/*
* Wait for the write path to come idle.
* This is called under the ->wmut, so the idle path stays idle.
*
* Our write path has a peculiar property: it does not buffer like a tty,
* but waits for the write to succeed. This allows our ->release to bug out
* without waiting for writes to drain. But it obviously does not work
* when O_NONBLOCK is set. So, applications setting O_NONBLOCK must use
* select(2) or poll(2) to wait for the buffer to drain before closing.
* Alternatively, set blocking mode with fcntl and issue a zero-size write.
*/
static int usblp_wwait(struct usblp *usblp, int nonblock)
{
DECLARE_WAITQUEUE(waita, current);
int rc;
int err = 0;
add_wait_queue(&usblp->wwait, &waita);
for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
if (mutex_lock_interruptible(&usblp->mut)) {
rc = -EINTR;
break;
}
rc = usblp_wtest(usblp, nonblock);
mutex_unlock(&usblp->mut);
if (rc <= 0)
break;
if (usblp->flags & LP_ABORT) {
if (schedule_timeout(msecs_to_jiffies(5000)) == 0) {
err = usblp_check_status(usblp, err);
if (err == 1) { /* Paper out */
rc = -ENOSPC;
break;
}
}
} else {
schedule();
}
}
set_current_state(TASK_RUNNING);
remove_wait_queue(&usblp->wwait, &waita);
return rc;
}
static ssize_t usblp_write(struct file *file, const char *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
int timeout, err = 0, writecount = 0;
while (writecount < count) {
if (usblp->writeurb.status == -EINPROGRESS) {
if (file->f_flags & O_NONBLOCK)
return -EAGAIN;
timeout = USBLP_WRITE_TIMEOUT;
while (timeout && usblp->writeurb.status == -EINPROGRESS) {
if (signal_pending(current))
return writecount ? writecount : -EINTR;
timeout = interruptible_sleep_on_timeout(&usblp->wait, timeout);
}
}
if (!usblp->dev)
return -ENODEV;
if (usblp->writeurb.status) {
if (usblp->quirks & USBLP_QUIRK_BIDIR) {
if (usblp->writeurb.status != -EINPROGRESS)
err("usblp%d: error %d writing to printer",
usblp->minor, usblp->writeurb.status);
err = usblp->writeurb.status;
continue;
}
else {
err = usblp_check_status(usblp, err);
continue;
}
}
writecount += usblp->writeurb.transfer_buffer_length;
usblp->writeurb.transfer_buffer_length = 0;
if (writecount == count)
continue;
usblp->writeurb.transfer_buffer_length = (count - writecount) < USBLP_BUF_SIZE ?
(count - writecount) : USBLP_BUF_SIZE;
if (copy_from_user(usblp->writeurb.transfer_buffer, buffer + writecount,
usblp->writeurb.transfer_buffer_length)) return -EFAULT;
usblp->writeurb.dev = usblp->dev;
usb_submit_urb(&usblp->writeurb);
}
return count;
}
static int usblp_open(struct inode *inode, struct file *file)
{
int minor = MINOR(inode->i_rdev) - USBLP_MINOR_BASE;
struct usblp *usblp;
int retval;
if (minor < 0 || minor >= USBLP_MINORS)
return -ENODEV;
down (&usblp_sem);
usblp = usblp_table[minor];
retval = -ENODEV;
if (!usblp || !usblp->dev || !usblp->present)
goto out;
retval = -EBUSY;
if (usblp->used)
goto out;
/*
* TODO: need to implement LP_ABORTOPEN + O_NONBLOCK as in drivers/char/lp.c ???
* This is #if 0-ed because we *don't* want to fail an open
* just because the printer is off-line.
*/
#if 0
if ((retval = usblp_check_status(usblp, 0))) {
retval = retval > 1 ? -EIO : -ENOSPC;
goto out;
}
#else
retval = 0;
#endif
usblp->used = 1;
file->private_data = usblp;
usblp->writeurb->transfer_buffer_length = 0;
usblp->wcomplete = 1; /* we begin writeable */
usblp->rcomplete = 0;
if (usblp->bidir) {
usblp->readcount = 0;
usblp->readurb->dev = usblp->dev;
if (usb_submit_urb(usblp->readurb) < 0) {
retval = -EIO;
usblp->used = 0;
file->private_data = NULL;
}
}
out:
up (&usblp_sem);
return retval;
}
static int usblp_open( struct usblp *usblp )
{
int retval;
// lock_kernel();
retval = -ENODEV;
if (!usblp || !usblp->dev)
goto out;
retval = -EBUSY;
if (usblp->used)
goto out;
/*
* TODO: need to implement LP_ABORTOPEN + O_NONBLOCK as in drivers/char/lp.c ???
* This is #if 0-ed because we *don't* want to fail an open
* just because the printer is off-line.
