SPAN_DECLARE(fax_modems_state_t *) fax_modems_init(fax_modems_state_t *s,
int use_tep,
hdlc_frame_handler_t hdlc_accept,
hdlc_underflow_handler_t hdlc_tx_underflow,
put_bit_func_t non_ecm_put_bit,
get_bit_func_t non_ecm_get_bit,
tone_report_func_t tone_callback,
void *user_data)
{
if (s == NULL)
{
if ((s = (fax_modems_state_t *) malloc(sizeof(*s))) == NULL)
return NULL;
}
memset(s, 0, sizeof(*s));
s->use_tep = use_tep;
hdlc_rx_init(&s->hdlc_rx, FALSE, FALSE, HDLC_FRAMING_OK_THRESHOLD, hdlc_accept, user_data);
hdlc_tx_init(&s->hdlc_tx, FALSE, 2, FALSE, hdlc_tx_underflow, user_data);
fsk_rx_init(&s->v21_rx, &preset_fsk_specs[FSK_V21CH2], TRUE, (put_bit_func_t) hdlc_rx_put_bit, &s->hdlc_rx);
fsk_rx_signal_cutoff(&s->v21_rx, -39.09f);
fsk_tx_init(&s->v21_tx, &preset_fsk_specs[FSK_V21CH2], (get_bit_func_t) hdlc_tx_get_bit, &s->hdlc_tx);
v17_rx_init(&s->v17_rx, 14400, non_ecm_put_bit, user_data);
v17_tx_init(&s->v17_tx, 14400, s->use_tep, non_ecm_get_bit, user_data);
v29_rx_init(&s->v29_rx, 9600, non_ecm_put_bit, user_data);
v29_rx_signal_cutoff(&s->v29_rx, -45.5f);
v29_tx_init(&s->v29_tx, 9600, s->use_tep, non_ecm_get_bit, user_data);
v27ter_rx_init(&s->v27ter_rx, 4800, non_ecm_put_bit, user_data);
v27ter_tx_init(&s->v27ter_tx, 4800, s->use_tep, non_ecm_get_bit, user_data);
silence_gen_init(&s->silence_gen, 0);
modem_connect_tones_tx_init(&s->connect_tx, MODEM_CONNECT_TONES_FAX_CNG);
if (tone_callback)
{
modem_connect_tones_rx_init(&s->connect_rx,
MODEM_CONNECT_TONES_FAX_CNG,
tone_callback,
user_data);
}
dc_restore_init(&s->dc_restore);
s->rx_signal_present = FALSE;
s->rx_handler = (span_rx_handler_t *) &span_dummy_rx;
s->rx_user_data = NULL;
s->tx_handler = (span_tx_handler_t *) &silence_gen;
s->tx_user_data = &s->silence_gen;
return s;
}
int main(int argc, char *argv[])
{
v29_rx_state_t *rx;
v29_tx_state_t *tx;
bert_results_t bert_results;
int16_t gen_amp[BLOCK_LEN];
int16_t amp[BLOCK_LEN];
SNDFILE *inhandle;
SNDFILE *outhandle;
int outframes;
int samples;
int tep;
int test_bps;
int noise_level;
int signal_level;
int bits_per_test;
int line_model_no;
int block_no;
int log_audio;
int channel_codec;
int rbs_pattern;
int opt;
logging_state_t *logging;
channel_codec = MUNGE_CODEC_NONE;
rbs_pattern = 0;
test_bps = 9600;
tep = FALSE;
line_model_no = 0;
decode_test_file = NULL;
use_gui = FALSE;
noise_level = -70;
signal_level = -13;
bits_per_test = 50000;
log_audio = FALSE;
while ((opt = getopt(argc, argv, "b:B:c:d:glm:n:r:s:t")) != -1)
{
switch (opt)
{
case 'b':
test_bps = atoi(optarg);
if (test_bps != 9600 && test_bps != 7200 && test_bps != 4800)
{
fprintf(stderr, "Invalid bit rate specified\n");
exit(2);
}
break;
case 'B':
bits_per_test = atoi(optarg);
break;
case 'c':
channel_codec = atoi(optarg);
break;
case 'd':
decode_test_file = optarg;
break;
case 'g':
#if defined(ENABLE_GUI)
use_gui = TRUE;
#else
fprintf(stderr, "Graphical monitoring not available\n");
exit(2);
#endif
break;
case 'l':
log_audio = TRUE;
break;
case 'm':
line_model_no = atoi(optarg);
break;
case 'n':
noise_level = atoi(optarg);
break;
case 'r':
rbs_pattern = atoi(optarg);
break;
case 's':
signal_level = atoi(optarg);
break;
case 't':
tep = TRUE;
break;
default:
//usage();
exit(2);
break;
