/**
* usb_hid_mouse application entry.
*
* Initializes the system and then monitors buttons, sending the
* corresponding character when one is pressed.
*/
int main(void)
{
uint8_t bm_buttons = 0;
int8_t dx = 0, dy = 0;
uint8_t is_changed;
/* Disable watchdog */
wdt_disable();
/* Configure console */
board_cfg_console();
printf("-- USB Device HID Mouse Project %s --\n\r", SOFTPACK_VERSION);
printf("-- %s\n\r", BOARD_NAME);
printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);
/* If they are present, configure Vbus & Wake-up pins */
pio_reset_all_it();
/* Initialize all USB power (off) */
usb_power_configure();
#ifdef NO_PUSHBUTTON
printf("-- Press I J K L to move cursor\n\r");
#else
/* Initialize key statuses and configure push buttons */
pio_configure(pins_joystick, ARRAY_SIZE(pins_joystick));
#endif
/* HID driver initialization */
hidd_mouse_driver_initialize(&hidd_mouse_driver_descriptors);
/* connect if needed */
usb_vbus_configure();
/* Infinite loop */
while (1) {
if (usbd_get_state() < USBD_STATE_CONFIGURED)
continue;
is_changed = _buttons_monitor(&bm_buttons, &dx, &dy);
if (is_changed) {
uint8_t status;
do {
status = hidd_mouse_driver_change_points(bm_buttons, dx, dy);
} while (status != USBD_STATUS_SUCCESS);
}
}
}
/**
* usb_hid_mouse application entry.
*
* Initializes the system and then monitors buttons, sending the
* corresponding character when one is pressed.
*/
int main(void)
{
uint8_t bm_buttons = 0;
int8_t dx = 0, dy = 0;
uint8_t is_changed;
/* Output example information */
console_example_info("USB Device HID Mouse Example");
/* Initialize all USB power (off) */
usb_power_configure();
#ifdef NO_PUSHBUTTON
printf("-- Press I J K L to move cursor\n\r");
#else
/* Initialize key statuses and configure push buttons */
pio_configure(pins_joystick, ARRAY_SIZE(pins_joystick));
#endif
/* HID driver initialization */
hidd_mouse_driver_initialize(&hidd_mouse_driver_descriptors);
/* connect if needed */
usb_vbus_configure();
/* Infinite loop */
while (1) {
if (usbd_get_state() < USBD_STATE_CONFIGURED)
continue;
is_changed = _buttons_monitor(&bm_buttons, &dx, &dy);
if (is_changed) {
uint8_t status;
do {
status = hidd_mouse_driver_change_points(bm_buttons, dx, dy);
} while (status != USBD_STATUS_SUCCESS);
}
}
}
/**
* Initializes drivers and start the USB Dual CDC device.
*/
int main(void)
{
uint8_t usb_connected = 0;
uint8_t serial0_on = 0, serial1_on = 0, usart_on = 0;
uint8_t serial0_read = 1;
uint8_t serial1_read = 1;
/* Output example information */
console_example_info("USB Dual CDC Device Example");
/* If there is on board power, switch it off */
usb_power_configure();
/* ----- CDC Function Initialize */
/* USB DualCDC driver initialization */
dual_cdcd_driver_initialize(&dual_cdcd_driver_descriptors);
/* connect if needed */
usb_vbus_configure();
/* Driver loop */
while (1) {
/* Device is not configured */
if (usbd_get_state() < USBD_STATE_CONFIGURED) {
if (usb_connected) {
printf("-I- USB Disconnect/Suspend\n\r");
usb_connected = 0;
/* Serial port closed */
is_serial_port0_on = 0;
is_serial_port1_on = 0;
is_usart_on = 0;
}
} else {
is_serial_port0_on = cdcd_serial_port_get_control_line_state(
dual_cdcd_driver_get_serialport(0))
& CDCControlLineState_DTR;
