/*
* This call tries to evenly balance the affinities for an array of
* num_threads, according to the number of cores at our disposal...
*/
BOOL SetThreadAffinity(DWORD_PTR* thread_affinity, size_t num_threads)
{
size_t i, j, pc;
DWORD_PTR affinity, dummy;
memset(thread_affinity, 0, num_threads * sizeof(DWORD_PTR));
if (!GetProcessAffinityMask(GetCurrentProcess(), &affinity, &dummy))
return FALSE;
uuprintf("\r\nThread affinities:");
uuprintf(" avail:\t%s", printbitslz(affinity));
// If we don't have enough virtual cores to evenly spread our load forget it
pc = popcnt64(affinity);
if (pc < num_threads)
return FALSE;
// Spread the affinity as evenly as we can
thread_affinity[num_threads - 1] = affinity;
for (i = 0; i < num_threads - 1; i++) {
for (j = 0; j < pc / num_threads; j++) {
thread_affinity[i] |= affinity & (-1LL * affinity);
affinity ^= affinity & (-1LL * affinity);
}
uuprintf(" thr_%d:\t%s", i, printbitslz(thread_affinity[i]));
thread_affinity[num_threads - 1] ^= thread_affinity[i];
}
uuprintf(" thr_%d:\t%s", i, printbitslz(thread_affinity[i]));
return TRUE;
}
FFmpegSource::~FFmpegSource() {
CUUKUUK *ckkp = (CUUKUUK *)ff_ptr;
uuprintf("Class del %d ------", mFd);
uuprintf("Class del %d ------", mFd);
uuprintf("Class del %d ------", mFd);
uuprintf("Class del %d ------", mFd);
if( ff_ptr ) {
if( ckkp->dx_dptr ) delete [] (uint8_t *)ckkp->dx_dptr;
delete (CUUKUUK *)ff_ptr;
}
if (mFd >= 0) {
close(mFd);
mFd = -1;
}
if (mDrmBuf != NULL) {
delete[] mDrmBuf;
mDrmBuf = NULL;
}
if (mDecryptHandle != NULL) {
// To release mDecryptHandle
CHECK(mDrmManagerClient);
mDrmManagerClient->closeDecryptSession(mDecryptHandle);
mDecryptHandle = NULL;
}
if (mDrmManagerClient != NULL) {
delete mDrmManagerClient;
mDrmManagerClient = NULL;
}
}
ssize_t FFmpegSource::readAt(off64_t offset, void *data, size_t size) {
if (mFd < 0) {
return NO_INIT;
}
CUUKUUK *ckkp;
ckkp = (CUUKUUK *)ff_ptr;
uuprintf("-----_____ read fd:%d sz:%d", mFd, size);
Mutex::Autolock autoLock(mLock);
if( ckkp->dx_fns.fnp_dx_frame_read(ckkp->dx_dptr, &(ckkp->nrm), (NR_FRAME *)data) == 0 ) {
uuprintf("FFmpegSource track_no %d\n", ((NR_FRAME *)data)->track_no);
uuprintf("FFmpegSource data_size %d\n", ((NR_FRAME *)data)->data_size);
uuprintf("FFmpegSource data_time %f\n", (float)(((NR_FRAME *)data)->t_us_pos)/1000000);
return ((NR_FRAME *)data)->data_size;
}
return -1;
}
FFmpegSource::FFmpegSource(int fd, int64_t offset, int64_t length)
: mFd(fd),
mOffset(offset),
mLength(length),
mDecryptHandle(NULL),
mDrmManagerClient(NULL),
mDrmBufOffset(0),
mDrmBufSize(0),
mDrmBuf(NULL){
CHECK(offset >= 0);
CHECK(length >= 0);
CUUKUUK *ckkp;
int ret_sz;
char ho_file[128];
mFd = dup(fd);
uuprintf("dupdupdup %d %d", fd, mFd);
uuprintf("dupdupdup %d %d", fd, mFd);
uuprintf("dupdupdup %d %d", fd, mFd);
uuprintf("ffssss %p", ff_ptr);
ff_ptr = new CUUKUUK;
uuprintf("ffssss %p", ff_ptr);
ckkp = (CUUKUUK *)ff_ptr;
uuprintf("ffssss %p", ckkp);
__bb_dx_init_libavformat(&(ckkp->dx_fns), &ret_sz);
ckkp->dx_dptr = new uint8_t[ret_sz];
ckkp->dx_fns.fnp_dx_load(ckkp->dx_dptr, &(ckkp->nrm));
sprintf(ho_file, "hofd://%d", mFd);
uuprintf("ffssss %s", ho_file);
if( ckkp->dx_fns.fnp_dx_file_read(ckkp->dx_dptr, ho_file, &(ckkp->nrm)) ) {
delete (CUUKUUK *)ff_ptr;
ff_ptr = 0;
} else {
ff_ex1 = ckkp->nrm.fourcc_ex1;
ff_ex2 = ckkp->nrm.fourcc_ex2;
}
/*
if( ff_ex1 != __ITY_WAV__ )
{
ckkp->dx_fns.fnp_dx_file_colse(ckkp->dx_dptr, &(ckkp->nrm));
delete (ckkp->dx_dptr); ckkp->dx_dptr = 0;
delete (ff_ptr); ff_ptr = 0;
}
*/
}
/*
* Refresh the list of USB devices
*/
BOOL GetDevices(DWORD devnum)
{
// List of USB storage drivers we know - list may be incomplete!
const char* usbstor_name[] = {
// Standard MS USB storage driver
"USBSTOR",
// USB card readers, with proprietary drivers (Realtek,etc...)
// Mostly "guessed" from http://www.carrona.org/dvrref.php
"RTSUER", "CMIUCR", "EUCR",
// UASP Drivers *MUST* be listed after this, starting with "UASPSTOR"
// (which is Microsoft's native UASP driver for Windows 8 and later)
// as we use "UASPSTOR" as a delimiter
"UASPSTOR", "VUSBSTOR", "ETRONSTOR", "ASUSSTPT"
};
// These are the generic (non USB) storage enumerators we also test
const char* genstor_name[] = {
// Generic storage drivers (Careful now!)
"SCSI", // "STORAGE", // "STORAGE" is used by 'Storage Spaces" and stuff => DANGEROUS!
// Non-USB card reader drivers - This list *MUST* start with "SD" (delimiter)
// See http://itdoc.hitachi.co.jp/manuals/3021/30213B5200e/DMDS0094.HTM
// Also http://www.carrona.org/dvrref.php. NB: These should be reported
// as enumerators by Rufus when Enum Debug is enabled
"SD", "PCISTOR", "RTSOR", "JMCR", "JMCF", "RIMMPTSK", "RIMSPTSK", "RISD", "RIXDPTSK",
"TI21SONY", "ESD7SK", "ESM7SK", "O2MD", "O2SD", "VIACR"
};
// Oh, and we also have card devices (e.g. 'SCSI\DiskO2Micro_SD_...') under the SCSI enumerator...
