpic_irqs, NULL);
pci_bus = pci_pmac_init(pic);
/* init basic PC hardware */
pci_vga_init(pci_bus, ds, phys_ram_base + ram_size,
ram_size, vga_ram_size,
vga_bios_offset, vga_bios_size);
/* XXX: suppress that */
dummy_irq = i8259_init(NULL);
/* XXX: use Mac Serial port */
serial_init(0x3f8, dummy_irq[4], 115200, serial_hds[0]);
for(i = 0; i < nb_nics; i++) {
if (!nd_table[i].model)
nd_table[i].model = "ne2k_pci";
pci_nic_init(pci_bus, &nd_table[i], -1);
}
if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
fprintf(stderr, "qemu: too many IDE bus\n");
exit(1);
}
for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
if (index != -1)
hd[i] = drives_table[index].bdrv;
else
hd[i] = NULL;
}
#if 1
ide_mem_index[0] = pmac_ide_init(&hd[0], pic[0x13]);
ide_mem_index[1] = pmac_ide_init(&hd[2], pic[0x14]);
#else
pci_cmd646_ide_init(pci_bus, &hd[0], 0);
#endif
/* cuda also initialize ADB */
cuda_init(&cuda_mem_index, pic[0x19]);
adb_kbd_init(&adb_bus);
adb_mouse_init(&adb_bus);
dbdma_init(&dbdma_mem_index);
macio_init(pci_bus, 0x0022, 0, pic_mem_index, dbdma_mem_index,
cuda_mem_index, NULL, 2, ide_mem_index);
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, 3, -1);
}
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
graphic_depth = 15;
#if 0 /* XXX: this is ugly but needed for now, or OHW won't boot */
/* The NewWorld NVRAM is not located in the MacIO device */
nvr = macio_nvram_init(&nvram_mem_index, 0x2000);
pmac_format_nvram_partition(nvr, 0x2000);
macio_nvram_map(nvr, 0xFFF04000);
nvram.opaque = nvr;
nvram.read_fn = &macio_nvram_read;
nvram.write_fn = &macio_nvram_write;
#else
m48t59 = m48t59_init(dummy_irq[8], 0xFFF04000, 0x0074, NVRAM_SIZE, 59);
nvram.opaque = m48t59;
nvram.read_fn = &m48t59_read;
nvram.write_fn = &m48t59_write;
#endif
PPC_NVRAM_set_params(&nvram, NVRAM_SIZE, "MAC99", ram_size,
ppc_boot_device, kernel_base, kernel_size,
kernel_cmdline,
initrd_base, initrd_size,
/* XXX: need an option to load a NVRAM image */
0,
graphic_width, graphic_height, graphic_depth);
/* No PCI init: the BIOS will do it */
/* Special port to get debug messages from Open-Firmware */
register_ioport_write(0x0F00, 4, 1, &PPC_debug_write, NULL);
}
/* PowerPC Mac99 hardware initialisation */
static void ppc_core99_init (ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env = NULL, *envs[MAX_CPUS];
char *filename;
qemu_irq *pic, **openpic_irqs;
int unin_memory;
int linux_boot, i;
ram_addr_t ram_offset, bios_offset, vga_bios_offset;
uint32_t kernel_base, kernel_size, initrd_base, initrd_size;
PCIBus *pci_bus;
MacIONVRAMState *nvr;
int nvram_mem_index;
int vga_bios_size, bios_size;
int pic_mem_index, dbdma_mem_index, cuda_mem_index, escc_mem_index;
int ide_mem_index[3];
int ppc_boot_device;
DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
void *fw_cfg;
void *dbdma;
uint8_t *vga_bios_ptr;
int machine_arch;
linux_boot = (kernel_filename != NULL);
/* init CPUs */
if (cpu_model == NULL)
#ifdef TARGET_PPC64
cpu_model = "970fx";
#else
cpu_model = "G4";
#endif
for (i = 0; i < smp_cpus; i++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find PowerPC CPU definition\n");
exit(1);
}
/* Set time-base frequency to 100 Mhz */
cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
#if 0
env->osi_call = vga_osi_call;
#endif
qemu_register_reset((QEMUResetHandler*)&cpu_reset, env);
envs[i] = env;
}
/* allocate RAM */
ram_offset = qemu_ram_alloc(NULL, "ppc_core99.ram", ram_size);