*/
#if 0
if ((retval = usblp_check_status(usblp, 0))) {
retval = retval > 1 ? -EIO : -ENOSPC;
goto out;
}
#else
retval = 0;
#endif
usblp->used = 1;
// file->private_data = usblp;
usblp->writeurb.transfer_buffer_length = 0;
usblp->writeurb.status = 0;
#ifdef SUPPORT_PRN_COUNT
if (usblp->bidir) {
usblp->readcount = 0;
usblp->readurb.dev = usblp->dev;
// usblp->readurb.transfer_buffer_length = usb_maxpacket (usblp->readurb.dev, usblp->readurb.pipe, usb_pipeout (usblp->readurb.pipe));
if( usb_submit_urb(&usblp->readurb) < 0 ) {
retval = -EIO;
usblp->used = 0;
}
}
#endif //SUPPORT_PRN_COUNT
out:
// unlock_kernel();
return retval;
}
static int usblp_open(struct inode *inode, struct file *file)
{
int minor = MINOR(inode->i_rdev) - USBLP_MINOR_BASE;
struct usblp *usblp;
int retval;
if (minor < 0 || minor >= USBLP_MINORS)
return -ENODEV;
lock_kernel();
usblp = usblp_table[minor];
retval = -ENODEV;
if (!usblp || !usblp->dev)
goto out;
retval = -EBUSY;
if (usblp->used)
goto out;
if ((retval = usblp_check_status(usblp, 0))) {
retval = retval > 1 ? -EIO : -ENOSPC;
goto out;
}
usblp->used = 1;
file->private_data = usblp;
usblp->writeurb.transfer_buffer_length = 0;
usblp->writeurb.status = 0;
if (usblp->bidir) {
usblp->readcount = 0;
usb_submit_urb(&usblp->readurb);
}
out:
unlock_kernel();
return retval;
}
static void *usblp_probe(struct usb_device *dev, unsigned int ifnum)
{
struct usb_interface_descriptor *interface;
struct usb_endpoint_descriptor *epread, *epwrite;
struct usblp *usblp;
int minor, i, alts = -1, bidir = 0;
int length, err;
char *buf;
for (i = 0; i < dev->actconfig->interface[ifnum].num_altsetting; i++) {
interface = &dev->actconfig->interface[ifnum].altsetting[i];
if (interface->bInterfaceClass != 7 || interface->bInterfaceSubClass != 1 ||
interface->bInterfaceProtocol < 1 || interface->bInterfaceProtocol > 3 ||
(interface->bInterfaceProtocol > 1 && interface->bNumEndpoints < 2))
continue;
if (alts == -1)
alts = i;
if (!bidir && interface->bInterfaceProtocol > 1) {
bidir = 1;
alts = i;
}
}
if (alts == -1)
return NULL;
interface = &dev->actconfig->interface[ifnum].altsetting[alts];
if (usb_set_interface(dev, ifnum, alts))
err("can't set desired altsetting %d on interface %d", alts, ifnum);
epwrite = interface->endpoint + 0;
epread = bidir ? interface->endpoint + 1 : NULL;
if ((epwrite->bEndpointAddress & 0x80) == 0x80) {
if (interface->bNumEndpoints == 1)
return NULL;
epwrite = interface->endpoint + 1;
epread = bidir ? interface->endpoint + 0 : NULL;
}
if ((epwrite->bEndpointAddress & 0x80) == 0x80)
return NULL;
if (bidir && (epread->bEndpointAddress & 0x80) != 0x80)
return NULL;
for (minor = 0; minor < USBLP_MINORS && usblp_table[minor]; minor++);
if (usblp_table[minor]) {
err("no more free usblp devices");
return NULL;
}
if (!(usblp = kmalloc(sizeof(struct usblp), GFP_KERNEL))) {
err("out of memory");
return NULL;
}
memset(usblp, 0, sizeof(struct usblp));
usblp->dev = dev;
usblp->ifnum = ifnum;
usblp->minor = minor;
usblp->bidir = bidir;
init_waitqueue_head(&usblp->wait);
if (!(buf = kmalloc(USBLP_BUF_SIZE * (bidir ? 2 : 1), GFP_KERNEL))) {
err("out of memory");
kfree(usblp);
return NULL;
}
if (!(usblp->device_id_string = kmalloc(DEVICE_ID_SIZE, GFP_KERNEL))) {
err("out of memory");
kfree(usblp);
kfree(buf);
return NULL;
}
FILL_BULK_URB(&usblp->writeurb, dev, usb_sndbulkpipe(dev, epwrite->bEndpointAddress),
buf, 0, usblp_bulk, usblp);
if (bidir)
FILL_BULK_URB(&usblp->readurb, dev, usb_rcvbulkpipe(dev, epread->bEndpointAddress),
buf + USBLP_BUF_SIZE, USBLP_BUF_SIZE, usblp_bulk, usblp);
/* Get the device_id string if possible. FIXME: Could make this kmalloc(length). */
err = usblp_get_id(usblp, 0, usblp->device_id_string, DEVICE_ID_SIZE - 1);
if (err >= 0) {
length = (usblp->device_id_string[0] << 8) + usblp->device_id_string[1]; /* big-endian */
if (length < DEVICE_ID_SIZE)
usblp->device_id_string[length] = '\0';
else
usblp->device_id_string[DEVICE_ID_SIZE - 1] = '\0';
dbg ("usblp%d Device ID string [%d]=%s",
minor, length, &usblp->device_id_string[2]);
}
else {
err ("usblp%d: error = %d reading IEEE-1284 Device ID string",
minor, err);
usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
}
#ifdef DEBUG
usblp_check_status(usblp);
#endif
info("usblp%d: USB %sdirectional printer dev %d if %d alt %d",
minor, bidir ? "Bi" : "Uni", dev->devnum, ifnum, alts);
return usblp_table[minor] = usblp;
}
static void *usblp_probe(struct usb_device *dev, unsigned int ifnum,
const struct usb_device_id *id)
{
struct usb_interface_descriptor *interface;
struct usb_endpoint_descriptor *epread, *epwrite;
struct usblp *usblp;
int minor, i, bidir = 0, quirks;
int alts = dev->actconfig->interface[ifnum].act_altsetting;
int length, err;
char *buf;