const char* scsi_disk_prefix = "SCSI\\Disk";
const char* scsi_card_name[] = {
"_SD_", "_SDHC_", "_MMC_", "_MS_", "_MSPro_", "_xDPicture_", "_O2Media_"
};
const char* usb_speed_name[USB_SPEED_MAX] = { "USB", "USB 1.0", "USB 1.1", "USB 2.0", "USB 3.0" };
// Hash table and String Array used to match a Device ID with the parent hub's Device Interface Path
htab_table htab_devid = HTAB_EMPTY;
StrArray dev_if_path;
char letter_name[] = " (?:)";
char drive_name[] = "?:\\";
char uefi_togo_check[] = "?:\\EFI\\Rufus\\ntfs_x64.efi";
char scsi_card_name_copy[16];
BOOL r = FALSE, found = FALSE, post_backslash;
HDEVINFO dev_info = NULL;
SP_DEVINFO_DATA dev_info_data;
SP_DEVICE_INTERFACE_DATA devint_data;
PSP_DEVICE_INTERFACE_DETAIL_DATA_A devint_detail_data;
DEVINST parent_inst, grandparent_inst, device_inst;
DWORD size, i, j, k, l, datatype, drive_index;
DWORD uasp_start = ARRAYSIZE(usbstor_name), card_start = ARRAYSIZE(genstor_name);
ULONG list_size[ARRAYSIZE(usbstor_name)] = { 0 }, list_start[ARRAYSIZE(usbstor_name)] = { 0 }, full_list_size, ulFlags;
HANDLE hDrive;
LONG maxwidth = 0;
int s, score, drive_number, remove_drive;
char drive_letters[27], *device_id, *devid_list = NULL, entry_msg[128];
char *p, *label, *entry, buffer[MAX_PATH], str[MAX_PATH], *method_str, *hub_path;
usb_device_props props;
IGNORE_RETVAL(ComboBox_ResetContent(hDeviceList));
StrArrayClear(&DriveID);
StrArrayClear(&DriveLabel);
StrArrayClear(&DriveHub);
StrArrayCreate(&dev_if_path, 128);
// Add a dummy for string index zero, as this is what non matching hashes will point to
StrArrayAdd(&dev_if_path, "", TRUE);
device_id = (char*)malloc(MAX_PATH);
if (device_id == NULL)
goto out;
// Build a hash table associating a CM Device ID of an USB device with the SetupDI Device Interface Path
// of its parent hub - this is needed to retrieve the device speed
dev_info = SetupDiGetClassDevsA(&_GUID_DEVINTERFACE_USB_HUB, NULL, NULL, DIGCF_PRESENT|DIGCF_DEVICEINTERFACE);
if (dev_info != INVALID_HANDLE_VALUE) {
if (htab_create(DEVID_HTAB_SIZE, &htab_devid)) {
dev_info_data.cbSize = sizeof(dev_info_data);
for (i=0; SetupDiEnumDeviceInfo(dev_info, i, &dev_info_data); i++) {
uuprintf("Processing Hub %d:", i + 1);
devint_detail_data = NULL;
devint_data.cbSize = sizeof(devint_data);
// Only care about the first interface (MemberIndex 0)
if ( (SetupDiEnumDeviceInterfaces(dev_info, &dev_info_data, &_GUID_DEVINTERFACE_USB_HUB, 0, &devint_data))
&& (!SetupDiGetDeviceInterfaceDetailA(dev_info, &devint_data, NULL, 0, &size, NULL))
&& (GetLastError() == ERROR_INSUFFICIENT_BUFFER)
&& ((devint_detail_data = (PSP_DEVICE_INTERFACE_DETAIL_DATA_A)calloc(1, size)) != NULL) ) {
devint_detail_data->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA_A);
if (SetupDiGetDeviceInterfaceDetailA(dev_info, &devint_data, devint_detail_data, size, &size, NULL)) {
// Find the Device IDs for all the children of this hub
if (CM_Get_Child(&device_inst, dev_info_data.DevInst, 0) == CR_SUCCESS) {
device_id[0] = 0;
s = StrArrayAdd(&dev_if_path, devint_detail_data->DevicePath, TRUE);
uuprintf(" Hub[%d] = '%s'", s, devint_detail_data->DevicePath);
if ((s>= 0) && (CM_Get_Device_IDA(device_inst, device_id, MAX_PATH, 0) == CR_SUCCESS)) {
ToUpper(device_id);
if ((k = htab_hash(device_id, &htab_devid)) != 0) {
htab_devid.table[k].data = (void*)(uintptr_t)s;
}
uuprintf(" Found ID[%03d]: %s", k, device_id);
while (CM_Get_Sibling(&device_inst, device_inst, 0) == CR_SUCCESS) {
device_id[0] = 0;
if (CM_Get_Device_IDA(device_inst, device_id, MAX_PATH, 0) == CR_SUCCESS) {
ToUpper(device_id);
if ((k = htab_hash(device_id, &htab_devid)) != 0) {
htab_devid.table[k].data = (void*)(uintptr_t)s;
}
uuprintf(" Found ID[%03d]: %s", k, device_id);
}
}
}
}
}
free(devint_detail_data);
}
}
}
SetupDiDestroyDeviceInfoList(dev_info);
}
free(device_id);
// Build a single list of Device IDs from all the storage enumerators we know of
full_list_size = 0;
ulFlags = CM_GETIDLIST_FILTER_SERVICE | CM_GETIDLIST_FILTER_PRESENT;
for (s=0; s<ARRAYSIZE(usbstor_name); s++) {
// Get a list of device IDs for all USB storage devices
// This will be used to find if a device is UASP
// Also compute the uasp_start index
if (strcmp(usbstor_name[s], "UASPSTOR") == 0)
uasp_start = s;
if (CM_Get_Device_ID_List_SizeA(&list_size[s], usbstor_name[s], ulFlags) != CR_SUCCESS)
list_size[s] = 0;
if (list_size[s] != 0)
full_list_size += list_size[s]-1; // remove extra NUL terminator
}
// Compute the card_start index
for (s=0; s<ARRAYSIZE(genstor_name); s++) {
if (strcmp(genstor_name[s], "SD") == 0)
card_start = s;
}
// Better safe than sorry. And yeah, we could have used arrays of
// arrays to avoid this, but it's more readable this way.