cpu_register_physical_memory(0, ram_size, ram_offset);
/* allocate and load BIOS */
bios_offset = qemu_ram_alloc(NULL, "ppc_core99.bios", BIOS_SIZE);
if (bios_name == NULL)
bios_name = PROM_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
cpu_register_physical_memory(PROM_ADDR, BIOS_SIZE, bios_offset | IO_MEM_ROM);
/* Load OpenBIOS (ELF) */
if (filename) {
bios_size = load_elf(filename, NULL, NULL, NULL,
NULL, NULL, 1, ELF_MACHINE, 0);
qemu_free(filename);
} else {
bios_size = -1;
}
if (bios_size < 0 || bios_size > BIOS_SIZE) {
hw_error("qemu: could not load PowerPC bios '%s'\n", bios_name);
exit(1);
}
/* allocate and load VGA BIOS */
vga_bios_offset = qemu_ram_alloc(NULL, "ppc_core99.vbios", VGA_BIOS_SIZE);
vga_bios_ptr = qemu_get_ram_ptr(vga_bios_offset);
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, VGABIOS_FILENAME);
if (filename) {
vga_bios_size = load_image(filename, vga_bios_ptr + 8);
qemu_free(filename);
} else {
vga_bios_size = -1;
}
if (vga_bios_size < 0) {
/* if no bios is present, we can still work */
fprintf(stderr, "qemu: warning: could not load VGA bios '%s'\n",
VGABIOS_FILENAME);
vga_bios_size = 0;
} else {
/* set a specific header (XXX: find real Apple format for NDRV
drivers) */
vga_bios_ptr[0] = 'N';
vga_bios_ptr[1] = 'D';
vga_bios_ptr[2] = 'R';
vga_bios_ptr[3] = 'V';
cpu_to_be32w((uint32_t *)(vga_bios_ptr + 4), vga_bios_size);
vga_bios_size += 8;
/* Round to page boundary */
vga_bios_size = (vga_bios_size + TARGET_PAGE_SIZE - 1) &
TARGET_PAGE_MASK;
}
if (linux_boot) {
uint64_t lowaddr = 0;
int bswap_needed;
#ifdef BSWAP_NEEDED
bswap_needed = 1;
#else
bswap_needed = 0;
#endif
kernel_base = KERNEL_LOAD_ADDR;
kernel_size = load_elf(kernel_filename, translate_kernel_address, NULL,
NULL, &lowaddr, NULL, 1, ELF_MACHINE, 0);
if (kernel_size < 0)
kernel_size = load_aout(kernel_filename, kernel_base,
ram_size - kernel_base, bswap_needed,
TARGET_PAGE_SIZE);
if (kernel_size < 0)
kernel_size = load_image_targphys(kernel_filename,
kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = INITRD_LOAD_ADDR;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
hw_error("qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
} else {
initrd_base = 0;
initrd_size = 0;
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
/* We consider that NewWorld PowerMac never have any floppy drive
* For now, OHW cannot boot from the network.
*/
for (i = 0; boot_device[i] != '\0'; i++) {
if (boot_device[i] >= 'c' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
}
if (ppc_boot_device == '\0') {
fprintf(stderr, "No valid boot device for Mac99 machine\n");
exit(1);
}
}
isa_mem_base = 0x80000000;
/* Register 8 MB of ISA IO space */
isa_mmio_init(0xf2000000, 0x00800000, 1);
/* UniN init */
unin_memory = cpu_register_io_memory(unin_read, unin_write, NULL);
cpu_register_physical_memory(0xf8000000, 0x00001000, unin_memory);
openpic_irqs = qemu_mallocz(smp_cpus * sizeof(qemu_irq *));
openpic_irqs[0] =
qemu_mallocz(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
for (i = 0; i < smp_cpus; i++) {
/* Mac99 IRQ connection between OpenPIC outputs pins
* and PowerPC input pins
*/
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_6xx:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_HRESET];
break;
#if defined(TARGET_PPC64)
case PPC_FLAGS_INPUT_970:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_HRESET];