char name[6];
/* If a bidirectional interface exists, use it. */
for (i = 0; i < dev->actconfig->interface[ifnum].num_altsetting; i++) {
interface = &dev->actconfig->interface[ifnum].altsetting[i];
if (interface->bInterfaceClass != 7 || interface->bInterfaceSubClass != 1 ||
interface->bInterfaceProtocol < 1 || interface->bInterfaceProtocol > 3 ||
(interface->bInterfaceProtocol > 1 && interface->bNumEndpoints < 2))
continue;
if (interface->bInterfaceProtocol > 1) {
bidir = 1;
alts = i;
break;
}
}
interface = &dev->actconfig->interface[ifnum].altsetting[alts];
if (usb_set_interface(dev, ifnum, alts))
err("can't set desired altsetting %d on interface %d", alts, ifnum);
epwrite = interface->endpoint + 0;
epread = bidir ? interface->endpoint + 1 : NULL;
if ((epwrite->bEndpointAddress & 0x80) == 0x80) {
if (interface->bNumEndpoints == 1)
return NULL;
epwrite = interface->endpoint + 1;
epread = bidir ? interface->endpoint + 0 : NULL;
}
if ((epwrite->bEndpointAddress & 0x80) == 0x80)
return NULL;
if (bidir && (epread->bEndpointAddress & 0x80) != 0x80)
return NULL;
for (minor = 0; minor < USBLP_MINORS && usblp_table[minor]; minor++);
if (usblp_table[minor]) {
err("no more free usblp devices");
return NULL;
}
if (!(usblp = kmalloc(sizeof(struct usblp), GFP_KERNEL))) {
err("out of memory");
return NULL;
}
memset(usblp, 0, sizeof(struct usblp));
init_MUTEX (&usblp->sem);
/* lookup quirks for this printer */
quirks = usblp_quirks(dev->descriptor.idVendor, dev->descriptor.idProduct);
if (bidir && (quirks & USBLP_QUIRK_BIDIR)) {
bidir = 0;
epread = NULL;
info ("Disabling reads from problem bidirectional printer on usblp%d",
minor);
}
usblp->dev = dev;
usblp->ifnum = ifnum;
usblp->minor = minor;
usblp->bidir = bidir;
usblp->quirks = quirks;
init_waitqueue_head(&usblp->wait);
if (!(buf = kmalloc(USBLP_BUF_SIZE * (bidir ? 2 : 1), GFP_KERNEL))) {
err("out of memory");
kfree(usblp);
return NULL;
}
if (!(usblp->device_id_string = kmalloc(DEVICE_ID_SIZE, GFP_KERNEL))) {
err("out of memory");
kfree(usblp);
kfree(buf);
return NULL;
}
FILL_BULK_URB(&usblp->writeurb, dev, usb_sndbulkpipe(dev, epwrite->bEndpointAddress),
buf, 0, usblp_bulk, usblp);
if (bidir)
FILL_BULK_URB(&usblp->readurb, dev, usb_rcvbulkpipe(dev, epread->bEndpointAddress),
buf + USBLP_BUF_SIZE, USBLP_BUF_SIZE, usblp_bulk, usblp);
/* Get the device_id string if possible. FIXME: Could make this kmalloc(length). */
err = usblp_get_id(usblp, 0, usblp->device_id_string, DEVICE_ID_SIZE - 1);
if (err >= 0) {
length = (usblp->device_id_string[0] << 8) + usblp->device_id_string[1]; /* big-endian */
if (length < DEVICE_ID_SIZE)
usblp->device_id_string[length] = '\0';
else
usblp->device_id_string[DEVICE_ID_SIZE - 1] = '\0';
dbg ("usblp%d Device ID string [%d]=%s",
minor, length, &usblp->device_id_string[2]);
}
else {
err ("usblp%d: error = %d reading IEEE-1284 Device ID string",
minor, err);
usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
}
#ifdef DEBUG
usblp_check_status(usblp, 0);
#endif
sprintf(name, "lp%d", minor);
/* if we have devfs, create with perms=660 */
usblp->devfs = devfs_register(usb_devfs_handle, name,
DEVFS_FL_DEFAULT, USB_MAJOR,
USBLP_MINOR_BASE + minor,
S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP |
S_IWGRP, &usblp_fops, NULL);
info("usblp%d: USB %sdirectional printer dev %d if %d alt %d",
minor, bidir ? "Bi" : "Uni", dev->devnum, ifnum, alts);
return usblp_table[minor] = usblp;
}
static ssize_t usblp_write(struct file *file, const char *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
int timeout, err = 0, writecount = 0;
while (writecount < count) {
// FIXME: only use urb->status inside completion
// callbacks; this way is racey...
if (usblp->writeurb.status == -EINPROGRESS) {
if (file->f_flags & O_NONBLOCK)
return -EAGAIN;
timeout = USBLP_WRITE_TIMEOUT;
while (timeout && usblp->writeurb.status == -EINPROGRESS) {
if (signal_pending(current))
return writecount ? writecount : -EINTR;
timeout = interruptible_sleep_on_timeout(&usblp->wait, timeout);
}
}
down (&usblp->sem);
if (!usblp->dev) {
up (&usblp->sem);
return -ENODEV;
}
if (usblp->writeurb.status != 0) {
if (usblp->quirks & USBLP_QUIRK_BIDIR) {
if (usblp->writeurb.status != -EINPROGRESS)
err("usblp%d: error %d writing to printer",
usblp->minor, usblp->writeurb.status);
err = usblp->writeurb.status;
} else
err = usblp_check_status(usblp, err);
up (&usblp->sem);
/* if the fault was due to disconnect, let khubd's
* call to usblp_disconnect() grab usblp->sem ...
*/
schedule ();
continue;
}
writecount += usblp->writeurb.transfer_buffer_length;
usblp->writeurb.transfer_buffer_length = 0;
if (writecount == count) {
up (&usblp->sem);
break;
}
usblp->writeurb.transfer_buffer_length = (count - writecount) < USBLP_BUF_SIZE ?