assert((uasp_start > 0) && (uasp_start < ARRAYSIZE(usbstor_name)));
assert((card_start > 0) && (card_start < ARRAYSIZE(genstor_name)));
devid_list = NULL;
if (full_list_size != 0) {
full_list_size += 1; // add extra NUL terminator
devid_list = (char*)malloc(full_list_size);
if (devid_list == NULL) {
uprintf("Could not allocate Device ID list\n");
goto out;
}
for (s=0, i=0; s<ARRAYSIZE(usbstor_name); s++) {
list_start[s] = i;
if (list_size[s] > 1) {
if (CM_Get_Device_ID_ListA(usbstor_name[s], &devid_list[i], list_size[s], ulFlags) != CR_SUCCESS)
continue;
if (usb_debug) {
uprintf("Processing IDs belonging to '%s':", usbstor_name[s]);
for (device_id = &devid_list[i]; *device_id != 0; device_id += strlen(device_id) + 1)
uprintf(" %s", device_id);
}
// The list_size is sometimes larger than required thus we need to find the real end
for (i += list_size[s]; i > 2; i--) {
if ((devid_list[i-2] != '\0') && (devid_list[i-1] == '\0') && (devid_list[i] == '\0'))
break;
}
}
}
}
// Now use SetupDi to enumerate all our disk storage devices
dev_info = SetupDiGetClassDevsA(&_GUID_DEVINTERFACE_DISK, NULL, NULL, DIGCF_PRESENT|DIGCF_DEVICEINTERFACE);
if (dev_info == INVALID_HANDLE_VALUE) {
uprintf("SetupDiGetClassDevs (Interface) failed: %s\n", WindowsErrorString());
goto out;
}
dev_info_data.cbSize = sizeof(dev_info_data);
for (i=0; SetupDiEnumDeviceInfo(dev_info, i, &dev_info_data); i++) {
memset(buffer, 0, sizeof(buffer));
memset(&props, 0, sizeof(props));
method_str = "";
hub_path = NULL;
if (!SetupDiGetDeviceRegistryPropertyA(dev_info, &dev_info_data, SPDRP_ENUMERATOR_NAME,
&datatype, (LPBYTE)buffer, sizeof(buffer), &size)) {
uprintf("SetupDiGetDeviceRegistryProperty (Enumerator Name) failed: %s\n", WindowsErrorString());
continue;
}
for (j = 0; j < ARRAYSIZE(usbstor_name); j++) {
if (safe_stricmp(buffer, usbstor_name[0]) == 0) {
props.is_USB = TRUE;
if ((j != 0) && (j < uasp_start))
props.is_CARD = TRUE;
break;
}
}
// UASP drives are listed under SCSI, and we also have non USB card readers to populate
for (j = 0; j < ARRAYSIZE(genstor_name); j++) {
if (safe_stricmp(buffer, genstor_name[j]) == 0) {
props.is_SCSI = TRUE;
if (j >= card_start)
props.is_CARD = TRUE;
break;
}
}
uuprintf("Processing '%s' device:", buffer);
if ((!props.is_USB) && (!props.is_SCSI)) {
uuprintf(" Disabled by policy");
continue;
}
// We can't use the friendly name to find if a drive is a VHD, as friendly name string gets translated
// according to your locale, so we poke the Hardware ID
memset(buffer, 0, sizeof(buffer));
props.is_VHD = SetupDiGetDeviceRegistryPropertyA(dev_info, &dev_info_data, SPDRP_HARDWAREID,
&datatype, (LPBYTE)buffer, sizeof(buffer), &size) && IsVHD(buffer);
// Additional detection for SCSI card readers
if ((!props.is_CARD) && (safe_strnicmp(buffer, scsi_disk_prefix, sizeof(scsi_disk_prefix)-1) == 0)) {
for (j = 0; j < ARRAYSIZE(scsi_card_name); j++) {
static_strcpy(scsi_card_name_copy, scsi_card_name[j]);
if (safe_strstr(buffer, scsi_card_name_copy) != NULL) {
props.is_CARD = TRUE;
break;
}
// Also test for "_SD&" instead of "_SD_" and so on to allow for devices like
// "SCSI\DiskRicoh_Storage_SD&REV_3.0" to be detected.
scsi_card_name_copy[strlen(scsi_card_name_copy) - 1] = '&';
if (safe_strstr(buffer, scsi_card_name_copy) != NULL) {
props.is_CARD = TRUE;
break;
}
}
}
uuprintf(" Hardware ID: '%s'", buffer);
memset(buffer, 0, sizeof(buffer));
props.is_Removable = SetupDiGetDeviceRegistryPropertyA(dev_info, &dev_info_data, SPDRP_REMOVAL_POLICY,
&datatype, (LPBYTE)buffer, sizeof(buffer), &size) && IsRemovable(buffer);
memset(buffer, 0, sizeof(buffer));
if (!SetupDiGetDeviceRegistryPropertyU(dev_info, &dev_info_data, SPDRP_FRIENDLYNAME,
&datatype, (LPBYTE)buffer, sizeof(buffer), &size)) {
uprintf("SetupDiGetDeviceRegistryProperty (Friendly Name) failed: %s\n", WindowsErrorString());
// We can afford a failure on this call - just replace the name with "USB Storage Device (Generic)"
static_strcpy(buffer, lmprintf(MSG_045));
} else if ((!props.is_VHD) && (devid_list != NULL)) {
// Get the properties of the device. We could avoid doing this lookup every time by keeping
// a lookup table, but there shouldn't be that many USB storage devices connected...
// NB: Each of these Device IDs should have a child, from which we get the Device Instance match.
for (device_id = devid_list; *device_id != 0; device_id += strlen(device_id) + 1) {
if (CM_Locate_DevNodeA(&parent_inst, device_id, 0) != CR_SUCCESS) {
uuprintf("Could not locate device node for '%s'", device_id);
continue;
}
if (CM_Get_Child(&device_inst, parent_inst, 0) != CR_SUCCESS) {
uuprintf("Could not get children of '%s'", device_id);
continue;
}
if (device_inst != dev_info_data.DevInst) {
// Try the siblings
while (CM_Get_Sibling(&device_inst, device_inst, 0) == CR_SUCCESS) {
if (device_inst == dev_info_data.DevInst) {
uuprintf("NOTE: Matched instance from sibling for '%s'", device_id);
break;
}
}
if (device_inst != dev_info_data.DevInst)
continue;
}
post_backslash = FALSE;
method_str = "";
// If we're not dealing with the USBSTOR part of our list, then this is an UASP device
props.is_UASP = ((((uintptr_t)device_id)+2) >= ((uintptr_t)devid_list)+list_start[uasp_start]);
// Now get the properties of the device, and its Device ID, which we need to populate the properties
ToUpper(device_id);
j = htab_hash(device_id, &htab_devid);
uuprintf(" Matched with ID[%03d]: %s", j, device_id);
// Try to parse the current device_id string for VID:PID
// We'll use that if we can't get anything better
for (k = 0, l = 0; (k<strlen(device_id)) && (l<2); k++) {
// The ID is in the form USB_VENDOR_BUSID\VID_xxxx&PID_xxxx\...
if (device_id[k] == '\\')
post_backslash = TRUE;
if (!post_backslash)
continue;
if (device_id[k] == '_') {
props.pid = (uint16_t)strtoul(&device_id[k + 1], NULL, 16);
if (l++ == 0)
props.vid = props.pid;
}
}
if (props.vid != 0)
method_str = "[ID]";
// If the hash didn't match a populated string in dev_if_path[] (htab_devid.table[j].data > 0),
// we might have an extra vendor driver in between (e.g. "ASUS USB 3.0 Boost Storage Driver"
// for UASP devices in ASUS "Turbo Mode" or "Apple Mobile Device USB Driver" for iPods)
// so try to see if we can match the grandparent.
if ( ((uintptr_t)htab_devid.table[j].data == 0)
&& (CM_Get_Parent(&grandparent_inst, parent_inst, 0) == CR_SUCCESS)
&& (CM_Get_Device_IDA(grandparent_inst, str, MAX_PATH, 0) == CR_SUCCESS) ) {
device_id = str;
method_str = "[GP]";
ToUpper(device_id);
j = htab_hash(device_id, &htab_devid);
uuprintf(" Matched with (GP) ID[%03d]: %s", j, device_id);
}
if ((uintptr_t)htab_devid.table[j].data > 0) {
uuprintf(" Matched with Hub[%d]: '%s'", (uintptr_t)htab_devid.table[j].data,
dev_if_path.String[(uintptr_t)htab_devid.table[j].data]);
if (GetUSBProperties(dev_if_path.String[(uintptr_t)htab_devid.table[j].data], device_id, &props)) {
method_str = "";
hub_path = dev_if_path.String[(uintptr_t)htab_devid.table[j].data];
}
#ifdef FORCED_DEVICE
props.vid = FORCED_VID;
props.pid = FORCED_PID;
static_strcpy(buffer, FORCED_NAME);
#endif
}
break;
}
}
if (props.is_VHD) {
uprintf("Found VHD device '%s'", buffer);
} else if ((props.is_CARD) && ((!props.is_USB) || ((props.vid == 0) && (props.pid == 0)))) {
uprintf("Found card reader device '%s'", buffer);
} else if ((!props.is_USB) && (!props.is_UASP) && (props.is_Removable)) {
if (!list_non_usb_removable_drives) {
uprintf("Found non-USB removable device '%s' => Eliminated", buffer);
uuprintf("If you *REALLY* need, you can enable listing of this device with <Ctrl><Alt><F>");
continue;
}
uprintf("Found non-USB removable device '%s'", buffer);
} else {
if ((props.vid == 0) && (props.pid == 0)) {
if (!props.is_USB) {
// If we have a non removable SCSI drive and couldn't get a VID:PID,
// we are most likely dealing with a system drive => eliminate it!