break;
#endif /* defined(TARGET_PPC64) */
default:
hw_error("Bus model not supported on mac99 machine\n");
exit(1);
}
}
pic = openpic_init(NULL, &pic_mem_index, smp_cpus, openpic_irqs, NULL);
if (PPC_INPUT(env) == PPC_FLAGS_INPUT_970) {
/* 970 gets a U3 bus */
pci_bus = pci_pmac_u3_init(pic);
machine_arch = ARCH_MAC99_U3;
} else {
pci_bus = pci_pmac_init(pic);
machine_arch = ARCH_MAC99;
}
/* init basic PC hardware */
pci_vga_init(pci_bus, vga_bios_offset, vga_bios_size);
escc_mem_index = escc_init(0x80013000, pic[0x25], pic[0x24],
serial_hds[0], serial_hds[1], ESCC_CLOCK, 4);
for(i = 0; i < nb_nics; i++)
pci_nic_init_nofail(&nd_table[i], "ne2k_pci", NULL);
if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
fprintf(stderr, "qemu: too many IDE bus\n");
exit(1);
}
dbdma = DBDMA_init(&dbdma_mem_index);
/* We only emulate 2 out of 3 IDE controllers for now */
ide_mem_index[0] = -1;
hd[0] = drive_get(IF_IDE, 0, 0);
hd[1] = drive_get(IF_IDE, 0, 1);
ide_mem_index[1] = pmac_ide_init(hd, pic[0x0d], dbdma, 0x16, pic[0x02]);
hd[0] = drive_get(IF_IDE, 1, 0);
hd[1] = drive_get(IF_IDE, 1, 1);
ide_mem_index[2] = pmac_ide_init(hd, pic[0x0e], dbdma, 0x1a, pic[0x02]);
/* cuda also initialize ADB */
if (machine_arch == ARCH_MAC99_U3) {
usb_enabled = 1;
}
cuda_init(&cuda_mem_index, pic[0x19]);
adb_kbd_init(&adb_bus);
adb_mouse_init(&adb_bus);
macio_init(pci_bus, PCI_DEVICE_ID_APPLE_UNI_N_KEYL, 0, pic_mem_index,
dbdma_mem_index, cuda_mem_index, NULL, 3, ide_mem_index,
escc_mem_index);
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, -1);
}
/* U3 needs to use USB for input because Linux doesn't support via-cuda
on PPC64 */
if (machine_arch == ARCH_MAC99_U3) {
usbdevice_create("keyboard");
usbdevice_create("mouse");
}
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
graphic_depth = 15;
/* The NewWorld NVRAM is not located in the MacIO device */
nvr = macio_nvram_init(&nvram_mem_index, 0x2000, 1);
pmac_format_nvram_partition(nvr, 0x2000);
macio_nvram_map(nvr, 0xFFF04000);
/* No PCI init: the BIOS will do it */
fw_cfg = fw_cfg_init(0, 0, CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, machine_arch);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
pstrcpy_targphys("cmdline", CMDLINE_ADDR, TARGET_PAGE_SIZE, kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height);
fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled());
if (kvm_enabled()) {
#ifdef CONFIG_KVM
uint8_t *hypercall;
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, kvmppc_get_tbfreq());
hypercall = qemu_malloc(16);
kvmppc_get_hypercall(env, hypercall, 16);
fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16);
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid());
#endif
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, get_ticks_per_sec());
}
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
/* PowerPC Mac99 hardware initialisation */
static void ppc_core99_init (ram_addr_t ram_size,
const char *boot_device,
const char *kernel_filename,
const char *kernel_cmdline,
const char *initrd_filename,
const char *cpu_model)
{
CPUState *env = NULL, *envs[MAX_CPUS];
char *filename;
qemu_irq *pic, **openpic_irqs;
int unin_memory;
int linux_boot, i;
ram_addr_t ram_offset, bios_offset, vga_bios_offset;
uint32_t kernel_base, kernel_size, initrd_base, initrd_size;
PCIBus *pci_bus;
MacIONVRAMState *nvr;
int nvram_mem_index;
int vga_bios_size, bios_size;