(count - writecount) : USBLP_BUF_SIZE;
if (copy_from_user(usblp->writeurb.transfer_buffer, buffer + writecount,
usblp->writeurb.transfer_buffer_length)) return -EFAULT;
usblp->writeurb.dev = usblp->dev;
usb_submit_urb(&usblp->writeurb);
up (&usblp->sem);
}
return count;
}
static void *usblp_probe(struct usb_device *dev, unsigned int ifnum,
const struct usb_device_id *id)
{
struct usblp *usblp = 0;
int protocol;
char name[6];
/* Malloc and start initializing usblp structure so we can use it
* directly. */
if (!(usblp = kmalloc(sizeof(struct usblp), GFP_KERNEL))) {
err("out of memory for usblp");
goto abort;
}
memset(usblp, 0, sizeof(struct usblp));
usblp->dev = dev;
init_MUTEX (&usblp->sem);
init_waitqueue_head(&usblp->wait);
usblp->ifnum = ifnum;
/* Look for a free usblp_table entry. */
while (usblp_table[usblp->minor]) {
usblp->minor++;
if (usblp->minor >= USBLP_MINORS) {
err("no more free usblp devices");
goto abort;
}
}
usblp->writeurb = usb_alloc_urb(0);
if (!usblp->writeurb) {
err("out of memory");
goto abort;
}
usblp->readurb = usb_alloc_urb(0);
if (!usblp->readurb) {
err("out of memory");
goto abort;
}
/* Malloc device ID string buffer to the largest expected length,
* since we can re-query it on an ioctl and a dynamic string
* could change in length. */
if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
err("out of memory for device_id_string");
goto abort;
}
usblp->writebuf = usblp->readbuf = NULL;
/* Malloc write & read buffers. We somewhat wastefully
* malloc both regardless of bidirectionality, because the
* alternate setting can be changed later via an ioctl. */
if (!(usblp->writebuf = kmalloc(USBLP_BUF_SIZE, GFP_KERNEL))) {
err("out of memory for write buf");
goto abort;
}
if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE, GFP_KERNEL))) {
err("out of memory for read buf");
goto abort;
}
/* Allocate buffer for printer status */
usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
if (!usblp->statusbuf) {
err("out of memory for statusbuf");
goto abort;
}
/* Lookup quirks for this printer. */
usblp->quirks = usblp_quirks(
dev->descriptor.idVendor,
dev->descriptor.idProduct);
/* Analyze and pick initial alternate settings and endpoints. */
protocol = usblp_select_alts(usblp);
if (protocol < 0) {
dbg("incompatible printer-class device 0x%4.4X/0x%4.4X",
dev->descriptor.idVendor,
dev->descriptor.idProduct);
goto abort;
}
/* Setup the selected alternate setting and endpoints. */
if (usblp_set_protocol(usblp, protocol) < 0)
goto abort;
/* Retrieve and store the device ID string. */
usblp_cache_device_id_string(usblp);
#ifdef DEBUG
usblp_check_status(usblp, 0);
#endif
usblp_table[usblp->minor] = usblp;
/* If we have devfs, create with perms=660. */
sprintf(name, "lp%d", usblp->minor);
usblp->devfs = devfs_register(usb_devfs_handle, name,
DEVFS_FL_DEFAULT, USB_MAJOR,
USBLP_MINOR_BASE + usblp->minor,
S_IFCHR | S_IRUSR | S_IWUSR | S_IRGRP |
S_IWGRP, &usblp_fops, NULL);
info("usblp%d: USB %sdirectional printer dev %d "
"if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X",
usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
usblp->ifnum,
usblp->protocol[usblp->current_protocol].alt_setting,
usblp->current_protocol, usblp->dev->descriptor.idVendor,
usblp->dev->descriptor.idProduct);
usblp->present = 1;
return usblp;
abort:
if (usblp) {
if (usblp->writebuf)
kfree (usblp->writebuf);
if (usblp->readbuf)
kfree (usblp->readbuf);
kfree(usblp->statusbuf);
kfree(usblp->device_id_string);
usb_free_urb(usblp->writeurb);
usb_free_urb(usblp->readurb);
kfree(usblp);
}
return NULL;
}
static ssize_t usblp_write(struct file *file, const char *buffer, size_t count, loff_t *ppos)
{
DECLARE_WAITQUEUE(wait, current);
struct usblp *usblp = file->private_data;
int timeout, err = 0, transfer_length = 0;
size_t writecount = 0;
while (writecount < count) {
if (!usblp->wcomplete) {
barrier();
if (file->f_flags & O_NONBLOCK) {
writecount += transfer_length;
return writecount ? writecount : -EAGAIN;
}
timeout = USBLP_WRITE_TIMEOUT;
add_wait_queue(&usblp->wait, &wait);
while ( 1==1 ) {
if (signal_pending(current)) {
remove_wait_queue(&usblp->wait, &wait);
return writecount ? writecount : -EINTR;
}
set_current_state(TASK_INTERRUPTIBLE);
if (timeout && !usblp->wcomplete) {
timeout = schedule_timeout(timeout);
} else {
set_current_state(TASK_RUNNING);
break;
}
}
remove_wait_queue(&usblp->wait, &wait);
}
down (&usblp->sem);
if (!usblp->present) {
up (&usblp->sem);
return -ENODEV;
}
if (usblp->writeurb->status != 0) {
if (usblp->quirks & USBLP_QUIRK_BIDIR) {
if (!usblp->wcomplete)
err("usblp%d: error %d writing to printer",
usblp->minor, usblp->writeurb->status);
err = usblp->writeurb->status;
} else
err = usblp_check_status(usblp, err);
up (&usblp->sem);
/* if the fault was due to disconnect, let khubd's
* call to usblp_disconnect() grab usblp->sem ...
*/
schedule ();
continue;
}
/* We must increment writecount here, and not at the
* end of the loop. Otherwise, the final loop iteration may
* be skipped, leading to incomplete printer output.