uuprintf("Found non-USB non-removable device '%s' => Eliminated", buffer);
continue;
}
static_strcpy(str, "????:????"); // Couldn't figure VID:PID
} else {
static_sprintf(str, "%04X:%04X", props.vid, props.pid);
}
if (props.speed >= USB_SPEED_MAX)
props.speed = 0;
uprintf("Found %s%s%s device '%s' (%s) %s\n", props.is_UASP?"UAS (":"",
usb_speed_name[props.speed], props.is_UASP?")":"", buffer, str, method_str);
if (props.is_LowerSpeed)
uprintf("NOTE: This device is an USB 3.0 device operating at lower speed...");
}
devint_data.cbSize = sizeof(devint_data);
hDrive = INVALID_HANDLE_VALUE;
devint_detail_data = NULL;
for (j=0; ;j++) {
safe_closehandle(hDrive);
safe_free(devint_detail_data);
if (!SetupDiEnumDeviceInterfaces(dev_info, &dev_info_data, &_GUID_DEVINTERFACE_DISK, j, &devint_data)) {
if(GetLastError() != ERROR_NO_MORE_ITEMS) {
uprintf("SetupDiEnumDeviceInterfaces failed: %s\n", WindowsErrorString());
} else {
uprintf("A device was eliminated because it didn't report itself as a disk\n");
}
break;
}
if (!SetupDiGetDeviceInterfaceDetailA(dev_info, &devint_data, NULL, 0, &size, NULL)) {
if(GetLastError() == ERROR_INSUFFICIENT_BUFFER) {
devint_detail_data = (PSP_DEVICE_INTERFACE_DETAIL_DATA_A)calloc(1, size);
if (devint_detail_data == NULL) {
uprintf("Unable to allocate data for SP_DEVICE_INTERFACE_DETAIL_DATA\n");
continue;
}
devint_detail_data->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA_A);
} else {
uprintf("SetupDiGetDeviceInterfaceDetail (dummy) failed: %s\n", WindowsErrorString());
continue;
}
}
if (devint_detail_data == NULL) {
uprintf("SetupDiGetDeviceInterfaceDetail (dummy) - no data was allocated\n");
continue;
}
if(!SetupDiGetDeviceInterfaceDetailA(dev_info, &devint_data, devint_detail_data, size, &size, NULL)) {
uprintf("SetupDiGetDeviceInterfaceDetail (actual) failed: %s\n", WindowsErrorString());
continue;
}
hDrive = CreateFileA(devint_detail_data->DevicePath, GENERIC_READ|GENERIC_WRITE,
FILE_SHARE_READ|FILE_SHARE_WRITE, NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
if(hDrive == INVALID_HANDLE_VALUE) {
uprintf("Could not open '%s': %s\n", devint_detail_data->DevicePath, WindowsErrorString());
continue;
}
drive_number = GetDriveNumber(hDrive, devint_detail_data->DevicePath);
if (drive_number < 0)
continue;
drive_index = drive_number + DRIVE_INDEX_MIN;
if (!IsMediaPresent(drive_index)) {
uprintf("Device eliminated because it appears to contain no media\n");
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
if (GetDriveSize(drive_index) < (MIN_DRIVE_SIZE*MB)) {
uprintf("Device eliminated because it is smaller than %d MB\n", MIN_DRIVE_SIZE);
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
if (GetDriveLabel(drive_index, drive_letters, &label)) {
if ((props.is_SCSI) && (!props.is_UASP) && (!props.is_VHD)) {
if (!props.is_Removable) {
// Non removables should have been eliminated above, but since we
// are potentially dealing with system drives, better safe than sorry
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
if (!list_non_usb_removable_drives) {
// Go over the mounted partitions and find if GetDriveType() says they are
// removable. If they are not removable, don't allow the drive to be listed
for (p = drive_letters; *p; p++) {
drive_name[0] = *p;
if (GetDriveTypeA(drive_name) != DRIVE_REMOVABLE)
break;
}
if (*p) {
uprintf("Device eliminated because it contains a mounted partition that is set as non-removable");
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
}
}
if ((!enable_HDDs) && (!props.is_VHD) && (!props.is_CARD) &&
((score = IsHDD(drive_index, (uint16_t)props.vid, (uint16_t)props.pid, buffer)) > 0)) {
uprintf("Device eliminated because it was detected as a Hard Drive (score %d > 0)", score);
if (!list_non_usb_removable_drives)
uprintf("If this device is not a Hard Drive, please e-mail the author of this application");
uprintf("NOTE: You can enable the listing of Hard Drives under 'advanced drive properties'");
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
// The empty string is returned for drives that don't have any volumes assigned
if (drive_letters[0] == 0) {
entry = lmprintf(MSG_046, label, drive_number,
SizeToHumanReadable(GetDriveSize(drive_index), FALSE, use_fake_units));
} else {
// Find the UEFI:TOGO partition(s) (and eliminate them form our listing)
for (k=0; drive_letters[k]; k++) {
uefi_togo_check[0] = drive_letters[k];
if (PathFileExistsA(uefi_togo_check)) {
for (l=k; drive_letters[l]; l++)
drive_letters[l] = drive_letters[l+1];
k--;
}
}
// We have multiple volumes assigned to the same device (multiple partitions)
// If that is the case, use "Multiple Volumes" instead of the label
static_strcpy(entry_msg, (((drive_letters[0] != 0) && (drive_letters[1] != 0))?