is_serial_port1_on = cdcd_serial_port_get_control_line_state(
dual_cdcd_driver_get_serialport(1))
& CDCControlLineState_DTR;
if (usb_connected == 0) {
printf("-I- USB Connect\n\r");
usb_connected = 1;
}
is_usart_on = is_serial_port0_on || is_serial_port1_on;
if (!usart_on && is_usart_on) {
usart_on = 1;
printf("-I- USART ON\n\r");
} else if (usart_on && !is_usart_on) {
usart_on = 0;
printf("-I- USART OFF\n\r");
}
if (is_serial_port0_on) {
if(!serial0_on) {
serial0_on = 1;
printf("-I- SerialPort0 ON\n\r");
}
/* Start receiving data on the USB */
if (serial0_read == 1) {
serial0_read = 0;
cdcd_serial_port_read(dual_cdcd_driver_get_serialport(0),
usb_serial_buffer0,
DATAPACKETSIZE,
(usbd_xfer_cb_t) _usb_data_received0,
&serial0_read);
}
} else if (serial0_on && !is_serial_port0_on) {
serial0_on = 0;
printf("-I- SerialPort0 OFF\n\r");
}
if (is_serial_port1_on) {
if(!serial1_on) {
serial1_on = 1;
printf("-I- SerialPort1 ON\n\r");
}
/* Start receiving data on the USB */
if (serial1_read == 1) {
serial1_read = 0;
cdcd_serial_port_read(dual_cdcd_driver_get_serialport(1),
usb_serial_buffer1,
DATAPACKETSIZE,
(usbd_xfer_cb_t) _usb_data_received1,
&serial1_read);
}
} else if (serial1_on && !is_serial_port1_on) {
serial1_on = 0;
printf("-I- SerialPort1 OFF\n\r");
}
}
}
}
/**
* \brief usb_cdc_serial Application entry point.
*
* Initializes drivers and start the USB <-> Serial bridge.
*/
int main(void)
{
uint8_t is_usb_connected = 0;
uint8_t usb_serial_read = 1;
/* Disable watchdog */
wdt_disable();
/* Configure console */
board_cfg_console();
/* Output example information */
printf("-- USB Device CDC Serial Project %s --\n\r", SOFTPACK_VERSION);
printf("-- %s\n\r", BOARD_NAME);
printf("-- Compiled: %s %s --\n\r", __DATE__, __TIME__);
/* Initialize all USB power (off) */
usb_power_configure();
/* Configure USART */
_configure_usart();
/* CDC serial driver initialization */
cdcd_serial_driver_initialize(&cdcd_serial_driver_descriptors);
/* Help informaiton */
_debug_help();
/* connect if needed */
usb_vbus_configure();
/* Driver loop */
while (1) {
/* Device is not configured */
if (usbd_get_state() < USBD_STATE_CONFIGURED) {
if (is_usb_connected) {
is_usb_connected = 0;
is_cdc_serial_on = 0;
}
} else if (is_usb_connected == 0) {
is_usb_connected = 1;
}
/* Serial port ON/OFF */
if (cdcd_serial_driver_get_control_line_state()
& CDCControlLineState_DTR) {
if (!is_cdc_serial_on) {
is_cdc_serial_on = 1;
}
if(usb_serial_read == 1) {
usb_serial_read = 0;
/* Start receiving data on the USB */
cdcd_serial_driver_read(usb_buffer, DATAPACKETSIZE,
_usb_data_received, &usb_serial_read);
}
if(usart_rx_flag == true) {
usart_rx_flag = false;
cdcd_serial_driver_write((void *)&char_recv, 1, 0, 0);
if(is_cdc_echo_on) {
_usart_dma_tx((uint8_t*)&char_recv, 1);
}
}
} else if (is_cdc_serial_on) {
is_cdc_serial_on = 0;
}
if (console_is_rx_ready()) {
uint8_t key = console_get_char();
/* ESC: CDC Echo ON/OFF */
if (key == 27) {
printf("** CDC Echo %s\n\r",
is_cdc_echo_on ? "OFF" : "ON");
is_cdc_echo_on = !is_cdc_echo_on;
} else if (key == 't') {
/* 't': Test CDC writing */
_send_text();
} else {
printf("Alive\n\r");
cdcd_serial_driver_write((char*)"Alive\n\r", 8,
NULL, NULL);
_usart_dma_tx((uint8_t*)"Alive\n\r", 8);
_debug_help();
}
}
}
}