}
}
inhandle = NULL;
outhandle = NULL;
#if defined(HAVE_FENV_H)
fpe_trap_setup();
#endif
if (log_audio)
{
if ((outhandle = sf_open_telephony_write(OUT_FILE_NAME, 1)) == NULL)
{
fprintf(stderr, " Cannot create audio file '%s'\n", OUT_FILE_NAME);
exit(2);
}
}
if (decode_test_file)
{
/* We will decode the audio from a file. */
tx = NULL;
if ((inhandle = sf_open_telephony_read(decode_test_file, 1)) == NULL)
{
fprintf(stderr, " Cannot open audio file '%s'\n", decode_test_file);
exit(2);
}
}
else
{
/* We will generate V.29 audio, and add some noise to it. */
tx = v29_tx_init(NULL, test_bps, tep, v29getbit, NULL);
logging = v29_tx_get_logging_state(tx);
span_log_set_level(logging, SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_FLOW);
span_log_set_tag(logging, "V.29-tx");
v29_tx_power(tx, signal_level);
v29_tx_set_modem_status_handler(tx, v29_tx_status, (void *) tx);
#if defined(WITH_SPANDSP_INTERNALS)
/* Move the carrier off a bit */
tx->carrier_phase_rate = dds_phase_ratef(1710.0f);
tx->carrier_phase = 0;
#endif
bert_init(&bert, bits_per_test, BERT_PATTERN_ITU_O152_11, test_bps, 20);
bert_set_report(&bert, 10000, reporter, NULL);
if ((line_model = one_way_line_model_init(line_model_no, (float) noise_level, channel_codec, rbs_pattern)) == NULL)
{
fprintf(stderr, " Failed to create line model\n");
exit(2);
}
}
rx = v29_rx_init(NULL, test_bps, v29putbit, NULL);
logging = v29_rx_get_logging_state(rx);
span_log_set_level(logging, SPAN_LOG_SHOW_SEVERITY | SPAN_LOG_SHOW_PROTOCOL | SPAN_LOG_FLOW);
span_log_set_tag(logging, "V.29-rx");
v29_rx_signal_cutoff(rx, -45.5f);
v29_rx_set_modem_status_handler(rx, v29_rx_status, (void *) rx);
v29_rx_set_qam_report_handler(rx, qam_report, (void *) rx);
#if defined(WITH_SPANDSP_INTERNALS)
/* Rotate the starting phase */
rx->carrier_phase = 0x80000000;
#endif
#if defined(ENABLE_GUI)
if (use_gui)
{
qam_monitor = qam_monitor_init(6.0f, V29_CONSTELLATION_SCALING_FACTOR, NULL);
if (!decode_test_file)
{
start_line_model_monitor(129);
line_model_monitor_line_model_update(line_model->near_filter, line_model->near_filter_len);
}
}
#endif
memset(&latest_results, 0, sizeof(latest_results));
for (block_no = 0; ; block_no++)
{
if (decode_test_file)
{
samples = sf_readf_short(inhandle, amp, BLOCK_LEN);
#if defined(ENABLE_GUI)
if (use_gui)
qam_monitor_update_audio_level(qam_monitor, amp, samples);
#endif
if (samples == 0)
break;
}
else
{
samples = v29_tx(tx, gen_amp, BLOCK_LEN);
#if defined(ENABLE_GUI)
if (use_gui)
qam_monitor_update_audio_level(qam_monitor, gen_amp, samples);
#endif
if (samples == 0)
{
/* Push a little silence through, to ensure all the data bits get out of the buffers */
vec_zeroi16(amp, BLOCK_LEN);
v29_rx(rx, amp, BLOCK_LEN);
/* Note that we might get a few bad bits as the carrier shuts down. */
bert_result(&bert, &bert_results);
fprintf(stderr, "Final result %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, bert_results.total_bits, bert_results.bad_bits, bert_results.resyncs);
fprintf(stderr, "Last report %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, latest_results.total_bits, latest_results.bad_bits, latest_results.resyncs);
/* See if bit errors are appearing yet. Also check we are getting enough bits out of the receiver. The last regular report