qemu_irq *dummy_irq;
int pic_mem_index, dbdma_mem_index, cuda_mem_index, escc_mem_index;
int ppc_boot_device;
int index;
BlockDriverState *hd[MAX_IDE_BUS * MAX_IDE_DEVS];
void *fw_cfg;
void *dbdma;
uint8_t *vga_bios_ptr;
linux_boot = (kernel_filename != NULL);
/* init CPUs */
if (cpu_model == NULL)
cpu_model = "G4";
for (i = 0; i < smp_cpus; i++) {
env = cpu_init(cpu_model);
if (!env) {
fprintf(stderr, "Unable to find PowerPC CPU definition\n");
exit(1);
}
/* Set time-base frequency to 100 Mhz */
cpu_ppc_tb_init(env, 100UL * 1000UL * 1000UL);
#if 0
env->osi_call = vga_osi_call;
#endif
qemu_register_reset(&cpu_ppc_reset, env);
envs[i] = env;
}
/* allocate RAM */
ram_offset = qemu_ram_alloc(ram_size);
cpu_register_physical_memory(0, ram_size, ram_offset);
/* allocate and load BIOS */
bios_offset = qemu_ram_alloc(BIOS_SIZE);
if (bios_name == NULL)
bios_name = PROM_FILENAME;
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
cpu_register_physical_memory(PROM_ADDR, BIOS_SIZE, bios_offset | IO_MEM_ROM);
/* Load OpenBIOS (ELF) */
if (filename) {
bios_size = load_elf(filename, 0, NULL, NULL, NULL);
qemu_free(filename);
} else {
bios_size = -1;
}
if (bios_size < 0 || bios_size > BIOS_SIZE) {
hw_error("qemu: could not load PowerPC bios '%s'\n", bios_name);
exit(1);
}
/* allocate and load VGA BIOS */
vga_bios_offset = qemu_ram_alloc(VGA_BIOS_SIZE);
vga_bios_ptr = qemu_get_ram_ptr(vga_bios_offset);
filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, VGABIOS_FILENAME);
if (filename) {
vga_bios_size = load_image(filename, vga_bios_ptr + 8);
qemu_free(filename);
} else {
vga_bios_size = -1;
}
if (vga_bios_size < 0) {
/* if no bios is present, we can still work */
fprintf(stderr, "qemu: warning: could not load VGA bios '%s'\n",
VGABIOS_FILENAME);
vga_bios_size = 0;
} else {
/* set a specific header (XXX: find real Apple format for NDRV
drivers) */
vga_bios_ptr[0] = 'N';
vga_bios_ptr[1] = 'D';
vga_bios_ptr[2] = 'R';
vga_bios_ptr[3] = 'V';
cpu_to_be32w((uint32_t *)(vga_bios_ptr + 4), vga_bios_size);
vga_bios_size += 8;
}
if (linux_boot) {
uint64_t lowaddr = 0;
kernel_base = KERNEL_LOAD_ADDR;
/* Now we can load the kernel. The first step tries to load the kernel
supposing PhysAddr = 0x00000000. If that was wrong the kernel is
loaded again, the new PhysAddr being computed from lowaddr. */
kernel_size = load_elf(kernel_filename, kernel_base, NULL, &lowaddr, NULL);
if (kernel_size > 0 && lowaddr != KERNEL_LOAD_ADDR) {
kernel_size = load_elf(kernel_filename, (2 * kernel_base) - lowaddr,
NULL, NULL, NULL);
}
if (kernel_size < 0)
kernel_size = load_aout(kernel_filename, kernel_base,
ram_size - kernel_base);
if (kernel_size < 0)
kernel_size = load_image_targphys(kernel_filename,
kernel_base,
ram_size - kernel_base);
if (kernel_size < 0) {
hw_error("qemu: could not load kernel '%s'\n", kernel_filename);
exit(1);
}
/* load initrd */
if (initrd_filename) {
initrd_base = INITRD_LOAD_ADDR;
initrd_size = load_image_targphys(initrd_filename, initrd_base,
ram_size - initrd_base);
if (initrd_size < 0) {
hw_error("qemu: could not load initial ram disk '%s'\n",
initrd_filename);
exit(1);
}
} else {
initrd_base = 0;
initrd_size = 0;
}
ppc_boot_device = 'm';
} else {
kernel_base = 0;
kernel_size = 0;
initrd_base = 0;
initrd_size = 0;
ppc_boot_device = '\0';
/* We consider that NewWorld PowerMac never have any floppy drive
* For now, OHW cannot boot from the network.