lmprintf(MSG_047):label));
for (k=0, remove_drive=0; drive_letters[k] && (!remove_drive); k++) {
// Append all the drive letters we detected
letter_name[2] = drive_letters[k];
if (right_to_left_mode)
static_strcat(entry_msg, RIGHT_TO_LEFT_MARK);
static_strcat(entry_msg, letter_name);
if (drive_letters[k] == (PathGetDriveNumberU(app_dir) + 'A'))
remove_drive = 1;
if (drive_letters[k] == (PathGetDriveNumberU(system_dir) + 'A'))
remove_drive = 2;
}
// Make sure that we don't list any drive that should not be listed
if (remove_drive) {
uprintf("Removing %C: from the list: This is the %s!", drive_letters[--k],
(remove_drive==1)?"disk from which " APPLICATION_NAME " is running":"system disk");
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
safe_sprintf(&entry_msg[strlen(entry_msg)], sizeof(entry_msg) - strlen(entry_msg),
"%s [%s]", (right_to_left_mode)?RIGHT_TO_LEFT_MARK:"", SizeToHumanReadable(GetDriveSize(drive_index), FALSE, use_fake_units));
entry = entry_msg;
}
// Must ensure that the combo box is UNSORTED for indexes to be the same
StrArrayAdd(&DriveID, buffer, TRUE);
StrArrayAdd(&DriveLabel, label, TRUE);
if ((hub_path != NULL) && (StrArrayAdd(&DriveHub, hub_path, TRUE) >= 0))
DrivePort[DriveHub.Index - 1] = props.port;
IGNORE_RETVAL(ComboBox_SetItemData(hDeviceList, ComboBox_AddStringU(hDeviceList, entry), drive_index));
maxwidth = max(maxwidth, GetEntryWidth(hDeviceList, entry));
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
}
}
SetupDiDestroyDeviceInfoList(dev_info);
// Adjust the Dropdown width to the maximum text size
SendMessage(hDeviceList, CB_SETDROPPEDWIDTH, (WPARAM)maxwidth, 0);
if (devnum >= DRIVE_INDEX_MIN) {
for (i=0; i<ComboBox_GetCount(hDeviceList); i++) {
if ((DWORD)ComboBox_GetItemData(hDeviceList, i) == devnum) {
found = TRUE;
break;
}
}
}
if (!found)
i = 0;
IGNORE_RETVAL(ComboBox_SetCurSel(hDeviceList, i));
SendMessage(hMainDialog, WM_COMMAND, (CBN_SELCHANGE<<16) | IDC_DEVICE, 0);
r = TRUE;
out:
// Set 'Start' as the selected button, so that tab selection works
SendMessage(hMainDialog, WM_NEXTDLGCTL, (WPARAM)GetDlgItem(hMainDialog, IDC_START), TRUE);
safe_free(devid_list);
StrArrayDestroy(&dev_if_path);
htab_destroy(&htab_devid);
return r;
}
static DWORD WINAPI SearchProcessThread(LPVOID param)
{
const char *access_rights_str[8] = { "n", "r", "w", "rw", "x", "rx", "wx", "rwx" };
char tmp[MAX_PATH];
NTSTATUS status = STATUS_SUCCESS;
PSYSTEM_HANDLE_INFORMATION_EX handles = NULL;
POBJECT_NAME_INFORMATION buffer = NULL;
ULONG_PTR i;
ULONG_PTR pid[2];
ULONG_PTR last_access_denied_pid = 0;
ULONG bufferSize;
USHORT wHandleNameLen;
WCHAR *wHandleName = NULL;
HANDLE dupHandle = NULL;
HANDLE processHandle = NULL;
BOOLEAN bFound = FALSE, bGotExePath, verbose = !_bQuiet;
ULONG access_rights = 0;
DWORD size;
char exe_path[MAX_PATH] = { 0 };
wchar_t wexe_path[MAX_PATH];
int cur_pid;
PF_INIT_OR_SET_STATUS(NtQueryObject, Ntdll);
PF_INIT_OR_SET_STATUS(NtDuplicateObject, NtDll);
PF_INIT_OR_SET_STATUS(NtClose, NtDll);
StrArrayClear(&BlockingProcess);
if (NT_SUCCESS(status))
status = PhCreateHeap();
if (NT_SUCCESS(status))
status = PhEnumHandlesEx(&handles);
if (!NT_SUCCESS(status)) {
uprintf("Warning: Could not enumerate process handles: %s", NtStatusError(status));
goto out;
}
pid[0] = (ULONG_PTR)0;
cur_pid = 1;
wHandleName = utf8_to_wchar(_HandleName);
wHandleNameLen = (USHORT)wcslen(wHandleName);
bufferSize = 0x200;
buffer = PhAllocate(bufferSize);
if (buffer == NULL)
goto out;
for (i = 0; ; i++) {
ULONG attempts = 8;
PSYSTEM_HANDLE_TABLE_ENTRY_INFO_EX handleInfo =
(i < handles->NumberOfHandles) ? &handles->Handles[i] : NULL;
if ((dupHandle != NULL) && (processHandle != NtCurrentProcess())) {
pfNtClose(dupHandle);
dupHandle = NULL;
}
// Update the current handle's process PID and compare against last
// Note: Be careful about not trying to overflow our list!
pid[cur_pid] = (handleInfo != NULL) ? handleInfo->UniqueProcessId : -1;
if (pid[0] != pid[1]) {
cur_pid = (cur_pid + 1) % 2;
// If we're switching process and found a match, print it
if (bFound) {
vuprintf("● '%s' (pid: %ld, access: %s)", exe_path, pid[cur_pid], access_rights_str[access_rights & 0x7]);
static_sprintf(tmp, "● %s (%s)", exe_path, access_rights_str[access_rights & 0x7]);
StrArrayAdd(&BlockingProcess, tmp, TRUE);
bFound = FALSE;
access_rights = 0;
}
// Close the previous handle
if (processHandle != NULL) {
if (processHandle != NtCurrentProcess())
pfNtClose(processHandle);
processHandle = NULL;
}
}
CHECK_FOR_USER_CANCEL;
// Exit loop condition
if (i >= handles->NumberOfHandles)
break;
// Don't bother with processes we can't access
if (handleInfo->UniqueProcessId == last_access_denied_pid)
continue;
// Filter out handles that aren't opened with Read (bit 0), Write (bit 1) or Execute (bit 5) access
if ((handleInfo->GrantedAccess & 0x23) == 0)
continue;
// Open the process to which the handle we are after belongs, if not already opened
if (pid[0] != pid[1]) {
status = PhOpenProcess(&processHandle, PROCESS_DUP_HANDLE | PROCESS_QUERY_INFORMATION,
(HANDLE)handleInfo->UniqueProcessId);
// There exists some processes we can't access
if (!NT_SUCCESS(status)) {
uuprintf("SearchProcess: Could not open process %ld: %s",
handleInfo->UniqueProcessId, NtStatusError(status));
processHandle = NULL;
if (status == STATUS_ACCESS_DENIED) {
last_access_denied_pid = handleInfo->UniqueProcessId;
}
continue;
}
}
// Now duplicate this handle onto our own process, so that we can access its properties
if (processHandle == NtCurrentProcess()) {
if (_bIgnoreSelf)
continue;
dupHandle = (HANDLE)handleInfo->HandleValue;
} else {
status = pfNtDuplicateObject(processHandle, (HANDLE)handleInfo->HandleValue,
NtCurrentProcess(), &dupHandle, 0, 0, 0);
if (!NT_SUCCESS(status))
continue;
}
// Filter non-storage handles. We're not interested in them and they make NtQueryObject() freeze
if (GetFileType(dupHandle) != FILE_TYPE_DISK)
continue;
// A loop is needed because the I/O subsystem likes to give us the wrong return lengths...
do {
ULONG returnSize;
// TODO: We might potentially still need a timeout on ObjectName queries, as PH does...
status = pfNtQueryObject(dupHandle, ObjectNameInformation, buffer, bufferSize, &returnSize);
if (status == STATUS_BUFFER_OVERFLOW || status == STATUS_INFO_LENGTH_MISMATCH ||
status == STATUS_BUFFER_TOO_SMALL) {
uuprintf("SearchProcess: Realloc from %d to %d", bufferSize, returnSize);
bufferSize = returnSize;
PhFree(buffer);
buffer = PhAllocate(bufferSize);
} else {
break;
}
} while (--attempts);
if (!NT_SUCCESS(status)) {
uuprintf("SearchProcess: NtQueryObject failed for handle %X of process %ld: %s",
handleInfo->HandleValue, handleInfo->UniqueProcessId, NtStatusError(status));
continue;
}
// Don't bother comparing if we are looking for full match and the length is different
if ((!_bPartialMatch) && (wHandleNameLen != buffer->Name.Length))
continue;
// Likewise, if we are looking for a partial match and the current length is smaller
if ((_bPartialMatch) && (wHandleNameLen > buffer->Name.Length))
continue;
// Match against our target string
if (wcsncmp(wHandleName, buffer->Name.Buffer, wHandleNameLen) != 0)
continue;
// If we are here, we have a process accessing our target!