*/
writecount += transfer_length;
if (writecount == count) {
up (&usblp->sem);
break;
}
transfer_length = count - writecount;
if(transfer_length > USBLP_BUF_SIZE)
transfer_length = USBLP_BUF_SIZE;
usblp->writeurb->transfer_buffer_length = transfer_length;
if (copy_from_user(usblp->writeurb->transfer_buffer,
buffer + writecount, transfer_length)) {
up(&usblp->sem);
return writecount ? writecount : -EFAULT;
}
usblp->writeurb->dev = usblp->dev;
usblp->wcomplete = 0;
err = usb_submit_urb(usblp->writeurb);
if (err) {
usblp->wcomplete = 1;
if (err != -ENOMEM)
count = -EIO;
else
count = writecount ? writecount : -ENOMEM;
up (&usblp->sem);
break;
}
up (&usblp->sem);
}
return count;
}
static ssize_t usblp_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos)
{
struct usblp *usblp = file->private_data;
int timeout, rv, err = 0, transfer_length = 0;
size_t writecount = 0;
while (writecount < count) {
if (!usblp->wcomplete) {
barrier();
if (file->f_flags & O_NONBLOCK) {
writecount += transfer_length;
return writecount ? writecount : -EAGAIN;
}
timeout = USBLP_WRITE_TIMEOUT;
rv = wait_event_interruptible_timeout(usblp->wait, usblp->wcomplete || !usblp->present , timeout);
if (rv < 0)
return writecount ? writecount : -EINTR;
}
down (&usblp->sem);
if (!usblp->present) {
up (&usblp->sem);
return -ENODEV;
}
if (usblp->writeurb->status != 0) {
if (usblp->quirks & USBLP_QUIRK_BIDIR) {
if (!usblp->wcomplete)
err("usblp%d: error %d writing to printer",
usblp->minor, usblp->writeurb->status);
err = usblp->writeurb->status;
} else
err = usblp_check_status(usblp, err);
up (&usblp->sem);
/* if the fault was due to disconnect, let khubd's
* call to usblp_disconnect() grab usblp->sem ...
*/
schedule ();
continue;
}
/* We must increment writecount here, and not at the
* end of the loop. Otherwise, the final loop iteration may
* be skipped, leading to incomplete printer output.
*/
writecount += transfer_length;
if (writecount == count) {
up(&usblp->sem);
break;
}
transfer_length=(count - writecount);
if (transfer_length > USBLP_BUF_SIZE)
transfer_length = USBLP_BUF_SIZE;
usblp->writeurb->transfer_buffer_length = transfer_length;
if (copy_from_user(usblp->writeurb->transfer_buffer,
buffer + writecount, transfer_length)) {
up(&usblp->sem);
return writecount ? writecount : -EFAULT;
}
usblp->writeurb->dev = usblp->dev;
usblp->wcomplete = 0;
err = usb_submit_urb(usblp->writeurb, GFP_KERNEL);
if (err) {
if (err != -ENOMEM)
count = -EIO;
else
count = writecount ? writecount : -ENOMEM;
up (&usblp->sem);
break;
}
up (&usblp->sem);
}
return count;
}
static int usblp_open(struct inode *inode, struct file *file)
{
int minor = iminor(inode);
struct usblp *usblp;
struct usb_interface *intf;
int retval;
if (minor < 0)
return -ENODEV;
down (&usblp_sem);
retval = -ENODEV;
intf = usb_find_interface(&usblp_driver, minor);
if (!intf) {
goto out;
}
usblp = usb_get_intfdata (intf);
if (!usblp || !usblp->dev || !usblp->present)
goto out;
retval = -EBUSY;
if (usblp->used)
goto out;
/*
* TODO: need to implement LP_ABORTOPEN + O_NONBLOCK as in drivers/char/lp.c ???
* This is #if 0-ed because we *don't* want to fail an open
* just because the printer is off-line.
*/
#if 0
if ((retval = usblp_check_status(usblp, 0))) {
retval = retval > 1 ? -EIO : -ENOSPC;
goto out;
}
#else
retval = 0;
#endif
usblp->used = 1;
file->private_data = usblp;
usblp->writeurb->transfer_buffer_length = 0;
usblp->wcomplete = 1; /* we begin writeable */
usblp->rcomplete = 0;
usblp->writeurb->status = 0;
usblp->readurb->status = 0;
if (usblp->bidir) {
usblp->readcount = 0;
usblp->readurb->dev = usblp->dev;
if (usb_submit_urb(usblp->readurb, GFP_KERNEL) < 0) {
retval = -EIO;
usblp->used = 0;
file->private_data = NULL;
}
}
out:
up (&usblp_sem);
return retval;
}
static int usblp_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
{
struct usblp *usblp = file->private_data;
struct parport_splink_device_info prn_info_tmp, *prn_info; // Added by PaN
struct print_buffer user_buf_tmp, *user_buf; // Added by PaN
char *strtmp, *str_dev_id, *strunknown="unknown"; // Added by PaN
//int i, unk=0; // Added by PaN
int unk=0; // Added by PaN ---remove declaration of i for i is declared below: JY