*/
for (i = 0; boot_device[i] != '\0'; i++) {
if (boot_device[i] >= 'c' && boot_device[i] <= 'f') {
ppc_boot_device = boot_device[i];
break;
}
}
if (ppc_boot_device == '\0') {
fprintf(stderr, "No valid boot device for Mac99 machine\n");
exit(1);
}
}
isa_mem_base = 0x80000000;
/* Register 8 MB of ISA IO space */
isa_mmio_init(0xf2000000, 0x00800000);
/* UniN init */
unin_memory = cpu_register_io_memory(unin_read, unin_write, NULL);
cpu_register_physical_memory(0xf8000000, 0x00001000, unin_memory);
openpic_irqs = qemu_mallocz(smp_cpus * sizeof(qemu_irq *));
openpic_irqs[0] =
qemu_mallocz(smp_cpus * sizeof(qemu_irq) * OPENPIC_OUTPUT_NB);
for (i = 0; i < smp_cpus; i++) {
/* Mac99 IRQ connection between OpenPIC outputs pins
* and PowerPC input pins
*/
switch (PPC_INPUT(env)) {
case PPC_FLAGS_INPUT_6xx:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_HRESET];
break;
#if defined(TARGET_PPC64)
case PPC_FLAGS_INPUT_970:
openpic_irqs[i] = openpic_irqs[0] + (i * OPENPIC_OUTPUT_NB);
openpic_irqs[i][OPENPIC_OUTPUT_INT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_CINT] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_INT];
openpic_irqs[i][OPENPIC_OUTPUT_MCK] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_MCP];
/* Not connected ? */
openpic_irqs[i][OPENPIC_OUTPUT_DEBUG] = NULL;
/* Check this */
openpic_irqs[i][OPENPIC_OUTPUT_RESET] =
((qemu_irq *)env->irq_inputs)[PPC970_INPUT_HRESET];
break;
#endif /* defined(TARGET_PPC64) */
default:
hw_error("Bus model not supported on mac99 machine\n");
exit(1);
}
}
pic = openpic_init(NULL, &pic_mem_index, smp_cpus, openpic_irqs, NULL);
pci_bus = pci_pmac_init(pic);
/* init basic PC hardware */
pci_vga_init(pci_bus, vga_bios_offset, vga_bios_size);
/* XXX: suppress that */
dummy_irq = i8259_init(NULL);
escc_mem_index = escc_init(0x80013000, dummy_irq[4], dummy_irq[5],
serial_hds[0], serial_hds[1], ESCC_CLOCK, 4);
for(i = 0; i < nb_nics; i++)
pci_nic_init(&nd_table[i], "ne2k_pci", NULL);
if (drive_get_max_bus(IF_IDE) >= MAX_IDE_BUS) {
fprintf(stderr, "qemu: too many IDE bus\n");
exit(1);
}
for(i = 0; i < MAX_IDE_BUS * MAX_IDE_DEVS; i++) {
index = drive_get_index(IF_IDE, i / MAX_IDE_DEVS, i % MAX_IDE_DEVS);
if (index != -1)
hd[i] = drives_table[index].bdrv;
else
hd[i] = NULL;
}
dbdma = DBDMA_init(&dbdma_mem_index);
pci_cmd646_ide_init(pci_bus, hd, 0);
/* cuda also initialize ADB */
cuda_init(&cuda_mem_index, pic[0x19]);
adb_kbd_init(&adb_bus);
adb_mouse_init(&adb_bus);
macio_init(pci_bus, PCI_DEVICE_ID_APPLE_UNI_N_KEYL, 0, pic_mem_index,
dbdma_mem_index, cuda_mem_index, NULL, 0, NULL,
escc_mem_index);
if (usb_enabled) {
usb_ohci_init_pci(pci_bus, 3, -1);
}
if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8)
graphic_depth = 15;
/* The NewWorld NVRAM is not located in the MacIO device */
nvr = macio_nvram_init(&nvram_mem_index, 0x2000, 1);
pmac_format_nvram_partition(nvr, 0x2000);
macio_nvram_map(nvr, 0xFFF04000);
/* No PCI init: the BIOS will do it */
fw_cfg = fw_cfg_init(0, 0, CFG_ADDR, CFG_ADDR + 2);
fw_cfg_add_i32(fw_cfg, FW_CFG_ID, 1);
fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_MAC99);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size);
if (kernel_cmdline) {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, CMDLINE_ADDR);
pstrcpy_targphys(CMDLINE_ADDR, TARGET_PAGE_SIZE, kernel_cmdline);
} else {
fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0);
}
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base);
fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size);
fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device);
qemu_register_boot_set(fw_cfg_boot_set, fw_cfg);
}