should be error free, though the final report will generally contain bits errors as the carrier was dying. The total
number of bits out of the receiver should be at least the number we sent. Also, since BERT sync should have occurred
rapidly at the start of transmission, the last report should have occurred at not much less than the total number of
bits we sent. */
if (bert_results.total_bits < bits_per_test
||
latest_results.total_bits < bits_per_test - 100
||
latest_results.bad_bits != 0)
{
break;
}
memset(&latest_results, 0, sizeof(latest_results));
signal_level--;
v29_tx_restart(tx, test_bps, tep);
v29_tx_power(tx, signal_level);
v29_rx_restart(rx, test_bps, FALSE);
#if defined(WITH_SPANDSP_INTERNALS)
rx->eq_put_step = rand()%(48*10/3);
#endif
bert_init(&bert, bits_per_test, BERT_PATTERN_ITU_O152_11, test_bps, 20);
bert_set_report(&bert, 10000, reporter, NULL);
one_way_line_model_release(line_model);
if ((line_model = one_way_line_model_init(line_model_no, (float) noise_level, channel_codec, 0)) == NULL)
{
fprintf(stderr, " Failed to create line model\n");
exit(2);
}
}
if (log_audio)
{
outframes = sf_writef_short(outhandle, gen_amp, samples);
if (outframes != samples)
{
fprintf(stderr, " Error writing audio file\n");
exit(2);
}
}
one_way_line_model(line_model, amp, gen_amp, samples);
}
#if defined(ENABLE_GUI)
if (use_gui && !decode_test_file)
line_model_monitor_line_spectrum_update(amp, samples);
#endif
v29_rx(rx, amp, samples);
}
if (!decode_test_file)
{
bert_result(&bert, &bert_results);
fprintf(stderr, "At completion:\n");
fprintf(stderr, "Final result %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, bert_results.total_bits, bert_results.bad_bits, bert_results.resyncs);
fprintf(stderr, "Last report %ddBm0/%ddBm0, %d bits, %d bad bits, %d resyncs\n", signal_level, noise_level, latest_results.total_bits, latest_results.bad_bits, latest_results.resyncs);
one_way_line_model_release(line_model);
if (signal_level > -43)
{
printf("Tests failed.\n");
exit(2);
}
printf("Tests passed.\n");
}
#if defined(ENABLE_GUI)
if (use_gui)
qam_wait_to_end(qam_monitor);
#endif
if (decode_test_file)
{
if (sf_close_telephony(inhandle))
{
fprintf(stderr, " Cannot close audio file '%s'\n", decode_test_file);
exit(2);
}
}
if (log_audio)
{
if (sf_close_telephony(outhandle))
{
fprintf(stderr, " Cannot close audio file '%s'\n", OUT_FILE_NAME);
exit(2);
}
}
return 0;
}
SPAN_DECLARE(void) fax_modems_start_fast_modem(fax_modems_state_t *s, int which, int bit_rate, int short_train, int hdlc_mode)
{
put_bit_func_t put_bit;
get_bit_func_t get_bit;
void *get_bit_user_data;
void *put_bit_user_data;
s->bit_rate = bit_rate;
if (hdlc_mode)
{
get_bit = (get_bit_func_t) hdlc_tx_get_bit;
get_bit_user_data = (void *) &s->hdlc_tx;
put_bit = (put_bit_func_t) hdlc_rx_put_bit;
put_bit_user_data = (void *) &s->hdlc_rx;
}
else
{
get_bit = s->get_bit;
get_bit_user_data = s->get_bit_user_data;
put_bit = s->put_bit;
put_bit_user_data = s->put_bit_user_data;
}
/*endif*/
/* If we change modems we need to do a complete reinitialisation of the modem, because
the modems use overlapping memory. */
if (s->fast_modem != which)
{
s->current_rx_type = which;
