void main ()
{
WDTCTL = WDTPW | WDTHOLD;
#if BSP430_LED - 0
vBSP430ledInitialize_ni();
{
int i;
vBSP430ledSet(0, 1);
for (i = 0; i < 20; ++i) {
vBSP430ledSet(0, -1);
vBSP430ledSet(1, -1);
__delay_cycles(BSP430_CLOCK_PUC_MCLK_HZ / 10);
}
/* The subsequent vBSP430lpmConfigurePortsForLPM_ni() call should
* turn off the LED that's still lit. */
}
#endif
vBSP430lpmConfigurePortsForLPM_ni();
__delay_cycles(BSP430_CLOCK_PUC_MCLK_HZ);
while (1) {
#if (0 <= APP_LPM) && (APP_LPM <= 4)
BSP430_CORE_LPM_ENTER_NI(lpm_bits[APP_LPM]);
/* For this application it doesn't matter that GIE is now set */
#endif
}
}
void
vBSP430platformSpinForJumper_ni (void)
{
/* P1.2 input with pullup */
P1SEL &= ~BIT2;
P1DIR &= ~BIT2;
P1REN |= BIT2;
P1OUT |= BIT2;
#if BSP430_LED
vBSP430ledInitialize_ni();
#else /* BSP430_LED */
P1DIR |= (BIT0 | BIT1);
P1SEL &= ~(BIT0 | BIT1);
#endif /* BSP430_LED */
P1OUT |= BIT0;
while (! (P1IN & BIT2)) {
BSP430_CORE_WATCHDOG_CLEAR();
BSP430_CORE_DELAY_CYCLES(BSP430_CLOCK_NOMINAL_MCLK_HZ / 10);
P1OUT ^= BIT0 | BIT1;
}
/* Restore P1.2 */
P1OUT &= ~(BIT0 | BIT1 | BIT2);
P1DIR |= BIT2;
P1REN &= ~BIT2;
}
void vBSP430platformInitialize_ni (void)
{
int crystal_ok = 0;
(void)crystal_ok;
#if BSP430_PLATFORM_BOOT_DISABLE_WATCHDOG - 0
/* Hold off watchdog */
WDTCTL = WDTPW | WDTHOLD;
#endif /* configBSP430_CORE_SUPPORT_WATCHDOG */
#if (BSP430_PLATFORM_BOOT_CONFIGURE_LEDS - 0) && (BSP430_LED - 0)
vBSP430ledInitialize_ni();
#endif /* BSP430_PLATFORM_BOOT_CONFIGURE_LEDS */
#if BSP430_PLATFORM_BOOT_CONFIGURE_LFXT1 - 0
/* Enable XT1 functions and clock */
crystal_ok = iBSP430clockConfigureLFXT1_ni(1, (BSP430_PLATFORM_BOOT_LFXT1_DELAY_SEC * BSP430_CLOCK_PUC_MCLK_HZ) / BSP430_CLOCK_LFXT1_STABILIZATION_DELAY_CYCLES);
#endif /* BSP430_PLATFORM_BOOT_CONFIGURE_LFXT1 */
#if BSP430_PLATFORM_BOOT_CONFIGURE_CLOCKS - 0
iBSP430clockConfigureACLK_ni(BSP430_PLATFORM_BOOT_ACLKSRC);
ulBSP430clockConfigureMCLK_ni(BSP430_CLOCK_NOMINAL_MCLK_HZ);
iBSP430clockConfigureSMCLKDividingShift_ni(BSP430_CLOCK_NOMINAL_SMCLK_DIVIDING_SHIFT);
#if configBSP430_CORE_DISABLE_FLL - 0
__bis_status_register(SCG0);
#endif /* configBSP430_CORE_DISABLE_FLL */
#endif /* BSP430_PLATFORM_BOOT_CONFIGURE_CLOCKS */
#if BSP430_UPTIME - 0
vBSP430uptimeStart_ni();
#endif /* BSP430_UPTIME */
}
void
vBSP430platformSpinForJumper_ni (void)
{
const unsigned char led_bits = BIT1 | BIT2 | BIT3 | BIT4 | BIT5;
/* P7.7 input configured with pullup */
P7DIR &= ~BIT7;
P7REN |= BIT7;
P7OUT |= BIT7;
/* Flash LEDs alternately while waiting */
#if BSP430_LED
vBSP430ledInitialize_ni();
#else /* BSP430_LED */
P1DIR |= led_bits;
P1SEL &= ~led_bits;
#endif /* BSP430_LED */
P1OUT &= ~(BIT2 | BIT4);
P1OUT |= BIT1 | BIT3 | BIT5;
while (! (P7IN & BIT7)) {
BSP430_CORE_WATCHDOG_CLEAR();
BSP430_CORE_DELAY_CYCLES(BSP430_CLOCK_NOMINAL_MCLK_HZ / 10);
P1OUT ^= led_bits;
}
/* Restore P1.0 and LEDs */
P1OUT &= ~led_bits;
P7OUT &= ~BIT7;
P7DIR |= BIT7;
P7REN &= ~BIT7;
}