int length, err, i;
unsigned char lpstatus, newChannel;
int status;
int twoints[2];
int retval = 0;
prn_info= &prn_info_tmp; // Added by PaN
down (&usblp->sem);
if (!usblp->dev) {
retval = -ENODEV;
goto done;
}
if (_IOC_TYPE(cmd) == 'P') /* new-style ioctl number */
switch (_IOC_NR(cmd)) {
case IOCNR_GET_DEVICE_ID: /* get the DEVICE_ID string */
if (_IOC_DIR(cmd) != _IOC_READ) {
retval = -EINVAL;
goto done;
}
length = usblp_cache_device_id_string(usblp);
if (length < 0) {
retval = length;
goto done;
}
if (length > _IOC_SIZE(cmd))
length = _IOC_SIZE(cmd); /* truncate */
if (copy_to_user((unsigned char *) arg,
usblp->device_id_string,
(unsigned long) length)) {
retval = -EFAULT;
goto done;
}
break;
case IOCNR_GET_PROTOCOLS:
if (_IOC_DIR(cmd) != _IOC_READ ||
_IOC_SIZE(cmd) < sizeof(twoints)) {
retval = -EINVAL;
goto done;
}
twoints[0] = usblp->current_protocol;
twoints[1] = 0;
for (i = USBLP_FIRST_PROTOCOL;
i <= USBLP_LAST_PROTOCOL; i++) {
if (usblp->protocol[i].alt_setting >= 0)
twoints[1] |= (1<<i);
}
if (copy_to_user((unsigned char *)arg,
(unsigned char *)twoints,
sizeof(twoints))) {
retval = -EFAULT;
goto done;
}
break;
case IOCNR_SET_PROTOCOL:
if (_IOC_DIR(cmd) != _IOC_WRITE) {
retval = -EINVAL;
goto done;
}
#ifdef DEBUG
if (arg == -10) {
usblp_dump(usblp);
break;
}
#endif
usblp_unlink_urbs(usblp);
retval = usblp_set_protocol(usblp, arg);
if (retval < 0) {
usblp_set_protocol(usblp,
usblp->current_protocol);
}
break;
case IOCNR_HP_SET_CHANNEL:
if (_IOC_DIR(cmd) != _IOC_WRITE ||
usblp->dev->descriptor.idVendor != 0x03F0 ||
usblp->quirks & USBLP_QUIRK_BIDIR) {
retval = -EINVAL;
goto done;
}
err = usblp_hp_channel_change_request(usblp,
arg, &newChannel);
if (err < 0) {
err("usblp%d: error = %d setting "
"HP channel",
usblp->minor, err);
retval = -EIO;
goto done;
}
dbg("usblp%d requested/got HP channel %ld/%d",
usblp->minor, arg, newChannel);
break;
case IOCNR_GET_BUS_ADDRESS:
if (_IOC_DIR(cmd) != _IOC_READ ||
_IOC_SIZE(cmd) < sizeof(twoints)) {
retval = -EINVAL;
goto done;
}
twoints[0] = usblp->dev->bus->busnum;
twoints[1] = usblp->dev->devnum;
if (copy_to_user((unsigned char *)arg,
(unsigned char *)twoints,
sizeof(twoints))) {
retval = -EFAULT;
goto done;
}
dbg("usblp%d is bus=%d, device=%d",
usblp->minor, twoints[0], twoints[1]);
break;
case IOCNR_GET_VID_PID:
if (_IOC_DIR(cmd) != _IOC_READ ||
_IOC_SIZE(cmd) < sizeof(twoints)) {
retval = -EINVAL;
goto done;
}
twoints[0] = usblp->dev->descriptor.idVendor;
twoints[1] = usblp->dev->descriptor.idProduct;
if (copy_to_user((unsigned char *)arg,
(unsigned char *)twoints,
sizeof(twoints))) {
retval = -EFAULT;
goto done;
}
dbg("usblp%d is VID=0x%4.4X, PID=0x%4.4X",
usblp->minor, twoints[0], twoints[1]);
break;
default:
retval = -EINVAL;
}
else /* old-style ioctl value */
switch (cmd) {
/*=================================================================================== PaN */
case LPGETID: /* get the DEVICE_ID string */
err = usblp_get_id(usblp, 0, usblp->device_id_string, DEVICE_ID_SIZE - 1);
if (err < 0) {
dbg ("usblp%d: error = %d reading IEEE-1284 Device ID string",
usblp->minor, err);
usblp->device_id_string[0] = usblp->device_id_string[1] = '\0';
retval = -EIO;
goto done;
}
length = (usblp->device_id_string[0] << 8) + usblp->device_id_string[1]; /* big-endian */
if (length < DEVICE_ID_SIZE)
usblp->device_id_string[length] = '\0';
else
usblp->device_id_string[DEVICE_ID_SIZE - 1] = '\0';
dbg ("usblp%d Device ID string [%d/max %d]='%s'",
usblp->minor, length, cmd, &usblp->device_id_string[2]);
info ("usblp%d Device ID string [%d/max %d]='%s'",
usblp->minor, length, cmd, &usblp->device_id_string[2]);
str_dev_id = &usblp->device_id_string[2];
if ( (strtmp = strstr(str_dev_id, "MFG:")) == NULL) {
if ( (strtmp = strstr(str_dev_id, "MANUFACTURE:")) == NULL) {
for (i=0; i<7; i++) {
prn_info->mfr[i]= strunknown[i];
usblpid_info.mfr[i] = strunknown[i];
}
prn_info->mfr[i]= '\0';
usblpid_info.mfr[i]='\0';
unk=1;
}
else
strtmp+=12;
}
else
strtmp+=4;
i=0;
while (strtmp[i] != ';' && unk==0) {
prn_info->mfr[i]= strtmp[i];
usblpid_info.mfr[i] = strtmp[i];
i++;
}
prn_info->mfr[i]= '\0';
usblpid_info.mfr[i]='\0';
unk=0;