s->short_train = false;
s->fast_modem = which;
if (hdlc_mode)
s->rx_frame_received = false;
switch (s->fast_modem)
{
case FAX_MODEM_V27TER_RX:
v27ter_rx_init(&s->fast_modems.v27ter_rx, s->bit_rate, put_bit, put_bit_user_data);
v27ter_rx_set_modem_status_handler(&s->fast_modems.v27ter_rx, v27ter_rx_status_handler, s);
fax_modems_set_rx_handler(s, (span_rx_handler_t) &fax_modems_v27ter_v21_rx, s, (span_rx_fillin_handler_t) &fax_modems_v27ter_v21_rx_fillin, s);
break;
case FAX_MODEM_V29_RX:
v29_rx_init(&s->fast_modems.v29_rx, s->bit_rate, put_bit, put_bit_user_data);
v29_rx_signal_cutoff(&s->fast_modems.v29_rx, -45.5f);
v29_rx_set_modem_status_handler(&s->fast_modems.v29_rx, v29_rx_status_handler, s);
fax_modems_set_rx_handler(s, (span_rx_handler_t) &fax_modems_v29_v21_rx, s, (span_rx_fillin_handler_t) &fax_modems_v29_v21_rx_fillin, s);
break;
case FAX_MODEM_V17_RX:
v17_rx_init(&s->fast_modems.v17_rx, s->bit_rate, put_bit, put_bit_user_data);
v17_rx_set_modem_status_handler(&s->fast_modems.v17_rx, v17_rx_status_handler, s);
fax_modems_set_rx_handler(s, (span_rx_handler_t) &fax_modems_v17_v21_rx, s, (span_rx_fillin_handler_t) &fax_modems_v17_v21_rx_fillin, s);
break;
case FAX_MODEM_V27TER_TX:
v27ter_tx_init(&s->fast_modems.v27ter_tx, s->bit_rate, s->use_tep, get_bit, get_bit_user_data);
fax_modems_set_tx_handler(s, (span_tx_handler_t) &v27ter_tx, &s->fast_modems.v27ter_tx);
fax_modems_set_next_tx_handler(s, (span_tx_handler_t) NULL, NULL);
break;
case FAX_MODEM_V29_TX:
v29_tx_init(&s->fast_modems.v29_tx, s->bit_rate, s->use_tep, get_bit, get_bit_user_data);
fax_modems_set_tx_handler(s, (span_tx_handler_t) &v29_tx, &s->fast_modems.v29_tx);
fax_modems_set_next_tx_handler(s, (span_tx_handler_t) NULL, NULL);
break;
case FAX_MODEM_V17_TX:
v17_tx_init(&s->fast_modems.v17_tx, s->bit_rate, s->use_tep, get_bit, get_bit_user_data);
fax_modems_set_tx_handler(s, (span_tx_handler_t) &v17_tx, &s->fast_modems.v17_tx);
fax_modems_set_next_tx_handler(s, (span_tx_handler_t) NULL, NULL);
break;
}
/*endswitch*/
}
else
{
s->short_train = short_train;
switch (s->fast_modem)
{
case FAX_MODEM_V27TER_RX:
v27ter_rx_restart(&s->fast_modems.v27ter_rx, s->bit_rate, false);
v27ter_rx_set_put_bit(&s->fast_modems.v27ter_rx, put_bit, put_bit_user_data);
v27ter_rx_set_modem_status_handler(&s->fast_modems.v27ter_rx, v27ter_rx_status_handler, s);
fax_modems_set_rx_handler(s, (span_rx_handler_t) &fax_modems_v27ter_v21_rx, s, (span_rx_fillin_handler_t) &fax_modems_v27ter_v21_rx_fillin, s);
break;
case FAX_MODEM_V29_RX:
v29_rx_restart(&s->fast_modems.v29_rx, s->bit_rate, false);
v29_rx_set_put_bit(&s->fast_modems.v29_rx, put_bit, put_bit_user_data);
v29_rx_set_modem_status_handler(&s->fast_modems.v29_rx, v29_rx_status_handler, s);
fax_modems_set_rx_handler(s, (span_rx_handler_t) &fax_modems_v29_v21_rx, s, (span_rx_fillin_handler_t) &fax_modems_v29_v21_rx_fillin, s);
break;
case FAX_MODEM_V17_RX:
v17_rx_restart(&s->fast_modems.v17_rx, s->bit_rate, s->short_train);
v17_rx_set_put_bit(&s->fast_modems.v17_rx, put_bit, put_bit_user_data);
v17_rx_set_modem_status_handler(&s->fast_modems.v17_rx, v17_rx_status_handler, s);