bFound = TRUE;
// Keep a mask of all the access rights being used
access_rights |= handleInfo->GrantedAccess;
// The Executable bit is in a place we don't like => reposition it
if (access_rights & 0x20)
access_rights = (access_rights & 0x03) | 0x04;
access_mask |= (BYTE) (access_rights & 0x7) + 0x80; // Bit 7 is always set if a process was found
// If this is the very first process we find, print a header
if (exe_path[0] == 0)
vuprintf("WARNING: The following process(es) or service(s) are accessing %s:", _HandleName);
// First, we try to get the executable path using GetModuleFileNameEx
bGotExePath = (GetModuleFileNameExU(processHandle, 0, exe_path, MAX_PATH - 1) != 0);
// The above may not work on Windows 7, so try QueryFullProcessImageName (Vista or later)
if (!bGotExePath) {
size = MAX_PATH;
PF_INIT(QueryFullProcessImageNameW, kernel32);
if ( (pfQueryFullProcessImageNameW != NULL) &&
(bGotExePath = pfQueryFullProcessImageNameW(processHandle, 0, wexe_path, &size)) )
wchar_to_utf8_no_alloc(wexe_path, exe_path, sizeof(exe_path));
}
// Still nothing? Try GetProcessImageFileName. Note that GetProcessImageFileName uses
// '\Device\Harddisk#\Partition#\' instead drive letters
if (!bGotExePath) {
bGotExePath = (GetProcessImageFileNameW(processHandle, wexe_path, MAX_PATH) != 0);
if (bGotExePath)
wchar_to_utf8_no_alloc(wexe_path, exe_path, sizeof(exe_path));
}
// Complete failure => Just craft a default process name that includes the PID
if (!bGotExePath) {
safe_sprintf(exe_path, MAX_PATH, "Unknown_Process_%" PRIu64,
(ULONGLONG)handleInfo->UniqueProcessId);
}
}
out:
if (exe_path[0] != 0)
vuprintf("You should close these applications before attempting to reformat the drive.");
else
vuprintf("NOTE: Could not identify the process(es) or service(s) accessing %s", _HandleName);
free(wHandleName);
PhFree(buffer);
PhFree(handles);
PhDestroyHeap();
ExitThread(0);
}
/*
* Refresh the list of USB devices
*/
BOOL GetUSBDevices(DWORD devnum)
{
// The first two are standard Microsoft drivers (including the Windows 8 UASP one).
// The rest are the vendor UASP drivers I know of so far - list may be incomplete!
const char* storage_name[] = { "USBSTOR", "UASPSTOR", "VUSBSTOR", "ETRONSTOR", "ASUSSTPT" };
const char* scsi_name = "SCSI";
const char* usb_speed_name[USB_SPEED_MAX] = { "USB", "USB 1.0", "USB 1.1", "USB 2.0", "USB 3.0" };
// Hash table and String Array used to match a Device ID with the parent hub's Device Interface Path
htab_table htab_devid = HTAB_EMPTY;
StrArray dev_if_path;
char letter_name[] = " (?:)";
char uefi_togo_check[] = "?:\\EFI\\Rufus\\ntfs_x64.efi";
BOOL r = FALSE, found = FALSE, is_SCSI, post_backslash;
HDEVINFO dev_info = NULL;
SP_DEVINFO_DATA dev_info_data;
SP_DEVICE_INTERFACE_DATA devint_data;
PSP_DEVICE_INTERFACE_DETAIL_DATA_A devint_detail_data;
DEVINST parent_inst, grandparent_inst, device_inst;
DWORD size, i, j, k, l, datatype, drive_index;
ULONG list_size[ARRAYSIZE(storage_name)] = { 0 }, list_start[ARRAYSIZE(storage_name)] = { 0 }, full_list_size, ulFlags;
HANDLE hDrive;
LONG maxwidth = 0;
int s, score, drive_number, remove_drive;
char drive_letters[27], *device_id, *devid_list = NULL, entry_msg[128];
char *label, *entry, buffer[MAX_PATH], str[MAX_PATH], *method_str;
usb_device_props props;
IGNORE_RETVAL(ComboBox_ResetContent(hDeviceList));
StrArrayClear(&DriveID);
StrArrayClear(&DriveLabel);
StrArrayCreate(&dev_if_path, 128);
// Add a dummy for string index zero, as this is what non matching hashes will point to
StrArrayAdd(&dev_if_path, "");
device_id = (char*)malloc(MAX_PATH);
if (device_id == NULL)
goto out;
// Build a hash table associating a CM Device ID of an USB device with the SetupDI Device Interface Path
// of its parent hub - this is needed to retrieve the device speed
dev_info = SetupDiGetClassDevsA(&_GUID_DEVINTERFACE_USB_HUB, NULL, NULL, DIGCF_PRESENT|DIGCF_DEVICEINTERFACE);
if (dev_info != INVALID_HANDLE_VALUE) {
if (htab_create(DEVID_HTAB_SIZE, &htab_devid)) {
dev_info_data.cbSize = sizeof(dev_info_data);
for (i=0; SetupDiEnumDeviceInfo(dev_info, i, &dev_info_data); i++) {
uuprintf("Processing Hub %d:", i + 1);
devint_detail_data = NULL;
devint_data.cbSize = sizeof(devint_data);
// Only care about the first interface (MemberIndex 0)
if ( (SetupDiEnumDeviceInterfaces(dev_info, &dev_info_data, &_GUID_DEVINTERFACE_USB_HUB, 0, &devint_data))
&& (!SetupDiGetDeviceInterfaceDetailA(dev_info, &devint_data, NULL, 0, &size, NULL))
&& (GetLastError() == ERROR_INSUFFICIENT_BUFFER)
&& ((devint_detail_data = (PSP_DEVICE_INTERFACE_DETAIL_DATA_A)calloc(1, size)) != NULL) ) {
devint_detail_data->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA_A);
if (SetupDiGetDeviceInterfaceDetailA(dev_info, &devint_data, devint_detail_data, size, &size, NULL)) {
// Find the Device IDs for all the children of this hub
if (CM_Get_Child(&device_inst, dev_info_data.DevInst, 0) == CR_SUCCESS) {
device_id[0] = 0;
s = StrArrayAdd(&dev_if_path, devint_detail_data->DevicePath);
uuprintf(" Hub[%d] = '%s'", s, devint_detail_data->DevicePath);
if ((s>= 0) && (CM_Get_Device_IDA(device_inst, device_id, MAX_PATH, 0) == CR_SUCCESS)) {
if ((k = htab_hash(device_id, &htab_devid)) != 0) {
htab_devid.table[k].data = (void*)(uintptr_t)s;
}
uuprintf(" Found ID[%03d]: %s", k, device_id);
while (CM_Get_Sibling(&device_inst, device_inst, 0) == CR_SUCCESS) {
device_id[0] = 0;
if (CM_Get_Device_IDA(device_inst, device_id, MAX_PATH, 0) == CR_SUCCESS) {
if ((k = htab_hash(device_id, &htab_devid)) != 0) {
htab_devid.table[k].data = (void*)(uintptr_t)s;
}
uuprintf(" Found ID[%03d]: %s", k, device_id);
}
}
}
}
}
free(devint_detail_data);
}
}
}
SetupDiDestroyDeviceInfoList(dev_info);
}
free(device_id);
// Build a single list of Device IDs from all the storage enumerators we know of
full_list_size = 0;
ulFlags = CM_GETIDLIST_FILTER_SERVICE;
if (nWindowsVersion >= WINDOWS_7)