if ( (strtmp = strstr(str_dev_id, "MDL:")) == NULL) {
if ( (strtmp = strstr(str_dev_id, "MODEL:")) == NULL) {
for (i=0; i<7; i++) {
prn_info->model[i]= strunknown[i];
usblpid_info.model[i] = strunknown[i];
}
prn_info->model[i]= '\0';
usblpid_info.model[i]='\0';
unk=1;
}
else
strtmp+=6;
}
else
strtmp+=4;
i=0;
while (strtmp[i] != ';' && unk==0) {
prn_info->model[i]= strtmp[i];
usblpid_info.model[i] = strtmp[i];
i++;
}
prn_info->model[i]= '\0';
usblpid_info.model[i]='\0';
unk=0;
if ( (strtmp = strstr(str_dev_id, "CLS:")) == NULL) {
if ( (strtmp = strstr(str_dev_id, "CLASS:")) == NULL) {
for (i=0; i<7; i++) {
prn_info->class_name[i]= strunknown[i];
usblpid_info.class_name[i] = strunknown[i];
}
prn_info->class_name[i]= '\0';
usblpid_info.class_name[i]='\0';
unk=1;
}
else
strtmp+=6;
}
else
strtmp+=4;
i=0;
while (strtmp[i] != ';' && unk==0) {
prn_info->class_name[i]= strtmp[i];
usblpid_info.class_name[i]= strtmp[i];
i++;
}
prn_info->class_name[i]= '\0';
usblpid_info.class_name[i]='\0';
unk=0;
if ( (strtmp = strstr(str_dev_id, "DES:")) == NULL) {
if ( (strtmp = strstr(str_dev_id, "DESCRIPTION:")) == NULL) {
for (i=0; i<7; i++) {
prn_info->description[i]= strunknown[i];
usblpid_info.description[i] = strunknown[i];
}
prn_info->description[i]= '\0';
usblpid_info.description[i]='\0';
unk=1;
}
else
strtmp+=12;
}
else
strtmp+=4;
i=0;
while (strtmp[i] != ';' && unk==0) {
prn_info->description[i]= strtmp[i];
usblpid_info.description[i]= strtmp[i];
i++;
}
prn_info->description[i]= '\0';
usblpid_info.description[i]='\0';
info("Parsing USBLPID...");
if (copy_to_user((unsigned char *) arg,
prn_info, (unsigned long) length)) {
retval = -EFAULT;
goto done;
}
break;
case LPREADDATA:
up (&usblp->sem);
user_buf = (struct print_buffer *)arg;
retval = usblp_read(file, user_buf->buf, user_buf->len, NULL);
down (&usblp->sem);
break;
case LPWRITEDATA:
up (&usblp->sem);
user_buf = (struct print_buffer *)arg;
retval = usblp_write(file, user_buf->buf, user_buf->len, NULL);
down (&usblp->sem);
break;
case LPRESET:
usblp_reset(usblp);
break;
case LPGETSTATUS:
/* OLD USB Code Removed by PaN for Printer Server
if (usblp_read_status(usblp, &status)) {
err("usblp%d: failed reading printer status", usblp->minor);
retval = -EIO;
goto done;
}
if (copy_to_user ((int *)arg, &status, 2))
retval = -EFAULT;
*/
status = usblp_check_status(usblp, 0);
#if 0
info("start=%s", usblpid_info.mfr);
for (i=0; i< MAX_STATUS_TYPE; i++) {
info("compare=%s", usblp_status_type[i]);
if ( !( strcmp(usblpid_info.mfr, usblp_status_type[i]) ) )
break;
}
info("%d=%s", i, usblp_status_type[i]);
status=usblp_status_maping[i][status];
info("STATUS=%x", status);
#endif
status=0;
if (copy_to_user ((int *)arg, &status, 2))
retval = -EFAULT;
break;
/*=================================================================== PaN for Printer Server */
/* Marked by JY 20031118*/
#if 0
case LPGETSTATUS:
if (usblp_read_status(usblp, &lpstatus)) {
err("usblp%d: failed reading printer status", usblp->minor);
retval = -EIO;
goto done;
}
status = lpstatus;
if (copy_to_user ((int *)arg, &status, sizeof(int)))
retval = -EFAULT;
break;
#endif
/* Marked by JY 20031118*/
default:
retval = -EINVAL;
}
done:
up (&usblp->sem);
return retval;
}
static int usblp_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usblp *usblp;
int protocol;
int retval;
/* Malloc and start initializing usblp structure so we can use it
* directly. */
usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL);
if (!usblp) {
retval = -ENOMEM;
goto abort_ret;
}
usblp->dev = dev;
mutex_init(&usblp->wmut);
mutex_init(&usblp->mut);
spin_lock_init(&usblp->lock);
init_waitqueue_head(&usblp->rwait);
init_waitqueue_head(&usblp->wwait);
init_usb_anchor(&usblp->urbs);
usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
usblp->intf = intf;
/* Malloc device ID string buffer to the largest expected length,
* since we can re-query it on an ioctl and a dynamic string
* could change in length. */
if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
retval = -ENOMEM;
goto abort;
}
/*
* Allocate read buffer. We somewhat wastefully
* malloc both regardless of bidirectionality, because the
* alternate setting can be changed later via an ioctl.