fax_modems_set_rx_handler(s, (span_rx_handler_t) &fax_modems_v17_v21_rx, s, (span_rx_fillin_handler_t) &fax_modems_v17_v21_rx_fillin, s);
break;
case FAX_MODEM_V27TER_TX:
v27ter_tx_restart(&s->fast_modems.v27ter_tx, s->bit_rate, s->use_tep);
v27ter_tx_set_get_bit(&s->fast_modems.v27ter_tx, get_bit, get_bit_user_data);
fax_modems_set_tx_handler(s, (span_tx_handler_t) &v27ter_tx, &s->fast_modems.v27ter_tx);
fax_modems_set_next_tx_handler(s, (span_tx_handler_t) NULL, NULL);
break;
case FAX_MODEM_V29_TX:
v29_tx_restart(&s->fast_modems.v29_tx, s->bit_rate, s->use_tep);
v29_tx_set_get_bit(&s->fast_modems.v29_tx, get_bit, get_bit_user_data);
fax_modems_set_tx_handler(s, (span_tx_handler_t) &v29_tx, &s->fast_modems.v29_tx);
fax_modems_set_next_tx_handler(s, (span_tx_handler_t) NULL, NULL);
break;
case FAX_MODEM_V17_TX:
v17_tx_restart(&s->fast_modems.v17_tx, s->bit_rate, s->use_tep, s->short_train);
v17_tx_set_get_bit(&s->fast_modems.v17_tx, get_bit, get_bit_user_data);
fax_modems_set_tx_handler(s, (span_tx_handler_t) &v17_tx, &s->fast_modems.v17_tx);
fax_modems_set_next_tx_handler(s, (span_tx_handler_t) NULL, NULL);
break;
}
/*endswitch*/
}
/*endif*/
}
fax_state_t *fax_init(fax_state_t *s, int calling_party)
{
if (s == NULL)
{
if ((s = (fax_state_t *) malloc(sizeof(*s))) == NULL)
return NULL;
}
memset(s, 0, sizeof(*s));
span_log_init(&s->logging, SPAN_LOG_NONE, NULL);
span_log_set_protocol(&s->logging, "FAX");
t30_init(&(s->t30_state),
calling_party,
fax_set_rx_type,
(void *) s,
fax_set_tx_type,
(void *) s,
fax_send_hdlc,
(void *) s);
t30_set_supported_modems(&(s->t30_state),
T30_SUPPORT_V27TER | T30_SUPPORT_V29);
hdlc_rx_init(&(s->hdlcrx), FALSE, FALSE, 5, t30_hdlc_accept, &(s->t30_state));
fsk_rx_init(&(s->v21rx), &preset_fsk_specs[FSK_V21CH2], TRUE, (put_bit_func_t) hdlc_rx_put_bit, &(s->hdlcrx));
fsk_rx_signal_cutoff(&(s->v21rx), -45.5);
hdlc_tx_init(&(s->hdlctx), FALSE, 2, FALSE, hdlc_underflow_handler, &(s->t30_state));
s->first_tx_hdlc_frame = TRUE;
fsk_tx_init(&(s->v21tx), &preset_fsk_specs[FSK_V21CH2], (get_bit_func_t) hdlc_tx_get_bit, &(s->hdlctx));
v17_rx_init(&(s->v17rx), 14400, t30_non_ecm_put_bit, &(s->t30_state));
v17_tx_init(&(s->v17tx), 14400, s->use_tep, t30_non_ecm_get_bit, &(s->t30_state));
v29_rx_init(&(s->v29rx), 9600, t30_non_ecm_put_bit, &(s->t30_state));
v29_rx_signal_cutoff(&(s->v29rx), -45.5);
v29_tx_init(&(s->v29tx), 9600, s->use_tep, t30_non_ecm_get_bit, &(s->t30_state));
v27ter_rx_init(&(s->v27ter_rx), 4800, t30_non_ecm_put_bit, &(s->t30_state));
v27ter_tx_init(&(s->v27ter_tx), 4800, s->use_tep, t30_non_ecm_get_bit, &(s->t30_state));
silence_gen_init(&(s->silence_gen), 0);
dc_restore_init(&(s->dc_restore));
t30_restart(&(s->t30_state));
#if defined(LOG_FAX_AUDIO)
{
char buf[100 + 1];
struct tm *tm;
time_t now;
time(&now);
tm = localtime(&now);
sprintf(buf,
"/tmp/fax-rx-audio-%x-%02d%02d%02d%02d%02d%02d",
s,
tm->tm_year%100,
tm->tm_mon + 1,
tm->tm_mday,
tm->tm_hour,
tm->tm_min,
tm->tm_sec);
s->fax_audio_rx_log = open(buf, O_CREAT | O_TRUNC | O_WRONLY, 0666);
sprintf(buf,
"/tmp/fax-tx-audio-%x-%02d%02d%02d%02d%02d%02d",
s,
tm->tm_year%100,
tm->tm_mon + 1,
tm->tm_mday,
tm->tm_hour,
tm->tm_min,
tm->tm_sec);
s->fax_audio_tx_log = open(buf, O_CREAT | O_TRUNC | O_WRONLY, 0666);
}
#endif
return s;
}