ulFlags |= CM_GETIDLIST_FILTER_PRESENT;
for (s=0; s<ARRAYSIZE(storage_name); s++) {
// Get a list of device IDs for all USB storage devices
// This will be used to find if a device is UASP
if (CM_Get_Device_ID_List_SizeA(&list_size[s], storage_name[s], ulFlags) != CR_SUCCESS)
list_size[s] = 0;
if (list_size[s] != 0)
full_list_size += list_size[s]-1; // remove extra NUL terminator
}
devid_list = NULL;
if (full_list_size != 0) {
full_list_size += 1; // add extra NUL terminator
devid_list = (char*)malloc(full_list_size);
if (devid_list == NULL) {
uprintf("Could not allocate Device ID list\n");
return FALSE;
}
for (s=0, i=0; s<ARRAYSIZE(storage_name); s++) {
list_start[s] = i;
if (list_size[s] > 1) {
if (CM_Get_Device_ID_ListA(storage_name[s], &devid_list[i], list_size[s], ulFlags) != CR_SUCCESS)
continue;
if (usb_debug) {
uprintf("Processing IDs belonging to %s:", storage_name[s]);
for (device_id = &devid_list[i]; *device_id != 0; device_id += strlen(device_id) + 1)
uprintf(" %s", device_id);
}
// The list_size is sometimes larger than required thus we need to find the real end
for (i += list_size[s]; i > 2; i--) {
if ((devid_list[i-2] != '\0') && (devid_list[i-1] == '\0') && (devid_list[i] == '\0'))
break;
}
}
}
}
// Now use SetupDi to enumerate all our storage devices
dev_info = SetupDiGetClassDevsA(&_GUID_DEVINTERFACE_DISK, NULL, NULL, DIGCF_PRESENT|DIGCF_DEVICEINTERFACE);
if (dev_info == INVALID_HANDLE_VALUE) {
uprintf("SetupDiGetClassDevs (Interface) failed: %s\n", WindowsErrorString());
goto out;
}
dev_info_data.cbSize = sizeof(dev_info_data);
for (i=0; SetupDiEnumDeviceInfo(dev_info, i, &dev_info_data); i++) {
memset(buffer, 0, sizeof(buffer));
method_str = "";
if (!SetupDiGetDeviceRegistryPropertyA(dev_info, &dev_info_data, SPDRP_ENUMERATOR_NAME,
&datatype, (LPBYTE)buffer, sizeof(buffer), &size)) {
uprintf("SetupDiGetDeviceRegistryProperty (Enumerator Name) failed: %s\n", WindowsErrorString());
continue;
}
// UASP drives are listed under SCSI (along with regular SYSTEM drives => "DANGER, WILL ROBINSON!!!")
is_SCSI = (safe_stricmp(buffer, scsi_name) == 0);
if ((safe_stricmp(buffer, storage_name[0]) != 0) && (!is_SCSI))
continue;
// We can't use the friendly name to find if a drive is a VHD, as friendly name string gets translated
// according to your locale, so we poke the Hardware ID
memset(&props, 0, sizeof(props));
memset(buffer, 0, sizeof(buffer));
props.is_VHD = SetupDiGetDeviceRegistryPropertyA(dev_info, &dev_info_data, SPDRP_HARDWAREID,
&datatype, (LPBYTE)buffer, sizeof(buffer), &size) && IsVHD(buffer);
uuprintf("Processing Device: '%s'", buffer);
memset(buffer, 0, sizeof(buffer));
if (!SetupDiGetDeviceRegistryPropertyA(dev_info, &dev_info_data, SPDRP_FRIENDLYNAME,
&datatype, (LPBYTE)buffer, sizeof(buffer), &size)) {
uprintf("SetupDiGetDeviceRegistryProperty (Friendly Name) failed: %s\n", WindowsErrorString());
// We can afford a failure on this call - just replace the name with "USB Storage Device (Generic)"
safe_strcpy(buffer, sizeof(buffer), lmprintf(MSG_045));
} else if ((!props.is_VHD) && (devid_list != NULL)) {
// Get the properties of the device. We could avoid doing this lookup every time by keeping
// a lookup table, but there shouldn't be that many USB storage devices connected...
// NB: Each of these Device IDs have an _only_ child, from which we get the Device Instance match.
for (device_id = devid_list; *device_id != 0; device_id += strlen(device_id) + 1) {
if ( (CM_Locate_DevNodeA(&parent_inst, device_id, 0) == CR_SUCCESS)
&& (CM_Get_Child(&device_inst, parent_inst, 0) == CR_SUCCESS)
&& (device_inst == dev_info_data.DevInst) ) {
post_backslash = FALSE;
method_str = "";
// If we're not dealing with the USBSTOR part of our list, then this is an UASP device
props.is_UASP = ((((uintptr_t)device_id)+2) >= ((uintptr_t)devid_list)+list_start[1]);
// Now get the properties of the device, and its Device ID, which we need to populate the properties
j = htab_hash(device_id, &htab_devid);
uuprintf(" Matched with ID[%03d]: %s", j, device_id);
// Try to parse the current device_id string for VID:PID
// We'll use that if we can't get anything better
for (k = 0, l = 0; (k<strlen(device_id)) && (l<2); k++) {
// The ID is in the form USB_VENDOR_BUSID\VID_xxxx&PID_xxxx\...
if (device_id[k] == '\\')
post_backslash = TRUE;
if (!post_backslash)
continue;
if (device_id[k] == '_') {
props.pid = (uint16_t)strtoul(&device_id[k + 1], NULL, 16);
if (l++ == 0)
props.vid = props.pid;
}
}
if (props.vid != 0)
method_str = "[ID]";
// If the hash didn't match a populated string in dev_if_path[] (htab_devid.table[j].data > 0),
// we might have an extra vendor driver in between (e.g. "ASUS USB 3.0 Boost Storage Driver"
// for UASP devices in ASUS "Turbo Mode" or "Apple Mobile Device USB Driver" for iPods)
// so try to see if we can match the grandparent.
if ( ((uintptr_t)htab_devid.table[j].data == 0)
&& (CM_Get_Parent(&grandparent_inst, parent_inst, 0) == CR_SUCCESS)
&& (CM_Get_Device_IDA(grandparent_inst, str, MAX_PATH, 0) == CR_SUCCESS) ) {
device_id = str;
method_str = "[GP]";
j = htab_hash(device_id, &htab_devid);
uuprintf(" Matched with (GP) ID[%03d]: %s", j, device_id);
}
if ((uintptr_t)htab_devid.table[j].data > 0) {
uuprintf(" Matched with Hub[%d]: '%s'", (uintptr_t)htab_devid.table[j].data,
dev_if_path.String[(uintptr_t)htab_devid.table[j].data]);
if (GetUSBProperties(dev_if_path.String[(uintptr_t)htab_devid.table[j].data], device_id, &props))
method_str = "";
#ifdef FORCED_DEVICE
props.vid = FORCED_VID;
props.pid = FORCED_PID;
safe_strcpy(buffer, sizeof(buffer), FORCED_NAME);
#endif
}
break;
}
}
}
if (props.is_VHD) {
uprintf("Found VHD device '%s'", buffer);
} else {
if ((props.vid == 0) && (props.pid == 0)) {
if (is_SCSI) {
// If we have an SCSI drive and couldn't get a VID:PID, we are most likely
// dealing with a system drive => eliminate it!