*/
if (!(usblp->readbuf = kmalloc(USBLP_BUF_SIZE_IN, GFP_KERNEL))) {
retval = -ENOMEM;
goto abort;
}
/* Allocate buffer for printer status */
usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
if (!usblp->statusbuf) {
retval = -ENOMEM;
goto abort;
}
/* Lookup quirks for this printer. */
usblp->quirks = usblp_quirks(
le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
/* Analyze and pick initial alternate settings and endpoints. */
protocol = usblp_select_alts(usblp);
if (protocol < 0) {
dbg("incompatible printer-class device 0x%4.4X/0x%4.4X",
le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
retval = -ENODEV;
goto abort;
}
/* Setup the selected alternate setting and endpoints. */
if (usblp_set_protocol(usblp, protocol) < 0) {
retval = -ENODEV; /* ->probe isn't ->ioctl */
goto abort;
}
/* Retrieve and store the device ID string. */
usblp_cache_device_id_string(usblp);
retval = device_create_file(&intf->dev, &dev_attr_ieee1284_id);
if (retval)
goto abort_intfdata;
#ifdef DEBUG
usblp_check_status(usblp, 0);
#endif
usb_set_intfdata(intf, usblp);
usblp->present = 1;
retval = usb_register_dev(intf, &usblp_class);
if (retval) {
printk(KERN_ERR "usblp: Not able to get a minor"
" (base %u, slice default): %d\n",
USBLP_MINOR_BASE, retval);
goto abort_intfdata;
}
usblp->minor = intf->minor;
printk(KERN_INFO "usblp%d: USB %sdirectional printer dev %d "
"if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X\n",
usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
usblp->ifnum,
usblp->protocol[usblp->current_protocol].alt_setting,
usblp->current_protocol,
le16_to_cpu(usblp->dev->descriptor.idVendor),
le16_to_cpu(usblp->dev->descriptor.idProduct));
/* Added by PaN */
/* create directory */
if(pan_count < 0)
pan_count = 0;
++pan_count;
if(pan_count == 1)
{
usblp_dir = proc_mkdir(MODULE_NAME, NULL);
if(usblp_dir == NULL) {
goto outpan;
}
//usblp_dir->owner = THIS_MODULE;
usblpid_file = create_proc_read_entry("usblpid", 0444, usblp_dir, proc_read_usblpid, NULL);
if(usblpid_file == NULL) {
remove_proc_entry(MODULE_NAME, NULL);
goto outpan;
}
//usblpid_file->owner = THIS_MODULE;
/* get device id */
if (proc_get_usblpid(usblp) < 0)
dbg ("proc:get usblpid error!!");
}
outpan:
// End PaN
return 0;
abort_intfdata:
usb_set_intfdata(intf, NULL);
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
abort:
kfree(usblp->readbuf);
kfree(usblp->statusbuf);
kfree(usblp->device_id_string);
kfree(usblp);
abort_ret:
return retval;
}
static int usblp_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev (intf);
struct usblp *usblp = NULL;
int protocol;
int retval;
/* Malloc and start initializing usblp structure so we can use it
* directly. */
if (!(usblp = kzalloc(sizeof(struct usblp), GFP_KERNEL))) {
err("out of memory for usblp");
goto abort;
}
usblp->dev = dev;
init_MUTEX (&usblp->sem);
init_waitqueue_head(&usblp->wait);
usblp->ifnum = intf->cur_altsetting->desc.bInterfaceNumber;
usblp->intf = intf;
usblp->writeurb = usb_alloc_urb(0, GFP_KERNEL);
if (!usblp->writeurb) {
err("out of memory");
goto abort;
}
usblp->readurb = usb_alloc_urb(0, GFP_KERNEL);
if (!usblp->readurb) {
err("out of memory");
goto abort;
}
/* Malloc device ID string buffer to the largest expected length,
* since we can re-query it on an ioctl and a dynamic string
* could change in length. */
if (!(usblp->device_id_string = kmalloc(USBLP_DEVICE_ID_SIZE, GFP_KERNEL))) {
err("out of memory for device_id_string");
goto abort;
}
usblp->writebuf = usblp->readbuf = NULL;
usblp->writeurb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
usblp->readurb->transfer_flags = URB_NO_TRANSFER_DMA_MAP;
/* Malloc write & read buffers. We somewhat wastefully
* malloc both regardless of bidirectionality, because the
* alternate setting can be changed later via an ioctl. */
if (!(usblp->writebuf = usb_buffer_alloc(dev, USBLP_BUF_SIZE,
GFP_KERNEL, &usblp->writeurb->transfer_dma))) {
err("out of memory for write buf");
goto abort;
}
if (!(usblp->readbuf = usb_buffer_alloc(dev, USBLP_BUF_SIZE,
GFP_KERNEL, &usblp->readurb->transfer_dma))) {
err("out of memory for read buf");
goto abort;
}
/* Allocate buffer for printer status */
usblp->statusbuf = kmalloc(STATUS_BUF_SIZE, GFP_KERNEL);
if (!usblp->statusbuf) {
err("out of memory for statusbuf");
goto abort;
}
/* Lookup quirks for this printer. */
usblp->quirks = usblp_quirks(
le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
/* Analyze and pick initial alternate settings and endpoints. */
protocol = usblp_select_alts(usblp);
if (protocol < 0) {
dbg("incompatible printer-class device 0x%4.4X/0x%4.4X",
le16_to_cpu(dev->descriptor.idVendor),
le16_to_cpu(dev->descriptor.idProduct));
goto abort;
}
/* Setup the selected alternate setting and endpoints. */
if (usblp_set_protocol(usblp, protocol) < 0)
goto abort;
/* Retrieve and store the device ID string. */
usblp_cache_device_id_string(usblp);
device_create_file(&intf->dev, &dev_attr_ieee1284_id);
#ifdef DEBUG
usblp_check_status(usblp, 0);
#endif
usb_set_intfdata (intf, usblp);
usblp->present = 1;
retval = usb_register_dev(intf, &usblp_class);
if (retval) {
err("Not able to get a minor for this device.");
goto abort_intfdata;
}
usblp->minor = intf->minor;
info("usblp%d: USB %sdirectional printer dev %d "
"if %d alt %d proto %d vid 0x%4.4X pid 0x%4.4X",
usblp->minor, usblp->bidir ? "Bi" : "Uni", dev->devnum,
usblp->ifnum,
usblp->protocol[usblp->current_protocol].alt_setting,
usblp->current_protocol,
le16_to_cpu(usblp->dev->descriptor.idVendor),
le16_to_cpu(usblp->dev->descriptor.idProduct));
return 0;
abort_intfdata:
usb_set_intfdata (intf, NULL);
device_remove_file(&intf->dev, &dev_attr_ieee1284_id);
abort:
if (usblp) {
if (usblp->writebuf)
usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
usblp->writebuf, usblp->writeurb->transfer_dma);
if (usblp->readbuf)
usb_buffer_free (usblp->dev, USBLP_BUF_SIZE,
usblp->readbuf, usblp->writeurb->transfer_dma);
kfree(usblp->statusbuf);
kfree(usblp->device_id_string);
usb_free_urb(usblp->writeurb);
usb_free_urb(usblp->readurb);
kfree(usblp);
}
return -EIO;
}