uuprintf(" Non USB => Eliminated");
continue;
}
safe_strcpy(str, sizeof(str), "????:????"); // Couldn't figure VID:PID
} else {
static_sprintf(str, "%04X:%04X", props.vid, props.pid);
}
if (props.speed >= USB_SPEED_MAX)
props.speed = 0;
uprintf("Found %s%s%s device '%s' (%s) %s\n", props.is_UASP?"UAS (":"",
usb_speed_name[props.speed], props.is_UASP?")":"", buffer, str, method_str);
if (props.is_LowerSpeed)
uprintf("NOTE: This device is an USB 3.0 device operating at lower speed...");
}
devint_data.cbSize = sizeof(devint_data);
hDrive = INVALID_HANDLE_VALUE;
devint_detail_data = NULL;
for (j=0; ;j++) {
safe_closehandle(hDrive);
safe_free(devint_detail_data);
if (!SetupDiEnumDeviceInterfaces(dev_info, &dev_info_data, &_GUID_DEVINTERFACE_DISK, j, &devint_data)) {
if(GetLastError() != ERROR_NO_MORE_ITEMS) {
uprintf("SetupDiEnumDeviceInterfaces failed: %s\n", WindowsErrorString());
} else {
uprintf("A device was eliminated because it didn't report itself as a disk\n");
}
break;
}
if (!SetupDiGetDeviceInterfaceDetailA(dev_info, &devint_data, NULL, 0, &size, NULL)) {
if(GetLastError() == ERROR_INSUFFICIENT_BUFFER) {
devint_detail_data = (PSP_DEVICE_INTERFACE_DETAIL_DATA_A)calloc(1, size);
if (devint_detail_data == NULL) {
uprintf("Unable to allocate data for SP_DEVICE_INTERFACE_DETAIL_DATA\n");
continue;
}
devint_detail_data->cbSize = sizeof(SP_DEVICE_INTERFACE_DETAIL_DATA_A);
} else {
uprintf("SetupDiGetDeviceInterfaceDetail (dummy) failed: %s\n", WindowsErrorString());
continue;
}
}
if (devint_detail_data == NULL) {
uprintf("SetupDiGetDeviceInterfaceDetail (dummy) - no data was allocated\n");
continue;
}
if(!SetupDiGetDeviceInterfaceDetailA(dev_info, &devint_data, devint_detail_data, size, &size, NULL)) {
uprintf("SetupDiGetDeviceInterfaceDetail (actual) failed: %s\n", WindowsErrorString());
continue;
}
hDrive = CreateFileA(devint_detail_data->DevicePath, GENERIC_READ|GENERIC_WRITE, FILE_SHARE_READ,
NULL, OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, NULL);
if(hDrive == INVALID_HANDLE_VALUE) {
uprintf("Could not open '%s': %s\n", devint_detail_data->DevicePath, WindowsErrorString());
continue;
}
drive_number = GetDriveNumber(hDrive, devint_detail_data->DevicePath);
if (drive_number < 0)
continue;
drive_index = drive_number + DRIVE_INDEX_MIN;
if (!IsMediaPresent(drive_index)) {
uprintf("Device eliminated because it appears to contain no media\n");
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
if (GetDriveLabel(drive_index, drive_letters, &label)) {
if ((!enable_HDDs) && (!props.is_VHD) &&
((score = IsHDD(drive_index, (uint16_t)props.vid, (uint16_t)props.pid, buffer)) > 0)) {
uprintf("Device eliminated because it was detected as an USB Hard Drive (score %d > 0)\n", score);
uprintf("If this device is not an USB Hard Drive, please e-mail the author of this application\n");
uprintf("NOTE: You can enable the listing of USB Hard Drives in 'Advanced Options' (after clicking the white triangle)");
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
// The empty string is returned for drives that don't have any volumes assigned
if (drive_letters[0] == 0) {
entry = lmprintf(MSG_046, label, drive_number,
SizeToHumanReadable(GetDriveSize(drive_index), FALSE, use_fake_units));
} else {
// Find the UEFI:TOGO partition(s) (and eliminate them form our listing)
for (k=0; drive_letters[k]; k++) {
uefi_togo_check[0] = drive_letters[k];
if (PathFileExistsA(uefi_togo_check)) {
for (l=k; drive_letters[l]; l++)
drive_letters[l] = drive_letters[l+1];
k--;
}
}
// We have multiple volumes assigned to the same device (multiple partitions)
// If that is the case, use "Multiple Volumes" instead of the label
safe_strcpy(entry_msg, sizeof(entry_msg), (((drive_letters[0] != 0) && (drive_letters[1] != 0))?
lmprintf(MSG_047):label));
for (k=0, remove_drive=0; drive_letters[k] && (!remove_drive); k++) {
// Append all the drive letters we detected
letter_name[2] = drive_letters[k];
if (right_to_left_mode)
safe_strcat(entry_msg, sizeof(entry_msg), RIGHT_TO_LEFT_MARK);
safe_strcat(entry_msg, sizeof(entry_msg), letter_name);
if (drive_letters[k] == (PathGetDriveNumberU(app_dir) + 'A'))
remove_drive = 1;
if (drive_letters[k] == (PathGetDriveNumberU(system_dir) + 'A'))
remove_drive = 2;
}
// Make sure that we don't list any drive that should not be listed
if (remove_drive) {
uprintf("Removing %C: from the list: This is the %s!", drive_letters[--k],
(remove_drive==1)?"disk from which " APPLICATION_NAME " is running":"system disk");
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
safe_sprintf(&entry_msg[strlen(entry_msg)], sizeof(entry_msg) - strlen(entry_msg),
"%s [%s]", (right_to_left_mode)?RIGHT_TO_LEFT_MARK:"", SizeToHumanReadable(GetDriveSize(drive_index), FALSE, use_fake_units));
entry = entry_msg;
}
// Must ensure that the combo box is UNSORTED for indexes to be the same
StrArrayAdd(&DriveID, buffer);
StrArrayAdd(&DriveLabel, label);
IGNORE_RETVAL(ComboBox_SetItemData(hDeviceList, ComboBox_AddStringU(hDeviceList, entry), drive_index));
maxwidth = max(maxwidth, GetEntryWidth(hDeviceList, entry));
safe_closehandle(hDrive);
safe_free(devint_detail_data);
break;
}
}
}
SetupDiDestroyDeviceInfoList(dev_info);
// Adjust the Dropdown width to the maximum text size
SendMessage(hDeviceList, CB_SETDROPPEDWIDTH, (WPARAM)maxwidth, 0);
if (devnum >= DRIVE_INDEX_MIN) {
for (i=0; i<ComboBox_GetCount(hDeviceList); i++) {
if ((DWORD)ComboBox_GetItemData(hDeviceList, i) == devnum) {
found = TRUE;
break;
}
}
}
if (!found)
i = 0;
IGNORE_RETVAL(ComboBox_SetCurSel(hDeviceList, i));
SendMessage(hMainDialog, WM_COMMAND, (CBN_SELCHANGE<<16) | IDC_DEVICE, 0);
SendMessage(hMainDialog, WM_COMMAND, (CBN_SELCHANGE<<16) | IDC_FILESYSTEM,
ComboBox_GetCurSel(hFileSystem));
r = TRUE;
out:
// Set 'Start' as the selected button, so that tab selection works
SendMessage(hMainDialog, WM_NEXTDLGCTL, (WPARAM)GetDlgItem(hMainDialog, IDC_START), TRUE);
safe_free(devid_list);
StrArrayDestroy(&dev_if_path);
htab_destroy(&htab_devid);
return r;
}
